-
Magnetoelectric coupling in multiferroic CFO/BCTSn core shell nanofibers elaborated by co-axial electrospinning method
Authors:
Youness Hadouch,
Daoud Mezzane,
M'barek Amjoud,
Valentin Laguta,
Khalid Hoummada,
Voicu Octavian Dolocan,
Mustapha Jouiad,
Mohammed Lahcini,
Hana Ursic,
Nikola Novak,
Zdravko Kutnjak,
Yaovi Gagou,
Igor Lukyanchuk,
Mimoun El Marssi
Abstract:
Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel struct…
▽ More
Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel structure of CFO and the perovskite structure of BCTSn. The magnetic character of the resultant CFO@BCTSn NFs was determined by SQUID magnetometry. The piezoelectricity was verified using piezo-response force microscopy, which revealed an entirely covered ferroelectric shell outline, in accordance with SEM and TEM observations. The magnetoelectric (ME) coefficient was measured as a function of the applied external DC magnetic field. The maximum ME coefficient obtained for the CFO@BCTSn NFs was 346 mV cm-1 Oe-1. The high magnetoelectric coupling suggests that CFO@BCTSn NFs could be a promising candidate for magnetic field sensor and magnetoelectric device applications.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
Room-temperature magnetoelectric effect in lead-free multiferroic $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ particulate composites
Authors:
Youness Hadouch,
Daoud Mezzane,
M barek Amjoud,
Nouredine Oueldna,
Yaovi Gagou,
Zdravko Kutnjak,
Valentin Laguta,
Yakov Kopelevich,
Khalid Hoummada,
Mimoun El Marssi
Abstract:
Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) an…
▽ More
Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) and spinel CoFe$_2$O$_4$ (CFO) phases without the presence of additional phases. The morphological properties of the composites were provided by using Field Emission Scanning Electron Microscopy. The BCTSn-CFO composites exhibit multiferroic behavior at room temperature, as evidenced by ferroelectric and ferromagnetic hysteresis loops. The magnetoelectric (ME) coupling was measured under a magnetic field up to 10 kOe and the maximum ME response found to be 0.1 mV /cm/ Oe for the composition 0.7 BCTSn-0.3 CFO exhibiting a high degree of pseudo-cubicity and large density.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Enhanced electrocaloric and energy-storage properties of environment-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 ceramics
Authors:
Hajar Zaitouni,
Lahoucine Hajji,
Daoud Mezzane,
El Hassan Choukri,
Anna Razumnaya,
Yaovi Gagou,
Khalid Hoummada,
Abdelhadi Alimoussa,
Brigita Rozic,
Dejvid Cresnar,
Mimoun El Marssi,
Zdravko Kutnjak
Abstract:
The electrocaloric (EC) effect and energy storage properties of eco-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) ceramics prepared by the conventional solid-state reaction method were studied. Significant energy efficiency exceeding 80% was found in our samples. In particular, BSTS-5 and BSTS-10 samples exhibit 92% and 88% efficiency, respectively, over a wide temperature range around room…
▽ More
The electrocaloric (EC) effect and energy storage properties of eco-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) ceramics prepared by the conventional solid-state reaction method were studied. Significant energy efficiency exceeding 80% was found in our samples. In particular, BSTS-5 and BSTS-10 samples exhibit 92% and 88% efficiency, respectively, over a wide temperature range around room temperature (RT). Direct EC measurement and an indirect method based on the thermodynamic approach were used to characterize the EC effect, and both yielded consistent results. The largest electrocaloric responsivity of 0.73 K mm/kV was obtained for BSTS-0 at 368 K with an adiabatic temperature change DT(EC) of 0.55 K at a low applied electric field of only 7.4 kV/cm. With increasing Sn-content, the EC response of BSTS-x ceramics decreases, while their diffuseness increases over an extensive temperature range, centered at RT. A significant coefficient of performance (COP > 26) was found for our samples. The obtained results demonstrate the possibility of designing eco-friendly materials with higher EC effect and energy efficiency for potential solid-state refrigeration and energy storage devices.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
