Showing 1–27 of 27 results for author: Huda, M

Theory of Periodically Time-Variant Linear Systems

Authors: Juan I. Bonetti, Agustín C. Galletto, Mario R. Hueda

Abstract: In this work we provide a mathematical framework to describe the periodically time variant (PTV) linear systems. We study their frequency-domain features to estimate the output bandwidth, a necessary value to obtain a suitable digital representation of such systems. In addition, we derive several interesting properties enabling useful equivalences to represent, simulate and compensate PTVs. In this work we provide a mathematical framework to describe the periodically time variant (PTV) linear systems. We study their frequency-domain features to estimate the output bandwidth, a necessary value to obtain a suitable digital representation of such systems. In addition, we derive several interesting properties enabling useful equivalences to represent, simulate and compensate PTVs. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 5 pages of mathematical theory of PTVs

Design and Experimental Verification of a Novel Error-Backpropagation-Based Background Calibration for Time Interleaved ADC in Digital Communication Receivers

Authors: Fredy Solis, Benjamín T. Reyes, Damián A. Morero, Mario R. Hueda

Abstract: A novel background calibration technique for Time-Interleaved Analog-to-Digital Converters (TI-ADCs) is presented in this paper. This technique is applicable to equalized digital communication receivers. As shown by Tsai et al. [1] and Luna et al. [2], in a digital receiver it is possible to treat the TI-ADC errors as part of the communication channel and take advantage of the adaptive equalizer t… ▽ More A novel background calibration technique for Time-Interleaved Analog-to-Digital Converters (TI-ADCs) is presented in this paper. This technique is applicable to equalized digital communication receivers. As shown by Tsai et al. [1] and Luna et al. [2], in a digital receiver it is possible to treat the TI-ADC errors as part of the communication channel and take advantage of the adaptive equalizer to compensate them. Therefore calibration becomes an integral part of the channel equalization. No special purpose analog or digital calibration blocks or algorithms are required. However, there is a large class of receivers where the equalization technique cannot be directly applied because other signal processing blocks are located between the TI-ADC and the equalizer. The technique presented here generalizes earlier works to this class of receivers. The error backpropagation algorithm, traditionally used in machine learning, is applied to the error computed at the receiver slicer and used to adapt an auxiliary equalizer adjacent to the TI-ADC, called the Compensation Equalizer (CE). Simulations using a dual polarization optical coherent receiver model demonstrate accurate and robust mismatch compensation across different application scenarios. Several Quadrature Amplitude Modulation (QAM) schemes are tested in simulations and experimentally. Measurements on an emulation platform which includes an 8 bit, 4 GS/s TI-ADC prototype chip fabricated in 130nm CMOS technology, show an almost ideal mitigation of the impact of the mismatches on the receiver performance when 64-QAM and 256-QAM schemes are tested. An absolute improvement in the TI-ADC performance of $\sim$15 dB in both SNDR and SFDR is measured. △ Less

Submitted 10 April, 2022; originally announced April 2022.

Comments: 15 pages, 26 figures. arXiv admin note: text overlap with arXiv:2008.02914

Linear Channel Estimation Based on a Low-Bandwidth Observation Channel with Unknown Response

Authors: Juan I. Bonetti, James Kunst, Damián A. Morero, Mario R. Hueda

Abstract: We propose a novel system identification technique, based on a least-mean square algorithm, allowing for the estimation of a linear channel by using an unknown-response measurement channel. The key of the technique is a memoryless nonlinear function working as uncoupling block between the estimated and observation channels, conforming a Wiener-Hammerstein scheme. We prove that this estimation, onl… ▽ More We propose a novel system identification technique, based on a least-mean square algorithm, allowing for the estimation of a linear channel by using an unknown-response measurement channel. The key of the technique is a memoryless nonlinear function working as uncoupling block between the estimated and observation channels, conforming a Wiener-Hammerstein scheme. We prove that this estimation, only differing from the actual channel response by a scaling factor and a temporal shift, does not depend on the observation channel bandwidth. As a consequence, this technique enables the usage of low-cost measurement devices as feedback channel. We present numerical examples of the method, supporting the proposal and displaying excellent results. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Comments: 8 pages, 7 figures, journal manuscript

Superscalar Parallel Carrier Phase Recovery with Transmitter I/Q Imbalance Compensation

Authors: Daniel R. García, Mario R. Hueda

Abstract: We propose a superscalar parallel two-stage carrier phase recovery architecture to improve the performance of optical coherent receivers in the presence of Tx I/Q imbalance, Tx I/Q skew, and laser frequency fluctuations. We propose a superscalar parallel two-stage carrier phase recovery architecture to improve the performance of optical coherent receivers in the presence of Tx I/Q imbalance, Tx I/Q skew, and laser frequency fluctuations. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Byakto Speech: Real-time long speech synthesis with convolutional neural network: Transfer learning from English to Bangla

