Showing 1–15 of 15 results for author: Hopper, D

Hardware Trojan Detection Potential and Limits with the Quantum Diamond Microscope

Authors: Jacob N. Lenz, Scott K. Perryman, Dmitro J. Martynowych, David A. Hopper, Sean M. Oliver

Abstract: The Quantum Diamond Microscope (QDM) is an instrument with a demonstrated capability to image electrical current in integrated circuits (ICs), which shows promise for detection of hardware Trojans. The anomalous current activity caused by hardware Trojans manifests through a magnetic field side channel that can be imaged with the QDM, potentially allowing for detection and localization of the effe… ▽ More The Quantum Diamond Microscope (QDM) is an instrument with a demonstrated capability to image electrical current in integrated circuits (ICs), which shows promise for detection of hardware Trojans. The anomalous current activity caused by hardware Trojans manifests through a magnetic field side channel that can be imaged with the QDM, potentially allowing for detection and localization of the effects of tampering. This paper seeks to identify the capabilities of the QDM for hardware Trojan detection through the analysis of previous QDM work as well as QDM physical limits and potential Trojan behaviors. QDM metrics of interest are identified, such as spatial resolution, sensitivity, time-to-result, and field-of-view. Rare event detection on an FPGA is demonstrated with the QDM. The concept of operations is identified for QDM utilization at different steps of IC development, noting necessary considerations and limiting factors for use at different development stages. Finally, the effects of hardware Trojans on IC current activity are estimated and compared to QDM sensitivities to project QDM detection potential for ICs of varying process sizes. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Room Temperature Dynamics of an Optically Addressable Single Spin in Hexagonal Boron Nitride

Authors: Raj N. Patel, Rebecca E. K. Fishman, Tzu-Yung Huang, Jordan A. Gusdorff, David A. Fehr, David A. Hopper, S. Alex Breitweiser, Benjamin Porat, Michael E. Flatté, Lee C. Bassett

Abstract: Hexagonal boron nitride (h-BN) hosts pure single-photon emitters that have shown evidence of optically detected electronic spin dynamics. However, the electrical and chemical structure of these optically addressable spins is unknown, and the nature of their spin-optical interactions remains mysterious. Here, we use time-domain optical and microwave experiments to characterize a single emitter in h… ▽ More Hexagonal boron nitride (h-BN) hosts pure single-photon emitters that have shown evidence of optically detected electronic spin dynamics. However, the electrical and chemical structure of these optically addressable spins is unknown, and the nature of their spin-optical interactions remains mysterious. Here, we use time-domain optical and microwave experiments to characterize a single emitter in h-BN exhibiting room temperature optically detected magnetic resonance. Using dynamical simulations, we constrain and quantify transition rates in the model, and we design optical control protocols that optimize the signal-to-noise ratio for spin readout. This constitutes a necessary step towards quantum control of spin states in h-BN. △ Less

Submitted 8 November, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 15 pages, 15 figures. Updates in version 2 include modifications to figure 4, an updated estimate for T2*, and minor syntax edits to the main text and supplement for clarity

Vector Magnetic Current Imaging of an 8 nm Process Node Chip and 3D Current Distributions Using the Quantum Diamond Microscope

Authors: Sean M. Oliver, Dmitro J. Martynowych, Matthew J. Turner, David A. Hopper, Ronald L. Walsworth, Edlyn V. Levine

