-
Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers
Authors:
Boris Perminov,
Kirill Grebnev,
Uwe Huebner,
Maria Chernysheva
Abstract:
Side-pum** fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due t…
▽ More
Side-pum** fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due to significant differences in the thermal properties of pump-delivering silica fibres and signal-guiding fluoride-based fibres. To address these challenges, this work introduces a design for a fuse-less side-polished (D-shaped) fibre-based pump combiner comprising multimode silica and double-clad fluoride-based fibres. The results demonstrate stable coupling efficiency exceeding 80% at a 980-nm wavelength over 8 hours of continuous operation under active thermal control. The developed pump combiner has also been successfully integrated into a linear Er-doped fibre laser cavity, showing continuous-wave generation at 2731 or 2781-nm central wavelength with an output power of 0.87 W. Overall, this innovative approach presents a simple, repeatable, and reproducible pump combiner design that opens up new possibilities for leveraging fibre-based component technology in soft glass matrices and other emerging fibres with unique compositions.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Grayscale Electron Beam Lithography Direct Patterned Antimony Sulfide
Authors:
Wei Wang,
Uwe Hübner,
Tao Chen,
Anne Gärtner,
Joseph Köbel,
Franka Jahn,
Henrik Schneidwind,
Andrea Dellith,
Jan Dellith,
Torsten Wieduwilt,
Matthias Zeisberger,
Tanveer Ahmed Shaik,
Astrid Bingel,
Markus A Schmidt,
Jer-Shing Huang,
Volker Deckert
Abstract:
The rise of micro/nanooptics and lab-on-chip devices demands the fabrication of three-dimensional structures with decent resolution. Here, we demonstrate the combination of grayscale electron beam lithography and direct forming methodology to fabricate antimony sulfide structures with free form for the first time. The refractive index of the electron beam patterned structure was calculated based o…
▽ More
The rise of micro/nanooptics and lab-on-chip devices demands the fabrication of three-dimensional structures with decent resolution. Here, we demonstrate the combination of grayscale electron beam lithography and direct forming methodology to fabricate antimony sulfide structures with free form for the first time. The refractive index of the electron beam patterned structure was calculated based on an optimization algorithm that is combined with genetic algorithm and transfer matrix method. By adopting electron irradiation with variable doses, 4-level Fresnel Zone Plates and metalens were produced and characterized. This method can be used for the fabrication of three-dimensional diffractive optical elements and metasurfaces in a single step manner.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Gas transport mechanisms through molecularly thin membranes
Authors:
Vladislav Stroganov,
Daniel Hüger,
Christof Neumann,
Tabata Noethel,
Michael Steinert,
Uwe Huebner,
Andrey Turchanin
Abstract:
Atomically thin molecular carbon nanomembranes (CNMs) with intrinsic sub-nanometer porosity are considered as promising candidates for next generation filtration and gas separation applications due to their extremely low thickness, energy efficiency and selectivity. CNMs are intrinsically porous which is advantageous over other 2D materials such as graphene and transition metal dichalcogenides whe…
▽ More
Atomically thin molecular carbon nanomembranes (CNMs) with intrinsic sub-nanometer porosity are considered as promising candidates for next generation filtration and gas separation applications due to their extremely low thickness, energy efficiency and selectivity. CNMs are intrinsically porous which is advantageous over other 2D materials such as graphene and transition metal dichalcogenides where defects and pores need to be introduced after synthesis. It was already discovered that water and helium permeate through 4,4-terphenylthiol (TPT) CNM above the limit of detection. Additionally, the permeation of water vapour was nonlinear against its pressure and 1000 stronger than permeation of helium despite their similar kinetic diameters. However, there was no clear permeation mechanism which could explain permeation of both species. Here, we demonstrate that permeation of all gas species is defined by their adsorption. We performed gas permeation measurements through TPT CNM at different temperatures and found that all measured gases experienced an activation energy barrier which correlated with their kinetic diameters. Furthermore, we identified that entropy loss during adsorption and permeation is the fundamental reason of strong nonlinear permeation of water. Our results also demonstrated that adsorption plays a major role in permeation of all gases, not just water.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering
Authors:
Lennart Gaus,
Lothar Bischoff,
Michael Bussmann,
Eric Cunningham,
Chandra B. Curry,
Eric Galtier,
Maxence Gauthier,
Alejandro Laso García,
Marco Garten,
Siegfried Glenzer,
Jörg Grenzer,
Christian Gutt,
Nicholas J. Hartley,
Lingen Huang,
Uwe Hübner,
Dominik Kraus,
Hae Ja Lee,
Emma E. McBride,
Josefine Metzkes-Ng,
Bob Nagler,
Motoaki Nakatsutsumi,
Jan Nikl,
Masato Ota,
Alexander Pelka,
Irene Prencipe
, et al. (11 additional authors not shown)
Abstract:
Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray…
▽ More
Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Giant persistent photoconductivity in monolayer MoS2 field-effect transistors
Authors:
A. George,
M. V. Fistul,
M. Gruenewald,
D. Kaiser,
T. Lehnert,
R. Mupparapu,
C. Neumann,
U. Hübner,
M. Schaal,
N. Masurkar,
A. L. M. Reddy,
I. Staude,
U. Kaiser,
T. Fritz,
A. Turchanin
Abstract:
Monolayer transition metal dichalcogenides (TMD) have numerous potential applications in ultrathin electronics and photonics. The exposure of TMD based devices to light generates photo-carriers resulting in an enhanced conductivity, which can be effectively used, e.g., in photodetectors. If the photo-enhanced conductivity persists after removal of the irradiation, the effect is known as persistent…
▽ More
Monolayer transition metal dichalcogenides (TMD) have numerous potential applications in ultrathin electronics and photonics. The exposure of TMD based devices to light generates photo-carriers resulting in an enhanced conductivity, which can be effectively used, e.g., in photodetectors. If the photo-enhanced conductivity persists after removal of the irradiation, the effect is known as persistent photoconductivity (PPC). Here we show that ultraviolet light (wavelength = 365 nm) exposure induces an extremely long-living giant PPC (GPPC) in monolayer MoS2 (ML-MoS2) field-effect transistors (FET) with a time constant of ~30 days. Furthermore, this effect leads to a large enhancement of the conductivity up to a factor of 107. In contrast to previous studies in which the origin of the PPC was attributed to extrinsic reasons such as trapped charges in the substrate or adsorbates, we unambiguously show that the GPPC arises mainly from the intrinsic properties of ML-MoS2 such as lattice defects that induce a large amount of localized states in the forbidden gap. This finding is supported by a detailed experimental and theoretical study of the electric transport in TMD based FETs as well as by characterization of ML-MoS2 with scanning tunneling spectroscopy, high-resolution transmission electron microscopy, and photoluminescence measurements. The obtained results provide a basis towards the defect-based engineering of the electronic and optical properties of TMDs for device applications.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Metastable atomic layer deposition: 3D self-assembly towards ultra dark materials
