-
The Maclaurin spheroid in disguise. New figures of equilibrium with external magnetic support
Authors:
Jean-Marc Huré,
Clément Staelen
Abstract:
We show that a rigidly rotating, homogeneous ellipsoid of revolution threaded by a uniform, coaxial magnetic field is a possible figure of equilibrium. While the spheroidal shape is fully preserved, the rotation rate is modified. Accordingly, we extend the fundamental formula by Maclaurin. In contrast with the non-magnetic case, prolate shapes are permitted, but there are critical states in the fo…
▽ More
We show that a rigidly rotating, homogeneous ellipsoid of revolution threaded by a uniform, coaxial magnetic field is a possible figure of equilibrium. While the spheroidal shape is fully preserved, the rotation rate is modified. Accordingly, we extend the fundamental formula by Maclaurin. In contrast with the non-magnetic case, prolate shapes are permitted, but there are critical states in the form of maximum elongations, depending on ionisation fraction, ion/electron drift, magnetic field and mass-density. As checked from numerical simulations based on the Self-Consistent-Field method, prolate states survive to gas compressibility. The relevance to interstellar clouds is outlined.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Approaching the structure of rotating bodies from dimension reduction
Authors:
Clément Staelen,
Jean-Marc Huré
Abstract:
We show that the two-dimensional structure of a rigidly rotating self-gravitating body is accessible with relatively good precision by assuming a purely spheroidal stratification. With this hypothesis, the two-dimensional problem becomes one-dimensional, and consists in solving two coupled fixed-point equations in terms of equatorial mass density and eccentricity of isopycnics. We propose a simple…
▽ More
We show that the two-dimensional structure of a rigidly rotating self-gravitating body is accessible with relatively good precision by assuming a purely spheroidal stratification. With this hypothesis, the two-dimensional problem becomes one-dimensional, and consists in solving two coupled fixed-point equations in terms of equatorial mass density and eccentricity of isopycnics. We propose a simple algorithm of resolution based on the self-consistent field method. Compared to the full unconstrained-surface two-dimensional problem, the precision in the normalized enthalpy field is better than $10^{-3}$ in absolute, and the computing time is drastically reduced. In addition, this one-dimensional approach is fully appropriate to fast rotators, works for any density profile (including any barotropic equation of state), and can account for mass density jumps in the system, including the existence of an ambient pressure. Several tests are given.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Nested spheroidal figures of equilibrium -- IV. On heterogeneous configurations
Authors:
Clément Staelen,
Jean-Marc Huré
Abstract:
The theory of Nested Figures of Equilibrium, expanded in Papers I and II, is investigated in the limit where the number of layers of the rotating body is infinite, enabling to reach full heterogeneity. In the asymptotic process, the discrete set of equations becomes a differential equation for the rotation rate. In the special case of rigid rotation (from center to surface), we are led to an Integ…
▽ More
The theory of Nested Figures of Equilibrium, expanded in Papers I and II, is investigated in the limit where the number of layers of the rotating body is infinite, enabling to reach full heterogeneity. In the asymptotic process, the discrete set of equations becomes a differential equation for the rotation rate. In the special case of rigid rotation (from center to surface), we are led to an Integro-Differential Equation (IDE) linking the ellipticity of isopycnic surfaces to the equatorial mass-density profile. In constrast with most studies, these equations are not restricted to small flattenings, but are valid for fast rotators as well. We use numerical solutions obtained from the SCF-method to validate this approach. At small ellipticities (slow rotation), we fully recover Clairaut's equation. Comparisons with Chandrasekhar's perturbative approach and with Roberts' work based on Virial equations are successful. We derive a criterion to characterize the transition from slow to fast rotators. The treatment of heterogeneous structures containing mass-density jumps is proposed through a modified IDE.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Nested spheroidal figures of equilibrium III. Connection with the gravitational moments $J_{2n}$
Authors:
B. Basillais,
J. -M. Huré
Abstract:
We establish, in the framework of the theory of nested figures, the expressions for the gravitational moments $J_{2n}$ of a systems made of ${\cal L}$ homogeneous layers separated by spheroidal surfaces and in relative rotational motion. We then discuss how to solve the inverse problem, which consists in finding the equilibrium configurations (i.e. internal structures) that reproduce ``exactly'' a…
▽ More
We establish, in the framework of the theory of nested figures, the expressions for the gravitational moments $J_{2n}$ of a systems made of ${\cal L}$ homogeneous layers separated by spheroidal surfaces and in relative rotational motion. We then discuss how to solve the inverse problem, which consists in finding the equilibrium configurations (i.e. internal structures) that reproduce ``exactly'' a set of observables, namely the equatorial radius, the total mass, the shape and the first gravitational moments. Two coefficients $J_{2n}$ being constrained per surface, ${\cal L}=1+\frac{n}{2}$ layers ($n$ even) are required to fix $J_2$ to $J_{2n}$.
As shown, this problem already suffers from a severe degeneracy, inherent in the fact that two spheroidal surfaces in the system confocal with each other leave unchanged all the moments. The complexity, which increases with the number of layers involved, can be reduced by considering the rotation rate of each layer. Jupiter is used as a test-bed to illustrate the method, concretely for ${\cal L}=2,3$ and $4$. For this planet, the number of possible internal structures is infinite for ${\cal L} > 2$. Intermediate layers can have smaller or larger oblateness, and can rotate slower or faster than the surroundings. Configurations with large and massive cores are always present. Low-mass cores (of the order a few Earth masses) are predicted for ${\cal L} \ge 4$. The results are in good agreement with the numerical solutions obtained from the Self-Consistent-Field method.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Nested spheroidal figures of equilibrium II. Generalization to L layers
Authors:
Jean-Marc Huré
Abstract:
We present a vectorial formalism to determine the approximate solutions to the problem of a composite body made of $L$ homogeneous, rigidly rotating layers bounded by spheroidal surfaces. The method is based on the 1st-order expansion of the gravitational potential over confocal parameters, thereby generalizing the method described in Paper I for $L=2$. For a given relative geometry of the ellipse…
▽ More
We present a vectorial formalism to determine the approximate solutions to the problem of a composite body made of $L$ homogeneous, rigidly rotating layers bounded by spheroidal surfaces. The method is based on the 1st-order expansion of the gravitational potential over confocal parameters, thereby generalizing the method described in Paper I for $L=2$. For a given relative geometry of the ellipses and a given set of mass-density jumps at the interfaces, the sequence of rotation rates and interface pressures is obtained analytically by recursion. A wide range of equilibria result when layers rotate in an asynchronous manner, although configurations with a negative oblateness gradient are more favorable. In contrast, states of global rotation (all layers move at the same rate), found by solving a linear system of $L-1$ equations, are much more constrained. In this case, we mathematically demonstrate that confocal and coelliptical configurations are not permitted. Approximate formula for small ellipticities are derived. These results reinforce and prolongate known results and classical theorems restricted to small elliptiticities. Comparisons with the numerical solutions computed from the Self-Consistent-Field method are successful.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Nested spheroidal figures of equilibrium I. Approximate solutions for rigid rotations
Authors:
Jean-Marc Huré
Abstract:
We discuss the equilibrium conditions for a body made of two homogeneous components separated by oblate spheroidal surfaces and in relative motion. While exact solutions are not permitted for rigid rotation (unless a specific ambient pressure), approximations can be obtained for configurations involving a small confocal parameter. The problem then admits two families of solutions, depending on the…
▽ More
We discuss the equilibrium conditions for a body made of two homogeneous components separated by oblate spheroidal surfaces and in relative motion. While exact solutions are not permitted for rigid rotation (unless a specific ambient pressure), approximations can be obtained for configurations involving a small confocal parameter. The problem then admits two families of solutions, depending on the pressure along the common interface (constant or quadratic with the cylindrical radius). We give in both cases the pressure and the rotation rates as a function of the fractional radius, ellipticities and mass-density jump. Various degrees of flattening are allowed but there are severe limitations for global rotation, as already known from classical theory (e.g. impossibility of confocal and coelliptical solutions, gradient of ellipticity outward). States of relative rotation are much less constrained, but these require a mass-density jump. This analytical approach compares successfully with the numerical solutions obtained from the Self-Consistent-Field method. Practical formula are derived in the limit of small ellipticities appropriate for slowly-rotating star/planet interiors.
