-
Dispersion-induced $Q$-factor enhancement in waveguide-coupled surface lattice resonances
Authors:
Jussi Kelavuori,
Ali Panahpour,
Mikko J. Huttunen
Abstract:
Diffractively coupled nanoparticle arrays are promising candidates for hel** to flatten many photonic devices such as lasers, lenses, and metrology instruments. Their performance, however, is directly linked with the size of the metasurfaces, limiting their applicability in nanophotonic applications. Here, we dramatically reduce array sizes of high-$Q$-factor metasurfaces by utilizing strongly d…
▽ More
Diffractively coupled nanoparticle arrays are promising candidates for hel** to flatten many photonic devices such as lasers, lenses, and metrology instruments. Their performance, however, is directly linked with the size of the metasurfaces, limiting their applicability in nanophotonic applications. Here, we dramatically reduce array sizes of high-$Q$-factor metasurfaces by utilizing strongly dispersive media. The effect is demonstrated by theoretically and numerically studying periodic arrays of plasmonic nanoparticles embedded inside Bragg-reflector waveguides. We demonstrate array dimensions reduction up to two orders of magnitude while still achieving ultra-high $Q$-factors in excess of 10$^4$.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Strong Purcell Effect in All-Dielectric Epsilon-Near-Zero Microcavities
Authors:
Ali Panahpour,
Jussi Kelavuori,
Mikko Huttunen
Abstract:
We theoretically study the quality and Purcell enhancement factors in epsilon-near-zero (ENZ) optical microcavities with ideally lossless or slightly lossy structures. In the case of ENZ rectangular cavities with perfect electric conductor (PEC) walls, our results supported by numerical simulations, show that both the quality and Purcell factors grow with increasing the length of cavity, having re…
▽ More
We theoretically study the quality and Purcell enhancement factors in epsilon-near-zero (ENZ) optical microcavities with ideally lossless or slightly lossy structures. In the case of ENZ rectangular cavities with perfect electric conductor (PEC) walls, our results supported by numerical simulations, show that both the quality and Purcell factors grow with increasing the length of cavity, having respective functional dependencies of $n^{-3}$ and $n^{-2}$ on the effective index of refraction, $n$. Further, we study extremely low-loss all-dielectric Bragg reflection waveguide cavities, near their cutoff frequencies. In such ENZ structures, the respective quality and Purcell factors scale as \((nκ)^{-1}\) and $n/κ$, in terms of real ($n$) and imaginary ($κ$) parts of the cavity effective index of refraction. We believe such structures exhibiting remarkably high quality ($\sim10^6$) and Purcell factors ($\sim10^3$), can drastically enhance various linear and nonlinear optical processes, and thus find use in applications ranging from laser development to optical sensing and metrology.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Deep Learning-Based Pilotless Spatial Multiplexing
Authors:
Dani Korpi,
Mikko Honkala,
Janne M. J. Huttunen
Abstract:
This paper investigates the feasibility of machine learning (ML)-based pilotless spatial multiplexing in multiple-input and multiple-output (MIMO) communication systems. Especially, it is shown that by training the transmitter and receiver jointly, the transmitter can learn such constellation shapes for the spatial streams which facilitate completely blind separation and detection by the simultane…
▽ More
This paper investigates the feasibility of machine learning (ML)-based pilotless spatial multiplexing in multiple-input and multiple-output (MIMO) communication systems. Especially, it is shown that by training the transmitter and receiver jointly, the transmitter can learn such constellation shapes for the spatial streams which facilitate completely blind separation and detection by the simultaneously learned receiver. To the best of our knowledge, this is the first time ML-based spatial multiplexing without channel estimation pilots is demonstrated. The results show that the learned pilotless scheme can outperform a conventional pilot-based system by as much as 15-20% in terms of spectral efficiency, depending on the modulation order and signal-to-noise ratio.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Phase-Matched Second-Harmonic Generation from Metasurfaces Inside Multipass Cells
Authors:
Madona Mekhael,
Timo Stolt,
Anna Vesala,
Heikki Rekola,
Tommi K. Hakala,
Robert Fickler,
Mikko J. Huttunen
Abstract:
We demonstrate a simple and scalable approach to increase conversion efficiencies of nonlinear metasurfaces by incorporating them into multipass cells and by letting the pump beam to interact with the metasurfaces multiple times. We experimentally show that by metasurface design, the associated phase-matching criteria can be fulfilled. As a proof of principle, we achieve phase matching of second-h…
▽ More
We demonstrate a simple and scalable approach to increase conversion efficiencies of nonlinear metasurfaces by incorporating them into multipass cells and by letting the pump beam to interact with the metasurfaces multiple times. We experimentally show that by metasurface design, the associated phase-matching criteria can be fulfilled. As a proof of principle, we achieve phase matching of second-harmonic generation (SHG) using a metasurface consisting of aluminium nanoparticles deposited on a glass substrate. The phase-matching condition is verified to be achieved by measuring superlinear dependence of the detected SHG as a function of number of passes. We measure an order of magnitude enhancement in the SHG signal when the incident pump traverses the metasurface up to 9 passes. Results are found to agree well with a simple model developed to estimate the generated SHG signals. We also discuss strategies to further scale-up the nonlinear signal generation. Our approach provides a clear pathway to enhance nonlinear optical responses of metasurface-based devices. The generic nature of our approach holds promise for diverse applications in nonlinear optics and photonics.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Post-2000 Nonlinear Optical Materials and Measurements: Data Tables and Best Practices
Authors:
Nathalie Vermeulen,
Daniel Espinosa,
Adam Ball,
John Ballato,
Philippe Boucaud,
Georges Boudebs,
Cecilia L. A. V. Campos,
Peter Dragic,
Anderson S. L. Gomes,
Mikko J. Huttunen,
Nathaniel Kinsey,
Rich Mildren,
Dragomir Neshev,
Lazaro Padilha,
Minhao Pu,
Ray Secondo,
Eiji Tokunaga,
Dmitry Turchinovich,
**gshi Yan,
Kresten Yvind,
Ksenia Dolgaleva,
Eric W. Van Stryland
Abstract:
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are represen…
▽ More
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are representative experimental works on bulk materials, solvents, 0D-1D-2D materials, metamaterials, fiber waveguiding materials, on-chip waveguiding materials, hybrid waveguiding systems, and materials suitable for nonlinear optics at THz frequencies. In addition to the data tables, we also provide best practices for performing and reporting nonlinear-optical experiments. These best practices underpin the selection process that was used for including papers in the tables. While the tables indeed show strong advancements in the field over the past two decades, we encourage the nonlinear-optics community to implement the identified best practices in future works. This will allow a more adequate comparison, interpretation and use of the published parameters, and as such further stimulate the overall progress in nonlinear-optical science and applications.
