-
Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe
Authors:
Alexandra B. Artusio-Glimpse,
David A. Long,
Sean M. Bresler,
Nikunjkumar Prajapati,
Dangka Shylla,
Andrew P. Rotunno,
Matthew T. Simons,
Samuel Berweger,
Noah Schlossberger,
Thomas W. LeBrun,
Christopher L. Holloway
Abstract:
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Independent Rydberg Atom Sensing using a Dual-Ladder Scheme
Authors:
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Nikunjkumar Prajapati,
Andrew P. Rotunno,
Noah Schlossberger,
Dangka Shylla,
Kaitlin R. Moore,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schem…
▽ More
Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry
Authors:
Nikunjkumar Prajapati,
Samuel Berweger,
Andrew P. Rotunno,
Alexandra B. Artusio-Glimpse,
Noah Schlossberger,
Dangka Shylla,
William J. Watterson,
Matthew T. Simons,
David LaMantia,
Eric B. Norrgard,
Stephen P. Eckel,
Christopher L. Holloway
Abstract:
We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium syst…
▽ More
We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Acceleration is the Key to Drag Reduction in Turbulent Flow
Authors:
Liuyang Ding,
Lena Sabidussi,
Brian C. Holloway,
Marcus Hultmark,
Alexander J. Smits
Abstract:
A turbulent pipe flow experiment was conducted where the surface of the pipe was oscillated azimuthally over a wide range of frequencies, amplitudes and Reynolds number. The drag was reduced by as much as 30\%. Past work has suggested that the drag reduction scales with the velocity amplitude of the motion, its period, or the Reynolds number. Here, we find that the key parameter is simply the acce…
▽ More
A turbulent pipe flow experiment was conducted where the surface of the pipe was oscillated azimuthally over a wide range of frequencies, amplitudes and Reynolds number. The drag was reduced by as much as 30\%. Past work has suggested that the drag reduction scales with the velocity amplitude of the motion, its period, or the Reynolds number. Here, we find that the key parameter is simply the acceleration, which reduces the complexity of the phenomenon by two orders of magnitude. This insight opens new potential avenues for reducing fuel consumption by large vehicles and for reducing energy costs in large pi** systems.
△ Less
Submitted 3 February, 2024; v1 submitted 19 December, 2023;
originally announced December 2023.
-
Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment
Authors:
Noah Schlossberger,
Andrew P. Rotunno,
Aly Artusio-Glimpse,
Nikunjkumar Prajapati,
Samuel Berweger,
Dangka Shylla,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic fie…
▽ More
Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light.
△ Less
Submitted 27 November, 2023; v1 submitted 13 November, 2023;
originally announced November 2023.
-
High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band
Authors:
Nikunjkumar Prajapati,
Jakob W. Kunzler,
Alexandra B. Artusio-Glimpse,
Andrew Rotunno,
Samuel Berweger,
Matthew T. Simons,
Christopher L. Holloway,
Chad M. Gardner,
Michael S. Mcbeth,
Robert A. Younts
Abstract:
Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification…
▽ More
Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
Pixelated Interactions: Exploring Pixel Art for Graphical Primitives on a Tactile Display
Authors:
Tigmanshu Bhatnagar,
Vikas Upadhyay,
Anchal Sharma,
P V Madhusudhan Rao,
Mark Miodownik,
Nicolai Marquardt,
Catherine Holloway
Abstract:
Two-dimensional pin array tactile displays enable access to tactile graphics that are important for the education of students with visual impairments. Due to their prohibitive cost, limited access, and limited research within HCI, the rules to design graphical primitives on these low-resolution tactile displays are unclear. In this paper, eight tactile readers with visual impairments qualitatively…
▽ More
Two-dimensional pin array tactile displays enable access to tactile graphics that are important for the education of students with visual impairments. Due to their prohibitive cost, limited access, and limited research within HCI, the rules to design graphical primitives on these low-resolution tactile displays are unclear. In this paper, eight tactile readers with visual impairments qualitatively evaluate the implementation of Pixel Art to create tactile graphical primitives on a pin array display. Every pin of the pin array is assumed to be a pixel on a pixel grid. Our findings suggest that Pixel Art tactile graphics on a pin array are clear and comprehensible to tactile readers, positively confirming its use to design basic tactile shapes and line segments. The guidelines provide a framework to create tactile media which implies that the guidelines can be used to downsize basic shapes for refreshable pin-array displays.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields
Authors:
Maitreyi Jayaseelan,
Andrew P. Rotunno,
Nikunjkumar Prajapati,
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fi…
▽ More
We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations
Authors:
Andrew P. Rotunno,
Amy K. Robinson,
Nikunjkumar Prajapati,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway
Abstract:
We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss e…
▽ More
We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms
Authors:
Andrew P. Rotunno,
Samuel Berweger,
Nikunjkumar Prajapati,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway,
Maitreyi Jayaseelan,
Robert M. Potvliege,
C. S. Adams
Abstract:
Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF fie…
▽ More
Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range.
