-
Measurements of E-Mode Polarization and Temperature-E-Mode Correlation in the Cosmic Microwave Background from 100 Square Degrees of SPTpol Data
Authors:
A. T. Crites,
J. W. Henning,
P. A. R. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
J. E. Carstrom,
C. L. Chang,
H. C. Chiang,
H-M. Cho,
R. Citron,
T. M. Crawford,
T. De Haan,
M. A. Dobbs,
W. Everett,
J Gallicchio,
J. Gao,
E. M. George,
A. Gilbert,
N. W. Halverson,
D. Hanson,
N. Harrington
, et al. (41 additional authors not shown)
Abstract:
We present measurements of $E$-mode polarization and temperature-$E$-mode correlation in the cosmic microwave background (CMB) using data from the first season of observations with SPTpol, the polarization-sensitive receiver currently installed on the South Pole Telescope (SPT). The observations used in this work cover 100~\sqdeg\ of sky with arcminute resolution at $150\,$GHz. We report the $E$-m…
▽ More
We present measurements of $E$-mode polarization and temperature-$E$-mode correlation in the cosmic microwave background (CMB) using data from the first season of observations with SPTpol, the polarization-sensitive receiver currently installed on the South Pole Telescope (SPT). The observations used in this work cover 100~\sqdeg\ of sky with arcminute resolution at $150\,$GHz. We report the $E$-mode angular auto-power spectrum ($EE$) and the temperature-$E$-mode angular cross-power spectrum ($TE$) over the multipole range $500 < \ell \leq5000$. These power spectra improve on previous measurements in the high-$\ell$ (small-scale) regime. We fit the combination of the SPTpol power spectra, data from \planck\, and previous SPT measurements with a six-parameter \LCDM cosmological model. We find that the best-fit parameters are consistent with previous results. The improvement in high-$\ell$ sensitivity over previous measurements leads to a significant improvement in the limit on polarized point-source power: after masking sources brighter than 50\,mJy in unpolarized flux at 150\,GHz, we find a 95\% confidence upper limit on unclustered point-source power in the $EE$ spectrum of $D_\ell = \ell (\ell+1) C_\ell / 2 π< 0.40 \ μ{\mbox{K}}^2$ at $\ell=3000$, indicating that future $EE$ measurements will not be limited by power from unclustered point sources in the multipole range $\ell < 3600$, and possibly much higher in $\ell.$
△ Less
Submitted 4 November, 2014;
originally announced November 2014.
-
The Next Generation BLAST Experiment
Authors:
Nicholas Galitzki,
Peter A. R. Ade,
Francesco E. Angilè,
Peter Ashton,
James A. Beall,
Dan Becker,
Kristi J. Bradford,
George Che,
Hsiao-Mei Cho,
Mark J. Devlin,
Bradley J. Dober,
Laura M. Fissel,
Yasuo Fukui,
Jiansong Gao,
Christopher E. Groppi,
Seth Hillbrand,
Gene C. Hilton,
Johannes Hubmayr,
Kent D. Irwin,
Jeffrey Klein,
Jeff Van Lanen,
Dale Li,
Zhi-Yun Li,
Nathan P. Lourie,
Hamdi Mani
, et al. (16 additional authors not shown)
Abstract:
The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) was a suborbital experiment designed to map magnetic fields in order to study their role in star formation processes. BLASTPol made detailed polarization maps of a number of molecular clouds during its successful flights from Antarctica in 2010 and 2012. We present the next-generation BLASTPol instrument (BLAST-TNG…
▽ More
The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) was a suborbital experiment designed to map magnetic fields in order to study their role in star formation processes. BLASTPol made detailed polarization maps of a number of molecular clouds during its successful flights from Antarctica in 2010 and 2012. We present the next-generation BLASTPol instrument (BLAST-TNG) that will build off the success of the previous experiment and continue its role as a unique instrument and a test bed for new technologies. With a 16-fold increase in map** speed, BLAST-TNG will make larger and deeper maps. Major improvements include a 2.5 m carbon fiber mirror that is 40% wider than the BLASTPol mirror and ~3000 polarization sensitive detectors. BLAST-TNG will observe in three bands at 250, 350, and 500 microns. The telescope will serve as a pathfinder project for microwave kinetic inductance detector (MKID) technology, as applied to feedhorn coupled submillimeter detector arrays. The liquid helium cooled cryostat will have a 28-day hold time and will utilize a closed-cycle $^3$He refrigerator to cool the detector arrays to 270 mK. This will enable a detailed map** of more targets with higher polarization resolution than any other submillimeter experiment to date. BLAST-TNG will also be the first balloon-borne telescope to offer shared risk observing time to the community. This paper outlines the motivation for the project and the instrumental design.