△ Less
Submitted 21 May, 2023; v1 submitted 15 January, 2023;
originally announced January 2023.
-
On the Automated Detection of Corneal Edema with Second Harmonic Generation Microscopy and Deep Learning
Authors:
Stefan R. Anton,
Rosa M. Martínez-Ojeda,
Radu Hristu,
George A. Stanciu,
Antonela Toma,
Cosmin K. Banica,
Enrique J. Fernández,
Mikko Huttunen,
Juan M. Bueno,
Stefan G. Stanciu
Abstract:
When the cornea becomes hydrated above its physiologic level it begins to significantly scatter light, loosing transparency and thus impairing eyesight. This condition, known as corneal edema, can be associated with different causes, such as corneal scarring, corneal infection, corneal inflammation, and others, making it difficult to diagnose and quantify. Previous works have shown that Second Har…
▽ More
When the cornea becomes hydrated above its physiologic level it begins to significantly scatter light, loosing transparency and thus impairing eyesight. This condition, known as corneal edema, can be associated with different causes, such as corneal scarring, corneal infection, corneal inflammation, and others, making it difficult to diagnose and quantify. Previous works have shown that Second Harmonic Generation Microscopy (SHG) represents a valuable non-linear optical imaging tool to non-invasively identify and monitor changes in the collagen architecture of the cornea, potentially playing a pivotal role in future in-vivo cornea diagnostic methods. However, the interpretation of SHG data can pose significant problems when transferring such approaches to clinical settings, given the low availability of public data sets, and training resources. In this work we explore the use of three Deep Learning models, the highly popular InceptionV3 and ResNet50, alongside FLIMBA, a custom developed architecture, requiring no pre-training, to automatically detect corneal edema in SHG images of porcine cornea. We discuss and evaluate data augmentation strategies tuned to the specifics of the herein addressed application and observe that Deep Learning models building on different architectures provide complementary results. Importantly, we observe that the combined use of such complementary models boosts the overall classification performance in the case of differentiating edematous and healthy corneal tissues, up to an AU-ROC=0.98. These results have potential to be extrapolated to other diagnostics scenarios, such as differentiation of corneal edema in different stages, automated extraction of hydration level of cornea, or automated identification of corneal edema causes, and thus pave the way for novel methods for cornea diagnostics with Deep-Learning assisted non-linear optical imaging.
△ Less
Submitted 14 November, 2022; v1 submitted 1 October, 2022;
originally announced October 2022.
-
DeepTx: Deep Learning Beamforming with Channel Prediction
Authors:
Janne M. J. Huttunen,
Dani Korpi,
Mikko Honkala
Abstract:
Machine learning algorithms have recently been considered for many tasks in the field of wireless communications. Previously, we have proposed the use of a deep fully convolutional neural network (CNN) for receiver processing and shown it to provide considerable performance gains. In this study, we focus on machine learning algorithms for the transmitter. In particular, we consider beamforming and…
▽ More
Machine learning algorithms have recently been considered for many tasks in the field of wireless communications. Previously, we have proposed the use of a deep fully convolutional neural network (CNN) for receiver processing and shown it to provide considerable performance gains. In this study, we focus on machine learning algorithms for the transmitter. In particular, we consider beamforming and propose a CNN which, for a given uplink channel estimate as input, outputs downlink channel information to be used for beamforming. The CNN is trained in a supervised manner considering both uplink and downlink transmissions with a loss function that is based on UE receiver performance. The main task of the neural network is to predict the channel evolution between uplink and downlink slots, but it can also learn to handle inefficiencies and errors in the whole chain, including the actual beamforming phase. The provided numerical experiments demonstrate the improved beamforming performance.
△ Less
Submitted 12 July, 2022; v1 submitted 16 February, 2022;
originally announced February 2022.
