Showing 1–50 of 53 results for author: Ibrahim, K

Scalable Training of Graph Foundation Models for Atomistic Materials Modeling: A Case Study with HydraGNN

Authors: Massimiliano Lupo Pasini, Jong Youl Choi, Kshitij Mehta, Pei Zhang, David Rogers, Jonghyun Bae, Khaled Z. Ibrahim, Ashwin M. Aji, Karl W. Schulz, Jorda Polo, Prasanna Balaprakash

Abstract: We present our work on develo** and training scalable graph foundation models (GFM) using HydraGNN, a multi-headed graph convolutional neural network architecture. HydraGNN expands the boundaries of graph neural network (GNN) in both training scale and data diversity. It abstracts over message passing algorithms, allowing both reproduction of and comparison across algorithmic innovations that de… ▽ More We present our work on develo** and training scalable graph foundation models (GFM) using HydraGNN, a multi-headed graph convolutional neural network architecture. HydraGNN expands the boundaries of graph neural network (GNN) in both training scale and data diversity. It abstracts over message passing algorithms, allowing both reproduction of and comparison across algorithmic innovations that define convolution in GNNs. This work discusses a series of optimizations that have allowed scaling up the GFM training to tens of thousands of GPUs on datasets that consist of hundreds of millions of graphs. Our GFMs use multi-task learning (MTL) to simultaneously learn graph-level and node-level properties of atomistic structures, such as the total energy and atomic forces. Using over 150 million atomistic structures for training, we illustrate the performance of our approach along with the lessons learned on two United States Department of Energy (US-DOE) supercomputers, namely the Perlmutter petascale system at the National Energy Research Scientific Computing Center and the Frontier exascale system at Oak Ridge National Laboratory. The HydraGNN architecture enables the GFM to achieve near-linear strong scaling performance using more than 2,000 GPUs on Perlmutter and 16,000 GPUs on Frontier. Hyperparameter optimization (HPO) was performed on over 64,000 GPUs on Frontier to select GFM architectures with high accuracy. Early stop** was applied on each GFM architecture for energy awareness in performing such an extreme-scale task. The training of an ensemble of highest-ranked GFM architectures continued until convergence to establish uncertainty quantification (UQ) capabilities with ensemble learning. Our contribution opens the door for rapidly develo**, training, and deploying GFMs using large-scale computational resources to enable AI-accelerated materials discovery and design. △ Less

Submitted 28 June, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Comments: 16 pages, 13 figures

MSC Class: 68T07; 68T09 ACM Class: C.2.4; I.2.11

Cost-Effective Methodology for Complex Tuning Searches in HPC: Navigating Interdependencies and Dimensionality

Authors: Adrian Perez Dieguez, Min Choi, Mahmut Okyay, Mauro Del Ben, Bryan M. Wong, Khaled Z. Ibrahim

Abstract: Tuning searches are pivotal in High-Performance Computing (HPC), addressing complex optimization challenges in computational applications. The complexity arises not only from finely tuning parameters within routines but also potential interdependencies among them, rendering traditional optimization methods inefficient. Instead of scrutinizing interdependencies among parameters and routines, practi… ▽ More Tuning searches are pivotal in High-Performance Computing (HPC), addressing complex optimization challenges in computational applications. The complexity arises not only from finely tuning parameters within routines but also potential interdependencies among them, rendering traditional optimization methods inefficient. Instead of scrutinizing interdependencies among parameters and routines, practitioners often face the dilemma of conducting independent tuning searches for each routine, thereby overlooking interdependence, or pursuing a more resource-intensive joint search for all routines. This decision is driven by the consideration that some interdependence analysis and high-dimensional decomposition techniques in literature may be prohibitively expensive in HPC tuning searches. Our methodology adapts and refines these methods to ensure computational feasibility while maximizing performance gains in real-world scenarios. Our methodology leverages a cost-effective interdependence analysis to decide whether to merge several tuning searches into a joint search or conduct orthogonal searches. Tested on synthetic functions with varying levels of parameter interdependence, our methodology efficiently explores the search space. In comparison to Bayesian-optimization-based full independent or fully joint searches, our methodology suggested an optimized breakdown of independent and merged searches that led to final configurations up to 8% more accurate, reducing the search time by up to 95%. When applied to GPU-offloaded Real-Time Time-Dependent Density Functional Theory (RT-TDDFT), an application in computational materials science that challenges modern HPC autotuners, our methodology achieved an effective tuning search. Its adaptability and efficiency extend beyond RT-TDDFT, making it valuable for related applications in HPC. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Sparse-Stochastic Fragmented Exchange for Large-Scale Hybrid TDDFT Calculations

Authors: Mykola Sereda, Tucker Allen, Nadine C. Bradbury, Khaled Z. Ibrahim, Daniel Neuhauser

Abstract: We extend our recently developed sparse-stochastic fragmented exchange formalism for ground-state hybrid DFT (ngH-DFT) to calculate absorption spectra within linear-response time-dependent Generalized Kohn-Sham DFT (LR-GKS-TDDFT), for systems consisting of thousands of valence electrons within a grid-based/plane-wave representation. A mixed deterministic/fragmented-stochastic compression of the ex… ▽ More We extend our recently developed sparse-stochastic fragmented exchange formalism for ground-state hybrid DFT (ngH-DFT) to calculate absorption spectra within linear-response time-dependent Generalized Kohn-Sham DFT (LR-GKS-TDDFT), for systems consisting of thousands of valence electrons within a grid-based/plane-wave representation. A mixed deterministic/fragmented-stochastic compression of the exchange kernel, here using long-range explicit exchange functionals, provides an efficient method for accurate optical spectra. Both real-time propagation as well frequency-resolved Casida-equation-type approaches for spectra are presented, and the method is applied to large molecular dyes. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: 22 pages, 4 figures. First two authors are equal contributors to this work and designated as co-first authors

An Evaluation of Real-time Adaptive Sampling Change Point Detection Algorithm using KCUSUM

Authors: Vijayalakshmi Saravanan, Perry Siehien, Shinjae Yoo, Hubertus Van Dam, Thomas Flynn, Christopher Kelly, Khaled Z Ibrahim

Abstract: Detecting abrupt changes in real-time data streams from scientific simulations presents a challenging task, demanding the deployment of accurate and efficient algorithms. Identifying change points in live data stream involves continuous scrutiny of incoming observations for deviations in their statistical characteristics, particularly in high-volume data scenarios. Maintaining a balance between su… ▽ More Detecting abrupt changes in real-time data streams from scientific simulations presents a challenging task, demanding the deployment of accurate and efficient algorithms. Identifying change points in live data stream involves continuous scrutiny of incoming observations for deviations in their statistical characteristics, particularly in high-volume data scenarios. Maintaining a balance between sudden change detection and minimizing false alarms is vital. Many existing algorithms for this purpose rely on known probability distributions, limiting their feasibility. In this study, we introduce the Kernel-based Cumulative Sum (KCUSUM) algorithm, a non-parametric extension of the traditional Cumulative Sum (CUSUM) method, which has gained prominence for its efficacy in online change point detection under less restrictive conditions. KCUSUM splits itself by comparing incoming samples directly with reference samples and computes a statistic grounded in the Maximum Mean Discrepancy (MMD) non-parametric framework. This approach extends KCUSUM's pertinence to scenarios where only reference samples are available, such as atomic trajectories of proteins in vacuum, facilitating the detection of deviations from the reference sample without prior knowledge of the data's underlying distribution. Furthermore, by harnessing MMD's inherent random-walk structure, we can theoretically analyze KCUSUM's performance across various use cases, including metrics like expected delay and mean runtime to false alarms. Finally, we discuss real-world use cases from scientific simulations such as NWChem CODAR and protein folding data, demonstrating KCUSUM's practical effectiveness in online change point detection. △ Less

Submitted 4 April, 2024; v1 submitted 15 February, 2024; originally announced February 2024.

Comments: 16 pages. arXiv admin note: text overlap with arXiv:1903.01661

MSC Class: CCS

Efficient Quasiparticle Determination beyond the Diagonal Approximation via Random Compression

Authors: Annabelle Canestraight, Xiaohe Lei, Khaled Ibrahim, Vojtech Vlcek

Abstract: Calculations of excited states in Green's function formalism often invoke the diagonal approximation, in which the quasiparticle states are taken from a mean-field calculation. Here, we extend the stochastic approaches applied in the many-body perturbation theory and overcome this limitation for large systems in which we are interested in a small subset of states. We separate the problem into a co… ▽ More Calculations of excited states in Green's function formalism often invoke the diagonal approximation, in which the quasiparticle states are taken from a mean-field calculation. Here, we extend the stochastic approaches applied in the many-body perturbation theory and overcome this limitation for large systems in which we are interested in a small subset of states. We separate the problem into a core subspace, whose coupling to the remainder of the system environment is stochastically sampled. This method is exemplified on computing hole injection energies into CO$_2$ on an extended gold surface with nearly 3000 electrons. We find that in the extended system, the size of the problem can be compressed up to $95\%$ using stochastic sampling. This result provides a way forward for self-consistent stochastic methods and determining Dyson orbitals in large systems. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Velocity-gauge real-time time-dependent density functional tight-binding for large-scale condensed matter systems

Authors: Qiang Xu, Mauro Del Ben, Mahmut Sait Okyay, Min Choi, Khaled Z. Ibrahim, Bryan M. Wong

Abstract: We present a new velocity-gauge real-time, time-dependent density functional tight-binding (VG-rtTDDFTB) implementation in the open-source DFTB+ software package (https://dftbplus.org) for probing electronic excitations in large, condensed matter systems. Our VG-rtTDDFTB approach enables real-time electron dynamics simulations of large, periodic, condensed matter systems containing thousands of at… ▽ More We present a new velocity-gauge real-time, time-dependent density functional tight-binding (VG-rtTDDFTB) implementation in the open-source DFTB+ software package (https://dftbplus.org) for probing electronic excitations in large, condensed matter systems. Our VG-rtTDDFTB approach enables real-time electron dynamics simulations of large, periodic, condensed matter systems containing thousands of atoms with a favorable computational scaling as a function of system size. We provide computational details and benchmark calculations to demonstrate its accuracy and computational parallelizability on a variety of large material systems. As a representative example, we calculate laser-induced electron dynamics in a 512-atom amorphous silicon supercell to highlight the large periodic systems that can be examined with our implementation. Taken together, our VG-rtTDDFTB approach enables new electron dynamics simulations of complex systems that require large periodic supercells, such as crystal defects, complex surfaces, nanowires, and amorphous materials. △ Less

Submitted 21 May, 2024; v1 submitted 18 August, 2023; originally announced August 2023.

Comments: 23 pages, 6 figures

Journal ref: J. Chem. Theory Comput., 19, 22, 7989-7997 (2024)

Optimized Attenuated Interaction: Enabling Stochastic Bethe-Salpeter Spectra for Large Systems

Authors: Nadine C. Bradbury, Tucker Allen, Minh Nguyen, Khaled Ibrahim, Daniel Neuhauser

Abstract: We develop an improved stochastic formalism for the Bethe-Salpeter equation, based on an exact separation of the effective-interaction $W$ to two parts, $W=(W-v_W)+v_W$ where the latter is formally any translationally-invariant interaction $v_W(r-r')$. When optimizing the fit of $v_W$ exchange kernel to $W$, by using a stochastic sampling of $W$, the difference $W-v_W$ becomes quite small. Then, i… ▽ More We develop an improved stochastic formalism for the Bethe-Salpeter equation, based on an exact separation of the effective-interaction $W$ to two parts, $W=(W-v_W)+v_W$ where the latter is formally any translationally-invariant interaction $v_W(r-r')$. When optimizing the fit of $v_W$ exchange kernel to $W$, by using a stochastic sampling of $W$, the difference $W-v_W$ becomes quite small. Then, in the main BSE routine, this small difference is stochastically sampled. The number of stochastic samples needed for an accurate spectrum is then largely independent of system size. While the method is formally cubic in scaling, the scaling prefactor is small due to the constant number of stochastic orbitals needed for sampling $W$. △ Less

Submitted 15 February, 2023; v1 submitted 14 February, 2023; originally announced February 2023.

