Showing 1–22 of 22 results for author: Hubert, J

A metric learning approach for endoscopic kidney stone identification

Authors: Jorge Gonzalez-Zapata, Francisco Lopez-Tiro, Elias Villalvazo-Avila, Daniel Flores-Araiza, Jacques Hubert, Andres Mendez-Vazquez, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: Several Deep Learning (DL) methods have recently been proposed for an automated identification of kidney stones during an ureteroscopy to enable rapid therapeutic decisions. Even if these DL approaches led to promising results, they are mainly appropriate for kidney stone types for which numerous labelled data are available. However, only few labelled images are available for some rare kidney ston… ▽ More Several Deep Learning (DL) methods have recently been proposed for an automated identification of kidney stones during an ureteroscopy to enable rapid therapeutic decisions. Even if these DL approaches led to promising results, they are mainly appropriate for kidney stone types for which numerous labelled data are available. However, only few labelled images are available for some rare kidney stone types. This contribution exploits Deep Metric Learning (DML) methods i) to handle such classes with few samples, ii) to generalize well to out of distribution samples, and iii) to cope better with new classes which are added to the database. The proposed Guided Deep Metric Learning approach is based on a novel architecture which was designed to learn data representations in an improved way. The solution was inspired by Few-Shot Learning (FSL) and makes use of a teacher-student approach. The teacher model (GEMINI) generates a reduced hypothesis space based on prior knowledge from the labeled data, and is used it as a guide to a student model (i.e., ResNet50) through a Knowledge Distillation scheme. Extensive tests were first performed on two datasets separately used for the recognition, namely a set of images acquired for the surfaces of the kidney stone fragments, and a set of images of the fragment sections. The proposed DML-approach improved the identification accuracy by 10% and 12% in comparison to DL-methods and other DML-approaches, respectively. Moreover, model embeddings from the two dataset types were merged in an organized way through a multi-view scheme to simultaneously exploit the information of surface and section fragments. Test with the resulting mixed model improves the identification accuracy by at least 3% and up to 30% with respect to DL-models and shallow machine learning methods, respectively. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Deep Prototypical-Parts Ease Morphological Kidney Stone Identification and are Competitively Robust to Photometric Perturbations

Authors: Daniel Flores-Araiza, Francisco Lopez-Tiro, Jonathan El-Beze, Jacques Hubert, Miguel Gonzalez-Mendoza, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: Identifying the type of kidney stones can allow urologists to determine their cause of formation, improving the prescription of appropriate treatments to diminish future relapses. Currently, the associated ex-vivo diagnosis (known as Morpho-constitutional Analysis, MCA) is time-consuming, expensive and requires a great deal of experience, as it requires a visual analysis component that is highly o… ▽ More Identifying the type of kidney stones can allow urologists to determine their cause of formation, improving the prescription of appropriate treatments to diminish future relapses. Currently, the associated ex-vivo diagnosis (known as Morpho-constitutional Analysis, MCA) is time-consuming, expensive and requires a great deal of experience, as it requires a visual analysis component that is highly operator dependant. Recently, machine learning methods have been developed for in-vivo endoscopic stone recognition. Deep Learning (DL) based methods outperform non-DL methods in terms of accuracy but lack explainability. Despite this trade-off, when it comes to making high-stakes decisions, it's important to prioritize understandable Computer-Aided Diagnosis (CADx) that suggests a course of action based on reasonable evidence, rather than a model prescribing a course of action. In this proposal, we learn Prototypical Parts (PPs) per kidney stone subtype, which are used by the DL model to generate an output classification. Using PPs in the classification task enables case-based reasoning explanations for such output, thus making the model interpretable. In addition, we modify global visual characteristics to describe their relevance to the PPs and the sensitivity of our model's performance. With this, we provide explanations with additional information at the sample, class and model levels in contrast to previous works. Although our implementation's average accuracy is lower than state-of-the-art (SOTA) non-interpretable DL models by 1.5 %, our models perform 2.8% better on perturbed images with a lower standard deviation, without adversarial training. Thus, Learning PPs has the potential to create more robust DL models. △ Less

Submitted 8 April, 2023; originally announced April 2023.

