-
A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications
Authors:
Sabrina Livadiotti,
Nicholas H. Crisp,
Peter C. E. Roberts,
Stephen D. Worrall,
Vitor T. A. Oiko,
Steve Edmondson,
Sarah J. Haigh,
Claire Huyton,
Katharine L. Smith,
Luciana A. Sinpetru,
Brandon E. A. Holmes,
Jonathan Becedas,
Rosa María Domínguez,
Valentín Cañas,
Simon Christensen,
Anders Mølgaard,
Jens Nielsen,
Morten Bisgaard,
Yung-An Chan,
Georg H. Herdrich,
Francesco Romano,
Stefanos Fasoulas,
Constantin Traub,
Daniel Garcia-Almiñana,
Silvia Rodriguez-Donaire
, et al. (7 additional authors not shown)
Abstract:
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su…
▽ More
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications.
△ Less
Submitted 22 November, 2020; v1 submitted 1 October, 2020;
originally announced October 2020.
-
The Benefits of Very Low Earth Orbit for Earth Observation Missions
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
C. Huyton,
L. Sinpetru,
K. L. Smith,
S. D. Worrall,
J. Becedas,
R. M. Domínguez,
D. González,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
Y. -A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. García-Almiñana,
S. Rodríguez-Donaire,
M. Sureda
, et al. (8 additional authors not shown)
Abstract:
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob…
▽ More
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods.
However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required.
△ Less
Submitted 16 July, 2020; v1 submitted 15 July, 2020;
originally announced July 2020.
-
RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)
Authors:
Francesco Romano,
Yung-An Chan,
Georg Herdrich,
Peter C. E. Roberts,
C. Traub S. Fasoulas,
K. Smith,
S. Edmondson,
S. Haigh,
N. H. Crisp,
V. T. A. Oiko,
S. D. Worrall,
S. Livadiotti,
C. Huyton,
L. A. Sinpetru,
A. Straker,
J. Becedas,
R. M. Domínguez,
D. González,
V. Cañas,
V. Sulliotti-Linner,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
D. Garcia-Almiñana
, et al. (10 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirem…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is develo** within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
△ Less
Submitted 14 July, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