Comments: 9 pages, 5 figures, 2 tables

A new PCA-based utility measure for synthetic data evaluation

Authors: F. K. Dankar, M. K. Ibrahim

Abstract: Data synthesis is a privacy enhancing technology aiming to produce realistic and timely data when real data is hard to obtain. Utility of synthetic data generators (SDGs) has been investigated through different utility metrics. These metrics have been found to generate conflicting conclusions making direct comparison of SDGs surprisingly difficult. Moreover, prior research found no correlation bet… ▽ More Data synthesis is a privacy enhancing technology aiming to produce realistic and timely data when real data is hard to obtain. Utility of synthetic data generators (SDGs) has been investigated through different utility metrics. These metrics have been found to generate conflicting conclusions making direct comparison of SDGs surprisingly difficult. Moreover, prior research found no correlation between popular metrics, concluding they tackle different utility-dimensions. This paper aggregates four popular utility metrics (representing different utility dimensions) into one using principal-component-analysis and checks whether the new measure can generate synthetic data that perform well in real-life. The new measure is used to compare four well-recognized SDGs. △ Less

Submitted 26 November, 2022; originally announced December 2022.

Comments: 20 pages, 5 figures, 8 tables, 1 appendix

MSC Class: 68Txx ACM Class: I.0

Exploiting Device and Audio Data to Tag Music with User-Aware Listening Contexts

Authors: Karim M. Ibrahim, Elena V. Epure, Geoffroy Peeters, Gaël Richard

Abstract: As music has become more available especially on music streaming platforms, people have started to have distinct preferences to fit to their varying listening situations, also known as context. Hence, there has been a growing interest in considering the user's situation when recommending music to users. Previous works have proposed user-aware autotaggers to infer situation-related tags from music… ▽ More As music has become more available especially on music streaming platforms, people have started to have distinct preferences to fit to their varying listening situations, also known as context. Hence, there has been a growing interest in considering the user's situation when recommending music to users. Previous works have proposed user-aware autotaggers to infer situation-related tags from music content and user's global listening preferences. However, in a practical music retrieval system, the autotagger could be only used by assuming that the context class is explicitly provided by the user. In this work, for designing a fully automatised music retrieval system, we propose to disambiguate the user's listening information from their stream data. Namely, we propose a system which can generate a situational playlist for a user at a certain time 1) by leveraging user-aware music autotaggers, and 2) by automatically inferring the user's situation from stream data (e.g. device, network) and user's general profile information (e.g. age). Experiments show that such a context-aware personalized music retrieval system is feasible, but the performance decreases in the case of new users, new tracks or when the number of context classes increases. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: Published in ISMIR

Dynamic Mode Decomposition for Extrapolating Non-equilibrium Green's Functions Dynamics

Authors: Cian C. Reeves, Jia Yin, Yuanran Zhu, Khaled Z. Ibrahim, Chao Yang, Vojtech Vlcek

Abstract: The HF-GKBA offers an approximate numerical procedure for propagating the two-time non-equilibrium Green's function(NEGF). Here we compare the HF-GKBA to exact results for a variety of systems with long and short-range interactions, different two-body interaction strengths and various non-equilibrium preparations. We find excellent agreement between the HF-GKBA and exact time evolution in models w… ▽ More The HF-GKBA offers an approximate numerical procedure for propagating the two-time non-equilibrium Green's function(NEGF). Here we compare the HF-GKBA to exact results for a variety of systems with long and short-range interactions, different two-body interaction strengths and various non-equilibrium preparations. We find excellent agreement between the HF-GKBA and exact time evolution in models when more realistic long-range exponentially decaying interactions are considered. This agreement persists for long times and for intermediate to strong interaction strengths. In large systems, HF-GKBA becomes prohibitively expensive for long-time evolutions. For this reason, look at the use of dynamical mode decomposition(DMD) to reconstruct long-time NEGF trajectories from a sample of the initial trajectory. Using no more than 16\% of the total time evolution we reconstruct the total trajectory with high fidelity. Our results show the potential for DMD to be used in conjunction with HF-GKBA to calculate long time trajectories in large-scale systems. △ Less

Submitted 20 January, 2023; v1 submitted 10 November, 2022; originally announced November 2022.

OneProvenance: Efficient Extraction of Dynamic Coarse-Grained Provenance from Database Logs [Technical Report]

Authors: Fotis Psallidas, Ashvin Agrawal, Chandru Sugunan, Khaled Ibrahim, Konstantinos Karanasos, Jesús Camacho-Rodríguez, Avrilia Floratou, Carlo Curino, Raghu Ramakrishnan

Abstract: Provenance encodes information that connects datasets, their generation workflows, and associated metadata (e.g., who or when executed a query). As such, it is instrumental for a wide range of critical governance applications (e.g., observability and auditing). Unfortunately, in the context of database systems, extracting coarse-grained provenance is a long-standing problem due to the complexity a… ▽ More Provenance encodes information that connects datasets, their generation workflows, and associated metadata (e.g., who or when executed a query). As such, it is instrumental for a wide range of critical governance applications (e.g., observability and auditing). Unfortunately, in the context of database systems, extracting coarse-grained provenance is a long-standing problem due to the complexity and sheer volume of database workflows. Provenance extraction from query event logs has been recently proposed as favorable because, in principle, can result in meaningful provenance graphs for provenance applications. Current approaches, however, (a) add substantial overhead to the database and provenance extraction workflows and (b)~extract provenance that is noisy, omits query execution dependencies, and is not rich enough for upstream applications. To address these problems, we introduce OneProvenance: an efficient provenance extraction system from query event logs. OneProvenance addresses the unique challenges of log-based extraction by (a)~identifying query execution dependencies through efficient log analysis, (b) extracting provenance through novel event transformations that account for query dependencies, and (c)~introducing effective filtering optimizations. Our thorough experimental analysis shows that OneProvenance can improve extraction by up to ~18X compared to state-of-the-art baselines; our optimizations reduce the extraction noise and optimize performance even further. OneProvenance is deployed at scale by Microsoft Purview and actively supports customer provenance extraction needs (https://bit.ly/3N2JVGF). △ Less

Submitted 3 March, 2023; v1 submitted 25 October, 2022; originally announced October 2022.

ACM Class: H.2

A Deep-Learning Usability Expansion Model of Ocean Observations

Authors: Ali Muhamed Ali, Hanqi Zhuang, Yu Huang, Ali K. Ibrahim, Ali Salem Altaher, Laurent Chérubin

Abstract: Today's ocean numerical prediction skills depend on the availability of in-situ and remote ocean observations at the time of the predictions only. Because observations are scarce and discontinuous in time and space, numerical models are often unable to accurately model and predict real ocean dynamics, leading to a lack of fulfillment of a range of services that require reliable predictions at vari… ▽ More Today's ocean numerical prediction skills depend on the availability of in-situ and remote ocean observations at the time of the predictions only. Because observations are scarce and discontinuous in time and space, numerical models are often unable to accurately model and predict real ocean dynamics, leading to a lack of fulfillment of a range of services that require reliable predictions at various temporal and spatial scales. The process of constraining free numerical models with observations is known as data assimilation. The primary objective is to minimize the misfit of model states with the observations while respecting the rules of physics. The caveat of this approach is that measurements are used only once, at the time of the prediction. The information contained in the history of the measurements and its role in the determinism of the prediction is, therefore, not accounted for. Consequently, historical measurement cannot be used in real-time forecasting systems. The research presented in this paper provides a novel approach rooted in artificial intelligence to expand the usability of observations made before the time of the prediction. Our approach is based on the re-purpose of an existing deep learning model, called U-Net, designed specifically for image segmentation analysis in the biomedical field. U-Net is used here to create a Transform Model that retains the temporal and spatial evolution of the differences between model and observations to produce a correction in the form of regression weights that evolves spatially and temporally with the model both forward and backward in time, beyond the observation period. Using virtual observations, we show that the usability of the observation can be extended up to a one year prior or post observations. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Comments: 34 pages, 14 figurs, one table

Schrödinger's FP: Dynamic Adaptation of Floating-Point Containers for Deep Learning Training

Authors: Miloš Nikolić, Enrique Torres Sanchez, Jiahui Wang, Ali Hadi Zadeh, Mostafa Mahmoud, Ameer Abdelhadi, Kareem Ibrahim, Andreas Moshovos

Abstract: The transfer of tensors from/to memory during neural network training dominates time and energy. To improve energy efficiency and performance, research has been exploring ways to use narrower data representations. So far, these attempts relied on user-directed trial-and-error to achieve convergence. We present methods that relieve users from this responsibility. Our methods dynamically adjust the… ▽ More The transfer of tensors from/to memory during neural network training dominates time and energy. To improve energy efficiency and performance, research has been exploring ways to use narrower data representations. So far, these attempts relied on user-directed trial-and-error to achieve convergence. We present methods that relieve users from this responsibility. Our methods dynamically adjust the size and format of the floating-point containers used for activations and weights during training, achieving adaptivity across three dimensions: i) which datatype to use, ii) on which tensor, and iii) how it changes over time. The different meanings and distributions of exponent and mantissas lead us to tailored approaches for each. We present two lossy pairs of methods to eliminate as many mantissa and exponent bits as possible without affecting accuracy. Quantum Mantissa and Quantum Exponent are machine learning compression methods that tap into the gradient descent algorithm to learn the minimal mantissa and exponent bitlengths on a per-layer granularity. They automatically learn that many tensors can use just 1 or 2 mantissa bits and 3 or 4 exponent bits. Overall, the two machine learning methods reduce the footprint by $4.74\times$. Alternatively, BitWave observes changes in the loss function during training to adjust mantissa and exponent bitlengths network-wide, yielding a $3.19\times$ reduction in footprint. Finally, we present an optional method, Gecko, to exploit the naturally emerging, lop-sided exponent distribution to losslessly compress resulting exponents from Quantum Exponent or BitWave and, on average, improve compression rates to $5.64\times$ and $4.56\times$. △ Less

Submitted 16 May, 2024; v1 submitted 28 April, 2022; originally announced April 2022.