△ Less
Submitted 14 March, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel
Authors:
D. Liang,
J. Hure,
A. Courcelle,
S. El Shawish,
B. Tanguy
Abstract:
Irradiation Assisted Stress Corrosion Cracking (IASCC) is a material degradation phenomenon affecting austenitic stainless steels used in nuclear Pressurized Water Reactors (PWR), leading to the initiation and propagation of intergranular cracks. Such phenomenon belongs to the broader class of InterGranular Stress Corrosion Cracking (IGSCC). A micromechanical analysis of IGSCC of an irradiated aus…
▽ More
Irradiation Assisted Stress Corrosion Cracking (IASCC) is a material degradation phenomenon affecting austenitic stainless steels used in nuclear Pressurized Water Reactors (PWR), leading to the initiation and propagation of intergranular cracks. Such phenomenon belongs to the broader class of InterGranular Stress Corrosion Cracking (IGSCC). A micromechanical analysis of IGSCC of an irradiated austenitic stainless steel is performed in this study to assess local cracking conditions. A 304L proton irradiated sample tested in PWR environment and showing intergranular cracking is investigated. Serial sectioning, Electron BackScatter Diffraction (EBSD) and a two-step misalignment procedure are performed to reconstruct the 3D microstructure over an extended volume, to assess statistically cracking criteria. A methodology is also developed to compute Grain Boundary (GB) normal orientations based on the EBSD measurements. The statistical analysis shows that cracking occurs preferentially for GB normals aligned with the mechanical loading axis, but also for low values of the Luster-Morris slip transmission parameter. Micromechanical simulations based on the reconstructed 3D microstructure, FFT-based solver and crystal plasticity constitutive equations modified to account for slip transmission at grain boundaries are finally performed. These simulations rationalize the correlation obtained experimentally into a single stress-based criterion. The actual strengths and weaknesses of such micromechanical approach are discussed.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
Yield criterion and finite strain behavior of random porous isotropic materials
Authors:
J. Hure
Abstract:
The mechanical response of isotropic elastoplastic materials containing random distributions of initially spherical voids is investigated computationally based on Fast Fourier Transform simulations. Numerical limit-analysis simulations at constant stress triaxiality allow to determine the yield surfaces, leading in particular to the determination of a Representative Volume Element size for the ons…
▽ More
The mechanical response of isotropic elastoplastic materials containing random distributions of initially spherical voids is investigated computationally based on Fast Fourier Transform simulations. Numerical limit-analysis simulations at constant stress triaxiality allow to determine the yield surfaces, leading in particular to the determination of a Representative Volume Element size for the onset of coalescence / inhomogeneous yielding. Moreover, two different coalescence regimes are observed that differ by the presence of shearing. The yield surfaces are found to be consistent with the combination of two models proposed in the literature, a GTN-type model calibrated for homogeneous yielding of random porous materials and an inhomogeneous yielding model accounting for both coalescence with or without shear. Finite strain simulations performed for different hardening moduli and stress triaxialities under axisymmetric loading conditions confirm the existence of a RVE up to the onset of inhomogeneous yielding. Coalescence strains are found to be significantly smaller for random porous materials than for periodic distribution of voids. A homogenized model is finally proposed that reproduces quantitatively the behavior of isotropic elastoplastic materials containing random distributions of voids under finite strains.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
The exterior gravitational potential of toroids
Authors:
J. -M. Huré,
B. Basillais,
V. Karas,
A. Trova,
O. Semerák
Abstract:
We perform a bivariate Taylor expansion of the axisymmetric Green function in order to determine the exterior potential of a static thin toroidal shell having a circular section, as given by the Laplace equation. This expansion, performed at the centre of the section, consists in an infinite series in the powers of the minor-to-major radius ratio $e$ of the shell. It is appropriate for a solid, ho…
▽ More
We perform a bivariate Taylor expansion of the axisymmetric Green function in order to determine the exterior potential of a static thin toroidal shell having a circular section, as given by the Laplace equation. This expansion, performed at the centre of the section, consists in an infinite series in the powers of the minor-to-major radius ratio $e$ of the shell. It is appropriate for a solid, homogeneous torus, as well as for inhomogeneous bodies (the case of a core stratification is considered). We show that the leading term is identical to the potential of a loop having the same main radius and the same mass | this "similarity" is shown to hold in the ${\cal O}(e^2)$ order. The series converges very well, especially close to the surface of the toroid where the average relative precision is $\sim 10^{-3}$ for $e\! = \!0.1$ at order zero, and as low as a few $10^{-6}$ at second order. The Laplace equation is satisfied {\em exactly} in every order, so no extra density is induced by truncation. The gravitational acceleration, important in dynamical studies, is reproduced with the same accuracy. The technique also applies to the magnetic potential and field generated by azimuthal currents as met in terrestrial and astrophysical plasmas.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
GG Tau A: gas properties and dynamics from the cavity to the outer disk
Authors:
N. T. Phuong,
A. Dutrey,
P. N. Diep,
S. Guilloteau,
E. Chapillon,
E. Di Folco,
Y-W. Tang,
V. Pietu,
J. Bary,
T. Beck,
F. Hersant,
D. T Hoai,
J. M. Hure,
P. T. Nhung,
A. Pierens,
P. Tuan-Anh
Abstract:
We used new ALMA $^{13}$CO and C$^{18}$O(3-2) observations obtained at high angular resolution ($\sim$0.2") together with previous CO(3-2) and (6-5) ALMA data and continuum maps at 1.3 and 0.8 mm in order to determine the gas properties (temperature, density, and kinematics) in the cavity and to a lesser extent in the outer disk of GG Tau A, the prototype of a young triple T Tauri star that is sur…
▽ More
We used new ALMA $^{13}$CO and C$^{18}$O(3-2) observations obtained at high angular resolution ($\sim$0.2") together with previous CO(3-2) and (6-5) ALMA data and continuum maps at 1.3 and 0.8 mm in order to determine the gas properties (temperature, density, and kinematics) in the cavity and to a lesser extent in the outer disk of GG Tau A, the prototype of a young triple T Tauri star that is surrounded by a massive and extended Keplerian outer disk. By deprojecting, we studied the radial and azimuthal gas distribution and its kinematics. We also applied a new method to improve the deconvolution of the CO data and in particular better quantify the emission from gas inside the cavity. We perform local and nonlocal thermodynamic equilibrium studies in order to determine the excitation conditions and relevant physical parameters inside the ring and in the central cavity. Residual emission after removing a smooth-disk model indicates unresolved structures at our angular resolution, probably in the form of irregular rings or spirals. The outer disk is cold, with a temperature $<20$ K beyond 250 au that drops quickly (r$^{-1}$). The kinematics of the gas inside the cavity reveals infall motions at about 10% of the Keplerian speed. We derive the amount of gas in the cavity, and find that the brightest clumps, which contain about 10% of this mass, have kinetic temperatures 40$-$80 K, CO column densities of a few 10$^{17}$ cm$^{-2}$, and H$_2$ densities around 10$^7$ cm$^{-3}$. Although the gas in the cavity is only a small fraction of the disk mass, the mass accretion rate throughout the cavity is comparable to or higher than the stellar accretion rate. It is accordingly sufficient to sustain the circumstellar disks on a long timescale.
△ Less
Submitted 10 February, 2020; v1 submitted 22 January, 2020;
originally announced January 2020.
-
Assessing size effects on the deformation of nanovoids in metallic materials
Authors:
J. Hure,
P. O. Barrioz,
B. Tanguy
Abstract:
An experimental methodology is developed to evaluate size effects in nanovoids deformation under macroscopic uniaxial stress loading conditions. Quantitative evaluation of voids deformation as a function of voids size shows both a crystallographic effect, albeit small compared to the scatter, and no evidence of size effects for voids diameter larger than 10 nm, while a slight effect is present for…
▽ More
An experimental methodology is developed to evaluate size effects in nanovoids deformation under macroscopic uniaxial stress loading conditions. Quantitative evaluation of voids deformation as a function of voids size shows both a crystallographic effect, albeit small compared to the scatter, and no evidence of size effects for voids diameter larger than 10 nm, while a slight effect is present for smaller voids. Critical assessment of the data in light of theoretical models indicates that these results may be compatible with the presence of a hardened layer at the void/matrix interface, which is illustrated through finite element simulations accounting for surface tension.
△ Less
Submitted 26 October, 2019;
originally announced October 2019.
-
A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation
Authors:
J. M. Scherer,
J. Hure
Abstract:
Size effects have been predicted at the micro- or nano-scale for porous ductile materials from Molecular Dynamics, Discrete Dislocation Dynamics and Continuum Mechanics numerical simulations, as a consequence of Geometrically Necessary Dislocations or due to the presence of a void matrix interface. As voids size decreases, higher stresses are needed to deform the material, for a given porosity. Ho…
▽ More
Size effects have been predicted at the micro- or nano-scale for porous ductile materials from Molecular Dynamics, Discrete Dislocation Dynamics and Continuum Mechanics numerical simulations, as a consequence of Geometrically Necessary Dislocations or due to the presence of a void matrix interface. As voids size decreases, higher stresses are needed to deform the material, for a given porosity. However, the majority of the homogenized models for porous materials used in ductile fracture modeling are size-independent, even though micrometric or nanometric voids are commonly observed in structural materials. Based on yield criteria proposed in the literature for nanoporous materials, a size-dependent homogenized model for porous materials is proposed for axisymmetric loading conditions, including void growth and coalescence as well as void shape effects. Numerical implementation of the constitutive equations is detailed. The homogenized model is validated through comparisons to porous unit cells finite element simulations that consider interfacial stresses, consistently with the model used for the derivation of the yield criteria, aiming at modeling an additional hardening at the void matrix interface. Potential improvements of the model are finally discussed with respect to the theoretical derivation of refined yield criteria and evolution laws.
△ Less
Submitted 26 October, 2019;
originally announced October 2019.
