Showing 1–5 of 5 results for author: Hultgren, E

The Design of a Drag-Free CubeSat and the Housing for its Gravitational Reference Sensor

Authors: Carlo Zanoni, Abdul Alfauwaz, Ahmad Aljadaan, Salman Althubiti, Karthik Balakrishnan, Sasha Buchman, Robert L. Byer, John W. Conklin, Grant D. Cutler, Dan DeBra, Eric Hultgren, John A. Lipa, Shailendhar Saraf, Andreas Zoellner

Abstract: A Drag-Free CubeSat mission has been proposed to demonstrate the feasibility of a Gravitational Reference Sensor (GRS) with an optical readout for a 3 units (3U) spacecraft. A purely drag-free object is defined by the absence of all external forces other than gravity, which are shielded by the spacecraft. In a real case, the TM will still be affected by disturbances. Several of them are passively… ▽ More A Drag-Free CubeSat mission has been proposed to demonstrate the feasibility of a Gravitational Reference Sensor (GRS) with an optical readout for a 3 units (3U) spacecraft. A purely drag-free object is defined by the absence of all external forces other than gravity, which are shielded by the spacecraft. In a real case, the TM will still be affected by disturbances. Several of them are passively reduced by the design of the TM housing. This system is a thick-walled aluminium box that holds the shadow sensors and shields the TM. The housing has an effect on the mechanical, thermal and magnetic environment around the TM. All of them have been analysed. The mechanical vibrations have to fit the launch environment and the modes have to be outside of the measurement range (0.0001 - 1 Hz). The magnetic field has to be reduced by a 0.01 factor. The temperature difference between internal opposing surfaces, determining pressure on the TM, has to be below 10^-3(1 mHz/f)1/3 K Hz^-1/2. The housing, together with the TM, the sensors and the UV LEDs for charging control, constitutes the GRS, which would then fit into a 1U. The other 2Us are occupied by the caging mechanism that constraints the TM during launch, the thrusters, the Attitude Determination And Control System (ADACS) and the electronics. The Drag-Free CubeSat will be the result of the combined efforts of Stanford, University of Florida, KACST and NASA and will be the first drag-free mission with an optical readout and the first GRS designed within the limits of a 3U small satellite. In the first section, this paper briefly updates on the main characteristics and systems of the project. Particular emphasis is then given to the recently designed housing, its expected performance and the open issues. △ Less

Submitted 18 May, 2016; originally announced May 2016.

Comments: 2nd IAA conference on University Satellites. Proceedings of 2nd IAA conference on University Satellites, 2013

Report number: IAA-CU-13-12-01

LISA-2020: An Intermediate Scale Space Gravitational Wave Observatory for This Decade

Authors: S. Buchman, J. A. Lipa, R. L. Byer, D. DeBra, K. Balakrishnan, G. Dufresne Cutler, A. Al-Fauwaz, E. Hultgren, A. K. Al-Jadaan, S. Saraf, S. Tan, S. Al-Thubiti, A. Zoellner

Abstract: Over the last three decades, an exceptionally good science case has been made for pursuing gravitational wave (GW) astronomy. This has engendered a worldwide effort to detect the extremely weak signals generated by expected sources. With the next round of upgrades the ground based instruments are likely to make the first detections of the sources, and a new era of astronomy will begin, possibly as… ▽ More Over the last three decades, an exceptionally good science case has been made for pursuing gravitational wave (GW) astronomy. This has engendered a worldwide effort to detect the extremely weak signals generated by expected sources. With the next round of upgrades the ground based instruments are likely to make the first detections of the sources, and a new era of astronomy will begin, possibly as early as 2017. Inconveniently, due to seismic noise and baseline length issues, the low frequency (<10Hz) part of the spectrum, where the most interesting events are expected, will not be accessible. The space-based detector, LISA1, was conceived to fill this gap extending the observational capability to about 10-4 Hz. Due to mission cost growth and severe budget constraints, a flight prior to 2030 now seems very unlikely. This paper examines the case for a scaled down mission that is comparable in cost and duration to medium scale astrophysics missions such as the 1978 ($630M) Einstein (HEAO 2) x-ray Observatory2, the 1989 ($680M) COBE Cosmic Background Explorer3, and the 1999 ($420M) FUSE Far Ultraviolet Spectroscopic Explorer4. We find that a mission of this class is possible if the measurement requirements are somewhat relaxed and a baseline smaller than LISA is used. It appears that such a mission could be launched by 2020 using a conventional program development plan, possibly including international collaboration. It would enable the timely development of this game-changing field of astrophysics, complementing the expected ground results with observations of massive black hole collisions. It would also serve as a step** stone to LISA, greatly reducing the risk profile of that mission. △ Less

Submitted 10 February, 2013; originally announced February 2013.

Integrated Differential Optical Shadow Sensor for Modular Gravitational Reference Sensor

Authors: Andreas Zoellner, Eric Hultgren, Ke-Xun Sun

Abstract: The Laser Interferometer Space Antenna (LISA) is a proposed space mission for the detection of gravitational waves. It consists of three drag-free satellites flying in a triangular constellation. A gravitational reference sensor is used in conjunction with a laser interferometer to measure the distance between test masses inside the three satellites. Other future space mission such as DECIGO and B… ▽ More The Laser Interferometer Space Antenna (LISA) is a proposed space mission for the detection of gravitational waves. It consists of three drag-free satellites flying in a triangular constellation. A gravitational reference sensor is used in conjunction with a laser interferometer to measure the distance between test masses inside the three satellites. Other future space mission such as DECIGO and BBO also require a gravitational reference sensor. The Modular Gravitational Reference Sensor (MGRS) is being designed for these purposes and consists of two different optical sensors and a UV LED charge management system. The Differential Optical Shadow Sensor (DOSS) is one of the optical sensors and measures the position of a spherical test mass with respect to the surrounding satellite. This measurement is used for the drag-free feedback control loop. This paper describes the most recent, third generation of the experimental setup for the DOSS that uses a fiber coupled super luminescent LED, an integrated mounting structure and lock-in amplification. The achieved sensitivity is 10 nm/Hz^(1/2) above 300 mHz, and 20 nm/Hz^(1/2) for frequencies above 30 mHz. △ Less

Submitted 6 February, 2013; originally announced February 2013.