Authors: Zabir Al Nazi, Sayed Mohammed Tasmimul Huda

Abstract: Speech synthesis is one of the challenging tasks to automate by deep learning, also being a low-resource language there are very few attempts at Bangla speech synthesis. Most of the existing works can't work with anything other than simple Bangla characters script, very short sentences, etc. This work attempts to solve these problems by introducing Byakta, the first-ever open-source deep learning-… ▽ More Speech synthesis is one of the challenging tasks to automate by deep learning, also being a low-resource language there are very few attempts at Bangla speech synthesis. Most of the existing works can't work with anything other than simple Bangla characters script, very short sentences, etc. This work attempts to solve these problems by introducing Byakta, the first-ever open-source deep learning-based bilingual (Bangla and English) text to a speech synthesis system. A speech recognition model-based automated scoring metric was also proposed to evaluate the performance of a TTS model. We also introduce a test benchmark dataset for Bangla speech synthesis models for evaluating speech quality. The TTS is available at https://github.com/zabir-nabil/bangla-tts △ Less

Submitted 31 May, 2021; originally announced June 2021.

First principles studies of the surface and opto-electronic properties of ultra-thin t-Se

Authors: S. K. Barman, M. N. Huda, J. Asaadi, E. Gramellini, D. Nygren

Abstract: Selenium is a crucial earth-abundant and non-toxic semiconductor with a wide range of applications across the semiconductor industries. Selenium has drawn attention from scientific communities for its wide range of applicability: from photovoltaics to imaging devices. Its usage as a photosensitive material largely involves the synthesis of the amorphous phase (a-Se) via various experimental techni… ▽ More Selenium is a crucial earth-abundant and non-toxic semiconductor with a wide range of applications across the semiconductor industries. Selenium has drawn attention from scientific communities for its wide range of applicability: from photovoltaics to imaging devices. Its usage as a photosensitive material largely involves the synthesis of the amorphous phase (a-Se) via various experimental techniques. However, the ground state crystalline phase of this material, known as the trigonal selenium (\textit{t}-Se), is not extensively studied for its optimum electronic and optical properties. In this work, we present density functional theory (DFT) based systematic studies on the ultra-thin $(10\overline{1}0)$ surface slabs of \textit{t}-Se. We report the surface energies, work function, electronic and optical properties as a function of number of layers for $(10\overline{1}0)$ surface slabs to access its suitability for applications as a photosensitive material. △ Less

Submitted 29 April, 2021; originally announced April 2021.

Investigating Quality of Institutional Repository Website Design Using Usability Testing Framework

Authors: Aang Subiyakto, Yuliza Rahmi, Nia Kumaladewi, M. Qomarul Huda, Nidaul Hasanati, Tri Haryanto

Abstract: Quality of website design is one of the influential factors of website success. How the design helps the users using effectively and efficiently website and satisfied at the end of the use. However, it is a common tendency that websites are designed based on the developer's perspectives and lack considering user importance. Thus, the degree of website usability tends to be low according to user pe… ▽ More Quality of website design is one of the influential factors of website success. How the design helps the users using effectively and efficiently website and satisfied at the end of the use. However, it is a common tendency that websites are designed based on the developer's perspectives and lack considering user importance. Thus, the degree of website usability tends to be low according to user perceptions. This study purposed to understand the user experiences using an institutional repository (IR) website in a public university in Indonesia. The research was performed based on usability testing framework as the usability testing method. About 12 participants were purposely involved concerning their key informant characteristics. Following three empirical data collection techniques (i.e., query technique, formal experiment, and thinking aloud), both descriptive analysis using usability scale matric and content analysis using qualitative data analysis (QDA) Miner Lite software were used in the data analysis stage. Lastly, several visual design recommendations were then proposed at the end of the study. In terms of a case study, besides the practical recommendations which may contextually useful for the next website development; the clarity of the research design may also help scholars how to combine more than one usability testing technique within a multi-technique study design. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Comments: 7 pages, The 2nd International Science and Mathematics Conference (SMIC 2020) : Transforming Research and Education of Science and Mathematics in the Digital Age

Moiré-enabled topological superconductivity

Authors: Shawulienu Kezilebieke, Viliam Vaňo, Md N. Huda, Markus Aapro, Somesh Chandra Ganguli, Peter Liljeroth, Jose L. Lado

Abstract: The search for artificial topological superconductivity has been limited by the stringent conditions required for its emergence. As exemplified by the recent discoveries of various correlated electronic states in twisted van der Waals materials, moiré patterns can act as a powerful knob to create artificial electronic structures. Here, we demonstrate that a moiré pattern between a van der Waals su… ▽ More The search for artificial topological superconductivity has been limited by the stringent conditions required for its emergence. As exemplified by the recent discoveries of various correlated electronic states in twisted van der Waals materials, moiré patterns can act as a powerful knob to create artificial electronic structures. Here, we demonstrate that a moiré pattern between a van der Waals superconductor and a monolayer ferromagnet creates a periodic potential modulation that enables the realization of a topological superconducting state that would not be accessible in the absence of the moiré. The magnetic moiré pattern gives rise to Yu-Shiba-Rusinov minibands and periodic modulation of the Majorana edge modes that we detect using low-temperature scanning tunneling microscopy (STM) and spectroscopy (STS). Moiré patterns and, more broadly, periodic potential modulations are powerful tools to overcome the conventional constrains for realizing and controlling topological superconductivity. △ Less

Submitted 4 January, 2022; v1 submitted 19 November, 2020; originally announced November 2020.