-
Rigidly rotating, incompressible spheroid-ring systems: new bifurcations, critical rotations and degenerate states
Authors:
B. Basillais,
J. -M. Huré
Abstract:
The equilibrium of incompressible spheroid-ring systems in rigid rotation is investigated by numerical means for a unity density contrast. A great diversity of binary configurations is obtained, with no limit neither in the mass ratio, nor in the orbital separation. We found only detached binaries, meaning that the end-point of the $ε_2$-sequence is the single binary state in strict contact, easil…
▽ More
The equilibrium of incompressible spheroid-ring systems in rigid rotation is investigated by numerical means for a unity density contrast. A great diversity of binary configurations is obtained, with no limit neither in the mass ratio, nor in the orbital separation. We found only detached binaries, meaning that the end-point of the $ε_2$-sequence is the single binary state in strict contact, easily prone to mass-exchange. The solutions show a remarkable confinement in the rotation frequency-angular momentum diagram, with a total absence of equilibrium for $Ω^2/ πG ρ\gtrsim 0.21$. A short band of degeneracy is present next to the one-ring sequence. We unveil a continuum of bifurcations all along the ascending side of the Maclaurin sequence for eccentricities of the ellipsoid less than $\approx 0.612$ and which involves a gradually expanding, initially massless loop.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
-
Interior potential of a toroidal shell from pole values
Authors:
J. -M. Huré,
A. Trova,
V. Karas,
C. Lesca,
Univ. Bordeaux,
France,
CNRS-LAB,
France,
University of Bremen,
Center of Applied Space Technology,
Microgravity,
Germany,
Astronomical Institute,
Academy of Sciences,
Czech Republic
Abstract:
We have investigated the toroidal analog of ellipsoidal shells of matter, which are of great significance in Astrophysics. The exact formula for the gravitational potential $Ψ(R,Z)$ of a shell with a circular section at the pole of toroidal coordinates is first established. It depends on the mass of the shell, its main radius and axis-ratio $e$ (i.e. core-to-main radius ratio), and involves the pr…
▽ More
We have investigated the toroidal analog of ellipsoidal shells of matter, which are of great significance in Astrophysics. The exact formula for the gravitational potential $Ψ(R,Z)$ of a shell with a circular section at the pole of toroidal coordinates is first established. It depends on the mass of the shell, its main radius and axis-ratio $e$ (i.e. core-to-main radius ratio), and involves the product of the complete elliptic integrals of the first and second kinds. Next, we show that successive partial derivatives $\partial^{n +m} Ψ/\partial_{R^n} \partial_{Z^m}$ are also accessible by analytical means at that singular point, thereby enabling the expansion of the interior potential as a bivariate series. Then, we have generated approximations at orders $0$, $1$, $2$ and $3$, corresponding to increasing accuracy. Numerical experiments confirm the great reliability of the approach, in particular for small-to-moderate axis ratios ($e^2 \lesssim 0.1$ typically). In contrast with the ellipsoidal case (Newton's theorem), the potential is not uniform inside the shell cavity as a consequence of the curvature. We explain how to construct the interior potential of toroidal shells with a thick edge (i.e. tubes), and how a core stratification can be accounted for. This is a new step towards the full description of the gravitating potential and forces of tori and rings. Applications also concern electrically-charged systems, and thus go beyond the context of gravitation.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
A coalescence criterion for porous single crystals
Authors:
J. Hure
Abstract:
Voids can be observed at various scales in ductile materials, frequently of sizes lower than the grain size, leading to porous single crystals materials. Two local deformation modes of porous ductile (single crystals) materials have been identified and referred to as void growth and void coalescence, the latter being characterized by strong interactions between neighboring voids. A simple semi-ana…
▽ More
Voids can be observed at various scales in ductile materials, frequently of sizes lower than the grain size, leading to porous single crystals materials. Two local deformation modes of porous ductile (single crystals) materials have been identified and referred to as void growth and void coalescence, the latter being characterized by strong interactions between neighboring voids. A simple semi-analytical coalescence criterion for porous single crystals with periodic arrangement of voids is proposed using effective isotropic yield stresses associated with a criterion derived for isotropic materials. An extension of the coalescence criterion is also proposed to account for shear with respect to the coalescence plane. Effective yield stresses are defined using Taylor theory of single crystal deformation, and rely ultimately on the computation of average Taylor factors. Arbitrary sets of slip systems can be considered. The coalescence criterion is assessed through comparisons to numerical limit analysis results performed using a Fast-Fourier-Transform based solver. A good agreement is observed between the proposed criterion and numerical results for various configurations including different sets of slip systems (Face-Centered-Cubic, Hexagonal-Close-Packed), crystal orientations, void shapes and loading conditions. The competition between void growth and void coalescence is described for specific conditions, emphasizing the strong influence of both crystal orientation and void lattice, as well as their interactions.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Intergranular normal stress distributions in untextured polycrystalline aggregates
Authors:
S. El Shawish,
J. Hure
Abstract:
From a general point of view, InterGranular Stress-Corrosion Cracking (IGSCC) results from the interplay between mechanical loading and grain boundaries opening. The former leads to intergranular stresses in polycrystalline aggregates, the latter being either stress-accelerated or stress-induced. This work aims at obtaining intergranular normal stress distributions in uncracked polycrystalline agg…
▽ More
From a general point of view, InterGranular Stress-Corrosion Cracking (IGSCC) results from the interplay between mechanical loading and grain boundaries opening. The former leads to intergranular stresses in polycrystalline aggregates, the latter being either stress-accelerated or stress-induced. This work aims at obtaining intergranular normal stress distributions in uncracked polycrystalline aggregates, which is considered as a key milestone towards IGSCC initiation predictive modelling. Based on the finite element method, numerical simulations have been performed on Voronoi polycrystalline aggregates considering a wide variety of material constitutive equations: crystal elasticity (cubic and hexagonal symmetries) with different anisotropy ratios and crystal plasticity for different sets of slip systems under the assumption of uniform critical resolved shear stress: Face-Centered Cubic (FCC), Body-Centered Cubic (BCC) and Hexagonal Close Packed (HCP) with or without hardening, and for both uniaxial and equibiaxial macroscopic loading conditions. In the elastic regime, a correlation between standard deviations of intergranular normal stress distributions and a universal elastic anisotropy index proposed recently is found and explained through a simple model. For macroscopic strain larger than the yield strain, the evolution of standard deviations with strain is rationalized by accounting only for the macroscopic elastic strain and the standard deviation of Taylor factor. These numerical results associated with physically-based simple models allow to estimate easily intergranular normal stress concentrations, constituting a tool for classifying polycrystalline aggregates according to their potential susceptibility to IGSCC.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Void growth and coalescence in irradiated copper under deformation
Authors:
P. O. Barrioz,
J. Hure,
B. Tanguy
Abstract:
A decrease of fracture toughness of irradiated materials is usually observed, as reported for austenitic stainless steels in Light Water Reactors (LWRs) or copper alloys for fusion applications. For a wide range of applications (e.g. structural steels irradiated at low homologous temperature), void growth and coalescence fracture mechanism has been shown to be still predominant. As a consequence,…
▽ More
A decrease of fracture toughness of irradiated materials is usually observed, as reported for austenitic stainless steels in Light Water Reactors (LWRs) or copper alloys for fusion applications. For a wide range of applications (e.g. structural steels irradiated at low homologous temperature), void growth and coalescence fracture mechanism has been shown to be still predominant. As a consequence, a comprehensive study of the effects of irradiation-induced hardening mechanisms on void growth and coalescence in irradiated materials is required. The effects of irradiation on ductile fracture mechanisms - void growth to coalescence - are assessed in this study based on model experiments. Pure copper thin tensile samples have been irradiated with protons up to 0.01 dpa. Micron-scale holes drilled through the thickness of these samples subjected to uniaxial loading conditions allow a detailed description of void growth and coalescence. In this study, experimental data show that physical mechanisms of micron-scale void growth and coalescence are similar between the unirradiated and irradiated copper. However, an acceleration of void growth is observed in the later case, resulting in earlier coalescence, which is consistent with the decrease of fracture toughness reported in irradiated materials. These results are qualitatively reproduced with numerical simulations accounting for irradiation macroscopic hardening and decrease of strain-hardening capability.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
The equilibrium of over-pressurised polytropes
Authors:
J. -M. Huré,
F. Hersant,
G. Nasello
Abstract:
We investigate the impact of an external pressure on the structure of self-gravitating polytropes for axially symmetric ellipsoids and rings. The confinement of the fluid by photons is accounted for through a boundary condition on the enthalpy $H$. Equilibrium configurations are determined numerically from a generalised "Self-Consistent-Field"-method. The new algorithm incorporates an intra-loop r…
▽ More
We investigate the impact of an external pressure on the structure of self-gravitating polytropes for axially symmetric ellipsoids and rings. The confinement of the fluid by photons is accounted for through a boundary condition on the enthalpy $H$. Equilibrium configurations are determined numerically from a generalised "Self-Consistent-Field"-method. The new algorithm incorporates an intra-loop re-scaling operator ${\cal R}(H)$, which is essential for both convergence and getting self-normalised solutions. The main control parameter is the external-to-core enthalpy ratio. In the case of uniform rotation rate and uniform surrounding pressure, we compute the mass, the volume, the rotation rate and the maximum enthalpy. This is repeated for a few polytropic indices $n$. For a given axis ratio, over-pressurization globally increases all output quantities, and this is more pronounced for large $n$. Density profiles are flatter than in the absence of an external pressure. When the control parameter asymptotically tends to unity, the fluid converges toward the incompressible solution, whatever the index, but becomes geometrically singular. Equilibrium sequences, obtained by varying the axis ratio, are built. States of critical rotation are greatly exceeded or even disappear. The same trends are observed with differential rotation. Finally, the typical response to a photon point source is presented. Strong irradiation favours sharp edges. Applications concern star forming regions and matter orbiting young stars and black holes.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
-
Anisotropic coalescence criterion for nanoporous materials
Authors:
V. Gallican,
J. Hure
Abstract:
Ductile fracture through void growth and coalescence depends significantly on the plastic anisotropy of the material and on void size, as shown by experiments and/or numerical simulations through several studies. Macroscopic (homogenized) yield criteria aiming at modeling nanoporous materials have been proposed only for the growth regime, i.e. non-interacting voids. The aim of this study is thus t…
▽ More
Ductile fracture through void growth and coalescence depends significantly on the plastic anisotropy of the material and on void size, as shown by experiments and/or numerical simulations through several studies. Macroscopic (homogenized) yield criteria aiming at modeling nanoporous materials have been proposed only for the growth regime, i.e. non-interacting voids. The aim of this study is thus to provide a yield criterion for nanoporous materials relevant for the coalescence regime, i.e. when plastic flow is localized between voids. Through homogenization and limit analysis, and accounting for interface stresses at the void-matrix interface, analytical coalescence criterion is derived under the following conditions: axisymmetric loading, orthotropic material obeying Hill's plasticity, cylindrical voids in cylindrical unit-cell. Incidentally, an orthotropic extension of the existing isotropic modeling of interface stresses through limit analysis is described and used. The proposed coalescence criterion is then extended to account for combined tension and shear loading conditions. Numerical limit analyses have been performed under specific conditions / materials parameters to get supposedly exact (up to numerical errors) results of coalescence stress. A good agreement between the analytical coalescence criteria derived in this study and numerical results is found for elongated spheroidal voids, making them usable to predict the onset of void coalescence in ductile fracture modeling of nanoporous materials.