△ Less
Submitted 12 November, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
-
The next-generation BLASTPol experiment
Authors:
Bradley Dober,
Peter A. R. Ade,
Peter Ashton,
Francesco E. Angilè,
James A. Beall,
Dan Becker,
Kristi J. Bradford,
George Che,
Hsiao-Mei Cho,
Mark J. Devlin,
Laura M. Fissel,
Yasuo Fukui,
Nicholas Galitzki,
Jiansong Gao,
Christopher E. Groppi,
Seth Hillbrand,
Gene C. Hilton,
Johannes Hubmayr,
Kent D. Irwin,
Jeffrey Klein,
Jeff Van Lanen,
Dale Li,
Zhi-Yun Li,
Nathan P. Lourie,
Hamdi Mani
, et al. (14 additional authors not shown)
Abstract:
The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital map** experiment designed to study the role magnetic fields play in star formation. BLASTPol has had two science flights from McMurdo Station, Antarctica in 2010 and 2012. These flights have produced thousands of polarization vectors at 250, 350 and 500 microns in several molecular cloud targets.…
▽ More
The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital map** experiment designed to study the role magnetic fields play in star formation. BLASTPol has had two science flights from McMurdo Station, Antarctica in 2010 and 2012. These flights have produced thousands of polarization vectors at 250, 350 and 500 microns in several molecular cloud targets. We present the design, specifications, and progress towards the next-generation BLASTPol experiment (BLAST-TNG). BLAST-TNG will fly a 40% larger diameter primary mirror, with almost 8 times the number of polarization-sensitive detectors resulting in a factor of 16 increase in map** speed. With a spatial resolution of 22 arcseconds and four times the field of view of BLASTPol, BLAST-TNG will bridge the angular scales between Planck's low resolution all-sky maps and ALMA's ultra-high resolution narrow fields. The new receiver has a larger cryogenics volume, allowing for a 28 day hold time. BLAST-TNG employs three arrays of Microwave Kinetic Inductance Detectors (MKIDs) with 30% fractional bandwidth at 250, 350 and 500 microns. In this paper, we will present the new BLAST-TNG instrument and science objectives.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
Photon-noise limited sensitivity in titanium nitride kinetic inductance detectors
Authors:
Johannes Hubmayr,
Jim Beall,
Dan Becker,
Hsaio-Mei Cho,
Mark Devlin,
Bradley Dober,
Chris Groppi,
Gene C. Hilton,
Kent D. Irwin,
Dale Li,
Phillip Mauskopf,
Dave P. Pappas,
Jeff Van Lanen,
Michael R. Vissers,
Yiwen Wang,
Lian-Fu Wei,
Jiansong Gao
Abstract:
We demonstrate photon-noise limited performance at sub-millimeter wavelengths in feedhorn-coupled, microwave kinetic inductance detectors (MKIDs) made of a TiN/Ti/TiN trilayer superconducting film, tuned to have a transition temperature of 1.4~K. Micro-machining of the silicon-on-insulator wafer backside creates a quarter-wavelength backshort optimized for efficient coupling at 250~\micron. Using…
▽ More
We demonstrate photon-noise limited performance at sub-millimeter wavelengths in feedhorn-coupled, microwave kinetic inductance detectors (MKIDs) made of a TiN/Ti/TiN trilayer superconducting film, tuned to have a transition temperature of 1.4~K. Micro-machining of the silicon-on-insulator wafer backside creates a quarter-wavelength backshort optimized for efficient coupling at 250~\micron. Using frequency read out and when viewing a variable temperature blackbody source, we measure device noise consistent with photon noise when the incident optical power is $>$~0.5~pW, corresponding to noise equivalent powers $>$~3$\times 10^{-17}$ W/$\sqrt{\mathrm{Hz}}$. This sensitivity makes these devices suitable for broadband photometric applications at these wavelengths.
△ Less
Submitted 23 March, 2015; v1 submitted 16 June, 2014;
originally announced June 2014.
-
The Atacama Cosmology Telescope: CMB Polarization at $200<\ell<9000$
Authors:
Sigurd Naess,
Matthew Hasselfield,
Jeff McMahon,
Michael D. Niemack,
Graeme E. Addison,
Peter A. R. Ade,
Rupert Allison,
Mandana Amiri,
Nick Battaglia,
James A. Beall,
Francesco de Bernardis,
J Richard Bond,
Joe Britton,
Erminia Calabrese,
Hsiao-mei Cho,
Kevin Coughlin,
Devin Crichton,
Sudeep Das,
Rahul Datta,
Mark J. Devlin,
Simon R. Dicker,
Joanna Dunkley,
Rolando Dünner,
Joseph W. Fowler,
Anna E. Fox
, et al. (53 additional authors not shown)
Abstract:
We report on measurements of the cosmic microwave background (CMB) and celestial polarization at 146 GHz made with the Atacama Cosmology Telescope Polarimeter (ACTPol) in its first three months of observing. Four regions of sky covering a total of 270 square degrees were mapped with an angular resolution of $1.3'$. The map noise levels in the four regions are between 11 and 17 $μ$K-arcmin. We pres…
▽ More
We report on measurements of the cosmic microwave background (CMB) and celestial polarization at 146 GHz made with the Atacama Cosmology Telescope Polarimeter (ACTPol) in its first three months of observing. Four regions of sky covering a total of 270 square degrees were mapped with an angular resolution of $1.3'$. The map noise levels in the four regions are between 11 and 17 $μ$K-arcmin. We present TT, TE, EE, TB, EB, and BB power spectra from three of these regions. The observed E-mode polarization power spectrum, displaying six acoustic peaks in the range $200<\ell<3000$, is an excellent fit to the prediction of the best-fit cosmological models from WMAP9+ACT and Planck data. The polarization power spectrum, which mainly reflects primordial plasma velocity perturbations, provides an independent determination of cosmological parameters consistent with those based on the temperature power spectrum, which results mostly from primordial density perturbations. We find that without masking any point sources in the EE data at $\ell<9000$, the Poisson tail of the EE power spectrum due to polarized point sources has an amplitude less than $2.4$ $μ$K$^2$ at $\ell = 3000$ at 95\% confidence. Finally, we report that the Crab Nebula, an important polarization calibration source at microwave frequencies, has 8.7\% polarization with an angle of $150.7^\circ \pm 0.6^\circ$ when smoothed with a $5'$ Gaussian beam.
△ Less
Submitted 21 September, 2014; v1 submitted 21 May, 2014;
originally announced May 2014.
-
Horn Coupled Multichroic Polarimeters for the Atacama Cosmology Telescope Polarization Experiment
Authors:
Rahul Datta,
Johannes Hubmayr,
Charles Munson,
Jason Austermann,
James Beall,
Dan Becker,
Hsiao-Mei Cho,
Nils Halverson,
Gene Hilton,
Kent Irwin,
Dale Li,
Jeff McMahon,
Laura Newburgh,
John Nibarger,
Michael Niemack,
Benjamin Schmitt,
Harrison Smith,
Suzanne Staggs,
Jeff Van Lanen,
Edward Wollack
Abstract:
Multichroic polarization sensitive detectors enable increased sensitivity and spectral coverage for observations of the Cosmic Microwave Background (CMB). An array optimized for dual frequency detectors can provide 1.7 times gain in sensitivity compared to a single frequency array. We present the design and measurements of horn coupled multichroic polarimeters encompassing the 90 and 150 GHz frequ…
▽ More
Multichroic polarization sensitive detectors enable increased sensitivity and spectral coverage for observations of the Cosmic Microwave Background (CMB). An array optimized for dual frequency detectors can provide 1.7 times gain in sensitivity compared to a single frequency array. We present the design and measurements of horn coupled multichroic polarimeters encompassing the 90 and 150 GHz frequency bands and discuss our plans to field an array of these detectors as part of the ACTPol project.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
A Study of Al-Mn Transition Edge Sensor Engineering for Stability
Authors:
E. M. George,
J. E. Austermann,
J. A. Beall,
D. Becker,
B. A. Benson,
L. E. Bleem,
J. E. Carlstrom,
C. L. Chang,
H- M. Cho,
A. T. Crites,
M. A. Dobbs,
W. Everett,
N. W. Halverson,
J. W. Henning,
G. C. Hilton,
W. L. Holzapfel,
J. Hubmayr,
K. D. Irwin,
D. Li,
M. Lueker,
J. J. McMahon,
J. Mehl,
J. Montgomery,
T. Natoli,
J. P. Nibarger
, et al. (10 additional authors not shown)
Abstract:
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We…
▽ More
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We conclude that parameters affecting device stability can be engineered for optimal device operation, and present the model parameters extracted for the different TES designs.