Strain engineering of the magnetic anisotropy and magnetic moment in NdFeO3 epitaxial thin films
Authors:
Mohamed Ali Khaled,
Juan Ruvalcaba,
Teodoro Cordova,
Donna C. Arnold,
Nicolas Jaouen,
Philippe Ohresser,
Mustapha Jouiad,
Khalid Hoummada,
Brahim Dkhil,
Mimoun EL Marssi,
Houssny Bouyanfif
Abstract:
Strain engineering is a powerful mean for tuning the various functionalities of ABO3 perovskite oxide thin films. Rare-earth orthoferrite RFeO3 materials such as NdFeO3 (NFO) are of prime interest because of their intriguing magnetic properties as well as their technological potential applications especially as thin films. Here, using a large set of complementary and advanced techniques, we show t…
▽ More
Strain engineering is a powerful mean for tuning the various functionalities of ABO3 perovskite oxide thin films. Rare-earth orthoferrite RFeO3 materials such as NdFeO3 (NFO) are of prime interest because of their intriguing magnetic properties as well as their technological potential applications especially as thin films. Here, using a large set of complementary and advanced techniques, we show that NFO epitaxial thin films, successfully grown by pulsed laser deposition on (001)-SrTiO3, show a strong magnetic anisotropy below a critical thickness tc of 54 nm, associated with the occurrence of structural modifications related to symmetry and domain pattern changes. By varying the tensile misfit strain through the decrease of film thickness below tc, the amplitudes of in and out-of-plane magnetization can be continuously tuned while their ratio stays constant. Furthermore, different low-temperature magnetic behaviors are evidenced for strained and relaxed films, suggesting that the strain-induced structural state impacts the magnetic phase stability.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Anti-polar state in BiFeO3/NdFeO3 superlattices
Authors:
Mohamed Ali Khaled,
Donna C Arnold,
Brahim Dkhil,
Mustapha Jouiad,
Khalid Hoummada,
Mimoun El Marssi,
Houssny Bouyanfif
Abstract:
Antiferroelectrics are promising materials for high energy density capacitors and the search for environmentally-friendly and efficient systems is actively pursued. An elegant strategy to create and design new (anti)ferroic system relies on the use of nanoscale superlattices. We report here the use of such strategy and the fabrication of nanoscale BiFeO3/NdFeO3 superlattices and in depth character…
▽ More
Antiferroelectrics are promising materials for high energy density capacitors and the search for environmentally-friendly and efficient systems is actively pursued. An elegant strategy to create and design new (anti)ferroic system relies on the use of nanoscale superlattices. We report here the use of such strategy and the fabrication of nanoscale BiFeO3/NdFeO3 superlattices and in depth characterization using high resolution X-ray diffraction and Transmission Electron Microscopy. The structural analysis at atomic scale demonstrates that such superlattices host anti-polar ordering most likely described by an antiferroelectric-like Pbnm symmetry. Temperature dependence of anti-polar state and structural transition further hint that the stability of the anti-polar state is controlled by the BiFeO3 layer thickness within the stacking and, in a more moderate way, by interlayer strain. Discovery of such polar arrangement in superlattices and the possible generalization to the whole rare-earth family pave the way to new platforms for energy storage application as well as nano-electronic devices.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Enhanced electrical and electrocaloric properties in lead-free Ba0.8Ca0.2ZrxTi1-xO3 (x = 0 and 0.02) ceramics
Authors:
Soukaina Merselmiz,
Zouhair Hanani,
Said Ben Moumen,
Aleksander Matavz,
Daoud Mezzane,
Nikola Novak,
Zahra Abkhar,
Lahoucine Hajji,
Mbarek Amjoud,
Yaovi Gagou,
Khalid Hoummada,
Dejvid Cresnar,
Zdravko Kutnjak,
Brigita Rozic
Abstract:
The effects of 2% Zr introduction in Ba0.8Ca0.2TiO3 (BCT) system on its electrical and the electrocaloric properties was investigated.