△ Less
Submitted 16 September, 2017;
originally announced September 2017.
-
Toroidal figures of equilibrium from a 2nd-order accurate, accelerated SCF-method with subgrid approach
Authors:
J. -M. Huré,
F. Hersant
Abstract:
We compute the structure of a self-gravitating torus with polytropic equation-of-state (EOS) rotating in an imposed centrifugal potential. The Poisson-solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at $2$nd-order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (i.e. polytropic index $n \ge 1$),…
▽ More
We compute the structure of a self-gravitating torus with polytropic equation-of-state (EOS) rotating in an imposed centrifugal potential. The Poisson-solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at $2$nd-order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (i.e. polytropic index $n \ge 1$), the underlying $2$nd-order is naturally recovered for Boundary Values (BVs) and any other integrated quantity sensitive to the mass density (mass, angular momentum, volume, Virial Parameter, etc.), i.e. errors vary with the number $N$ of nodes per direction as $\sim 1/N^2$. This is, however, not observed for purely geometrical quantities (surface area, meridional section area, volume), unless a subgrid approach is considered (i.e. boundary detection). Equilibrium sequences are also much better described, especially close to critical rotation. Yet another technical effort is required for hard EOS ($n < 1$), due to infinite mass density gradients at the fluid surface. We fix the problem by using kernel splitting. Finally, we propose an accelerated version of the SCF-algorithm based on a node-by-node pre-conditionning of the mass density at each step. The computing time is reduced by a factor $2$ typically, regardless of the polytropic index. There is a priori no obstacle to applying these results and techniques to ellipsoidal configurations and even to $3$D-configurations.
△ Less
Submitted 19 October, 2016;
originally announced October 2016.
-
Theoretical estimates for flat voids coalescence by internal necking
Authors:
J. Hure,
P. O. Barrioz
Abstract:
Coalescence of voids by internal necking is in most cases the last microscopic event related to ductile fracture and corresponds to a localized plastic flow between adjacent voids. Macroscopic load associated to the onset of coalescence is classically estimated based on limit analysis. However, a rigorous upper-bound mathematical expression for the limitload required for flat voids coalescence tha…
▽ More
Coalescence of voids by internal necking is in most cases the last microscopic event related to ductile fracture and corresponds to a localized plastic flow between adjacent voids. Macroscopic load associated to the onset of coalescence is classically estimated based on limit analysis. However, a rigorous upper-bound mathematical expression for the limitload required for flat voids coalescence that remains finite for penny-shaped voids/cracks is still unavailable. Therefore, based on limit analysis, theoretical upper-bound estimates - both integral expression and closed-form formula - are obtained for the limit-load of cylindrical flat voids in cylindrical unit-cell subjected to boundary conditions allowing the assessment of coalescence, for axisymmetric stress state. These estimates, leading to finite limit-loads for pennyshaped cracks, are shown to be in very good agreement with numerical limit analysis, for both cylindrical and spheroidal voids. Approximate formula is also given for coalescence under combined tension and shear loading. These coalescence criteria can thus be used to predict onset of coalescence of voids by internal necking in ductile fracture modelling.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Intergranular stress distributions in polycrystalline aggregates of irradiated stainless steel
Authors:
J. Hure,
S. El Shawish,
L. Cizelj,
B. Tanguy
Abstract:
In order to predict InterGranular Stress Corrosion Cracking (IGSCC) of post-irradiated austenitic stainless steel in Light Water Reactor (LWR) environment, reliable predictions of intergranular stresses are required. Finite elements simulations have been performed on realistic polycrystalline aggregate with a recently proposed physically-based crystal plasticity constitutive equations validated fo…
▽ More
In order to predict InterGranular Stress Corrosion Cracking (IGSCC) of post-irradiated austenitic stainless steel in Light Water Reactor (LWR) environment, reliable predictions of intergranular stresses are required. Finite elements simulations have been performed on realistic polycrystalline aggregate with a recently proposed physically-based crystal plasticity constitutive equations validated for neutron-irradiated austenitic stainless steel. Intergranular normal stress probability density functions are found with respect to plastic strain and irradiation level, for uniaxial loading conditions. In addition, plastic slip activity jumps at grain boundaries are also presented. Intergranular normal stress distributions describe, from a statistical point of view, the potential increase of intergranular stress with respect to the macroscopic stress due to grain-grain interactions. The distributions are shown to be well described by a master curve once rescaled by the macroscopic stress, in the range of irradiation level and strain considered in this study. The upper tail of this master curve is shown to be insensitive to free surface effect, which is relevant for IGSCC
△ Less
Submitted 26 May, 2016;
originally announced May 2016.
-
Asymmetric mass models of disk galaxies - I. Messier 99
Authors:
Laurent Chemin,
Jean-Marc Hure,
Caroline Soubiran,
Stefano Zibetti,
Stephane Charlot,
Daisuke Kawata
Abstract:
Mass models of galactic disks traditionally rely on axisymmetric density and rotation curves, paradoxically acting as if their most remarkable asymmetric features, such as lopsidedness or spiral arms, were not important. In this article, we relax the axisymmetry approximation and introduce a methodology that derives 3D gravitational potentials of disk-like objects and robustly estimates the impact…
▽ More
Mass models of galactic disks traditionally rely on axisymmetric density and rotation curves, paradoxically acting as if their most remarkable asymmetric features, such as lopsidedness or spiral arms, were not important. In this article, we relax the axisymmetry approximation and introduce a methodology that derives 3D gravitational potentials of disk-like objects and robustly estimates the impacts of asymmetries on circular velocities in the disk midplane. Mass distribution models can then be directly fitted to asymmetric line-of-sight velocity fields. Applied to the grand-design spiral M99, the new strategy shows that circular velocities are highly nonuniform, particularly in the inner disk of the galaxy, as a natural response to the perturbed gravitational potential of luminous matter. A cuspy inner density profile of dark matter is found in M99, in the usual case where luminous and dark matter share the same center. The impact of the velocity nonuniformity is to make the inner profile less steep, although the density remains cuspy. On another hand, a model where the halo is core dominated and shifted by 2.2-2.5 kpc from the luminous mass center is more appropriate to explain most of the kinematical lopsidedness evidenced in the velocity field of M99. However, the gravitational potential of luminous baryons is not asymmetric enough to explain the kinematical lopsidedness of the innermost regions, irrespective of the density shape of dark matter. This discrepancy points out the necessity of an additional dynamical process in these regions: possibly a lopsided distribution of dark matter.
△ Less
Submitted 19 January, 2016; v1 submitted 7 January, 2016;
originally announced January 2016.
-
Map** CO Gas in the GG Tauri A Triple System with 50 AU Spatial Resolution
Authors:
Ya-Wen Tang,
Anne Dutrey,
Stephane Guilloteau,
Edwige Chapillon,
Vincent Pietu,
Emmanuel Di Folco,
Jeff Bary,
Tracy Beck,
Herve Beust,
Yann Boehler,
Frederic Gueth,
Jean-Marc Hure,
Arnaud Pierens,
Michal Simon
Abstract:
We aim to unveil the observational imprint of physical mechanisms that govern planetary formation in the young, multiple system GG Tau A. We present ALMA observations of $^{12}$CO and $^{13}$CO 3-2 and 0.9 mm continuum emission with 0.35" resolution. The $^{12}$CO 3-2 emission, found within the cavity of the circumternary dust ring (at radius $< 180$ AU) where no $^{13}$CO emission is detected, co…
▽ More
We aim to unveil the observational imprint of physical mechanisms that govern planetary formation in the young, multiple system GG Tau A. We present ALMA observations of $^{12}$CO and $^{13}$CO 3-2 and 0.9 mm continuum emission with 0.35" resolution. The $^{12}$CO 3-2 emission, found within the cavity of the circumternary dust ring (at radius $< 180$ AU) where no $^{13}$CO emission is detected, confirms the presence of CO gas near the circumstellar disk of GG Tau Aa. The outer disk and the recently detected hot spot lying at the outer edge of the dust ring are mapped both in $^{12}$CO and $^{13}$CO. The gas emission in the outer disk can be radially decomposed as a series of slightly overlap** Gaussian rings, suggesting the presence of unresolved gaps or dips. The dip closest to the disk center lies at a radius very close to the hot spot location at $\sim250-260$~AU. The CO excitation conditions indicate that the outer disk remains in the shadow of the ring. The hot spot probably results from local heating processes. The two latter points reinforce the hypothesis that the hot spot is created by an embedded proto-planet shepherding the outer disk.