Authors:
Mario Ziegler,
Andre Dathe,
Kilian Pollok,
Falko Langenhorst,
Uwe Huebner,
Dong Wang,
Peter Schaaf
Abstract:
Black body materials prove promising candidates to meet future energy demands as they are able to harvest energy from the total bandwidth of solar radiation. Here, we report on high absorption (> 98 %) near-black body-like structures consisting of a silica scaffold and Ag nanoparticles with a layer thickness below 10 um; fabricated using metastable atomic layer deposition (MS-ALD) and to be applie…
▽ More
Black body materials prove promising candidates to meet future energy demands as they are able to harvest energy from the total bandwidth of solar radiation. Here, we report on high absorption (> 98 %) near-black body-like structures consisting of a silica scaffold and Ag nanoparticles with a layer thickness below 10 um; fabricated using metastable atomic layer deposition (MS-ALD) and to be applied for a wide solar spectrum ranging from 220 nm to 2500 nm. Several effects contribute collectively and in a synergistic manner to the high absorbance, including the pronounced heterogeneity of the nanoparticles in size and shape, particle plasmon hybridization and the trap** of omni-directionally scattered light in the 3D hierarchical hybrid structures. We propose that, in the future, MS-ALD needs to be considered as a simple and promising method to fabricate black-body materials with excellent broadband absorption.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Use of Emergency Departments by Frail Elderly Patients: Temporal Patterns and Case Complexity
Authors:
Jens Rauch,
Mathias Denter,
Ursula Hübner
Abstract:
Emergency department (ED) care for frail elderly patients is associated with an increased use of resources due to their complex medical needs and frequently difficult psycho-social situation. To better target their needs with specially trained staff, it is vital to determine the times during which these particular patients present to the ED. Recent research was inconclusive regarding this question…
▽ More
Emergency department (ED) care for frail elderly patients is associated with an increased use of resources due to their complex medical needs and frequently difficult psycho-social situation. To better target their needs with specially trained staff, it is vital to determine the times during which these particular patients present to the ED. Recent research was inconclusive regarding this question and the applied methods were limited to coarse time windows. Moreover, there is little research on time variation of frail ED patients' case complexity. This study examines differences in arrival rates for frail vs. non-frail patients in detail and compares case complexity in frail patients within vs. outside of regular GP working hours. Arrival times and case variables (admission rate, ED length of stay [LOS], triage level and comorbidities) were extracted from the EHR of an ED in an urban German teaching hospital. We employed Poisson time series regression to determine patterns in hourly arrival rates over the week. Frail elderly patients presented more likely to the ED during already high frequented hours, especially at midday and in the afternoon. Case complexity for frail patients was significantly higher compared to non-frail patients, but varied marginally in time only with respect to triage level and ED LOS. The results suggest that frailty-attuned emergency care should be available in EDs during the busiest hours. Based on EHR data, hospitals thus can tailor their staff needs.
△ Less
Submitted 13 June, 2019;
originally announced June 2019.
-
Controlling the energy gap of a tunable two-level system by ac drive
Authors:
G. Oelsner,
U. Hübner,
E. Il'ichev
Abstract:
We study the influence of a strong off-resonant driving signal to the energy levels of a superconducting flux qubit both experimentally and theoretically. In the experiment, we carry out a three-tone spectroscopy. This allows us to directly observe the modification of the qubit's energy levels by the dynamical Stark shift caused by the driving signal. A theoretical treatment including corrections…
▽ More
We study the influence of a strong off-resonant driving signal to the energy levels of a superconducting flux qubit both experimentally and theoretically. In the experiment, we carry out a three-tone spectroscopy. This allows us to directly observe the modification of the qubit's energy levels by the dynamical Stark shift caused by the driving signal. A theoretical treatment including corrections from both, rotating and counter-rotating frame, allowed us to completely explain the observed experimental results and to reconstruct the influence of the strong driving to the dissipative dynamics as well as to the coupling constants of the qubit. As one potential application, the tunability of the minimal energy-level splitting of a superconducting qubit by a microwave induced dynamical Stark shift can help to overcome the parameter spread induced by the micro fabrication of superconducting artificial quantum circuits.
△ Less
Submitted 11 February, 2020; v1 submitted 30 November, 2018;
originally announced November 2018.
-
Better than a lens -- Increasing the signal-to-noise ratio through pupil splitting
Authors:
Jan Becker,
Takahiro Deguchi,
Alexander Jügler,
Ronny Förster,
Uwe Hübner,
Jonas Ries,
Rainer Heintzmann
Abstract:
Lenses are designed to fulfill Fermats principle such that all light interferes constructively in its focus, guaranteeing its maximum concentration. It can be shown that imaging via an unmodified full pupil yields the maximum transfer strength for all spatial frequencies transferable by the system. Seemingly also the signal-to-noise ratio (SNR) is optimal. The achievable SNR at a given photon budg…
▽ More
Lenses are designed to fulfill Fermats principle such that all light interferes constructively in its focus, guaranteeing its maximum concentration. It can be shown that imaging via an unmodified full pupil yields the maximum transfer strength for all spatial frequencies transferable by the system. Seemingly also the signal-to-noise ratio (SNR) is optimal. The achievable SNR at a given photon budget is critical especially if that budget is strictly limited as in the case of fluorescence microscopy. In this work we propose a general method which achieves a better SNR for high spatial frequency information of an optical imaging system, without the need to capture more photons. This is achieved by splitting the pupil of an incoherent imaging system such that two (or more) sub-images are simultaneously acquired and computationally recombined. We compare the theoretical performance of split pupil imaging to the non-split scenario and implement the splitting using a tilted elliptical mirror placed at the back-focal-plane (BFP) of a fluorescence widefield microscope.
△ Less
Submitted 5 September, 2022; v1 submitted 20 November, 2018;
originally announced November 2018.