△ Less
Submitted 10 November, 2013;
originally announced November 2013.
-
Neutrino Physics from the Cosmic Microwave Background and Large Scale Structure
Authors:
K. N. Abazajian,
K. Arnold,
J. Austermann,
B. A. Benson,
C. Bischoff,
J. Bock,
J. R. Bond,
J. Borrill,
E. Calabrese,
J. E. Carlstrom,
C. S. Carvalho,
C. L. Chang,
H. C. Chiang,
S. Church,
A. Cooray,
T. M. Crawford,
K. S. Dawson,
S. Das,
M. J. Devlin,
M. Dobbs,
S. Dodelson,
O. Dore,
J. Dunkley,
J. Errard,
A. Fraisse
, et al. (52 additional authors not shown)
Abstract:
This is a report on the status and prospects of the quantification of neutrino properties through the cosmological neutrino background for the Cosmic Frontier of the Division of Particles and Fields Community Summer Study long-term planning exercise. Experiments planned and underway are prepared to study the cosmological neutrino background in detail via its influence on distance-redshift relation…
▽ More
This is a report on the status and prospects of the quantification of neutrino properties through the cosmological neutrino background for the Cosmic Frontier of the Division of Particles and Fields Community Summer Study long-term planning exercise. Experiments planned and underway are prepared to study the cosmological neutrino background in detail via its influence on distance-redshift relations and the growth of structure. The program for the next decade described in this document, including upcoming spectroscopic galaxy surveys eBOSS and DESI and a new Stage-IV CMB polarization experiment CMB-S4, will achieve sigma(sum m_nu) = 16 meV and sigma(N_eff) = 0.020. Such a mass measurement will produce a high significance detection of non-zero sum m_nu, whose lower bound derived from atmospheric and solar neutrino oscillation data is about 58 meV. If neutrinos have a minimal normal mass hierarchy, this measurement will definitively rule out the inverted neutrino mass hierarchy, shedding light on one of the most puzzling aspects of the Standard Model of particle physics --- the origin of mass. This precise a measurement of N_eff will allow for high sensitivity to any light and dark degrees of freedom produced in the big bang and a precision test of the standard cosmological model prediction that N_eff = 3.046.
△ Less
Submitted 30 May, 2014; v1 submitted 20 September, 2013;
originally announced September 2013.
-
Inflation Physics from the Cosmic Microwave Background and Large Scale Structure
Authors:
K. N. Abazajian,
K. Arnold,
J. Austermann,
B. A. Benson,
C. Bischoff,
J. Bock,
J. R. Bond,
J. Borrill,
I. Buder,
D. L. Burke,
E. Calabrese,
J. E. Carlstrom,
C. S. Carvalho,
C. L. Chang,
H. C. Chiang,
S. Church,
A. Cooray,
T. M. Crawford,
B. P. Crill,
K. S. Dawson,
S. Das,
M. J. Devlin,
M. Dobbs,
S. Dodelson,
O. Doré
, et al. (69 additional authors not shown)
Abstract:
Fluctuations in the intensity and polarization of the cosmic microwave background (CMB) and the large-scale distribution of matter in the universe each contain clues about the nature of the earliest moments of time. The next generation of CMB and large-scale structure (LSS) experiments are poised to test the leading paradigm for these earliest moments---the theory of cosmic inflation---and to dete…
▽ More
Fluctuations in the intensity and polarization of the cosmic microwave background (CMB) and the large-scale distribution of matter in the universe each contain clues about the nature of the earliest moments of time. The next generation of CMB and large-scale structure (LSS) experiments are poised to test the leading paradigm for these earliest moments---the theory of cosmic inflation---and to detect the imprints of the inflationary epoch, thereby dramatically increasing our understanding of fundamental physics and the early universe.
A future CMB experiment with sufficient angular resolution and frequency coverage that surveys at least 1% of the sky to a depth of 1 uK-arcmin can deliver a constraint on the tensor-to-scalar ratio that will either result in a 5-sigma measurement of the energy scale of inflation or rule out all large-field inflation models, even in the presence of foregrounds and the gravitational lensing B-mode signal. LSS experiments, particularly spectroscopic surveys such as the Dark Energy Spectroscopic Instrument, will complement the CMB effort by improving current constraints on running of the spectral index by up to a factor of four, improving constraints on curvature by a factor of ten, and providing non-Gaussianity constraints that are competitive with the current CMB bounds.
△ Less
Submitted 30 May, 2014; v1 submitted 20 September, 2013;
originally announced September 2013.
-
Detection of B-mode Polarization in the Cosmic Microwave Background with Data from the South Pole Telescope
Authors:
D. Hanson,
S. Hoover,
A. Crites,
P. A. R. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
J. J. Bock,
J. E. Carlstrom,
C. L. Chang,
H. C. Chiang,
H-M. Cho,
A. Conley,
T. M. Crawford,
T. de Haan,
M. A. Dobbs,
W. Everett,
J. Gallicchio,
J. Gao,
E. M. George,
N. W. Halverson,
N. Harrington
, et al. (43 additional authors not shown)
Abstract:
Gravitational lensing of the cosmic microwave background generates a curl pattern in the observed polarization. This "B-mode" signal provides a measure of the projected mass distribution over the entire observable Universe and also acts as a contaminant for the measurement of primordial gravity-wave signals. In this Letter we present the first detection of gravitational lensing B modes, using firs…
▽ More
Gravitational lensing of the cosmic microwave background generates a curl pattern in the observed polarization. This "B-mode" signal provides a measure of the projected mass distribution over the entire observable Universe and also acts as a contaminant for the measurement of primordial gravity-wave signals. In this Letter we present the first detection of gravitational lensing B modes, using first-season data from the polarization-sensitive receiver on the South Pole Telescope (SPTpol). We construct a template for the lensing B-mode signal by combining E-mode polarization measured by SPTpol with estimates of the lensing potential from a Herschel-SPIRE map of the cosmic infrared background. We compare this template to the B modes measured directly by SPTpol, finding a non-zero correlation at 7.7 sigma significance. The correlation has an amplitude and scale-dependence consistent with theoretical expectations, is robust with respect to analysis choices, and constitutes the first measurement of a powerful cosmological observable.
