-
Which Ion Dominates Temperature and Pressure Response of Halide Perovskites and Elpasolites?
Authors:
Loreta A. Muscarella,
Huygen J. Jöbsis,
Bettina Baumgartner,
P. Tim Prins,
D. Nicolette Maaskant,
Andrei V. Petukhov,
Dmitry Chernyshov,
Charles J. McMonagle,
Eline M. Hutter
Abstract:
Halide perovskite and elpasolite semiconductors are extensively studied for optoelectronic applications due to their excellent performance together with significant chemical and structural flexibility. However, there is still limited understanding of their basic elastic properties and how they vary with composition and temperature, which is relevant for synthesis and device operation. To address t…
▽ More
Halide perovskite and elpasolite semiconductors are extensively studied for optoelectronic applications due to their excellent performance together with significant chemical and structural flexibility. However, there is still limited understanding of their basic elastic properties and how they vary with composition and temperature, which is relevant for synthesis and device operation. To address this, we performed temperature- and pressure-dependent synchrotron-based powder X-ray diffraction (XRD). In contrast to previous pressure-dependent XRD studies, our relatively low pressures (ambient to 0.06 GPa) enabled us to investigate the elastic properties of halide perovskites and elpasolites in their ambient crystal structure. We find that halide perovskites and elpasolites show common trends in the bulk modulus and thermal expansivity. Both materials become softer as the halide ionic radius increases from Cl to Br to I, exhibiting higher compressibility and larger thermal expansivity. The mixed-halide compositions show intermediate properties to the pure compounds. Contrary, cations show a minor effect on the elastic properties. Finally, we observe that thermal phase transitions in e.g., MAPbI3 and CsPbCl3 lead to a softening of the lattice, together with negative expansivity for certain crystal axes, already tens of degrees away from the transition temperature. Hence, the range in which the phase transition affects thermal and elastic properties is substantially broader than previously thought. These findings highlight the importance of considering the temperature-dependent elastic properties of these materials, since stress induced during manufacturing or temperature sweeps can significantly impact the stability and performance of the corresponding devices.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Conduction band tuning by controlled alloying of Fe into Cs2AgBiBr6 double perovskite powders
Authors:
Huygen J. Jobsis,
Kostas Fykouras,
Joost W. C. Reinders,
Jacco van Katwijk,
Joren M. Dorresteijn,
Tjom Arens,
Ina Vollmer,
Loreta A. Muscarella,
Linn Leppert,
Eline M. Hutter
Abstract:
Halide double perovskite semiconductors such as Cs2AgBiBr6 are widely investigated as a more stable, less toxic alternative to lead-halide perovskites in light conversion applications including photovoltaics and photoredox catalysis. However, the relatively large and indirect bandgap of Cs2AgBiBr6 limits efficient sunlight absorption. Here, we show that controlled replacement of Bi3+ with Fe3+ via…
▽ More
Halide double perovskite semiconductors such as Cs2AgBiBr6 are widely investigated as a more stable, less toxic alternative to lead-halide perovskites in light conversion applications including photovoltaics and photoredox catalysis. However, the relatively large and indirect bandgap of Cs2AgBiBr6 limits efficient sunlight absorption. Here, we show that controlled replacement of Bi3+ with Fe3+ via mechanochemical synthesis results in a remarkable tunable absorption onset between 2.1 and ~1 eV. Our first-principles density functional theory (DFT) calculations suggest that this bandgap reduction originates primarily from a lowering of the conduction band upon introduction of Fe3+. Furthermore, we find that the tunability of the conduction band energy is reflected in the photoredox activity of these semiconductors. Finally, our DFT calculations predict a direct bandgap when >50% of Bi3+ is replaced with Fe3+. Our findings open new avenues for enhancing the sunlight absorption of double perovskite semiconductors and for harnessing their full potential in sustainable energy applications.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
Recombination and localization: unfolding the pathways behind conductivity losses in Cs2AgBiBr6 thin films
Authors:
Huygen J. Jöbsis,
Valentina M. Caselli,
Sven H. C. Askes,
Erik C. Garnett,
Tom J. Savenije,
Freddy T. Rabouw,
Eline M. Hutter
Abstract:
Cs2AgBiBr6 (CABB) has been proposed as a promising non-toxic alternative to lead halide perovskites. However, low charge carrier collection efficiencies remain an obstacle for the incorporation of this material in optoelectronic applications. In this work, we study the optoelectronic properties of CABB thin films using steady state and transient absorption and reflectance spectroscopy. We find tha…