△ Less
Submitted 3 February, 2016; v1 submitted 18 November, 2015;
originally announced November 2015.
-
A truly Newtonian softening length for disc simulations
Authors:
Jean-Marc Huré,
Audrey Trova
Abstract:
The softened point mass model is commonly used in simulations of gaseous discs including self-gravity while the value of associated length λremains, to some degree, controversial. This ``parameter'' is however fully constrained when, in a discretized disc, all fluid cells are demanded to obey Newton's law. We examine the topology of solutions in this context, focusing on cylindrical cells more or…
▽ More
The softened point mass model is commonly used in simulations of gaseous discs including self-gravity while the value of associated length λremains, to some degree, controversial. This ``parameter'' is however fully constrained when, in a discretized disc, all fluid cells are demanded to obey Newton's law. We examine the topology of solutions in this context, focusing on cylindrical cells more or less vertically elongated. We find that not only the nominal length depends critically on the cell's shape (curvature, radial extension, height), but it is either a real or an imaginary number. Setting λas a fraction of the local disc thickness -- as usually done -- is indeed not the optimal choice. We then propose a novel prescription valid irrespective of the disc properties and grid spacings. The benefit, which amounts to 2-3 more digits typically, is illustrated in a few concrete cases. A detailed mathematical analysis is in progress.
△ Less
Submitted 26 November, 2014;
originally announced November 2014.
-
Self-gravity in curved mesh elements
Authors:
Jean-Marc Huré,
Audrey Trova,
Franck Hersant
Abstract:
The local character of self-gravity along with the number of spatial dimensions are critical issues when computing the potential and forces inside massive systems like stars and disks. This appears from the discretisation scale where each cell of the numerical grid is a self-interacting body in itself. There is apparently no closed-form expression yet giving the potential of a three-dimensional ho…
▽ More
The local character of self-gravity along with the number of spatial dimensions are critical issues when computing the potential and forces inside massive systems like stars and disks. This appears from the discretisation scale where each cell of the numerical grid is a self-interacting body in itself. There is apparently no closed-form expression yet giving the potential of a three-dimensional homogeneous cylindrical or spherical cell, in contrast with the Cartesian case. By using Green's theorem, we show that the potential integral for such polar-type 3D sectors -- initially, a volume integral with singular kernel -- can be converted into a regular line-integral running over the lateral contour, thereby generalising a formula already known under axial symmetry. It therefore is a step towards the obtention of another potential/density pair. The new kernel is a finite function of the cell's shape (with the simplest form in cylindrical geometry), and mixes incomplete elliptic integrals, inverse trigonometric and hyperbolic functions. The contour integral is easy to compute; it is valid in the whole physical space, exterior and interior to the sector itself and works in fact for a wide variety of shapes of astrophysical interest (e.g. sectors of tori or flared discs). This result is suited to easily providing reference solutions, and to reconstructing potential and forces in inhomogeneous systems by superposition. The contour integrals for the 3 components of the acceleration vector are explicitely given.
△ Less
Submitted 13 January, 2014;
originally announced January 2014.
-
Self-gravity in thin discs and edge effects: an extension of Paczynski's approximation
Authors:
Audrey Trova,
Jean-Marc Huré,
Franck Hersant
Abstract:
As hydrostatic equilibrium of gaseous discs is partly governed by the gravity field, we have estimated the component caused by a vertically homogeneous disc, with a special attention for the outer regions where self-gravity classically appears. The accuracy of the integral formula is better than 1%, whatever the disc thickness, radial extension and radial density profile. At order zero, the field…
▽ More
As hydrostatic equilibrium of gaseous discs is partly governed by the gravity field, we have estimated the component caused by a vertically homogeneous disc, with a special attention for the outer regions where self-gravity classically appears. The accuracy of the integral formula is better than 1%, whatever the disc thickness, radial extension and radial density profile. At order zero, the field is even algebraic for thin discs and writes $- 4 πG Σ(R) f_{edge} (R)$ at disc surface, thereby correcting Paczynski's formula by a multiplying factor $f_{edge} \gtrsim 1/2$, which depends on the relative distance to the edges and the local disc thickness. For very centrally condensed discs however, this local contribution can be surpassed by action of mass stored in the inner regions, possibly resulting in $f_{edge} \gg 1$. A criterion setting the limit between these two regimes is derived. These result are robust in the sense that the details of vertical stratification are not critical. We briefly discuss how hydrostatic equilibrium is impacted. In particular, the disc flaring should not reverse in the self-gravitating region, which contradicts what is usually obtained from Paczynski's formula. This suggests that i) these outer regions are probably not fully shadowed by the inner ones (important when illuminated by a central star), and ii) the flared shape of discs does not firmly prove the absence or weakness of self-gravity.
△ Less
Submitted 13 January, 2014;
originally announced January 2014.
-
Local stresses in the Janssen granular column
Authors:
T. Cambau,
J. Hure,
J. Marthelot
Abstract:
We study experimentally the distribution of local stresses in a granular material confined inside a vertical cylinder. We use an image correlation technique to measure the displacement field of the container induced by the forces exerted by the grains on the inner wall. We describe an optimization procedure based on the linear theory of elastic shells to deduce the distribution of these forces fro…
▽ More
We study experimentally the distribution of local stresses in a granular material confined inside a vertical cylinder. We use an image correlation technique to measure the displacement field of the container induced by the forces exerted by the grains on the inner wall. We describe an optimization procedure based on the linear theory of elastic shells to deduce the distribution of these forces from the measured displacement field. They correspond to the stress field of the granular material close to the container's inner wall. We first confirm the validity of Janssen's description for various experiments, including the influence of the bead diameter and the effect of an additional mass on top of the granular column. We then apply this method to determine the stress field during the gravity-driven discharge of a silo through an aperture.
△ Less
Submitted 27 August, 2013;
originally announced August 2013.
-
Exact, singularity-free recasting of the Newtonian potential in continuous media
Authors:
Jean-Marc Huré
Abstract:
The gravitational potential is a key function involved in many astrophysical problems. Its evaluation inside continuous media from Newton's law is known to be challenging because of the diverging kernel 1/|r-r'|. This difficulty is generally treated with avoidance techniques (e.g. multipole expansions, softening length) themselves not without drawbacks. In this article, we present a new path that…
▽ More
The gravitational potential is a key function involved in many astrophysical problems. Its evaluation inside continuous media from Newton's law is known to be challenging because of the diverging kernel 1/|r-r'|. This difficulty is generally treated with avoidance techniques (e.g. multipole expansions, softening length) themselves not without drawbacks. In this article, we present a new path that basically fixes the point-mass singularity problem in systems with, at least, two dimensions. It consists of recasting the gravitational potential in an equivalent integro-differential form, namely the cross-derivative of a "hyperpotential" (i.e., an auxiliary scalar function). In contrast with the potential, the hyperpotential is the convolution of the mass density with a finite amplitude kernel. We show that closed-form expressions for this new kernel can be directly deduced from the potential of homogeneous sheets. We then give a few formulae appropriate to the Cartesian, cylindrical and spherical coordinate systems, including axial symmetry. The method is essentially not limited, either on the geometry of the source or on the distribution, and its implementation is straightforward. Several tests based upon simple quadrature/differentiation schemes are presented (the homogeneous rectangular sheet, cuboid and disk, the Maclaurin disk and a truncated Lane-Emden solution). Compared with a direct summation, the extra computational cost is low and the gain is real: no truncated series, no free parameter, and a relative accuracy better than 1% for typically 16 nodes per spatial direction using the most basic numerical schemes.
△ Less
Submitted 23 April, 2013;
originally announced April 2013.