△ Less
Submitted 7 October, 2013; v1 submitted 22 July, 2013;
originally announced July 2013.
-
Large-aperture wide-bandwidth antireflection-coated silicon lenses for millimeter wavelengths
Authors:
R. Datta,
C. D. Munson,
M. D. Niemack,
J. J. McMahon,
J. Britton,
E. J. Wollack,
J. Beall,
M. J. Devlin,
J. Fowler,
P. Gallardo,
J. Hubmayr,
K. Irwin,
L. Newburgh,
J. P. Nibarger,
L. Page,
M. A. Quijada,
B. L. Schmitt,
S. T. Staggs,
R. Thornton,
L. Zhang
Abstract:
The increasing scale of cryogenic detector arrays for sub-millimeter and millimeter wavelength astrophysics has led to the need for large aperture, high index of refraction, low loss, cryogenic refracting optics. Silicon with n = 3.4, low loss, and relatively high thermal conductivity is a nearly optimal material for these purposes, but requires an antireflection (AR) coating with broad bandwidth,…
▽ More
The increasing scale of cryogenic detector arrays for sub-millimeter and millimeter wavelength astrophysics has led to the need for large aperture, high index of refraction, low loss, cryogenic refracting optics. Silicon with n = 3.4, low loss, and relatively high thermal conductivity is a nearly optimal material for these purposes, but requires an antireflection (AR) coating with broad bandwidth, low loss, low reflectance, and a matched coefficient of thermal expansion. We present an AR coating for curved silicon optics comprised of subwavelength features cut into the lens surface with a custom three axis silicon dicing saw. These features constitute a metamaterial that behaves as a simple dielectric coating. We have fabricated and coated silicon lenses as large as 33.4 cm in diameter with coatings optimized for use between 125-165 GHz. Our design reduces average reflections to a few tenths of a percent for angles of incidence up to 30 degrees with low cross-polarization. We describe the design, tolerance, manufacture, and measurements of these coatings and present measurements of the optical properties of silicon at millimeter wavelengths at cryogenic and room temperatures. This coating and lens fabrication approach is applicable from centimeter to sub-millimeter wavelengths and can be used to fabricate coatings with greater than octave bandwidth.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
Performance and on-sky optical characterization of the SPTpol instrument
Authors:
E. M. George,
P. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
D. Becker,
A. Bender,
B. A. Benson,
L. E. Bleem,
J. Britton,
J. E. Carlstrom,
C. L. Chang,
H. C. Chiang,
H-M. Cho,
T. M. Crawford,
A. T. Crites,
A. Datesman,
T. de Haan,
M. A. Dobbs,
W. Everett,
A. Ewall-Wice,
N. W. Halverson,
N. Harrington,
J. W. Henning,
G. C. Hilton
, et al. (40 additional authors not shown)
Abstract:
In January 2012, the 10m South Pole Telescope (SPT) was equipped with a polarization-sensitive camera, SPTpol, in order to measure the polarization anisotropy of the cosmic microwave background (CMB). Measurements of the polarization of the CMB at small angular scales (~several arcminutes) can detect the gravitational lensing of the CMB by large scale structure and constrain the sum of the neutrin…
▽ More
In January 2012, the 10m South Pole Telescope (SPT) was equipped with a polarization-sensitive camera, SPTpol, in order to measure the polarization anisotropy of the cosmic microwave background (CMB). Measurements of the polarization of the CMB at small angular scales (~several arcminutes) can detect the gravitational lensing of the CMB by large scale structure and constrain the sum of the neutrino masses. At large angular scales (~few degrees) CMB measurements can constrain the energy scale of Inflation. SPTpol is a two-color mm-wave camera that consists of 180 polarimeters at 90 GHz and 588 polarimeters at 150 GHz, with each polarimeter consisting of a dual transition edge sensor (TES) bolometers. The full complement of 150 GHz detectors consists of 7 arrays of 84 ortho-mode transducers (OMTs) that are stripline coupled to two TES detectors per OMT, developed by the TRUCE collaboration and fabricated at NIST. Each 90 GHz pixel consists of two antenna-coupled absorbers coupled to two TES detectors, developed with Argonne National Labs. The 1536 total detectors are read out with digital frequency-domain multiplexing (DfMUX). The SPTpol deployment represents the first on-sky tests of both of these detector technologies, and is one of the first deployed instruments using DfMUX readout technology. We present the details of the design, commissioning, deployment, on-sky optical characterization and detector performance of the complete SPTpol focal plane.
△ Less
Submitted 17 October, 2012;
originally announced October 2012.