Comments: 6 pages, 4 figures

Journal ref: Nano Lett. 2022, 22, 1, 328-333

Electronic and magnetic characterization of epitaxial CrBr$_3$ monolayers

Authors: Shawulienu Kezilebieke, Orlando J. Silveira, Md N. Huda, Viliam Vaňo, Markus Aapro, Somesh Chandra Ganguli, Jouko Lahtinen, Rhodri Mansell, Sebastiaan van Dijken, Adam S. Foster, Peter Liljeroth

Abstract: The ability to imprint a given material property to another through proximity effect in layered two-dimensional materials has opened the way to the creation of designer materials. Here, we use molecular-beam epitaxy (MBE) for a direct synthesis of a superconductor-magnet hybrid heterostructure by combining superconducting niobium diselenide (NbSe$_2$) with the monolayer ferromagnetic chromium trib… ▽ More The ability to imprint a given material property to another through proximity effect in layered two-dimensional materials has opened the way to the creation of designer materials. Here, we use molecular-beam epitaxy (MBE) for a direct synthesis of a superconductor-magnet hybrid heterostructure by combining superconducting niobium diselenide (NbSe$_2$) with the monolayer ferromagnetic chromium tribromide (CrBr$_3$). Using different characterization techniques and density-functional theory (DFT) calculations, we have confirmed that the CrBr$_3$ monolayer retains its ferromagnetic ordering with a magnetocrystalline anisotropy favoring an out-of-plane spin orientation. Low-temperature scanning tunneling microscopy (STM) measurements show a slight reduction of the superconducting gap of NbSe$_2$ and the formation of a vortex lattice on the CrBr$_3$ layer in experiments under an external magnetic field. Our results contribute to the broader framework of exploiting proximity effects to realize novel phenomena in 2D heterostructures. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Journal ref: Adv. Mater. 33, 2006850 (2021)

On the Application of Error Backpropagation to the Background Calibration of Time Interleaved ADC for Digital Communication Receivers

Authors: Fredy Solis, Benjamín T. Reyes, Damián A. Morero, Mario R. Hueda

Abstract: This paper introduces a backpropagation-based technique for the calibration of the mismatch errors of time-interleaved analog to digital converters (TI-ADCs). This technique is applicable to digital receivers such as those used in coherent optical communications. The error at the slicer of the receiver is processed using a modified version of the well known backpropagation algorithm from machine l… ▽ More This paper introduces a backpropagation-based technique for the calibration of the mismatch errors of time-interleaved analog to digital converters (TI-ADCs). This technique is applicable to digital receivers such as those used in coherent optical communications. The error at the slicer of the receiver is processed using a modified version of the well known backpropagation algorithm from machine learning. The processed slicer error can be directly applied to compensate the TI-ADC mismatch errors with an adaptive equalizer, or it can be used to digitally estimate and correct said mismatch errors using analog techniques such as delay cells and programmable gain amplifiers (PGA). The main advantages of the technique proposed here compared to prior art are its robustness, its speed of convergence, and the fact that it always works in background mode, independently of the oversampling factor and the properties of the input signal, as long as the receiver converges. Moreover, this technique enables the joint compensation of impairments not addressed by traditional TI-ADC calibration techniques, such as I/Q skew in quadrature modulation receivers. Simulations are presented to demonstrate the effectiveness of the technique, and low complexity implementation options are discussed. △ Less

Submitted 6 August, 2020; originally announced August 2020.

Comments: 11 pages, 15 figures

Original Research By Young Twinkle Students (ORBYTS): Ephemeris Refinement of Transiting Exoplanets II

Authors: Billy Edwards, Lara Anisman, Quentin Changeat, Mario Morvan, Sam Wright, Kai Hou Yip, Amiira Abdullahi, Jesmin Ali, Clarry Amofa, Antony Antoniou, Shahad Arzouni, Noeka Bradley, Dayanara Campana, Nandini Chavda, Jessy Creswell, Neliman Gazieva, Emily Gudgeon-Sidelnikova, Pratap Guha, Ella Hayden, Mohammed Huda, Hana Hussein, Ayub Ibrahim, Chika Ike, Salma Jama, Bhavya Joshi , et al. (38 additional authors not shown)

Abstract: We report follow-up observations of four transiting exoplanets, TRES-2b, HAT-P-22b, HAT-P-36b and XO-2b, as part of the Original Research By Young Twinkle Students (ORBYTS) programme. These observations were taken using the Las Cumbres Observatory Global Telescope Network's (LCOGT) robotic 0.4 m telescopes and were analysed using the HOlomon Photometric Software (HOPS). Such observations are key f… ▽ More We report follow-up observations of four transiting exoplanets, TRES-2b, HAT-P-22b, HAT-P-36b and XO-2b, as part of the Original Research By Young Twinkle Students (ORBYTS) programme. These observations were taken using the Las Cumbres Observatory Global Telescope Network's (LCOGT) robotic 0.4 m telescopes and were analysed using the HOlomon Photometric Software (HOPS). Such observations are key for ensuring accurate transit times for upcoming telescopes, such as the James Webb Space Telescope (JWST), Twinkle and Ariel, which may seek to characterise the atmospheres of these planets. The data have been uploaded to ExoClock and a significant portion of this work has been completed by secondary school students in London. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Comments: Published in the Research Notes of the American Astronomical Society (RNAAS)