-
Waveform Learning for Reduced Out-of-Band Emissions Under a Nonlinear Power Amplifier
Authors:
Dani Korpi,
Mikko Honkala,
Janne M. J. Huttunen,
Fayçal Ait Aoudia,
Jakob Hoydis
Abstract:
Machine learning (ML) has shown great promise in optimizing various aspects of the physical layer processing in wireless communication systems. In this paper, we use ML to learn jointly the transmit waveform and the frequency-domain receiver. In particular, we consider a scenario where the transmitter power amplifier is operating in a nonlinear manner, and ML is used to optimize the waveform to mi…
▽ More
Machine learning (ML) has shown great promise in optimizing various aspects of the physical layer processing in wireless communication systems. In this paper, we use ML to learn jointly the transmit waveform and the frequency-domain receiver. In particular, we consider a scenario where the transmitter power amplifier is operating in a nonlinear manner, and ML is used to optimize the waveform to minimize the out-of-band emissions. The system also learns a constellation shape that facilitates pilotless detection by the simultaneously learned receiver. The simulation results show that such an end-to-end optimized system can communicate data more accurately and with less out-of-band emissions than conventional systems, thereby demonstrating the potential of ML in optimizing the air interface. To the best of our knowledge, there are no prior works considering the power amplifier induced emissions in an end-to-end learned system. These findings pave the way towards an ML-native air interface, which could be one of the building blocks of 6G.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Fourier-Engineered Plasmonic Lattice Resonances
Authors:
Theng-Loo Lim,
Yaswant Vaddi,
M. Saad Bin-Alam,
Lin Cheng,
Rasoul Alaee,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Orad Reshef,
Robert W. Boyd
Abstract:
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the c…
▽ More
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the concept of Fourier lattice resonances (FLRs) in which multiple desired resonances can be chosen a priori and used to dictate the metasurface design. Because each resonance is supported by a distinct surface lattice mode, each can have a high quality factor. Here, we experimentally demonstrate several metasurfaces with arbitrarily placed resonances (e.g., at 1310 and 1550 nm) and Q-factors as high as 800 in a plasmonic platform. This flexible procedure requires only the computation of a single Fourier transform for its design, and is based on standard lithographic fabrication methods, allowing one to design and fabricate a metasurface to fit any specific, optical-cavity-based application. This work represents an important milestone towards the complete control over the transmission spectrum of a metasurface.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Thermal Control of Plasmonic Surface Lattice Resonances
Authors:
Jussi Kelavuori,
Viatcheslav Vanyukov,
Timo Stolt,
Petri Karvinen,
Heikki Rekola,
Tommi K. Hakala,
Mikko J. Huttunen
Abstract:
Plasmonic metasurfaces exhibiting collective responses known as surface lattice resonances (SLRs) show potential for realizing tunable and flat photonic components for wavelength-selective processes, including lasing and optical nonlinearities. However, post-fabrication tuning of SLRs remains challenging, limiting the applicability of SLR-based components. Here, we demonstrate how the properties o…
▽ More
Plasmonic metasurfaces exhibiting collective responses known as surface lattice resonances (SLRs) show potential for realizing tunable and flat photonic components for wavelength-selective processes, including lasing and optical nonlinearities. However, post-fabrication tuning of SLRs remains challenging, limiting the applicability of SLR-based components. Here, we demonstrate how the properties of high quality factor SLRs are easily modified by breaking the symmetry of the nanoparticle surroundings. We break the symmetry by changing the refractive index of the overlying immersion oil simply by controlling the ambient temperature of the device. We show that already modest temperature changes of 10°C can increase the quality factor of the investigated SLR from 400 to 750. Our results demonstrate accurate and reversible modification of the properties of the SLRs, paving the way towards tunable SLR-based photonic devices. On a more general level, our results demonstrate how symmetry breaking of the surrounding dielectric environment can be utilized for efficient and potentially ultrafast modification of the SLR properties.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Cross-polarized surface lattice resonances in a rectangular lattice plasmonic metasurface
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Raja Naeem Ahmad,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree…
▽ More
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree of freedom where different lattice modes propagate along different dimensions of the lattice. The surface consists of aluminum nanostructures in a rectangular periodic lattice. The resulting surface lattice resonances were measured around 630 nm and 1160 nm with Q-factors of ~50 and ~800, respectively. The latter is a record-high plasmonic Q-factor within the near-infrared type-II window. Such metasurfaces could benefit applications such as frequency conversion and all-optical switching.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Broadband frequency conversion of ultrashort pulses using high-$Q$ metasurface cavities
Authors:
Timo Stolt,
Mikko J. Huttunen
Abstract:
Frequency conversion of light can be dramatically enhanced using high quality factor ($Q$-factor) cavities. Unfortunately, the achievable conversion efficiencies and conversion bandwidths are fundamentally limited by the time-bandwidth limit of the cavity, restricting their use in frequency conversion of ultrashort pulses. Here, we propose and numerically demonstrate sum-frequency generation based…
▽ More
