-
NeRF Solves Undersampled MRI Reconstruction
Authors:
Tae Jun Jang,
Chang Min Hyun
Abstract:
This article presents a novel undersampled magnetic resonance imaging (MRI) technique that leverages the concept of Neural Radiance Field (NeRF). With radial undersampling, the corresponding imaging problem can be reformulated into an image modeling task from sparse-view rendered data; therefore, a high dimensional MR image is obtainable from undersampled k-space data by taking advantage of implic…
▽ More
This article presents a novel undersampled magnetic resonance imaging (MRI) technique that leverages the concept of Neural Radiance Field (NeRF). With radial undersampling, the corresponding imaging problem can be reformulated into an image modeling task from sparse-view rendered data; therefore, a high dimensional MR image is obtainable from undersampled k-space data by taking advantage of implicit neural representation. A multi-layer perceptron, which is designed to output an image intensity from a spatial coordinate, learns the MR physics-driven rendering relation between given measurement data and desired image. Effective undersampling strategies for high-quality neural representation are investigated. The proposed method serves two benefits: (i) The learning is based fully on single undersampled k-space data, not a bunch of measured data and target image sets. It can be used potentially for diagnostic MR imaging, such as fetal MRI, where data acquisition is relatively rare or limited against diversity of clinical images while undersampled reconstruction is highly demanded. (ii) A reconstructed MR image is a scan-specific representation highly adaptive to the given k-space measurement. Numerous experiments validate the feasibility and capability of the proposed approach.
△ Less
Submitted 2 March, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
TREASUREHUNT: Transients and Variability Discovered with HST in the JWST North Ecliptic Pole Time Domain Field
Authors:
Rosalia O'Brien,
Rolf A. Jansen,
Norman A. Grogin,
Seth H. Cohen,
Brent M. Smith,
Ross M. Silver,
W. P. Maksym III,
Rogier A. Windhorst,
Timothy Carleton,
Anton M. Koekemoer,
Nimish P. Hathi,
Christopher N. A. Willmer,
Brenda L. Frye,
M. Alpaslan,
M. L. N. Ashby,
T. A. Ashcraft,
S. Bonoli,
W. Brisken,
N. Cappelluti,
F. Civano,
C. J. Conselice,
V. S. Dhillon,
S. P. Driver,
K. J. Duncan,
R. Dupke
, et al. (34 additional authors not shown)
Abstract:
The JWST North Ecliptic Pole (NEP) Time Domain Field (TDF) is a $>$14 arcmin diameter field optimized for multi-wavelength time-domain science with JWST. It has been observed across the electromagnetic spectrum both from the ground and from space, including with the Hubble Space Telescope (HST). As part of HST observations over 3 cycles (the "TREASUREHUNT" program), deep images were obtained with…
▽ More
The JWST North Ecliptic Pole (NEP) Time Domain Field (TDF) is a $>$14 arcmin diameter field optimized for multi-wavelength time-domain science with JWST. It has been observed across the electromagnetic spectrum both from the ground and from space, including with the Hubble Space Telescope (HST). As part of HST observations over 3 cycles (the "TREASUREHUNT" program), deep images were obtained with ACS/WFC in F435W and F606W that cover almost the entire JWST NEP TDF. Many of the individual pointings of these programs partially overlap, allowing an initial assessment of the potential of this field for time-domain science with HST and JWST. The cumulative area of overlap** pointings is ~88 arcmin$^2$, with time intervals between individual epochs that range between 1 day and 4$+$ years. To a depth of $m_{AB}$ $\simeq$ 29.5 mag (F606W), we present the discovery of 12 transients and 190 variable candidates. For the variable candidates, we demonstrate that Gaussian statistics are applicable, and estimate that ~80 are false positives. The majority of the transients will be supernovae, although at least two are likely quasars. Most variable candidates are AGN, where we find 0.42% of the general $z$ $<$ 6 field galaxy population to vary at the $~3σ$ level. Based on a 5-year timeframe, this translates into a random supernova areal density of up to ~0.07 transients per arcmin$^2$ (~245 deg$^{-2}$) per epoch, and a variable AGN areal density of ~1.25 variables per arcmin$^2$ (~4500 deg$^{-2}$) to these depths.
△ Less
Submitted 2 May, 2024; v1 submitted 10 January, 2024;
originally announced January 2024.
-
Contact holes in vertical electrode structures analyzed by voltage contrast-SEM and conducting AFM
Authors:
Minsun Gu,
Moon Seop Hyun,
Moonsup Han,
Gyungtae Kim,
Young Jun Chang
Abstract:
Soaring demands of multi-stacked memory devices request urgent development of backside contact electrode technologies, such as high aspect ratio etching, metallization, and inspection methods. Especially the complex metal contact process should be monitored for each manufacturing step to filter the defective samples and to maintain the high yield of production. Among the inspection methods for det…
▽ More
Soaring demands of multi-stacked memory devices request urgent development of backside contact electrode technologies, such as high aspect ratio etching, metallization, and inspection methods. Especially the complex metal contact process should be monitored for each manufacturing step to filter the defective samples and to maintain the high yield of production. Among the inspection methods for detecting the electrical connections, there is voltage contrast (VC)-SEM and conducting AFM (C-AFM). In this report, we investigated the two inspection methods for testing designed samples with different contact hole states. The VC-SEM data shows the contrast variation at the contact holes, from which one may discern the contact status with an optimum voltage. The C-AFM results clearly demonstrate a finite electrical current in the connected contact, while a negligible current in the disconnected one. Finally, we discuss insights of using the two methods for analyzing the contact hole technologies with high aspect ratios.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
PEARLS: JWST counterparts of micro-Jy radio sources in the Time Domain Field
Authors:
S. P. Willner,
H. B. Gim,
M. del Carmen Polletta,
S. H. Cohen,
C. N. A. Willmer,
X. Zhao,
J. C. J. D'Silva,
R. A. Jansen,
A. M. Koekemoer,
J. Summers,
R. A. Windhorst,
D. Coe,
C. J. Conselice,
S. P. Driver,
B. Frye,
N. A. Grogin,
M. A. Marshall,
M. Nonino,
R. Ortiz III,
N. Pirzkal,
A. Robotham,
M. J. Rutkowski,
R. E. Ryan, Jr.,
S. Tompkins,
H. Yan
, et al. (16 additional authors not shown)
Abstract:
The Time Domain Field (TDF) near the North Ecliptic Pole in JWST's continuous-viewing zone will become a premier "blank field" for extragalactic science. JWST/NIRCam data in a 16 arcmin$^2$ portion of the TDF identify 4.4 $μ$m counterparts for 62 of 63 3 GHz sources with S(3 GHz) > 5 μJy. The one unidentified radio source may be a lobe of a nearby Seyfert galaxy, or it may be an infrared-faint rad…
▽ More
The Time Domain Field (TDF) near the North Ecliptic Pole in JWST's continuous-viewing zone will become a premier "blank field" for extragalactic science. JWST/NIRCam data in a 16 arcmin$^2$ portion of the TDF identify 4.4 $μ$m counterparts for 62 of 63 3 GHz sources with S(3 GHz) > 5 μJy. The one unidentified radio source may be a lobe of a nearby Seyfert galaxy, or it may be an infrared-faint radio source. The bulk properties of the radio-host galaxies are consistent with those found by previous work: redshifts range from 0.14 to 4.4 with a median redshift of 1.33. The radio emission arises primarily from star formation in $\sim 2/3$ of the sample and from an active galactic nucleus in $\sim 1/3$, but just over half the sample shows evidence for an AGN either in the spectral energy distribution or by radio excess. All but three counterparts are brighter than magnitude 23 AB at 4.4 $μ$m, and the exquisite resolution of JWST identifies correct counterparts for sources for which observations with lower angular resolution would mis-identify a nearby bright source as the counterpart when the correct one is faint and red. Up to 11% of counterparts might have been unidentified or misidentified absent NIRCam observations.
△ Less
Submitted 26 September, 2023; v1 submitted 22 September, 2023;
originally announced September 2023.
-
PEARLS: Near Infrared Photometry in the JWST North Ecliptic Pole Time Domain Field
Authors:
Christopher N. A. Willmer,
Chun Ly,
Satoshi Kikuta,
S. A. Kattner,
Rolf A. Jansen,
Seth H. Cohen,
Rogier A. Windhorst,
Ian Smail,
Scott Tompkins,
John F. Beacom,
Cheng Cheng,
Christopher J. Conselice,
Brenda L. Frye,
Anton M. Koekemoer,
Nimish Hathi,
Minhee Hyun,
Myungshin Im,
S. P. Willner,
X. Zhao,
Walter A. Brisken,
F. Civano,
William Cotton,
Guenther Hasinger,
W. Peter Maksym,
Marcia J. Rieke
, et al. (1 additional authors not shown)
Abstract:
We present Near-Infrared (NIR) ground-based Y, J, H, and K imaging obtained in the James Webb Space Telescope North Ecliptic Pole Time Domain Field (TDF) using the MMT-Magellan Infrared Imager and Spectrometer (MMIRS) on the MMT.These new observations cover a field of approximately 230 arcmin^2 in Y, H, and K and 313 arcmin^2 in J. Using Monte Carlo simulations we estimate a 1 sigma depth relative…
▽ More
We present Near-Infrared (NIR) ground-based Y, J, H, and K imaging obtained in the James Webb Space Telescope North Ecliptic Pole Time Domain Field (TDF) using the MMT-Magellan Infrared Imager and Spectrometer (MMIRS) on the MMT.These new observations cover a field of approximately 230 arcmin^2 in Y, H, and K and 313 arcmin^2 in J. Using Monte Carlo simulations we estimate a 1 sigma depth relative to the background sky of (Y, J, H, K}) = (23.80, 23.53, 23.13, 23.28) in AB magnitudes for point sources at a 95% completeness level. These observations are part of the ground-based effort to characterize this region of the sky, supplementing space-based data obtained with Chandra, NuSTAR, XMM, AstroSat, HST, and JWST. This paper describes the observations and reduction of the NIR imaging and combines these NIR data with archival imaging in the visible, obtained with the Subaru Hyper-Suprime-Cam, to produce a merged catalog of 57,501 sources. The new observations reported here, plus the corresponding multi-wavelength catalog, will provide a baseline for time-domain studies of bright sources in the TDF.
