-
A swimming bacterium in a two-fluid model of a polymer solution
Authors:
Sabarish V. Narayanan,
Donald L. Koch,
Sarah Hormozi
Abstract:
We analyse the motion of a flagellated bacterium in a two-fluid medium using slender body theory. The two-fluid model is useful for describing a body moving through a complex fluid with a microstructure whose length scale is comparable to the characteristic scale of the body. This is true for bacterial motion in biological fluids (entangled polymer solutions), where the entanglement results in a p…
▽ More
We analyse the motion of a flagellated bacterium in a two-fluid medium using slender body theory. The two-fluid model is useful for describing a body moving through a complex fluid with a microstructure whose length scale is comparable to the characteristic scale of the body. This is true for bacterial motion in biological fluids (entangled polymer solutions), where the entanglement results in a porous microstructure with typical pore diameters comparable to or larger than the flagellar bundle diameter but smaller than the diameter of the bacterial head. Thus the polymer and solvent satisfy different boundary conditions on the flagellar bundle and move with different velocities close to it. This gives rise to a screening length $L_B$ within which the fluids exchange momentum and the relative velocity between the two fluids decays. In this work, both the solvent and polymer of the two-fluid medium are modeled as Newtonian fluids with different viscosities $μ_s$ and $μ_p$ (viscosity ratio $λ= μ_p/μ_s$), thereby capturing the effects solely introduced by the microstructure of the complex fluid. From our calculations, we observe an increased drag anisotropy for a rigid, slender flagellar bundle moving through this two-fluid medium, resulting in an enhanced swimming velocity of the organism. The results are sensitive to the interaction between the bundle and the polymer and we discuss two physical scenarios corresponding to two types of interaction. Our model provides an explanation for the experimentally observed enhancement of swimming velocity of bacteria in entangled polymer solutions and motivates further experimental investigations.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Perspectives on viscoelastic flow instabilities and elastic turbulence
Authors:
Sujit S. Datta,
Arezoo M. Ardekani,
Paulo E. Arratia,
Antony N. Beris,
Irmgard Bischofberger,
Jens G. Eggers,
J. Esteban López-Aguilar,
Suzanne M. Fielding,
Anna Frishman,
Michael D. Graham,
Jeffrey S. Guasto,
Simon J. Haward,
Sarah Hormozi,
Gareth H. McKinley,
Robert J. Poole,
Alexander Morozov,
V. Shankar,
Eric S. G. Shaqfeh,
Amy Q. Shen,
Holger Stark,
Victor Steinberg,
Ganesh Subramanian,
Howard A. Stone
Abstract:
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h…
▽ More
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Numerical simulations of a sphere settling in simple shear flows of yield stress fluids
Authors:
Mohammad Sarabian,
Marco E. Rosti,
Luca Brandt,
Sarah Hormozi
Abstract:
We perform $3$D numerical simulations to investigate the sedimentation of a single sphere in the absence and presence of a simple cross shear flow in a yield stress fluid with weak inertia. In our simulations, the settling flow is considered to be the primary flow, whereas the linear cross shear flow is a secondary flow with amplitude $10\%$ of the primary flow. To study the effects of elasticity…
▽ More
We perform $3$D numerical simulations to investigate the sedimentation of a single sphere in the absence and presence of a simple cross shear flow in a yield stress fluid with weak inertia. In our simulations, the settling flow is considered to be the primary flow, whereas the linear cross shear flow is a secondary flow with amplitude $10\%$ of the primary flow. To study the effects of elasticity and plasticity of the carrying fluid on the sphere drag as well as the flow dynamics, the fluid is modeled using the elastovisco-plastic (EVP) constitutive laws proposed by \cite{saramito2009new}. The extra non-Newtonian stress tensor is fully coupled with the flow equation and the solid particle is represented by an immersed boundary (IB) method. Our results show that the fore-aft asymmetry in the velocity is less pronounced and the negative wake disappears when a linear cross shear flow is applied. We find that the drag on a sphere settling in a sheared yield stress fluid is reduced significantly as compared to an otherwise quiescent fluid. More importantly, the sphere drag in the presence of a secondary cross shear flow cannot be derived from the pure sedimentation drag law owing to the non-linear coupling between the simple shear flow and the uniform flow. Finally, we show that the drag on the sphere settling in a sheared yield-stress fluid is reduced at higher material elasticity mainly due to the form and viscous drag reduction.
△ Less
Submitted 17 May, 2020;
originally announced May 2020.