-
SPTpol: an instrument for CMB polarization measurements with the South Pole Telescope
Authors:
J. E. Austermann,
K. A. Aird,
J. A. Beall,
D. Becker,
A. Bender,
B. A. Benson,
L. E. Bleem,
J. Britton,
J. E. Carlstrom,
C. L. Chang,
H. C. Chiang,
H. M. Cho,
T. M. Crawford,
A. T. Crites,
A. Datesman,
T. de Haan,
M. A. Dobbs,
E. M. George,
N. W. Halverson,
N. Harrington,
J. W. Henning,
G. C. Hilton,
G. P. Holder,
W. L. Holzapfel,
S. Hoover
, et al. (36 additional authors not shown)
Abstract:
SPTpol is a dual-frequency polarization-sensitive camera that was deployed on the 10-meter South Pole Telescope in January 2012. SPTpol will measure the polarization anisotropy of the cosmic microwave background (CMB) on angular scales spanning an arcminute to several degrees. The polarization sensitivity of SPTpol will enable a detection of the CMB "B-mode" polarization from the detection of the…
▽ More
SPTpol is a dual-frequency polarization-sensitive camera that was deployed on the 10-meter South Pole Telescope in January 2012. SPTpol will measure the polarization anisotropy of the cosmic microwave background (CMB) on angular scales spanning an arcminute to several degrees. The polarization sensitivity of SPTpol will enable a detection of the CMB "B-mode" polarization from the detection of the gravitational lensing of the CMB by large scale structure, and a detection or improved upper limit on a primordial signal due to inflationary gravity waves. The two measurements can be used to constrain the sum of the neutrino masses and the energy scale of inflation. These science goals can be achieved through the polarization sensitivity of the SPTpol camera and careful control of systematics. The SPTpol camera consists of 768 pixels, each containing two transition-edge sensor (TES) bolometers coupled to orthogonal polarizations, and a total of 1536 bolometers. The pixels are sensitive to light in one of two frequency bands centered at 90 and 150 GHz, with 180 pixels at 90 GHz and 588 pixels at 150 GHz. The SPTpol design has several features designed to control polarization systematics, including: single-moded feedhorns with low cross-polarization, bolometer pairs well-matched to difference atmospheric signals, an improved ground shield design based on far-sidelobe measurements of the SPT, and a small beam to reduce temperature to polarization leakage. We present an overview of the SPTpol instrument design, project status, and science projections.
△ Less
Submitted 17 October, 2012;
originally announced October 2012.
-
Feedhorn-coupled TES polarimeter camera modules at 150 GHz for CMB polarization measurements with SPTpol
Authors:
J. W. Henning,
P. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
D. Becker,
B. A. Benson,
L. E. Bleem,
J. Britton,
J. E. Carlstrom,
C. L. Chang,
H. -M. Cho,
T. M. Crawford,
A. T. Crites,
A. Datesman,
T. de Haan,
M A. Dobbs,
W. Everett,
A. Ewall-Wice,
E. M. George,
N. W. Halverson,
N. Harrington,
G. C. Hilton,
W. L. Holzapfel,
J. Hubmayr
, et al. (36 additional authors not shown)
Abstract:
The SPTpol camera is a dichroic polarimetric receiver at 90 and 150 GHz. Deployed in January 2012 on the South Pole Telescope (SPT), SPTpol is looking for faint polarization signals in the Cosmic Microwave Background (CMB). The camera consists of 180 individual Transition Edge Sensor (TES) polarimeters at 90 GHz and seven 84-polarimeter camera modules (a total of 588 polarimeters) at 150 GHz. We p…
▽ More
The SPTpol camera is a dichroic polarimetric receiver at 90 and 150 GHz. Deployed in January 2012 on the South Pole Telescope (SPT), SPTpol is looking for faint polarization signals in the Cosmic Microwave Background (CMB). The camera consists of 180 individual Transition Edge Sensor (TES) polarimeters at 90 GHz and seven 84-polarimeter camera modules (a total of 588 polarimeters) at 150 GHz. We present the design, dark characterization, and in-lab optical properties of the 150 GHz camera modules. The modules consist of photolithographed arrays of TES polarimeters coupled to silicon platelet arrays of corrugated feedhorns, both of which are fabricated at NIST-Boulder. In addition to mounting hardware and RF shielding, each module also contains a set of passive readout electronics for digital frequency-domain multiplexing. A single module, therefore, is fully functional as a miniature focal plane and can be tested independently. Across the modules tested before deployment, the detectors average a critical temperature of 478 mK, normal resistance R_N of 1.2 Ohm, unloaded saturation power of 22.5 pW, (detector-only) optical efficiency of ~ 90%, and have electrothermal time constants < 1 ms in transition.
△ Less
Submitted 17 October, 2012;
originally announced October 2012.
-
Design and characterization of 90 GHz feedhorn-coupled TES polarimeter pixels in the SPTpol camera
Authors:
J. T. Sayre,
P. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
D. Becker,
B. A. Benson,
L. E. Bleem,
J. Britton,
J. E. Carlstrom,
C. L. Chang,
H-M. Cho,
T. M. Crawford,
A. T. Crites,
A. Datesman,
T. de Haan,
M. A. Dobbs,
W. Everett,
A. Ewall-Wice,
E. M. George,
N. W. Halverson,
N. Harrington,
J. W. Henning,
G. C. Hilton,
W. L. Holzapfel
, et al. (36 additional authors not shown)
Abstract:
The SPTpol camera is a two-color, polarization-sensitive bolometer receiver, and was installed on the 10 meter South Pole Telescope in January 2012. SPTpol is designed to study the faint polarization signals in the Cosmic Microwave Background, with two primary scientific goals. One is to constrain the tensor-to-scalar ratio of perturbations in the primordial plasma, and thus constrain the space of…
▽ More
The SPTpol camera is a two-color, polarization-sensitive bolometer receiver, and was installed on the 10 meter South Pole Telescope in January 2012. SPTpol is designed to study the faint polarization signals in the Cosmic Microwave Background, with two primary scientific goals. One is to constrain the tensor-to-scalar ratio of perturbations in the primordial plasma, and thus constrain the space of permissible inflationary models. The other is to measure the weak lensing effect of large-scale structure on CMB polarization, which can be used to constrain the sum of neutrino masses as well as other growth-related parameters. The SPTpol focal plane consists of seven 84-element monolithic arrays of 150 GHz pixels (588 total) and 180 individual 90 GHz single-pixel modules. In this paper we present the design and characterization of the 90 GHz modules.
△ Less
Submitted 17 October, 2012;
originally announced October 2012.