△ Less
Submitted 5 September, 2023; v1 submitted 31 August, 2023;
originally announced September 2023.
-
Automatic 3D Registration of Dental CBCT and Face Scan Data using 2D Projection Images
Authors:
Hyoung Suk Park,
Chang Min Hyun,
Sang-Hwy Lee,
** Keun Seo,
Kiwan Jeon
Abstract:
This paper presents a fully automatic registration method of dental cone-beam computed tomography (CBCT) and face scan data. It can be used for a digital platform of 3D jaw-teeth-face models in a variety of applications, including 3D digital treatment planning and orthognathic surgery. Difficulties in accurately merging facial scans and CBCT images are due to the different image acquisition method…
▽ More
This paper presents a fully automatic registration method of dental cone-beam computed tomography (CBCT) and face scan data. It can be used for a digital platform of 3D jaw-teeth-face models in a variety of applications, including 3D digital treatment planning and orthognathic surgery. Difficulties in accurately merging facial scans and CBCT images are due to the different image acquisition methods and limited area of correspondence between the two facial surfaces. In addition, it is difficult to use machine learning techniques because they use face-related 3D medical data with radiation exposure, which are difficult to obtain for training. The proposed method addresses these problems by reusing an existing machine-learning-based 2D landmark detection algorithm in an open-source library and develo** a novel mathematical algorithm that identifies paired 3D landmarks from knowledge of the corresponding 2D landmarks. A main contribution of this study is that the proposed method does not require annotated training data of facial landmarks because it uses a pre-trained facial landmark detection algorithm that is known to be robust and generalized to various 2D face image models. Note that this reduces a 3D landmark detection problem to a 2D problem of identifying the corresponding landmarks on two 2D projection images generated from two different projection angles. Here, the 3D landmarks for registration were selected from the sub-surfaces with the least geometric change under the CBCT and face scan environments. For the final fine-tuning of the registration, the Iterative Closest Point method was applied, which utilizes geometrical information around the 3D landmarks. The experimental results show that the proposed method achieved an averaged surface distance error of 0.74 mm for three pairs of CBCT and face scan datasets.
△ Less
Submitted 26 July, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Unsupervised sequence-to-sequence learning for automatic signal quality assessment in multi-channel electrical impedance-based hemodynamic monitoring
Authors:
Chang Min Hyun,
Tae-Geun Kim,
Kyounghun Lee
Abstract:
This study proposes an unsupervised sequence-to-sequence learning approach that automatically assesses the motion-induced reliability degradation of the cardiac volume signal (CVS) in multi-channel electrical impedance-based hemodynamic monitoring. The proposed method attempts to tackle shortcomings in existing learning-based assessment approaches, such as the requirement of manual annotation for…
▽ More
This study proposes an unsupervised sequence-to-sequence learning approach that automatically assesses the motion-induced reliability degradation of the cardiac volume signal (CVS) in multi-channel electrical impedance-based hemodynamic monitoring. The proposed method attempts to tackle shortcomings in existing learning-based assessment approaches, such as the requirement of manual annotation for motion influence and the lack of explicit mechanisms for realizing motion-induced abnormalities under contextual variations in CVS over time. By utilizing long-short term memory and variational auto-encoder structures, an encoder--decoder model is trained not only to self-reproduce an input sequence of the CVS but also to extrapolate the future in a parallel fashion. By doing so, the model can capture contextual knowledge lying in a temporal CVS sequence while being regularized to explore a general relationship over the entire time-series. A motion-influenced CVS of low-quality is detected, based on the residual between the input sequence and its neural representation with a cut--off value determined from the two-sigma rule of thumb over the training set. Our experimental observations validated two claims: (i) in the learning environment of label-absence, assessment performance is achievable at a competitive level to the supervised setting, and (ii) the contextual information across a time series of CVS is advantageous for effectively realizing motion-induced unrealistic distortions in signal amplitude and morphology. We also investigated the capability as a pseudo-labeling tool to minimize human-craft annotation by preemptively providing strong candidates for motion-induced anomalies. Empirical evidence has shown that machine-guided annotation can reduce inevitable human-errors during manual assessment while minimizing cumbersome and time-consuming processes.
△ Less
Submitted 17 May, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
Nonlinear ill-posed problem in low-dose dental cone-beam computed tomography
Authors:
Hyoung Suk Park,
Chang Min Hyun,
** Keun Seo
Abstract:
This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard comput…
▽ More
This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations of existing methods in the accurate restoration of the morphological structures of teeth using dental CBCT data severely damaged by metal implants. We further discuss the usefulness of panoramic images generated from CBCT data for accurate tooth segmentation. We also discuss the possibility of utilizing radiation-free intra-oral scan data as prior information in CBCT image reconstruction to compensate for the damage to data caused by metal implants.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
The JCMT SCUBA-2 Survey of the James Webb Space Telescope North Ecliptic Pole Time-Domain Field
Authors:
Minhee Hyun,
Myungshin Im,
Ian R. Smail,
William D. Cotton,
Jack E. Birkin,
Satoshi Kikuta,
Hyun** Shim,
Christopher N. A. Willmer,
James J. Condon,
Rogier A. Windhorst,
Seth H. Cohen,
Rolf A. Jansen,
Chun Ly,
Yuichi Matsuda,
Giovanni G. Fazio,
A. M. Swinbank,
Hao**g Yan
Abstract:
The James Webb Space Telescope Time-Domain Field (JWST-TDF) is an $\sim$14$'$ diameter field near the North Ecliptic Pole that will be targeted by one of the JWST Guaranteed Time Observations programs. Here, we describe our James Clerk Maxwell Telescope SCUBA-2 850 $μ$m imaging of the JWST-TDF and present the submillimeter source catalog and properties. We also present a catalog of radio sources f…
▽ More
The James Webb Space Telescope Time-Domain Field (JWST-TDF) is an $\sim$14$'$ diameter field near the North Ecliptic Pole that will be targeted by one of the JWST Guaranteed Time Observations programs. Here, we describe our James Clerk Maxwell Telescope SCUBA-2 850 $μ$m imaging of the JWST-TDF and present the submillimeter source catalog and properties. We also present a catalog of radio sources from Karl J. Jansky Very Large Array 3 GHz observations of the field. These observations were obtained to aid JWST's study of the dust-obscured galaxies that contribute significantly to the cosmic star formation at high redshifts. Our deep 850 $μ$m map covers the JWST TDF at a noise level of $σ_{850}$ = 1.0 mJy beam$^{-1}$, detecting 83/31 sources in the main/supplementary signal-to-noise ratio (S/N $>$ 4 / S/N = 3.5 - 4) sample respectively. The 3 GHz observations cover a 24$'$ diameter field with a 1 $σ$ noise of 1$μ$Jy beam$^{-1}$ at a 0$.\!\!^{\prime\prime}$7 FWHM. We identified eighty-five 3 GHz counterparts to sixty-six 850 $μ$m sources and then matched these with multiwavelength data from the optical to the mid-infrared wave bands. We performed spectral energy distribution fitting for 61 submillimeter galaxies (SMGs) matched with optical/near-infrared data, and found that SMGs at S/N $>$ 4 have a median value of $z_{phot} = $2.22 $\pm$ 0.12, star formation rates of 300 $\pm$ 40 M$_{\odot}\,{\rm yr^{-1}}$ (Chabrier initial mass function), and typical cold dust masses of 5.9 $\pm$ 0.7 $ \times$ 10$^{8} $M$_{\odot}$, in line with bright SMGs from other surveys. The large cold dust masses indicate correspondingly large cool gas masses, which we suggest are a key factor necessary to drive the high star formation rates seen in this population
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Machine Learning-based Signal Quality Assessment for Cardiac Volume Monitoring in Electrical Impedance Tomography
Authors:
Chang Min Hyun,
Tae Jun Jang,
Jeongchan Nam,
Hyeuknam Kwon,
Kiwan Jeon,
Kyunghun Lee
Abstract:
Owing to recent advances in thoracic electrical impedance tomography, a patient's hemodynamic function can be noninvasively and continuously estimated in real-time by surveilling a cardiac volume signal associated with stroke volume and cardiac output. In clinical applications, however, a cardiac volume signal is often of low quality, mainly because of the patient's deliberate movements or inevita…
▽ More
Owing to recent advances in thoracic electrical impedance tomography, a patient's hemodynamic function can be noninvasively and continuously estimated in real-time by surveilling a cardiac volume signal associated with stroke volume and cardiac output. In clinical applications, however, a cardiac volume signal is often of low quality, mainly because of the patient's deliberate movements or inevitable motions during clinical interventions. This study aims to develop a signal quality indexing method that assesses the influence of motion artifacts on transient cardiac volume signals. The assessment is performed on each cardiac cycle to take advantage of the periodicity and regularity in cardiac volume changes. Time intervals are identified using the synchronized electrocardiography system. We apply divergent machine-learning methods, which can be sorted into discriminative-model and manifold-learning approaches. The use of machine-learning could be suitable for our real-time monitoring application that requires fast inference and automation as well as high accuracy. In the clinical environment, the proposed method can be utilized to provide immediate warnings so that clinicians can minimize confusion regarding patients' conditions, reduce clinical resource utilization, and improve the confidence level of the monitoring system. Numerous experiments using actual EIT data validate the capability of cardiac volume signals degraded by motion artifacts to be accurately and automatically assessed in real-time by machine learning. The best model achieved an accuracy of 0.95, positive and negative predictive values of 0.96 and 0.86, sensitivity of 0.98, specificity of 0.77, and AUC of 0.96.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
JWST's PEARLS: Prime Extragalactic Areas for Reionization and Lensing Science: Project Overview and First Results
Authors:
Rogier A. Windhorst,
Seth H. Cohen,
Rolf A. Jansen,
Jake Summers,
Scott Tompkins,
Christopher J. Conselice,
Simon P. Driver,
Hao**g Yan,
Dan Coe,
Brenda Frye,
Norman Grogin,
Anton Koekemoer,
Madeline A. Marshall,
Rosalia O'Brien,
Nor Pirzkal,
Aaron Robotham,
Russell E. Ryan, Jr.,
Christopher N. A. Willmer,
Timothy Carleton,
Jose M. Diego,
William C. Keel,
Paolo Porto,
Caleb Redshaw,
Sydney Scheller,
Stephen M. Wilkins
, et al. (60 additional authors not shown)
Abstract:
We give an overview and describe the rationale, methods, and first results from NIRCam images of the JWST "Prime Extragalactic Areas for Reionization and Lensing Science" ("PEARLS") project. PEARLS uses up to eight NIRCam filters to survey several prime extragalactic survey areas: two fields at the North Ecliptic Pole (NEP); seven gravitationally lensing clusters; two high redshift proto-clusters;…
▽ More
We give an overview and describe the rationale, methods, and first results from NIRCam images of the JWST "Prime Extragalactic Areas for Reionization and Lensing Science" ("PEARLS") project. PEARLS uses up to eight NIRCam filters to survey several prime extragalactic survey areas: two fields at the North Ecliptic Pole (NEP); seven gravitationally lensing clusters; two high redshift proto-clusters; and the iconic backlit VV 191 galaxy system to map its dust attenuation. PEARLS also includes NIRISS spectra for one of the NEP fields and NIRSpec spectra of two high-redshift quasars. The main goal of PEARLS is to study the epoch of galaxy assembly, AGN growth, and First Light. Five fields, the JWST NEP Time-Domain Field (TDF), IRAC Dark Field (IDF), and three lensing clusters, will be observed in up to four epochs over a year. The cadence and sensitivity of the imaging data are ideally suited to find faint variable objects such as weak AGN, high-redshift supernovae, and cluster caustic transits. Both NEP fields have sightlines through our Galaxy, providing significant numbers of very faint brown dwarfs whose proper motions can be studied. Observations from the first spoke in the NEP TDF are public. This paper presents our first PEARLS observations, their NIRCam data reduction and analysis, our first object catalogs, the 0.9-4.5 $μ$m galaxy counts and Integrated Galaxy Light. We assess the JWST sky brightness in 13 NIRCam filters, yielding our first constraints to diffuse light at 0.9-4.5 μm. PEARLS is designed to be of lasting benefit to the community.