The effects of 2% Zr introduction in Ba0.8Ca0.2TiO3 (BCT) system on its electrical and the electrocaloric properties was investigated.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Structural, Dielectric and Ferroelectric Properties of Lead-free BCZT Ceramics Elaborated by Low-temperature Hydrothermal Processing
Authors:
Zouhair Hanani,
Daoud Mezzane,
Mbarek Amjoud,
Yaovi Gagou,
Khalid Hoummada,
Carine Perrin,
Anna G. Razumnaya,
Zdravko Kutnjak,
Adnane Bouzina,
Mimoun El Marssi,
Mohamed Goune,
Brigita Rozic
Abstract:
Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and…
▽ More
Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and ferroelectric properties of sintered BCZT ceramics at 1250 °C for 10h were investigated. XRD measurements revealed the presence of a single perovskite phase at room temperature with the coexistence of the orthorhombic and tetragonal symmetries. The increase of grain size and the ceramic density in BCZT ceramics result in an enhancement of the dielectric and ferroelectric properties of BCZT ceramics. More interestingly, the synthesis temperature of BCZT powders with high dielectric and ferroelectric properties could be decreased to a low temperature of 160 °C, which is about 1200 °C lower when compared with solid-state reaction and 840 °C lower when compared with sol-gel methods. The BCZT ceramics elaborated at 160 °C revealed excellent electrical properties. Hence, the use of low-temperature hydrothermal processing can be encouraging for the synthesis of lead-free ceramics with high dielectric and ferroelectric properties.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Structural, dielectric, ferroelectric and tuning properties of Pb-free ferroelectric Ba0.9Sr0.1Ti1-xSnxO3
Authors:
H. Zaitouni,
L. Hajji,
D. Mezzane,
E. Choukri,
Y. Gagou,
K. Hoummada,
A. Charai,
A. Alimoussa,
B. Rožič,
M. El Marssi,
Z. Kutnjak
Abstract:
A series of Pb-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) with 0 < x < 0.15 was successfully prepared via solid-state reaction method. The effect of Sn substitution on the crystal structure, microstructure, dielectric behavior, ferroelectric and tunable features of BSTS-x ceramics were systematically investigated. Room temperature (RT) x-ray diffraction (XRD) analysis using the Rie…
▽ More
A series of Pb-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) with 0 < x < 0.15 was successfully prepared via solid-state reaction method. The effect of Sn substitution on the crystal structure, microstructure, dielectric behavior, ferroelectric and tunable features of BSTS-x ceramics were systematically investigated. Room temperature (RT) x-ray diffraction (XRD) analysis using the Rietveld refinement method reveals that all the synthesized BSTS-x ceramics were well crystallized into single perovskite structure. The results show a tetragonal phase for 0.00 < x < 0.02, which evolves to orthorhombic and tetragonal coexisting phases for 0.05 < x < 0.07. The composition x = 0.10 showed a mixture of tetragonal, orthorhombic and rhombohedral phases at RT, while a single cubic phase is observed for x = 0.15. The crystal phases determined by XRD were confirmed by Raman spectroscopy. Enhanced dielectric permittivity with a maximum value of ε'~ 35000 is observed for x = 0.10 at RT. The ferroelectric behavior of BSTS-x ceramics was investigated through polarization hysteresis loops and tunability measurements. High tunability of 63% at RT and under the low DC-applied electric field of 1.40 kV/cm is achieved for x = 0.10.
△ Less
Submitted 13 November, 2020;
originally announced November 2020.
-
Phase transitions, energy storage performances and electrocaloric effect of the lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 ceramic relaxor
Authors:
Zouhair Hanani,
Daoud Mezzane,
M'barek Amjoud,
Anna G. Razumnaya,
Sebastien Fourcade,
Yaovi Gagou,
Khalid Hoummada,
Mimoun El Marssi,
Mohamed Goune
Abstract:
Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramic exhibits excellent dielectric, ferroelectric and piezoelectric properties at the Morphotropic Phase Boundary (MPB). Previously, we demonstrated that the use of the anionic surfactant Sodium Dodecyl Sulfate (SDS, NaC12H25SO4) could enhance the dielectric properties of BCZT ceramic using surfactant-assisted solvothermal processing [1]. In the prese…
▽ More
Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramic exhibits excellent dielectric, ferroelectric and piezoelectric properties at the Morphotropic Phase Boundary (MPB). Previously, we demonstrated that the use of the anionic surfactant Sodium Dodecyl Sulfate (SDS, NaC12H25SO4) could enhance the dielectric properties of BCZT ceramic using surfactant-assisted solvothermal processing [1]. In the present study, structural, dielectric, ferroelectric properties, as well as electrocaloric effect and energy storage performances of this BCZT ceramic were thoroughly investigated. X-ray diffraction (XRD) measurements revealed the presence of single perovskite phase at room temperature with the coexistence of orthorhombic and tetragonal symmetries. In-situ Raman spectroscopy results confirmed the existence of all phase transitions from rhombohedral through orthorhombic and tetragonal to cubic symmetries when the temperature varies as reported in undoped-BaTiO3. Evolution of energy storage performances with temperature have been investigated. BCZT ceramic exhibits a high energy storage efficiency of ~80% at 120 °C. In addition, the electrocaloric responsivity was found to be 0.164.10-6 K.m/V at 360 K.