Abstract: The adoption of 3D packaging technology necessitates the development of new approaches to failure electronic device analysis. To that end, our team is develo** a tool called the quantum diamond microscope (QDM) that leverages an ensemble of nitrogen vacancy (NV) centers in diamond, achieving vector magnetic imaging with a wide field-of-view and high spatial resolution under ambient conditions. H… ▽ More The adoption of 3D packaging technology necessitates the development of new approaches to failure electronic device analysis. To that end, our team is develo** a tool called the quantum diamond microscope (QDM) that leverages an ensemble of nitrogen vacancy (NV) centers in diamond, achieving vector magnetic imaging with a wide field-of-view and high spatial resolution under ambient conditions. Here, we present the QDM measurement of 2D current distributions in an 8-nm flip chip IC and 3D current distributions in a multi-layer PCB. Magnetic field emanations from the C4 bumps in the flip chip dominate the QDM measurements, but these prove to be useful for image registration and can be subtracted to resolve adjacent current traces in the die at the micron scale. Vias in 3D ICs display only Bx and By magnetic fields due to their vertical orientation and are difficult to detect with magnetometers that only measure the Bz component (orthogonal to the IC surface). Using the multi-layer PCB, we show that the QDM's ability to simultaneously measure Bx, By, and Bz is advantageous for resolving magnetic fields from vias as current passes between layers. We also show how spacing between conducting layers is determined by magnetic field images and how it agrees with the design specifications of the PCB. In our initial efforts to provide further z-depth information for current sources in complex 3D circuits, we show how magnetic field images of individual layers can be subtracted from the magnetic field image of the total structure. This allows for isolation of signal layers and can be used to map embedded current paths via solution of the 2D magnetic inverse. In addition, the paper also discusses the use of neural networks to identify 2D current distributions and its potential for analyzing 3D structures. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Probing the Optical Dynamics of Quantum Emitters in Hexagonal Boron Nitride

Authors: Raj N. Patel, David A. Hopper, Jordan A. Gusdorff, Mark E. Turiansky, Tzu-Yung Huang, Rebecca E. K. Fishman, Benjamin Porat, Chris G. Van de Walle, Lee C. Bassett

Abstract: Hexagonal boron nitride is a van der Waals material that hosts visible-wavelength quantum emitters at room temperature. However, experimental identification of the quantum emitters' electronic structure is lacking, and key details of their charge and spin properties remain unknown. Here, we probe the optical dynamics of quantum emitters in hexagonal boron nitride using photon emission correlation… ▽ More Hexagonal boron nitride is a van der Waals material that hosts visible-wavelength quantum emitters at room temperature. However, experimental identification of the quantum emitters' electronic structure is lacking, and key details of their charge and spin properties remain unknown. Here, we probe the optical dynamics of quantum emitters in hexagonal boron nitride using photon emission correlation spectroscopy. Several quantum emitters exhibit ideal single-photon emission with noise-limited photon antibunching, $g^{(2)}(0)=0$. The photoluminescence emission lineshapes are consistent with individual vibronic transitions. However, polarization-resolved excitation and emission suggests the role of multiple optical transitions, and photon emission correlation spectroscopy reveals complicated optical dynamics associated with excitation and relaxation through multiple electronic excited states. We compare the experimental results to quantitative optical dynamics simulations, develop electronic structure models that are consistent with the observations, and discuss the results in the context of ab initio theoretical calculations. △ Less

Submitted 21 January, 2022; originally announced January 2022.

Comments: 31 pages, 16 figures, 6 tables

Journal ref: PRX Quantum 3, 030331 (2022)

Photon emission correlation spectroscopy as an analytical tool for quantum defects

Authors: Rebecca E. K. Fishman, Raj N. Patel, David A. Hopper, Tzu-Yung Huang, Lee C. Bassett

Abstract: Photon emission correlation spectroscopy is an indispensable tool for the study of atoms, molecules, and, more recently, solid-state quantum defects. In solid-state systems, its most common use is as an indicator of single-photon emission, a key property for quantum technology. Beyond an emitter's single-photon purity, however, photon correlation measurements can provide a wealth of information th… ▽ More Photon emission correlation spectroscopy is an indispensable tool for the study of atoms, molecules, and, more recently, solid-state quantum defects. In solid-state systems, its most common use is as an indicator of single-photon emission, a key property for quantum technology. Beyond an emitter's single-photon purity, however, photon correlation measurements can provide a wealth of information that can reveal details about its electronic structure and optical dynamics that are hidden by other spectroscopy techniques. This tutorial presents a standardized framework for using photon emission correlation spectroscopy to study quantum emitters, including discussion of theoretical background, considerations for data acquisition and statistical analysis, and interpretation. We highlight important nuances and best practices regarding the commonly-used $g^{(2)}(τ=0)<0.5$ test for single-photon emission. Finally, we illustrate how this experimental technique can be paired with optical dynamics simulations to formulate an electronic model for unknown quantum emitters, enabling the design of quantum control protocols and assessment of their suitability for quantum information science applications. △ Less

Submitted 29 August, 2022; v1 submitted 1 November, 2021; originally announced November 2021.