△ Less
Submitted 28 November, 2022; v1 submitted 9 September, 2022;
originally announced September 2022.
-
The Infrared Medium-deep Survey. IX. Discovery of Two New $z\sim6$ Quasars and Space Density down to $M_{1450}\sim-23.5$ mag
Authors:
Yongjung Kim,
Myungshin Im,
Yiseul Jeon,
Min** Kim,
Linhua Jiang,
Suhyun Shin,
Changsu Choi,
Minhee Hyun,
Hyunsung D. Jun,
Dohyeong Kim,
Duho Kim,
Jae-Woo Kim,
Ji Hoon Kim,
Bumhyun Lee,
Seong-Kook Lee,
Juan Molina,
Soojong Pak,
Won-Kee Park,
Yoon Chan Taak,
Yongmin Yoon
Abstract:
We present the result of the Infrared Medium-deep Survey (IMS) $z\sim6$ quasar survey, using the combination of the IMS near-infrared images and the Canada-France-Hawaii Telescope Legacy Survey (CFHTLS) optical images. The traditional color-selection method results in 25 quasar candidates over $86$ deg$^{2}$. We introduce the corrected Akaike Information Criterion (AICc) with the high-redshift qua…
▽ More
We present the result of the Infrared Medium-deep Survey (IMS) $z\sim6$ quasar survey, using the combination of the IMS near-infrared images and the Canada-France-Hawaii Telescope Legacy Survey (CFHTLS) optical images. The traditional color-selection method results in 25 quasar candidates over $86$ deg$^{2}$. We introduce the corrected Akaike Information Criterion (AICc) with the high-redshift quasar and late-type star models to prioritize the candidates efficiently. Among the color-selected candidates, seven plausible candidates finally passed the AICc selection of which three are known quasars at $z\sim6$. The follow-up spectroscopic observations for the remaining four candidates were carried out, and we confirmed that two out of four are $z\sim6$ quasars. With this complete sample, we revisited the quasar space density at $z\sim6$ down to $M_{1450}\sim-23.5$ mag. Our result supports the low quasar space density at the luminosity where the quasar's ultraviolet ionizing emissivity peaks, favoring a minor contribution of quasars to the cosmic reionization.
△ Less
Submitted 27 July, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
High-$z$ Universe probed via Lensing by QSOs (HULQ) II. Deep GMOS spectroscopy of a QSO lens candidate
Authors:
Yoon Chan Taak,
Myungshin Im,
Yongjung Kim,
Minhee Hyun,
Insu Paek
Abstract:
Galaxies and their central supermassive black holes are known to coevolve, but the physical background for this is unknown as of yet. The High-$z$ Universe probed via Lensing by QSOs (HULQ) project aims to investigate this coevolution by using quasi-stellar object (QSO) host galaxies acting as gravitational lenses (QSO lenses). We present the results of the spectroscopic observation of the first Q…
▽ More
Galaxies and their central supermassive black holes are known to coevolve, but the physical background for this is unknown as of yet. The High-$z$ Universe probed via Lensing by QSOs (HULQ) project aims to investigate this coevolution by using quasi-stellar object (QSO) host galaxies acting as gravitational lenses (QSO lenses). We present the results of the spectroscopic observation of the first QSO lens candidate from the HULQ project, HULQ J0002+0239, which consists of a QSO host galaxy at $z_{\rm d} = 1.455$ and four seemingly lensed objects in a cross-like configuration. Deep optical spectra of two of the possibly lensed objects with $z \sim 24.5$ mag were obtained with the Gemini Multi-Object Spectrograph on the Gemini North Telescope. Their spectra reveal that the objects are newly discovered galaxies at $z=0.29$ and $z=1.11$, and we conclude that HULQ J0002+0239 is not a QSO lens. Our QSO lens search results are so far in agreement with the predicted number of QSO lenses, and we discuss how the future investigation of additional QSO lens candidates could tell us more about the evolution of the black hole mass and host galaxy scaling relations.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Metal Artifact Reduction with Intra-Oral Scan Data for 3D Low Dose Maxillofacial CBCT Modeling
Authors:
Chang Min Hyun,
Taigyntuya Bayaraa,
Hye Sun Yun,
Tae Jun Jang,
Hyoung Suk Park,
** Keun Seo
Abstract:
Low-dose dental cone beam computed tomography (CBCT) has been increasingly used for maxillofacial modeling. However, the presence of metallic inserts, such as implants, crowns, and dental filling, causes severe streaking and shading artifacts in a CBCT image and loss of the morphological structures of the teeth, which consequently prevents accurate segmentation of bones. A two-stage metal artifact…
▽ More
Low-dose dental cone beam computed tomography (CBCT) has been increasingly used for maxillofacial modeling. However, the presence of metallic inserts, such as implants, crowns, and dental filling, causes severe streaking and shading artifacts in a CBCT image and loss of the morphological structures of the teeth, which consequently prevents accurate segmentation of bones. A two-stage metal artifact reduction method is proposed for accurate 3D low-dose maxillofacial CBCT modeling, where a key idea is to utilize explicit tooth shape prior information from intra-oral scan data whose acquisition does not require any extra radiation exposure. In the first stage, an image-to-image deep learning network is employed to mitigate metal-related artifacts. To improve the learning ability, the proposed network is designed to take advantage of the intra-oral scan data as side-inputs and perform multi-task learning of auxiliary tooth segmentation. In the second stage, a 3D maxillofacial model is constructed by segmenting the bones from the dental CBCT image corrected in the first stage. For accurate bone segmentation, weighted thresholding is applied, wherein the weighting region is determined depending on the geometry of the intra-oral scan data. Because acquiring a paired training dataset of metal-artifact-free and metal artifact-affected dental CBCT images is challenging in clinical practice, an automatic method of generating a realistic dataset according to the CBCT physics model is introduced. Numerical simulations and clinical experiments show the feasibility of the proposed method, which takes advantage of tooth surface information from intra-oral scan data in 3D low dose maxillofacial CBCT modeling.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Fully automatic integration of dental CBCT images and full-arch intraoral impressions with stitching error correction via individual tooth segmentation and identification
Authors:
Tae Jun Jang,
Hye Sun Yun,
Chang Min Hyun,
Jong-Eun Kim,
Sang-Hwy Lee,
** Keun Seo
Abstract:
We present a fully automated method of integrating intraoral scan (IOS) and dental cone-beam computerized tomography (CBCT) images into one image by complementing each image's weaknesses. Dental CBCT alone may not be able to delineate precise details of the tooth surface due to limited image resolution and various CBCT artifacts, including metal-induced artifacts. IOS is very accurate for the scan…
▽ More
We present a fully automated method of integrating intraoral scan (IOS) and dental cone-beam computerized tomography (CBCT) images into one image by complementing each image's weaknesses. Dental CBCT alone may not be able to delineate precise details of the tooth surface due to limited image resolution and various CBCT artifacts, including metal-induced artifacts. IOS is very accurate for the scanning of narrow areas, but it produces cumulative stitching errors during full-arch scanning. The proposed method is intended not only to compensate the low-quality of CBCT-derived tooth surfaces with IOS, but also to correct the cumulative stitching errors of IOS across the entire dental arch. Moreover, the integration provide both gingival structure of IOS and tooth roots of CBCT in one image. The proposed fully automated method consists of four parts; (i) individual tooth segmentation and identification module for IOS data (TSIM-IOS); (ii) individual tooth segmentation and identification module for CBCT data (TSIM-CBCT); (iii) global-to-local tooth registration between IOS and CBCT; and (iv) stitching error correction of full-arch IOS. The experimental results show that the proposed method achieved landmark and surface distance errors of 112.4 $μ$m and 301.7 $μ$m, respectively.