△ Less
Submitted 7 May, 2019;
originally announced May 2019.
-
High Curie temperature Mn 5 Ge 3 thin films produced by non-diffusive reaction
Authors:
E. Assaf,
A. Portavoce,
K. Hoummada,
M. Bertoglio,
S. Bertaina
Abstract:
Polycrystalline Mn 5 Ge 3 thin films were produced on SiO 2 using magnetron sputtering and reactive diffusion (RD) or non-diffusive reaction (NDR). In situ X-ray diffraction and atomic force microscopy were used to determine the layer structures, and magnetic force microscopy, superconducting quantum interference device and ferromagnetic resonance were used to determine their magnetic properties.…
▽ More
Polycrystalline Mn 5 Ge 3 thin films were produced on SiO 2 using magnetron sputtering and reactive diffusion (RD) or non-diffusive reaction (NDR). In situ X-ray diffraction and atomic force microscopy were used to determine the layer structures, and magnetic force microscopy, superconducting quantum interference device and ferromagnetic resonance were used to determine their magnetic properties. RD-mediated layers exhibit similar magnetic properties as MBE-grown monocrystalline Mn 5 Ge 3 thin films, while NDR-mediated layers show magnetic properties similar to monocrystalline C-doped Mn 5 Ge 3 C x thin films with $0.1 \leq x \leq 0.2.$ NDR appears as a CMOS-compatible efficient method to produce good magnetic quality high-curie temperature Mn 5 Ge 3 thin films.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
Impact of directional walk on atom probe microanalysis
Authors:
Baptiste Gault,
Frederic Danoix,
Khalid Hoummada,
Dominique Mangelinck,
Harald Leitner
Abstract:
In the atom probe microanalysis of steels, inconsistencies in the measured compositions of solutes (C, N) have often been reported, as well as their appearance as molecular ions. Here we propose that these issues might arise from surface migration of solute atoms over the specimen surface. Surface migration of solutes is evidenced by field-ion microscopy observations, and its consequences on atom…
▽ More
In the atom probe microanalysis of steels, inconsistencies in the measured compositions of solutes (C, N) have often been reported, as well as their appearance as molecular ions. Here we propose that these issues might arise from surface migration of solute atoms over the specimen surface. Surface migration of solutes is evidenced by field-ion microscopy observations, and its consequences on atom probe microanalysis are detailed for a wide range of solute (P, Si, Mn, B, C, N). It is proposed that directional walk driven by field gradients over the specimen surface and thermally activated is the prominent effect.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Absence of boron aggregates in superconducting silicon confirmed by atom probe tomography
Authors:
K. Hoummada,
F. Dahlem,
T. Kociniewski,
J. Boulmer,
C. Dubois,
G. Prudon,
E. Bustarret,
H. Courtois,
D. Debarre,
D. Mangelinck
Abstract:
Superconducting boron-doped silicon films prepared by gas immersion laser do** (GILD) technique are analyzed by atom probe tomography. The resulting three-dimensional chemical composition reveals that boron atoms are incorporated into crystalline silicon in the atomic percent concentration range, well above their solubility limit, without creating clusters or precipitates at the atomic scale. Th…
▽ More
Superconducting boron-doped silicon films prepared by gas immersion laser do** (GILD) technique are analyzed by atom probe tomography. The resulting three-dimensional chemical composition reveals that boron atoms are incorporated into crystalline silicon in the atomic percent concentration range, well above their solubility limit, without creating clusters or precipitates at the atomic scale. The boron spatial distribution is found to be compatible with local density of states measurements performed by scanning tunneling spectroscopy. These results, combined with the observations of very low impurity level and of a sharp two-dimensional interface between doped and undoped regions show, that the Si:B material obtained by GILD is a well-defined random substitutional alloy endowed with promising superconducting properties.
△ Less
Submitted 6 November, 2012; v1 submitted 22 March, 2011;
originally announced March 2011.
