-
Structure-stiffness relation of live mouse brain tissue determined by depth-controlled indentation map**
Authors:
Nelda Antonovaite,
Steven V. Beekmans,
Elly M. Hol,
Wytse J. Wadman,
Davide Iannuzzi
Abstract:
The mechanical properties of brain tissue play a pivotal role in neurodevelopment and neurological disorders. Yet, at present, there is no consensus on how the different structural parts of the tissue contribute to its stiffness variations. Here, we have gathered depth-controlled indentation viscoelasticity maps of the hippocampus of isolated horizontal live mouse brain sections. Our results confi…
▽ More
The mechanical properties of brain tissue play a pivotal role in neurodevelopment and neurological disorders. Yet, at present, there is no consensus on how the different structural parts of the tissue contribute to its stiffness variations. Here, we have gathered depth-controlled indentation viscoelasticity maps of the hippocampus of isolated horizontal live mouse brain sections. Our results confirm the highly viscoelestic nature of the material and clearly show that the mechanical properties correlate with the different morphological layers of the samples investigated. Interestingly, the relative cell nuclei area seems to negatively correlate with the stiffness observed.
△ Less
Submitted 6 February, 2018;
originally announced February 2018.
-
Investigation of the concept of beauty via a lock-in feedback experiment
Authors:
M. C. Kaptein,
R. van Emden,
D. Iannuzzi
Abstract:
Lock-in feedback circuits are routinely used in physics laboratories all around the world to extract small signals out of a noisy environment. In a recent paper (M. Kaptein, R. van Emden, and D. Iannuzzi, paper under review), we have shown that one can adapt the algorithm exploited in those circuits to gain insight in behavioral economics. In this paper, we extend this concept to a very subjective…
▽ More
Lock-in feedback circuits are routinely used in physics laboratories all around the world to extract small signals out of a noisy environment. In a recent paper (M. Kaptein, R. van Emden, and D. Iannuzzi, paper under review), we have shown that one can adapt the algorithm exploited in those circuits to gain insight in behavioral economics. In this paper, we extend this concept to a very subjective socio-philosophical concept: the concept of beauty. We run an experiment on 7414 volunteers, asking them to express their opinion on the physical features of an avatar. Each participant was prompted with an image whose features were adjusted sequentially via a lock-in feedback algorithm driven by the opinion expressed by the previous participants. Our results show that the method allows one to identify the most attractive features of the avatar.
△ Less
Submitted 27 July, 2016;
originally announced July 2016.
-
Force sensor for chameleon and Casimir force experiments with parallel-plate configuration
Authors:
Attaallah Almasi,
Philippe Brax,
Davide Iannuzzi,
René I. P. Sedmik
Abstract:
The search for non-Newtonian forces has been pursued following many different paths. Recently it was suggested that hypothetical chameleon interactions, which might explain the mechanisms behind dark energy, could be detected in a high-precision force measurement. In such an experiment, interactions between parallel plates kept at constant separation could be measured as a function of the pressure…
▽ More
The search for non-Newtonian forces has been pursued following many different paths. Recently it was suggested that hypothetical chameleon interactions, which might explain the mechanisms behind dark energy, could be detected in a high-precision force measurement. In such an experiment, interactions between parallel plates kept at constant separation could be measured as a function of the pressure of an ambient gas, thereby identifying chameleon interactions by their unique inverse dependence on the local mass density. During the past years we have been develo** a new kind of setup complying with the high requirements of the proposed experiment. In this article we present the first and most important part of this setup -- the force sensor. We discuss its design, fabrication, and characterization. From the results of the latter we derive limits on chameleon interaction parameters that could be set by the forthcoming experiment. Finally, we describe the opportunity to use the same setup to measure Casimir forces at large surface separations with unprecedented accuracy, thereby potentially giving unambiguous answers to long standing open questions.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
The locality of surface interactions on colloidal probes
Authors:
René I. P. Sedmik,
Attaallah Almasi,
Davide Iannuzzi
Abstract:
The Casimir and electromagnetic interactions between objects at short separations are strongly influenced by the local geometry near the point of closest approach. In this paper we demonstrate that the assumptions underlying common statistical analysis of roughness may not hold in experiments using micro-spheres as interacting objects. Based on an extensive experimental and numerical analysis of t…
▽ More
The Casimir and electromagnetic interactions between objects at short separations are strongly influenced by the local geometry near the point of closest approach. In this paper we demonstrate that the assumptions underlying common statistical analysis of roughness may not hold in experiments using micro-spheres as interacting objects. Based on an extensive experimental and numerical analysis of the surface topology of the widely used colloidal particle types 4310A and 4320A, we show that the actual variation in the local surface curvature may give rise to large uncertainties in the comparison of experimental data to theories.