Frequency conversion of light can be dramatically enhanced using high quality factor ($Q$-factor) cavities. Unfortunately, the achievable conversion efficiencies and conversion bandwidths are fundamentally limited by the time-bandwidth limit of the cavity, restricting their use in frequency conversion of ultrashort pulses. Here, we propose and numerically demonstrate sum-frequency generation based frequency conversion using a metasurface-based cavity configuration that could overcome this limitation. The proposed experimental configuration takes use of the spatially dispersive responses of periodic metasurfaces supporting collective surface lattice resonances (SLRs), and can be utilized for broadband frequency conversion of ultrashort pulses. We investigate a plasmonic metasurface, supporting a high-$Q$ SLR ($Q$=500, linewidth of 2 nm) centred near 1000 nm, and demonstrate ~1000-fold enhancements of nonlinear signals. Furthermore, we demonstrate broadband frequency conversion with a pump conversion bandwidth reaching 75 nm, a value that greatly surpasses the linewidth of the studied cavity. Our work opens new avenues to utilize high-$Q$ metasurfaces also for broadband frequency conversion of light.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
HybridDeepRx: Deep Learning Receiver for High-EVM Signals
Authors:
Jaakko Pihlajasalo,
Dani Korpi,
Mikko Honkala,
Janne M. J. Huttunen,
Taneli Riihonen,
Jukka Talvitie,
Alberto Brihuega,
Mikko A. Uusitalo,
Mikko Valkama
Abstract:
In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the…
▽ More
In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Multiply-resonant Second-harmonic Generation using Surface Lattice Resonances in Aluminum Metasurfaces
Authors:
Timo Stolt,
Anna Vesala,
Heikki Rekola,
Petri Karvinen,
Tommi K. Hakala,
Mikko J. Huttunen
Abstract:
Nonlinear metamaterials show potential for realizing flat nonlinear optical devices but generally lack in terms of achievable conversion efficiencies. Recent work has focused on enhancing nonlinear processes by utilizing high quality factor resonances, such as collective responses known as surface lattice resonances (SLRs) taking place in periodic metal nanoparticle arrays. Here, we investigate ho…
▽ More
Nonlinear metamaterials show potential for realizing flat nonlinear optical devices but generally lack in terms of achievable conversion efficiencies. Recent work has focused on enhancing nonlinear processes by utilizing high quality factor resonances, such as collective responses known as surface lattice resonances (SLRs) taking place in periodic metal nanoparticle arrays. Here, we investigate how the dispersive nature of SLRs affects the nonlinear responses of SLR-supporting metasurfaces. Particularly, we measure second-harmonic generation from aluminum nanoparticle arrays and demonstrate that by tilting the sample along two orthogonal directions, the sample can be made multiply-resonant for several pump and second-harmonic signal wavelength combinations. Characterized metasurfaces are estimated to exhibit a second-order susceptibility value of 0.40 pm/V, demonstrating aluminum as a potential material for nonlinear metasurfaces.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Spectral Vector Beams for High-Speed Spectroscopic Measurements
Authors:
Lea Kopf,
Juan R. Deop Ruano,
Markus Hiekkamäki,
Timo Stolt,
Mikko J. Huttunen,
Frédéric Bouchard,
Robert Fickler
Abstract:
Structured light harnessing multiple degrees of freedom has become a powerful approach to use complex states of light in fundamental studies and applications. Here, we investigate the light field of an ultrafast laser beam with a wavelength-depended polarization state, a beam we term spectral vector beam. We demonstrate a simple technique to generate and tune such structured beams and demonstrate…
▽ More
Structured light harnessing multiple degrees of freedom has become a powerful approach to use complex states of light in fundamental studies and applications. Here, we investigate the light field of an ultrafast laser beam with a wavelength-depended polarization state, a beam we term spectral vector beam. We demonstrate a simple technique to generate and tune such structured beams and demonstrate their spectroscopic capabilities. By only measuring the polarization state using fast photodetectors, it is possible to track pulse-to-pulse changes in the frequency spectrum caused by, e.g. narrowband transmission or absorption. In our experiments, we reach read-out rates of around 6 MHz, which is limited by our technical ability to modulate the spectrum and can in principle reach GHz read-out rates. In simulations we extend the spectral range to more than 1000 nm by using a supercontinuum light source, thereby paving the way to various applications requiring high-speed spectroscopic measurements.
△ Less
Submitted 17 March, 2021; v1 submitted 4 March, 2021;
originally announced March 2021.
-
DeepRx MIMO: Convolutional MIMO Detection with Learned Multiplicative Transformations
Authors:
Dani Korpi,
Mikko Honkala,
Janne M. J. Huttunen,
Vesa Starck
Abstract:
Recently, deep learning has been proposed as a potential technique for improving the physical layer performance of radio receivers. Despite the large amount of encouraging results, most works have not considered spatial multiplexing in the context of multiple-input and multiple-output (MIMO) receivers. In this paper, we present a deep learning-based MIMO receiver architecture that consists of a Re…
▽ More
Recently, deep learning has been proposed as a potential technique for improving the physical layer performance of radio receivers. Despite the large amount of encouraging results, most works have not considered spatial multiplexing in the context of multiple-input and multiple-output (MIMO) receivers. In this paper, we present a deep learning-based MIMO receiver architecture that consists of a ResNet-based convolutional neural network, also known as DeepRx, combined with a so-called transformation layer, all trained together. We propose two novel alternatives for the transformation layer: a maximal ratio combining-based transformation, or a fully learned transformation. The former relies more on expert knowledge, while the latter utilizes learned multiplicative layers. Both proposed transformation layers are shown to clearly outperform the conventional baseline receiver, especially with sparse pilot configurations. To the best of our knowledge, these are some of the first results showing such high performance for a fully learned MIMO receiver.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Hyperpolarizability of plasmonic meta-atoms in metasurfaces
Authors:
M. Saad Bin-Alam,
Joshua Baxter,
Kashif M. Awan,
Antti Kiviniemi,
Yaryna Mamchur,
Antonio Cala' Lesina,
Kosmas L. Tsakmakidis,
Mikko J. Huttunen,
Lora Ramunno,