Comments: This paper has been accepted at the LatinX in Computer Vision Research Workshop at CVPR2023 as a full paper and it will appear on the CVPR proceedings

Improving automatic endoscopic stone recognition using a multi-view fusion approach enhanced with two-step transfer learning

Authors: Francisco Lopez-Tiro, Elias Villalvazo-Avila, Juan Pablo Betancur-Rengifo, Ivan Reyes-Amezcua, Jacques Hubert, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: This contribution presents a deep-learning method for extracting and fusing image information acquired from different viewpoints, with the aim to produce more discriminant object features for the identification of the type of kidney stones seen in endoscopic images. The model was further improved with a two-step transfer learning approach and by attention blocks to refine the learned feature maps.… ▽ More This contribution presents a deep-learning method for extracting and fusing image information acquired from different viewpoints, with the aim to produce more discriminant object features for the identification of the type of kidney stones seen in endoscopic images. The model was further improved with a two-step transfer learning approach and by attention blocks to refine the learned feature maps. Deep feature fusion strategies improved the results of single view extraction backbone models by more than 6% in terms of accuracy of the kidney stones classification. △ Less

Submitted 22 August, 2023; v1 submitted 6 April, 2023; originally announced April 2023.

Comments: This paper has been accepted at the LatinX in Computer Vision (LXCV) Research workshop at ICCV 2023 (Paris, France)

Improved Kidney Stone Recognition Through Attention and Multi-View Feature Fusion Strategies

Authors: Elias Villalvazo-Avila, Francisco Lopez-Tiro, Jonathan El-Beze, Jacques Hubert, Miguel Gonzalez-Mendoza, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: This contribution presents a deep learning method for the extraction and fusion of information relating to kidney stone fragments acquired from different viewpoints of the endoscope. Surface and section fragment images are jointly used during the training of the classifier to improve the discrimination power of the features by adding attention layers at the end of each convolutional block. This ap… ▽ More This contribution presents a deep learning method for the extraction and fusion of information relating to kidney stone fragments acquired from different viewpoints of the endoscope. Surface and section fragment images are jointly used during the training of the classifier to improve the discrimination power of the features by adding attention layers at the end of each convolutional block. This approach is specifically designed to mimic the morpho-constitutional analysis performed in ex-vivo by biologists to visually identify kidney stones by inspecting both views. The addition of attention mechanisms to the backbone improved the results of single view extraction backbones by 4% on average. Moreover, in comparison to the state-of-the-art, the fusion of the deep features improved the overall results up to 11% in terms of kidney stone classification accuracy. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Boosting Kidney Stone Identification in Endoscopic Images Using Two-Step Transfer Learning

Authors: Francisco Lopez-Tiro, Juan Pablo Betancur-Rengifo, Arturo Ruiz-Sanchez, Ivan Reyes-Amezcua, Jonathan El-Beze, Jacques Hubert, Michel Daudon, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: Knowing the cause of kidney stone formation is crucial to establish treatments that prevent recurrence. There are currently different approaches for determining the kidney stone type. However, the reference ex-vivo identification procedure can take up to several weeks, while an in-vivo visual recognition requires highly trained specialists. Machine learning models have been developed to provide ur… ▽ More Knowing the cause of kidney stone formation is crucial to establish treatments that prevent recurrence. There are currently different approaches for determining the kidney stone type. However, the reference ex-vivo identification procedure can take up to several weeks, while an in-vivo visual recognition requires highly trained specialists. Machine learning models have been developed to provide urologists with an automated classification of kidney stones during an ureteroscopy; however, there is a general lack in terms of quality of the training data and methods. In this work, a two-step transfer learning approach is used to train the kidney stone classifier. The proposed approach transfers knowledge learned on a set of images of kidney stones acquired with a CCD camera (ex-vivo dataset) to a final model that classifies images from endoscopic images (ex-vivo dataset). The results show that learning features from different domains with similar information helps to improve the performance of a model that performs classification in real conditions (for instance, uncontrolled lighting conditions and blur). Finally, in comparison to models that are trained from scratch or by initializing ImageNet weights, the obtained results suggest that the two-step approach extracts features improving the identification of kidney stones in endoscopic images. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Interpretable Deep Learning Classifier by Detection of Prototypical Parts on Kidney Stones Images