▽ More
Cs2AgBiBr6 (CABB) has been proposed as a promising non-toxic alternative to lead halide perovskites. However, low charge carrier collection efficiencies remain an obstacle for the incorporation of this material in optoelectronic applications. In this work, we study the optoelectronic properties of CABB thin films using steady state and transient absorption and reflectance spectroscopy. We find that optical measurements on such thin films are distorted as a consequence of multiple reflections within the film. Moreover, we discuss the pathways behind conductivity loss in these thin films, using a combination of microsecond transient absorption and time-resolved microwave conductivity spectroscopy. We demonstrate that a combined effect of carrier loss and localization results in the conductivity loss in CABB thin films. Moreover, we find that the charge carrier diffusion length and sample thickness are of the same order. This suggests that the materials surface is an important contributor to charge carrier loss.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Accelerated hot-carrier cooling in MAPbI3 perovskite by pressure-induced lattice compression
Authors:
Loreta A. Muscarella,
Eline M. Hutter,
Jarvist M. Frost,
Gianluca G. Grimaldi,
Jan Versluis,
Huib J. Bakker,
Bruno Ehrler
Abstract:
Hot-carrier cooling (HCC) in metal halide perovskites in the high-density regime is significantly slower compared to conventional semiconductors. This effect is commonly attributed to a hot-phonon bottleneck but the influence of the lattice properties on the HCC behaviour is poorly understood. Using pressure-dependent transient absorption spectroscopy (fs-TAS) we find that at an excitation density…
▽ More
Hot-carrier cooling (HCC) in metal halide perovskites in the high-density regime is significantly slower compared to conventional semiconductors. This effect is commonly attributed to a hot-phonon bottleneck but the influence of the lattice properties on the HCC behaviour is poorly understood. Using pressure-dependent transient absorption spectroscopy (fs-TAS) we find that at an excitation density below Mott transition, pressure does not affect the HCC. On the contrary, above Mott transition, HCC in methylammonium lead iodide (MAPbI3) is around two times as fast at 0.3 GPa compared to ambient pressure. Our electron-phonon coupling calculations reveal about two times stronger electron-phonon coupling for the inorganic cage mode at 0.3 GPa. However, our experiments reveal that pressure promotes faster HCC only above Mott transition. Altogether, these findings suggest a change in the nature of excited carriers in the high-density regime, providing insights on the electronic behavior of devices operating at such high charge-carrier density.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Metal halide perovskite toxicity effects on plants are caused by iodide ions
Authors:
Eline M. Hutter,
Reiny Sangster,
Christa Testerink,
Bruno Ehrler,
Charlotte M. M. Gommers
Abstract:
Highly-efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Combining these next-generation solar panels with agriculture, can optimize land-use, but brings new risks in case of leakage into the soil. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this…
▽ More
Highly-efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Combining these next-generation solar panels with agriculture, can optimize land-use, but brings new risks in case of leakage into the soil. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this prediction is scarce. We used Arabidopsis thaliana to test the toxicity of the lead-based perovskite MAPbI3 (MA = CH3NH3) and several of its precursors in plants. Our results show that MAPbI3 severely hampers plant growth at concentrations above 5 microM. Surprisingly, we find that the precursors MAI is equally toxic, while lead-based precursors without iodide are only toxic above 500 microM. These observations reveal that perovskite toxicity at low concentrations is caused by iodide ions specifically, and contrast the widespread idea that lead is the most harmful component. We calculate that iodide toxicity thresholds are likely to reach in the soil upon perovskite leakage, but much less so for lead toxicity thresholds. Hence, this work stresses the importance to further understand and predict harmful effects of iodide-containing perovskites in the environment.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
Lattice compression increases the activation barrier for phase segregation in mixed-halide perovskites
Authors:
Loreta A. Muscarella,
Eline M. Hutter,
Francesca Wittmann,
Young Won Woo,
Young-Kwang Jung,
Lucie McGovern,
Jan Versluis,
Aron Walsh,
Huib J. Bakker,
Bruno Ehrler
Abstract:
The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhan…
▽ More