Comments: 22 pages, 7 figures. Updates in version 3 include the addition of equations (9) and (10) in the main text and table S1 in the appendix and minor syntax edits to the main text and appendix for clarity

Journal ref: PRX Quantum 4, 010202 (2023)

Direct imaging of antiferromagnetic domains and anomalous layer-dependent mirror symmetry breaking in atomically thin MnPS$_3$

Authors: Zhuoliang Ni, Huiqin Zhang, David Hopper, Amanda V. Haglund, Nan Huang, Deep Jariwala, Lee Bassett, David G. Mandrus, Eugene J. Mele, Charles L. Kane, Liang Wu

Abstract: We have developed a sensitive cryogenic second-harmonic generation microscopy to study a van der Waals antiferromagnet MnPS$_3$. We find that long-range Néel antiferromagnetic order develops from the bulk crystal down to the bilayer, while it is absent in the monolayer. Before entering the long-range antiferromagnetic ordered phase in all samples, an upturn of the second harmonic generation below… ▽ More We have developed a sensitive cryogenic second-harmonic generation microscopy to study a van der Waals antiferromagnet MnPS$_3$. We find that long-range Néel antiferromagnetic order develops from the bulk crystal down to the bilayer, while it is absent in the monolayer. Before entering the long-range antiferromagnetic ordered phase in all samples, an upturn of the second harmonic generation below 200 K indicates the formation of the short-range order and magneto-elastic coupling. We also directly image the two antiphase (180$^{\circ}$) antiferromagnetic domains and thermally-induced domain switching down to bilayer. An anomalous mirror symmetry breaking shows up in samples thinner than ten layers for the temperature both above and below the Néel temperature, which indicates a structural change in few-layer samples. Minimal change of the second harmonic generation polar patterns in strain tuning experiments indicate that the symmetry crossover at ten layers is most likely an intrinsic property of MnPS$_3$ instead of an extrinsic origin of substrate-induced strain. Our results show that second harmonic generation microscopy is a direct tool for studying antiferromagnetic domains in atomically thin materials, and opens a new way to study two-dimensional antiferromagnets. △ Less

Submitted 5 October, 2021; originally announced October 2021.

Comments: To appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 127, 187201 (2021)

Efficient Optical Quantification of Heterogeneous Emitter Ensembles

Authors: S. Alex Breitweiser, Annemarie L. Exarhos, Raj N. Patel, Jennifer Saouaf, Benjamin Porat, David A. Hopper, Lee C. Bassett

Abstract: Defect-based quantum emitters in solid state materials offer a promising platform for quantum communication and sensing. Confocal fluorescence microscopy techniques have revealed quantum emitters in a multitude of host materials. In some materials, however, optical properties vary widely between emitters, even within the same sample. In these cases, traditional ensemble fluorescence measurements a… ▽ More Defect-based quantum emitters in solid state materials offer a promising platform for quantum communication and sensing. Confocal fluorescence microscopy techniques have revealed quantum emitters in a multitude of host materials. In some materials, however, optical properties vary widely between emitters, even within the same sample. In these cases, traditional ensemble fluorescence measurements are confounded by heterogeneity, whereas individual defect-by-defect studies are impractical. Here, we develop a method to quantitatively and systematically analyze the properties of heterogeneous emitter ensembles using large-area photoluminescence maps. We apply this method to study the effects of sample treatments on emitters in hexagonal boron nitride, and we find that low-energy (3 keV) electron irradiation creates emitters, whereas high-temperature (850 $^\circ$C) annealing in an inert gas environment brightens emitters. △ Less

Submitted 27 September, 2019; originally announced September 2019.