-
Fully developed and transient concentration profiles of particulate suspensions sheared in a cylindrical Couette
Authors:
Mohammad Sarabian,
Mohammadhossein Firouznia,
Bloen Metzger,
Sarah Hormozi
Abstract:
We experimentally investigate particle migration in a non-Brownian suspension sheared in a Taylor-Couette configuration and in the limit of vanishing Reynolds number. Highly resolved index-matching techniques are used to measure the local particulate volume fraction. In this wide-gap Taylor-Couette configuration, we find that for a large range of bulk volume fraction, $φ_b \in [20\% - 50\%]$, the…
▽ More
We experimentally investigate particle migration in a non-Brownian suspension sheared in a Taylor-Couette configuration and in the limit of vanishing Reynolds number. Highly resolved index-matching techniques are used to measure the local particulate volume fraction. In this wide-gap Taylor-Couette configuration, we find that for a large range of bulk volume fraction, $φ_b \in [20\% - 50\%]$, the fully developed concentration profiles are well predicted by the suspension balance model of Nott \& Brady (J. Fluid Mech., vol. 275, 1994, pp. 157-199). Moreover, we provide systematic measurements of the migration strain scale and of the migration amplitude which highlight the limits of the suspension balance model predictions.
△ Less
Submitted 2 June, 2019;
originally announced June 2019.
-
Turbulent channel flow of an elastoviscoplastic fluid
Authors:
Marco Edoardo Rosti,
Daulet Izbassarov,
Outi Tammisola,
Sarah Hormozi,
Luca Brandt
Abstract:
We present numerical simulations of laminar and turbulent channel flow of an elastoviscoplastic fluid. The non-Newtonian flow is simulated by solving the full incompressible Navier-Stokes equations coupled with the evolution equation for the elastoviscoplastic stress tensor. The laminar simulations are carried out for a wide range of Reynolds numbers, Bingham numbers and ratios of the fluid and to…
▽ More
We present numerical simulations of laminar and turbulent channel flow of an elastoviscoplastic fluid. The non-Newtonian flow is simulated by solving the full incompressible Navier-Stokes equations coupled with the evolution equation for the elastoviscoplastic stress tensor. The laminar simulations are carried out for a wide range of Reynolds numbers, Bingham numbers and ratios of the fluid and total viscosity, while the turbulent flow simulations are performed at a fixed bulk Reynolds number equal to 2800 and weak elasticity. We show that in the laminar flow regime the friction factor increases monotonically with the Bingham number (yield stress) and decreases with the viscosity ratio, while in the turbulent regime the the friction factor is almost independent of the viscosity ratio and decreases with the Bingham number, until the flow eventually returns to a fully laminar condition for large enough yield stresses. Three main regimes are found in the turbulent case, depending on the Bingham number: for low values, the friction Reynolds number and the turbulent flow statistics only slightly differ from those of a Newtonian fluid; for intermediate values of the Bingham number, the fluctuations increase and the inertial equilibrium range is lost. Finally, for higher values the flow completely laminarises. These different behaviors are associated with a progressive increases of the volume where the fluid is not yielded, growing from the centerline towards the walls as the Bingham number increases. The unyielded region interacts with the near-wall structures, forming preferentially above the high speed streaks. In particular, the near-wall streaks and the associated quasi-streamwise vortices are strongly enhanced in an highly elastoviscoplastic fluid and the flow becomes more correlated in the streamwise direction.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Computational modeling of multiphase viscoelastic and elastoviscoplastic flows
Authors:
Daulet Izbassarov,
Marco E. Rosti,
M. Niazi Ardekani,
Mohammad Sarabian,
Sarah Hormozi,
Luca Brandt,
Outi Tammisola
Abstract:
In this paper, a three-dimensional numerical solver is developed for suspensions of rigid and soft particles and droplets in viscoelastic and elastoviscoplastic (EVP) fluids. The presented algorithm is designed to allow for the first time three-dimensional simulations of inertial and turbulent EVP fluids with a large number particles and droplets. This is achieved by combining fast and highly scal…
▽ More
In this paper, a three-dimensional numerical solver is developed for suspensions of rigid and soft particles and droplets in viscoelastic and elastoviscoplastic (EVP) fluids. The presented algorithm is designed to allow for the first time three-dimensional simulations of inertial and turbulent EVP fluids with a large number particles and droplets. This is achieved by combining fast and highly scalable methods such as an FFT-based pressure solver, with the evolution equation for non-Newtonian (including elastoviscoplastic) stresses. In this flexible computational framework, the fluid can be modelled by either Oldroyd-B, neo-Hookean, FENE-P, and Saramito EVP models, and the additional equations for the non-Newtonian stresses are fully coupled with the flow. The rigid particles are discretized on a moving Lagrangian grid while the flow equations are solved on a fixed Eulerian grid. The solid particles are represented by an Immersed Boundary method (IBM) with a computationally efficient direct forcing method allowing simulations of a large numbers of particles. The immersed boundary force is computed at the particle surface and then included in the momentum equations as a body force. The droplets and soft particles on the other hand are simulated in a fully Eulerian framework, the former with a level-set method to capture the moving interface and the latter with an indicator function. The solver is first validated for various benchmark single-phase and two-phase elastoviscoplastic flow problems through comparison with data from the literature. Finally, we present new results on the dynamics of a buoyancy-driven drop in an elastoviscoplastic fluid.