-
South Pole Telescope Software Systems: Control, Monitoring, and Data Acquisition
Authors:
K. Story,
E. Leitch,
P. Ade,
K. A. Aird,
J. E. Austermann,
J. A. Beall,
D. Becker,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
J. Britton,
J. E. Carlstrom,
C. L. Chang,
H. C. Chiang,
H-M. Cho,
T. M. Crawford,
A. T. Crites,
A. Datesman,
T. de Haan,
M. A. Dobbs,
W. Everett,
A. Ewall-Wice,
E. M. George,
N. W. Halverson,
N. Harrington
, et al. (42 additional authors not shown)
Abstract:
We present the software system used to control and operate the South Pole Telescope. The South Pole Telescope is a 10-meter millimeter-wavelength telescope designed to measure anisotropies in the cosmic microwave background (CMB) at arcminute angular resolution. In the austral summer of 2011/12, the SPT was equipped with a new polarization-sensitive camera, which consists of 1536 transition-edge s…
▽ More
We present the software system used to control and operate the South Pole Telescope. The South Pole Telescope is a 10-meter millimeter-wavelength telescope designed to measure anisotropies in the cosmic microwave background (CMB) at arcminute angular resolution. In the austral summer of 2011/12, the SPT was equipped with a new polarization-sensitive camera, which consists of 1536 transition-edge sensor bolometers. The bolometers are read out using 36 independent digital frequency multiplexing (\dfmux) readout boards, each with its own embedded processors. These autonomous boards control and read out data from the focal plane with on-board software and firmware. An overall control software system running on a separate control computer controls the \dfmux boards, the cryostat and all other aspects of telescope operation. This control software collects and monitors data in real-time, and stores the data to disk for transfer to the United States for analysis.
△ Less
Submitted 17 October, 2012;
originally announced October 2012.
-
Multi-Chroic Feed-Horn Coupled TES Polarimeters
Authors:
J. McMahon,
J. Beall,
D. Becker,
H. M. Cho,
R. Datta. A. Fox,
N. Halverson,
J. Hubmayr,
K. Irwin,
J. Nibarger,
M. Niemack,
H. Smith
Abstract:
Multi-chroic polarization sensitive detectors offer an avenue to increase both the spectral coverage and sensitivity of instruments optimized for observations of the cosmic-microwave background (CMB) or sub-mm sky. We report on an effort to adapt the Truce Collaboration horn coupled bolometric polarimeters for operation over octave bandwidth. Development is focused on detectors operating in both t…
▽ More
Multi-chroic polarization sensitive detectors offer an avenue to increase both the spectral coverage and sensitivity of instruments optimized for observations of the cosmic-microwave background (CMB) or sub-mm sky. We report on an effort to adapt the Truce Collaboration horn coupled bolometric polarimeters for operation over octave bandwidth. Development is focused on detectors operating in both the 90 and 150 GHz bands which offer the highest CMB polarization to foreground ratio. We plan to deploy an array of 256 multi-chroic 90/150 GHz polarimeters with 1024 TES detectors on ACTPol in 2013, and there are proposals to use this technology for balloon-borne instruments. The combination of excellent control of beam systematics and sensitivity make this technology ideal for future ground, ballon, and space missions.
△ Less
Submitted 19 January, 2012; v1 submitted 19 January, 2012;
originally announced January 2012.
-
EBEX: A balloon-borne CMB polarization experiment
Authors:
Britt Reichborn-Kjennerud,
Asad M. Aboobaker,
Peter Ade,
Françcois Aubin,
Carlo Baccigalupi,
Chaoyun Bao,
Julian Borrill,
Christopher Cantalupo,
Daniel Chapman,
Joy Didier,
Matt Dobbs,
Julien Grain,
William Grainger,
Shaul Hanany,
Seth Hillbrand,
Johannes Hubmayr,
Andrew Jaffe,
Bradley Johnson,
Terry Jones,
Theodore Kisner,
Jeff Klein,
Andrei Korotkov,
Sam Leach,
Adrian Lee,
Lorne Levinson
, et al. (21 additional authors not shown)
Abstract:
EBEX is a NASA-funded balloon-borne experiment designed to measure the polarization of the cosmic microwave background (CMB). Observations will be made using 1432 transition edge sensor (TES) bolometric detectors read out with frequency multiplexed SQuIDs. EBEX will observe in three frequency bands centered at 150, 250, and 410 GHz, with 768, 384, and 280 detectors in each band, respectively. This…
▽ More
EBEX is a NASA-funded balloon-borne experiment designed to measure the polarization of the cosmic microwave background (CMB). Observations will be made using 1432 transition edge sensor (TES) bolometric detectors read out with frequency multiplexed SQuIDs. EBEX will observe in three frequency bands centered at 150, 250, and 410 GHz, with 768, 384, and 280 detectors in each band, respectively. This broad frequency coverage is designed to provide valuable information about polarized foreground signals from dust. The polarized sky signals will be modulated with an achromatic half wave plate (AHWP) rotating on a superconducting magnetic bearing (SMB) and analyzed with a fixed wire grid polarizer. EBEX will observe a patch covering ~1% of the sky with 8' resolution, allowing for observation of the angular power spectrum from \ell = 20 to 1000. This will allow EBEX to search for both the primordial B-mode signal predicted by inflation and the anticipated lensing B-mode signal. Calculations to predict EBEX constraints on r using expected noise levels show that, for a likelihood centered around zero and with negligible foregrounds, 99% of the area falls below r = 0.035. This value increases by a factor of 1.6 after a process of foreground subtraction. This estimate does not include systematic uncertainties. An engineering flight was launched in June, 2009, from Ft. Sumner, NM, and the long duration science flight in Antarctica is planned for 2011. These proceedings describe the EBEX instrument and the North American engineering flight.
△ Less
Submitted 21 July, 2010;
originally announced July 2010.
-
Corrugated Silicon Platelet Feed Horn Array for CMB Polarimetry at 150 GHz
Authors:
Joseph W. Britton,
John P. Nibarger,
Ki Won Yoon,
James A. Beall,
Dan Becker,
Hsiao-Mei Cho,
Gene C. Hilton,
Johannes Hubmayr,
Michael D. Niemack,
Kent D. Irwin
Abstract:
Next generation cosmic microwave background (CMB) polarization anisotropy measurements will feature focal plane arrays with more than 600 millimeter-wave detectors. We make use of high-resolution photolithography and wafer-scale etch tools to build planar arrays of corrugated platelet feeds in silicon with highly symmetric beams, low cross-polarization and low side lobes. A compact Au-plated corru…
▽ More
Next generation cosmic microwave background (CMB) polarization anisotropy measurements will feature focal plane arrays with more than 600 millimeter-wave detectors. We make use of high-resolution photolithography and wafer-scale etch tools to build planar arrays of corrugated platelet feeds in silicon with highly symmetric beams, low cross-polarization and low side lobes. A compact Au-plated corrugated Si feed designed for 150 GHz operation exhibited performance equivalent to that of electroformed feeds: ~-0.2 dB insertion loss, <-20 dB return loss from 120 GHz to 170 GHz, <-25 dB side lobes and <-23 dB cross-polarization. We are currently fabricating a 50 mm diameter array with 84 horns consisting of 33 Si platelets as a prototype for the SPTpol and ACTpol telescopes. Our fabrication facilities permit arrays up to 150 mm in diameter.