Comments: 18 pages; Raw data and analysis included as ancillary file

Journal ref: ACS Photonics 7, 288-295 (2020)

Real-Time Charge Initialization of Diamond Nitrogen-Vacancy Centers for Enhanced Spin Readout

Authors: David A. Hopper, Joseph D. Lauigan, Tzu-Yung Huang, Lee C. Bassett

Abstract: A common impediment to qubit performance is imperfect state initialization. In the case of the diamond nitrogen-vacancy (NV) center, the initialization fidelity is limited by fluctuations in the defect's charge state during optical pum**. Here, we use real-time control to deterministically initialize the NV center's charge state at room temperature. We demonstrate a maximum charge initialization… ▽ More A common impediment to qubit performance is imperfect state initialization. In the case of the diamond nitrogen-vacancy (NV) center, the initialization fidelity is limited by fluctuations in the defect's charge state during optical pum**. Here, we use real-time control to deterministically initialize the NV center's charge state at room temperature. We demonstrate a maximum charge initialization fidelity of 99.4$\pm$0.1% and present a quantitative model of the initialization process that allows for systems-level optimization of the spin-readout signal-to-noise ratio. Even accounting for the overhead associated with the initialization sequence, increasing the charge initialization fidelity from the steady-state value of 75% near to unity allows for a factor-of-two speedup in experiments while maintaining the same signal-to-noise-ratio. In combination with high-fidelity readout based on spin-to-charge conversion, real-time initialization enables a factor-of-20 speedup over traditional methods, resulting in an ac magnetic sensitivity of 1.3 nT/Hz$^{1/2}$ for our single NV-center spin. The real-time control method is immediately beneficial for quantum sensing applications with NV centers as well as probing charge-dependent physics, and it will facilitate protocols for quantum feedback control over multi-qubit systems. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: 21 pages including supplementary information

Journal ref: Phys. Rev. Applied 13, 024016 (2020)

Spin Readout Techniques of the Nitrogen-Vacancy Center in Diamond

Authors: David A. Hopper, Henry J. Shulevitz, Lee C. Bassett

Abstract: The diamond nitrogen-vacancy (NV) center is a leading platform for quantum information science due to its optical addressability and room-temperature spin coherence. However, measurements of the NV center's spin state typically require averaging over many cycles to overcome noise. Here, we review several approaches to improve the readout performance and highlight future avenues of research that co… ▽ More The diamond nitrogen-vacancy (NV) center is a leading platform for quantum information science due to its optical addressability and room-temperature spin coherence. However, measurements of the NV center's spin state typically require averaging over many cycles to overcome noise. Here, we review several approaches to improve the readout performance and highlight future avenues of research that could enable single-shot electron-spin readout at room temperature. △ Less

Submitted 24 September, 2018; v1 submitted 13 September, 2018; originally announced September 2018.

Comments: 21 pages, 7 figures

Journal ref: Micromachines 9, 437 (2018)

Spin-Dependent Quantum Emission in Hexagonal Boron Nitride at Room Temperature

Authors: Annemarie L. Exarhos, David A. Hopper, Raj N. Patel, Marcus W. Doherty, Lee C. Bassett

Abstract: Optically addressable spins associated with defects in wide-bandgap semiconductors are versatile platforms for quantum information processing and nanoscale sensing, where spin-dependent inter-system crossing (ISC) transitions facilitate optical spin initialization and readout. Recently, the van der Waals material hexagonal boron nitride (h-BN) has emerged as a robust host for quantum emitters (QEs… ▽ More Optically addressable spins associated with defects in wide-bandgap semiconductors are versatile platforms for quantum information processing and nanoscale sensing, where spin-dependent inter-system crossing (ISC) transitions facilitate optical spin initialization and readout. Recently, the van der Waals material hexagonal boron nitride (h-BN) has emerged as a robust host for quantum emitters (QEs), but spin-related effects have yet to be observed. Here, we report room-temperature observations of strongly anisotropic photoluminescence (PL) patterns as a function of applied magnetic field for select QEs in h-BN. Field-dependent variations in the steady-state PL and photon emission statistics are consistent with an electronic model featuring a spin-dependent ISC between triplet and singlet manifolds, indicating that optically-addressable spin defects are present in h-BN $-$ a versatile two-dimensional material promising efficient photon extraction, atom-scale engineering, and the realization of spin-based quantum technologies using van der Waals heterostructures. △ Less

Submitted 24 April, 2018; originally announced April 2018.