Authors: Daniel Flores-Araiza, Francisco Lopez-Tiro, Elias Villalvazo-Avila, Jonathan El-Beze, Jacques Hubert, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: Identifying the type of kidney stones can allow urologists to determine their formation cause, improving the early prescription of appropriate treatments to diminish future relapses. However, currently, the associated ex-vivo diagnosis (known as morpho-constitutional analysis, MCA) is time-consuming, expensive, and requires a great deal of experience, as it requires a visual analysis component tha… ▽ More Identifying the type of kidney stones can allow urologists to determine their formation cause, improving the early prescription of appropriate treatments to diminish future relapses. However, currently, the associated ex-vivo diagnosis (known as morpho-constitutional analysis, MCA) is time-consuming, expensive, and requires a great deal of experience, as it requires a visual analysis component that is highly operator dependant. Recently, machine learning methods have been developed for in-vivo endoscopic stone recognition. Shallow methods have been demonstrated to be reliable and interpretable but exhibit low accuracy, while deep learning-based methods yield high accuracy but are not explainable. However, high stake decisions require understandable computer-aided diagnosis (CAD) to suggest a course of action based on reasonable evidence, rather than merely prescribe one. Herein, we investigate means for learning part-prototypes (PPs) that enable interpretable models. Our proposal suggests a classification for a kidney stone patch image and provides explanations in a similar way as those used on the MCA method. △ Less

Submitted 1 June, 2022; v1 submitted 1 June, 2022; originally announced June 2022.

Comments: Extended abstract accepted at LatinX in Computer Vision Research Workshop, at CVPR 2022

Comparing feature fusion strategies for Deep Learning-based kidney stone identification

Authors: Elias Villalvazo-Avila, Francisco Lopez-Tiro, Daniel Flores-Araiza, Gilberto Ochoa-Ruiz, Jonathan El-Beze, Jacques Hubert, Christian Daul

Abstract: This contribution presents a deep-learning method for extracting and fusing image information acquired from different viewpoints with the aim to produce more discriminant object features. Our approach was specifically designed to mimic the morpho-constitutional analysis used by urologists to visually classify kidney stones by inspecting the sections and surfaces of their fragments. Deep feature fu… ▽ More This contribution presents a deep-learning method for extracting and fusing image information acquired from different viewpoints with the aim to produce more discriminant object features. Our approach was specifically designed to mimic the morpho-constitutional analysis used by urologists to visually classify kidney stones by inspecting the sections and surfaces of their fragments. Deep feature fusion strategies improved the results of single view extraction backbone models by more than 10\% in terms of precision of the kidney stones classification. △ Less

Submitted 31 May, 2022; originally announced June 2022.

Comments: 4 pages, 3 figures, XXVIIIème Colloque Francophone de Traitement du Signal et des Images

On the generalization capabilities of FSL methods through domain adaptation: a case study in endoscopic kidney stone image classification

Authors: Mauricio Mendez-Ruiz, Francisco Lopez-Tiro, Jonathan El-Beze, Vincent Estrade, Gilberto Ochoa-Ruiz1, Jacques Hubert, Andres Mendez-Vazquez, Christian Daul

Abstract: Deep learning has shown great promise in diverse areas of computer vision, such as image classification, object detection and semantic segmentation, among many others. However, as it has been repeatedly demonstrated, deep learning methods trained on a dataset do not generalize well to datasets from other domains or even to similar datasets, due to data distribution shifts. In this work, we propose… ▽ More Deep learning has shown great promise in diverse areas of computer vision, such as image classification, object detection and semantic segmentation, among many others. However, as it has been repeatedly demonstrated, deep learning methods trained on a dataset do not generalize well to datasets from other domains or even to similar datasets, due to data distribution shifts. In this work, we propose the use of a meta-learning based few-shot learning approach to alleviate these problems. In order to demonstrate its efficacy, we use two datasets of kidney stones samples acquired with different endoscopes and different acquisition conditions. The results show how such methods are indeed capable of handling domain-shifts by attaining an accuracy of 74.38% and 88.52% in the 5-way 5-shot and 5-way 20-shot settings respectively. Instead, in the same dataset, traditional Deep Learning (DL) methods attain only an accuracy of 45%. △ Less

Submitted 2 May, 2022; originally announced May 2022.

Comments: Paper submitted to MICAI 2022

On the in vivo recognition of kidney stones using machine learning

Authors: Francisco Lopez-Tiro, Vincent Estrade, Jacques Hubert, Daniel Flores-Araiza, Miguel Gonzalez-Mendoza, Gilberto Ochoa-Ruiz, Christian Daul