△ Less
Submitted 2 March, 2023; v1 submitted 3 December, 2021;
originally announced December 2021.
-
Feasibility trade-offs in decarbonisation of power sector with high coal dependence: A case of Korea
Authors:
Minwoo Hyun,
Aleh Cherp,
Jessica Jewell,
Yeong Jae Kim,
Jiyong Eom
Abstract:
Decarbonisation of the power sector requires feasible strategies for rapid phase-out of fossil fuels and expansion of low-carbon sources. This study develops and uses a model with an explicit account of power plant stocks to explore plausible decarbonization scenarios of the power sector in the Republic of Korea through 2050 and 2060. The results show that achieving zero emissions from the power s…
▽ More
Decarbonisation of the power sector requires feasible strategies for rapid phase-out of fossil fuels and expansion of low-carbon sources. This study develops and uses a model with an explicit account of power plant stocks to explore plausible decarbonization scenarios of the power sector in the Republic of Korea through 2050 and 2060. The results show that achieving zero emissions from the power sector by the mid-century requires either ambitious expansion of renewables backed by gas-fired generation equipped with carbon capture and storage or significant expansion of nuclear power. The first strategy implies replicating and maintaining for decades maximum growth rates of solar power achieved in leading countries and becoming an early and ambitious adopter of the CCS technology. The alternative expansion of nuclear power has historical precedents in Korea and other countries but may not be acceptable in the current political and regulatory environment.
△ Less
Submitted 25 October, 2021;
originally announced November 2021.
-
Automated 3D cephalometric landmark identification using computerized tomography
Authors:
Hye Sun Yun,
Chang Min Hyun,
Seong Hyeon Baek,
Sang-Hwy Lee,
** Keun Seo
Abstract:
Identification of 3D cephalometric landmarks that serve as proxy to the shape of human skull is the fundamental step in cephalometric analysis. Since manual landmarking from 3D computed tomography (CT) images is a cumbersome task even for the trained experts, automatic 3D landmark detection system is in a great need. Recently, automatic landmarking of 2D cephalograms using deep learning (DL) has a…
▽ More
Identification of 3D cephalometric landmarks that serve as proxy to the shape of human skull is the fundamental step in cephalometric analysis. Since manual landmarking from 3D computed tomography (CT) images is a cumbersome task even for the trained experts, automatic 3D landmark detection system is in a great need. Recently, automatic landmarking of 2D cephalograms using deep learning (DL) has achieved great success, but 3D landmarking for more than 80 landmarks has not yet reached a satisfactory level, because of the factors hindering machine learning such as the high dimensionality of the input data and limited amount of training data due to ethical restrictions on the use of medical data. This paper presents a semi-supervised DL method for 3D landmarking that takes advantage of anonymized landmark dataset with paired CT data being removed. The proposed method first detects a small number of easy-to-find reference landmarks, then uses them to provide a rough estimation of the entire landmarks by utilizing the low dimensional representation learned by variational autoencoder (VAE). Anonymized landmark dataset is used for training the VAE. Finally, coarse-to-fine detection is applied to the small bounding box provided by rough estimation, using separate strategies suitable for mandible and cranium. For mandibular landmarks, patch-based 3D CNN is applied to the segmented image of the mandible (separated from the maxilla), in order to capture 3D morphological features of mandible associated with the landmarks. We detect 6 landmarks around the condyle all at once, instead of one by one, because they are closely related to each other. For cranial landmarks, we again use VAE-based latent representation for more accurate annotation. In our experiment, the proposed method achieved an averaged 3D point-to-point error of 2.91 mm for 90 landmarks only with 15 paired training data.
△ Less
Submitted 16 December, 2020;
originally announced January 2021.
-
The Infrared Medium-deep Survey. VIII. Quasar Luminosity Function at $z\sim5$
Authors:
Yongjung Kim,
Myungshin Im,
Yiseul Jeon,
Min** Kim,
Soojong Pak,
Minhee Hyun,
Yoon Chan Taak,
Suhyun Shin,
Gu Lim,
Gregory S. H. Paek,
insu Paek,
Linhua Jiang,
Changsu Choi,
Jueun Hong,
Tae-Geun Ji,
Hyunsung D. Jun,
Marios Karouzos,
Dohyeong Kim,
Duho Kim,
Jae-woo Kim,
Ji Hoon Kim,
Hye-in Lee,
Seong-Kook Lee,
Won-Kee Park,
Yongmin Yoon
, et al. (5 additional authors not shown)
Abstract:
Faint $z\sim5$ quasars with $M_{1450}\sim-23$ mag are known to be the potentially important contributors to the ultraviolet ionizing background in the post-reionization era. However, their number density has not been well determined, making it difficult to assess their role in the early ionization of the intergalactic medium (IGM). In this work, we present the updated results of our $z\sim5$ quasa…
▽ More
Faint $z\sim5$ quasars with $M_{1450}\sim-23$ mag are known to be the potentially important contributors to the ultraviolet ionizing background in the post-reionization era. However, their number density has not been well determined, making it difficult to assess their role in the early ionization of the intergalactic medium (IGM). In this work, we present the updated results of our $z\sim5$ quasar survey using the Infrared Medium-deep Survey (IMS), a near-infrared imaging survey covering an area of 85 deg$^{2}$. From our spectroscopic observations with the Gemini Multi-Object Spectrograph (GMOS) on the Gemini-South 8 m Telescope, we discovered eight new quasars at $z\sim5$ with $-26.1\leq M_{1450} \leq -23.3$. Combining our IMS faint quasars ($M_{1450}>-27$ mag) with the brighter Sloan Digital Sky Survey (SDSS) quasars ($M_{1450}<-27$ mag), we derive the $z\sim5$ quasar luminosity function (QLF) without any fixed parameters down to the magnitude limit of $M_{1450}=-23$ mag. We find that the faint-end slope of the QLF is very flat ($α=-1.2^{+1.4}_{-0.6}$), with a characteristic luminosity of $M^{*}_{1450}=-25.8^{+1.4}_{-1.1}$ mag. The number density of $z\sim5$ quasars from the QLF gives an ionizing emissivity at 912 $\unicode{x212B}$ of $ε_{912}=(3.7$--$7.1)\times10^{23}$ erg s$^{-1}$ Hz$^{-1}$ Mpc$^{-3}$ and an ionizing photon density of $\dot{n}_{\rm ion}=(3.0$--$5.7)\times10^{49}$ Mpc$^{-3}$ s$^{-1}$. These results imply that quasars are responsible for only 10-20% (up to 50% even in the extreme case) of the photons required to completely ionize the IGM at $z\sim5$, disfavoring the idea that quasars alone could have ionized the IGM at $z\sim5$.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
A two-stage approach for beam hardening artifact reduction in low-dose dental CBCT
Authors:
T. Bayaraa,
C. M. Hyun,
T. J. Jang,
S. M. Lee,
J. K. Seo
Abstract:
This paper presents a two-stage method for beam hardening artifact correction of dental cone beam computerized tomography (CBCT). The proposed artifact reduction method is designed to improve the quality of maxillofacial imaging, where soft tissue details are not required. Compared to standard CT, the additional difficulty of dental CBCT comes from the problems caused by offset detector, FOV trunc…
▽ More
This paper presents a two-stage method for beam hardening artifact correction of dental cone beam computerized tomography (CBCT). The proposed artifact reduction method is designed to improve the quality of maxillofacial imaging, where soft tissue details are not required. Compared to standard CT, the additional difficulty of dental CBCT comes from the problems caused by offset detector, FOV truncation, and low signal-to-noise ratio due to low X-ray irradiation. To address these problems, the proposed method primarily performs a sinogram adjustment in the direction of enhancing data consistency, considering the situation according to the FOV truncation and offset detector. This sinogram correction algorithm significantly reduces beam hardening artifacts caused by high-density materials such as teeth, bones, and metal implants, while tending to amplify special types of noise. To suppress such noise, a deep convolutional neural network is complementarily used, where CT images adjusted by the sinogram correction are used as the input of the neural network. Numerous experiments validate that the proposed method successfully reduces beam hardening artifacts and, in particular, has the advantage of improving the image quality of teeth, associated with maxillofacial CBCT imaging.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Interpolation-based semi-supervised learning for object detection
Authors:
Jisoo Jeong,
Vikas Verma,
Minsung Hyun,
Juho Kannala,
Nojun Kwak
Abstract:
Despite the data labeling cost for the object detection tasks being substantially more than that of the classification tasks, semi-supervised learning methods for object detection have not been studied much. In this paper, we propose an Interpolation-based Semi-supervised learning method for object Detection (ISD), which considers and solves the problems caused by applying conventional Interpolati…
▽ More
Despite the data labeling cost for the object detection tasks being substantially more than that of the classification tasks, semi-supervised learning methods for object detection have not been studied much. In this paper, we propose an Interpolation-based Semi-supervised learning method for object Detection (ISD), which considers and solves the problems caused by applying conventional Interpolation Regularization (IR) directly to object detection. We divide the output of the model into two types according to the objectness scores of both original patches that are mixed in IR. Then, we apply a separate loss suitable for each type in an unsupervised manner. The proposed losses dramatically improve the performance of semi-supervised learning as well as supervised learning. In the supervised learning setting, our method improves the baseline methods by a significant margin. In the semi-supervised learning setting, our algorithm improves the performance on a benchmark dataset (PASCAL VOC and MSCOCO) in a benchmark architecture (SSD).
△ Less
Submitted 29 December, 2020; v1 submitted 3 June, 2020;
originally announced June 2020.