Comments: 38 pages, 34 figures

Journal ref: Nature Communications 10, 222 (2019)

Fabrication of (111)-Faced Single-Crystal Diamond Plates by Laser Nucleated Cleaving

Authors: Samuel M. Parks, Richard R. Grote, David A. Hopper, Lee C. Bassett

Abstract: Single-crystal diamond plates with surfaces oriented in a (111) crystal plane are required for high-performance solid-state device platforms ranging from power electronics to quantum information processing architectures. However, producing plates with this orientation has proven challenging. In this paper, we demonstrate a method for reliably and precisely fabricating (111)-faced plates from comme… ▽ More Single-crystal diamond plates with surfaces oriented in a (111) crystal plane are required for high-performance solid-state device platforms ranging from power electronics to quantum information processing architectures. However, producing plates with this orientation has proven challenging. In this paper, we demonstrate a method for reliably and precisely fabricating (111)-faced plates from commercially available, chemical-vapor-deposition-grown, type-IIa single-crystal diamond substrates with (100) faces. Our method uses a nanosecond-pulsed visible laser to nucleate and propagate a mechanical cleave in a chosen (111) crystal plane, resulting in faces as large as 3.0 mm$\times$0.3 mm with atomically flat surfaces, negligible miscut angles, and near zero kerf loss. We discuss the underlying physical mechanisms of the process along with potential improvements that will enable the production of millimeter-scale (111)-faced single-crystal diamond plates for a variety of emerging devices and applications. △ Less

Submitted 11 December, 2017; originally announced December 2017.

Comments: 11 pages, 10 figures, 2 tables

Journal ref: Diamond and Related Materials 84, 20 (2018)

Imaging a Nitrogen-Vacancy Center with a Diamond Immersion Metalens

Authors: Richard R. Grote, Tzu-Yung Huang, Sander A. Mann, David A. Hopper, Annemarie L. Exarhos, Gerald G. Lopez, Erik C. Garnett, Lee C. Bassett

Abstract: Solid-state quantum emitters have emerged as robust single-photon sources and addressable spins: key components in rapidly develo** quantum technologies for broadband magnetometry, biological sensing, and quantum information science. Performance in these applications, be it magnetometer sensitivity or quantum key generation rate, is limited by the number of photons detected. However, efficient c… ▽ More Solid-state quantum emitters have emerged as robust single-photon sources and addressable spins: key components in rapidly develo** quantum technologies for broadband magnetometry, biological sensing, and quantum information science. Performance in these applications, be it magnetometer sensitivity or quantum key generation rate, is limited by the number of photons detected. However, efficient collection of a quantum emitter's photoluminescence (PL) is challenging as its atomic scale necessitates diffraction-limited imaging with nanometer-precision alignment, oftentimes at cryogenic temperatures. In this letter, we image an individual quantum emitter, an isolated nitrogen-vacancy (NV) center in diamond, using a dielectric metalens composed of subwavelength pillars etched into the diamond's surface. The metalens eliminates the need for an objective by operating as a high-transmission-efficiency immersion lens with a numerical aperture (NA) greater than 1.0. This design provides a scalable approach for fiber coupling solid-state quantum emitters that will enable the development of deployable quantum devices. △ Less

Submitted 2 November, 2017; originally announced November 2017.

Comments: 28 pages, 17 figures

Journal ref: Nature Communications 10, 2392 (2019)

Amplified Sensitivity of Nitrogen-Vacancy Spins in Nanodiamonds using All-Optical Charge Readout

Authors: David A. Hopper, Richard R. Grote, Samuel M. Parks, Lee C. Bassett

Abstract: Nanodiamonds containing nitrogen-vacancy (NV) centers offer a versatile platform for sensing applications spanning from nanomagnetism to in-vivo monitoring of cellular processes. In many cases, however, weak optical signals and poor contrast demand long acquisition times that prevent the measurement of environmental dynamics. Here, we demonstrate the ability to perform fast, high-contrast optical… ▽ More Nanodiamonds containing nitrogen-vacancy (NV) centers offer a versatile platform for sensing applications spanning from nanomagnetism to in-vivo monitoring of cellular processes. In many cases, however, weak optical signals and poor contrast demand long acquisition times that prevent the measurement of environmental dynamics. Here, we demonstrate the ability to perform fast, high-contrast optical measurements of charge distributions in ensembles of NV centers in nanodiamonds and use the technique to improve the spin readout signal-to-noise ratio through spin-to-charge conversion. A study of 38 nanodiamonds, each hosting 10-15 NV centers with an average diameter of 40 nm, uncovers complex, multiple-timescale dynamics due to radiative and non-radiative ionization and recombination processes. Nonetheless, the nanodiamonds universally exhibit charge-dependent photoluminescence contrasts and the potential for enhanced spin readout using spin-to-charge conversion. We use the technique to speed up a $T_1$ relaxometry measurement by a factor of five. △ Less

Submitted 1 September, 2017; originally announced September 2017.