Abstract: Determining the type of kidney stones allows urologists to prescribe a treatment to avoid recurrence of renal lithiasis. An automated in-vivo image-based classification method would be an important step towards an immediate identification of the kidney stone type required as a first phase of the diagnosis. In the literature it was shown on ex-vivo data (i.e., in very controlled scene and image acq… ▽ More Determining the type of kidney stones allows urologists to prescribe a treatment to avoid recurrence of renal lithiasis. An automated in-vivo image-based classification method would be an important step towards an immediate identification of the kidney stone type required as a first phase of the diagnosis. In the literature it was shown on ex-vivo data (i.e., in very controlled scene and image acquisition conditions) that an automated kidney stone classification is indeed feasible. This pilot study compares the kidney stone recognition performances of six shallow machine learning methods and three deep-learning architectures which were tested with in-vivo images of the four most frequent urinary calculi types acquired with an endoscope during standard ureteroscopies. This contribution details the database construction and the design of the tested kidney stones classifiers. Even if the best results were obtained by the Inception v3 architecture (weighted precision, recall and F1-score of 0.97, 0.98 and 0.97, respectively), it is also shown that choosing an appropriate colour space and texture features allows a shallow machine learning method to approach closely the performances of the most promising deep-learning methods (the XGBoost classifier led to weighted precision, recall and F1-score values of 0.96). This paper is the first one that explores the most discriminant features to be extracted from images acquired during ureteroscopies. △ Less

Submitted 24 August, 2023; v1 submitted 21 January, 2022; originally announced January 2022.

Comments: Paper submitted to IEEE Access

Decaying Dark Matter: Simulations and Weak-Lensing Forecast

Authors: Jonathan Hubert, Aurel Schneider, Doug Potter, Joachim Stadel, Sambit K. Giri

Abstract: Despite evidence for the existence of dark matter (DM) from very high and low redshifts, a moderate amount of DM particle decay remains a valid possibility. This includes both models with very long-lived yet unstable particles or mixed scenarios where only a small fraction of dark matter is allowed to decay. In this paper, we investigate how DM particles decaying into radiation affect non-linear s… ▽ More Despite evidence for the existence of dark matter (DM) from very high and low redshifts, a moderate amount of DM particle decay remains a valid possibility. This includes both models with very long-lived yet unstable particles or mixed scenarios where only a small fraction of dark matter is allowed to decay. In this paper, we investigate how DM particles decaying into radiation affect non-linear structure formation. We look at the power spectrum and its redshift evolution, varying both the decay lifetime ($τ$) and the fraction of decaying-to-total dark matter ($f$), and we propose a fitting function that reaches sub-percent precision below $k\sim10$ h/Mpc. Based on this fit, we perform a forecast analysis for a Euclid-like weak lensing (WL) survey, including both massive neutrino and baryonic feedback parameters. We find that with WL observations alone, it is possible to rule out decay lifetimes smaller than $τ=75$ Gyr (at 95 percent CL) for the case that all DM is unstable. This constraint improves to $τ=182$ Gyr if the WL data is combined with CMB priors from the Planck satellite and to $τ=275$ Gyr if we further assume baryonic feedback to be fully constrained by upcoming Sunyaev-Zeldovich or X-ray data. The latter shows a factor of 3.2 improvement compared to constraints from CMB data alone. Regarding the scenario of a strongly decaying sub-component of dark matter with $τ\sim 30$ Gyr or lower, it will be possible to rule out a decaying-to-total fraction of $f>0.49$, $f>0.21$, and $f>0.13$ (at the 95 percent CL) for the same three scenarios. We conclude that the upcoming stage-IV WL surveys will allow us to significantly improve current constraints on the stability of the dark matter sector. △ Less

Submitted 8 September, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Comments: matching accepted version

Assessing deep learning methods for the identification of kidney stones in endoscopic images

Authors: Francisco Lopez, Andres Varela, Oscar Hinojosa, Mauricio Mendez, Dinh-Hoan Trinh, Jonathan ElBeze, Jacques Hubert, Vincent Estrade, Miguel Gonzalez, Gilberto Ochoa, Christian Daul

Abstract: Knowing the type (i.e., the biochemical composition) of kidney stones is crucial to prevent relapses with an appropriate treatment. During ureteroscopies, kidney stones are fragmented, extracted from the urinary tract, and their composition is determined using a morpho-constitutional analysis. This procedure is time consuming (the morpho-constitutional analysis results are only available after som… ▽ More Knowing the type (i.e., the biochemical composition) of kidney stones is crucial to prevent relapses with an appropriate treatment. During ureteroscopies, kidney stones are fragmented, extracted from the urinary tract, and their composition is determined using a morpho-constitutional analysis. This procedure is time consuming (the morpho-constitutional analysis results are only available after some days) and tedious (the fragment extraction lasts up to an hour). Identifying the kidney stone type only with the in-vivo endoscopic images would allow for the dusting of the fragments, while the morpho-constitutional analysis could be avoided. Only few contributions dealing with the in vivo identification of kidney stones were published. This paper discusses and compares five classification methods including deep convolutional neural networks (DCNN)-based approaches and traditional (non DCNN-based) ones. Even if the best method is a DCCN approach with a precision and recall of 98% and 97% over four classes, this contribution shows that a XGBoost classifier exploiting well-chosen feature vectors can closely approach the performances of DCNN classifiers for a medical application with a limited number of annotated data. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Comments: This paper is currently under review for the IEEE Engineering in Medicine and Biology Conference (EMBC 2021)