-
The Infrared Medium-deep Survey. \Romannum{7}. Faint Quasars at $z \sim 5$ in the ELAIS-N1 Field
Authors:
Suhyun Shin,
Myungshin Im,
Yongjung Kim,
Minhee Hyun,
Soojong Pak,
Yiseul Jeon,
Tae-Geun Ji,
Hojae Ahn,
Seoyeon Byeon,
Jimin Han,
Sungyong Hwang,
Sophia Kim,
Gu Lim,
Insu Paek,
Gregory S. H. Paek,
Yoon Chan Taak,
Changsu Choi,
Jueun Hong,
Hyunsung David Jun,
Dohyeong Kim,
Duho Kim,
Min** Kim,
Jae-Woo Kim,
Ji Hoon Kim,
Hye-In Lee
, et al. (4 additional authors not shown)
Abstract:
The intergalactic medium (IGM) at $z\sim$ 5 to 6 is largely ionized, and yet the main source for the IGM ionization in the early universe is uncertain. Of the possible contributors are faint quasars with $-26 \lesssim M_{\rm 1450} \lesssim -23$, but their number density is poorly constrained at $z\sim5$. In this paper, we present our survey of faint quasars at $z\sim5$ in the European Large-Area {…
▽ More
The intergalactic medium (IGM) at $z\sim$ 5 to 6 is largely ionized, and yet the main source for the IGM ionization in the early universe is uncertain. Of the possible contributors are faint quasars with $-26 \lesssim M_{\rm 1450} \lesssim -23$, but their number density is poorly constrained at $z\sim5$. In this paper, we present our survey of faint quasars at $z\sim5$ in the European Large-Area {\it ISO} Survey-North 1 (ELAIS-N1) field over a survey area of 6.51 deg$^2$ and examine if such quasars can be the dominant source of the IGM ionization. We use the deep optical/near-infrared data of the ELAIS-N1 field as well as the additional medium-band observations to find $z \sim 5$ quasars through a two-step approach using the broadband color selection, and SED fitting with the medium-band information included. Adopting Bayesian information criterion, we identify ten promising quasar candidates. Spectra of three of the candidates are obtained, confirming all of them to be quasars at $z\sim5$ and supporting the reliability of the quasar selection. Using the promising candidates, we derive the $z\sim5$ quasar luminosity function at $-26 \lesssim M_{\rm 1450} \lesssim -23$. The number density of faint $z\sim5$ quasars in the ELAIS-N1 field is consistent with several previous results that quasars are not the main contributors to the IGM-ionizing photons at $z\sim5$
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Class-Imbalanced Semi-Supervised Learning
Authors:
Minsung Hyun,
Jisoo Jeong,
Nojun Kwak
Abstract:
Semi-Supervised Learning (SSL) has achieved great success in overcoming the difficulties of labeling and making full use of unlabeled data. However, SSL has a limited assumption that the numbers of samples in different classes are balanced, and many SSL algorithms show lower performance for the datasets with the imbalanced class distribution. In this paper, we introduce a task of class-imbalanced…
▽ More
Semi-Supervised Learning (SSL) has achieved great success in overcoming the difficulties of labeling and making full use of unlabeled data. However, SSL has a limited assumption that the numbers of samples in different classes are balanced, and many SSL algorithms show lower performance for the datasets with the imbalanced class distribution. In this paper, we introduce a task of class-imbalanced semi-supervised learning (CISSL), which refers to semi-supervised learning with class-imbalanced data. In doing so, we consider class imbalance in both labeled and unlabeled sets. First, we analyze existing SSL methods in imbalanced environments and examine how the class imbalance affects SSL methods. Then we propose Suppressed Consistency Loss (SCL), a regularization method robust to class imbalance. Our method shows better performance than the conventional methods in the CISSL environment. In particular, the more severe the class imbalance and the smaller the size of the labeled data, the better our method performs.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Deep Learning-Based Solvability of Underdetermined Inverse Problems in Medical Imaging
Authors:
Chang Min Hyun,
Seong Hyeon Baek,
Mingyu Lee,
Sung Min Lee,
** Keun Seo
Abstract:
Recently, with the significant developments in deep learning techniques, solving underdetermined inverse problems has become one of the major concerns in the medical imaging domain. Typical examples include undersampled magnetic resonance imaging, interior tomography, and sparse-view computed tomography, where deep learning techniques have achieved excellent performances. Although deep learning me…
▽ More
Recently, with the significant developments in deep learning techniques, solving underdetermined inverse problems has become one of the major concerns in the medical imaging domain. Typical examples include undersampled magnetic resonance imaging, interior tomography, and sparse-view computed tomography, where deep learning techniques have achieved excellent performances. Although deep learning methods appear to overcome the limitations of existing mathematical methods when handling various underdetermined problems, there is a lack of rigorous mathematical foundations that would allow us to elucidate the reasons for the remarkable performance of deep learning methods. This study focuses on learning the causal relationship regarding the structure of the training data suitable for deep learning, to solve highly underdetermined inverse problems. We observe that a majority of the problems of solving underdetermined linear systems in medical imaging are highly non-linear. Furthermore, we analyze if a desired reconstruction map can be learnable from the training data and underdetermined system.
△ Less
Submitted 25 June, 2020; v1 submitted 6 January, 2020;
originally announced January 2020.
-
More connected, more active: galaxy clusters and groups at z~1 and the connection between their quiescent galaxy fractions and large-scale environments
Authors:
Seong-Kook Lee,
Myungshin Im,
Minhee Hyun,
Bomi Park,
Jae-Woo Kim,
Dohyeong Kim,
Yongjung Kim
Abstract:
High-redshift galaxy clusters, unlike local counterparts, show diverse star formation activities. However, it is still unclear what keeps some of the high-redshift clusters active in star formation. To address this issue, we performed a multi-object spectroscopic (MOS) observation of 226 high-redshift (0.8 < z < 1.3) galaxies in galaxy cluster candidates and the areas surrounding them. Our spectro…
▽ More
High-redshift galaxy clusters, unlike local counterparts, show diverse star formation activities. However, it is still unclear what keeps some of the high-redshift clusters active in star formation. To address this issue, we performed a multi-object spectroscopic (MOS) observation of 226 high-redshift (0.8 < z < 1.3) galaxies in galaxy cluster candidates and the areas surrounding them. Our spectroscopic observation reveals six to eight clusters/groups at z ~ 0.9 and z ~ 1.3. The redshift measurements demonstrate the reliability of our photometric redshift measurements, which in turn gives credibility for using photometric redshift members for the analysis of large-scale structures (LSSs). Our investigation of the large-scale environment (~10 Mpc) surrounding each galaxy cluster reveals LSSs --- structures up to ~10 Mpc scale --- around many of, but not all, the confirmed overdensities and the cluster candidates. We investigate the correlation between quiescent galaxy fraction of galaxy overdensities and their surrounding LSSs, with a larger sample of ~ 20 overdensities including photometrically selected overdensities at 0.6 < z < 0.9. Interestingly, galaxy overdensities embedded within these extended LSSs show a lower fraction of quiescent galaxies (~ 20 %) than isolated ones at similar redshifts (with a quiescent galaxy fraction of ~ 50 %). Furthermore, we find a possible indication that clusters/groups with a high quiescent galaxy fraction are more centrally concentrated. Based on these results, we suggest that LSSs are the main reservoirs of gas and star-forming galaxies to keep galaxy clusters fresh and extended in size at z ~ 1.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Framelet Pooling Aided Deep Learning Network : The Method to Process High Dimensional Medical Data
Authors:
Chang Min Hyun,
Kang Cheol Kim,
Hyun Cheol Cho,
Jae Kyu Choi,
** Keun Seo
Abstract:
Machine learning-based analysis of medical images often faces several hurdles, such as the lack of training data, the curse of dimensionality problem, and the generalization issues. One of the main difficulties is that there exists computational cost problem in dealing with input data of large size matrices which represent medical images. The purpose of this paper is to introduce a framelet-poolin…
▽ More
Machine learning-based analysis of medical images often faces several hurdles, such as the lack of training data, the curse of dimensionality problem, and the generalization issues. One of the main difficulties is that there exists computational cost problem in dealing with input data of large size matrices which represent medical images. The purpose of this paper is to introduce a framelet-pooling aided deep learning method for mitigating computational bundle, caused by large dimensionality. By transforming high dimensional data into low dimensional components by filter banks with preserving detailed information, the proposed method aims to reduce the complexity of the neural network and computational costs significantly during the learning process. Various experiments show that our method is comparable to the standard unreduced learning method, while reducing computational burdens by decomposing large-sized learning tasks into several small-scale learning tasks.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Feature Fusion for Online Mutual Knowledge Distillation
Authors:
Jangho Kim,
Minsung Hyun,
Inseop Chung,
Nojun Kwak
Abstract:
We propose a learning framework named Feature Fusion Learning (FFL) that efficiently trains a powerful classifier through a fusion module which combines the feature maps generated from parallel neural networks. Specifically, we train a number of parallel neural networks as sub-networks, then we combine the feature maps from each sub-network using a fusion module to create a more meaningful feature…
▽ More
We propose a learning framework named Feature Fusion Learning (FFL) that efficiently trains a powerful classifier through a fusion module which combines the feature maps generated from parallel neural networks. Specifically, we train a number of parallel neural networks as sub-networks, then we combine the feature maps from each sub-network using a fusion module to create a more meaningful feature map. The fused feature map is passed into the fused classifier for overall classification. Unlike existing feature fusion methods, in our framework, an ensemble of sub-network classifiers transfers its knowledge to the fused classifier and then the fused classifier delivers its knowledge back to each sub-network, mutually teaching one another in an online-knowledge distillation manner. This mutually teaching system not only improves the performance of the fused classifier but also obtains performance gain in each sub-network. Moreover, our model is more beneficial because different types of network can be used for each sub-network. We have performed a variety of experiments on multiple datasets such as CIFAR-10, CIFAR-100 and ImageNet and proved that our method is more effective than other alternative methods in terms of performance of both sub-networks and the fused classifier.
△ Less
Submitted 21 July, 2020; v1 submitted 18 April, 2019;
originally announced April 2019.