Journal ref: Res. Notes AAS 4 109 (2020)

Adaptive Background Compensation of FI-DACs with Application to Coherent Optical Transceivers

Authors: Agustín C. Galetto, Benjamín T. Reyes, Damián A. Morero, Mario R. Hueda

Abstract: This work proposes a novel adaptive background compensation scheme for frequency interleaved digital-to-analog converters (FI-DACs). The technique is applicable to high speed digital transceivers such as those used in coherent optical communications. Although compensation of FI-DACs has been discussed before in the technical literature, adaptive background techniques have not yet been reported. Th… ▽ More This work proposes a novel adaptive background compensation scheme for frequency interleaved digital-to-analog converters (FI-DACs). The technique is applicable to high speed digital transceivers such as those used in coherent optical communications. Although compensation of FI-DACs has been discussed before in the technical literature, adaptive background techniques have not yet been reported. The importance of the latter lies in their capability to automatically compensate errors caused by process, voltage, and temperature variations in the echnology (e.g., CMOS, SiGe, etc.) implementations of the data converters, and therefore ensure high manufacturing yield. The key ingredients of the proposed technique are a multiple-input multiple-output (MIMO) equalizer and the backpropagation algorithm used to adapt the coefficients of the aforementioned equalizer. Simulations show that the impairments of the analog signal path are accurately compensated and their effect is essentially eliminated, resulting in a high performance transmitter system. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Comments: 6 pages, 11 figures

Designer Flat Bands in Quasi-One-Dimensional Atomic Lattices

Authors: Md Nurul Huda, Shawulienu Kezilebieke, Peter Liljeroth

Abstract: Certain lattices with specific geometries have one or more spectral bands that are strictly flat, i.e. the electron energy is independent of the momentum. This can occur robustly irrespective of the specific couplings between the lattices sites due to the lattice symmetry, or it can result from fine-tuned couplings between the lattice sites. While the theoretical picture behind flat electronic ban… ▽ More Certain lattices with specific geometries have one or more spectral bands that are strictly flat, i.e. the electron energy is independent of the momentum. This can occur robustly irrespective of the specific couplings between the lattices sites due to the lattice symmetry, or it can result from fine-tuned couplings between the lattice sites. While the theoretical picture behind flat electronic bands is well-developed, experimental realization of these lattices has proven challenging. Utilizing scanning tunnelling microscopy (STM) and spectroscopy (STS), we manipulate individual vacancies in a chlorine monolayer on Cu(100) to construct various atomically precise 1D lattices with engineered flat bands. We realize experimentally both gapped and gapless flat band systems with single or multiple flat bands. We also demonstrate tuneability of the energy of the flat bands and how they can be switched "on" and "off" by breaking and restoring the symmetry of the lattice geometry. The experimental findings are corroborated by tight-binding calculations. Our results constitute the first experimental realizations of engineered flat bands in a 1D solid-state system and pave the way towards the construction of e.g. topological flat band systems and experimental tests of flat-band-assisted superconductivity in a fully controlled system. △ Less

Submitted 25 November, 2020; v1 submitted 18 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Research 2, 043426 (2020)

Topological superconductivity in a van der Waals heterostructure

Authors: Shawulienu Kezilebieke, Md Nurul Huda, Viliam Vaňo, Markus Aapro, Somesh C. Ganguli, Orlando J. Silveira, Szczepan Głodzik, Adam S. Foster, Teemu Ojanen, Peter Liljeroth

Abstract: The designer approach has become a new paradigm in accessing novel quantum phases of matter. Moreover, the realization of exotic states such as topological insulators, superconductors and quantum spin liquids often poses challenging or even contradictory demands for any single material. For example, it is presently unclear if topological superconductivity, which has been suggested as a key ingredi… ▽ More The designer approach has become a new paradigm in accessing novel quantum phases of matter. Moreover, the realization of exotic states such as topological insulators, superconductors and quantum spin liquids often poses challenging or even contradictory demands for any single material. For example, it is presently unclear if topological superconductivity, which has been suggested as a key ingredient for topological quantum computing, exists at all in any naturally occurring material . This problem can be circumvented by using designer heterostructures combining different materials, where the desired physics emerges from the engineered interactions between the different components. Here, we employ the designer approach to demonstrate two major breakthroughs - the fabrication of van der Waals (vdW) heterostructures combining 2D ferromagnetism with superconductivity and the observation of 2D topological superconductivity. We use molecular-beam epitaxy (MBE) to grow two-dimensional islands of ferromagnetic chromium tribromide (CrBr$_3$) on superconducting niobium diselenide (NbSe$_2$) and show the signatures of one-dimensional Majorana edge modes using low-temperature scanning tunneling microscopy (STM) and spectroscopy (STS). The fabricated two-dimensional vdW heterostructure provides a high-quality controllable platform that can be integrated in device structures harnessing topological superconductivity. Finally, layered heterostructures can be readily accessed by a large variety of external stimuli potentially allowing external control of 2D topological superconductivity through electrical, mechanical, chemical, or optical means. △ Less

Submitted 5 March, 2021; v1 submitted 6 February, 2020; originally announced February 2020.

