-
Effects of strain-tunable valleys on charge transport in bismuth
Authors:
Suguru Hosoi,
Fumu Tachibana,
Mai Sakaguchi,
Kentaro Ishida,
Masaaki Shimozawa,
Koichi Izawa,
Yuki Fuseya,
Yuto Kinoshita,
Masashi Tokunaga
Abstract:
The manipulation of the valley degree of freedom can boost the technological development of novel functional devices based on valleytronics. The current mainstream platform for valleytronics is to produce a monolayer with inversion asymmetry, in which the strain-band engineering through the substrates can serve to improve the performance of valley-based devices. However, pinpointing the effective…
▽ More
The manipulation of the valley degree of freedom can boost the technological development of novel functional devices based on valleytronics. The current mainstream platform for valleytronics is to produce a monolayer with inversion asymmetry, in which the strain-band engineering through the substrates can serve to improve the performance of valley-based devices. However, pinpointing the effective role of strain is inevitable for the precise design of the desired valley structure. Here, we demonstrate the charge transport under continuously controllable external strain for bulk bismuth crystals with three equivalent electron valleys and one hole valley. The strain response of resistance, namely elastoresistance, exhibits the evolutions in both antisymmetric and symmetric channels with decreasing temperature. The elastoresistance behaviors mainly reflect the significant changes in valley density depending on the symmetry of induced strain, evidenced by our strain-dependent quantum oscillation measurements and first-principle band calculations under strain. These facts suggest the successful tune and evaluation of the valley populations through strain-dependent charge valley transport.
△ Less
Submitted 2 April, 2024; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Zero-field current-induced Hall effect in ferrotoroidic metal
Authors:
K. Ota,
M. Shimozawa,
T. Muroya,
T. Miyamoto,
S. Hosoi,
A. Nakamura,
Y. Homma,
F. Honda,
D. Aoki,
K. Izawa
Abstract:
We have performed precise Hall measurements for the ferrotoroidic candidate material UNi4B. Below Neel temperature TN ~ 20 K (corresponding to the ferrotoroidic transition temperature), a Hall voltage becomes finite even at zero field and changes proportional to the square of current density; by contrast, it is almost zero above TN. Moreover, we have found that a current-induced magnetization esti…
▽ More
We have performed precise Hall measurements for the ferrotoroidic candidate material UNi4B. Below Neel temperature TN ~ 20 K (corresponding to the ferrotoroidic transition temperature), a Hall voltage becomes finite even at zero field and changes proportional to the square of current density; by contrast, it is almost zero above TN. Moreover, we have found that a current-induced magnetization estimated from our Hall effect measurements is qualitatively consistent with the previous directly measured value. These results provide strong evidence for a magnetoelectric phenomenon uniquely in ferrotoroidic metals -- a zero-field nonlinear Hall effect resulting from the current-induced magnetization connecting the ferrotoroidal moments.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
First application of mass measurement with the Rare-RI Ring reveals the solar r-process abundance trend at A=122 and A=123
Authors:
H. F. Li,
S. Naimi,
T. M. Sprouse,
M. R. Mumpower,
Y. Abe,
Y. Yamaguchi,
D. Nagae,
F. Suzaki,
M. Wakasugi,
H. Arakawa,
W. B. Dou,
D. Hamakawa,
S. Hosoi,
Y. Inada,
D. Kajiki,
T. Kobayashi,
M. Sakaue,
Y. Yokoda,
T. Yamaguchi,
R. Kagesawa,
D. Kamioka,
T. Moriguchi,
M. Mukai,
A. Ozawa,
S. Ota
, et al. (19 additional authors not shown)
Abstract:
The Rare-RI Ring (R3) is a recently commissioned cyclotron-like storage ring mass spectrometer dedicated to mass measurements of exotic nuclei far from stability at Radioactive Isotope Beam Factory (RIBF) in RIKEN. The first application of mass measurement using the R3 mass spectrometer at RIBF is reported. Rare isotopes produced at RIBF, $^{127}$Sn, $^{126}$In, $^{125}$Cd, $^{124}$Ag, $^{123}$Pd,…
▽ More
The Rare-RI Ring (R3) is a recently commissioned cyclotron-like storage ring mass spectrometer dedicated to mass measurements of exotic nuclei far from stability at Radioactive Isotope Beam Factory (RIBF) in RIKEN. The first application of mass measurement using the R3 mass spectrometer at RIBF is reported. Rare isotopes produced at RIBF, $^{127}$Sn, $^{126}$In, $^{125}$Cd, $^{124}$Ag, $^{123}$Pd, were injected in R3. Masses of $^{126}$In, $^{125}$Cd, and $^{123}$Pd were measured whereby the mass uncertainty of $^{123}$Pd was improved. This is the first reported measurement with a new storage ring mass spectrometery technique realized at a heavy-ion cyclotron and employing individual injection of the pre-identified rare nuclei. The latter is essential for the future mass measurements of the rarest isotopes produced at RIBF. The impact of the new $^{123}$Pd result on the solar $r$-process abundances in a neutron star merger event is investigated by performing reaction network calculations of 20 trajectories with varying electron fraction $Y_e$. It is found that the neutron capture cross section on $^{123}$Pd increases by a factor of 2.2 and $β$-delayed neutron emission probability, $P_\mathrm{1n}$, of $^{123}$Rh increases by 14\%. The neutron capture cross section on $^{122}$Pd decreases by a factor of 2.6 leading to pileup of material at $A=122$, thus reproducing the trend of the solar $r$-process abundances. The trend of the two-neutron separation energies (S$_\mathrm{2n}$) was investigated for the Pd isotopic chain. The new mass measurement with improved uncertainty excludes large changes of the S$_\mathrm{2n}$ value at $N=77$. Such large increase of the S$_\mathrm{2n}$ values before $N=82$ was proposed as an alternative to the quenching of the $N=82$ shell gap to reproduce $r$-process abundances in the mass region of $A=112-124$.
△ Less
Submitted 16 February, 2022; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Development of a large-area timing and position-sensitive foil-MCP detector for mass measurements at the Rare-RI Ring in RIKEN
Authors:
Z. Ge,
H. F. Li,
T. Uesaka,
S. Naimi,
D. Nagae,
Y. Abe,
S. Omika,
F. Suzaki,
Y. Yamaguchi,
M. Wakasugi,
T. Yamaguchi,
K. Wakayama,
H. Arakawa,
K. Inomata,
K. Nishimuro,
T. Kobayashi,
S. Hosoi,
Y. Inada,
A. Ozawa,
S. Suzuki,
T. Moriguchi,
D. Kamioka,
M. Mukai,
M. Amano,
A. Kitagawa
, et al. (6 additional authors not shown)
Abstract:
To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN N…
▽ More
To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN Nishina Center, Japan. Besides TOF mass measurements, the detector system will also be used for heavy ion beam trajectory monitoring or momentum measurements for both beam-line and in-ring at the Rare-RI Ring. The position and timing measurements of heavy ions are performed by detecting the secondary electrons (SEs) emitted from a conversion foil during the passage of the ion. The SEs are accelerated and bent with an angle of $90^{\circ}$ by electrostatic fields onto a micro-channel-plate (MCP) electron multiplier which is coupled with a position-sensitive delay-line anode. The dependence of the timing and position resolution on applied high voltages of the detector potential plates has been studied systematically via simulation and experimentally. An isochronous condition of secondary electron transmission in the electrostatic field of the detector is chosen to optimize the structure of the detector for high performance. The best achieved timing resolution is less than 50 ps (in $σ$) and position resolution $\sim$ 1 mm (in $σ$) for 2 dimensions, respectively. The overall efficiency is $\sim$ 95$\%$ for heavy ion beam and $\sim$ 75$\%$ for $α$ particle from $^{241}$Am source.