Unidentified Floating Object detection in maritime environment using dictionary learning

Authors: Darshan Venkatrayappa, Agnès Desolneux, Jean-Michel Hubert, Josselin Manceau

Abstract: Maritime domain is one of the most challenging scenarios for object detection due to the complexity of the observed scene. In this article, we present a new approach to detect unidentified floating objects in the maritime environment. The proposed approach is capable of detecting floating objects without any prior knowledge of their visual appearance, shape or location. The input image from the vi… ▽ More Maritime domain is one of the most challenging scenarios for object detection due to the complexity of the observed scene. In this article, we present a new approach to detect unidentified floating objects in the maritime environment. The proposed approach is capable of detecting floating objects without any prior knowledge of their visual appearance, shape or location. The input image from the video stream is denoised using a visual dictionary learned from a K-SVD algorithm. The denoised image is made of self-similar content. Later, we extract the residual image, which is the difference between the original image and the denoised (self-similar) image. Thus, the residual image contains noise and salient structures (objects). These salient structures can be extracted using an a contrario model. We demonstrate the capabilities of our algorithm by testing it on videos exhibiting varying maritime scenarios. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: 9 pages, 6 figures

Synthesis of Membrane-Electrode Assembly for Fuel Cells by Means of (Sub)-Atmospheric Plasma Processes

Authors: Delphine Merche, Thierry Dufour, Julie Hubert, Claude Poleunis, Sami Yunus, Arnaud Delcorte, Patrick Bertrand, Francois Reniers

Abstract: An easy procedure to build up membrane-electrode assemblies for applications dedicated to miniaturized PEMFC using H2 or CH3OH by a two-steps atmospheric plasma process is reported. Firstly, catalyst nanoparticles are grafted on carbon substrates by spraying a Pt colloidal solution in the post-discharge of an RF atmospheric plasma torch. In the second step, the resulting decorated electrodes are c… ▽ More An easy procedure to build up membrane-electrode assemblies for applications dedicated to miniaturized PEMFC using H2 or CH3OH by a two-steps atmospheric plasma process is reported. Firstly, catalyst nanoparticles are grafted on carbon substrates by spraying a Pt colloidal solution in the post-discharge of an RF atmospheric plasma torch. In the second step, the resulting decorated electrodes are covered by plasma synthesized polymeric membranes in the discharge of a DBD. The sulfonated polystyrene membranes are synthesized by injecting simultaneously styrene and trifluoromethanesulfonic acid monomers, in the presence of a carrier gas (Ar or He). The membranes are chemically characterized by XPS, ToF-SIMS, and FTIR (IRRAS) and their deposition rate is investigated by SEM. △ Less

Submitted 6 February, 2018; originally announced February 2018.

Comments: 14 pages, 11 figures

Journal ref: Plasma Processes & Polymers, 2012, Vol. 9, Issue 11-12, 1144-1153

PTFE surface etching in the post-discharge of a RF scanning plasma torch: evidence of ejected fluorinated species

Authors: Thierry Dufour, Julie Hubert, Pascal Viville, Corinne Y. Duluard, Simon Desbief, Roberto Lazzaroni, François Reniers

Abstract: The texturization of poly(tetrafluoroethylene) (PTFE) surfaces is achieved at atmospheric pressure by using the post-discharge of a radio-frequency plasma torch supplied in helium and oxygen gases. The surface properties are characterized by contact angle measurement, X-ray photoelectron spectroscopy and atomic force microscopy. We show that the plasma treatment increases the surface hydrophobicit… ▽ More The texturization of poly(tetrafluoroethylene) (PTFE) surfaces is achieved at atmospheric pressure by using the post-discharge of a radio-frequency plasma torch supplied in helium and oxygen gases. The surface properties are characterized by contact angle measurement, X-ray photoelectron spectroscopy and atomic force microscopy. We show that the plasma treatment increases the surface hydrophobicity (with water contact angles increasing from 115 to 155°) only by modifying the PTFE surface morphology and not the stoichiometry. Measurements of sample mass losses correlated to the ejection of CF$_2$ fragments from the PTFE surface evidenced an etching mechanism at atmospheric pressure. △ Less

Submitted 2 May, 2016; originally announced November 2016.