-
Thin film superconducting quantum interferometer with ultralow inductance
Authors:
S. I. Bondarenko,
A. V. Krevsun,
E. V. Ilichev,
U. Hubner,
V. P. Koverya,
S. I. Link
Abstract:
A simple method has been developed for manufacturing a thin film superconducting quantum interferometer (SQI) with ultralow inductance (~10^-13 H). Current-voltage and voltage-field characteristics of the SQI are presented. The basic design equations are obtained and confirmed experimentally. The SQI has been used for the first time to determine the penetration depth of a magnetic field into a fil…
▽ More
A simple method has been developed for manufacturing a thin film superconducting quantum interferometer (SQI) with ultralow inductance (~10^-13 H). Current-voltage and voltage-field characteristics of the SQI are presented. The basic design equations are obtained and confirmed experimentally. The SQI has been used for the first time to determine the penetration depth of a magnetic field into a film of 50% In-50% Sn alloy.
△ Less
Submitted 6 September, 2018;
originally announced September 2018.
-
Understanding the Characteristics of Frequent Users of Emergency Departments: What Role Do Medical Conditions Play?
Authors:
Jens Rauch,
Jens Hüsers,
Birgit Babitsch,
Ursula Hübner
Abstract:
Frequent users of emergency departments (ED) pose a significant challenge to hospital emergency services. Despite a wealth of studies in this field, it is hardly understood, what medical conditions lead to frequent attendance. We examine (1) what ambulatory care sensitive conditions (ACSC) are linked to frequent use, (2) how frequent users can be clustered into subgroups with respect to their diag…
▽ More
Frequent users of emergency departments (ED) pose a significant challenge to hospital emergency services. Despite a wealth of studies in this field, it is hardly understood, what medical conditions lead to frequent attendance. We examine (1) what ambulatory care sensitive conditions (ACSC) are linked to frequent use, (2) how frequent users can be clustered into subgroups with respect to their diagnoses, acuity and admittance, and (3) whether frequent use is related to higher acuity or admission rate. We identified several ACSC that highly increase the risk for heavy ED use, extracted four major diagnose subgroups and found no significant effect neither for acuity nor admission rate. Our study indicates that especially patients in need of (nursing) care form subgroups of frequent users, which implies that quality of care services might be crucial for tackling frequent use. Hospitals are advised to regularly analyze their ED data in the EHR to better align resources.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.
-
Lateral heterostructures of two-dimensional materials by electron-beam induced stitching
Authors:
Andreas Winter,
Antony George,
Christof Neumann,
Zian Tang,
Michael J. Mohn,
Johannes Biskupek,
Nirul Masurkar,
Leela Mohana Reddy Arava,
Thomas Weimann,
Uwe Hübner,
Ute Kaiser,
Andrey Turchanin
Abstract:
We present a novel methodology to synthesize two-dimensional (2D) lateral heterostructures of graphene and MoS2 sheets with molecular carbon nanomembranes (CNMs), which is based on electron beam induced stitching. Monolayers of graphene and MoS2 were grown by chemical vapor deposition (CVD) on copper and SiO2 substrates, respectively, transferred onto gold/mica substrates and patterned by electron…
▽ More
We present a novel methodology to synthesize two-dimensional (2D) lateral heterostructures of graphene and MoS2 sheets with molecular carbon nanomembranes (CNMs), which is based on electron beam induced stitching. Monolayers of graphene and MoS2 were grown by chemical vapor deposition (CVD) on copper and SiO2 substrates, respectively, transferred onto gold/mica substrates and patterned by electron beam lithography or photolithography. Self-assembled monolayers (SAMs) of aromatic thiols were grown on the gold film in the areas where the 2D materials were not present. An irradiation with a low energy electron beam was employed to convert the SAMs into CNMs and simultaneously stitching the CNM edges to the edges of graphene and MoS2, therewith forming a heterogeneous but continuous film composed of two different materials. The formed lateral heterostructures possess a high mechanical stability, enabling their transfer from the gold substrate onto target substrates and even the preparation as freestanding sheets. We characterized the individual steps of this synthesis and the structure of the final heterostructures by complementary analytical techniques including optical microscopy, Raman spectroscopy, atomic force microscopy (AFM), helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) and find that they possess nearly atomically sharp boundaries.
△ Less
Submitted 1 May, 2018;
originally announced May 2018.
-
Observation of ultrafast solid-density plasma dynamics using femtosecond X-ray pulses from a free-electron laser
Authors:
Thomas Kluge,
Melanie Rödel,
Josefine Metzkes,
Alexander Pelka,
Alejandro Laso Garcia,
Irene Prencipe,
Martin Rehwald,
Motoaki Nakatsutsumi,
Emma E. McBride,
Tommy Schönherr,
Marco Garten,
Nicholas J. Hartley,
Malte Zacharias,
Arthur Erbe,
Yordan M. Georgiev,
Eric Galtier,
Inhyuk Nam,
Hae Ja Lee,
Siegfried Glenzer,
Michael Bussmann,
Christian Gutt,
Karl Zeil,
Christian Rödel,
Uwe Hübner,
Ulrich Schramm
, et al. (1 additional authors not shown)
Abstract:
The complex physics of the interaction between short pulse high intensity lasers and solids is so far hardly accessible by experiments. As a result of missing experimental capabilities to probe the complex electron dynamics and competing instabilities, this impedes the development of compact laser-based next generation secondary radiation sources, e.g. for tumor therapy [Bulanov2002,ledingham2007]…
▽ More
The complex physics of the interaction between short pulse high intensity lasers and solids is so far hardly accessible by experiments. As a result of missing experimental capabilities to probe the complex electron dynamics and competing instabilities, this impedes the development of compact laser-based next generation secondary radiation sources, e.g. for tumor therapy [Bulanov2002,ledingham2007], laboratory-astrophysics [Remington1999,Bulanov2015], and fusion [Tabak2014]. At present, the fundamental plasma dynamics that occur at the nanometer and femtosecond scales during the laser-solid interaction can only be elucidated by simulations. Here we show experimentally that small angle X-ray scattering of femtosecond X-ray free-electron laser pulses facilitates new capabilities for direct in-situ characterization of intense short-pulse laser plasma interaction at solid density that allows simultaneous nanometer spatial and femtosecond temporal resolution, directly verifying numerical simulations of the electron density dynamics during the short pulse high intensity laser irradiation of a solid density target. For laser-driven grating targets, we measure the solid density plasma expansion and observe the generation of a transient grating structure in front of the pre-inscribed grating, due to plasma expansion, which is an hitherto unknown effect. We expect that our results will pave the way for novel time-resolved studies, guiding the development of future laser-driven particle and photon sources from solid targets.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
Evaluating arbitrary strain configurations and do** in graphene with Raman spectroscopy
Authors:
Niclas S. Mueller,
Sebastian Heeg,
Miriam Peña Alvarez,
Patryk Kusch,
Sören Wasserroth,
Nick Clark,
Fred Schedin,
John Parthenios,
Konstantinos Papagelis,
Costas Galiotis,
Martin Kalbáč,
Aravind Vijayaraghavan,
Uwe Huebner,
Roman Gorbachev,
Otakar Frank,
Stephanie Reich
Abstract:
Raman spectroscopy is a powerful tool for characterizing the local properties of graphene. Here, we introduce a method for evaluating unknown strain configurations and simultaneous do**. It relies on separating the effects of hydrostatic strain (peak shift) and shear strain (peak splitting) on the Raman spectrum of graphene. The peak shifts from hydrostatic strain and do** are separated with a…
▽ More
Raman spectroscopy is a powerful tool for characterizing the local properties of graphene. Here, we introduce a method for evaluating unknown strain configurations and simultaneous do**. It relies on separating the effects of hydrostatic strain (peak shift) and shear strain (peak splitting) on the Raman spectrum of graphene. The peak shifts from hydrostatic strain and do** are separated with a correlation analysis of the 2D and G frequencies. This enables us to obtain the local hydrostatic strain, shear strain and do** without any assumption on the strain configuration prior to the analysis. We demonstrate our approach for two model cases: Graphene under uniaxial stress on a PMMA substrate and graphene suspended on nanostructures that induce an unknown strain configuration. We measured $ω_\mathrm{2D}/ω_\mathrm{G} = 2.21 \pm 0.05$ for pure hydrostatic strain. Raman scattering with circular corotating polarization is ideal for analyzing strain and do**, especially for weak strain when the peak splitting by shear strain cannot be resolved.