△ Less
Submitted 1 May, 2015;
originally announced May 2015.
-
Lock in Feedback in Sequential Experiments
Authors:
Maurits Kaptein,
Davide Iannuzzi
Abstract:
We often encounter situations in which an experimenter wants to find, by sequential experimentation, $x_{max} = \arg\max_{x} f(x)$, where $f(x)$ is a (possibly unknown) function of a well controllable variable $x$. Taking inspiration from physics and engineering, we have designed a new method to address this problem. In this paper, we first introduce the method in continuous time, and then present…
▽ More
We often encounter situations in which an experimenter wants to find, by sequential experimentation, $x_{max} = \arg\max_{x} f(x)$, where $f(x)$ is a (possibly unknown) function of a well controllable variable $x$. Taking inspiration from physics and engineering, we have designed a new method to address this problem. In this paper, we first introduce the method in continuous time, and then present two algorithms for use in sequential experiments. Through a series of simulation studies, we show that the method is effective for finding maxima of unknown functions by experimentation, even when the maximum of the functions drifts or when the signal to noise ratio is low.
△ Less
Submitted 12 January, 2016; v1 submitted 2 February, 2015;
originally announced February 2015.
-
Measurement of the Casimir force with a ferrule-top sensor
Authors:
P. Zuurbier,
S. de Man,
G. Gruca,
K. Heeck,
D. Iannuzzi
Abstract:
We present a Casimir force setup based on an all-optical ferrule-top sensor. We demonstrate that the instrument can be used to measure the gradient of the Casimir force between a gold coated sphere and a gold coated plate with results that are comparable to those achieved by similar atomic force microscope experiments. Thanks to the monolithic design of the force sensor (which does not require any…
▽ More
We present a Casimir force setup based on an all-optical ferrule-top sensor. We demonstrate that the instrument can be used to measure the gradient of the Casimir force between a gold coated sphere and a gold coated plate with results that are comparable to those achieved by similar atomic force microscope experiments. Thanks to the monolithic design of the force sensor (which does not require any optical triangulation readout) and to the absence of electronics on the sensing head, the instrument represents a significant step ahead for future studies of the Casimir effect under engineered conditions, where the intervening medium or the environmental conditions might be unsuitable for the use of more standard setups.
△ Less
Submitted 15 February, 2011;
originally announced February 2011.
-
Halving the Casimir force with conductive oxides: experimental details
Authors:
Sven de Man,
Kier Heeck,
Davide Iannuzzi
Abstract:
This work is an extended version of a paper published last year in Physical Review Letters [S. de Man et al., Phys. Rev. Lett. 103, 040402 (2009)], where we presented measurements of the Casimir force between a gold coated sphere and a plate coated with either gold or an indium-tin-oxide (ITO) layer. The experiment, which was performed in air, showed that ITO is sufficiently conducting to prevent…
▽ More
This work is an extended version of a paper published last year in Physical Review Letters [S. de Man et al., Phys. Rev. Lett. 103, 040402 (2009)], where we presented measurements of the Casimir force between a gold coated sphere and a plate coated with either gold or an indium-tin-oxide (ITO) layer. The experiment, which was performed in air, showed that ITO is sufficiently conducting to prevent charge accumulation, but still transparent enough to halve the Casimir attraction when compared to gold. Here, we report all the experimental details that, due to the limited space available, were omitted in the previous article. We discuss the performance of our setup in terms of stability of the calibration procedure and reproducibility of the Casimir force measurement. We also introduce and demonstrate a new technique to obtain the spring constant of our force sensor. Furthermore, we present a thorough description of the experimental method, a comprehensive explanation of data elaboration and error analysis, and a complete characterization of the dielectric function and of the surface roughness of the samples used in the actual experiment.
△ Less
Submitted 17 December, 2010;
originally announced December 2010.
-
Tuning the Mass of Chameleon Fields in Casimir Force Experiments
Authors:
Ph. Brax,
C. van de Bruck,
A. C. Davis,
D. J. Shaw,
D. Iannuzzi
Abstract:
We have calculated the chameleon pressure between two parallel plates in the presence of an intervening medium that affects the mass of the chameleon field. As intuitively expected, the gas in the gap weakens the chameleon interaction mechanism with a screening effect that increases with the plate separation and with the density of the intervening medium. This phenomenon might open up new directio…
▽ More
We have calculated the chameleon pressure between two parallel plates in the presence of an intervening medium that affects the mass of the chameleon field. As intuitively expected, the gas in the gap weakens the chameleon interaction mechanism with a screening effect that increases with the plate separation and with the density of the intervening medium. This phenomenon might open up new directions in the search of chameleon particles with future long range Casimir force experiments.