△ Less
Submitted 12 December, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
The relationship between transport anisotropy and nematicity in FeSe
Authors:
Jack Bartlett,
Alexander Steppke,
Suguru Hosoi,
Hilary Noad,
Joonbum Park,
Carsten Timm,
Takasada Shibauchi,
Andrew P. Mackenzie,
Clifford W. Hicks
Abstract:
The mechanism behind the nematicity of FeSe is not known. Through elastoresitivity measurements it has been shown to be an electronic instability. However, so far measurements have extended only to small strains, where the response is linear. Here, we apply large elastic strains to FeSe, and perform two types of measurements. (1) Using applied strain to control twinning, the nematic resistive anis…
▽ More
The mechanism behind the nematicity of FeSe is not known. Through elastoresitivity measurements it has been shown to be an electronic instability. However, so far measurements have extended only to small strains, where the response is linear. Here, we apply large elastic strains to FeSe, and perform two types of measurements. (1) Using applied strain to control twinning, the nematic resistive anisotropy at temperatures below the nematic transition temperature Ts is determined. (2) Resistive anisotropy is measured as nematicity is induced through applied strain at fixed temperature above Ts. In both cases, as nematicity strengthens the resistive anisotropy peaks about about 7%, then decreases. Below ~40 K, the nematic resistive anisotropy changes sign. We discuss possible implications of this behaviour for theories of nematicity. We report in addition: (1) Under experimentally accessible conditions with bulk crystals, stress, rather than strain, is the conjugate field to the nematicity of FeSe. (2) At low temperatures the twin boundary resistance is ~10% of the sample resistance, and must be properly subtracted to extract intrinsic resistivities. (3) Biaxial inplane compression increases both in-plane resistivity and the superconducting critical temperature Tc, consistent with a strong role of the yz orbital in the electronic correlations.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Dichotomy Between Orbital and Magnetic Nematic Instabilities in BaFe2S3
Authors:
Suguru Hosoi,
Takuya Aoyama,
Kousuke Ishida,
Yuta Mizukami,
Kazuki Hashizume,
Satoshi Imaizumi,
Yoshinori Imai,
Kenya Ohgushi,
Yusuke Nambu,
Motoi Kimata,
Shojiro Kimura,
Takasada Shibauchi
Abstract:
Nematic orders emerge nearly universally in iron-based superconductors, but elucidating their origins is challenging because of intimate couplings between orbital and magnetic fluctuations. The iron-based ladder material BaFe2S3, which superconducts under pressure, exhibits antiferromagnetic order below TN ~ 117K and a weak resistivity anomaly at T* ~ 180K, whose nature remains elusive. Here we re…
▽ More
Nematic orders emerge nearly universally in iron-based superconductors, but elucidating their origins is challenging because of intimate couplings between orbital and magnetic fluctuations. The iron-based ladder material BaFe2S3, which superconducts under pressure, exhibits antiferromagnetic order below TN ~ 117K and a weak resistivity anomaly at T* ~ 180K, whose nature remains elusive. Here we report angle-resolved magnetoresistance (MR) and elastoresistance (ER) measurements in BaFe2S3, which reveal distinct changes at T*. We find that MR anisotropy and ER nematic response are both suppressed near T*, implying that an orbital order promoting isotropic electronic states is stabilized at T*. Such an isotropic state below T* competes with the antiferromagnetic order, which is evidenced by the nonmonotonic temperature dependence of nematic fluctuations. In contrast to the cooperative nematic orders in spin and orbital channels in iron pnictides, the present competing orders can provide a new platform to identify the separate roles of orbital and magnetic fluctuations.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring
Authors:
D. Nagae,
Y. Abe,
S. Okada,
S. Omika,
K. Wakayama,
S. Hosoi,
S. Suzuki,
T. Moriguchi,
M. Amano,
D. Kamioka,
Z. Ge,
S. Naimi,
F. Suzaki,
N. Tadano,
R. Igosawa,
K. Inomata,
H. Arakawa,
K. Nishimuro,
T. Fujii,
T. Mitsui,
Y. Yanagisawa,
H. Baba,
S. Michimasa,
S. Ota,
G. Lorusso
, et al. (6 additional authors not shown)
Abstract:
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated a…
▽ More