△ Less
Submitted 7 April, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Detection of weak microwave fields with an underdamped Josephson junction
Authors:
G. Oelsner,
C. K. Andersen,
M. Rehák,
M. Schmelz,
S. Anders,
M. Grajcar,
U. Hübner,
K. Mølmer,
E. Il'ichev
Abstract:
We have constructed a microwave detector based on the voltage switching of an underdamped Josephson junction, that is positioned at a current antinode of a λ/4 coplanar waveguide resonator. By measuring the switching current and the transmission through a waveguide capacitively coupled to the resonator at different drive frequencies and temperatures we are able to fully characterize the system and…
▽ More
We have constructed a microwave detector based on the voltage switching of an underdamped Josephson junction, that is positioned at a current antinode of a λ/4 coplanar waveguide resonator. By measuring the switching current and the transmission through a waveguide capacitively coupled to the resonator at different drive frequencies and temperatures we are able to fully characterize the system and assess its detection efficiency and sensitivity. Testing the detector by applying a classical microwave field with the strength of a single photon yielded a sensitivity parameter of 0.5 in qualitative agreement with theoretical calculations.
△ Less
Submitted 23 May, 2016; v1 submitted 19 May, 2016;
originally announced May 2016.
-
Landau-Zener-Stückelberg-Majorana lasing in circuit QED
Authors:
P. Neilinger,
S. N. Shevchenko,
J. Bogár,
M. Rehák,
G. Oelsner,
D. S. Karpov,
U. Hübner,
O. Astafiev,
M. Grajcar,
E. Il'ichev
Abstract:
We demonstrate amplification (and attenuation) of a probe signal by a driven two-level quantum system in the Landau-Zener-Stückelberg-Majorana regime by means of an experiment, in which a superconducting qubit was strongly coupled to a microwave cavity, in a conventional arrangement of circuit quantum electrodynamics. Two different types of flux qubit, specifically a conventional Josephson junctio…
▽ More
We demonstrate amplification (and attenuation) of a probe signal by a driven two-level quantum system in the Landau-Zener-Stückelberg-Majorana regime by means of an experiment, in which a superconducting qubit was strongly coupled to a microwave cavity, in a conventional arrangement of circuit quantum electrodynamics. Two different types of flux qubit, specifically a conventional Josephson junctions qubit and a phase-slip qubit, show similar results, namely, lasing at the working points where amplification takes place. The experimental data are explained by the interaction of the probe signal with Rabi-like oscillations. The latter are created by constructive interference of Landau-Zener-Stückelberg-Majorana (LZSM) transitions during the driving period of the qubit. A detailed description of the occurrence of these oscillations and a comparison of obtained data with both analytic and numerical calculations are given.
△ Less
Submitted 23 September, 2016; v1 submitted 1 March, 2016;
originally announced March 2016.
-
Two-photon lasing by a superconducting qubit
Authors:
P. Neilinger,
M. Rehák,
M. Grajcar,
G. Oelsner,
U. Hübner,
E. Il'ichev
Abstract:
We study the response of a magnetic-field-driven superconducting qubit strongly coupled to a superconducting coplanar waveguide resonator. We observed a strong amplification/dam** of a probing signal at different resonance points corresponding to a one and two-photon emission/absorption. The sign of the detuning between the qubit frequency and the probe determines whether amplification or dampin…
▽ More
We study the response of a magnetic-field-driven superconducting qubit strongly coupled to a superconducting coplanar waveguide resonator. We observed a strong amplification/dam** of a probing signal at different resonance points corresponding to a one and two-photon emission/absorption. The sign of the detuning between the qubit frequency and the probe determines whether amplification or dam** is observed. The larger blue detuned driving leads to two-photon lasing while the larger red detuning cools the resonator. Our experimental results are in good agreement with the theoretical model of qubit lasing and cooling at the Rabi frequency.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
Broadband Sample Holder for Microwave Spectroscopy of Superconducting Qubits
Authors:
A. S. Averkin,
A. Karpov,
K. Shulga,
E. Glushkov,
N. Abramov,
U. Huebner,
E. Ilichev,
A. V. Ustinov
Abstract:
We present a practical design and implementation of a broadband sample holder suitable for microwave experiments with superconducting integrated circuits at millikelvin temperatures. Proposed design can be easily integrated in standard dilution cryostats, has flat pass band response in a frequency range from 0 to 32 GHz, allowing the RF testing of the samples with substrate size up to 4x4 mm. The…
▽ More
We present a practical design and implementation of a broadband sample holder suitable for microwave experiments with superconducting integrated circuits at millikelvin temperatures. Proposed design can be easily integrated in standard dilution cryostats, has flat pass band response in a frequency range from 0 to 32 GHz, allowing the RF testing of the samples with substrate size up to 4x4 mm. The parasitic higher modes interference in the holder structure is analyzed and prevented via design considerations. The developed setup can be used for characterization of superconducting parametric amplifiers, bolometers and qubits. We tested the designed sample holder by characterizing of a superconducting flux qubit at 20 mK temperature.
△ Less
Submitted 20 July, 2014;
originally announced July 2014.