A Machine Learning Approach to Automatic Classification of Eight Sleep Disorders

Authors: Dylan Zhuang, Ivey Rao, Ali K Ibrahim

Abstract: In this research, we attempt to answer the following basic research questions: Is a machine learning model able to classify all types of sleep disorders with high accuracy? Among the different modalities of sleep disorder signals, are some more important than others? Do raw signals improve the performance of a deep learning model when they are used as inputs? Prior research showed that most sleep… ▽ More In this research, we attempt to answer the following basic research questions: Is a machine learning model able to classify all types of sleep disorders with high accuracy? Among the different modalities of sleep disorder signals, are some more important than others? Do raw signals improve the performance of a deep learning model when they are used as inputs? Prior research showed that most sleep disorders belong to eight categories. To study the performance of machine learning models in classifying polysomnography recordings into the eight categories of sleep pathologies, we selected the Cyclic Alternating Pattern Sleep Database. We developed a multi-channel Deep Learning model where a set of Convolutional Neural Networks were applied to six channels of raw signals of different modalities, including three channels of EEG signals and one channel each of EMG, ECG , and EOG signals. To compare the performance of the DL model with other models, we designed a model that took spectral features, instead of raw signals, as its inputs. We first studied the "importance" issue of signal modalities using the RF algorithm. We found that ECG contributed most to the important features and EMG second, among the four signal modalities. We then studied the accuracy performance of the proposed machine learning models. We verified that the multi-channel DL-R model, which took raw signals as its inputs, outperformed all other models, with its sensitivity and specificity scores both being above 95 %. This accuracy performance is on a par with those published results which dealt with fewer types of sleep disorders. We adopted two popular heatmap-generating techniques, with which we confirmed that the DL model's superior performance was owing to the CNN network's ability to extract potent features from raw signals. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Gender Imbalance and Spatiotemporal Patterns of Contributions to Citizen Science Projects: the case of Zooniverse

Authors: Khairunnisa Ibrahim, Samuel Khodursky, Taha Yasseri

Abstract: Citizen Science is research undertaken by professional scientists and members of the public collaboratively. Despite numerous benefits of citizen science for both the advancement of science and the community of the citizen scientists, there is still no comprehensive knowledge of patterns of contributions, and the demography of contributors to citizen science projects. In this paper we provide a fi… ▽ More Citizen Science is research undertaken by professional scientists and members of the public collaboratively. Despite numerous benefits of citizen science for both the advancement of science and the community of the citizen scientists, there is still no comprehensive knowledge of patterns of contributions, and the demography of contributors to citizen science projects. In this paper we provide a first overview of spatiotemporal and gender distribution of citizen science workforce by analyzing 54 million classifications contributed by more than 340 thousand citizen science volunteers from 198 countries to one of the largest citizen science platforms, Zooniverse. First we report on the uneven geographical distribution of the citizen scientist and model the variations among countries based on the socio-economic conditions as well as the level of research investment in each country. Analyzing the temporal features of contributions, we report on high "burstiness" of participation instances as well as the leisurely nature of participation suggested by the time of the day that the citizen scientists were the most active. Finally, we discuss the gender imbalance among citizen scientists (about 30% female) and compare it with other collaborative projects as well as the gender distribution in more formal scientific activities. Citizen science projects need further attention from outside of the academic community, and our findings can help attract the attention of public and private stakeholders, as well as to inform the design of the platforms and science policy making processes. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: Under Review

Journal ref: Front. Phys. 9:650720 (2021)

Enhancing Scalability of a Matrix-Free Eigensolver for Studying Many-Body Localization

Authors: Roel Van Beeumen, Khaled Z. Ibrahim, Gregory D. Kahanamoku-Meyer, Norman Y. Yao, Chao Yang

Abstract: In [Van Beeumen, et. al, HPC Asia 2020, https://www.doi.org/10.1145/3368474.3368497] a scalable and matrix-free eigensolver was proposed for studying the many-body localization (MBL) transition of two-level quantum spin chain models with nearest-neighbor $XX+YY$ interactions plus $Z$ terms. This type of problem is computationally challenging because the vector space dimension grows exponentially w… ▽ More In [Van Beeumen, et. al, HPC Asia 2020, https://www.doi.org/10.1145/3368474.3368497] a scalable and matrix-free eigensolver was proposed for studying the many-body localization (MBL) transition of two-level quantum spin chain models with nearest-neighbor $XX+YY$ interactions plus $Z$ terms. This type of problem is computationally challenging because the vector space dimension grows exponentially with the physical system size, and averaging over different configurations of the random disorder is needed to obtain relevant statistical behavior. For each eigenvalue problem, eigenvalues from different regions of the spectrum and their corresponding eigenvectors need to be computed. Traditionally, the interior eigenstates for a single eigenvalue problem are computed via the shift-and-invert Lanczos algorithm. Due to the extremely high memory footprint of the LU factorizations, this technique is not well suited for large number of spins $L$, e.g., one needs thousands of compute nodes on modern high performance computing infrastructures to go beyond $L = 24$. The matrix-free approach does not suffer from this memory bottleneck, however, its scalability is limited by a computation and communication imbalance. We present a few strategies to reduce this imbalance and to significantly enhance the scalability of the matrix-free eigensolver. To optimize the communication performance, we leverage the consistent space runtime, CSPACER, and show its efficiency in accelerating the MBL irregular communication patterns at scale compared to optimized MPI non-blocking two-sided and one-sided RMA implementation variants. The efficiency and effectiveness of the proposed algorithm is demonstrated by computing eigenstates on a massively parallel many-core high performance computer. △ Less

Submitted 30 November, 2020; originally announced December 2020.

North Atlantic Right Whales Up-call Detection Using Multimodel Deep Learning

Authors: Ali K Ibrahim, Hanqi Zhuang, Laurent M. Ch'erubin, Nurgun Erdol, Gregory O Corry-Crowe, Ali Muhamed Ali

Abstract: A new method for North Atlantic Right Whales (NARW) up-call detection using Multimodel Deep Learning (MMDL) is presented in this paper. In this approach, signals from passive acoustic sensors are first converted to spectrogram and scalogram images, which are time-frequency representations of the signals. These images are in turn used to train an MMDL detec-tor, consisting of Convolutional Neural N… ▽ More A new method for North Atlantic Right Whales (NARW) up-call detection using Multimodel Deep Learning (MMDL) is presented in this paper. In this approach, signals from passive acoustic sensors are first converted to spectrogram and scalogram images, which are time-frequency representations of the signals. These images are in turn used to train an MMDL detec-tor, consisting of Convolutional Neural Networks (CNNs) and Stacked Auto Encoders (SAEs). Our experimental studies revealed that CNNs work better with spectrograms and SAEs with sca-lograms. Therefore in our experimental design, the CNNs are trained by using spectrogram im-ages, and the SAEs are trained by using scalogram images. A fusion mechanism is used to fuse the results from individual neural networks. In this paper, the results obtained from the MMDL detector are compared with those obtained from conventional machine learning algorithms trained with handcraft features. It is shown that the performance of the MMDL detector is sig-nificantly better than those of the representative conventional machine learning methods in terms of up-call detection rate, non-up-call detection rate, and false alarm rate. △ Less

Submitted 17 May, 2020; originally announced May 2020.

Spontaneous Formation of a Superconductor-Topological Insulator-Normal Metal Layered Heterostructure

Authors: Yu-Qi Wang, Xu Wu, Ye-Liang Wang, Yan Shao, Tao Lei, Jia-Ou Wang, Shi-Yu Zhu, Haiming Guo, Ling-Xiao Zhao, Gen-Fu Chen, Simin Nie, Hong-Ming Weng, Kurash Ibrahim, Xi Dai, Zhong Fang, Hong-Jun Gao

Abstract: The discovery of graphene has spurred vigorous investigation of 2D materials, revealing a wide range of extraordinary properties and functionalities. 2D heterostructural materials have recently been fabricated by assembling isolated planes layer-by-layer in a desired sequence. Unusual properties and novel physical phenomena have been unveiled in such layered heterostructures. For example, Hofstadt… ▽ More The discovery of graphene has spurred vigorous investigation of 2D materials, revealing a wide range of extraordinary properties and functionalities. 2D heterostructural materials have recently been fabricated by assembling isolated planes layer-by-layer in a desired sequence. Unusual properties and novel physical phenomena have been unveiled in such layered heterostructures. For example, Hofstadter's butterfly, an intriguing pattern of the energy states of Bloch electrons, was predicted several decades ago to be observable only under unfeasibly strong magnetic fields in conventional materials. But it has been observed recently under current experimental conditions in graphene/BN layered heterostructures, one of the outstanding new kinds of 2D materials. Moreover, another amazing physics phenomenon, Majorana fermions was predicted to exist in heterostructural systems consisting of a superconductor (SC) and a topological insulator (TI) Journal. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Journal ref: Adv. Mater. 28, (2016), 5013

Intrinsically patterned two-dimensional materials for selective adsorption of molecules and nanoclusters

Authors: X Lin, JC Lu, Y Shao, YY Zhang, X Wu, JB Pan, L Gao, SY Zhu, K Qian, YF Zhang, DL Bao, LF Li, YQ Wang, ZL Liu, JT Sun, T Lei, C Liu, JO Wang, K Ibrahim, DN Leonard, W Zhou, HM Guo, YL Wang, SX Du, ST Pantelides , et al. (1 additional authors not shown)

Abstract: Two-dimensional (2D) materials have been studied extensively as monolayers 1-5, vertical or lateral heterostructures 6-8. To achieve functionalization, monolayers are often patterned using soft lithography and selectively decorated with molecules 9,10. Here we demonstrate the growth of a family of 2D materials that are intrinsically patterned. We demonstrate that a monolayer of PtSe2 can be grown… ▽ More Two-dimensional (2D) materials have been studied extensively as monolayers 1-5, vertical or lateral heterostructures 6-8. To achieve functionalization, monolayers are often patterned using soft lithography and selectively decorated with molecules 9,10. Here we demonstrate the growth of a family of 2D materials that are intrinsically patterned. We demonstrate that a monolayer of PtSe2 can be grown on a Pt substrate in the form of a triangular pattern of alternating 1T and 1H phases. Moreover, we show that, in a monolayer of CuSe grown on a Cu substrate, strain relaxation leads to periodic patterns of triangular nanopores with uniform size. Adsorption of different species at preferred pattern sites is also achieved, demonstrating that these materials can serve as templates for selective self-assembly of molecules or nanoclusters, as well as for the functionalization of the same substrate with two different species. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Journal ref: Nature Materials, 16, 717-721 (2017)

ContamiNet: Detecting Contamination in Municipal Solid Waste

Authors: Khoury Ibrahim, Danielle A. Savage, Addie Schnirel, Paul Intrevado, Yannet Interian

Abstract: Leveraging over 30,000 images each with up to 89 labels collected by Recology---an integrated resource recovery company with both residential and commercial trash, recycling and composting services---the authors develop ContamiNet, a convolutional neural network, to identify contaminating material in residential recycling and compost bins. When training the model on a subset of labels that meet a… ▽ More Leveraging over 30,000 images each with up to 89 labels collected by Recology---an integrated resource recovery company with both residential and commercial trash, recycling and composting services---the authors develop ContamiNet, a convolutional neural network, to identify contaminating material in residential recycling and compost bins. When training the model on a subset of labels that meet a minimum frequency threshold, ContamiNet preforms almost as well human experts in detecting contamination (0.86 versus 0.88 AUC). Recology is actively piloting ContamiNet in their daily municipal solid waste (MSW) collection to identify contaminants in recycling and compost bins to subsequently inform and educate customers about best sorting practices. △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: 8 pages, 3 figures, ICMLA 2020

Monte Carlo simulations of a disordered superconductor-metal quantum phase transition

Authors: Ahmed K. Ibrahim, Thomas Vojta

Abstract: We investigate the quantum phase transitions of a disordered nanowire from superconducting to metallic behavior by employing extensive Monte Carlo simulations. To this end, we map the quantum action onto a (1+1)-dimensional classical XY model with long-range interactions in imaginary time. We then analyze the finite-size scaling behavior of the order parameter susceptibility, the correlation time,… ▽ More We investigate the quantum phase transitions of a disordered nanowire from superconducting to metallic behavior by employing extensive Monte Carlo simulations. To this end, we map the quantum action onto a (1+1)-dimensional classical XY model with long-range interactions in imaginary time. We then analyze the finite-size scaling behavior of the order parameter susceptibility, the correlation time, the superfluid density, and the compressibility. We find strong numerical evidence for the critical behavior to be of infinite-randomness type and to belong to the random transverse-field Ising universality class, as predicted by a recent strong disorder renormalization group calculation. △ Less

Submitted 29 December, 2018; v1 submitted 31 July, 2018; originally announced August 2018.