Ksenia Dolgaleva
Abstract:
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (…
▽ More
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (hyperpolarizabilities) of the meta-atoms hindering designing of nonlinear metasurfaces. Here, we develop the equivalent RLC circuit model of such meta-atoms to estimate their second-order nonlinear optical parameter i.e. the first-order hyperpolarizability in the optical spectral range. In parallel, we extract from second-harmonic generation experiments the spectrum of the 1st-order hyperpolarizabilities of individual meta-atoms consisting of asymmetrically shaped (elongated) plasmonic nanoprisms. Moreover, we verify our results using nonlinear hydrodynamic-FDTD and with calculations based on nonlinear scattering theory. All three approaches: analytical, experimental, and computational, yield results that agree very well. Our empirical RLC model can thus be used as a simple tool to enable efficient design of nonlinear plasmonic metasurfaces.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Backward phase-matched second-harmonic generation from stacked metasurfaces
Authors:
Timo Stolt,
Jeonghyun Kim,
Sébastien Héron,
Anna Vesala,
Mikko. J. Huttunen,
Robert Czaplicki,
Martti Kauranen,
Junsuk Rho,
Patrice Genevet
Abstract:
We demonstrate phase-matched second-harmonic generation (SHG) from three-dimensional metamaterials consisting of stacked metasurfaces. To achieve phase matching, we utilize a novel mechanism based on phase engineering of the metasurfaces at the interacting wavelengths, facilitating phase-matched SHG in the unconventional backward direction. By stacking up to five metasurfaces, we obtain the expect…
▽ More
We demonstrate phase-matched second-harmonic generation (SHG) from three-dimensional metamaterials consisting of stacked metasurfaces. To achieve phase matching, we utilize a novel mechanism based on phase engineering of the metasurfaces at the interacting wavelengths, facilitating phase-matched SHG in the unconventional backward direction. By stacking up to five metasurfaces, we obtain the expected factor of 25 enhancement in SHG efficiency. Our results motivate further investigations to achieve higher conversion efficiencies also with more complex wavefronts.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Transient perturbative nonlinear responses of plasmonic materials
Authors:
Mikko J. Huttunen,
Jussi Kelavuori,
Marco Ornigotti
Abstract:
Recent investigations on optical nonlinearities of plasmonic materials suggest their responses may be even beyond the usual perturbative description. To better understand these surprisingly strong responses, we develop here a simple but general approach to describe the nonlinear optical response of plasmonic materials up to $n$th perturbation order. We apply the approach to understand spectral bro…
▽ More
Recent investigations on optical nonlinearities of plasmonic materials suggest their responses may be even beyond the usual perturbative description. To better understand these surprisingly strong responses, we develop here a simple but general approach to describe the nonlinear optical response of plasmonic materials up to $n$th perturbation order. We apply the approach to understand spectral broadening occurring in resonant metasurfaces and investigate the enhancement of high-harmonic generation from multiply-resonant metasurfaces, predicting an over million-fold enhancement of higher harmonics.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
DeepRx: Fully Convolutional Deep Learning Receiver
Authors:
Mikko Honkala,
Dani Korpi,
Janne M. J. Huttunen
Abstract:
Deep learning has solved many problems that are out of reach of heuristic algorithms. It has also been successfully applied in wireless communications, even though the current radio systems are well-understood and optimal algorithms exist for many tasks. While some gains have been obtained by learning individual parts of a receiver, a better approach is to jointly learn the whole receiver. This, h…
▽ More
Deep learning has solved many problems that are out of reach of heuristic algorithms. It has also been successfully applied in wireless communications, even though the current radio systems are well-understood and optimal algorithms exist for many tasks. While some gains have been obtained by learning individual parts of a receiver, a better approach is to jointly learn the whole receiver. This, however, often results in a challenging nonlinear problem, for which the optimal solution is infeasible to implement. To this end, we propose a deep fully convolutional neural network, DeepRx, which executes the whole receiver pipeline from frequency domain signal stream to uncoded bits in a 5G-compliant fashion. We facilitate accurate channel estimation by constructing the input of the convolutional neural network in a very specific manner using both the data and pilot symbols. Also, DeepRx outputs soft bits that are compatible with the channel coding used in 5G systems. Using 3GPP-defined channel models, we demonstrate that DeepRx outperforms traditional methods. We also show that the high performance can likely be attributed to DeepRx learning to utilize the known constellation points of the unknown data symbols, together with the local symbol distribution, for improved detection accuracy.
△ Less
Submitted 12 January, 2021; v1 submitted 4 May, 2020;
originally announced May 2020.
-
Ultra-high-Q resonances in plasmonic metasurfaces
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Yaryna Mamchur,
M. Zahirul Alam,
Graham Carlow,
Jeremy Upham,
Brian T. Sullivan,
Jean-Michel Ménard,
Mikko J. Huttunen,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g.…
▽ More
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g., dielectrics) that provide weaker field enhancement, but more tolerable losses. Here, we report a plasmonic metasurface with a quality-factor (Q-factor) of 2340 in the telecommunication C band by exploiting surface lattice resonances (SLRs), exceeding the record by an order of magnitude. Additionally, we show that SLRs retain many of the same benefits as localized plasmonic resonances, such as field enhancement and strong confinement of light along the metal surface. Our results demonstrate that SLRs provide an exciting and unexplored method to tailor incident light fields, and could pave the way to flexible wavelength-scale devices for any optical resonating application.