△ Less
Submitted 8 March, 2010;
originally announced March 2010.
-
Halving the Casimir force with conductive oxides
Authors:
S. de Man,
K. Heeck,
R. J. Wijngaarden,
D. Iannuzzi
Abstract:
The possibility to modify the strength of the Casimir effect by tailoring the dielectric functions of the interacting surfaces is regarded as a unique opportunity in the development of Micro- and NanoElectroMechanical Systems. In air, however, one expects that, unless noble metals are used, the electrostatic force arising from trapped charges overcomes the Casimir attraction, leaving no room for…
▽ More
The possibility to modify the strength of the Casimir effect by tailoring the dielectric functions of the interacting surfaces is regarded as a unique opportunity in the development of Micro- and NanoElectroMechanical Systems. In air, however, one expects that, unless noble metals are used, the electrostatic force arising from trapped charges overcomes the Casimir attraction, leaving no room for exploitation of Casimir force engineering at ambient conditions. Here we show that, in the presence of a conductive oxide, the Casimir force can be the dominant interaction even in air, and that the use of conductive oxides allows one to reduce the Casimir force up to a factor of 2 when compared to noble metals.
△ Less
Submitted 17 June, 2009; v1 submitted 23 January, 2009;
originally announced January 2009.
-
No anomalous scaling in electrostatic calibrations for Casimir force measurements
Authors:
S. de Man,
K. Heeck,
D. Iannuzzi
Abstract:
In a recent paper (Phys.Rev.A78, 020101(R) (2008)), Kim at al. have reported a large anomaly in the scaling law of the electrostatic interaction between a sphere and a plate, which was observed during the calibration of their Casimir force set-up. Here we experimentally demonstrate that in proper electrostatic calibrations the scaling law follows the behavior expected from elementary electrostat…
▽ More
In a recent paper (Phys.Rev.A78, 020101(R) (2008)), Kim at al. have reported a large anomaly in the scaling law of the electrostatic interaction between a sphere and a plate, which was observed during the calibration of their Casimir force set-up. Here we experimentally demonstrate that in proper electrostatic calibrations the scaling law follows the behavior expected from elementary electrostatic arguments, even when the electrostatic voltage that one must apply to minimize the force (typically ascribed to contact potentials) depends on the separation between the surfaces.
△ Less
Submitted 6 February, 2009; v1 submitted 23 September, 2008;
originally announced September 2008.
-
Virtual photons in imaginary time: Computing exact Casimir forces via standard numerical-electromagnetism techniques
Authors:
Alejandro Rodriguez,
Mihai Ibanescu,
Davide Iannuzzi,
J. D. Joannopoulos,
Steven G. Johnson
Abstract:
We describe a numerical method to compute Casimir forces in arbitrary geometries, for arbitrary dielectric and metallic materials, with arbitrary accuracy (given sufficient computational resources). Our approach, based on well-established integration of the mean stress tensor evaluated via the fluctuation-dissipation theorem, is designed to directly exploit fast methods developed for classical c…
▽ More
We describe a numerical method to compute Casimir forces in arbitrary geometries, for arbitrary dielectric and metallic materials, with arbitrary accuracy (given sufficient computational resources). Our approach, based on well-established integration of the mean stress tensor evaluated via the fluctuation-dissipation theorem, is designed to directly exploit fast methods developed for classical computational electromagnetism, since it only involves repeated evaluation of the Green's function for imaginary frequencies (equivalently, real frequencies in imaginary time). We develop the approach by systematically examining various formulations of Casimir forces from the previous decades and evaluating them according to their suitability for numerical computation. We illustrate our approach with a simple finite-difference frequency-domain implementation, test it for known geometries such as a cylinder and a plate, and apply it to new geometries. In particular, we show that a piston-like geometry of two squares sliding between metal walls, in both two and three dimensions with both perfect and realistic metallic materials, exhibits a surprising non-monotonic ``lateral'' force from the walls.
△ Less
Submitted 16 October, 2007; v1 submitted 24 May, 2007;
originally announced May 2007.