Comments: 9 pages, 9 figures included, final version as published

Journal ref: Eur. Phys. J. B 91, 311 (2018)

Monte Carlo simulations of the disordered three-color quantum Ashkin-Teller chain

Authors: Ahmed K. Ibrahim, Thomas Vojta

Abstract: We investigate the zero-temperature quantum phase transitions of the disordered three-color quantum Ashkin-Teller spin chain by means of large-scale Monte Carlo simulations. We find that the first-order phase transitions of the clean system are rounded by the quenched disorder. For weak inter-color coupling, the resulting emergent quantum critical point between the paramagnetic phase and the magne… ▽ More We investigate the zero-temperature quantum phase transitions of the disordered three-color quantum Ashkin-Teller spin chain by means of large-scale Monte Carlo simulations. We find that the first-order phase transitions of the clean system are rounded by the quenched disorder. For weak inter-color coupling, the resulting emergent quantum critical point between the paramagnetic phase and the magnetically ordered Baxter phase is of infinite-randomness type and belongs to the universality class of the random transverse-field Ising model, as predicted by recent strong-disorder renormalization group calculations. We also find evidence for unconventional critical behavior in the case of strong inter-color coupling, even though an unequivocal determination of the universality class is beyond our numerical capabilities. We compare our results to earlier simulations, and we discuss implications for the classification of phase transitions in the presence of disorder. △ Less

Submitted 16 December, 2016; originally announced December 2016.

Comments: 9 pages, 9 eps figures included

Journal ref: Phys. Rev. B 95, 054403 (2017)

Emerging critical behavior at a first-order phase transition rounded by disorder

Authors: Ahmed K. Ibrahim, Thomas Vojta

Abstract: We investigate the two-dimensional four-color Ashkin-Teller model by means of large-scale Monte-Carlo simulations. We demonstrate that the first-order phase transition of the clean system is destroyed by random disorder introduced via site dilution. The critical behavior of the emerging continuous transition belongs to the clean two-dimensional Ising universality class, apart from logarithmic corr… ▽ More We investigate the two-dimensional four-color Ashkin-Teller model by means of large-scale Monte-Carlo simulations. We demonstrate that the first-order phase transition of the clean system is destroyed by random disorder introduced via site dilution. The critical behavior of the emerging continuous transition belongs to the clean two-dimensional Ising universality class, apart from logarithmic corrections. These results confirm perturbative renormalization-group predictions; they also agree with recent findings for the three-color case, indicating that the critical behavior is universal. △ Less

Submitted 16 June, 2017; v1 submitted 14 February, 2016; originally announced February 2016.

Comments: 6 pages, 5 eps figures included, builds on arXiv:1504.00408, final version as published

Journal ref: Fortschr. Phys. 65, No. 6-8, 1600018 (2017)

In situ resonant photoemission and X-ray absorption study of the BiFeO3 thin film

Authors: Abduleziz Ablat, Mamatrishat Mamat, Yasin Ghupur, Rong Wu, Emin Muhemmed, Jiaou Wang, Haijie Qian, Rui Wu, Kurash Ibrahim

Abstract: Multiferroic bismuth ferrite (BiFeO3) thin films were prepared by pulsed laser deposition (PLD) technique. Electronic structures of the film have been studied by in situ photoemission spectroscopy (PES) and x-ray absorption spectroscopy (XAS). Both the Fe 2p PES and XAS spectra show that Fe ion is formally in +3 valence state. The Fe 2p and O K edge XAS spectra indicate that the oxygen octahedral… ▽ More Multiferroic bismuth ferrite (BiFeO3) thin films were prepared by pulsed laser deposition (PLD) technique. Electronic structures of the film have been studied by in situ photoemission spectroscopy (PES) and x-ray absorption spectroscopy (XAS). Both the Fe 2p PES and XAS spectra show that Fe ion is formally in +3 valence state. The Fe 2p and O K edge XAS spectra indicate that the oxygen octahedral crystal ligand field splits the unoccupied Fe 3d state to t2g and eg states. Valence band Fe 2p-3d resonant photoemission results indicate that hybridization between Fe 3d and O 2p plays important role in the multiferroic BiFeO3 thin films. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Comments: 23 pages, 6 figures

Modern Gyrokinetic Particle-In-Cell Simulation of Fusion Plasmas on Top Supercomputers

Authors: Bei Wang, Stephane Ethier, William Tang, Khaled Ibrahim, Kamesh Madduri, Samuel Williams, Leonid Oliker

Abstract: The Gyrokinetic Toroidal Code at Princeton (GTC-P) is a highly scalable and portable particle-in-cell (PIC) code. It solves the 5D Vlasov-Poisson equation featuring efficient utilization of modern parallel computer architectures at the petascale and beyond. Motivated by the goal of develo** a modern code capable of dealing with the physics challenge of increasing problem size with sufficient res… ▽ More The Gyrokinetic Toroidal Code at Princeton (GTC-P) is a highly scalable and portable particle-in-cell (PIC) code. It solves the 5D Vlasov-Poisson equation featuring efficient utilization of modern parallel computer architectures at the petascale and beyond. Motivated by the goal of develo** a modern code capable of dealing with the physics challenge of increasing problem size with sufficient resolution, new thread-level optimizations have been introduced as well as a key additional domain decomposition. GTC-P's multiple levels of parallelism, including inter-node 2D domain decomposition and particle decomposition, as well as intra-node shared memory partition and vectorization have enabled pushing the scalability of the PIC method to extreme computational scales. In this paper, we describe the methods developed to build a highly parallelized PIC code across a broad range of supercomputer designs. This particularly includes implementations on heterogeneous systems using NVIDIA GPU accelerators and Intel Xeon Phi (MIC) co-processors and performance comparisons with state-of-the-art homogeneous HPC systems such as Blue Gene/Q. New discovery science capabilities in the magnetic fusion energy application domain are enabled, including investigations of Ion-Temperature-Gradient (ITG) driven turbulence simulations with unprecedented spatial resolution and long temporal duration. Performance studies with realistic fusion experimental parameters are carried out on multiple supercomputing systems spanning a wide range of cache capacities, cache-sharing configurations, memory bandwidth, interconnects and network topologies. These performance comparisons using a realistic discovery-science-capable domain application code provide valuable insights on optimization techniques across one of the broadest sets of current high-end computing platforms worldwide. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Comments: submitted to International Journal of High Performance Computing Applications

An efficient basis set representation for calculating electrons in molecules

Authors: Jeremiah R. Jones, Francois-Henry Rouet, Keith V. Lawler, Eugene Vecharynski, Khaled Z. Ibrahim, Samuel Williams, Brant Abeln, Chao Yang, Daniel J. Haxton, C. William McCurdy, Xiaoye S. Li, Thomas N. Rescigno

Abstract: The method of McCurdy, Baertschy, and Rescigno, J. Phys. B, 37, R137 (2004) is generalized to obtain a straightforward, surprisingly accurate, and scalable numerical representation for calculating the electronic wave functions of molecules. It uses a basis set of product sinc functions arrayed on a Cartesian grid, and yields 1 kcal/mol precision for valence transition energies with a grid resoluti… ▽ More The method of McCurdy, Baertschy, and Rescigno, J. Phys. B, 37, R137 (2004) is generalized to obtain a straightforward, surprisingly accurate, and scalable numerical representation for calculating the electronic wave functions of molecules. It uses a basis set of product sinc functions arrayed on a Cartesian grid, and yields 1 kcal/mol precision for valence transition energies with a grid resolution of approximately 0.1 bohr. The Coulomb matrix elements are replaced with matrix elements obtained from the kinetic energy operator. A resolution-of-the-identity approximation renders the primitive one- and two-electron matrix elements diagonal; in other words, the Coulomb operator is local with respect to the grid indices. The calculation of contracted two-electron matrix elements among orbitals requires only O(N log(N)) multiplication operations, not O(N^4), where N is the number of basis functions; N = n^3 on cubic grids. The representation not only is numerically expedient, but also produces energies and properties superior to those calculated variationally. Absolute energies, absorption cross sections, transition energies, and ionization potentials are reported for one- (He^+, H_2^+ ), two- (H_2, He), ten- (CH_4) and 56-electron (C_8H_8) systems. △ Less

Submitted 22 January, 2016; v1 submitted 13 July, 2015; originally announced July 2015.

Comments: Submitted to JCP

Graceful Exit Inflation in $f(T)$ Gravity

Authors: G. G. L. Nashed, W. El Hanafy, Sh. Kh. Ibrahim

Abstract: We apply a quadratic teleparallel torsion scalar of the $f(T)=T+αT^{2}$ field equations to the spatially flat Friedmann-Robertson-Walker (FRW) model. We assume two perfect fluid components, the matter component has a fixed equation of state (EoS) parameter $ω$, while the torsion component has a dynamical EoS. We obtain an effective scale factor allowing a graceful exit inflation model with no need… ▽ More We apply a quadratic teleparallel torsion scalar of the $f(T)=T+αT^{2}$ field equations to the spatially flat Friedmann-Robertson-Walker (FRW) model. We assume two perfect fluid components, the matter component has a fixed equation of state (EoS) parameter $ω$, while the torsion component has a dynamical EoS. We obtain an effective scale factor allowing a graceful exit inflation model with no need to slow roll technique. We perform a standard cosmological study to examine the cosmic evolution. In addition, the effective EoS shows consistent results confirming a smooth phase transition from inflation to radiation dominant universe. We consider the case when the torsion is made of a scalar field. This treatment enables us to induce a scalar field sensitive to the spacetime symmetry with an effective potential constructed from the quadratic $f(T)$ gravity. The model is parameterized by two parameters ($α,ω$) both derive the universe to exit out of de Sitter expansion. The first is purely gravitational and works effectively at large Hubble regime of the early stage allowing a slow roll potential. The second parameter $ω$ is a thermal-like correction coupled to the kinetic term and works effectively at low Hubble regime of late stages. The slow roll analysis of the obtained potential can perform tensor-to-scalar ratio and spectral index parameters consistent with the recent Planck and BICEP2 data. Both cosmological and scalar field analyses show consistent results. △ Less

Submitted 4 April, 2015; v1 submitted 9 November, 2014; originally announced November 2014.

Comments: 22 pages, 6 Figures and 1 Table. Section 7 has been added. The list of references has been updated

Enhanced rare region effects in the contact process with long-range correlated disorder

Authors: Ahmed K. Ibrahim, Hatem Barghathi, Thomas Vojta

Abstract: We investigate the nonequilibrium phase transition in the disordered contact process in the presence of long-range spatial disorder correlations. These correlations greatly increase the probability for finding rare regions that are locally in the active phase while the bulk system is still in the inactive phase. Specifically, if the correlations decay as a power of the distance, the rare region pr… ▽ More We investigate the nonequilibrium phase transition in the disordered contact process in the presence of long-range spatial disorder correlations. These correlations greatly increase the probability for finding rare regions that are locally in the active phase while the bulk system is still in the inactive phase. Specifically, if the correlations decay as a power of the distance, the rare region probability is a stretched exponential of the rare region size rather than a simple exponential as is the case for uncorrelated disorder. As a result, the Griffiths singularities are enhanced and take a non-power-law form. The critical point itself is of infinite-randomness type but with critical exponent values that differ from the uncorrelated case. We report large-scale Monte-Carlo simulations that verify and illustrate our theory. We also discuss generalizations to higher dimensions and applications to other systems such as the random transverse-field Ising model, itinerant magnets and the superconductor-metal transition. △ Less

Submitted 18 July, 2014; originally announced July 2014.