Comments: 8th International LISA Symposium, Stanford University, California, USA

UV LED charge control of an electrically isolated proof mass in a Gravitational Reference Sensor configuration at 255 nm

Authors: Karthik Balakrishnan, Ke-Xun Sun, Abdul Alfauwaz, Ahmad Aljadaan, Mohammed Almajeed, Muflih Alrufaydah, Salman Althubiti, Homoud Aljabreen, Sasha Buchman, Robert L Byer, John Conklin, Daniel DeBra, John Hanson, Eric Hultgren, Turki Al Saud, Seiya Shimizu, Michael Soulage, Andreas Zoellner

Abstract: Precise control over the potential of an electrically isolated proof mass is necessary for the operation of devices such as a Gravitational Reference Sensor (GRS) and satellite missions such as LISA. We show that AlGaN UV LEDs operating at 255 nm are an effective substitute for Mercury vapor lamps used in previous missions because of their ability to withstand space qualification levels of vibrati… ▽ More Precise control over the potential of an electrically isolated proof mass is necessary for the operation of devices such as a Gravitational Reference Sensor (GRS) and satellite missions such as LISA. We show that AlGaN UV LEDs operating at 255 nm are an effective substitute for Mercury vapor lamps used in previous missions because of their ability to withstand space qualification levels of vibration and thermal cycling. After 27 thermal and thermal vacuum cycles and 9 minutes of 14.07 g RMS vibration, there is less than 3% change in current draw, less than 15% change in optical power, and no change in spectral peak or FWHM (full width at half maximum). We also demonstrate UV LED stimulated photoemission from a wide variety of thin film carbide proof mass coating candidates (SiC, Mo2C, TaC, TiC, ZrC) that were applied using electron beam evaporation on an Aluminum 6061-T6 substrate. All tested carbide films have measured quantum efficiencies of 3.8-6.8*10^-7 and reflectivities of 0.11-0.15, which compare favorably with the properties of previously used gold films. We demonstrate the ability to control proof mass potential on an 89 mm diameter spherical proof mass over a 20 mm gap in a GRS-like configuration. Proof mass potential was measured via a non-contact DC probe, which would allow control without introducing dynamic forcing of the spacecraft. Finally we provide a look ahead to an upcoming technology demonstration mission of UV LEDs and future applications toward charge control of electrically isolated proof masses. △ Less

Submitted 2 February, 2012; originally announced February 2012.

Comments: 14 pages, 11 figures

LAGRANGE: LAser GRavitational-wave ANtenna at GEo-lunar Lagrange points

Authors: J. W. Conklin, S. Buchman, V. Aguero, A. Alfauwaz, A. Aljadaan, M. Almajed, H. Altwaijry, T. Al-Saud, K. Balakrishnan, R. L. Byer, K. Bower, B. Costello, G. D. Cutler, D. B. DeBra, D. M. Faied, C. Foster, A. L. Genova, J. Hanson, K. Hooper, E. Hultgren, B. Jaroux, A. Klavins, B. Lantz, J. A. Lipa, A. Palmer , et al. (14 additional authors not shown)

Abstract: We describe a new space gravitational wave observatory design called LAGRANGE that maintains all important LISA science at about half the cost and with reduced technical risk. It consists of three drag-free spacecraft in the most stable geocentric formation, the Earth-Moon L3, L4, and L5 Lagrange points. Fixed antennas allow continuous contact with the Earth, solving the problem of communications… ▽ More We describe a new space gravitational wave observatory design called LAGRANGE that maintains all important LISA science at about half the cost and with reduced technical risk. It consists of three drag-free spacecraft in the most stable geocentric formation, the Earth-Moon L3, L4, and L5 Lagrange points. Fixed antennas allow continuous contact with the Earth, solving the problem of communications bandwidth and latency. A 70 mm diameter AuPt sphere with a 35 mm gap to its enclosure serves as a single inertial reference per spacecraft, which is operated in "true" drag-free mode (no test mass forcing). This is the core of the Modular Gravitational Reference Sensor whose other advantages are: a simple caging design based on the DISCOS 1972 drag-free mission, an all optical read-out with pm fine and nm coarse sensors, and the extensive technology heritage from the Honeywell gyroscopes, and the DISCOS and Gravity Probe B drag-free sensors. An Interferometric Measurement System, designed with reflective optics and a highly stabilized frequency standard, performs the inter-test mass ranging and requires a single optical bench with one laser per spacecraft. Two 20 cm diameter telescopes per spacecraft, each with in-field pointing, incorporate novel technology developed for advanced optical systems by Lockheed Martin, who also designed the spacecraft based on a multi-flight proven bus structure. Additional technological advancements include the drag-free propulsion, thermal control, charge management systems, and materials. LAGRANGE sub-systems are designed to be scalable and modular, making them interchangeable with those of LISA or other gravitational science missions. We plan to space qualify critical technologies on small and nano satellite flights, with the first launch (UV-LED Sat) in 2013. △ Less

Submitted 5 December, 2011; v1 submitted 22 November, 2011; originally announced November 2011.

Comments: 24 pages, to be submitted to Classical and Quantum Gravity