-
A key-formula to compute the gravitational potential of inhomogeneous discs in cylindrical coordinates
Authors:
Jean-Marc Huré
Abstract:
We have established the exact expression for the gravitational potential of a homogeneous polar cell - an elementary pattern used in hydrodynamical simulations of gravitating discs. This formula, which is a closed-form, works for any opening angle and radial extension of the cell. It is valid at any point in space, i.e. in the plane of the distribution (inside and outside) as well as off-plane, th…
▽ More
We have established the exact expression for the gravitational potential of a homogeneous polar cell - an elementary pattern used in hydrodynamical simulations of gravitating discs. This formula, which is a closed-form, works for any opening angle and radial extension of the cell. It is valid at any point in space, i.e. in the plane of the distribution (inside and outside) as well as off-plane, thereby generalizing the results reported by Durand (1953) for the circular disc. The three components of the gravitational acceleration are given. The mathematical demonstration proceeds from the "incomplete version of Durand's formula" for the potential (based on complete elliptic integrals). We determine first the potential due to the circular sector (i.e. a pie-slice sheet), and then deduce that of the polar cell (from convenient radial scaling and subtraction). As a by-product, we generate an integral theorem stating that "the angular average of the potential of any circular sector along its tangent circle is 2/PI times the value at the corner". A few examples are presented. For numerical resolutions and cell shapes commonly used in disc simulations, we quantify the importance of curvature effects by performing a direct comparison between the potential of the polar cell and that of the Cartesian (i.e. rectangular) cell having the same mass. Edge values are found to deviate roughly like 2E-3 x N/256 in relative (N is the number of grid points in the radial direction), while the agreement is typically four orders of magnitude better for values at the cell's center. We also produce a reliable approximation for the potential, valid in the cell's plane, inside and close to the cell. Its remarkable accuracy, about 5E-4 x N/256 in relative, is sufficient to estimate the cell's self-acceleration.
△ Less
Submitted 5 September, 2012;
originally announced September 2012.
-
Grabbing water
Authors:
P. M. Reis,
J. Hure,
S. Jung,
J. W. M. Bush,
C. Clanet
Abstract:
We introduce a novel technique for grabbing water with a flexible solid. This new passive pipetting mechanism was inspired by floating flowers and relies purely on the coupling of the elasticity of thin plates and the hydrodynamic forces at the liquid interface. Develo** a theoretical model has enabled us to design petal-shaped objects with maximum grabbing capacity.
We introduce a novel technique for grabbing water with a flexible solid. This new passive pipetting mechanism was inspired by floating flowers and relies purely on the coupling of the elasticity of thin plates and the hydrodynamic forces at the liquid interface. Develo** a theoretical model has enabled us to design petal-shaped objects with maximum grabbing capacity.
△ Less
Submitted 16 July, 2012;
originally announced July 2012.
-
Random blisters on stickers: metrology through defects
Authors:
Y. Aoyanagi,
J. Hure,
J. Bico,
B. Roman
Abstract:
Blisters are commonly observed when an adhesive sheet is carelessly deposited on a plate. Although such blisters are usually not desired for practical applications, we show through model experiments on angular blisters how material properties can be deduced from height profile measurements. In particular the typical curvature of the crests is found proportional to an elasto-capillary length that c…
▽ More
Blisters are commonly observed when an adhesive sheet is carelessly deposited on a plate. Although such blisters are usually not desired for practical applications, we show through model experiments on angular blisters how material properties can be deduced from height profile measurements. In particular the typical curvature of the crests is found proportional to an elasto-capillary length that compares the bending stiffness of the sheet with adhesion energy. In addition, the radius of the tip allows to estimate the product of this length with the thickness of the sheet. The relevance of these results to realistic random configurations is finally confirmed.
△ Less
Submitted 10 July, 2012;
originally announced July 2012.
-
Capillary buckling of a thin film adhering to a sphere
Authors:
J. Hure,
B. Audoly
Abstract:
We present a combined theoretical and experimental study of the buckling of a thin film wrapped around a sphere under the action of capillary forces. A rigid sphere is coated with a wetting liquid, and then wrapped by a thin film into an initially cylindrical shape. The equilibrium of this cylindrical shape is governed by the antagonistic effects of elasticity and capillarity: elasticity tends to…
▽ More
We present a combined theoretical and experimental study of the buckling of a thin film wrapped around a sphere under the action of capillary forces. A rigid sphere is coated with a wetting liquid, and then wrapped by a thin film into an initially cylindrical shape. The equilibrium of this cylindrical shape is governed by the antagonistic effects of elasticity and capillarity: elasticity tends to keep the film developable while capillarity tends to curve it in both directions so as to maximize the area of contact with the sphere. In the experiments, the contact area between the film and the sphere has cylindrical symmetry when the sphere radius is small, but destabilises to a non-symmetric, wrinkled configuration when the radius is larger than a critical value. We combine the Donnell equations for near-cylindrical shells to include a unilateral constraint with the impenetrable sphere, and the capillary forces acting along a moving edge. A non-linear solution describing the axisymmetric configuration of the film is derived. A linear stability analysis is then presented, which successfully captures the wrinkling instability, the symmetry of the unstable mode, the instability threshold and the critical wavelength. The motion of the free boundary at the edge of the region of contact, which has an effect on the instability, is treated without any approximation.
△ Less
Submitted 10 July, 2012;
originally announced July 2012.
-
Stam** and wrinkling of elastic plates
Authors:
J. Hure,
B. Roman,
J. Bico
Abstract:
We study the peculiar wrinkling pattern of an elastic plate stamped into a spherical mold. We show that the wavelength of the wrinkles decreases with their amplitude, but reaches a maximum when the amplitude is of the order of the thickness of the plate. The force required for compressing the wrinkled plate presents a maximum independent of the thickness. A model is derived and verified experiment…
▽ More
We study the peculiar wrinkling pattern of an elastic plate stamped into a spherical mold. We show that the wavelength of the wrinkles decreases with their amplitude, but reaches a maximum when the amplitude is of the order of the thickness of the plate. The force required for compressing the wrinkled plate presents a maximum independent of the thickness. A model is derived and verified experimentally for a simple one-dimensional case. This model is extended to the initial situation through an effective Young modulus representing the mechanical behavior of wrinkled state. The theoretical predictions are shown to be in good agreement with the experiments. This approach provides a complement to the "tension field theory" developed for wrinkles with unconstrained amplitude.
△ Less
Submitted 30 June, 2012;
originally announced July 2012.
-
The potential of discs from a "mean Green function"
Authors:
A. Trova,
J. M. Huré,
F. Hersant
Abstract:
By using various properties of the complete elliptic integrals, we have derived an alternative expression for the gravitational potential of axially symmetric bodies, which is free of singular kernel in contrast with the classical form. This is mainly a radial integral of the local surface density weighted by a regular "mean Green function" which depends explicitly on the body's vertical thickness…
▽ More
By using various properties of the complete elliptic integrals, we have derived an alternative expression for the gravitational potential of axially symmetric bodies, which is free of singular kernel in contrast with the classical form. This is mainly a radial integral of the local surface density weighted by a regular "mean Green function" which depends explicitly on the body's vertical thickness. Rigorously, this result stands for a wide variety of configurations, as soon as the density structure is vertically homogeneous. Nevertheless, the sensitivity to vertical stratification | the Gaussian profile has been considered | appears weak provided that the surface density is conserved. For bodies with small aspect ratio (i.e. geometrically thin discs), a first-order Taylor expansion furnishes an excellent approximation for this mean Green function, the absolute error being of the fourth order in the aspect ratio. This formula is therefore well suited to studying the structure of self-gravitating discs and rings in the spirit of the "standard model of thin discs" where the vertical structure is often ignored, but it remains accurate for discs and tori of finite thickness. This approximation which perfectly saves the properties of Newton's law everywhere (in particular at large separations), is also very useful for dynamical studies where the body is just a source of gravity acting on external test particles.
△ Less
Submitted 29 May, 2012;
originally announced May 2012.
-
A substitute for the singular Green kernel in the Newtonian potential of celestial bodies
Authors:
Jean-Marc Huré,
Andreas Dieckmann
Abstract:
The "point mass singularity" inherent in Newton's law for gravitation represents a major difficulty in accurately determining the potential and forces inside continuous bodies. Here we report a simple and efficient analytical method to bypass the singular Green kernel 1/|r-r'| inside the source without altering the nature of the interaction. We build an equivalent kernel made up of a "cool kernel"…
▽ More
The "point mass singularity" inherent in Newton's law for gravitation represents a major difficulty in accurately determining the potential and forces inside continuous bodies. Here we report a simple and efficient analytical method to bypass the singular Green kernel 1/|r-r'| inside the source without altering the nature of the interaction. We build an equivalent kernel made up of a "cool kernel", which is fully regular (and contains the long-range -GM/r asymptotic behavior), and the gradient of a "hyperkernel", which is also regular. Compared to the initial kernel, these two components are easily integrated over the source volume using standard numerical techniques. The demonstration is presented for three-dimensional distributions in cylindrical coordinates, which are well-suited to describing rotating bodies (stars, discs, asteroids, etc.) as commonly found in the Universe. An example of implementation is given. The case of axial symmetry is treated in detail, and the accuracy is checked by considering an exact potential/surface density pair corresponding to a flat circular disc. This framework provides new tools to keep or even improve the physical realism of models and simulations of self-gravitating systems, and represents, for some of them, a conclusive alternative to softened gravity.
△ Less
Submitted 30 March, 2012;
originally announced March 2012.