-
Computation and visualization of Casimir forces in arbitrary geometries: non-monotonic lateral forces and failure of proximity-force approximations
Authors:
Alejandro Rodriguez,
Mihai Ibanescu,
Davide Iannuzzi,
Federico Capasso,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
We present a method of computing Casimir forces for arbitrary geometries, with any desired accuracy, that can directly exploit the efficiency of standard numerical-electromagnetism techniques. Using the simplest possible finite-difference implementation of this approach, we obtain both agreement with past results for cylinder-plate geometries, and also present results for new geometries. In part…
▽ More
We present a method of computing Casimir forces for arbitrary geometries, with any desired accuracy, that can directly exploit the efficiency of standard numerical-electromagnetism techniques. Using the simplest possible finite-difference implementation of this approach, we obtain both agreement with past results for cylinder-plate geometries, and also present results for new geometries. In particular, we examine a piston-like problem involving two dielectric and metallic squares sliding between two metallic walls, in two and three dimensions, respectively, and demonstrate non-additive and non-monotonic changes in the force due to these lateral walls.
△ Less
Submitted 9 August, 2007; v1 submitted 14 April, 2007;
originally announced April 2007.
-
Environment influence on the IR fluorescence of Xe$_{2}^{*}$ molecules in electron beam excited Ar--Xe mixture at high density
Authors:
A. F. Borghesani,
G. Carugno,
D. Iannuzzi,
I. Mogentale
Abstract:
We report new measurements of the near infrared (NIR) Xe$_2^*$ excimer fluorescence in an electron--beam--excited Ar (90%)--Xe (10 %) mixture at room temperature. Previous measurements up to a density $N\approx 2\times 10^{26}$ m$^{-3}$ discovered a broad excimer fluorescence band at $\approx 7800$ cm$^{-1},$ whose center is red--shifted by increasing $N$ (A. F. Borghesani, G. Bressi, G. Carugno…
▽ More
We report new measurements of the near infrared (NIR) Xe$_2^*$ excimer fluorescence in an electron--beam--excited Ar (90%)--Xe (10 %) mixture at room temperature. Previous measurements up to a density $N\approx 2\times 10^{26}$ m$^{-3}$ discovered a broad excimer fluorescence band at $\approx 7800$ cm$^{-1},$ whose center is red--shifted by increasing $N$ (A. F. Borghesani, G. Bressi, G. Carugno, E. Conti, and D. Iannuzzi, {\em J. Chem. Phys.}, {\bf 115}, 6042 (2001)). The shift has been explained by assuming that the energy of the optical active electron in the molecule is shifted by the density--dependent Fermi shift and by accounting for the solvation effect due to the environment. We have extended the density range up to $N\approx 6\times 10^{26}$ m$^{-3}, $ confirming the previous measurements and extending the validity of the interpretative model. A detailed analysis of the width of the fluorescence band gives a value of 2.85 nm for the size of the investigated excimer state. Such a large value lends credence to the validity of the proposed explanation of the experimental findings.
△ Less
Submitted 30 March, 2005;
originally announced March 2005.
-
Observation of the skin-depth effect on the Casimir force between metallic surfaces
Authors:
Mariangela Lisanti,
Davide Iannuzzi,
Federico Capasso
Abstract:
We have performed comparative measurements of the Casimir force between a metallic plate and a transparent sphere coated with metallic films of different thicknesses. We have observed that, if the thickness of the coating is less than the skin-depth of the electromagnetic modes that mostly contribute to the interaction, the force is significantly smaller than that measured with a thick bulk-like…
▽ More
We have performed comparative measurements of the Casimir force between a metallic plate and a transparent sphere coated with metallic films of different thicknesses. We have observed that, if the thickness of the coating is less than the skin-depth of the electromagnetic modes that mostly contribute to the interaction, the force is significantly smaller than that measured with a thick bulk-like film. Our results provide the first direct evidence of the skin-depth effect on the Casimir force between metallic surfaces.
△ Less
Submitted 20 February, 2005;
originally announced February 2005.
-
On the torque on birefringent plates induced by quantum fluctuations
Authors:
Davide Iannuzzi,
Jeremy N. Munday,
Yuri Barash,
Federico Capasso
Abstract:
We present detailed numerical calculations of the mechanical torque induced by quantum fluctuations on two parallel birefringent plates with in plane optical anisotropy, separated by either vacuum or a liquid (ethanol). The torque is found to vary as $\sin(2θ)$, where $θ$ represents the angle between the two optical axes, and its magnitude rapidly increases with decreasing plate separation $d$.…
▽ More
We present detailed numerical calculations of the mechanical torque induced by quantum fluctuations on two parallel birefringent plates with in plane optical anisotropy, separated by either vacuum or a liquid (ethanol). The torque is found to vary as $\sin(2θ)$, where $θ$ represents the angle between the two optical axes, and its magnitude rapidly increases with decreasing plate separation $d$. For a 40 $μ$m diameter disk, made out of either quartz or calcite, kept parallel to a Barium Titanate plate at $d\simeq 100$ nm, the maximum torque (at $θ={π\over 4}$) is of the order of $\simeq 10^{-19}$ N$\cdot$m. We propose an experiment to observe this torque when the Barium Titanate plate is immersed in ethanol and the other birefringent disk is placed on top of it. In this case the retarded van der Waals (or Casimir-Lifshitz) force between the two birefringent slabs is repulsive. The disk would float parallel to the plate at a distance where its net weight is counterbalanced by the retarded van der Waals repulsion, free to rotate in response to very small driving torques.