Journal ref: Nature 588, 424-428 (2020)

Electronic and Magnetic Characterization of Epitaxial VSe$_2$ Monolayers on Superconducting NbSe$_2$

Authors: Shawulienu Kezilebieke, Md Nurul Huda, Paul Dreher, Ilkka Manninen, Yifan Zhou, Jani Sainio, Rhodri Mansell, Miguel M. Ugeda, Sebastiaan van Dijken, Hannu-Pekka Komsa, Peter Liljeroth

Abstract: Vertical integration of two-dimensional (2D) van der Waals (vdW) materials with different quantum ground states is predicted to lead to novel electronic properties that are not found in the constituent layers. Here, we present the direct synthesis of superconductor-magnet hybrid heterostructures by combining superconducting niobium diselenide (NbSe$_2$) with the monolayer (ML) vanadium diselenide… ▽ More Vertical integration of two-dimensional (2D) van der Waals (vdW) materials with different quantum ground states is predicted to lead to novel electronic properties that are not found in the constituent layers. Here, we present the direct synthesis of superconductor-magnet hybrid heterostructures by combining superconducting niobium diselenide (NbSe$_2$) with the monolayer (ML) vanadium diselenide (VSe$_2$). More significantly, the in-situ growth in ultra-high vacuum (UHV) allows to produce a clean and an atomically sharp interfaces. Combining different characterization techniques and density-functional theory (DFT) calculations, we investigate the electronic and magnetic properties of VSe$_2$ on NbSe$_2$. Low temperature scanning tunneling microscopy (STM) measurements demonstrate a reduction of the superconducting gap on VSe$_2$ layer. This together with the lack of charge density wave signatures indicates magnetization of the sheet, but not of a conventional itinerant ferromagnet. △ Less

Submitted 12 November, 2019; v1 submitted 23 September, 2019; originally announced September 2019.

Journal ref: Commun. Phys. 3, 116 (2020)

Tuneable topological domain wall states in engineered atomic chains

Authors: Md Nurul Huda, Shawulienu Kezilebieke, Teemu Ojanen, Robert Drost, Peter Liljeroth

Abstract: Topological modes in one- and two-dimensional systems have been proposed for numerous applications utilizing their exotic electronic responses. The zero-energy, topologically protected end modes can be realized in the Su-Schrieffer-Heeger (SSH) model, which has been experimentally implemented in atomic-scale solid-state structures and in ultra-cold atomic gases. While the edge modes in the SSH mod… ▽ More Topological modes in one- and two-dimensional systems have been proposed for numerous applications utilizing their exotic electronic responses. The zero-energy, topologically protected end modes can be realized in the Su-Schrieffer-Heeger (SSH) model, which has been experimentally implemented in atomic-scale solid-state structures and in ultra-cold atomic gases. While the edge modes in the SSH model are at exactly the mid-gap energy, other paradigmatic 1D models such as trimer and coupled dimer chains have non-zero energy boundary states. However, these chains have not been realized in an atomically tuneable system that would allow explicit control of the edge modes. Here, we demonstrate atomically controlled trimer and coupled dimer chains realized using chlorine vacancies in the c$(2\times2)$ adsorption layer on Cu(100). This system allows wide tuneability of the domain wall modes that we experimentally demonstrate using low-temperature scanning tunneling microscopy (STM). In the future, these modes may be used to realize well-defined fractional charge states or find applications in exotic quantum devices with atomically well-defined geometries. △ Less

Submitted 26 October, 2019; v1 submitted 22 June, 2018; originally announced June 2018.

Journal ref: npj Quantum Materials 5, 17 (2020)

Mobility and Clustering of Barium Ions and Dications in High Pressure Xenon Gas

Authors: E. Bainglass, B. J. P. Jones, F. W. Foss Jr, M. N. Huda, D. R. Nygren

Abstract: The clustering and drift properties of barium ions in xenon gas are explored theoretically, using density functional theory and computational ion mobility theory, with the goal of better understanding barium ion transport for neutrinoless double beta decay. We derive the equilibrium conformations, energies and entropies of molecular ions in the Ba$^{+}$-Xe and Ba$^{++}$-Xe systems, which yield a p… ▽ More The clustering and drift properties of barium ions in xenon gas are explored theoretically, using density functional theory and computational ion mobility theory, with the goal of better understanding barium ion transport for neutrinoless double beta decay. We derive the equilibrium conformations, energies and entropies of molecular ions in the Ba$^{+}$-Xe and Ba$^{++}$-Xe systems, which yield a predictive model of cluster formation in high pressure gas. We calculate ion-neutral interaction potential curves for these species and use them to predict effective molecular ion mobilities. Our calculation consistently reproduces experimental data on effective mobility and molecular ion formation for the Ba$^+$ system, and predicts strong cluster formation in the Ba$^{++}$ system, dominated by stable [BaXe$_6$]$^{++}$,[BaXe$_7$]$^{++}$, [BaXe$_8$]$^{++}$ and [BaXe$_9$]$^{++}$ complexes in the range of interest. Some implications for barium tagging in gas-phase neutrinoless double beta decay experiments are discussed, and the first predictions of pressure-dependent mobility of the doubly charged Ba$^{++}$ species are presented. △ Less

