-
Astronomical Spectroscopy with Skipper CCDs: First Results from a Skipper CCD Focal Plane Prototype at SIFS
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Brandon Roach,
Marco Bonati,
Abhishek Bakshi,
Julia Campa,
Gustavo Cancelo,
Braulio Cancino,
Claudio R. Chavez,
Fernando Chierchie,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen E. Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Eduardo Paolini,
Andrés A. Plazas Malagón,
Leandro Stefanazzi,
Javier Tiffenberg,
Ken Treptou,
Sho Uemura,
Neal Wilcer
Abstract:
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astro…
▽ More
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astronomical spectroscopy, i.e., single-sample readout noise < 4.3 e- rms/pixel, the ability to achieve multi-sample readout noise $\ll$ 1 e- rms/pixel, full-well capacities ~40,000-65,000 e-, low dark current and charge transfer inefficiency (~2 x 10$^{-4}$ e-/pixel/s and 3.44 x 10$^{-7}$, respectively), and an absolute quantum efficiency of $\gtrsim$ 80% between 450 nm and 980 nm ($\gtrsim$ 90% between 600 nm and 900 nm). We optimized the readout sequence timing to achieve sub-electron noise (~0.5 e- rms/pixel) in a region of 2k x 4k pixels and photon-counting noise (~0.22 e- rms/pixel) in a region of 220 x 4k pixels, each with a readout time of $\lesssim$ 17 min. We observed two quasars (HB89 1159+123 and QSO J1621-0042) at redshift z ~ 3.5, two high-redshift galaxy clusters (CL J1001+0220 and SPT-CL J2040-4451), an emission line galaxy at z = 0.3239, a candidate member star of the Boötes II ultra-faint dwarf galaxy, and five CALSPEC spectrophotometric standard stars (HD074000, HD60753, HD106252, HD101452, HD200654). We present charge-quantized, photon-counting observations of the quasar HB89 1159+123 and show the detector sensitivity increase for faint spectral features. We demonstrate signal-to-noise performance improvements for SIFS observations in the low-background, readout-noise-dominated regime. We outline scientific studies that will leverage the SIFS-Skipper CCD data and new detector architectures that utilize the Skipper floating gate amplifier with faster readout times.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Ultralight vector dark matter search using data from the KAGRA O3GK run
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
I. Abouelfettouh,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi
, et al. (1778 additional authors not shown)
Abstract:
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese…
▽ More
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Characterization and Optimization of Skipper CCDs for the SOAR Integral Field Spectrograph
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Andrés A. Plazas Malagón,
Abhishek Bakshi,
Marco Bonati,
Julia Campa,
Braulio Cancino,
Claudio R. Chavez,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Javier Tiffenberg
Abstract:
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside pro…
▽ More
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside processed, and treated with an antireflective coating. We optimize readout time to achieve $<4.3$ e$^-$ rms/pixel in a single non-destructive readout and $0.5$ e$^-$ rms/pixel in $5 \%$ of the detector. We demonstrate single-photon counting with $N_{\rm samp}$ = 400 ($σ_{\rm 0e^-} \sim$ 0.18 e$^-$ rms/pixel) for all 24 amplifiers (four amplifiers per detector). We also perform conventional CCD characterization measurements such as cosmetic defects ($ <0.45 \%$ ``bad" pixels), dark current ($\sim 2 \times 10^{-4}$ e$^-$/pixel/sec.), charge transfer inefficiency ($3.44 \times 10^{-7}$ on average), and charge diffusion (PSF $< 7.5 μ$m). We report on characterization and optimization measurements that are only enabled by photon-counting. Such results include voltage optimization to achieve full-well capacities $\sim 40,000-63,000$ e$^-$ while maintaining photon-counting capabilities, clock induced charge optimization, non-linearity measurements at low signals (few tens of electrons). Furthermore, we perform measurements of the brighter-fatter effect and absolute quantum efficiency ($\gtrsim\, 80 \%$ between 450 nm and 980 nm; $\gtrsim\,90 \%$ between 600 nm and 900 nm) using Skipper CCDs.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi
, et al. (1750 additional authors not shown)
Abstract:
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effect…
▽ More
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass $M>70$ $M_\odot$) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities $0 < e \leq 0.3$ at $0.33$ Gpc$^{-3}$ yr$^{-1}$ at 90\% confidence level.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
Transient glitch mitigation in Advanced LIGO data with $\textit{glitschen}$
Authors:
Jonathan Merritt,
Ben Farr,
Rachel Hur,
Bruce Edelman,
Zoheyr Doctor
Abstract:
"Glitches" -- transient noise artifacts in the data collected by gravitational wave interferometers like LIGO and Virgo -- are an ever-present obstacle for the search and characterization of gravitational wave signals. With some having morphology similar to high mass, high mass-ratio, and extreme-spin binary black hole events, they limit sensitivity to such sources. They can also act as a contamin…
▽ More
"Glitches" -- transient noise artifacts in the data collected by gravitational wave interferometers like LIGO and Virgo -- are an ever-present obstacle for the search and characterization of gravitational wave signals. With some having morphology similar to high mass, high mass-ratio, and extreme-spin binary black hole events, they limit sensitivity to such sources. They can also act as a contaminant for all sources, requiring targeted mitigation before astrophysical inferences can be made. We propose a data driven, parametric model for frequently encountered glitch types using probabilistic principal component analysis. As a noise analog of parameterized gravitational wave signal models, it can be easily incorporated into existing search and detector characterization techniques. We have implemented our approach with the open source glitschen package. Using LIGO's currently most problematic glitch types, the 'blip' and 'tomte', we demonstrate that parametric models of modest dimension can be constructed and used for effective mitigation in both frequentist and Bayesian analyses.
△ Less
Submitted 19 January, 2022; v1 submitted 26 August, 2021;
originally announced August 2021.