Comments: 11 pages, 8 eps figures included

Journal ref: Phys. Rev. E 90, 042132 (2014)

License Plate Recognition (LPR): A Review with Experiments for Malaysia Case Study

Authors: Nuzulha Khilwani Ibrahim, Emaliana Kasmuri, Norazira A Jalil, Mohd Adili Norasikin, Sazilah Salam, Mohamad Riduwan Md Nawawi

Abstract: Most vehicle license plate recognition use neural network techniques to enhance its computing capability. The image of the vehicle license plate is captured and processed to produce a textual output for further processing. This paper reviews image processing and neural network techniques applied at different stages which are preprocessing, filtering, feature extraction, segmentation and recognitio… ▽ More Most vehicle license plate recognition use neural network techniques to enhance its computing capability. The image of the vehicle license plate is captured and processed to produce a textual output for further processing. This paper reviews image processing and neural network techniques applied at different stages which are preprocessing, filtering, feature extraction, segmentation and recognition in such way to remove the noise of the image, to enhance the image quality and to expedite the computing process by converting the characters in the image into respective text. An exemplar experiment has been done in MATLAB to show the basic process of the image processing especially for license plate in Malaysia case study. An algorithm is adapted into the solution for parking management system. The solution then is implemented as proof of concept to the algorithm. △ Less

Submitted 22 January, 2014; originally announced January 2014.

On certain hypergeometric identities deducible by using beta integral method

Authors: Adel K. Ibrahim, Medhat A. Rakha, Arjun K. Rathie

Abstract: The aim of this research paper is to demonstrate how one can obtain eleven new and interesting hypergeometric identities (in the form of a single result) from the old ones by mainly applying the well known beta integral method which was used successfully and systematically by Krattenthaler and Rao in their well known, very interesting research papers. The results are derived with the help of gener… ▽ More The aim of this research paper is to demonstrate how one can obtain eleven new and interesting hypergeometric identities (in the form of a single result) from the old ones by mainly applying the well known beta integral method which was used successfully and systematically by Krattenthaler and Rao in their well known, very interesting research papers. The results are derived with the help of generalization of a quadratic transformation formula due to Kummer very recently obtained by Kim, et al. . Several identities including one obtained earlier by Krattenthaler and Rao follow special cases of our main findings. The results established in this paper are simple, interesting, easily established and may be potentially useful. △ Less

Submitted 14 August, 2013; originally announced August 2013.

Comments: 8 pages

MSC Class: 33C05; 33C20; 33C70

Remark On Two Results due to Ramanujan on Hypergeometric Series

Authors: Medhat A. Rakha, Adel K. Ibrahim, Arjun K. Rathie

Abstract: During the course of verifying the results of Ramanujan on hypergeometric series, Berndt in his notebooks, Part II mentioned corrected forms of two of the Ramanujan's results. The aim of this short research note is to point out that one of the results obtained by Ramanujan is correct (and not of Berndt's result) and the second result (which is slightly differ from Ramanujan's result and Berndt's… ▽ More During the course of verifying the results of Ramanujan on hypergeometric series, Berndt in his notebooks, Part II mentioned corrected forms of two of the Ramanujan's results. The aim of this short research note is to point out that one of the results obtained by Ramanujan is correct (and not of Berndt's result) and the second result (which is slightly differ from Ramanujan's result and Berndt's result) is given here in corrected form. △ Less

Submitted 20 February, 2013; originally announced February 2013.

A Search for Exozodiacal Clouds with Kepler

Authors: Christopher C. Stark, Alan P. Boss, Alycia J. Weinberger, Brian K. Jackson, Michael Endl, William D. Cochran, Marshall Johnson, Caroline Caldwell, Eric Agol, Eric B. Ford, Jennifer R. Hall, Khadeejah A. Ibrahim, Jie Li

Abstract: Planets embedded within dust disks may drive the formation of large scale clumpy dust structures by trap** dust into resonant orbits. Detection and subsequent modeling of the dust structures would help constrain the mass and orbit of the planet and the disk architecture, give clues to the history of the planetary system, and provide a statistical estimate of disk asymmetry for future exoEarth-im… ▽ More Planets embedded within dust disks may drive the formation of large scale clumpy dust structures by trap** dust into resonant orbits. Detection and subsequent modeling of the dust structures would help constrain the mass and orbit of the planet and the disk architecture, give clues to the history of the planetary system, and provide a statistical estimate of disk asymmetry for future exoEarth-imaging missions. Here we present the first search for these resonant structures in the inner regions of planetary systems by analyzing the light curves of hot Jupiter planetary candidates identified by the Kepler mission. We detect only one candidate disk structure associated with KOI 838.01 at the 3-sigma confidence level, but subsequent radial velocity measurements reveal that KOI 838.01 is a grazing eclipsing binary and the candidate disk structure is a false positive. Using our null result, we place an upper limit on the frequency of dense exozodi structures created by hot Jupiters. We find that at the 90% confidence level, less than 21% of Kepler hot Jupiters create resonant dust clumps that lead and trail the planet by ~90 degrees with optical depths >~5*10^-6, which corresponds to the resonant structure expected for a lone hot Jupiter perturbing a dynamically cold dust disk 50 times as dense as the zodiacal cloud. △ Less

Submitted 25 January, 2013; originally announced January 2013.

Comments: 22 pages, 6 figures, Accepted for publication in ApJ

Detection of Potential Transit Signals in the First Twelve Quarters of Kepler Mission Data

Authors: Peter Tenenbaum, Jon M. Jenkins, Shawn Seader, Christopher J. Burke, Jessie L. Christiansen, Jason F. Rowe, Douglas A. Caldwell, Bruce D. Clarke, Jie Li, Elisa V. Quintana, Jeffrey C. Smith, Susan E. Thompson, Joseph D. Twicken, William J. Borucki, Natalie M. Batalha, Miles T. Cote, Michael R. Haas, Dwight T. Sanderfer, Forrest R. Girouard, Jennifer R. Hall, Khadeejah Ibrahim, Todd C. Klaus, Sean D. McCauliff, Christopher K. Middour, Anima Sabale , et al. (4 additional authors not shown)

Abstract: We present the results of a search for potential transit signals in the first three years of photometry data acquired by the Kepler Mission. The targets of the search include 112,321 targets which were observed over the full interval and an additional 79,992 targets which were observed for a subset of the full interval. From this set of targets we find a total of 11,087 targets which contain at le… ▽ More We present the results of a search for potential transit signals in the first three years of photometry data acquired by the Kepler Mission. The targets of the search include 112,321 targets which were observed over the full interval and an additional 79,992 targets which were observed for a subset of the full interval. From this set of targets we find a total of 11,087 targets which contain at least one signal which meets the Kepler detection criteria: those criteria are periodicity of the signal, an acceptable signal-to-noise ratio, and three tests which reject false positives. Each target containing at least one detected signal is then searched repeatedly for additional signals, which represent multi-planet systems of transiting planets. When targets with multiple detections are considered, a total of 18,406 potential transiting planet signals are found in the Kepler Mission dataset. The detected signals are dominated by events with relatively low signal-to-noise ratios and by events with relatively short periods. The distribution of estimated transit depths appears to peak in the range between 20 and 30 parts per million, with a few detections down to fewer than 10 parts per million. The detections exhibit signal-to-noise ratios from 7.1 sigma, which is the lower cut-off for detections, to over 10,000 sigma, and periods ranging from 0.5 days, which is the shortest period searched, to 525 days, which is the upper limit of achievable periods given the length of the data set and the requirement that all detections include at least 3 transits. The detected signals are compared to a set of known transit events in the Kepler field of view, many of which were identified by alternative methods; the comparison shows that the current search recovery rate for targets with known transit events is 98.3%. △ Less

Submitted 9 April, 2013; v1 submitted 12 December, 2012; originally announced December 2012.

Comments: 29 pages, 14 figures, accepted for publication in ApJ Supp

Relationship between low and high frequencies in Delta Scuti stars: Photometric Kepler and spectroscopic analyses of the rapid rotator KIC 8054146

Authors: M. Breger, L. Fossati, L. Balona, D. W. Kurtz, P. Robertson, D. Bohlender, P. Lenz, I. Mueller, Th. Lueftinger, Bruce D. Clarke, Jennifer R. Hall, Khadeejah A. Ibrahim

Abstract: Two years of Kepler data of KIC 8054146 (delta Sct/gamma Dor hybrid) revealed 349 statistically significant frequencies between 0.54 and 191.36 c/d (6.3 microHz to 2.21 mHz). The 117 low frequencies cluster in specific frequency bands, but do not show the equidistant period spacings predicted for gravity modes of successive radial order, n, and reported for at least one other hybrid pulsator. The… ▽ More Two years of Kepler data of KIC 8054146 (delta Sct/gamma Dor hybrid) revealed 349 statistically significant frequencies between 0.54 and 191.36 c/d (6.3 microHz to 2.21 mHz). The 117 low frequencies cluster in specific frequency bands, but do not show the equidistant period spacings predicted for gravity modes of successive radial order, n, and reported for at least one other hybrid pulsator. The four dominant low frequencies in the 2.8 to 3.0 c/d (32 to 35 microHz) range show strong amplitude variability with timescales of months and years. These four low frequencies also determine the spacing of the higher frequencies in and beyond the delta Sct pressure-mode frequency domain. In fact, most of the higher frequencies belong to one of three families with spacings linked to a specific dominant low frequency. In the Fourier spectrum, these family regularities show up as triplets, high-frequency sequences with absolutely equidistant frequency spacings, side lobes (amplitude modulations) and other regularities in frequency spacings. Furthermore, within two families the amplitude variations between the low and high frequencies are related. We conclude that the low frequencies (gravity modes, rotation) and observed high frequencies (mostly pressure modes) are physically connected. This unusual behavior may be related to the very rapid rotation of the star: from a combination of high and low-resolution spectroscopy we determined that KIC 8054146 is a very fast rotator (v sin i = 300 +/- 20 km/s) with an effective temperature of 7600 +/- 200 K and a surface gravity log g of 3.9 +/- 0.3. Several astrophysical ideas explaining the origin of the relationship between the low and high frequencies are explored. △ Less

Submitted 21 September, 2012; originally announced September 2012.

Comments: to be published in "The Astrophysical Journal", November 1

The Neptune-Sized Circumbinary Planet Kepler-38b

Authors: Jerome A. Orosz, William F. Welsh, Joshua A. Carter, Erik Brugamyer, Lars A. Buchhave, William D. Cochran, Michael Endl, Eric B. Ford, Phillip MacQueen, Donald R. Short, Guillermo Torres, Gur Windmiller, Eric Agol, Thomas Barclay, Douglas A. Caldwell, Bruce D. Clarke, Laurance R. Doyle, Daniel C. Fabrycky, John C. Geary, Nader Haghighipour, Matthew J. Holman, Khadeejah A. Ibrahim, Jon M. Jenkins, Karen Kinemuchi, Jie Li , et al. (6 additional authors not shown)

Abstract: We discuss the discovery and characterization of the circumbinary planet Kepler-38b. The stellar binary is single-lined, with a period of 18.8 days, and consists of a moderately evolved main-sequence star (M_A = 0.949 +/- 0.059 solar masses and R_A = 1.757 +/- 0.034 solar radii) paired with a low-mass star (M_B = 0.249 +/- 0.010 solar masses and R_B = 0.2724 +/- 0.0053 solar radii) in a mildly ecc… ▽ More We discuss the discovery and characterization of the circumbinary planet Kepler-38b. The stellar binary is single-lined, with a period of 18.8 days, and consists of a moderately evolved main-sequence star (M_A = 0.949 +/- 0.059 solar masses and R_A = 1.757 +/- 0.034 solar radii) paired with a low-mass star (M_B = 0.249 +/- 0.010 solar masses and R_B = 0.2724 +/- 0.0053 solar radii) in a mildly eccentric (e=0.103) orbit. A total of eight transits due to a circumbinary planet crossing the primary star were identified in the Kepler light curve (using Kepler Quarters 1 through 11), from which a planetary period of 105.595 +/- 0.053 days can be established. A photometric dynamical model fit to the radial velocity curve and Kepler light curve yields a planetary radius of 4.35 +/- 0.11 Earth radii, or 1.12 +/- 0.03 Neptune radii. Since the planet is not sufficiently massive to observably alter the orbit of the binary from Keplerian motion, we can only place an upper limit on the mass of the planet of 122 Earth masses (7.11 Neptune masses or 0.384 Jupiter masses) at 95% confidence. This upper limit should decrease as more Kepler data become available. △ Less

Submitted 17 August, 2012; originally announced August 2012.