Submitted 10 August, 2018; v1 submitted 30 March, 2018; originally announced April 2018.

Comments: v2: Update to published version

Journal ref: Phys. Rev. A 97, 062509 (2018)

GraATP: A Graph Theoretic Approach for Automated Theorem Proving in Plane Geometry

Authors: Mohammad Murtaza Mahmud, Swakkhar Shatabda, Mohammad Nurul Huda

Abstract: Automated Theorem Proving (ATP) is an established branch of Artificial Intelligence. The purpose of ATP is to design a system which can automatically figure out an algorithm either to prove or disprove a mathematical claim, on the basis of a set of given premises, using a set of fundamental postulates and following the method of logical inference. In this paper, we propose GraATP, a generalized fr… ▽ More Automated Theorem Proving (ATP) is an established branch of Artificial Intelligence. The purpose of ATP is to design a system which can automatically figure out an algorithm either to prove or disprove a mathematical claim, on the basis of a set of given premises, using a set of fundamental postulates and following the method of logical inference. In this paper, we propose GraATP, a generalized framework for automated theorem proving in plane geometry. Our proposed method translates the geometric entities into nodes of a graph and the relations between them as edges of that graph. The automated system searches for different ways to reach the conclusion for a claim via graph traversal by which the validity of the geometric theorem is examined. △ Less

Submitted 18 December, 2014; originally announced December 2014.

Comments: The 8th International Conference on Software, Knowledge, Information Management and Applications (SKIMA 2014)

Local Feature or Mel Frequency Cepstral Coefficients - Which One is Better for MLN-Based Bangla Speech Recognition?

Authors: Foyzul Hassan, Mohammed Rokibul Alam Kotwal, Md. Mostafizur Rahman, Mohammad Nasiruddin, Md. Abdul Latif, Mohammad Nurul Huda

Abstract: This paper discusses the dominancy of local features (LFs), as input to the multilayer neural network (MLN), extracted from a Bangla input speech over mel frequency cepstral coefficients (MFCCs). Here, LF-based method comprises three stages: (i) LF extraction from input speech, (ii) phoneme probabilities extraction using MLN from LF and (iii) the hidden Markov model (HMM) based classifier to obtai… ▽ More This paper discusses the dominancy of local features (LFs), as input to the multilayer neural network (MLN), extracted from a Bangla input speech over mel frequency cepstral coefficients (MFCCs). Here, LF-based method comprises three stages: (i) LF extraction from input speech, (ii) phoneme probabilities extraction using MLN from LF and (iii) the hidden Markov model (HMM) based classifier to obtain more accurate phoneme strings. In the experiments on Bangla speech corpus prepared by us, it is observed that the LFbased automatic speech recognition (ASR) system provides higher phoneme correct rate than the MFCC-based system. Moreover, the proposed system requires fewer mixture components in the HMMs. △ Less

Submitted 4 October, 2013; originally announced October 2013.

Comments: 9 pages Advances in Computing and Communications (ACC) 2011

MSC Class: 68T50 ACM Class: I.2.7

Joint Demap** and Decoding for DQPSK Optical Coherent Receivers

Authors: Mario A. Castrillon, Damian A. Morero, Mario R. Hueda

Abstract: We present a low-complexity joint demapper-decoder scheme for coherent optical receivers with DQPSK modulation. The new technique reduces to 0.7dB the gap between QPSK and DQPSK in 100Gb/s coherent optical systems. We present a low-complexity joint demapper-decoder scheme for coherent optical receivers with DQPSK modulation. The new technique reduces to 0.7dB the gap between QPSK and DQPSK in 100Gb/s coherent optical systems. △ Less

Submitted 21 June, 2012; originally announced June 2012.