The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhance the lifetime and stability. Using pressure-dependent transient absorption spectroscopy, we find that the formation rates of both iodide- and bromide-rich phases in MAPb(BrxI1-x)3 reduce by two orders of magnitude on increasing the pressure to 0.3 GPa. We explain this reduction from a compression-induced increase of the activation energy for halide migration, which is supported by first-principle calculations. A similar mechanism occurs when the unit cell volume is reduced by incorporating a smaller cation. These findings reveal that stability with respect to halide segregation can be achieved either physically through compressive stress or chemically through compositional engineering.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Thermodynamic stabilization of mixed-halide perovskites against phase segregation
Authors:
Eline M. Hutter,
Loreta A. Muscarella,
Francesca Wittmann,
Jan Versluis,
Lucie McGovern,
Huib J. Bakker,
Young-Won Woo,
Young-Kwang Jung,
Aron Walsh,
Bruno Ehrler
Abstract:
Mixing iodide and bromide in halide perovskite semiconductors is an effective strategy to tune their bandgap, therefore mixed-halide perovskites hold great promise for color-tunable LEDs and tandem solar cells. However, the bandgap of mixed-halide perovskites is unstable under (sun-)light, since the halides segregate into domains of different bandgaps. Using pressure-dependent ultrafast transient…
▽ More
Mixing iodide and bromide in halide perovskite semiconductors is an effective strategy to tune their bandgap, therefore mixed-halide perovskites hold great promise for color-tunable LEDs and tandem solar cells. However, the bandgap of mixed-halide perovskites is unstable under (sun-)light, since the halides segregate into domains of different bandgaps. Using pressure-dependent ultrafast transient absorption spectroscopy, we show that high external pressure increases the range of thermodynamically stable halide mixing ratios. Chemical pressure, by inserting a smaller cation, has the same effect, which means that any iodide-to-bromide ratio can be thermodynamically stabilized by tuning the crystal volume and compressibility. We interpret this stabilization by an alteration of the Helmholtz free energy via the largely overlooked PdeltaV term.
△ Less
Submitted 9 July, 2020; v1 submitted 15 January, 2020;
originally announced January 2020.
-
Quantifying Charge Carrier Mobilities and Recombination Rates in Metal Halide Perovskites from Time-Resolved Microwave Photo-conductivity Measurements
Authors:
Tom J. Savenije,
Dengyang Guo,
Valentina M. Caselli,
Eline M. Hutter
Abstract:
The unprecedented rise in power conversion efficiency of solar cells based on metal halide perovskites (MHPs) has led to enormous research effort to understand their photo-physical properties. In this paper, we review the progress in understanding the mobility and recombination of photo-generated charge carriers from nanosecond to microsecond time scales, monitored using electrodeless transient ph…
▽ More
The unprecedented rise in power conversion efficiency of solar cells based on metal halide perovskites (MHPs) has led to enormous research effort to understand their photo-physical properties. In this paper, we review the progress in understanding the mobility and recombination of photo-generated charge carriers from nanosecond to microsecond time scales, monitored using electrodeless transient photoconductivity techniques. In addition, we present a kinetic model to obtain rate constants from transient data recorded using a wide range of laser intensities. For various MHPs the temperature dependence of the mobilities and recombination rates are evaluated. Furthermore, we show how these rate constants can be used to predict the upper limit for the open-circuit voltage Voc of the corresponding device. Finally, we discuss photo-physical properties of MHPs that are not yet fully understood, and make recommendations for future research directions.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Pitfalls and prospects of optical spectroscopy to characterize perovskite-transport layer interfaces
Authors:
Eline M. Hutter,
Thomas Kirchartz,
Bruno Ehrler,
David Cahen,
Elizabeth von Hauff
Abstract:
Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectrosco…
▽ More
Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectroscopy to characterize the quality of the transport layer-perovskite interface. We highlight the power of complementary studies that use both continuous wave (cw) and time-resolved photoluminescence (PL) to understand non-radiative losses, and additional transient spectroscopies for characterizing the potential for loss-less carrier extraction at the solar cell interfaces. Based on this discussion, we make recommendations on how to extrapolate results from optical measurements to assess the quality of a transport layer, and its impact on solar cell efficiency.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
Crystal orientation and grain size: do they determine optoelectronic properties of MAPbI3 perovskite?