-
Finite quasiparticle lifetime in disordered superconductors
Authors:
M. Žemlička,
P. Neilinger,
M. Trgala,
D. Manca,
M. Grajcar,
P. Szabo,
P. Samuely,
Š. Gaži,
U. Hübner,
V. M. Vinokur,
E. Il'ichev
Abstract:
We investigate the complex conductivity of a highly disordered MoC superconducting film with $k_Fl\approx 1$, where $k_F$ is the Fermi wavenumber and $l$ is the mean free path, derived from experimental transmission characteristics of coplanar waveguide resonators in a wide temperature range below the superconducting transition temperature $T_c$. We find that the original Mattis-Bardeen model with…
▽ More
We investigate the complex conductivity of a highly disordered MoC superconducting film with $k_Fl\approx 1$, where $k_F$ is the Fermi wavenumber and $l$ is the mean free path, derived from experimental transmission characteristics of coplanar waveguide resonators in a wide temperature range below the superconducting transition temperature $T_c$. We find that the original Mattis-Bardeen model with a finite quasiparticle lifetime, $τ$, offers a perfect description of the experimentally observed complex conductivity. We show that $τ$ is appreciably reduced by scattering effects. Characteristics of the scattering centers are independently found by the scanning tunneling spectroscopy and agree with those determined from the complex conductivity.
△ Less
Submitted 27 October, 2015; v1 submitted 9 July, 2014;
originally announced July 2014.
-
Parametric amplification by coupled flux qubits
Authors:
M. Rehak,
P. Neilinger,
M. Grajcar,
G. Oelsner,
U. Hubner,
E. Ilichev,
H. -G. Meyer
Abstract:
We report the parametric amplification of a microwave signal in a Kerr medium formed from superconducting qubits. Two mutually coupled flux qubits, embedded in the current antinode of a superconducting coplanar waveguide resonator, are used as a nonlinear element. Shared Josephson junctions provide the qubit-resonator coupling, resulting in a device with a measured gain of about 20 dB. We argue, t…
▽ More
We report the parametric amplification of a microwave signal in a Kerr medium formed from superconducting qubits. Two mutually coupled flux qubits, embedded in the current antinode of a superconducting coplanar waveguide resonator, are used as a nonlinear element. Shared Josephson junctions provide the qubit-resonator coupling, resulting in a device with a measured gain of about 20 dB. We argue, that this arrangement represents a unit cell which can be straightforwardly extended to a quasi one-dimensional quantum metamaterial with a large tunable Kerr nonlinearity.
△ Less
Submitted 27 December, 2013;
originally announced December 2013.
-
Implementation of a Quantum Metamaterial
Authors:
Pascal Macha,
Gregor Oelsner,
Jan-Michael Reiner,
Michael Marthaler,
Stephan André,
Gerd Schön,
Uwe Huebner,
Hans-Georg Meyer,
Evgeni Il'ichev,
Alexey V. Ustinov
Abstract:
Manipulating the propagation of electromagnetic waves through sub-wavelength sized artificial structures is the core function of metamaterials. Resonant structures, such as split ring resonators, play the role of artificial "atoms" and shape the magnetic response. Superconducting metamaterials moved into the spotlight for their very low ohmic losses and the possibility to tune their resonance freq…
▽ More
Manipulating the propagation of electromagnetic waves through sub-wavelength sized artificial structures is the core function of metamaterials. Resonant structures, such as split ring resonators, play the role of artificial "atoms" and shape the magnetic response. Superconducting metamaterials moved into the spotlight for their very low ohmic losses and the possibility to tune their resonance frequency by exploiting the Josephson inductance. Moreover, the nonlinear nature of the Josephson inductance enables the fabrication of truly artificial atoms. Arrays of such superconducting quantum two-level systems (qubits) can be used for the implementation of a quantum metamaterial. Here, we perform an experiment in which 20 superconducting flux qubits are embedded into a single microwave resonator. The phase of the signal transmitted through the resonator reveals the collective resonant coupling of up to 8 qubits. Quantum circuits of many artificial atoms based on this proof-of-principle experiment offer a wide range of prospects, from detecting single microwave photons to phase switching, quantum birefringence and superradiant phase transitions.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Amplification and attenuation of a probe signal by doubly-dressed states
Authors:
S. N. Shevchenko,
G. Oelsner,
Ya. S. Greenberg,
P. Macha,
D. S. Karpov,
M. Grajcar,
U. Hubner,
A. N. Omelyanchouk,
E. Il'ichev
Abstract:
We analyse a system composed of a qubit coupled to electromagnetic fields of two high quality quantum oscillators. Particular realization of such a system is the superconducting qubit coupled to a transmission-line resonator driven by two signals with frequencies close to the resonator's harmonics. One strong signal is used for exciting the system to a high energetic state while the second weak si…
▽ More
We analyse a system composed of a qubit coupled to electromagnetic fields of two high quality quantum oscillators. Particular realization of such a system is the superconducting qubit coupled to a transmission-line resonator driven by two signals with frequencies close to the resonator's harmonics. One strong signal is used for exciting the system to a high energetic state while the second weak signal is applied for probing effective eigenstates of the system. We demonstrate that a description of the system dynamics as doubly dressed qubit is applicable. Experiments show that in the case of high quality resonators the energy levels and the resonance conditions can be probed even for high driving amplitudes. The interaction of the qubit with photons of two harmonics has prospects to be used as a quantum amplifier or an attenuator.
△ Less
Submitted 8 May, 2014; v1 submitted 10 September, 2013;
originally announced September 2013.
-
Frequency Division Multiplexing Readout and Simultaneous Manipulation of an Array of Flux Qubits
Authors:
Markus Jerger,
Stefano Poletto,
Pascal Macha,
Uwe Hübner,
Evgeni Il'ichev,
Alexey V. Ustinov
Abstract:
An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout appara…
▽ More
An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout apparatus. Parallel readout of 6 flux qubits using a frequency division multiplexing technique is demonstrated, as well as simultaneous manipulation and time resolved measurement of 3 qubits. We discuss how this technique can be scaled up to read out hundreds of qubits on a chip.
△ Less
Submitted 12 July, 2012; v1 submitted 29 May, 2012;
originally announced May 2012.