-
Disentangling Options with Hellinger Distance Regularizer
Authors:
Minsung Hyun,
Junyoung Choi,
Nojun Kwak
Abstract:
In reinforcement learning (RL), temporal abstraction still remains as an important and unsolved problem. The options framework provided clues to temporal abstraction in the RL, and the option-critic architecture elegantly solved the two problems of finding options and learning RL agents in an end-to-end manner. However, it is necessary to examine whether the options learned through this method pla…
▽ More
In reinforcement learning (RL), temporal abstraction still remains as an important and unsolved problem. The options framework provided clues to temporal abstraction in the RL, and the option-critic architecture elegantly solved the two problems of finding options and learning RL agents in an end-to-end manner. However, it is necessary to examine whether the options learned through this method play a mutually exclusive role. In this paper, we propose a Hellinger distance regularizer, a method for disentangling options. In addition, we will shed light on various indicators from the statistical point of view to compare with the options learned through the existing option-critic architecture.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Task-oriented Design through Deep Reinforcement Learning
Authors:
Junyoung Choi,
Minsung Hyun,
Nojun Kwak
Abstract:
We propose a new low-cost machine-learning-based methodology which assists designers in reducing the gap between the problem and the solution in the design process. Our work applies reinforcement learning (RL) to find the optimal task-oriented design solution through the construction of the design action for each task. For this task-oriented design, the 3D design process in product design is assig…
▽ More
We propose a new low-cost machine-learning-based methodology which assists designers in reducing the gap between the problem and the solution in the design process. Our work applies reinforcement learning (RL) to find the optimal task-oriented design solution through the construction of the design action for each task. For this task-oriented design, the 3D design process in product design is assigned to an action space in Deep RL, and the desired 3D model is obtained by training each design action according to the task. By showing that this method achieves satisfactory design even when applied to a task pursuing multiple goals, we suggest the direction of how machine learning can contribute to the design process. Also, we have validated with product designers that this methodology can assist the creative part in the process of design.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Intensive Monitoring Survey of Nearby Galaxies (IMSNG)
Authors:
Myungshin Im,
Changsu Choi,
Sungyong Hwang,
Gu Lim,
Joonho Kim,
Sophia Kim,
Gregory S. H. Paek,
Sang-Yun Lee,
Sung-Chul Yoon,
Hyun** Jung,
Hyun-Il Sung,
Yeong-beom Jeon,
Shuhrat Ehgamberdiev,
Otabek Burhonov,
Davron Milzaqulov,
Omon Parmonov,
Sang Gak Lee,
Wonseok Kang,
Taewoo Kim,
Sun-gill Kwon,
Soojong Pak,
Tae-Geun Ji,
Hye-In Lee,
Woo** Park,
Hojae Ahn
, et al. (24 additional authors not shown)
Abstract:
Intensive Monitoring Survey of Nearby Galaxies (IMSNG) is a high cadence observation program monitoring nearby galaxies with high probabilities of hosting supernovae (SNe). IMSNG aims to constrain the SN explosion mechanism by inferring sizes of SN progenitor systems through the detection of the shock-heated emission that lasts less than a few days after the SN explosion. To catch the signal, IMSN…
▽ More
Intensive Monitoring Survey of Nearby Galaxies (IMSNG) is a high cadence observation program monitoring nearby galaxies with high probabilities of hosting supernovae (SNe). IMSNG aims to constrain the SN explosion mechanism by inferring sizes of SN progenitor systems through the detection of the shock-heated emission that lasts less than a few days after the SN explosion. To catch the signal, IMSNG utilizes a network of 0.5-m to 1-m class telescopes around the world and monitors the images of 60 nearby galaxies at distances D < 50 Mpc to a cadence as short as a few hours. The target galaxies are bright in near-ultraviolet (NUV) with M_NUV < -18.4 AB mag and have high probabilities of hosting SNe (0.06 SN/yr per galaxy). With this strategy, we expect to detect the early light curves of 3.4 SNe per year to a depth of R ~ 19.5 mag, enabling us to detect the shock-heated emission from a progenitor star with a radius as small as 0.1 R_sun. The accumulated data will be also useful for studying faint features around the target galaxies and other science projects. So far, 18 SNe have occurred in our target fields (16 in IMSNG galaxies) over 5 years, confirming our SN rate estimate of 0.06 SN/yr per galaxy.
△ Less
Submitted 31 January, 2019;
originally announced January 2019.
-
Extremely Massive Quasars are not Good Proxies for Dense Environments Compared to Massive Galaxies: Environments of Extremely Massive Quasars and Galaxies
Authors:
Yongmin Yoon,
Myungshin Im,
Minhee Hyun,
Hyunsung David Jun,
Narae Hwang,
Min** Kim,
Byeong-Gon Park
Abstract:
Black hole mass scaling relations suggest that extremely massive black holes (EMBHs) with $M_\mathrm{BH}\ge10^{9.4}\,M_{\odot}$ are found in the most massive galaxies with $M_\mathrm{star}\ge10^{11.6}\,M_{\odot}$, which are commonly found in dense environments, like galaxy clusters. Therefore, one can expect that there is a close connection between active EMBHs and dense environments. Here, we stu…
▽ More
Black hole mass scaling relations suggest that extremely massive black holes (EMBHs) with $M_\mathrm{BH}\ge10^{9.4}\,M_{\odot}$ are found in the most massive galaxies with $M_\mathrm{star}\ge10^{11.6}\,M_{\odot}$, which are commonly found in dense environments, like galaxy clusters. Therefore, one can expect that there is a close connection between active EMBHs and dense environments. Here, we study the environments of 9461 galaxies and 2943 quasars at $0.24 \le z \le 0.40$, among which 52 are extremely massive quasars with $\log(M_\mathrm{BH}/M_{\odot}) \ge 9.4$, using Sloan Digital Sky Survey and MMT Hectospec data. We find that, on average, both massive quasars and massive galaxies reside in environments more than $\sim2$ times as dense as those of their less massive counterparts with $\log(M_\mathrm{BH}/M_{\odot}) \le 9.0$. However, massive quasars reside in environments about half as dense as inactive galaxies with $\log(M_\mathrm{BH}/M_{\odot}) \ge 9.4$, and only about one third of massive quasars are found in galaxy clusters, while about two thirds of massive galaxies reside in such clusters. This indicates that massive galaxies are a much better signpost for galaxy clusters than massive quasars. The prevalence of massive quasars in moderate to low density environments is puzzling, considering that several simulation results show that these quasars appear to prefer dense environments. Several possible reasons for this discrepancy are discussed, although further investigation is needed to obtain a definite explanation.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
The Infrared Medium-deep Survey. VI. Discovery of Faint Quasars at $z\sim5$ with a Medium-band-based Approach
Authors:
Yongjung Kim,
Myungshin Im,
Yiseul Jeon,
Min** Kim,
Soojong Pak,
Yoon Chan Taak,
Changsu Choi,
Jueun Hong,
Minhee Hyun,
Tae-Geun Ji,
Hyunsung David Jun,
Marios Karouzos,
Dohyeong Kim,
Duho Kim,
Jae-Woo Kim,
Ji Hoon Kim,
Hye-In Lee,
Seong-Kook Lee,
Won-Kee Park,
Yongmin Yoon,
Seoyeon Byeon,
Sungyong Hwang,
Joonho Kim,
Sophia Kim,
Gu Lim
, et al. (3 additional authors not shown)
Abstract:
The faint quasars with $M_{1450}>-24$ mag are known to hold the key to the determination of the ultraviolet emissivity for the cosmic re-ionization. But only a few have been identified so far because of the limitations on the survey data. Here, we present the first results of the $z\sim5$ faint quasar survey with the Infrared Medium-deep Survey (IMS), which covers $\sim100$ deg$^{2}$ areas in $J$-…
▽ More
The faint quasars with $M_{1450}>-24$ mag are known to hold the key to the determination of the ultraviolet emissivity for the cosmic re-ionization. But only a few have been identified so far because of the limitations on the survey data. Here, we present the first results of the $z\sim5$ faint quasar survey with the Infrared Medium-deep Survey (IMS), which covers $\sim100$ deg$^{2}$ areas in $J$-band to the depths of $J_{\rm AB}\sim23$ mag. To improve selection methods, the medium-band follow-up imaging has been carried out using the SED camera for QUasars in Early uNiverse (SQUEAN) on the Otto Struve 2.1 m Telescope. The optical spectra of the candidates were obtained with 8-m class telescopes. We newly discovered 10 quasars with $-25<M_{1450}<-23$ at $z\sim5$, among which three have been missed in a previous survey using the same optical data over the same area, implying the necessity for improvements in high redshift faint quasars selection. We derived photometric redshifts from the medium-band data, and find that they have high accuracies of $\langle|Δz|/(1+z)\rangle=0.016$. The medium-band-based approach allows us to rule out many of the interlopers that contaminate $\gtrsim20~\%$ of the broad-band-selected quasar candidates. These results suggest that the medium-band-based approach is a powerful way to identify $z\sim5$ quasars and measure their redshifts at high accuracy (1-2 %). It is also a cost-effective way to understand the contribution of quasars to the cosmic re-ionization history.
△ Less
Submitted 22 November, 2018; v1 submitted 21 November, 2018;
originally announced November 2018.
-
Towards Governing Agent's Efficacy: Action-Conditional $β$-VAE for Deep Transparent Reinforcement Learning
Authors:
John Yang,
Gyujeong Lee,
Minsung Hyun,
Simyung Chang,
Nojun Kwak
Abstract:
We tackle the blackbox issue of deep neural networks in the settings of reinforcement learning (RL) where neural agents learn towards maximizing reward gains in an uncontrollable way. Such learning approach is risky when the interacting environment includes an expanse of state space because it is then almost impossible to foresee all unwanted outcomes and penalize them with negative rewards before…
▽ More
We tackle the blackbox issue of deep neural networks in the settings of reinforcement learning (RL) where neural agents learn towards maximizing reward gains in an uncontrollable way. Such learning approach is risky when the interacting environment includes an expanse of state space because it is then almost impossible to foresee all unwanted outcomes and penalize them with negative rewards beforehand. Unlike reverse analysis of learned neural features from previous works, our proposed method \nj{tackles the blackbox issue by encouraging} an RL policy network to learn interpretable latent features through an implementation of a disentangled representation learning method. Toward this end, our method allows an RL agent to understand self-efficacy by distinguishing its influences from uncontrollable environmental factors, which closely resembles the way humans understand their scenes. Our experimental results show that the learned latent factors not only are interpretable, but also enable modeling the distribution of entire visited state space with a specific action condition. We have experimented that this characteristic of the proposed structure can lead to ex post facto governance for desired behaviors of RL agents.