△ Less
Submitted 24 February, 2021; v1 submitted 10 April, 2020;
originally announced April 2020.
-
A Bayesian-based approach to improving acoustic Born waveform inversion of seismic data for viscoelastic media
Authors:
Kenneth Muhumuza,
Lassi Roininen,
Janne M. J. Huttunen,
Timo Lähivaara
Abstract:
In seismic waveform inversion, the reconstruction of the subsurface properties is usually carried out using approximative wave propagation models to ensure computational efficiency. The viscoelastic nature of the subsurface is often unaccounted for, and two popular approximations--the acoustic and linearized Born inversion--are widely used. This leads to reconstruction errors since the approximati…
▽ More
In seismic waveform inversion, the reconstruction of the subsurface properties is usually carried out using approximative wave propagation models to ensure computational efficiency. The viscoelastic nature of the subsurface is often unaccounted for, and two popular approximations--the acoustic and linearized Born inversion--are widely used. This leads to reconstruction errors since the approximations ignore realistic (physical) aspects of seismic wave propagation in the heterogeneous earth. In this study, we show that the Bayesian approximation error approach can be used to partially recover from errors, addressing elastic and viscous effects in acoustic Born inversion for viscoelastic media. The results of numerical examples indicate that neglecting the modelling errors induced by the approximations results in very poor recovery of the subsurface velocity fields.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Multi-resonant high-Q plasmonic metasurfaces
Authors:
Orad Reshef,
Md Saad-Bin-Alam,
Mikko J. Huttunen,
Graham Carlow,
Brian T. Sullivan,
Jean-Michel Ménard,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
Resonant metasurfaces are devices composed of nanostructured sub-wavelength scatterers that generate narrow optical resonances, enabling applications in filtering, nonlinear optics, and molecular fingerprinting. It is highly desirable for these applications to incorporate such devices with multiple, high-quality-factor resonances; however, it can be challenging to obtain more than a pair of narrow…
▽ More
Resonant metasurfaces are devices composed of nanostructured sub-wavelength scatterers that generate narrow optical resonances, enabling applications in filtering, nonlinear optics, and molecular fingerprinting. It is highly desirable for these applications to incorporate such devices with multiple, high-quality-factor resonances; however, it can be challenging to obtain more than a pair of narrow resonances in a single plasmonic surface. Here, we demonstrate a multi-resonant metasurface that operates by extending the functionality of surface lattice resonances, which are the collective responses of arrays of metallic nanoparticles. This device features a series of resonances with high quality factors (Q ~ 40), an order of magnitude larger than what is typically achievable with plasmonic nanoparticles, as well as a narrow free spectral range. This design methodology can be used to better tailor the transmission spectrum of resonant metasurfaces and represents an important step towards the miniaturization of optical devices.
△ Less
Submitted 15 August, 2019; v1 submitted 30 June, 2019;
originally announced July 2019.
-
Improving pulse transit time estimation of aortic PWV and blood pressure using machine learning and simulated training data
Authors:
Janne M. J. Huttunen,
Leo Kärkkäinen,
Harri Lindholm
Abstract:
Recent developments in cardiovascular modelling allow us to simulate blood flow in an entire human body. Such model can also be used to create databases of virtual subjects, with sizes limited only by computational resources. In this work, we study if it is possible to estimate cardiovascular health indices using machine learning approaches. In particular, we carry out theoretical assessment of es…
▽ More
Recent developments in cardiovascular modelling allow us to simulate blood flow in an entire human body. Such model can also be used to create databases of virtual subjects, with sizes limited only by computational resources. In this work, we study if it is possible to estimate cardiovascular health indices using machine learning approaches. In particular, we carry out theoretical assessment of estimating aortic pulse wave velocity, diastolic and systolic blood pressure and stroke volume using pulse transit/arrival timings derived from photopletyshmography signals. For predictions, we train Gaussian process regression using a database of virtual subjects generated with a cardiovascular simulator. Simulated results provides theoretical assessment of accuracy for predictions of the health indices. For instance, aortic pulse wave velocity can be estimated with a high accuracy (r>0.9) when photopletyshmography is measured from left carotid artery using a combination of foot-to-foot pulse transmit time and peak location derived for the predictions. Similar accuracy can be reached for diastolic blood pressure, but predictions of systolic blood pressure are less accurate (r>0.75) and the stroke volume predictions are mostly contributed by heart rate.
△ Less
Submitted 18 June, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Less is more - enhancement of second-harmonic generation from metasurfaces by reduced nanoparticle density
Authors:
Robert Czaplicki,
Antti Kiviniemi,
Mikko J. Huttunen,
Xiaorun Zang,
Timo Stolt,
Ismo Vartiainen,
Jérémy Butet,
Markku Kuittinen,
Olivier J. F. Martin,
Martti Kauranen
Abstract:
We investigate optical second-harmonic generation (SHG) from metasurfaces where noncentrosymmetric V-shaped gold nanoparticles are ordered into regular array configurations. In contrast to expectations, a substantial enhancement of the SHG signal is observed when the number density of the particles in the array is reduced. More specifically, by halving the number density, we obtain over five-fold…
▽ More
We investigate optical second-harmonic generation (SHG) from metasurfaces where noncentrosymmetric V-shaped gold nanoparticles are ordered into regular array configurations. In contrast to expectations, a substantial enhancement of the SHG signal is observed when the number density of the particles in the array is reduced. More specifically, by halving the number density, we obtain over five-fold enhancement in SHG intensity. This striking result is attributed to favorable interparticle interactions mediated by the lattice, where surface-lattice resonances lead to spectral narrowing of the plasmon resonances. Importantly, however, the results cannot be explained by the improved quality of the plasmon resonance alone. Instead, the lattice interactions also lead to further enhancement of the local fields at the particles. The experimental observations agree very well with results obtained from numerical simulations including lattice interactions.