-
Dressed-state amplification by a superconducting qubit
Authors:
G. Oelsner,
P. Macha,
O. V. Astafiev,
E. Il'ichev,
M. Grajcar,
U. Hübner,
B. I. Ivanov,
P. Neilinger,
H. -G. Meyer
Abstract:
We demonstrate amplification of a microwave signal by a strongly driven two-level system in a coplanar waveguide resonator. The effect known from optics as dressed-state lasing is observed with a single quantum system formed by a persistent current (flux) qubit. The transmission through the resonator is enhanced when the Rabi frequency of the driven qubit is tuned into resonance with one of the re…
▽ More
We demonstrate amplification of a microwave signal by a strongly driven two-level system in a coplanar waveguide resonator. The effect known from optics as dressed-state lasing is observed with a single quantum system formed by a persistent current (flux) qubit. The transmission through the resonator is enhanced when the Rabi frequency of the driven qubit is tuned into resonance with one of the resonator modes. Amplification as well as linewidth narrowing of a weak probe signal has been observed. The laser emission at the resonator's fundamental mode has been studied by measuring the emission spectrum. We analyzed our system and found an excellent agreement between the experimental results and the theoretical predictions obtained in the dressed-state model.
△ Less
Submitted 14 May, 2012;
originally announced May 2012.
-
Measuring the influence of Casimir energy on superconducting phase transitions: a cross-correlation data analysis
Authors:
Annalisa Allocca,
Giuseppe Bimonte,
Detlef Born,
Enrico Calloni,
Giampiero Esposito,
Uwe Huebner,
Evgeni Il'ichev,
Luigi Rosa,
Francesco Tafuri
Abstract:
The ALADIN experiment aims at observing how the critical magnetic field of a superconducting Aluminum film is modified, when it constitutes one of the reflecting surfaces of a Casimir cavity. If successful, such an observation would reveal the influence of vacuum energy on the superconducting phase transition. In this paper a rigorous analysis of experimental data is reported, the results are disc…
▽ More
The ALADIN experiment aims at observing how the critical magnetic field of a superconducting Aluminum film is modified, when it constitutes one of the reflecting surfaces of a Casimir cavity. If successful, such an observation would reveal the influence of vacuum energy on the superconducting phase transition. In this paper a rigorous analysis of experimental data is reported, the results are discussed and compared with theoretical predictions based on Lifshitz theory of dispersion forces, and the BCS formula for the optical conductivity of superconductors. The main novelty with respect to a previous data analysis by some of the authors, is the use of a cross-correlation method which is more rigorous and leads to better estimates.
△ Less
Submitted 11 May, 2012;
originally announced May 2012.
-
Spectroscopy of a Qubit Array via a Single Transmission Line
Authors:
M. Jerger,
S. Poletto,
P. Macha,
U. Huebner,
A. Lukashenko,
E. Il'ichev,
A. V. Ustinov
Abstract:
Frequency-selective readout for superconducting qubits opens the way towards scaling qubit circuits up without increasing the number of measurement lines. Here we demonstrate the readout of an array of 7 flux qubits located on the same chip. Each qubit is placed near an individual lambda/4 resonator which, in turn, is coupled to a common microwave transmission line. We performed spectroscopy of al…
▽ More
Frequency-selective readout for superconducting qubits opens the way towards scaling qubit circuits up without increasing the number of measurement lines. Here we demonstrate the readout of an array of 7 flux qubits located on the same chip. Each qubit is placed near an individual lambda/4 resonator which, in turn, is coupled to a common microwave transmission line. We performed spectroscopy of all qubits and determined their parameters in a single measurement run.
△ Less
Submitted 2 February, 2011;
originally announced February 2011.
-
Doubly resonant optical nanoantenna arrays for polarization resolved measurements of surface-enhanced Raman scattering
Authors:
J. Petschulat,
D. Cialla,
N. Janunts,
C. Rockstuhl,
U. Huebner,
R. Moeller,
H. Schneidewind,
R. Mattheis,
J. Popp,
A. Tuennermann,
F. Lederer,
T. Pertsch
Abstract:
We report that rhomb-shaped metal nanoantenna arrays support multiple plasmonic resonances, making them favorable bio-sensing substrates. Besides the two localized plasmonic dipole modes associated with the two principle axes of the rhombi, the sample supports an additional grating-induced surface plasmon polariton resonance. The plasmonic properties of all modes are carefully studied by far-fie…
▽ More
We report that rhomb-shaped metal nanoantenna arrays support multiple plasmonic resonances, making them favorable bio-sensing substrates. Besides the two localized plasmonic dipole modes associated with the two principle axes of the rhombi, the sample supports an additional grating-induced surface plasmon polariton resonance. The plasmonic properties of all modes are carefully studied by far-field measurements together with numerical and analytical calculations. The sample is then applied to surface-enhanced Raman scattering measurements. It is shown to be highly efficient since two plasmonic resonances of the structure were simultaneously tuned to coincide with the excitation and the emission wave- length in the SERS experiment. The analysis is completed by measuring the impact of the polarization angle on the SERS signal.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
-
Weak continuous monitoring of a flux qubit using coplanar waveguide resonator
Authors:
G. Oelsner,
S. H. W. van der Ploeg,
P. Macha,
U. Hübner,
D. Born,
E. Il'ichev,
H. -G. Meyer,
M. Grajcar,
S. Wünsch,
M. Siegel,
A. N. Omelyanchouk,
O. Astafiev
Abstract:
We study a flux qubit in a coplanar waveguide resonator by measuring transmission through the system. In our system with the flux qubit decoupled galvanically from the resonator, the intermediate coupling regime is achieved. In this regime dispersive readout is possible with weak backaction on the qubit. The detailed theoretical analysis and simulations give a good agreement with the experimental…
▽ More
We study a flux qubit in a coplanar waveguide resonator by measuring transmission through the system. In our system with the flux qubit decoupled galvanically from the resonator, the intermediate coupling regime is achieved. In this regime dispersive readout is possible with weak backaction on the qubit. The detailed theoretical analysis and simulations give a good agreement with the experimental data and allow to make the qubit characterization.
△ Less
Submitted 10 May, 2010; v1 submitted 25 October, 2009;
originally announced October 2009.
-
Consistency of ground state and spectroscopic measurements on flux qubits
Authors:
A. Izmalkov,
S. H. W. van der Ploeg,
S. N. Shevchenko,
M. Grajcar,
E. Il'ichev,
U. Hübner,
A. N. Omelyanchouk,
H. -G. Meyer
Abstract:
We compare the results of ground state and spectroscopic measurements carried out on superconducting flux qubits which are effective two-level quantum systems. For a single qubit and for two coupled qubits we show excellent agreement between the parameters of the pseudospin Hamiltonian found using both methods. We argue, that by making use of the ground state measurements the Hamiltonian of N co…
▽ More
We compare the results of ground state and spectroscopic measurements carried out on superconducting flux qubits which are effective two-level quantum systems. For a single qubit and for two coupled qubits we show excellent agreement between the parameters of the pseudospin Hamiltonian found using both methods. We argue, that by making use of the ground state measurements the Hamiltonian of N coupled flux qubits can be reconstructed as well at temperatures smaller than the energy level separation. Such a reconstruction of a many-qubit Hamiltonian can be useful for future quantum information processing devices.
