-
Low-temperature synthesis and electrocatalytic application of large-area PtTe2 thin films
Authors:
John B. Mc Manus,
Dominik V. Horvath,
Michelle P. Browne,
Conor P. Cullen,
Graeme Cunningham,
Toby Hallam,
Kuanysh Zhussupbekov,
Daragh Mullarkey,
Cormac Ó Coileáin,
Igor V. Shvets,
Martin Pumera,
Georg S. Duesberg,
Niall McEvoy
Abstract:
The synthesis of transition metal dichalcogenides (TMDs) has been a primary focus for 2D nanomaterial research over the last 10 years, however, only a small fraction of this research has been concentrated on transition metal ditellurides. In particular, nanoscale platinum ditelluride (PtTe2) has rarely been investigated, despite its potential applications in catalysis, photonics and spintronics. O…
▽ More
The synthesis of transition metal dichalcogenides (TMDs) has been a primary focus for 2D nanomaterial research over the last 10 years, however, only a small fraction of this research has been concentrated on transition metal ditellurides. In particular, nanoscale platinum ditelluride (PtTe2) has rarely been investigated, despite its potential applications in catalysis, photonics and spintronics. Of the reports published, the majority examine mechanically-exfoliated flakes from chemical vapor transport (CVT) grown crystals. While this production method is ideal for fundamental studies, it is very resource intensive therefore rendering this process unsuitable for large scale applications. In this report, the synthesis of thin films of PtTe2 through the reaction of solid-phase precursor films is described. This offers a production method for large-area, thickness-controlled PtTe2, suitable for a range of applications. These polycrystalline PtTe2 films were grown at temperatures as low as 450 degC, significantly below the typical temperatures used in the CVT synthesis methods. To investigate their potential applicability, these films were examined as electrocatalysts for the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). The films showed promising catalytic behavior, however, the PtTe2 was found to undergo chemical transformation to a substoichiometric chalcogenide compound under ORR conditions. This study shows while PtTe2 is stable and highly useful for HER, this property does not apply to ORR, which undergoes a fundamentally different mechanism. This study broadens our knowledge of the electrocatalysis of TMDs.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Do 2D material-based battery electrodes have inherently poor rate-performance?
Authors:
Ruiyuan Tian,
Madeleine Breshears,
Dominik V Horvath,
Jonathan N Coleman
Abstract:
Two dimensional materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate-performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as…
▽ More
Two dimensional materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate-performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as non-2D materials for comparison. For each capacity-rate curve we extract parameters which quantify performance which can then be analyzed using a simple mechanistic model. Contrary to expectations, by comparing a previously-proposed figure of merit, we find 2D-based electrodes to be on average ~40 times poorer in terms of rate performance than non-2D materials. This is not due to differences in solid-state diffusion times which were similarly distributed for 2D and non-2D materials. In fact, we found the main difference between 2D and non-2D materials to be that ion mobility within the electrolyte-filled pores of the electrodes to be significantly lower for 2D materials, a situation which we attribute to their high aspect ratios.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Using chronoamperometry to rapidly measure and quantitatively analyse rate-performance in battery electrodes
Authors:
Ruiyuan Tian,
Paul J. King,
Joao Coelho,
Sang-Hoon Park,
Dominik V Horvath,
Valeria Nicolosi,
Colm ODwyer,
Jonathan N Coleman
Abstract:
For battery electrodes, measured capacity decays as charge/discharge current is increased. Such rate-performance is important from a practical perspective and is usually characterised via galvanostatic charge-discharge measurements. However, such measurements are very slow, limiting the number of rate experiments which are practical in a given project. This is a particular problem during mechanist…
▽ More
For battery electrodes, measured capacity decays as charge/discharge current is increased. Such rate-performance is important from a practical perspective and is usually characterised via galvanostatic charge-discharge measurements. However, such measurements are very slow, limiting the number of rate experiments which are practical in a given project. This is a particular problem during mechanistic studies where many rate measurements are needed. Here, building on work by Heubner at al., we demonstrate chronoamperometry (CA) as a relatively fast method for measuring capacity-rate curves with hundreds of data points down to C-rates below 0.01C. While Heubner et al. reported equations to convert current transients to capacity vs. C-rate curves, we modify these equations to give capacity as a function of charge/discharge rate, R. We show that such expressions can be combined with a basic model to obtain simple equations which can fit data for both capacity vs. C-rate and capacity vs. R. We demonstrate that these equations can accurately fit experimental data within normal experimental ranges of rate. However, we also observe that, at high rates, the curves obtained from CA deviate from the normal behaviour showing a new, previously unobserved, decay feature. We associate this feature with the very early part of the current transient where electronic motion dominates the current. Using a simple model, we show that the dependence of the high-rate time constant on electrode thickness can be linked to electrode conductivity.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