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated and deflected by 90$^\circ$ toward the microchannel plate by electrostatic potentials. A thin carbon foil and a thin aluminum-coated mylar foil were used as conversion foils. We obtained time resolutions of 69(1) ps and 43(1) ps (standard deviation) for a $^{84}$Kr beam at an energy of 170 MeV/u when using the carbon and the aluminum-coated mylar foils, respectively. A detection efficiency of approximately 90% was obtained for both foils. The E-MCP detector equipped with the carbon foil was installed inside the Rare-RI Ring to confirm particle circulation within a demonstration experiment on mass measurements of nuclei around $^{78}$Ge produced by in-flight fission of uranium beam at the RI Beam Factory in RIKEN. Periodic time signals from circulating ions were clearly observed. Revolution times for $^{78}$Ge, $^{77}$Ga, and $^{76}$Zn were obtained. The results confirmed successful circulation of the short-lived nuclei inside the Rare-RI Ring.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Non-Fermi liquid transport in the vicinity of nematic quantum critical point of FeSe$_{1-x}$S$_x$ superconductor
Authors:
W. K. Huang,
S. Hosoi,
M. Čulo,
S. Kasahara,
Y. Sato,
K. Matsuura,
Y. Mizukami,
M. Berben,
N. E. Hussey,
H. Kontani,
T. Shibauchi,
Y. Matsuda
Abstract:
Non-Fermi liquids are strange metals whose physical properties deviate qualitatively from those of conventional metals due to strong quantum fluctuations. In this paper, we report transport measurements on the FeSe$_{1-x}$S$_x$ superconductor, which has a quantum critical point of a nematic order without accompanying antiferromagnetism. We find that in addition to a linear-in-temperature resistivi…
▽ More
Non-Fermi liquids are strange metals whose physical properties deviate qualitatively from those of conventional metals due to strong quantum fluctuations. In this paper, we report transport measurements on the FeSe$_{1-x}$S$_x$ superconductor, which has a quantum critical point of a nematic order without accompanying antiferromagnetism. We find that in addition to a linear-in-temperature resistivity $ρ_{xx}\propto T$, which is close to the Planckian limit, the Hall angle varies as $\cot θ_{\rm H} \propto T^2$ and the low-field magnetoresistance is well scaled as $Δρ_{xx}/ρ_{xx}\propto \tan^2 θ_{\rm H}$ in the vicinity of the nematic quantum critical point. This set of anomalous charge transport properties shows striking resemblance with those reported in cuprate, iron-pnictide and heavy fermion superconductors, demonstrating that the critical fluctuations of a nematic order with ${\bf q} \approx 0$ can also lead to a breakdown of the Fermi liquid description.
△ Less
Submitted 14 August, 2020;
originally announced August 2020.
-
Rigid platform for applying large tunable strains to mechanically delicate samples
Authors:
Joonbum Park,
Jack M. Bartlett,
Hilary M. L. Noad,
Alexander Stern,
Mark E. Barber,
Markus König,
Suguru Hosoi,
Takasada Shibauchi,
Andrew P. Mackenzie,
Alexander Steppke,
Clifford W. Hicks
Abstract:
Response to uniaxial stress has become a major probe of electronic materials. Tuneable uniaxial stress may be applied using piezoelectric actuators, and so far two methods have been developed to couple samples to actuators. In one, actuators apply force along the length of a free, beam-like sample, allowing very large strains to be achieved. In the other, samples are affixed directly to piezoelect…
▽ More
Response to uniaxial stress has become a major probe of electronic materials. Tuneable uniaxial stress may be applied using piezoelectric actuators, and so far two methods have been developed to couple samples to actuators. In one, actuators apply force along the length of a free, beam-like sample, allowing very large strains to be achieved. In the other, samples are affixed directly to piezoelectric actuators, allowing study of mechanically delicate materials. Here, we describe an approach that merges the two: thin samples are affixed to a substrate, that is then pressurized uniaxially using piezoelectric actuators. Using this approach, we demonstrate application of large elastic strains to mechanically delicate samples: the van der Waals-bonded material FeSe, and a sample of CeAuSb$_2$ that was shaped with a focused ion beam.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Divergent nematic susceptibility near the pseudogap critical point in a cuprate superconductor