△ Less
Submitted 6 July, 2010;
originally announced July 2010.
-
Software systems for operation, control, and monitoring of the EBEX instrument
Authors:
Michael Milligan,
Peter Ade,
François Aubin,
Carlo Baccigalupi,
Chaoyun Bao,
Julian Borrill,
Christopher Cantalupo,
Daniel Chapman,
Joy Didier,
Matt Dobbs,
Will Grainger,
Shaul Hanany,
Seth Hillbrand,
Johannes Hubmayr,
Andrew Jaffe,
Bradley Johnson,
Theodore Kisner,
Jeff Klein,
Andrei Korotkov,
Sam Leach,
Adrian Lee,
Lorne Levinson,
Michele Limon,
Kevin MacDermid,
Tomotake Matsumura
, et al. (13 additional authors not shown)
Abstract:
We present the hardware and software systems implementing autonomous operation, distributed real-time monitoring, and control for the EBEX instrument. EBEX is a NASA-funded balloon-borne microwave polarimeter designed for a 14 day Antarctic flight that circumnavigates the pole. To meet its science goals the EBEX instrument autonomously executes several tasks in parallel: it collects attitude data…
▽ More
We present the hardware and software systems implementing autonomous operation, distributed real-time monitoring, and control for the EBEX instrument. EBEX is a NASA-funded balloon-borne microwave polarimeter designed for a 14 day Antarctic flight that circumnavigates the pole. To meet its science goals the EBEX instrument autonomously executes several tasks in parallel: it collects attitude data and maintains pointing control in order to adhere to an observing schedule; tunes and operates up to 1920 TES bolometers and 120 SQUID amplifiers controlled by as many as 30 embedded computers; coordinates and dispatches jobs across an onboard computer network to manage this detector readout system; logs over 3~GiB/hour of science and housekee** data to an onboard disk storage array; responds to a variety of commands and exogenous events; and downlinks multiple heterogeneous data streams representing a selected subset of the total logged data. Most of the systems implementing these functions have been tested during a recent engineering flight of the payload, and have proven to meet the target requirements. The EBEX ground segment couples uplink and downlink hardware to a client-server software stack, enabling real-time monitoring and command responsibility to be distributed across the public internet or other standard computer networks. Using the emerging dirfile standard as a uniform intermediate data format, a variety of front end programs provide access to different components and views of the downlinked data products. This distributed architecture was demonstrated operating across multiple widely dispersed sites prior to and during the EBEX engineering flight.
△ Less
Submitted 5 July, 2010; v1 submitted 27 June, 2010;
originally announced June 2010.
-
ACTPol: A polarization-sensitive receiver for the Atacama Cosmology Telescope
Authors:
M. D. Niemack,
P. A. R. Ade,
J. Aguirre,
F. Barrientos,
J. A. Beall,
J. R. Bond,
J. Britton,
H. M. Cho,
S. Das,
M. J. Devlin,
S. Dicker,
J. Dunkley,
R. Dunner,
J. W. Fowler,
A. Hajian,
M. Halpern,
M. Hasselfield,
G. C. Hilton,
M. Hilton,
J. Hubmayr,
J. P. Hughes,
L. Infante,
K. D. Irwin,
N. Jarosik,
J. Klein
, et al. (17 additional authors not shown)
Abstract:
The six-meter Atacama Cosmology Telescope (ACT) in Chile was built to measure the cosmic microwave background (CMB) at arcminute angular scales. We are building a new polarization sensitive receiver for ACT (ACTPol). ACTPol will characterize the gravitational lensing of the CMB and aims to constrain the sum of the neutrino masses with ~0.05 eV precision, the running of the spectral index of inflat…
▽ More
The six-meter Atacama Cosmology Telescope (ACT) in Chile was built to measure the cosmic microwave background (CMB) at arcminute angular scales. We are building a new polarization sensitive receiver for ACT (ACTPol). ACTPol will characterize the gravitational lensing of the CMB and aims to constrain the sum of the neutrino masses with ~0.05 eV precision, the running of the spectral index of inflation-induced fluctuations, and the primordial helium abundance to better than 1%. Our observing fields will overlap with the SDSS BOSS survey at optical wavelengths, enabling a variety of cross-correlation science, including studies of the growth of cosmic structure from Sunyaev-Zel'dovich observations of clusters of galaxies as well as independent constraints on the sum of the neutrino masses. We describe the science objectives and the initial receiver design.
△ Less
Submitted 25 June, 2010;
originally announced June 2010.
-
The EBEX Cryostat and Supporting Electronics
Authors:
Ilan Sagiv,
Asad M. Aboobaker,
Chaoyun Bao,
Shaul Hanany,
Terry Jones,
Jeffrey Klein,
Michael Milligan,
Daniel E. Polsgrove,
Kate Raach,
Kyle Zilic,
Andrei Korotkov,
Gregory S. Tucker,
Yuri Vinukurov,
Tomotake Matsumura,
Peter Ade,
Will Grainger,
Enzo Pascale,
Daniel Chapman,
Joy Didier,
Seth Hillbrand,
Britt Reichborn-Kjennerud,
Michele Limon,
Amber Miller,
Andrew Jaffe,
Amit Yadav
, et al. (19 additional authors not shown)
Abstract:
We describe the cryostat and supporting electronics for the EBEX experiment. EBEX is a balloon-borne polarimeter designed to measure the B-mode polarization of the cosmic microwave background radiation. The instrument includes a 1.5 meter Gregorian-type telescope and 1432 bolometric transition edge sensor detectors operating at 0.3 K. Electronics for monitoring temperatures and controlling cryosta…
▽ More
We describe the cryostat and supporting electronics for the EBEX experiment. EBEX is a balloon-borne polarimeter designed to measure the B-mode polarization of the cosmic microwave background radiation. The instrument includes a 1.5 meter Gregorian-type telescope and 1432 bolometric transition edge sensor detectors operating at 0.3 K. Electronics for monitoring temperatures and controlling cryostat refrigerators is read out over CANbus. A timing system ensures the data from all subsystems is accurately synchronized. EBEX completed an engineering test flight in June 2009 during which the cryogenics and supporting electronics performed according to predictions. The temperatures of the cryostat were stable, and an analysis of a subset of the data finds no scan synchronous signal in the cryostat temperatures. Preparations are underway for an Antarctic flight.