Comments: 13 pages, 14 figures

Journal ref: ACS Nano, Article ASAP (2018)

Optical Signatures of Quantum Emitters in Suspended Hexagonal Boron Nitride

Authors: Annemarie L. Exarhos, David A. Hopper, Richard R. Grote, Audrius Alkauskas, Lee C. Bassett

Abstract: Hexagonal boron nitride (h-BN) is a tantalizing material for solid-state quantum engineering. Analogously to three-dimensional wide-bandgap semiconductors like diamond, h-BN hosts isolated defects exhibiting visible fluorescence, and the ability to position such quantum emitters within a two-dimensional material promises breakthrough advances in quantum sensing, photonics, and other quantum techno… ▽ More Hexagonal boron nitride (h-BN) is a tantalizing material for solid-state quantum engineering. Analogously to three-dimensional wide-bandgap semiconductors like diamond, h-BN hosts isolated defects exhibiting visible fluorescence, and the ability to position such quantum emitters within a two-dimensional material promises breakthrough advances in quantum sensing, photonics, and other quantum technologies. Critical to such applications, however, is an understanding of the physics underlying h-BN's quantum emission. We report the creation and characterization of visible single-photon sources in suspended, single-crystal, h-BN films. The emitters are bright and stable over timescales of several months in ambient conditions. With substrate interactions eliminated, we study the spectral, temporal, and spatial characteristics of the defects' optical emission, which offer several clues about their electronic and chemical structure. Analysis of the defects' spectra reveals similarities in vibronic coupling despite widely-varying fluorescence wavelengths, and a statistical analysis of their polarized emission patterns indicates a correlation between the optical dipole orientations of some defects and the primitive crystallographic axes of the single-crystal h-BN film. These measurements constrain possible defect models, and, moreover, suggest that several classes of emitters can exist simultaneously in free-standing h-BN, whether they be different defects, different charge states of the same defect, or the result of strong local perturbations. △ Less

Submitted 8 September, 2016; originally announced September 2016.

Journal ref: ACS Nano 11, 3328 (2017)

Near-Infrared-Assisted Charge Control and Spin Readout of the Nitrogen-Vacancy Center in Diamond

Authors: David A. Hopper, Richard R. Grote, Annemarie L. Exarhos, Lee C. Bassett

Abstract: We utilize nonlinear absorption to design all-optical protocols that improve both charge state initialization and spin readout for the nitrogen-vacancy (NV) center in diamond. Non-monotonic variations in the equilibrium charge state as a function of visible and near-infrared (NIR) optical power are attributed to competing multiphoton absorption processes. In certain regimes, multicolor illuminatio… ▽ More We utilize nonlinear absorption to design all-optical protocols that improve both charge state initialization and spin readout for the nitrogen-vacancy (NV) center in diamond. Non-monotonic variations in the equilibrium charge state as a function of visible and near-infrared (NIR) optical power are attributed to competing multiphoton absorption processes. In certain regimes, multicolor illumination enhances the steady-state population of the NV's negative charge state above 90%. At higher NIR intensities, selective ionization of the singlet manifold facilitates a protocol for spin-to-charge conversion that dramatically enhances the spin readout fidelity. We demonstrate a 6-fold increase in the signal-to-noise ratio for single-shot spin measurements and predict an orders-of-magnitude experimental speedup over traditional methods for emerging applications in magnetometry and quantum information science using NV spins. △ Less

Submitted 3 August, 2016; v1 submitted 21 June, 2016; originally announced June 2016.

Comments: 5 pages, 4 figures, plus supplement

Journal ref: Phys. Rev. B 94, 241201 (2016)