△ Less
Submitted 20 August, 2018;
originally announced August 2018.
-
Estimation of groundwater storage from seismic data using deep learning
Authors:
Timo Lähivaara,
Alireza Malehmir,
Antti Pasanen,
Leo Kärkkäinen,
Janne M. J. Huttunen,
Jan S. Hesthaven
Abstract:
Convolutional neural networks can provide a potential framework to characterize groundwater storage from seismic data. Estimation of key components such as the amount of groundwater stored in an aquifer and delineate water-table level, from active-source seismic data are investigated in this study. The data to train, validate, and test the neural networks are obtained by solving wave propagation i…
▽ More
Convolutional neural networks can provide a potential framework to characterize groundwater storage from seismic data. Estimation of key components such as the amount of groundwater stored in an aquifer and delineate water-table level, from active-source seismic data are investigated in this study. The data to train, validate, and test the neural networks are obtained by solving wave propagation in a coupled poroviscoelastic-elastic media. A discontinuous Galerkin method is applied to model wave propagation whereas a deep convolutional neural network is used for the parameter estimation problem. In the numerical experiment, the primary unknowns are the amount of stored groundwater and water-table level, and are estimated, while the remaining parameters, assumed to be of less of interest, are marginalized in the convolutional neural networks-based solution. Results, obtained through synthetic data, illustrate the potential of deep learning methods to extract additional aquifer information from seismic data, which otherwise would be impossible based on a set of reflection seismic sections or velocity tomograms.
△ Less
Submitted 23 June, 2019; v1 submitted 21 June, 2018;
originally announced June 2018.
-
Demonstration of Optical Nonlinearity in InGaAsP/InP Passive Waveguides
Authors:
Shayan Saeidi,
Payman Rasekh,
Kashif M. Awan,
Alperen Tüğen,
Mikko J. Huttunen,
Ksenia Dolgaleva
Abstract:
We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonl…
▽ More
We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonlinear phase shift of up to $2.5π$ has been observed in self-phase modulation experiments. The measured value of the two-photon absorption coefficient $α_2$ was 15 cm/GW. The four-wave mixing conversion range, representing the wavelength difference between maximally separated signal and idler spectral components, was observed to be 45 nm. Our results indicate that InGaAsP has a high potential as a material platform for nonlinear photonic devices, provided that the operation wavelength range outside the two-photon absorption window is selected.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Using surface lattice resonances to engineer nonlinear optical processes in metal nanoparticle arrays
Authors:
Mikko J. Huttunen,
Payman Rasekh,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Collective responses of localized surface plasmon resonances, known as surface lattice resonances (SLRs) in metal nanoparticle arrays, can lead to high quality factors (~100), large local-field enhancements and strong light-matter interactions. SLRs have found many applications in linear optics, but little work of the influence of SLRs on nonlinear optics has been reported. Here we show how SLRs c…
▽ More
Collective responses of localized surface plasmon resonances, known as surface lattice resonances (SLRs) in metal nanoparticle arrays, can lead to high quality factors (~100), large local-field enhancements and strong light-matter interactions. SLRs have found many applications in linear optics, but little work of the influence of SLRs on nonlinear optics has been reported. Here we show how SLRs could be utilized to enhance nonlinear optical interactions. We devote special attention to the sum-frequency, difference-frequency, and third-harmonic generation processes because of their potential for the realization of novel sources of light. We also demonstrate how such arrays could be engineered to enhance higher-order nonlinear optical interactions through cascaded nonlinear processes. In particular, we demonstrate how the efficiency of third-harmonic generation could be engineered via cascaded second-order responses.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Deep convolutional neural networks for estimating porous material parameters with ultrasound tomography
Authors:
Timo Lähivaara,
Leo Kärkkäinen,
Janne M. J. Huttunen,
Jan S. Hesthaven
Abstract:
We study the feasibility of data based machine learning applied to ultrasound tomography to estimate water-saturated porous material parameters. In this work, the data to train the neural networks is simulated by solving wave propagation in coupled poroviscoelastic-viscoelastic-acoustic media. As the forward model, we consider a high-order discontinuous Galerkin method while deep convolutional neu…
▽ More
We study the feasibility of data based machine learning applied to ultrasound tomography to estimate water-saturated porous material parameters. In this work, the data to train the neural networks is simulated by solving wave propagation in coupled poroviscoelastic-viscoelastic-acoustic media. As the forward model, we consider a high-order discontinuous Galerkin method while deep convolutional neural networks are used to solve the parameter estimation problem. In the numerical experiment, we estimate the material porosity and tortuosity while the remaining parameters which are of less interest are successfully marginalized in the neural networks-based inversion. Computational examples confirms the feasibility and accuracy of this approach.
△ Less
Submitted 26 February, 2018; v1 submitted 26 September, 2017;
originally announced September 2017.