Journal ref: Plasma Processes and Polymers, 2012, Vol. 9, Issue 8, 820-829

Competitive and synergistic effects between excimer VUV radiation and O radicals on the etching mechanisms of polyethylene and fluoropolymer surfaces treated by atmospheric He-O$_2$ post-discharge

Authors: Thierry Dufour, Julie Hubert, Nicolas Vandencasteele, Pascal Viville, Roberto Lazzaroni, François Reniers

Abstract: Among various surface modification techniques, plasma can be used as a source for tailoring the surface properties of diverse materials. HDPE and fluoropolymer surfaces have been treated by the post-discharge of an atmospheric RF-plasma torch supplied with helium and oxygen gases. The plasma-treated surfaces were characterized by measurements of mass losses, water contact angles, x-ray photoelectr… ▽ More Among various surface modification techniques, plasma can be used as a source for tailoring the surface properties of diverse materials. HDPE and fluoropolymer surfaces have been treated by the post-discharge of an atmospheric RF-plasma torch supplied with helium and oxygen gases. The plasma-treated surfaces were characterized by measurements of mass losses, water contact angles, x-ray photoelectron spectroscopy and atomic force microscopy. This experimental approach correlated with an optical characterization of the plasma phase allowed us to propose etching mechanisms occurring at the post-discharge/polymer interface. We discuss how competitive and synergistic effects can result from the oxidation and/or the roughening of the surface but also from the excimer VUV radiation, the He metastable species and the O radicals reaching the plasma-polymer interface. △ Less

Submitted 2 May, 2016; originally announced May 2016.

Journal ref: J. Phys. D: Appl. Phys., 2013, Vol. 46, Issue 31, 315203 (14 pp)

Optical diagnostics and mass spectrometry on the afterglow of an atmospheric pressure Ar/O$_2$ radiofrequency plasma used for polymer surface treatment

Authors: Corinne Y. Duluard, Thierry Dufour, Julie Hubert, François Reniers

Abstract: In the context of polymer surface treatment, the afterglow of an atmospheric pressure Ar/O$_2$ radiofrequency plasma is characterized by optical emission spectroscopy, laser induced fluorescence and mass spectrometry. The influence of the O$_2$ gas flow rate and the source power on the plasma properties (gas temperature, Ar excitation temperature, relative concentrations of O atoms and OH radicals… ▽ More In the context of polymer surface treatment, the afterglow of an atmospheric pressure Ar/O$_2$ radiofrequency plasma is characterized by optical emission spectroscopy, laser induced fluorescence and mass spectrometry. The influence of the O$_2$ gas flow rate and the source power on the plasma properties (gas temperature, Ar excitation temperature, relative concentrations of O atoms and OH radicals) are evaluated. We show that for plasma torch-to-substrate distances lower than 6 mm, the afterglow creates a protective atmosphere, thus the plasma gas composition interacting with the substrate is well controlled. For higher distances, the influence of ambient air can no longer be neglected and gradients in Ar, O$_2$ and N$_2$ concentrations are measured as a function of axial and vertical position. △ Less

Submitted 2 May, 2016; originally announced May 2016.

Comments: http://mpserver.pst.qub.ac.uk/sites/icpig2011/301_C10_Duluard.pdf, 30th-ICPIG, Belfast, Northern Ireland, 28th August-2nd September 2011, C10

Chemical mechanisms inducing a dc current measured in the flowing post-discharge of an RF He-O2 plasma torch

Authors: Thierry Dufour, J Hubert, N Vandencasteele, F Reniers

Abstract: The post-discharge of an RF plasma torch supplied with helium and oxygen gases is characterized by mass spectrometry, optical emission spectroscopy and electrical measurements. We have proved the existence of a dc current in the post-discharge (1--20 A), attributed to the Penning ionization of atmospheric nitrogen and oxygenated species. The mechanisms ruling this dc current are investigated throu… ▽ More The post-discharge of an RF plasma torch supplied with helium and oxygen gases is characterized by mass spectrometry, optical emission spectroscopy and electrical measurements. We have proved the existence of a dc current in the post-discharge (1--20 A), attributed to the Penning ionization of atmospheric nitrogen and oxygenated species. The mechanisms ruling this dc current are investigated through experiments in which we discuss the influence of the O2 flow rate, the He flow rate and the distance separating the plasma torch from a material surface located downstream. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Journal ref: Plasma Sources Science and Technology, IOP Publishing, 2012, 21, 045013 (10pp)