△ Less
Submitted 22 August, 2018; v1 submitted 26 March, 2018;
originally announced March 2018.
-
Elastoviscoplastic flow in porous media
Authors:
F. De Vita,
M. E. Rosti,
D. Izbassarov,
L. Duffo,
O. Tammisola,
S. Hormozi,
L. Brandt
Abstract:
We investigate the elastoviscoplastic flow through porous media by numerical simulations. We solve the Navier-Stokes equations combined with the elastoviscoplastic model proposed by Saramito for the stress tensor evolution. In this model, the material behaves as a viscoelastic solid when unyielded, and as a viscoelastic Oldroyd-B fluid for stresses higher than the yield stress. The porous media is…
▽ More
We investigate the elastoviscoplastic flow through porous media by numerical simulations. We solve the Navier-Stokes equations combined with the elastoviscoplastic model proposed by Saramito for the stress tensor evolution. In this model, the material behaves as a viscoelastic solid when unyielded, and as a viscoelastic Oldroyd-B fluid for stresses higher than the yield stress. The porous media is made of a symmetric array of cylinders, and we solve the flow in one periodic cell. We find that the solution is time-dependent even at low Reynolds numbers as we observe oscillations in time of the unyielded region especially at high Bingham numbers. The volume of the unyielded region slightly decreases with the Reynolds number and strongly increases with the Bingham number; up to 70% of the total volume is unyielded for the highest Bingham numbers considered here. The flow is mainly shear dominated in the yielded region, while shear and elongational flow are equally distributed in the unyielded region. We compute the relation between the pressure drop and the flow rate in the porous medium and present an empirical closure as function of the Bingham and Reynolds numbers. The apparent permeability, normalized with the case of Newtonian fluids, is shown to be greater than 1 at low Bingham numbers, corresponding to lower pressure drops due to the flow elasticity, and smaller than 1 for high Bingham numbers, indicating larger dissipation in the flow owing to the presence of the yielded regions. Finally we investigate the effect of the Weissenberg number on the distribution of the unyielded regions and on the pressure gradient.
△ Less
Submitted 12 April, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Interface-resolved simulations of particle suspensions in Newtonian, shear thinning and shear thickening carrier fluids
Authors:
Dhiya Alghalibi,
Iman Lashgari,
Luca Brandt,
Sarah Hormozi
Abstract:
We present a numerical study of noncolloidal spherical and rigid particles suspended in Newtonian, shear thinning and shear thickening fluids employing an Immersed Boundary Method. We consider a linear Couette configuration to explore a wide range of solid volume fractions ($0.1\le Φ\le 0.4$) and particle Reynolds Numbers ($0.1\le Re_p \le 10$). We report the distribution of solid and fluid phase…
▽ More
We present a numerical study of noncolloidal spherical and rigid particles suspended in Newtonian, shear thinning and shear thickening fluids employing an Immersed Boundary Method. We consider a linear Couette configuration to explore a wide range of solid volume fractions ($0.1\le Φ\le 0.4$) and particle Reynolds Numbers ($0.1\le Re_p \le 10$). We report the distribution of solid and fluid phase velocity and solid volume fraction and show that close to the boundaries inertial effects result in a significant slip velocity between the solid and fluid phase. The local solid volume fraction profiles indicate particle layering close to the walls, which increases with the nominal $Φ$. This feature is associated with the confinement effects. We calculate the probability density function of local strain rates and compare their mean value with the values estimated from the homogenization theory of \cite{Chateau08}, indicating a reasonable agreement in the Stokesian regimes. Both the mean value and standard deviation of the local strain rates increase primarily with the solid volume fraction and secondarily with the $Re_p$. The wide spectrum of the local shear rate and its dependency on $Φ$ and $Re_p$ points to the deficiencies of the mean value of the local shear rates in estimating the rheology of these noncolloidal complex suspensions. Finally, we show that in the presence of inertia, the effective viscosity of these noncolloidal suspensions deviates from that of Stokesian suspensions. We discuss how inertia affects the microstructure and provide a scaling argument to give a closure for the suspension shear stress for both Newtonian and power-law suspending fluids. The stress closure is valid for moderate particle Reynolds numbers, $ O(Re_p)\sim 10$.
△ Less
Submitted 11 November, 2017;
originally announced November 2017.