-
The Newtonian potential of thin disks
Authors:
Jean-Marc Huré,
Franck Hersant
Abstract:
The one-dimensional, ordinary differential equation (ODE) by Huré & Hersant (2007) that satisfies the midplane gravitational potential of truncated, flat power-law disks is extended to the whole physical space. It is shown that thickness effects (i.e. non-flatness) can be easily accounted for by implementing an appropriate "softening length" $λ$. The solution of this "softened ODE" has the followi…
▽ More
The one-dimensional, ordinary differential equation (ODE) by Huré & Hersant (2007) that satisfies the midplane gravitational potential of truncated, flat power-law disks is extended to the whole physical space. It is shown that thickness effects (i.e. non-flatness) can be easily accounted for by implementing an appropriate "softening length" $λ$. The solution of this "softened ODE" has the following properties: i) it is regular at the edges (finite radial accelerations), ii) it possesses the correct long-range properties, iii) it matches the Newtonian potential of a geometrically thin disk very well, and iv) it tends continuously to the flat disk solution in the limit $λ\rightarrow 0$. As illustrated by many examples, the ODE, subject to exact Dirichlet conditions, can be solved numerically with efficiency for any given colatitude at second-order from center to infinity using radial map**. This approach is therefore particularly well-suited to generating grids of gravitational forces in order to study particles moving under the field of a gravitating disk as found in various contexts (active nuclei, stellar systems, young stellar objects). Extension to non-power-law surface density profiles is straightforward through superposition. Grids can be produced upon request.
△ Less
Submitted 27 April, 2011;
originally announced April 2011.
-
AGN disks and black holes on the weighting scales
Authors:
Jean-Marc Huré,
Franck Hersant,
Clément Surville,
Naomasa Nakai,
Thierry Jacq
Abstract:
We exploit our formula for the gravitational potential of finite size, power-law disks to derive a general expression linking the mass of the black hole in active galactic nuclei (AGN), the mass of the surrounding disk, its surface density profile (through the power index s), and the differential rotation law. We find that the global rotation curve v(R) of the disk in centrifugal balance does not…
▽ More
We exploit our formula for the gravitational potential of finite size, power-law disks to derive a general expression linking the mass of the black hole in active galactic nuclei (AGN), the mass of the surrounding disk, its surface density profile (through the power index s), and the differential rotation law. We find that the global rotation curve v(R) of the disk in centrifugal balance does not obey a power law of the cylindrical radius R (except in the confusing case s = -2 that mimics a Keplerian motion), and discuss the local velocity index. This formula can help to understand how, from position-velocity diagrams, mass is shared between the disk and the black hole. To this purpose, we have checked the idea by generating a sample of synthetic data with different levels of Gaussian noise, added in radius. It turns out that, when observations are spread over a large radial domain and exhibit low dispersion (standard deviation less than 10% typically), the disk properties (mass and s-parameter) and black hole mass can be deduced from a non linear fit of kinematic data plotted on a (R, Rv 2)-diagram. For a deviation higher than 10%, masses are estimated fairly well from a linear regression (corresponding to the zeroth-order treatment of the formula), but the power index s is no longer accessible. We have applied the model to 7 AGN disks whose rotation has already been probed through water maser emission. For NGC3393 and UGC3789, the masses seem well constrained through the linear approach. For IC1481, the power-law exponent s can even be deduced. Because the model is scale-free, it applies to any kind of star/disk system. Extension to disks around young stars showing deviation from Keplerian motion is thus straightforward.
△ Less
Submitted 27 April, 2011; v1 submitted 13 April, 2011;
originally announced April 2011.
-
Wrap** an adhesive sphere with a sheet
Authors:
J. Hure,
B. Roman,
J. Bico
Abstract:
We study the adhesion of an elastic sheet on a rigid spherical substrate. Gauss'Theorema Egregium shows that this operation necessarily generates metric distortions (i.e. stretching) as well as bending. As a result, a large variety of contact patterns ranging from simple disks to complex branched shapes are observed as a function of both geometrical and material properties. We describe these diffe…
▽ More
We study the adhesion of an elastic sheet on a rigid spherical substrate. Gauss'Theorema Egregium shows that this operation necessarily generates metric distortions (i.e. stretching) as well as bending. As a result, a large variety of contact patterns ranging from simple disks to complex branched shapes are observed as a function of both geometrical and material properties. We describe these different morphologies as a function of two non-dimensional parameters comparing respectively bending and stretching energies to adhesion. A complete configuration diagram is finally proposed.
△ Less
Submitted 25 March, 2011;
originally announced March 2011.
-
A local prescription for the softening length in self-gravitating gaseous discs
Authors:
Jean-Marc Huré,
Arnaud Pierens
Abstract:
In 2D-simulations of self-gravitating gaseous discs, the potential is often computed in the framework of "softened gravity" initially designed for N-body codes. In this special context, the role of the softening length LAMBDA is twofold: i) to avoid numerical singularities in the integral representation of the potential (i.e., arising when the relative separation vanishes), and ii) to acount for…
▽ More
In 2D-simulations of self-gravitating gaseous discs, the potential is often computed in the framework of "softened gravity" initially designed for N-body codes. In this special context, the role of the softening length LAMBDA is twofold: i) to avoid numerical singularities in the integral representation of the potential (i.e., arising when the relative separation vanishes), and ii) to acount for stratification of matter in the direction perpendicular to the disc mid-plane. So far, most studies have considered LAMBDA as a free parameter and various values or formulae have been proposed without much mathematical justification. In this paper, we demonstrate by means of a rigorous calculus that it is possible to define LAMBDA such that the gravitational potential of a flat disc coincides at order zero with that of a geometically thin disc of the same surface density. Our prescription for LAMBDA, valid in the local, axisymmetric limit, has the required properties i) and ii). It is mainly an analytical function of the radius and disc thickness, and is sensitive to the vertical stratification. For mass density profiles considered (namely, profiles expandable over even powers of the altitude), we find that LAMBDA : i) is independant of the numerical mesh, ii) is always a fraction of the local thickness H, iii) goes through a minimum at the singularity (i.e., at null separation), and iv) is such that 0.13 < LAMBDA/H < 0.29 typically (depending on the separation and on density profile). These results should help us to improve the quality of 2D- and 3D-simulations of gaseous discs in several respects (physical realism, accuracy, and computing time).
△ Less
Submitted 4 September, 2009; v1 submitted 2 September, 2009;
originally announced September 2009.
-
Self-gravity at the scale of the polar cell
Authors:
J. -M. Huré,
A. Pierens,
F. Hersant
Abstract:
We present the exact calculus of the gravitational potential and acceleration along the symmetry axis of a plane, homogeneous, polar cell as a function of mean radius a, radial extension e, and opening angle f. Accurate approximations are derived in the limit of high numerical resolution at the geometrical mean <a> of the inner and outer radii (a key-position in current FFT-based Poisson solvers…
▽ More
We present the exact calculus of the gravitational potential and acceleration along the symmetry axis of a plane, homogeneous, polar cell as a function of mean radius a, radial extension e, and opening angle f. Accurate approximations are derived in the limit of high numerical resolution at the geometrical mean <a> of the inner and outer radii (a key-position in current FFT-based Poisson solvers). Our results are the full extension of the approximate formula given in the textbook of Binney & Tremaine to all resolutions. We also clarify definitely the question about the existence (or not) of self-forces in polar cells. We find that there is always a self-force at radius <a> except if the shape factor a.f/e reaches ~ 3.531, asymptotically. Such cells are therefore well suited to build a polar mesh for high resolution simulations of self-gravitating media in two dimensions. A by-product of this study is a newly discovered indefinite integral involving complete elliptic integral of the first kind over modulus.
△ Less
Submitted 2 April, 2009;
originally announced April 2009.
-
A new equation for the mid-plane potential of power law discs. II. Exact solutions and approximate formulae
Authors:
J. -M. Huré,
F. Hersant,
C. Carreau,
J. -P. Busset
Abstract:
The first-order ordinary differential equation (ODE) that describes the mid-plane gravitational potential in flat finite size discs in which the surface density is a power-law function of the radius R with exponent s (Huré & Hersant 2007) is solved exactly in terms of infinite series. The formal solution of the ODE is derived and then converted into a series representation by expanding the ellip…
▽ More
The first-order ordinary differential equation (ODE) that describes the mid-plane gravitational potential in flat finite size discs in which the surface density is a power-law function of the radius R with exponent s (Huré & Hersant 2007) is solved exactly in terms of infinite series. The formal solution of the ODE is derived and then converted into a series representation by expanding the elliptic integral of the first kind over its modulus before analytical integration. Inside the disc, the gravitational potential consists of three terms: a power law of radius R with index 1+s, and two infinite series of the variables R and 1/R. The convergence of the series can be accelerated, enabling the construction of reliable approximations. At the lowest-order, the potential inside large astrophysical discs (s ~ -1.5 +/- 1) is described by a very simple formula whose accuracy (a few percent typically) is easily increased by considering successive orders through a recurrence. A basic algorithm is given. Applications concern all theoretical models and numerical simulations where the influence of disc gravity must be checked and/or reliably taken into account.
△ Less
Submitted 12 August, 2008;
originally announced August 2008.
-
Generation of potential/surface density pairs in flat disks Power law distributions
Authors:
J. -M. Hure,
D. Pelat,
A. Pierens
Abstract:
We report a simple method to generate potential/surface density pairs in flat axially symmetric finite size disks. Potential/surface density pairs consist of a ``homogeneous'' pair (a closed form expression) corresponding to a uniform disk, and a ``residual'' pair. This residual component is converted into an infinite series of integrals over the radial extent of the disk. For a certain class of…
▽ More
We report a simple method to generate potential/surface density pairs in flat axially symmetric finite size disks. Potential/surface density pairs consist of a ``homogeneous'' pair (a closed form expression) corresponding to a uniform disk, and a ``residual'' pair. This residual component is converted into an infinite series of integrals over the radial extent of the disk. For a certain class of surface density distributions (like power laws of the radius), this series is fully analytical. The extraction of the homogeneous pair is equivalent to a convergence acceleration technique, in a matematical sense. In the case of power law distributions, the convergence rate of the residual series is shown to be cubic inside the source. As a consequence, very accurate potential values are obtained by low order truncation of the series. At zero order, relative errors on potential values do not exceed a few percent typically, and scale with the order N of truncation as 1/N**3. This method is superior to the classical multipole expansion whose very slow convergence is often critical for most practical applications.