Comments: 32 pages, 9 figures, accepted to ApJ. The figures have been compressed

Solar-like oscillations in red giants observed with \textit{Kepler}: influence of increased timespan on global oscillation parameters

Authors: S. Hekker, Y. Elsworth, B. Mosser, T. Kallinger, W. J. Chaplin, J. De Ridder, R. A. Garcia, D. Stello, B. D. Clarke, J. R. Hall, K. A. Ibrahim

Abstract: The length of the asteroseismic timeseries obtained from the Kepler satellite analysed here span 19 months. Kepler provides the longest continuous timeseries currently available, which calls for a study of the influence of the increased timespan on the accuracy and precision of the obtained results. We find that in general a minimum of the order of 400 day long timeseries are necessary to obtain r… ▽ More The length of the asteroseismic timeseries obtained from the Kepler satellite analysed here span 19 months. Kepler provides the longest continuous timeseries currently available, which calls for a study of the influence of the increased timespan on the accuracy and precision of the obtained results. We find that in general a minimum of the order of 400 day long timeseries are necessary to obtain reliable results for the global oscillation parameters in more than 95% of the stars, but this does depend on <dnu>. In a statistical sense the quoted uncertainties seem to provide a reasonable indication of the precision of the obtained results in short (50-day) runs, they do however seem to be overestimated for results of longer runs. Furthermore, the different definitions of the global parameters used in the different methods have non-negligible effects on the obtained values. Additionally, we show that there is a correlation between nu_max and the flux variance. We conclude that longer timeseries improve the likelihood to detect oscillations with automated codes (from ~60% in 50 day runs to > 95% in 400 day runs with a slight method dependence) and the precision of the obtained global oscillation parameters. The trends suggest that the improvement will continue for even longer timeseries than the 600 days considered here, with a reduction in the median absolute deviation of more than a factor of 10 for an increase in timespan from 50 to 2000 days (the currently foreseen length of the mission). This work shows that global parameters determined with high precision - thus from long datasets - using different definitions can be used to identify the evolutionary state of the stars. (abstract truncated) △ Less

Submitted 3 July, 2012; originally announced July 2012.

Comments: 11 pages, 8 figures, accepted for publication by Astronomy and Astrophysics

Asteroseismology of the open clusters NGC 6791, NGC 6811, and NGC 6819 from nineteen months of Kepler photometry

Authors: Enrico Corsaro, Dennis Stello, Daniel Huber, Timothy R. Bedding, Alfio Bonanno, Karsten Brogaard, Thomas Kallinger, Othman Benomar, Timothy R. White, Benoit Mosser, Sarbani Basu, William J. Chaplin, Jørgen Christensen-Dalsgaard, Yvonne P. Elsworth, Rafael A. García, Saskia Hekker, Hans Kjeldsen, Savita Mathur, Søren Meibom, Jennifer R. Hall, Khadeejah A. Ibrahim, Todd C. Klaus

Abstract: We studied solar-like oscillations in 115 red giants in the three open clusters NGC 6791, NGC 6811, and NGC 6819, based on photometric data covering more than 19 months with NASA's Kepler space telescope. We present the asteroseismic diagrams of the asymptotic parameters δν_02, δν_01 and ε, which show clear correlation with fundamental stellar parameters such as mass and radius. When the stellar p… ▽ More We studied solar-like oscillations in 115 red giants in the three open clusters NGC 6791, NGC 6811, and NGC 6819, based on photometric data covering more than 19 months with NASA's Kepler space telescope. We present the asteroseismic diagrams of the asymptotic parameters δν_02, δν_01 and ε, which show clear correlation with fundamental stellar parameters such as mass and radius. When the stellar populations from the clusters are compared, we see evidence for a difference in mass of the red giant branch stars, and possibly a difference in structure of the red clump stars, from our measurements of the small separations δν_02 and δν_01. Ensemble échelle diagrams and upper limits to the linewidths of l = 0 modes as a function of Δνof the clusters NGC 6791 and NGC 6819 are also shown, together with the correlation between the l = 0 ridge width and the T_eff of the stars. Lastly, we distinguish between red giant branch and red clump stars through the measurement of the period spacing of mixed dipole modes in 53 stars among all the three clusters to verify the stellar classification from the color-magnitude diagram. These seismic results also allow us to identify a number of special cases, including evolved blue stragglers and binaries, as well as stars in late He-core burning phases, which can be potentially interesting targets for detailed theoretical modeling. △ Less

Submitted 7 August, 2012; v1 submitted 17 May, 2012; originally announced May 2012.

Comments: 30 pages, 15 figures, 1 table, accepted to ApJ

A Class of Eccentric Binaries with Dynamic Tidal Distortions Discovered with Kepler

Authors: Susan E. Thompson, Mark Everett, Fergal Mullally, Thomas Barclay, Steve B. Howell, Martin Still, Jason Rowe, Jessie L. Christiansen, Donald W. Kurtz, Kelly Hambleton, Joseph D. Twicken, Khadeejah A. Ibrahim, Bruce D. Clarke

Abstract: We have discovered a class of eccentric binary systems within the Kepler data archive that have dynamic tidal distortions and tidally-induced pulsations. Each has a uniquely shaped light curve that is characterized by periodic brightening or variability at time scales of 4-20 days, frequently accompanied by shorter period oscillations. We can explain the dominant features of the entire class with… ▽ More We have discovered a class of eccentric binary systems within the Kepler data archive that have dynamic tidal distortions and tidally-induced pulsations. Each has a uniquely shaped light curve that is characterized by periodic brightening or variability at time scales of 4-20 days, frequently accompanied by shorter period oscillations. We can explain the dominant features of the entire class with orbitally-varying tidal forces that occur in close, eccentric binary systems. The large variety of light curve shapes arises from viewing systems at different angles. This hypothesis is supported by spectroscopic radial velocity measurements for five systems, each showing evidence of being in an eccentric binary system. Prior to the discovery of these 17 new systems, only four stars, where KOI-54 is the best example, were known to have evidence of these dynamic tides and tidally-induced oscillations. We perform preliminary fits to the light curves and radial velocity data, present the overall properties of this class and discuss the work required to accurately model these systems. △ Less

Submitted 27 March, 2012; originally announced March 2012.

Comments: 13 pages, submitted to ApJ

Planetary Candidates Observed by Kepler, III: Analysis of the First 16 Months of Data

Authors: Natalie M. Batalha, Jason F. Rowe, Stephen T. Bryson, Thomas Barclay, Christopher J. Burke, Douglas A. Caldwell, Jessie L. Christiansen, Fergal Mullally, Susan E. Thompson, Timothy M. Brown, Andrea K. Dupree, Daniel C. Fabrycky, Eric B. Ford, Jonathan J. Fortney, Ronald L. Gilliland, Howard Isaacson, David W. Latham, Geoffrey W. Marcy, Samuel Quinn, Darin Ragozzine, Avi Shporer, William J. Borucki, David R. Ciardi, Thomas N. Gautier III, Michael R. Haas , et al. (47 additional authors not shown)

Abstract: New transiting planet candidates are identified in sixteen months (May 2009 - September 2010) of data from the Kepler spacecraft. Nearly five thousand periodic transit-like signals are vetted against astrophysical and instrumental false positives yielding 1,091 viable new planet candidates, bringing the total count up to over 2,300. Improved vetting metrics are employed, contributing to higher cat… ▽ More New transiting planet candidates are identified in sixteen months (May 2009 - September 2010) of data from the Kepler spacecraft. Nearly five thousand periodic transit-like signals are vetted against astrophysical and instrumental false positives yielding 1,091 viable new planet candidates, bringing the total count up to over 2,300. Improved vetting metrics are employed, contributing to higher catalog reliability. Most notable is the noise-weighted robust averaging of multi-quarter photo-center offsets derived from difference image analysis which identifies likely background eclipsing binaries. Twenty-two months of photometry are used for the purpose of characterizing each of the new candidates. Ephemerides (transit epoch, T_0, and orbital period, P) are tabulated as well as the products of light curve modeling: reduced radius (Rp/R*), reduced semi-major axis (d/R*), and impact parameter (b). The largest fractional increases are seen for the smallest planet candidates (197% for candidates smaller than 2Re compared to 52% for candidates larger than 2Re) and those at longer orbital periods (123% for candidates outside of 50-day orbits versus 85% for candidates inside of 50-day orbits). The gains are larger than expected from increasing the observing window from thirteen months (Quarter 1-- Quarter 5) to sixteen months (Quarter 1 -- Quarter 6). This demonstrates the benefit of continued development of pipeline analysis software. The fraction of all host stars with multiple candidates has grown from 17% to 20%, and the paucity of short-period giant planets in multiple systems is still evident. The progression toward smaller planets at longer orbital periods with each new catalog release suggests that Earth-size planets in the Habitable Zone are forthcoming if, indeed, such planets are abundant. △ Less

Submitted 27 February, 2012; originally announced February 2012.

Comments: Submitted to ApJS. Machine-readable tables are available at http://kepler.nasa.gov, http://archive.stsci.edu/kepler/results.html, and the NASA Exoplanet Archive

Asteroseismology of the solar analogs 16 Cyg A & B from Kepler observations

Authors: T. S. Metcalfe, W. J. Chaplin, T. Appourchaux, R. A. Garcia, S. Basu, I. Brandao, O. L. Creevey, S. Deheuvels, G. Dogan, P. Eggenberger, C. Karoff, A. Miglio, D. Stello, M. Yildiz, Z. Celik, H. M. Antia, O. Benomar, R. Howe, C. Regulo, D. Salabert, T. Stahn, T. R. Bedding, G. R. Davies, Y. Elsworth, L. Gizon , et al. (12 additional authors not shown)

Abstract: The evolved solar-type stars 16 Cyg A & B have long been studied as solar analogs, yielding a glimpse into the future of our own Sun. The orbital period of the binary system is too long to provide meaningful dynamical constraints on the stellar properties, but asteroseismology can help because the stars are among the brightest in the Kepler field. We present an analysis of three months of nearly u… ▽ More The evolved solar-type stars 16 Cyg A & B have long been studied as solar analogs, yielding a glimpse into the future of our own Sun. The orbital period of the binary system is too long to provide meaningful dynamical constraints on the stellar properties, but asteroseismology can help because the stars are among the brightest in the Kepler field. We present an analysis of three months of nearly uninterrupted photometry of 16 Cyg A & B from the Kepler space telescope. We extract a total of 46 and 41 oscillation frequencies for the two components respectively, including a clear detection of octupole (l=3) modes in both stars. We derive the properties of each star independently using the Asteroseismic Modeling Portal, fitting the individual oscillation frequencies and other observational constraints simultaneously. We evaluate the systematic uncertainties from an ensemble of results generated by a variety of stellar evolution codes and fitting methods. The optimal models derived by fitting each component individually yield a common age (t=6.8+/-0.4 Gyr) and initial composition (Z_i=0.024+/-0.002, Y_i=0.25+/-0.01) within the uncertainties, as expected for the components of a binary system, bolstering our confidence in the reliability of asteroseismic techniques. The longer data sets that will ultimately become available will allow future studies of differential rotation, convection zone depths, and long-term changes due to stellar activity cycles. △ Less

Submitted 15 February, 2012; v1 submitted 28 January, 2012; originally announced January 2012.