Etching Processes of Polytetrafluoroethylene Surfaces Exposed to He and He-O2 Atmospheric Post-discharges

Authors: J Hubert, Thierry Dufour, Nicolas Vandencasteele, Simon Desbief, Roberto Lazzaroni, F Reniers

Abstract: A comparative study of polytetrafluoroethylene (PTFE) surfaces treated by the post-discharge of He and He-O2 plasmas at atmospheric pressure is presented. The characterization of treated PTFE surfaces and the species involved in the surface modification are related. In pure He plasmas, no significant change of the surface has been observed by X-ray photoelectron spectroscopy (XPS), dynamic water c… ▽ More A comparative study of polytetrafluoroethylene (PTFE) surfaces treated by the post-discharge of He and He-O2 plasmas at atmospheric pressure is presented. The characterization of treated PTFE surfaces and the species involved in the surface modification are related. In pure He plasmas, no significant change of the surface has been observed by X-ray photoelectron spectroscopy (XPS), dynamic water contact angles (dWCA) and atomic force microscopy (AFM), in spite of important mass losses recorded. According to these observations, a layer-by-layer physical etching without any preferential orientation is proposed, where the highly energetic helium metastables are the main species responsible for the scission of --(CF2)n-- chains. In He--O 2 plasmas, as the density of helium metastables decreases as a function of the oxygen flow rate, the treatment leads to fewer species ejected from the PTFE surfaces (in agreement with mass loss measurements and the detection of fluorinated species onto aluminum foil). However, the dWCA and AFM measurements show an increase in the hydrophobicity and the roughness of the surface. The observed alveolar structures are assumed to be caused by an anisotropic etching where the oxygen atoms etch mainly the amorphous phase. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Journal ref: Langmuir, American Chemical Society, 2012, 18 (25), pp.9466-9474

Chemical and Physical Effects of the Carrier Gas on the Atmospheric Pressure PECVD of Fluorinated Precursors

Authors: Julie Hubert, Nicolas Vandencasteele, Jérémy Mertens, Pascal Viville, Thierry Dufour, Cédric Barroo, Thierry Visart de Bocarmé, Roberto Lazzaroni, François Reniers

Abstract: The atmospheric pressure PECVD deposition and texturization of hydrophobic coatings using liquid fluorinated C6F12 and C6F14 precursors are investigated. The effect of the carrier gas (argon and helium) is discussed in terms of the behavior of the gas phase and of the characteristics of the deposited film. Mass spectrom-etry measurements indicate that the fragmentation is higher with argon while h… ▽ More The atmospheric pressure PECVD deposition and texturization of hydrophobic coatings using liquid fluorinated C6F12 and C6F14 precursors are investigated. The effect of the carrier gas (argon and helium) is discussed in terms of the behavior of the gas phase and of the characteristics of the deposited film. Mass spectrom-etry measurements indicate that the fragmentation is higher with argon while helium reacts very easily with oxygen impurities leading to the formation of CxFyOz compounds. These observations are consistent with the chemical composition of the films determined by XPS and the variation in the deposition rate. Moreover, the streamers present in the argon discharge affect the morphology of the surface by increasing the roughness, which leads to the increase in the hydrophobicity of the coatings. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Comments: arXiv admin note: text overlap with arXiv:1604.08752

Journal ref: Plasma Processes and Polymers, Wiley-VCH Verlag, 2015, 12 (10), pp.1174-1185

Influence of ambient air on the flowing afterglow of an atmospheric pressure Ar/O2 radiofrequency plasma