Authors:
K. Ishida,
S. Hosoi,
Y. Teramoto,
T. Usui,
Y. Mizukami,
K. Itaka,
Y. Matsuda,
T. Watanabe,
T. Shibauchi
Abstract:
Superconductivity is a quantum phenomenon caused by bound pairs of electrons. In diverse families of strongly correlated electron systems, the electron pairs are not bound together by phonon exchange but instead by some other kind of bosonic fluctuations. In these systems, superconductivity is often found near a magnetic quantum critical point (QCP) where a magnetic phase vanishes in the zero-temp…
▽ More
Superconductivity is a quantum phenomenon caused by bound pairs of electrons. In diverse families of strongly correlated electron systems, the electron pairs are not bound together by phonon exchange but instead by some other kind of bosonic fluctuations. In these systems, superconductivity is often found near a magnetic quantum critical point (QCP) where a magnetic phase vanishes in the zero-temperature limit. Moreover, the maximum of superconducting transition temperature Tc frequently locates near the magnetic QCP, suggesting that the proliferation of critical spin fluctuations emanating from the QCP plays an important role in Cooper pairing. In cuprate superconductors, however, the superconducting dome is usually separated from the antiferromagnetic phase and Tc attains its maximum value near the verge of enigmatic pseudogap state that appears below do**-dependent temperature T*. Thus a clue to the pairing mechanism resides in the pseudogap and associated anomalous transport properties. Recent experiments suggested a phase transition at T*, yet, most importantly, relevant fluctuations associated with the pseudogap have not been identified. Here we report on direct observations of enhanced nematic fluctuations in (Bi,Pb)2Sr2CaCu2O8+d by elastoresistance measurements, which couple to twofold in-plane electronic anisotropy, i.e. electronic nematicity. The nematic susceptibility shows Curie-Weiss-like temperature dependence above T*, and an anomaly at T* evidences a second-order transition with broken rotational symmetry. Near the pseudogap end point, where Tc is not far from its peak in the superconducting dome, nematic susceptibility becomes singular and divergent, indicating the presence of a nematic QCP. This signifies quantum critical fluctuations of a nematic order, which has emerging links to the high-Tc superconductivity and strange metallic behaviours in cuprates.
△ Less
Submitted 20 August, 2019;
originally announced August 2019.
-
Emergent XY electronic nematicity in iron-based superconductors
Authors:
K. Ishida,
M. Tsujii,
S. Hosoi,
Y. Mizukami,
S. Ishida,
A. Iyo,
H. Eisaki,
T. Wolf,
K. Grube,
H. v. Löhneysen,
R. M. Fernandes,
T. Shibauchi
Abstract:
Electronic nematicity, a correlated state that spontaneously breaks rotational symmetry, is observed in several layered quantum materials. In contrast to their liquid-crystal counterparts, the nematic director cannot usually point in an arbitrary direction (XY nematics), but is locked by the crystal to discrete directions (Ising nematics),resulting in strongly anisotropic fluctuations above the tr…
▽ More
Electronic nematicity, a correlated state that spontaneously breaks rotational symmetry, is observed in several layered quantum materials. In contrast to their liquid-crystal counterparts, the nematic director cannot usually point in an arbitrary direction (XY nematics), but is locked by the crystal to discrete directions (Ising nematics),resulting in strongly anisotropic fluctuations above the transition. Here, we report on the observation of nearly isotropic XY-nematic fluctuations, via elastoresistance measurements, in hole-doped Ba$_{1-x}$Rb$_{x}$Fe$_{2}$As$_{2}$ iron-based superconductors. While for $x=0$ the nematic director points along the in-plane diagonals of the tetragonal lattice, for $x=1$ it points along the horizontal and vertical axes. Remarkably, for intermediate do**, the susceptibilities of these two symmetry-irreducible nematic channels display comparable Curie-Weiss behavior, thus revealing a nearly XY-nematic state. This opens a new route to assess this elusive electronic quantum liquid-crystalline state, which is a candidate to host unique phenomena not present in the Ising-nematic case.