△ Less
Submitted 10 November, 2018;
originally announced November 2018.
-
Analytical and empirical measurement of fiber photometry signal volume in brain tissue
Authors:
Marco Pisanello,
Filippo Pisano,
Minsuk Hyun,
Emanuela Maglie,
Antonio Balena,
Massimo De Vittorio,
Bernardo L Sabatini,
Ferruccio Pisanello
Abstract:
Fiber photometry permits monitoring fluorescent indicators of neural activity in behaving animals. Optical fibers are typically used to excite and collect fluorescence from genetically-encoded calcium indicators expressed by a subset of neurons in a circuit of interest. However, a quantitative understanding of the brain volumes from which signal is collected and how this depends on the properties…
▽ More
Fiber photometry permits monitoring fluorescent indicators of neural activity in behaving animals. Optical fibers are typically used to excite and collect fluorescence from genetically-encoded calcium indicators expressed by a subset of neurons in a circuit of interest. However, a quantitative understanding of the brain volumes from which signal is collected and how this depends on the properties of the optical fibers are lacking. Here we analytically model and experimentally measure the light emission and collection fields for optical fibers in solution and scattering tissue, providing a comprehensive characterization of fibers commonly employed for fiber photometry. Since photometry signals depend on both excitation and collection efficiency, a combined confocal/2-photon microscope was developed to evaluate these parameters independently. We find that the 80% of the effective signal arises from a 10^5-10^6 um3 volume extending ~200 um from the fiber face, and thus permitting a spatial interpretation of measurements made with fiber photometry.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
The Infrared Medium-deep Survey. IV. Low Eddington Ratio of A Faint Quasar at $z\sim6$: Not Every Supermassive Black Hole is Growing Fast in the Early Universe
Authors:
Yongjung Kim,
Myungshin Im,
Yiseul Jeon,
Min** Kim,
Minhee Hyun,
Dohyeong Kim,
Jae-Woo Kim,
Yoon Chan Taak,
Yongmin Yoon,
Changsu Choi,
Jueun Hong,
Hyunsung David Jun,
Marios Karouzos,
Duho Kim,
Ji Hoon Kim,
Seong-Kook Lee,
Soojong Pak,
Won-Kee Park
Abstract:
To date, most of the luminous quasars known at $z\sim6$ have been found to be in maximal accretion with the Eddington ratios, $λ_{\rm{Edd}}\sim1$, suggesting enhanced nuclear activities in the early universe. However, this may not be the whole picture of supermassive black hole (SMBH) growth since previous studies have not reached on faint quasars that are more likely to harbor SMBHs with low…
▽ More
To date, most of the luminous quasars known at $z\sim6$ have been found to be in maximal accretion with the Eddington ratios, $λ_{\rm{Edd}}\sim1$, suggesting enhanced nuclear activities in the early universe. However, this may not be the whole picture of supermassive black hole (SMBH) growth since previous studies have not reached on faint quasars that are more likely to harbor SMBHs with low $λ_{\rm{Edd}}$. To gain a better understanding on the accretion activities in quasars in the early universe, we obtained a deep near-infrared (NIR) spectrum of a quasar, IMS J220417.92+011144.8 (hereafter IMS J2204+0112), one of the faintest quasars that have been identified at $z\sim6$. From the redshifted C IV $λ1549$ emission line in the NIR spectrum, we find that IMS J2204+0112 harbors a SMBH with about a billion solar mass and $λ_{\rm{Edd}} \sim 0.1$, but with a large uncertainty in both quantities (0.41 dex). IMS J2204+0112 has one of the lowest Eddington ratios among quasars at $z\sim6$, but a common value among quasars at $z\sim2$. Its low $λ_{\rm{Edd}}$ can be explained with two scenarios; the SMBH growth from a stellar mass black hole through short-duration super-Eddington accretion events or from a massive black hole seed ($\sim10^{5}\,M_{\odot}$) with Eddington-limited accretion. NIR spectra of more faint quasars are needed to better understand the accretion activities of SMBHs at $z \sim 6$.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Deep learning for undersampled MRI reconstruction
Authors:
Chang Min Hyun,
Hwa Pyung Kim,
Sung Min Lee,
Sungchul Lee,
** Keun Seo
Abstract:
This paper presents a deep learning method for faster magnetic resonance imaging (MRI) by reducing k-space data with sub-Nyquist sampling strategies and provides a rationale for why the proposed approach works well. Uniform subsampling is used in the time-consuming phase-encoding direction to capture high-resolution image information, while permitting the image-folding problem dictated by the Pois…
▽ More
This paper presents a deep learning method for faster magnetic resonance imaging (MRI) by reducing k-space data with sub-Nyquist sampling strategies and provides a rationale for why the proposed approach works well. Uniform subsampling is used in the time-consuming phase-encoding direction to capture high-resolution image information, while permitting the image-folding problem dictated by the Poisson summation formula. To deal with the localization uncertainty due to image folding, very few low-frequency k-space data are added. Training the deep learning net involves input and output images that are pairs of Fourier transforms of the subsampled and fully sampled k-space data. Numerous experiments show the remarkable performance of the proposed method; only 29% of k-space data can generate images of high quality as effectively as standard MRI reconstruction with fully sampled data.
△ Less
Submitted 12 May, 2019; v1 submitted 8 September, 2017;
originally announced September 2017.
-
The Infrared Medium-deep Survey. III. Survey of Luminous Quasars at 4.7 $\leq$ z $\leq$ 5.4
Authors:
Yiseul Jeon,
Myungshin Im,
Dohyeong Kim,
Yongjung Kim,
Hyunsung David Jun,
Soojong Pak,
Yoon Chan Taak,
Giseon Baek,
Changsu Choi,
Nahyun Choi,
Jueun Hong,
Minhee Hyun,
Tae-Geun Ji,
Marios Karouzos,
Duho Kim,
Jae-Woo Kim,
Ji Hoon Kim,
Min** Kim,
Sanghyuk Kim,
Hye-In Lee,
Seong-Kook Lee,
Won-Kee Park,
Woo** Park,
Yongmin Yoon
Abstract:
We present our first results of the survey for high redshift quasars at $5 \lesssim {\rm z} \lesssim 5.7$. The search for quasars in this redshift range has been known to be challenging due to limitations of filter sets used in previous studies. We conducted a quasar survey for two specific redshift ranges, 4.60 $\leq$ z $\leq$ 5.40 and 5.50 $\leq$ z $\leq$ 6.05, using multi-wavelength data that i…
▽ More
We present our first results of the survey for high redshift quasars at $5 \lesssim {\rm z} \lesssim 5.7$. The search for quasars in this redshift range has been known to be challenging due to limitations of filter sets used in previous studies. We conducted a quasar survey for two specific redshift ranges, 4.60 $\leq$ z $\leq$ 5.40 and 5.50 $\leq$ z $\leq$ 6.05, using multi-wavelength data that include observations using custom-designed filters, $is$ and $iz$. Using these filters and a new selection technique, we were able to reduce the fraction of interlopers. Through optical spectroscopy, we confirmed seven quasars at 4.7 $\leq$ z $\leq$ 5.4 with $-27.4 < M_{1450} < -26.4$ which were discovered independently by another group recently. We estimated black hole masses and Eddington ratios of four of these quasars from optical and near-infrared spectra, and found that these quasars are undergoing nearly Eddington-limited accretion which is consistent with the rapid growth of supermassive black holes in luminous quasars at z $\sim$ 5.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Development of SED Camera for Quasars in Early Universe (SQUEAN)
Authors:
Sanghyuk Kim,
Yiseul Jeon,
Hye-In Lee,
Woo** Park,
Tae-Geun Ji,
Minhee Hyun,
Changsu Choi,
Myungshin Im,
Soojong Pak
Abstract:
We describe the characteristics and performance of a camera system, Spectral energy distribution Camera for Quasars in Early Universe (SQUEAN). It was developed to measure SEDs of high redshift quasar candidates (z $\gtrsim$ 5) and other targets, e.g., young stellar objects, supernovae, and gamma-ray bursts, and to trace the time variability of SEDs of objects such as active galactic nuclei (AGNs)…
▽ More
We describe the characteristics and performance of a camera system, Spectral energy distribution Camera for Quasars in Early Universe (SQUEAN). It was developed to measure SEDs of high redshift quasar candidates (z $\gtrsim$ 5) and other targets, e.g., young stellar objects, supernovae, and gamma-ray bursts, and to trace the time variability of SEDs of objects such as active galactic nuclei (AGNs). SQUEAN consists of an on-axis focal plane camera module, an auto-guiding system, and mechanical supporting structures. The science camera module is composed of a focal reducer, a customizable filter wheel, and a CCD camera on the focal plane. The filter wheel uses filter cartridges that can house filters with different shapes and sizes, enabling the filter wheel to hold twenty filters of 50 mm $\times$ 50 mm size, ten filters of 86 mm $\times$ 86 mm size, or many other combinations. The initial filter mask was applied to calibrate the filter wheel with high accuracy and we verified that the filter position is repeatable at much less than one pixel accuracy. We installed and tested 50 nm medium bandwidth filters of 600 -- 1,050 nm and other filters at the commissioning observation in 2015 February. We found that SQUEAN can reach limiting magnitudes of 23.3 - 25.3 AB mag at 5-$σ$ in a 1-hour total integration time. - 25.3 AB mag at 5-$σ$ in a 1-hour total integration time.
