-
Mechanical Comparison of Arrangement Strategies for Topological Interlocking Assemblies
Authors:
Tom Goertzen,
Domen Macek,
Lukas Schnelle,
Meike Weiß,
Stefanie Reese,
Hagen Holthusen,
Alice C. Niemeyer
Abstract:
Topological Interlocking assemblies are arrangements of blocks kinematically constrained by a fixed frame, such that all rigid body motions of each block are constrained only by its permanent contact with other blocks and the frame. In the literature several blocks are introduced that can be arranged into different interlocking assemblies. In this study we investigate the influence of arrangement…
▽ More
Topological Interlocking assemblies are arrangements of blocks kinematically constrained by a fixed frame, such that all rigid body motions of each block are constrained only by its permanent contact with other blocks and the frame. In the literature several blocks are introduced that can be arranged into different interlocking assemblies. In this study we investigate the influence of arrangement on the overall structural behaviour of the resulting interlocking assemblies. This is performed using the Versatile Block, as it can be arranged in three different doubly periodic ways given by wallpaper symmetries. Our focus lies on the load transfer mechanisms from the assembly onto the frame. For fast a priori evaluation of the assemblies we introduce a combinatorial model called Interlocking Flows. To investigate our assemblies from a mechanical point of view we conduct several finite element studies. These reveal a strong influence of arrangement on the structural behaviour, for instance, an impact on both the point and amount of maximum deflection. The results of the finite element analysis are in very good agreement with the predictions of the Interlocking Flow model. Our source code, data and examples are available under https://doi.org/10.5281/zenodo.10246034.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
A comparative study of micromorphic gradient-extensions for anisotropic damage at finite strains
Authors:
Tim van der Velden,
Tim Brepols,
Stefanie Reese,
Hagen Holthusen
Abstract:
Modern inelastic material model formulations rely on the use of tensor-valued internal variables. When inelastic phenomena include softening, simulations of the former are prone to localization. Thus, an accurate regularization of the tensor-valued internal variables is essential to obtain physically correct results. Here, we focus on the regularization of anisotropic damage at finite strains. Thu…
▽ More
Modern inelastic material model formulations rely on the use of tensor-valued internal variables. When inelastic phenomena include softening, simulations of the former are prone to localization. Thus, an accurate regularization of the tensor-valued internal variables is essential to obtain physically correct results. Here, we focus on the regularization of anisotropic damage at finite strains. Thus, a flexible anisotropic damage model with isotropic, kinematic, and distortional hardening is equipped with three gradient-extensions using a full and two reduced regularizations of the damage tensor. Theoretical and numerical comparisons of the three gradient-extensions yield excellent agreement between the full and the reduced regularization based on a volumetric-deviatoric regularization using only two nonlocal degrees of freedom.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Theory and implementation of inelastic Constitutive Artificial Neural Networks
Authors:
Hagen Holthusen,
Lukas Lamm,
Tim Brepols,
Stefanie Reese,
Ellen Kuhl
Abstract:
Nature has always been our inspiration in the research, design and development of materials and has driven us to gain a deep understanding of the mechanisms that characterize anisotropy and inelastic behavior. All this knowledge has been accumulated in the principles of thermodynamics. Deduced from these principles, the multiplicative decomposition combined with pseudo potentials are powerful and…
▽ More
Nature has always been our inspiration in the research, design and development of materials and has driven us to gain a deep understanding of the mechanisms that characterize anisotropy and inelastic behavior. All this knowledge has been accumulated in the principles of thermodynamics. Deduced from these principles, the multiplicative decomposition combined with pseudo potentials are powerful and universal concepts. Simultaneously, the tremendous increase in computational performance enabled us to investigate and rethink our history-dependent material models to make the most of our predictions. Today, we have reached a point where materials and their models are becoming increasingly sophisticated. This raises the question: How do we find the best model that includes all inelastic effects to explain our complex data? Constitutive Artificial Neural Networks (CANN) may answer this question. Here, we extend the CANNs to inelastic materials (iCANN). Rigorous considerations of objectivity, rigid motion of the reference configuration, multiplicative decomposition and its inherent non-uniqueness, restrictions of energy and pseudo potential, and consistent evolution guide us towards the architecture of the iCANN satisfying thermodynamics per design. We combine feed-forward networks of the free energy and pseudo potential with a recurrent neural network approach to take time dependencies into account. We demonstrate that the iCANN is capable of autonomously discovering models for artificially generated data, the response of polymers for cyclic loading and the relaxation behavior of muscle data. As the design of the network is not limited to visco-elasticity, our vision is that the iCANN will reveal to us new ways to find the various inelastic phenomena hidden in the data and to understand their interaction. Our source code, data, and examples are available at doi.org/10.5281/zenodo.10066805
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Mechanical modeling of the maturation process for tissue-engineered implants: application to biohybrid heart valves
Authors:
Mahmoud Sesa,
Hagen Holthusen,