Comments: 6 pages, 2 figures, 2 tables, ApJ Letters (accepted)

Journal ref: Astrophys.J.748:L10,2012

Transit Timing Observations from Kepler: II. Confirmation of Two Multiplanet Systems via a Non-parametric Correlation Analysis

Authors: Eric B. Ford, Daniel C. Fabrycky, Jason H. Steffen, Joshua A. Carter, Francois Fressin, Matthew J. Holman, Jack J. Lissauer, Althea V. Moorhead, Robert C. Morehead, Darin Ragozzine, Jason F. Rowe, William F. Welsh, Christopher Allen, Natalie M. Batalha, William J. Borucki, Stephen T. Bryson, Lars A. Buchhave, Christopher J. Burke, Douglas A. Caldwell, David Charbonneau, Bruce D. Clarke, William D. Cochran, Jean-Michel Désert, Michael Endl, Mark E. Everett , et al. (26 additional authors not shown)

Abstract: We present a new method for confirming transiting planets based on the combination of transit timingn variations (TTVs) and dynamical stability. Correlated TTVs provide evidence that the pair of bodies are in the same physical system. Orbital stability provides upper limits for the masses of the transiting companions that are in the planetary regime. This paper describes a non-parametric technique… ▽ More We present a new method for confirming transiting planets based on the combination of transit timingn variations (TTVs) and dynamical stability. Correlated TTVs provide evidence that the pair of bodies are in the same physical system. Orbital stability provides upper limits for the masses of the transiting companions that are in the planetary regime. This paper describes a non-parametric technique for quantifying the statistical significance of TTVs based on the correlation of two TTV data sets. We apply this method to an analysis of the transit timing variations of two stars with multiple transiting planet candidates identified by Kepler. We confirm four transiting planets in two multiple planet systems based on their TTVs and the constraints imposed by dynamical stability. An additional three candidates in these same systems are not confirmed as planets, but are likely to be validated as real planets once further observations and analyses are possible. If all were confirmed, these systems would be near 4:6:9 and 2:4:6:9 period commensurabilities. Our results demonstrate that TTVs provide a powerful tool for confirming transiting planets, including low-mass planets and planets around faint stars for which Doppler follow-up is not practical with existing facilities. Continued Kepler observations will dramatically improve the constraints on the planet masses and orbits and provide sensitivity for detecting additional non-transiting planets. If Kepler observations were extended to eight years, then a similar analysis could likely confirm systems with multiple closely spaced, small transiting planets in or near the habitable zone of solar-type stars. △ Less

Submitted 25 January, 2012; originally announced January 2012.

Comments: 23 pages, 8 figures, 4 tables, 1 electronic table, accepted to ApJ

Transit Timing Observations from Kepler: VI. Transit Timing Variation Candidates in the First Seventeen Months from Polynomial Models

Authors: Eric B. Ford, Darin Ragozzine, Jason F. Rowe, Jason H. Steffen, Thomas Barclay, Natalie M. Batalha, William J. Borucki, Stephen T. Bryson, Douglas A. Caldwell, Daniel C. Fabrycky, Thomas N. Gautier III, Matthew J. Holman, Khadeejah A. Ibrahim, Hans Kjeldsen, Karen Kinemuchi, David G. Koch, Jack J. Lissauer, Martin Still, Peter Tenenbaum, Kamal Uddin, William Welsh

Abstract: Transit timing variations provide a powerful tool for confirming and characterizing transiting planets, as well as detecting non-transiting planets. We report the results an updated TTV analysis for 1481 planet candidates (Borucki et al. 2011; Batalha et al. 2012) based on transit times measured during the first sixteen months of Kepler observations. We present 39 strong TTV candidates based on lo… ▽ More Transit timing variations provide a powerful tool for confirming and characterizing transiting planets, as well as detecting non-transiting planets. We report the results an updated TTV analysis for 1481 planet candidates (Borucki et al. 2011; Batalha et al. 2012) based on transit times measured during the first sixteen months of Kepler observations. We present 39 strong TTV candidates based on long-term trends (2.8% of suitable data sets). We present another 136 weaker TTV candidates (9.8% of suitable data sets) based on excess scatter of TTV measurements about a linear ephemeris. We anticipate that several of these planet candidates could be confirmed and perhaps characterized with more detailed TTV analyses using publicly available Kepler observations. For many others, Kepler has observed a long-term TTV trend, but an extended Kepler mission will be required to characterize the system via TTVs. We find that the occurrence rate of planet candidates that show TTVs is significantly increased (~68%) for planet candidates transiting stars with multiple transiting planet candidate when compared to planet candidates transiting stars with a single transiting planet candidate. △ Less

Submitted 14 July, 2012; v1 submitted 9 January, 2012; originally announced January 2012.

Comments: Accepted to ApJ; 9 pages, incl. 3 B&W figures, 1 table, 2 electronic datasets available as ancillary files; Includes analyses of more planet candidates; Transit times and additional figures at http://www.astro.ufl.edu/~eford/data/kepler/

Kepler-20: A Sun-like Star with Three Sub-Neptune Exoplanets and Two Earth-size Candidates

Authors: Thomas N. Gautier III, David Charbonneau, Jason F. Rowe, Geoffrey W. Marcy, Howard Isaacson, Guillermo Torres, Francois Fressin, Leslie A. Rogers, Jean-Michel Désert, Lars A. Buchhave, David W. Latham, Samuel N. Quinn, David R. Ciardi, Daniel C. Fabrycky, Eric B. Ford, Ronald L. Gilliland, Lucianne M. Walkowicz, Stephen T. Bryson, William D. Cochran, Michael Endl, Debra A. Fischer, Steve B. Howel, Elliott P. Horch, Thomas Barclay, Natalie Batalha , et al. (19 additional authors not shown)

Abstract: We present the discovery of the Kepler-20 planetary system, which we initially identified through the detection of five distinct periodic transit signals in the Kepler light curve of the host star 2MASSJ19104752+4220194. We find a stellar effective temperature Teff=5455+-100K, a metallicity of [Fe/H]=0.01+-0.04, and a surface gravity of log(g)=4.4+-0.1. Combined with an estimate of the stellar den… ▽ More We present the discovery of the Kepler-20 planetary system, which we initially identified through the detection of five distinct periodic transit signals in the Kepler light curve of the host star 2MASSJ19104752+4220194. We find a stellar effective temperature Teff=5455+-100K, a metallicity of [Fe/H]=0.01+-0.04, and a surface gravity of log(g)=4.4+-0.1. Combined with an estimate of the stellar density from the transit light curves we deduce a stellar mass of Mstar=0.912+-0.034 Msun and a stellar radius of Rstar=0.944^{+0.060}_{-0.095} Rsun. For three of the transit signals, our results strongly disfavor the possibility that these result from astrophysical false positives. We conclude that the planetary scenario is more likely than that of an astrophysical false positive by a factor of 2e5 (Kepler-20b), 1e5 (Kepler-20c), and 1.1e3 (Kepler-20d), sufficient to validate these objects as planetary companions. For Kepler-20c and Kepler-20d, the blend scenario is independently disfavored by the achromaticity of the transit: From Spitzer data gathered at 4.5um, we infer a ratio of the planetary to stellar radii of 0.075+-0.015 (Kepler-20c) and 0.065+-0.011 (Kepler-20d), consistent with each of the depths measured in the Kepler optical bandpass. We determine the orbital periods and physical radii of the three confirmed planets to be 3.70d and 1.91^{+0.12}_{-0.21} Rearth for Kepler-20b, 10.85 d and 3.07^{+0.20}_{-0.31} Rearth for Kepelr-20c, and 77.61 d and 2.75^{+0.17}_{-0.30} Rearth for Kepler-20d. From multi-epoch radial velocities, we determine the masses of Kepler-20b and Kepler-20c to be 8.7\+-2.2 Mearth and 16.1+-3.5 Mearth, respectively, and we place an upper limit on the mass of Kepler-20d of 20.1 Mearth (2 sigma). △ Less

Submitted 31 January, 2012; v1 submitted 19 December, 2011; originally announced December 2011.

Comments: accepted by ApJ, 58 pages, 12 figures revised Jan 2012 to correct table 2 and clarify planet parameter extraction

Fast core rotation in red-giant stars revealed by gravity-dominated mixed modes

Authors: Paul G. Beck, Josefina Montalban, Thomas Kallinger, Joris De Ridder, Conny Aerts, Rafael A. García, Saskia Hekker, Marc-Antoine Dupret, Benoit Mosser, Patrick Eggenberger, Dennis Stello, Yvonne Elsworth, Søren Frandsen, Fabien Carrier, Michel Hillen, Michael Gruberbauer, Jørgen Christensen-Dalsgaard, Andrea Miglio, Marica Valentini, Timothy R. Bedding, Hans Kjeldsen, Forrest R. Girouard, Jennifer R. Hall, Khadeejah A. Ibrahim

Abstract: When the core hydrogen is exhausted during stellar evolution, the central region of a star contracts and the outer envelope expands and cools, giving rise to a red giant, in which convection occupies a large fraction of the star. Conservation of angular momentum requires that the cores of these stars rotate faster than their envelopes, and indirect evidence supports this. Information about the ang… ▽ More When the core hydrogen is exhausted during stellar evolution, the central region of a star contracts and the outer envelope expands and cools, giving rise to a red giant, in which convection occupies a large fraction of the star. Conservation of angular momentum requires that the cores of these stars rotate faster than their envelopes, and indirect evidence supports this. Information about the angular momentum distribution is inaccessible to direct observations, but it can be extracted from the effect of rotation on oscillation modes that probe the stellar interior. Here, we report the detection of non-rigid rotation in the interiors of red-giant stars by exploiting the rotational frequency splitting of recently detected mixed modes. We demonstrate an increasing rotation rate from the surface of the star to the stellar core. Comparing with theoretical stellar models, we conclude that the core must rotate at least ten times faster than the surface. This observational result confirms the theoretical prediction of a steep gradient in the rotation profile towards the deep stellar interior. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Comments: to appear as a Letter to Nature

A First Comparison of Kepler Planet Candidates in Single and Multiple Systems

Authors: David W. Latham, Jason F. Rowe, Samuel N. Quinn, Natalie M. Batalha, William J. Borucki, Timothy M. Brown, Stephen T. Bryson, Lars A. Buchhave, Douglas A. Caldwell, Joshua A. Carter, Jesse L. Christiansen, David R. Ciardi, William D. Cochran, Edward W. Dunham, Daniel C. Fabrycky, Eric B. Ford, Thomas N. Gautier III, Ronald L. Gilliland, Matthew J. Holman, Steve B. Howell, Khadeejah A. Ibrahim, Howard Isaacson, Gibor Basri, Gabor Furesz, John C. Geary , et al. (11 additional authors not shown)

Abstract: In this letter we present an overview of the rich population of systems with multiple candidate transiting planets found in the first four months of Kepler data. The census of multiples includes 115 targets that show 2 candidate planets, 45 with 3, 8 with 4, and 1 each with 5 and 6, for a total of 170 systems with 408 candidates. When compared to the 827 systems with only one candidate, the multip… ▽ More In this letter we present an overview of the rich population of systems with multiple candidate transiting planets found in the first four months of Kepler data. The census of multiples includes 115 targets that show 2 candidate planets, 45 with 3, 8 with 4, and 1 each with 5 and 6, for a total of 170 systems with 408 candidates. When compared to the 827 systems with only one candidate, the multiples account for 17 percent of the total number of systems, and a third of all the planet candidates. We compare the characteristics of candidates found in multiples with those found in singles. False positives due to eclipsing binaries are much less common for the multiples, as expected. Singles and multiples are both dominated by planets smaller than Neptune; 69 +2/-3 percent for singles and 86 +2/-5 percent for multiples. This result, that systems with multiple transiting planets are less likely to include a transiting giant planet, suggests that close-in giant planets tend to disrupt the orbital inclinations of small planets in flat systems, or maybe even to prevent the formation of such systems in the first place. △ Less

Submitted 20 March, 2011; originally announced March 2011.