High-Rate Short-Block LDPC Codes for Iterative Decoding with Applications to High-Density Magnetic Recording Channels

Authors: Damian A. Morero, Graciela Corral-Briones, Carmen Rodriguez, Mario R. Hueda

Abstract: This paper investigates the Triangle Single Parity Check (T/SPC) code, a novel class of high-rate low-complexity LDPC codes. T/SPC is a regular, soft decodable, linear-time encodable/decodable code. Compared to previous high-rate and low-complexity LDPC codes, such as the well-known Turbo Product Code / Single Parity Check (TPC/SPC), T/SPC provides higher code rates, shorter code words, and lower… ▽ More This paper investigates the Triangle Single Parity Check (T/SPC) code, a novel class of high-rate low-complexity LDPC codes. T/SPC is a regular, soft decodable, linear-time encodable/decodable code. Compared to previous high-rate and low-complexity LDPC codes, such as the well-known Turbo Product Code / Single Parity Check (TPC/SPC), T/SPC provides higher code rates, shorter code words, and lower complexity. This makes T/SPC very attractive for practical implementation on integrated circuits. In addition, we analyze the performance of iterative decoders based on a soft-input soft-output (SISO) equalizer using T/SPC over high-density perpendicular magnetic recording channels. Computer simulations show that the proposed scheme is able to achieve a gain of up to 0.3 dB over TPC/SPC codes with a significant reduction of implementation complexity. △ Less

Submitted 7 April, 2011; originally announced April 2011.

Comments: 4 pages, 4 figures

A density functional study of molecular oxygen adsorption and reaction barrier on Pu (100) surface

Authors: M. N. Huda, A. K. Ray

Abstract: Oxygen molecule adsorptions on a Pu (100) surface have been studied in detail, using the generalized gradient approximation to density functional theory. Dissociative adsorption with a layer by layer alternate spin arrangement of the plutonium layer is found to be energetically more favorable compared to molecular adsorption. Hor2 approach on a bridge site without spin polarization was found to… ▽ More Oxygen molecule adsorptions on a Pu (100) surface have been studied in detail, using the generalized gradient approximation to density functional theory. Dissociative adsorption with a layer by layer alternate spin arrangement of the plutonium layer is found to be energetically more favorable compared to molecular adsorption. Hor2 approach on a bridge site without spin polarization was found to the highest chemisorbed site with energy of 8.787 eV among all the cases studied. The second highest chemisorption energy of 8.236 eV, is the spin-polarized Hor2 or Ver approach at center site. Inclusion of spin polarization affects the chemisorption processes significantly, non-spin-polarized chemisorption energies being typically higher than the spin-polarized energies. We also find that the 5f electrons to be more localized in spin-polarized cases compared to the non-spin-polarized counterparts. The ionic part of O-Pu bonding plays a significant role, while the Pu 5f-O 2p hybridization was found to be rather week. Also, adsorptions of oxygen push the top of 5f band deeper away from the Fermi level, indicating further bonding by the 5f orbitals might be less probable. Except for the interstitial sites, the work functions increase due to adsorptions of oxygen. △ Less

Submitted 28 August, 2004; originally announced August 2004.

A Density Functional Study of O2 Adsorption on (100) Surface of gamma-Uranium

Authors: M. N. Huda, A. K. Ray

Abstract: We have studied the chemisorption processes of O2 on the (100) surface of uranium using generalized gradient approximation to density functional theory. Dissociative adsorptions of O2 are significantly favored compared to molecular adsorptions. We found interstitial adsorption of molecular oxygen to be less probable, as no bound states were found in this case. Upon oxygen adsorption, O 2p orbita… ▽ More We have studied the chemisorption processes of O2 on the (100) surface of uranium using generalized gradient approximation to density functional theory. Dissociative adsorptions of O2 are significantly favored compared to molecular adsorptions. We found interstitial adsorption of molecular oxygen to be less probable, as no bound states were found in this case. Upon oxygen adsorption, O 2p orbitals is found to hybridize with U 5f bands, and part of the U 5f electrons become more localized. Also there is a significant charge transfer from the first layer of the uranium surface to the oxygen atoms, which made the bonding partly ionic. For the most favored site the dissociative chemisorption energy is approximately 9.5 eV, which indicates a strong reaction of uranium surface with oxygen. Spin polarization does not have a considerable effect on the chemisorption process. For most of the sites and approaches, chemisorption configurations are almost same at both spin-polarized and non-spin-polarized cases. For the most favored chemisorption sites of oxygen on uranium, paramagnetic adsorption is slightly stronger, by 0.304 eV, than the magnetic adsorption. △ Less

Submitted 29 April, 2004; originally announced April 2004.

A Density Functional Study of Atomic Hydrogen Adsorption on Plutonium Layers

Authors: M. N. Huda, A. K. Ray

Abstract: Hydrogen adsorption on delta-Pu (100) and (111) surfaces using the generalized gradient approximation of the density functional theory with Perdew and Wang functionals have been studied at both the spin-polarized level and the non-spin-polarized level. For the (100) surface at the non-spin-polarized level, we find that the center position of the (100) surface is the most favorable site with a ch… ▽ More Hydrogen adsorption on delta-Pu (100) and (111) surfaces using the generalized gradient approximation of the density functional theory with Perdew and Wang functionals have been studied at both the spin-polarized level and the non-spin-polarized level. For the (100) surface at the non-spin-polarized level, we find that the center position of the (100) surface is the most favorable site with a chemisorption energy of 2.762 eV and an optimum distance of the hydrogen adatom to the Pu surface of 1.07 A. For the spin-polarized (100) surface, the center site is again the preferred site with a chemisorption energy of 3.467 eV and an optimum hydrogen distance of 1.13 A. For the non-spin-polarized (111) surface, the center position is also the preferred site, but with slightly lower chemisorption energy, namely 2.756 eV and a higher hydrogen distance, 1.40 A, compared to the (100) center site. The center site is also the preferred site for the spin-polarized (111) surface, with a chemisorption energy of 3.450 eV and a hydrogen distance of 1.42 A. Also, for the spin-polarized calculations, the over all net magnetic moments of the (111) surface changed significantly due to the hydrogen adsorption. The 5f orbitals are delocalized, especially as one approaches the Fermi level. However, the degree of localization decreases for spin-polarized calculations. The coordination numbers have a significant role in the chemical bonding process. Mulliken charge distribution analysis indicates that the interaction of Pu with H mainly takes place in the first layer and that the other two layers are only slightly affected. Work functions, in general, tend to increase due to the presence of a hydrogen adatom. △ Less