△ Less
Submitted 28 August, 2008;
originally announced August 2008.
-
Low noise cryogenic system for the measurement of Casimir energy in rigid cavities
Authors:
Giuseppe Bimonte,
Detlef Born,
Enrico Calloni,
Giampiero Esposito,
Uwe Huebner,
Evgeni Il'ichev,
Luigi Rosa,
Francesco Tafuri,
Ruggero Vaglio
Abstract:
We report on preliminary results on the measurement of variations of the Casimir energy in rigid cavities through its influence on the superconducting transition of in-cavity aluminium (Al) thin films. After a description of the experimental apparatus we report on a measurement made with thermal photons, discussing its implications for the zero-point photons case. Finally we show the preliminary…
▽ More
We report on preliminary results on the measurement of variations of the Casimir energy in rigid cavities through its influence on the superconducting transition of in-cavity aluminium (Al) thin films. After a description of the experimental apparatus we report on a measurement made with thermal photons, discussing its implications for the zero-point photons case. Finally we show the preliminary results for the zero-point case.
△ Less
Submitted 18 January, 2008; v1 submitted 22 October, 2007;
originally announced October 2007.
-
Adiabatic quantum computation with flux qubits, first experimental results
Authors:
S. H. W. van der Ploeg,
A. Izmalkov,
M. Grajcar,
U. Huebner,
S. Linzen,
S. Uchaikin,
Th. Wagner,
A. Yu. Smirnov,
A. Maassen van den Brink,
M. H. S. Amin,
A. M. Zagoskin,
E. Il'ichev,
H. -G. Meyer
Abstract:
Controllable adiabatic evolution of a multi-qubit system can be used for adiabatic quantum computation (AQC). This evolution ends at a configuration where the Hamiltonian of the system encodes the solution of the problem to be solved. As a first steps towards realization of AQC we have investigated two, three and four flux qubit systems. These systems were characterized by making use of a radio-…
▽ More
Controllable adiabatic evolution of a multi-qubit system can be used for adiabatic quantum computation (AQC). This evolution ends at a configuration where the Hamiltonian of the system encodes the solution of the problem to be solved. As a first steps towards realization of AQC we have investigated two, three and four flux qubit systems. These systems were characterized by making use of a radio-frequency method. We designed two-qubit systems with coupling energies up to several kelvins. For the three-flux-qubit systems we determined the complete ground-state flux diagram in the three dimensional flux space around the qubits common degeneracy point. We show that the system`s Hamiltonian can be completely reconstructed from our measurements. Our concept for the implementation of AQC, by making use of flux qubits, is discussed.
△ Less
Submitted 25 February, 2007;
originally announced February 2007.
-
The Aladin2 experiment: sensitivity study
Authors:
Giuseppe Bimonte,
Detlef Born,
Enrico Calloni,
Giampiero Esposito,
Uwe Hubner,
Evgeni Il'ichev,
Luigi Rosa,
Ornella Scaldaferri,
Francesco Tafuri,
Ruggero Vaglio
Abstract:
Aladin2 is an experiment devoted to the first measurement of variations of Casimir energy in a rigid body. The main short-term scientific motivation relies on the possibility of the first demonstration of a phase transition influenced by vacuum fluctuations while, in the long term and in the mainframe of the cosmological constant problem, it can be regarded as the first step towards a measuremen…
▽ More
Aladin2 is an experiment devoted to the first measurement of variations of Casimir energy in a rigid body. The main short-term scientific motivation relies on the possibility of the first demonstration of a phase transition influenced by vacuum fluctuations while, in the long term and in the mainframe of the cosmological constant problem, it can be regarded as the first step towards a measurement of the weight of vacuum energy. In this paper, after a presentation of the guiding principle of the measurement, the experimental apparatus and sensitivity studies on final cavities will be presented.
△ Less
Submitted 6 June, 2006;
originally announced June 2006.
-
Controllable coupling of superconducting flux qubits
Authors:
S. H. W. van der Ploeg,
A. Izmalkov,
Alec Maassen van den Brink,
U. Huebner,
M. Grajcar,
E. Il'ichev,
H. -G. Meyer,
A. M. Zagoskin
Abstract:
We have realized controllable coupling between two three-junction flux qubits by inserting an additional coupler loop between them, containing three Josephson junctions. Two of these are shared with the qubit loops, providing strong qubit--coupler interaction. The third junction gives the coupler a nontrivial current--flux relation; its derivative (i.e., the susceptibility) determines the coupli…
▽ More
We have realized controllable coupling between two three-junction flux qubits by inserting an additional coupler loop between them, containing three Josephson junctions. Two of these are shared with the qubit loops, providing strong qubit--coupler interaction. The third junction gives the coupler a nontrivial current--flux relation; its derivative (i.e., the susceptibility) determines the coupling strength J, which thus is tunable in situ via the coupler's flux bias. In the qubit regime, J was varied from ~45 (antiferromagnetic) to ~ -55 mK (ferromagnetic); in particular, J vanishes for an intermediate coupler bias. Measurements on a second sample illuminate the relation between two-qubit tunable coupling and three-qubit behavior.
△ Less
Submitted 23 May, 2007; v1 submitted 24 May, 2006;
originally announced May 2006.
-
Measurement of the ground-state flux diagram of three coupled qubits as a first step towards the demonstration of adiabatic quantum computation
Authors:
A. Izmalkov,
M. Grajcar,
S. H. W. van der Ploeg,
U. Huebner,
E. Il'ichev,
H. -G. Meyer,
A. M. Zagoskin
Abstract:
The ground state susceptibility of a system consisting of three flux-qubits was measured in the complete three dimensional flux space around the common degeneracy point of the qubits. The system's Hamiltonian could be completely reconstructed from measurements made far away from the common degeneracy point. The subsequent measurements made around this point show complete agreement with the theor…
▽ More
The ground state susceptibility of a system consisting of three flux-qubits was measured in the complete three dimensional flux space around the common degeneracy point of the qubits. The system's Hamiltonian could be completely reconstructed from measurements made far away from the common degeneracy point. The subsequent measurements made around this point show complete agreement with the theoretical predictions which follow from this Hamiltonian. The ground state anti-crossings of the system could be read-out directly from these measurements. This allows one to determine the ground-state flux diagram, which provides the solution for the non-polynomial optimization problem MAXCUT encoded in the Hamiltonian of the three-flux-qubit system. Our results show that adiabatic quantum computation can be demonstrated with this system provided that the energy gap and/or the speed of the read-out is increased.