△ Less
Submitted 18 May, 2010;
originally announced May 2010.
-
Tuning of Kilopixel Transition Edge Sensor Bolometer Arrays with a Digital Frequency Multiplexed Readout System
Authors:
K. MacDermid,
P. Hyland,
F. Aubin,
E. Bissonnette,
M. Dobbs,
J. Hubmayr,
G. Smecher,
S. Warraich
Abstract:
A digital frequency multiplexing (DfMUX) system has been developed and used to tune large arrays of transition edge sensor (TES) bolometers read out with SQUID arrays for mm-wavelength cosmology telescopes. The DfMUX system multiplexes the input bias voltages and output currents for several bolometers on a single set of cryogenic wires. Multiplexing reduces the heat load on the camera's sub-Kelv…
▽ More
A digital frequency multiplexing (DfMUX) system has been developed and used to tune large arrays of transition edge sensor (TES) bolometers read out with SQUID arrays for mm-wavelength cosmology telescopes. The DfMUX system multiplexes the input bias voltages and output currents for several bolometers on a single set of cryogenic wires. Multiplexing reduces the heat load on the camera's sub-Kelvin cryogenic detector stage. In this paper we describe the algorithms and software used to set up and optimize the operation of the bolometric camera. The algorithms are implemented on soft processors embedded within FPGA devices operating on each backend readout board. The result is a fully parallelized implementation for which the setup time is independent of the array size.
△ Less
Submitted 23 November, 2009;
originally announced November 2009.
-
Design and characterization of TES bolometers and SQUID readout electronics for a balloon-borne application
Authors:
Johannes Hubmayr,
Francois Aubin,
Eric Bissonnette,
Matt Dobbs,
Shaul Hanany,
Adrian T. Lee,
Kevin MacDermid,
Xiaofan Meng,
Ilan Sagiv,
Graeme Smecher
Abstract:
We present measurements of the electrical and thermal properties of new arrays of bolometeric detectors that were fabricated as part of a program to develop bolometers optimized for the low photon background of the EBEX balloon-borne experiment. An array consists of 140 spider-web transition edge sensor bolometers microfabricated on a 4" diameter silicon wafer. The designed average thermal condu…
▽ More
We present measurements of the electrical and thermal properties of new arrays of bolometeric detectors that were fabricated as part of a program to develop bolometers optimized for the low photon background of the EBEX balloon-borne experiment. An array consists of 140 spider-web transition edge sensor bolometers microfabricated on a 4" diameter silicon wafer. The designed average thermal conductance of bolometers on a proto-type array is 32 pW/K, and measurements are in good agreement with this value. The measurements are taken with newly developed, digital frequency domain multiplexer SQUID readout electronics.
△ Less
Submitted 13 August, 2009;
originally announced August 2009.
-
Observing the Evolution of the Universe
Authors:
James Aguirre,
Alexandre Amblard,
Amjad Ashoorioon,
Carlo Baccigalupi,
Amedeo Balbi,
James Bartlett,
Nicola Bartolo,
Dominic Benford,
Mark Birkinshaw,
Jamie Bock,
Dick Bond,
Julian Borrill,
Franois Bouchet,
Michael Bridges,
Emory Bunn,
Erminia Calabrese,
Christopher Cantalupo,
Ana Caramete,
Carmelita Carbone,
Suchetana Chatterjee,
Sarah Church,
David Chuss,
Carlo Contaldi,
Asantha Cooray,
Sudeep Das
, et al. (150 additional authors not shown)
Abstract:
How did the universe evolve? The fine angular scale (l>1000) temperature and polarization anisotropies in the CMB are a Rosetta stone for understanding the evolution of the universe. Through detailed measurements one may address everything from the physics of the birth of the universe to the history of star formation and the process by which galaxies formed. One may in addition track the evoluti…
▽ More
How did the universe evolve? The fine angular scale (l>1000) temperature and polarization anisotropies in the CMB are a Rosetta stone for understanding the evolution of the universe. Through detailed measurements one may address everything from the physics of the birth of the universe to the history of star formation and the process by which galaxies formed. One may in addition track the evolution of the dark energy and discover the net neutrino mass.
We are at the dawn of a new era in which hundreds of square degrees of sky can be mapped with arcminute resolution and sensitivities measured in microKelvin. Acquiring these data requires the use of special purpose telescopes such as the Atacama Cosmology Telescope (ACT), located in Chile, and the South Pole Telescope (SPT). These new telescopes are outfitted with a new generation of custom mm-wave kilo-pixel arrays. Additional instruments are in the planning stages.
△ Less
Submitted 4 March, 2009;
originally announced March 2009.
-
A Millimeter-Wave Achromatic Half Wave Plate
Authors:
S. Hanany,
J. Hubmayr,
B. R. Johnson,
T. Matsumura,
P. Oxley,
M. Thibodeau
Abstract:
We have constructed an achromatic half wave plate (AHWP) suitable for the millimeter wavelength band. The AHWP was made from a stack of three sapphire a-cut birefringent plates with the optical axes of the middle plate rotated by 50.5 degrees with respect to the aligned axes of the other plates. The measured modulation efficiency of the AHWP at 110 GHz was $96 \pm 1.5$%. In contrast, the modulat…
▽ More
We have constructed an achromatic half wave plate (AHWP) suitable for the millimeter wavelength band. The AHWP was made from a stack of three sapphire a-cut birefringent plates with the optical axes of the middle plate rotated by 50.5 degrees with respect to the aligned axes of the other plates. The measured modulation efficiency of the AHWP at 110 GHz was $96 \pm 1.5$%. In contrast, the modulation efficiency of a single sapphire plate of the same thickness was $43 \pm 4$%. Both results are in close agreement with theoretical predictions. The modulation efficiency of the AHWP was constant as a function of incidence angles between 0 and 15 degrees. We discuss design parameters of an AHWP in the context of astrophysical broad band polarimetry at the millimeter wavelength band.
△ Less
Submitted 15 March, 2005;
originally announced March 2005.