Authors:
Loreta A. Muscarella,
Eline M. Hutter,
Sandy Sanchez,
Christian D. Dieleman,
Tom J. Savenije,
Anders Hagfeldt,
Michael Saliba,
Bruno Ehrler
Abstract:
It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and g…
▽ More
It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and grain orientation using Electron Back-Scattered Diffraction (EBSD) and we study how these affect the optoelectronic properties as characterized by local photoluminescence (PL) and time-resolved microwave conductivity measurements (TRMC). We find a spherulitic growth yielding large (tens of micron), highly oriented grains along the (112) and (400) planes in contrast to randomly oriented, smaller (400 nm) grains observed in films fabricated via conventional antisolvent (AS) drip**. We observe a local enhancement and shift of the photoluminescence emission at different regions of the FIRA clusters, but these can be explained with a combination of light-outcoupling and self-absorption. We observe no effect of crystal orientation on the optoelectronic properties. Additionally, despite a substantial difference in grain size between our FIRA sample and a conventional AS sample, we find similar photoluminescence and charge carrier mobilities and lifetime for the two films. These findings show that the optoelectronic quality is not necessarily related to the orientation and size of crystalline domains in perovskite films indicating that fabrication requirements may be more relaxed for perovskites.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Maximising and Stabilising Luminescence in Metal Halide Perovskite Device Structures
Authors:
Mojtaba Abdi-Jalebi,
Zahra Andaji-Garmaroudi,
Stefania Cacovich,
Camille Stavrakas,
Bertrand Philippe,
Johannes M. Richter,
Mejd Alsari,
Edward P. Booker,
Eline M. Hutter,
Andrew J. Pearson,
Samuele Lilliu,
Tom J Savenije,
Håkan Rensmo,
Giorgio Divitini,
Caterina Ducati,
Richard H. Friend,
Samuel D. Stranks
Abstract:
Metal halide perovskites are attracting tremendous interest for a variety of optoelectronic applications. The ability to tune the perovskite bandgap by tweaking the chemical compositions opens up new applications as coloured emitters and as components of tandem photovoltaics. Nevertheless, non-radiative losses are still limiting performance, with luminescence yields in state-of-the-art perovskite…
▽ More
Metal halide perovskites are attracting tremendous interest for a variety of optoelectronic applications. The ability to tune the perovskite bandgap by tweaking the chemical compositions opens up new applications as coloured emitters and as components of tandem photovoltaics. Nevertheless, non-radiative losses are still limiting performance, with luminescence yields in state-of-the-art perovskite solar cells still far from 100% under solar illumination conditions. Furthermore, in mixed halide perovskite systems designed for continuous bandgap tunability (bandgaps ~1.7-1.9 eV), photo-induced ion segregation leads to bandgap instabilities. Here, we substantially mitigate both non-radiative losses and photo-induced ion migration in perovskite structures by decorating the surfaces and grain boundaries with passivating potassium-halide interlayers. We demonstrate external photo-luminescence quantum yields of 66%, translating to internal yields exceeding 95%. The high luminescence yields are achieved while maintaining high mobilities over 40 cm2V-1s-1, giving the elusive combination of both high luminescence and excellent charge transport. We find that the external luminescence yield when interfaced with electrodes in a solar cell device stack, a quantity that must be maximized to approach the efficiency limits, remains as high as 15%, indicating very clean interfaces. We also demonstrate the inhibition of photo-induced ion migration processes across a wide range of mixed halide perovskite bandgaps that otherwise show bandgap instabilities. We validate these results in full operating solar cells, highlighting the importance of stabilising luminescence in device structures. Our work represents a critical breakthrough in the construction of tunable halide perovskite films and interfaces that can approach the efficiency limits in tandem solar cells and coloured LEDs.
△ Less
Submitted 13 December, 2017;
originally announced December 2017.