-
Cauchy difference priors for edge-preserving Bayesian inversion with an application to X-ray tomography
Authors:
Markku Markkanen,
Lassi Roininen,
Janne M J Huttunen,
Sari Lasanen
Abstract:
We study Cauchy-distributed difference priors for edge-preserving Bayesian statistical inverse problems. On the contrary to the well-known total variation priors, one-dimensional Cauchy priors are non-Gaussian priors also in the discretization limit. Cauchy priors have independent and identically distributed increments. One-dimensional Cauchy and Gaussian random walks are special cases of Lévy…
▽ More
We study Cauchy-distributed difference priors for edge-preserving Bayesian statistical inverse problems. On the contrary to the well-known total variation priors, one-dimensional Cauchy priors are non-Gaussian priors also in the discretization limit. Cauchy priors have independent and identically distributed increments. One-dimensional Cauchy and Gaussian random walks are special cases of Lévy $α$-stable random walks with $α=1$ and $α=2$, respectively. Both random walks can be written in closed-form, and as priors, they provide smoothing and edge-preserving properties. We briefly discuss also continuous and discrete Lévy $α$-stable random walks, and generalize the methodology to two-dimensional priors.
We apply the developed algorithm to one-dimensional deconvolution and two-dimensional X-ray tomography problems. We compute conditional mean estimates with single-component Metropolis-Hastings and maximum a posteriori estimates with Gauss-Newton-type optimization method. We compare the proposed tomography reconstruction method to filtered back-projection estimate and conditional mean estimates with Gaussian and total variation priors.
△ Less
Submitted 19 March, 2016;
originally announced March 2016.
-
Elliptic boundary value problems with Gaussian white noise loads
Authors:
Sari Lasanen,
Lassi Roininen,
Janne M. J. Huttunen
Abstract:
Linear second order elliptic boundary value problems (BVP) on bounded Lipschitz domains are studied in the case of Gaussian white noise loads. Especially, Neumann and Robin BVPs are considered.
The main obstacle for applying the usual variational approach is that the Gaussian white noise has irregular realizations. In particular, the corresponding Neumann boundary values are not well-defined in…
▽ More
Linear second order elliptic boundary value problems (BVP) on bounded Lipschitz domains are studied in the case of Gaussian white noise loads. Especially, Neumann and Robin BVPs are considered.
The main obstacle for applying the usual variational approach is that the Gaussian white noise has irregular realizations. In particular, the corresponding Neumann boundary values are not well-defined in the ordinary sense.
In this work, the BVP is reformulated by replacing the continuity of the boundary trace map** with measurability. Instead of using variational methods alone, the reformulation of the BVP derives also from Cameron-Martin space techniques. The reformulation essentially returns the study of irregular white noise loads to study of $L^2$-loads.
Admissibility of the reformulation is demonstrated by showing that usual finite element approximations of the BVP with discretized white noise loads converge to the solution of the reformulated problem. For Neumann and Robin BVPs, the finite dimensional approximations have been utilized before. However, here also the infinite-dimensional limit is considered.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
Resonant second-harmonic-generation circular-dichroism microscopy reveals molecular chirality in native biological tissues
Authors:
Mei-Yu Chen,
Mikko J. Huttunen,
Che-Wei Kan,
Yen-Yin Lin,
Cin-Wei Ye,
Meng-Jer Wu,
Hsiang-Lin Liu,
Shi-Wei Chu
Abstract:
Conventional linear optical activity effects are widely used for studying chiral materials. However, poor contrast and artifacts due to sample anisotropy limit the applicability of these methods. Here we demonstrate that nonlinear second-harmonic-generation circular dichroism spectral microscopy can overcome these limits. In intact collagenous tissues, clear spectral resonance is observed with sub…
▽ More
Conventional linear optical activity effects are widely used for studying chiral materials. However, poor contrast and artifacts due to sample anisotropy limit the applicability of these methods. Here we demonstrate that nonlinear second-harmonic-generation circular dichroism spectral microscopy can overcome these limits. In intact collagenous tissues, clear spectral resonance is observed with sub-micrometer spatial resolution. By performing gradual protein denaturation studies, we show that the resonant responses are dominantly due to the molecular chirality.
△ Less
Submitted 15 February, 2016;
originally announced February 2016.
-
Measurement of optical second-harmonic generation from an individual single-walled carbon nanotube
Authors:
M. J. Huttunen,
O. Herranen,
A. Johansson,
H. Jiang,
P. R. Mudimela,
P. Myllyperkiö,
G. Bautista,
A. G. Nasibulin,
E. I. Kauppinen,
M. Ahlskog,
M. Kauranen,
M. Pettersson
Abstract:
We show that optical second-harmonic generation (SHG) can be observed from individual single-walled carbon nanotubes (SWCNTs) and, furthermore, allows imaging of individual tubes. Detailed analysis of our results suggests that the structural noncentrosymmetry, as required for SHG, arises from the non-zero chiral angle of the SWCNT. SHG thus has potential as a fast, non-destructive, and simple meth…
▽ More
We show that optical second-harmonic generation (SHG) can be observed from individual single-walled carbon nanotubes (SWCNTs) and, furthermore, allows imaging of individual tubes. Detailed analysis of our results suggests that the structural noncentrosymmetry, as required for SHG, arises from the non-zero chiral angle of the SWCNT. SHG thus has potential as a fast, non-destructive, and simple method for imaging of individual nanomolecules and for probing their chiral properties. Even more, it opens the possibility to optically determine the handedness of individual SWCNTs.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.