△ Less
Submitted 12 October, 2006; v1 submitted 2 May, 2006;
originally announced May 2006.
-
The Aladin2 experiment: status and perspectives
Authors:
Giuseppe Bimonte,
Detlef Born,
Enrico Calloni,
Giampiero Esposito,
Uve Hubner,
Evgeni Il'ichev,
Luigi Rosa,
Ornella Scaldaferri,
Francesco Tafuri,
Ruggero Vaglio
Abstract:
Aladin2 is an experiment devoted to the first measurement of variations of Casimir energy in a rigid cavity. The main scientific motivation relies on the possibility of the first demonstration of a phase transition influenced by vacuum fluctuations. The guiding principle of the measurement, based on the behaviour of the critical field for an in-cavity superconducting film, will be only briefly r…
▽ More
Aladin2 is an experiment devoted to the first measurement of variations of Casimir energy in a rigid cavity. The main scientific motivation relies on the possibility of the first demonstration of a phase transition influenced by vacuum fluctuations. The guiding principle of the measurement, based on the behaviour of the critical field for an in-cavity superconducting film, will be only briefly recalled. In this paper, after an introduction to the long term motivations, the experimental apparatus and the results of the first measurement of sensitivity will be presented in detail, particularly in comparison with the expected signal. Last, the most important steps towards the final measurement will be discussed.
△ Less
Submitted 15 November, 2005;
originally announced November 2005.
-
Four-qubit device with mixed couplings
Authors:
M. Grajcar,
A. Izmalkov,
S. H. W. van der Ploeg,
S. Linzen,
T. Plecenik,
Th. Wagner,
U. Huebner,
E. Il'ichev,
H. -G. Meyer,
A. Yu. Smirnov,
Peter J. Love,
Alec Maassen van den Brink,
M. H. S. Amin,
S. Uchaikin,
A. M. Zagoskin
Abstract:
We present the first experimental results on a device with more than two superconducting qubits. The circuit consists of four three-junction flux qubits, with simultaneous ferro- and antiferromagnetic coupling implemented using shared Josephson junctions. Its response, which is dominated by the ground state, is characterized using low-frequency impedance measurement with a superconducting tank c…
▽ More
We present the first experimental results on a device with more than two superconducting qubits. The circuit consists of four three-junction flux qubits, with simultaneous ferro- and antiferromagnetic coupling implemented using shared Josephson junctions. Its response, which is dominated by the ground state, is characterized using low-frequency impedance measurement with a superconducting tank circuit coupled to the qubits. The results are found to be in excellent agreement with the quantum-mechanical predictions.
△ Less
Submitted 2 February, 2006; v1 submitted 21 September, 2005;
originally announced September 2005.
-
Direct Josephson coupling between superconducting flux qubits
Authors:
M. Grajcar,
A. Izmalkov,
S. H. W. van der Ploeg,
S. Linzen,
E. Il'ichev,
Th. Wagner,
U. Hubner,
H. -G. Meyer,
Alec Maassen van den Brink,
S. Uchaikin,
A. M. Zagoskin
Abstract:
We have demonstrated strong antiferromagnetic coupling between two three-junction flux qubits based on a shared Josephson junction, and therefore not limited by the small inductances of the qubit loops. The coupling sign and magnitude were measured by coupling the system to a high-quality superconducting tank circuit. Design modifications allowing to continuously tune the coupling strength and/o…
▽ More
We have demonstrated strong antiferromagnetic coupling between two three-junction flux qubits based on a shared Josephson junction, and therefore not limited by the small inductances of the qubit loops. The coupling sign and magnitude were measured by coupling the system to a high-quality superconducting tank circuit. Design modifications allowing to continuously tune the coupling strength and/or make the coupling ferromagnetic are discussed.
△ Less
Submitted 29 March, 2005; v1 submitted 5 January, 2005;
originally announced January 2005.
-
Reading-out the state inductively and microwave spectroscopy of an interferometer-type charge qubit
Authors:
D. Born,
V. I. Shnyrkov,
W. Krech,
Th. Wagner,
E. Il'ichev,
M. Grajcar,
U. Huebner,
H. -G. Meyer
Abstract:
We implemented experimentally an interferometer-type charge qubit consisting of a single-Cooper-pair transistor closed by a superconducting loop that is in flip-chip configuration inductively coupled to a radio frequency tank circuit. The tank permits to readout the qubit state, acting as inductance measuring apparatus. By applying continuous microwave power to the quantum device, we observed in…
▽ More
We implemented experimentally an interferometer-type charge qubit consisting of a single-Cooper-pair transistor closed by a superconducting loop that is in flip-chip configuration inductively coupled to a radio frequency tank circuit. The tank permits to readout the qubit state, acting as inductance measuring apparatus. By applying continuous microwave power to the quantum device, we observed inductance alterations caused by redistributions of the energy level populations. From the measured data, we extracted the energy gap between ground and upper levels as a function of the transistor quasicharge as well as the Josephson phase across both junctions.
△ Less
Submitted 30 September, 2004; v1 submitted 30 December, 2003;
originally announced December 2003.
-
Low-frequency measurement of the tunneling amplitude in a flux qubit
Authors:
M. Grajcar,
A. Izmalkov,
E. Il'ichev,
Th. Wagner,
N. Oukhanski,
U. Huebner,
T. May,
I. Zhilyaev,
H. E. Hoenig,
Ya. S. Greenberg,
V. I. Shnyrkov,
D. Born,
W. Krech,
H. -G. Meyer,
Alec Maassen van den Brink,
M. H. S. Amin
Abstract:
We have observed signatures of resonant tunneling in an Al three-junction qubit, inductively coupled to a Nb LC tank circuit. The resonant properties of the tank oscillator are sensitive to the effective susceptibility (or inductance) of the qubit, which changes drastically as its flux states pass through degeneracy. The tunneling amplitude is estimated from the data. We find good agreement with…
▽ More
We have observed signatures of resonant tunneling in an Al three-junction qubit, inductively coupled to a Nb LC tank circuit. The resonant properties of the tank oscillator are sensitive to the effective susceptibility (or inductance) of the qubit, which changes drastically as its flux states pass through degeneracy. The tunneling amplitude is estimated from the data. We find good agreement with the theoretical predictions in the regime of their validity.
△ Less
Submitted 12 January, 2004; v1 submitted 31 March, 2003;
originally announced March 2003.