Authors: C. Y. Duluard, Thierry Dufour, J Hubert, F Reniers

Abstract: The influence of ambient air on the flowing afterglow of an atmospheric pressure Ar/O2 radiofrequency plasma has been investigated experimentally. Spatially resolved mass spectrometry and laser induced fluorescence on OH radicals were used to estimate the intrusion of air in between the plasma torch and the substrate as a function of the torch-to-substrate separation distance. No air is detected,… ▽ More The influence of ambient air on the flowing afterglow of an atmospheric pressure Ar/O2 radiofrequency plasma has been investigated experimentally. Spatially resolved mass spectrometry and laser induced fluorescence on OH radicals were used to estimate the intrusion of air in between the plasma torch and the substrate as a function of the torch-to-substrate separation distance. No air is detected, within the limits of measurement uncertainties, for separation distances smaller than 5 mm. For larger distances, the effect of ambient air can no longer be neglected, and radial gradients in the concentrations of species appear. The Ar 4p population, determined through absolute optical emission spectroscopy, is seen to decrease with separation distance, whereas a rise in emission from the N2(C--B) system is measured. The observed decay in Ar 4p and N2(C) populations for separation distances greater than 9mm is partly assigned to the increasing collisional quenching rate by N2 and O2 molecules from the entrained air. Absorption measurements also point to the formation of ozone at concentrations from 10^14 to 10^15 cm-3, depending both on the injected O2 flow rate and the torch-to-substrate separation distance. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Journal ref: Journal of Applied Physics, American Institute of Physics, 2013, 113 (9), pp.093303

Synthesis and texturization processes of (super)-hydrophobic fluorinated surfaces by atmospheric plasma

Authors: Julie Hubert, Jérémy Mertens, Thierry Dufour, Nicolas Vandencasteele, François Reniers, Pascal Viville, Roberto Lazzaroni, M Raes, Herman Terryn

Abstract: The synthesis and texturization processes of fluorinated surfaces by means of atmospheric plasma are investigated and presented through an integrated study of both the plasma phase and the resulting material surface. Three methods enhancing the surface hydrophobicity up to the production of super-hydrophobic surfaces are evaluated: (i) the modification of a polytetrafluoroethylene (PTFE) surface,… ▽ More The synthesis and texturization processes of fluorinated surfaces by means of atmospheric plasma are investigated and presented through an integrated study of both the plasma phase and the resulting material surface. Three methods enhancing the surface hydrophobicity up to the production of super-hydrophobic surfaces are evaluated: (i) the modification of a polytetrafluoroethylene (PTFE) surface, (ii) the plasma deposition of fluorinated coatings and (iii) the incorporation of nanoparticles into those fluorinated films. In all the approaches, the nature of the plasma gas appears to be a crucial parameter for the desired property. Although a higher etching of the PTFE surface can be obtained with a pure helium plasma, the texturization can only be created if O2 is added to the plasma, which simultaneously decreases the total etching. The deposition of CxFy films by a dielectric barrier discharge leads to hydrophobic coatings with water contact angles (WCAs) of 115{\textdegree}, but only the filamentary argon discharge induces higher WCAs. Finally, nanoparticles were deposited under the fluorinated layer to increase the surface roughness and therefore produce super-hydrophobic hybrid coatings characterized by the nonadherence of the water droplet at the surface. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Comments: arXiv admin note: text overlap with arXiv:1604.08801

Journal ref: Journal of Materials Research, Cambridge University Press (CUP), 2016, 30 (21), pp.3177-3191

Short-Term Memory Through Persistent Activity: Evolution of Self-Stop** and Self-Sustaining Activity in Spiking Neural Networks

Authors: Julien Hubert, Takashi Ikegami

Abstract: Memories in the brain are separated in two categories: short-term and long-term memories. Long-term memories remain for a lifetime, while short-term ones exist from a few milliseconds to a few minutes. Within short-term memory studies, there is debate about what neural structure could implement it. Indeed, mechanisms responsible for long-term memories appear inadequate for the task. Instead, it ha… ▽ More Memories in the brain are separated in two categories: short-term and long-term memories. Long-term memories remain for a lifetime, while short-term ones exist from a few milliseconds to a few minutes. Within short-term memory studies, there is debate about what neural structure could implement it. Indeed, mechanisms responsible for long-term memories appear inadequate for the task. Instead, it has been proposed that short-term memories could be sustained by the persistent activity of a group of neurons. In this work, we explore what topology could sustain short-term memories, not by designing a model from specific hypotheses, but through Darwinian evolution in order to obtain new insights into its implementation. We evolved 10 networks capable of retaining information for a fixed duration between 2 and 11s. Our main finding has been that the evolution naturally created two functional modules in the network: one which sustains the information containing primarily excitatory neurons, while the other, which is responsible for forgetting, was composed mainly of inhibitory neurons. This demonstrates how the balance between inhibition and excitation plays an important role in cognition. △ Less

Submitted 25 November, 2014; originally announced November 2014.

Comments: 28 pages