△ Less
Submitted 14 March, 2019; v1 submitted 13 December, 2018;
originally announced December 2018.
-
Maximizing Tc by tuning nematicity and magnetism in FeSe1-xSx superconductors
Authors:
K. Matsuura,
Y. Mizukami,
Y. Arai,
Y. Sugimura,
N. Maejima,
A. Machida,
T. Watanuki,
T. Fukuda,
T. Yajima,
Z. Hiroi,
K. Y. Yip,
Y. C. Chan,
Q. Niu,
S. Hosoi,
K. Ishida,
K. Mukasa,
S. Kasahara,
J. -G. Cheng,
S. K. Goh,
Y. Matsuda,
Y. Uwatoko,
T. Shibauchi
Abstract:
A fundamental issue concerning iron-based superconductivity is the roles of electronic nematicity and magnetism in realising high transition temperature ($T_{\rm c}$). To address this issue, FeSe is a key material, as it exhibits a unique pressure phase diagram involving nonmagnetic nematic and pressure-induced antiferromagnetic ordered phases. However, as these two phases in FeSe overlap with eac…
▽ More
A fundamental issue concerning iron-based superconductivity is the roles of electronic nematicity and magnetism in realising high transition temperature ($T_{\rm c}$). To address this issue, FeSe is a key material, as it exhibits a unique pressure phase diagram involving nonmagnetic nematic and pressure-induced antiferromagnetic ordered phases. However, as these two phases in FeSe overlap with each other, the effects of two orders on superconductivity remain perplexing. Here we construct the three-dimensional electronic phase diagram, temperature ($T$) against pressure ($P$) and isovalent S-substitution ($x$), for FeSe$_{1-x}$S$_{x}$, in which we achieve a complete separation of nematic and antiferromagnetic phases. In between, an extended nonmagnetic tetragonal phase emerges, where we find a striking enhancement of $T_{\rm c}$. The completed phase diagram uncovers two superconducting domes with similarly high $T_{\rm c}$ on both ends of the dome-shaped antiferromagnetic phase. The $T_{\rm c}(P,x)$ variation implies that nematic fluctuations unless accompanying magnetism are not relevant for high-$T_{\rm c}$ superconductivity in this system.
△ Less
Submitted 6 September, 2017; v1 submitted 6 April, 2017;
originally announced April 2017.
-
Nematic quantum critical point without magnetism in FeSe1-xSx superconductors
Authors:
S. Hosoi,
K. Matsuura,
K. Ishida,
Hao Wang,
Y. Mizukami,
T. Watashige,
S. Kasahara,
Y. Matsuda,
T. Shibauchi
Abstract:
The importance of antiferromagnetic fluctuations are widely acknowledged in most unconventional superconductors. In addition, cuprates and iron pnictides often exhibit unidirectional (nematic) electronic correlations, including stripe and orbital orders, whose fluctuations may also play a key role for electron pairing. However, these nematic correlations are intertwined with antiferromagnetic or c…
▽ More
The importance of antiferromagnetic fluctuations are widely acknowledged in most unconventional superconductors. In addition, cuprates and iron pnictides often exhibit unidirectional (nematic) electronic correlations, including stripe and orbital orders, whose fluctuations may also play a key role for electron pairing. However, these nematic correlations are intertwined with antiferromagnetic or charge orders, preventing us to identify the essential role of nematic fluctuations. This calls for new materials having only nematicity without competing or coexisting orders. Here we report systematic elastoresistance measurements in FeSe$_{1-x}$S$_{x}$ superconductors, which, unlike other iron-based families, exhibit an electronic nematic order without accompanying antiferromagnetic order. We find that the nematic transition temperature decreases with sulphur content $x$, whereas the nematic fluctuations are strongly enhanced. Near $x\approx0.17$, the nematic susceptibility diverges towards absolute zero, revealing a nematic quantum critical point. This highlights FeSe$_{1-x}$S$_{x}$ as a unique nonmagnetic system suitable for studying the impact of nematicity on superconductivity.
△ Less
Submitted 4 April, 2016; v1 submitted 1 April, 2016;
originally announced April 2016.