Lukas Lamm,
Christian Böhm,
Tim Brepols,
Stefan Jockenhövel,
Stefanie Reese
Abstract:
The development of tissue-engineered cardiovascular implants can improve the lives of large segments of our society who suffer from cardiovascular diseases. Regenerative tissues are fabricated using a process called tissue maturation. Furthermore, it is highly challenging to produce cardiovascular regenerative implants with sufficient mechanical strength to withstand the loading conditions within…
▽ More
The development of tissue-engineered cardiovascular implants can improve the lives of large segments of our society who suffer from cardiovascular diseases. Regenerative tissues are fabricated using a process called tissue maturation. Furthermore, it is highly challenging to produce cardiovascular regenerative implants with sufficient mechanical strength to withstand the loading conditions within the human body. Therefore, biohybrid implants for which the regenerative tissue is reinforced by standard reinforcement material (e.g. textile or 3d printed scaffold) can be an interesting solution. In silico models can significantly contribute to characterizing, designing, and optimizing biohybrid implants. The first step towards this goal is to develop a computational model for the maturation process of tissue-engineered implants. This paper focuses on the mechanical modeling of textile-reinforced tissue-engineered cardiovascular implants. First, we propose an energy-based approach to compute the collagen evolution during the maturation process. Then, we apply the concept of structural tensors to model the anisotropic behavior of the extracellular matrix and the textile scaffold. Next, the newly developed material model is embedded into a special solid-shell finite element formulation with reduced integration. Finally, we use our framework to compute two structural problems: a pressurized shell construct and a tubular-shaped heart valve. The results show the ability of the model to predict collagen growth in response to the boundary conditions applied during the maturation process. Consequently, we can predict the implant's mechanical response, such as the deformation and stresses of the implant.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
Multivariate Methods for Detection of Rubbery Rot in Storage Apples by Monitoring Volatile Organic Compounds: An Example of Multivariate Generalised Mixed Models
Authors:
J. S. Pelck,
H. Holthusen,
M. Edelenbos,
A. Luca,
R. Labouriau
Abstract:
This article is a case study illustrating the use of a multivariate statistical method for screening potential chemical markers for early detection of post-harvest disease in storage fruit. We simultaneously measure a range of volatile organic compounds (VOCs) and two measures of severity of disease infection in apples under storage: the number of apples presenting visible symptoms and the lesion…
▽ More
This article is a case study illustrating the use of a multivariate statistical method for screening potential chemical markers for early detection of post-harvest disease in storage fruit. We simultaneously measure a range of volatile organic compounds (VOCs) and two measures of severity of disease infection in apples under storage: the number of apples presenting visible symptoms and the lesion area. We use multivariate generalised linear mixed models (MGLMM) for studying association patterns of those simultaneously observed responses via the covariance structure of random components. Remarkably, those MGLMMs can be used to represent patterns of association between quantities of different statistical nature. In the particular example considered in this paper, there are positive responses (concentrations of VOC, Gamma distribution based models), positive responses possibly containing observations with zero values (lesion area, Compound Poisson distribution based models) and binomially distributed responses (proportion of apples presenting infection symptoms). We represent patterns of association inferred with the MGLMMs using graphical models (a network represented by a graph), which allow us to eliminate spurious associations due to a cascade of indirect correlations between the responses.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
A macroscopic approach for stress driven anisotropic growth in bioengineered soft tissues
Authors:
L. Lamm,
H. Holthusen,
T. Brepols,
S. Jockenhövel,
S. Reese
Abstract:
The simulation of growth processes within soft biological tissues is of utmost importance for many applications in the medical sector. Within this contribution we propose a new macroscopic approach fro modelling stress-driven volumetric growth occurring in soft tissues. Instead of using the standard approach of a-priori defining the structure of the growth tensor, we postulate the existance of a g…
▽ More
The simulation of growth processes within soft biological tissues is of utmost importance for many applications in the medical sector. Within this contribution we propose a new macroscopic approach fro modelling stress-driven volumetric growth occurring in soft tissues. Instead of using the standard approach of a-priori defining the structure of the growth tensor, we postulate the existance of a general growth potential. Such a potential describes all eligable homeostatic stress states that can ultimately be reached as a result of the growth process. Making use of well established methods from visco-plasticity, the evolution of the growth related right Cauchy-Green tensor is subsequently defined as a time dependent associative evolution law with respect to the introduced potential. This approach naturally leads to a formulation that is able to cover both, isotropic and anisotropic growth related changes in geometry. It furthermore allows the model to flexibly adapt to changing boundary and loading conditions. Besides the theoretical development, we also describe the algorithmic implementation and furthermore compare the newly derived model with a standard formulation of isotropic growth.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