Comments: 13 pages, 13 figures, submitted to ApJ Letters

Characterisation of red-giant stars in the public Kepler data

Authors: S. Hekker, R. L. Gilliland, Y. Elsworth, W. J. Chaplin, J. De Ridder, D. Stello, T. Kallinger, K. A. Ibrahim, T. C. Klaus, J. Li

Abstract: The first public release of long-cadence stellar photometric data collected by the NASA Kepler mission has now been made available. In this paper we characterise the red-giant (G-K) stars in this large sample in terms of their solar-like oscillations. We use published methods and well-known scaling relations in the analysis. Just over 70% of the red giants in the sample show detectable solar-like… ▽ More The first public release of long-cadence stellar photometric data collected by the NASA Kepler mission has now been made available. In this paper we characterise the red-giant (G-K) stars in this large sample in terms of their solar-like oscillations. We use published methods and well-known scaling relations in the analysis. Just over 70% of the red giants in the sample show detectable solar-like oscillations, and from these oscillations we are able to estimate the fundamental properties of the stars. This asteroseismic analysis reveals different populations: low-luminosity H-shell burning red-giant branch stars, cool high-luminosity red giants on the red-giant branch and He-core burning clump and secondary-clump giants. △ Less

Submitted 1 March, 2011; originally announced March 2011.

Comments: Accepted for publication in Monthly Notices of the Royal Astronomical Society Main Journal

Sounding open clusters: asteroseismic constraints from Kepler on the properties of NGC 6791 and NGC 6819

Authors: Sarbani Basu, Frank Grundahl, Dennis Stello, Thomas Kallinger, Saskia Hekker, Benoit Mosser, Rafael A. Garcia, Savita Mathur, Karsten Brogaard, Hans Bruntt, William J. Chaplin, Ning Gai Yvonne Elsworth, Lisa Esch, Jerome Ballot, Timothy R. Bedding, Michael Gruberbauer, Daniel Huber, Andrea Miglio, Mutlu Yildiz, Hans Kjeldsen, Joergen Christensen-Dalsgaard, Ronald L. Gilliland, Michael M. Fanelli, Khadeejah A. Ibrahim, Jeffrey C. Smith

Abstract: We present initial results on some of the properties of open clusters NGC 6791 and NGC 6819 derived from asteroseismic data obtained by NASA's Kepler mission. In addition to estimating the mass, radius and log g of stars on the red-giant branch of these clusters, we estimate the distance to the clusters and their ages. Our model-independent estimate of the distance modulus of NGC 6791 is (m-M)_0=… ▽ More We present initial results on some of the properties of open clusters NGC 6791 and NGC 6819 derived from asteroseismic data obtained by NASA's Kepler mission. In addition to estimating the mass, radius and log g of stars on the red-giant branch of these clusters, we estimate the distance to the clusters and their ages. Our model-independent estimate of the distance modulus of NGC 6791 is (m-M)_0= 13.11\pm 0.06. We find (m-M)_0= 11.85\pm 0.05 for NGC 6819. The average mass of stars on the red-giant branch of NGC 6791 is 1.20 \pm 0.01 M_sun, while that of NGC 6819 is 1.68\pm 0.03M_sun. It should be noted that we do not have data that cover the entire red-giant branch and the actual mass will be somewhat lower. We have determined model-dependent estimates of ages of these clusters. We find ages between 6.8 and 8.6 Gyr for NGC 6791, however, most sets of models give ages around 7Gyr. We obtain ages between 2 and 2.4 Gyr for NGC 6819. △ Less

Submitted 10 February, 2011; originally announced February 2011.

Comments: Published in Astrophys. J. Letters

Journal ref: ApJ, 729, L10 (2011)

KOI-54: The Kepler Discovery of Tidally-Excited Pulsations and Brightenings in a Highly Eccentric Binary

Authors: William F. Welsh, Jerome A. Orosz, Conny Aerts, Timothy M. Brown, Erik Brugamyer, William D. Cochran, Ronald L. Gilliland, Joyce Ann Guzik, D. W. Kurtz, David W. Latham, Geoffrey W. Marcy, Samuel N. Quinn, Wolfgang Zima, Christopher Allen, Natalie M. Batalha, Steve Bryson, Lars A. Buchhave, Douglas A. Caldwell, Thomas N. Gautier III, Steve B. Howell, K. Kinemuchi, Khadeejah A. Ibrahim, Howard Isaacson, Jon M. Jenkins, Andrej Prsa , et al. (5 additional authors not shown)

Abstract: Kepler observations of the star HD 187091 (KID 8112039, hereafter KOI-54) revealed a remarkable light curve exhibiting sharp periodic brightening events every 41.8 days with a superimposed set of oscillations forming a beating pattern in phase with the brightenings. Spectroscopic observations revealed that this is a binary star with a highly eccentric orbit, e=0.83. We are able to match the Kepler… ▽ More Kepler observations of the star HD 187091 (KID 8112039, hereafter KOI-54) revealed a remarkable light curve exhibiting sharp periodic brightening events every 41.8 days with a superimposed set of oscillations forming a beating pattern in phase with the brightenings. Spectroscopic observations revealed that this is a binary star with a highly eccentric orbit, e=0.83. We are able to match the Kepler light curve and radial velocities with a nearly face-on (i=5.5 degree) binary star model in which the brightening events are caused by tidal distortion and irradiation of nearly identical A stars during their close periastron passage. The two dominant oscillations in the light curve, responsible for the beating pattern, have frequencies that are the 91st and 90th harmonic of the orbital frequency. The power spectrum of the light curve, after removing the binary star brightening component, reveals a large number of pulsations, 30 of which have a signal-to-noise ratio > 7. Nearly all of these pulsations have frequencies that are either integer multiples of the orbital frequency or are tidally-split multiples of the orbital frequency. This pattern of frequencies unambiguously establishes the pulsations as resonances between the dynamic tides at periastron and the free oscillation modes of one of the stars. KOI-54 is only the 4th star to show such a phenomenon, and is by far the richest in terms of excited modes. △ Less

Submitted 1 September, 2011; v1 submitted 8 February, 2011; originally announced February 2011.

Comments: revised and accepted by ApJ; 7 figures

Regularities in frequency spacings of Delta Scuti stars: The Kepler star KIC 9700322

Authors: M. Breger, L. Balona, P. Lenz, J. K. Hollek, D. W. Kurtz, G. Catanzaro, M. Marconi, A. A. Pamyatnykh, B. Smalley, J. C. Suarez, R. Szabo, K. Uytterhoeven, V. Ripepi, J. Christensen-Dalsgaard, H. Kjeldsen, M. N. Fanelli, K. A. Ibrahim, K. Uddin

Abstract: In the faint star KIC 9700322 observed by the Kepler satellite, 76 frequencies with amplitudes from 14 to 29000 ppm were detected. The two dominant frequencies at 9.79 and 12.57 c/d (113.3 and 145.5 μHz), interpreted to be radial modes, are accompanied by a large number of combination frequencies. A small additional modulation with a 0.16 c/d frequency is also seen; this is interpreted to be the r… ▽ More In the faint star KIC 9700322 observed by the Kepler satellite, 76 frequencies with amplitudes from 14 to 29000 ppm were detected. The two dominant frequencies at 9.79 and 12.57 c/d (113.3 and 145.5 μHz), interpreted to be radial modes, are accompanied by a large number of combination frequencies. A small additional modulation with a 0.16 c/d frequency is also seen; this is interpreted to be the rotation frequency of the star. The corresponding prediction of slow rotation is confirmed by a spectrum from which v sin i = 19 \pm 1 km/s is obtained. The analysis of the spectrum shows that the star is one of the coolest δ Sct variables. We also determine Teff = 6700 \pm 100 K and log g = 3.7 \pm 0.1, compatible with the observed frequencies of the radial modes. Normal solar abundances are found. An \ell = 2 frequency quintuplet is also detected with a frequency separation consistent with predictions from the measured rotation rate. A remarkable result is the absence of additional independent frequencies down to an amplitude limit near 14 ppm, suggesting that the star is stable against most forms of nonradial pulsation. The frequency spectrum of this star emphasizes the need for caution in interpreting low frequencies in δ Sct stars as independent gravity modes. A low frequency peak at 2.7763 c/d in KIC 9700322 is, in fact, the frequency difference between the two dominant modes and is repeated over and over in various frequency combinations involving the two dominant modes. The relative phases of the combination frequencies show a strong correlation with frequency, but the physical significance of this result is not clear. △ Less

Submitted 17 February, 2011; v1 submitted 20 December, 2010; originally announced December 2010.

Discovery and Rossiter-McLaughlin Effect of Exoplanet Kepler-8b

Authors: Jon M. Jenkins, William J. Borucki, David G. Koch, Geoffrey W. Marcy, William D. Cochran, Gibor Basri, Natalie M. Batalha, Lars A. Buchhave, Tim M. Brown, Douglas A. Caldwell, Edward W. Dunham, Michael Endl, Debra A. Fischer, Thomas N. Gautier III, John C. Geary, Ronald L. Gilliland, Steve B. Howell, Howard Isaacson, John Asher Johnson, David W. Latham, Jack J. Lissauer, David G. Monet, Jason F. Rowe, Dimitar D. Sasselov, William F. Welsh , et al. (28 additional authors not shown)

Abstract: We report the discovery and the Rossiter-McLaughlin effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius RP = 1.419 RJ and a mass, MP = 0.60 MJ, yielding a density of 0.26 g cm^-3, among the lowest density planets known… ▽ More We report the discovery and the Rossiter-McLaughlin effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius RP = 1.419 RJ and a mass, MP = 0.60 MJ, yielding a density of 0.26 g cm^-3, among the lowest density planets known. The orbital period is P = 3.523 days and orbital semima jor axis is 0.0483+0.0006/-0.0012 AU. The star has a large rotational v sin i of 10.5 +/- 0.7 km s^-1 and is relatively faint (V = 13.89 mag), both properties deleterious to precise Doppler measurements. The velocities are indeed noisy, with scatter of 30 m s^-1, but exhibit a period and phase consistent with the planet implied by the photometry. We securely detect the Rossiter-McLaughlin effect, confirming the planet's existence and establishing its orbit as prograde. We measure an inclination between the projected planetary orbital axis and the projected stellar rotation axis of lambda = -26.9 +/- 4.6 deg, indicating a moderate inclination of the planetary orbit. Rossiter-McLaughlin measurements of a large sample of transiting planets from Kepler will provide a statistically robust measure of the true distribution of spin-orbit orientations for hot jupiters in general. △ Less

Submitted 4 January, 2010; originally announced January 2010.

Comments: 26 pages, 8 figures, 2 tables; In preparation for submission to the Astrophysical Journal