△ Less
Submitted 25 June, 2007;
originally announced June 2007.
-
A new equation for the mid-plane potential of power law disks
Authors:
J. -M. Huré,
F. Hersant
Abstract:
We show that the gravitational potential in the plane of an axisymmetrical flat disk where the surface density varies as a power of the radius obeys an inhomogeneous first-order Ordinary Differential Equation (ODE) solvable by standard techniques. The potential being exactly known at the origin for any power index (and at infinity as well), the search for solutions consists of a Two-point Bounda…
▽ More
We show that the gravitational potential in the plane of an axisymmetrical flat disk where the surface density varies as a power of the radius obeys an inhomogeneous first-order Ordinary Differential Equation (ODE) solvable by standard techniques. The potential being exactly known at the origin for any power index (and at infinity as well), the search for solutions consists of a Two-point Boundary Value Problem (TBVP) with Dirichlet conditions. The computating time is then linear with the number of grid points, instead of quadratic from direct summation methods. Complex mass distributions which can be decomposed into a mixture of power law surface density profiles are easily accessible through the superposition principle. This ODE definitively takes the place of the untractable bidimensional Poisson equation for planar calculations. It opens new horizons to investigate various aspects related to self-gravity in astrophysical disks (force calculations, stability analysis, etc.).
△ Less
Submitted 26 March, 2007; v1 submitted 23 March, 2007;
originally announced March 2007.
-
How does disk gravity really influence type-I migration ?
Authors:
Arnaud Pierens,
Jean-Marc Hure
Abstract:
We report an analytical expression for the locations of Lindblad resonances induced by a perturbing protoplanet, including the effect of disk gravity. Inner, outer and differential torques are found to be enhanced compared to situations where a keplerian velocity field for the dynamics of both the disk and the planet is assumed. Inward migration is strongly accelerated when the disk gravity is o…
▽ More
We report an analytical expression for the locations of Lindblad resonances induced by a perturbing protoplanet, including the effect of disk gravity. Inner, outer and differential torques are found to be enhanced compared to situations where a keplerian velocity field for the dynamics of both the disk and the planet is assumed. Inward migration is strongly accelerated when the disk gravity is only accounted for in the planet orbital motion. The addition of disk self-gravity slows down the planet drift but not enough to stop it.
△ Less
Submitted 10 March, 2005;
originally announced March 2005.
-
Accurate numerical potential and field in razor-thin axisymmetric discs
Authors:
Jean-Marc Hure,
Arnaud Pierens
Abstract:
We demonstrate the high accuracy of the density splitting method to compute the gravitational potential and field in the plane of razor-thin, axially symmetric discs, as preliminarily outlined in Pierens & Hure (2004).
Because residual kernels in Poisson integrals are not C^infinity-class functions, we use a dynamical space map** in order to increase the efficiency of advanced quadrature sch…
▽ More
We demonstrate the high accuracy of the density splitting method to compute the gravitational potential and field in the plane of razor-thin, axially symmetric discs, as preliminarily outlined in Pierens & Hure (2004).
Because residual kernels in Poisson integrals are not C^infinity-class functions, we use a dynamical space map** in order to increase the efficiency of advanced quadrature schemes. In terms of accuracy, results are better by orders of magnitude than for the classical FFT-methods.
△ Less
Submitted 11 January, 2005;
originally announced January 2005.
-
Star-disc interactions in a galactic centre and oblateness of the inner stellar cluster
Authors:
L. Subr,
V. Karas,
J. -M. Hure
Abstract:
Structure of a quasi-stationary stellar cluster is modelled assuming that it is embedded in the gravitational field of a super-massive black hole. Gradual orbital decay of stellar trajectories is caused by the dissipative interaction with an accretion disc. Gravitational field of the disc is constructed and its effect on the cluster structure is taken into account as an axially symmetric perturb…
▽ More
Structure of a quasi-stationary stellar cluster is modelled assuming that it is embedded in the gravitational field of a super-massive black hole. Gradual orbital decay of stellar trajectories is caused by the dissipative interaction with an accretion disc. Gravitational field of the disc is constructed and its effect on the cluster structure is taken into account as an axially symmetric perturbation. Attention is focused on a circumnuclear region (r<10^4 gravitational radii) where the effects of the central black hole and the disc dominate over the influence of an outer galaxy. It is shown how the stellar system becomes gradually flattened towards the disc plane. For certain combinations of the model parameters, a toroidal structure is formed by a fraction of stars. Growing anisotropy of stellar velocities as well as their segregation occur. The mass function of the inner cluster is modified and it progressively departs from the asymptotic form assumed in the outer cluster. A new stationary distribution can be characterized in terms of velocity dispersion of the stellar sample in the central region of the modified cluster.
△ Less
Submitted 3 August, 2004;
originally announced August 2004.
-
Turbulence in circumstellar disks
Authors:
F. Hersant,
B. Dubrulle,
J. -M. Hure
Abstract:
We investigate the analogy between circumstellar disks and the Taylor-Couette flow. Using the Reynolds similarity principle, the analogy results in a number of parameter-free predictions about stability of the disks, and their turbulent transport properties, provided the disk structure is available. We discuss how the latter can be deduced from interferometric observations of circumstellar mater…
▽ More
We investigate the analogy between circumstellar disks and the Taylor-Couette flow. Using the Reynolds similarity principle, the analogy results in a number of parameter-free predictions about stability of the disks, and their turbulent transport properties, provided the disk structure is available. We discuss how the latter can be deduced from interferometric observations of circumstellar material. We use the resulting disk structure to compute the molecular transport coefficients, including the effect of ionization by the central object. The resulting control parameter indicates that the disk is well into the turbulent regime. The analogy is also used to compute the effective accretion rate, as a function of the disk characteristic parameters (orbiting velocity, temperature and density). These values are in very good agreement with experimental, parameter-free predictions derived from the analogy. The turbulent viscosity is also computed and found to correspond to an $α$-parameter $2\times 10^{-4}<α<2\times 10^{-2}$. Predictions regarding fluctuations are also checked: luminosity fluctuations in disks do obey the same universal distribution as energy fluctuations observed in a laboratory turbulent flow. Radial velocity dispersion in the outer part of the disk is predicted to be of the order of 0.1 km/s, in agreement with available observations. All these issues provide a proof of the turbulent character of the circumstellar disks, as well as a parameter-free theoretical estimate of effective accretion rates.
△ Less
Submitted 19 July, 2004;
originally announced July 2004.
-
Gravitating discs around black holes
Authors:
V. Karas,
J. -M. Hure,
O. Semerak
Abstract:
Fluid discs and tori around black holes are discussed within different approaches and with the emphasis on the role of disc gravity. First reviewed are the prospects of investigating the gravitational field of a black hole--disc system by analytical solutions of stationary, axially symmetric Einstein's equations. Then, more detailed considerations are focused to middle and outer parts of extende…
▽ More
Fluid discs and tori around black holes are discussed within different approaches and with the emphasis on the role of disc gravity. First reviewed are the prospects of investigating the gravitational field of a black hole--disc system by analytical solutions of stationary, axially symmetric Einstein's equations. Then, more detailed considerations are focused to middle and outer parts of extended disc-like configurations where relativistic effects are small and the Newtonian description is adequate.
Within general relativity, only a static case has been analysed in detail. Results are often very inspiring, however, simplifying assumptions must be imposed: ad hoc profiles of the disc density are commonly assumed and the effects of frame-dragging and completely lacking. Astrophysical discs (e.g. accretion discs in active galactic nuclei) typically extend far beyond the relativistic domain and are fairly diluted. However, self-gravity is still essential for their structure and evolution, as well as for their radiation emission and the impact on the environment around. For example, a nuclear star cluster in a galactic centre may bear various imprints of mutual star--disc interactions, which can be recognised in observational properties, such as the relation between the central mass and stellar velocity dispersion.
△ Less
Submitted 16 January, 2004;
originally announced January 2004.
-
Rotation curves of galactic disks for arbitrary surface density profiles: a simple and efficient recipe
Authors:
A. Pierens,
J. -M. Huré
Abstract:
There is apparently a widespread belief that the gravitational field (and subsequently the rotation curve) ``inside'' razor-thin, axially symmetric disks can not be determined accurately from elliptic integrals because of the singular kernel in the Poisson integral. Here, we report a simple and powerful method to achieve this task numerically using the technique of ``density splitting''.
There is apparently a widespread belief that the gravitational field (and subsequently the rotation curve) ``inside'' razor-thin, axially symmetric disks can not be determined accurately from elliptic integrals because of the singular kernel in the Poisson integral. Here, we report a simple and powerful method to achieve this task numerically using the technique of ``density splitting''.
△ Less
Submitted 19 December, 2003;
originally announced December 2003.