Submitted 11 June, 2004; v1 submitted 13 January, 2004; originally announced January 2004.

Comments: The introduction is extended to include a short review of delta-Pu

Electronic Structures and Bonding of Oxygen on Plutonium Layers

Authors: M. N. Huda, A. K. Ray

Abstract: Oxygen adsorption on delta-Pu (100) and (111) surfaces have been studied at both non-spin-polarized and spin-polarized levels using the generalized gradient approximation of density functional theory (GGA-DFT)with Perdew and Wang functionals. The center position of the (100) surface is found to be the most favorable site with chemisorption energies of 7.386 eV and 7.080 eV at the two levels of t… ▽ More Oxygen adsorption on delta-Pu (100) and (111) surfaces have been studied at both non-spin-polarized and spin-polarized levels using the generalized gradient approximation of density functional theory (GGA-DFT)with Perdew and Wang functionals. The center position of the (100) surface is found to be the most favorable site with chemisorption energies of 7.386 eV and 7.080 eV at the two levels of theory. The distances of the oxygen adatom from the Pu surface are found to be 0.92A and 1.02A, respectively. For the (111) surface non-spin-polarized calculations, the center position is also the preferred site with a chemisorption energy of 7.070 eV and the distance of the adatom being 1.31A, but for spin-polarized calculations the bridge and the center sites are found to be basically degenerate, the difference in chemisorption energies being only 0.021 eV. In general, due to the adsorption of oxygen, plutonium 5f orbitals are pushed further below the Fermi energy, compared to the bare plutonium layers. The work function, in general, increases due to oxygen adsorption on plutonium surfaces. △ Less

Submitted 28 April, 2004; v1 submitted 4 November, 2003; originally announced November 2003.

Comments: Spin-polarization is considered, and the paper is revised accordingly

Carbon Dimer in Silicon Cage: A Class of Highly Stable Silicon Carbide Clusters

Authors: M. N. Huda, A. K. Ray

Abstract: A class of silicon carbide cage clusters with two carbon atoms inside the silicon cage and with high stabilities are presented. The theoretical formalism used is Hartree-Fock theory followed by second order many body perturbation theory to account for correlation effects and geometry optimizations at the second order perturbation theory level are performed without any symmetry constraints. The s… ▽ More A class of silicon carbide cage clusters with two carbon atoms inside the silicon cage and with high stabilities are presented. The theoretical formalism used is Hartree-Fock theory followed by second order many body perturbation theory to account for correlation effects and geometry optimizations at the second order perturbation theory level are performed without any symmetry constraints. The smallest "cage" is found to be a silicon cube with the carbon dimer inside the cube. Based on the simultaneous criteria of high binding energy, high vertical ionization potential, high homo-lumo gap, and low electron affinity, Si_14C_2 with a close fullerene like structure, is predicted to be a particularly stable cluster both al all-electron and at pseudopotential level of calculations. The C-C bond lengths and the HOMO-LUMO gaps of the clusters are both found to oscillate with the cluster size. △ Less

Submitted 6 September, 2003; originally announced September 2003.

Novel Silicon-Carbon Fullerene-Like Cages: A Class of sp^3-sp^2 Covalent-Ionic Hybridized Nanosystems

Authors: M. N. Huda, A. K. Ray

Abstract: A class of highly symmetric silicon carbide fullerene-like cage nanoclusters with carbon atoms inside the Si_20 cage and with high stability are presented. The Generalized Gradient Approximation of Density Functional Theory (GGA-DFT) is used to study the electronic and geometric structure properties of these structures and full geometry optimizations are performed with an all electron 6-311G** b… ▽ More A class of highly symmetric silicon carbide fullerene-like cage nanoclusters with carbon atoms inside the Si_20 cage and with high stability are presented. The Generalized Gradient Approximation of Density Functional Theory (GGA-DFT) is used to study the electronic and geometric structure properties of these structures and full geometry optimizations are performed with an all electron 6-311G** basis set. The stability of the clusters is found to depend on the geometrical arrangements of the carbon atoms inside the clusters and the partly ionic nature of the bonding. Possibilities of extending these structures into a larger class of nanostructures are discussed. △ Less

Submitted 18 September, 2003; originally announced September 2003.