△ Less
Submitted 30 May, 2016;
originally announced May 2016.
-
Discovery of a Supercluster at $z\sim$0.91 and Testing the $Λ$CDM Cosmological Model
Authors:
J. -W. Kim,
M. Im,
S. -K. Lee,
A. C. Edge,
M. Hyun,
D. Kim,
C. Choi,
J. Hong,
Y. Jeon,
H. D. Jun,
M. Karouzos,
D. Kim,
J. H. Kim,
Y. Kim,
W. -K. Park,
Y. C. Taak,
Y. Yoon
Abstract:
The $Λ$CDM cosmological model successfully reproduces many aspects of the galaxy and structure formation of the universe. However, the growth of large-scale structures (LSSs) in the early universe is not well tested yet with observational data. Here, we have utilized wide and deep optical--near-infrared data in order to search for distant galaxy clusters and superclusters ($0.8<z<1.2$). From the s…
▽ More
The $Λ$CDM cosmological model successfully reproduces many aspects of the galaxy and structure formation of the universe. However, the growth of large-scale structures (LSSs) in the early universe is not well tested yet with observational data. Here, we have utilized wide and deep optical--near-infrared data in order to search for distant galaxy clusters and superclusters ($0.8<z<1.2$). From the spectroscopic observation with the Inamori Magellan Areal Camera and Spectrograph (IMACS) on the Magellan telescope, three massive clusters at $z\sim$0.91 are confirmed in the SSA22 field. Interestingly, all of them have similar redshifts within $Δz\sim$0.01 with velocity dispersions ranging from 470 to 1300 km s$^{-1}$. Moreover, as the maximum separation is $\sim$15 Mpc, they compose a supercluster at $z\sim$0.91, meaning that this is one of the most massive superclusters at this redshift to date. The galaxy density map implies that the confirmed clusters are embedded in a larger structure stretching over $\sim$100 Mpc. $Λ$CDM models predict about one supercluster like this in our surveyed volume, consistent with our finding so far. However, there are more supercluster candidates in this field, suggesting that additional studies are required to determine if the $Λ$CDM cosmological model can successfully reproduce the LSSs at high redshift.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
The Infrared Medium-Deep Survey. V. A New Selection Strategy for Quasars at z > 5 based on Medium-Band Observation with SQUEAN
Authors:
Yiseul Jeon,
Myungshin Im,
Soojong Pak,
Minhee Hyun,
Sanghyuk Kim,
Yongjung Kim,
Hye-In Lee,
Woo** Park
Abstract:
Multiple color selection techniques have been successful in identifying quasars from wide-field broad-band imaging survey data. Among the quasars that have been discovered so far, however, there is a redshift gap at $5 \lesssim {\rm z} \lesssim 5.7$ due to the limitations of filter sets in previous studies. In this work, we present a new selection technique of high redshift quasars using a sequenc…
▽ More
Multiple color selection techniques have been successful in identifying quasars from wide-field broad-band imaging survey data. Among the quasars that have been discovered so far, however, there is a redshift gap at $5 \lesssim {\rm z} \lesssim 5.7$ due to the limitations of filter sets in previous studies. In this work, we present a new selection technique of high redshift quasars using a sequence of medium-band filters: nine filters with central wavelengths from 625 to 1025 nm and bandwidths of 50 nm. Photometry with these medium-bands traces the spectral energy distribution (SED) of a source, similar to spectroscopy with resolution R $\sim$ 15. By conducting medium-band observations of high redshift quasars at 4.7 $\leq$ z $\leq$ 6.0 and brown dwarfs (the main contaminants in high redshift quasar selection) using the SED camera for QUasars in EArly uNiverse (SQUEAN) on the 2.1-m telescope at the McDonald Observatory, we show that these medium-band filters are superior to multi-color broad-band color section in separating high redshift quasars from brown dwarfs. In addition, we show that redshifts of high redshift quasars can be determined to an accuracy of $Δ{\rm z}/(1+{\rm z}) = 0.002$ -- $0.026$. The selection technique can be extended to z $\sim$ 7, suggesting that the medium-band observation can be powerful in identifying quasars even at the re-ionization epoch.
△ Less
Submitted 6 February, 2016;
originally announced February 2016.
-
Discovery of A Faint Quasar at z~6 and Implications for Cosmic Reionization
Authors:
Yongjung Kim,
Myungshin Im,
Yiseul Jeon,
Min** Kim,
Changsu Choi,
Jueun Hong,
Minhee Hyun,
Hyunsung David Jun,
Marios Karouzos,
Dohyeong Kim,
Duho Kim,
Jae-Woo Kim,
Ji Hoon Kim,
Seong-Kook Lee,
Soojong Pak,
Won-Kee Park,
Yoon Chan Taak,
Yongmin Yoon
Abstract:
Recent studies suggest that faint active galactic nuclei may be responsible for the reionization of the universe. Confirmation of this scenario requires spectroscopic identification of faint quasars ($M_{1450}>-24$ mag) at $z \gtrsim6$, but only a very small number of such quasars have been spectroscopically identified so far. Here, we report the discovery of a faint quasar IMS J220417.92+011144.8…
▽ More
Recent studies suggest that faint active galactic nuclei may be responsible for the reionization of the universe. Confirmation of this scenario requires spectroscopic identification of faint quasars ($M_{1450}>-24$ mag) at $z \gtrsim6$, but only a very small number of such quasars have been spectroscopically identified so far. Here, we report the discovery of a faint quasar IMS J220417.92+011144.8 at z~6 in a 12.5 deg$^{2}$ region of the SA22 field of the Infrared Medium-deep Survey (IMS). The spectrum of the quasar shows a sharp break at $\sim8443~\rmÅ$, with emission lines redshifted to $z=5.944 \pm 0.002$ and rest-frame ultraviolet continuum magnitude $M_{1450}=-23.59\pm0.10$ AB mag. The discovery of IMS J220417.92+011144.8 is consistent with the expected number of quasars at z~6 estimated from quasar luminosity functions based on previous observations of spectroscopically identified low-luminosity quasars . This suggests that the number of $M_{1450}\sim-23$ mag quasars at z~6 may not be high enough to fully account for the reionization of the universe. In addition, our study demonstrates that faint quasars in the early universe can be identified effectively with a moderately wide and deep near-infrared survey such as the IMS.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
RRR Characteristics for SRF Cavities
Authors:
Yoochul Jung,
Myungook Hyun,
Mijoung Joung
Abstract:
The first heavy ion accelerator is being constructed by the rare isotope science project (RISP) launched by the Institute of Basic Science (IBS) in South Korea. Four different types of superconducting cavities were designed, and prototypes were fabricated such as a quarter wave resonator (QWR), a half wave resonator (HWR) and a single spoke resonator (SSR). One of the critical factors determining…
▽ More
The first heavy ion accelerator is being constructed by the rare isotope science project (RISP) launched by the Institute of Basic Science (IBS) in South Korea. Four different types of superconducting cavities were designed, and prototypes were fabricated such as a quarter wave resonator (QWR), a half wave resonator (HWR) and a single spoke resonator (SSR). One of the critical factors determining performances of the superconducting cavities is a residual resistance ratio (RRR). The RRR values essentially represent how much niobium is pure and how fast niobium can transmit heat as well. In general, the RRR degrades during electron beam welding due to the impurity incorporation. Thus it is important to maintain RRR above a certain value at which a niobium cavity shows target performance. In this study, RRR degradation related with electron beam welding conditions, for example, welding power, welding speed, and vacuum level will be discussed.
△ Less
Submitted 28 July, 2015;
originally announced July 2015.
-
The Infrared Medium-Deep Survey II: How to Trigger Radio-AGN? Hints from Their Environments
Authors:
Marios Karouzos,
Myungshin Im,
Jae-Woo Kim,
Seong-Kook Lee,
Scott Chapman,
Yiseul Jeon,
Changsu Choi,
Jueun Hong,
Minhee Hyun,
Hyunsung David Jun,
Dohyeong Kim,
Yongjung Kim,
Ji Hoon Kim,
Duho Kim,
Soojong Pak,
Won-Kee Park,
Yoon Chan Taak,
Yongmin Yoon,
Alastair Edge
Abstract:
Activity at the centers of galaxies, during which the central supermassive black hole is accreting material, is nowadays accepted to be rather ubiquitous and most probably a phase of every galaxy's evolution. It has been suggested that galactic mergers and interactions may be the culprits behind the triggering of nuclear activity. We use near-infrared data from the new Infrared Medium-Deep Survey…
▽ More
Activity at the centers of galaxies, during which the central supermassive black hole is accreting material, is nowadays accepted to be rather ubiquitous and most probably a phase of every galaxy's evolution. It has been suggested that galactic mergers and interactions may be the culprits behind the triggering of nuclear activity. We use near-infrared data from the new Infrared Medium-Deep Survey (IMS) and the Deep eXtragalactic Survey (DXS) of the VIMOS-SA22 field and radio data at 1.4 GHz from the FIRST survey and a deep VLA survey to study the environments of radio-AGN over an area of ~25 sq. degrees and down to a radio flux limit of 0.1 mJy and a J-band magnitude of 23 mag AB. Radio-AGN are predominantly found in environments similar to those of control galaxies at similar redshift, J-band magnitude, and U-R rest-frame absolute color. However, a sub-population of radio-AGN is found in environments up to 100 times denser than their control sources. We thus preclude merging as the dominant triggering mechanism of radio-AGN. Through the fitting of the broadband spectral energy distribution of radio-AGN in the least and most dense environments, we find that those in the least dense environments show higher radio-loudness, higher star formation efficiencies, and higher accretion rates, typical of the so-called high-excitation radio-AGN. These differences tend to disappear at z>1. We interpret our results in terms of a different triggering mechanism for these sources that is driven by mass-loss through winds of young stars created during the observed ongoing star formation.
△ Less
Submitted 20 October, 2014; v1 submitted 15 October, 2014;
originally announced October 2014.