△ Less
Submitted 18 October, 2004;
originally announced October 2004.
-
Effect of hydrogen-switchable mirrors on the Casimir force
Authors:
Davide Iannuzzi,
Mariangela Lisanti,
Federico Capasso
Abstract:
We present systematic measurements of the Casimir force between a gold-coated plate and a sphere coated with a Hydrogen Switchable Mirror (HSM). HSMs are shiny metals that can become transparent by hydrogenation. In spite of such a dramatic change of the optical properties of the sphere, we did not observe any significant decrease of the Casimir force after filling the experimental apparatus wit…
▽ More
We present systematic measurements of the Casimir force between a gold-coated plate and a sphere coated with a Hydrogen Switchable Mirror (HSM). HSMs are shiny metals that can become transparent by hydrogenation. In spite of such a dramatic change of the optical properties of the sphere, we did not observe any significant decrease of the Casimir force after filling the experimental apparatus with hydrogen. This counterintuitive result can be explained by the Lifshitz theory that describes the Casimir attraction between metallic and dielectric materials.
△ Less
Submitted 19 March, 2004;
originally announced March 2004.
-
New Challenges and Directions in Casimir Force Experiments
Authors:
Davide Iannuzzi,
Ian Gelfand,
Mariangela Lisanti,
Federico Capasso
Abstract:
This article is divided in three sections. In the first section we briefly review some high precision experiments on the Casimir force, underlying an important aspect of the analysis of the data. In the second section we discuss our recent results in the measurement of the Casimir force using non-trivial materials. In the third section we present some original ideas for experiments on new phenom…
▽ More
This article is divided in three sections. In the first section we briefly review some high precision experiments on the Casimir force, underlying an important aspect of the analysis of the data. In the second section we discuss our recent results in the measurement of the Casimir force using non-trivial materials. In the third section we present some original ideas for experiments on new phenomena related to the Casimir effects.
△ Less
Submitted 4 December, 2003;
originally announced December 2003.
-
Comment on Repulsive Casimir Forces
Authors:
D. Iannuzzi,
F. Capasso
Abstract:
A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS…
▽ More
A recent theoretical calculation shows that the Casimir force between two parallel plates can be repulsive for plates with nontrivial magnetic properties (O. Kenneth et al., Phys. Rev. Lett. 89, 033001 (2002)). According to the authors, the effect may be observed with known materials, such as ferrites and garnets, and it might be possible to engineer micro- or nanoelectromechanical systems (MEMS or NEMS) that could take advantage of a short range repulsive force. Here we show that on the contrary the Casimir force between two parallel plates in vacuum at micron and submicron distance is always attractive.
△ Less
Submitted 12 May, 2003;
originally announced May 2003.
-
Infrared Fluorescence of Xe2 Molecules in beam-excited Xe Gas at high Pressure
Authors:
A. F. Borghesani,
G. Bressi,
G. Carugno,
E. Conti,
D. Iannuzzi
Abstract:
We report experimental results of proton- and electron-beam-induced near-infrared (NIR) fluorescence in high-pressure Xe gas at room temperature. The investigated wavelength band spans the range $0.7 \leqλ\leq 1.8 μ{m}.$ In the previously unexplored range for $λ> 1.05 μ{m}$ we have detected a broad continuum NIR fluorescence at $λ\approx 1.3 μ{m}$ that shifts towards longer wavelengths as pressu…
▽ More
We report experimental results of proton- and electron-beam-induced near-infrared (NIR) fluorescence in high-pressure Xe gas at room temperature. The investigated wavelength band spans the range $0.7 \leqλ\leq 1.8 μ{m}.$ In the previously unexplored range for $λ> 1.05 μ{m}$ we have detected a broad continuum NIR fluorescence at $λ\approx 1.3 μ{m}$ that shifts towards longer wavelengths as pressure is increased up to $1.5 {MPa}.$ We believe that this continuum is produced in a way similar to the VUV continua of noble gas excimers and that the pressure-dependent shift can be explained by the interaction of the outer electron of the excimer with the gas.
△ Less
Submitted 15 November, 2000;
originally announced November 2000.