△ Less
Submitted 21 April, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry
Authors:
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Andrew P. Rotunno,
Nikunjkumar Prajapati,
Joseph D. Christesen,
Kaitlin R. Moore,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydbe…
▽ More
Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations.
△ Less
Submitted 28 July, 2023; v1 submitted 30 November, 2022;
originally announced December 2022.
-
Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry
Authors:
Nikunjkumar Prajapati,
Narayan Bhusal,
Andrew P. Rotunno,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Ying Ju Wang,
Eric Bottomley,
Haoquan Fan,
Christopher L. Holloway
Abstract:
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r…
▽ More
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement.
△ Less
Submitted 23 November, 2022; v1 submitted 21 November, 2022;
originally announced November 2022.
-
Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing
Authors:
Samuel Berweger,
Nikunjkumar Prajapati,
Alexandra B. Artusio-Glimpse,
Andrew P. Rotunno,
Roger Brown,
Christopher L. Holloway,
Matthew T. Simons,
Eric Imhof,
Steven R. Jefferts,
Baran N. Kayim,
Michael A. Viray,
Robert Wyllie,
Brian C. Sawyer,
Thad G. Walker
Abstract:
On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing.…
▽ More
On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
Modeling Line Broadening and Distortion Due to Spatially Non-Uniform Fields in Rydberg Electrometry
Authors:
Andrew P. Rotunno,
Amy K. Robinson,
Samuel Berweger,
Nukunjkumar Prajapati,
Alexandra B. Artusio-Glimpse,
Matthew Simons,
Christopher L. Holloway
Abstract:
We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The method…
▽ More
We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The methodology can be easily applied to other non-uniform optical parameters when monitoring total spectral transmission or phase delay. Field non-uniformity is present in standing waves of unmatched waveguides and glass vapor cells, which are generally due to source characteristics and environmental reflections. We present broadening and distortion effects caused by various types of electric-field distributions, and compare this model to results obtained from measured atomic spectra.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
TV and Video Game Streaming with a Quantum Receiver: A Study on a Rydberg atom-based receivers bandwidth and reception clarity
Authors:
Nikunjkumar Prajapati,
Andrew Rotunno,
Samuel Berweger,
Matt Simons,
Aly Artusio-Glimpse,
Christopher L. Holloway
Abstract:
We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average t…
▽ More
We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average time the atoms remain in the interaction volume, which is inversely proportional to the bandwidth of the receiver. We find that small beam diameters (less than 100 μm) lead to much faster responses and allow for color reception. We demonstrate the effect of beam size on bandwidth by receiving a live 480i video stream with the Rydberg atom receiver. The best fidelity was achieved with a beam width of 85 μm full-width at half-max.
△ Less
Submitted 11 May, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Rydberg atom-based field sensing enhancement using a split-ring resonator
Authors:
Christopher L. Holloway,
Nikunjkumar Prajapati,
Alexandra B. Artusio-Glimpse,
Samuel Berweger,
Yoshiaki Kasahara,
Andrea Alu,
Richard W. Ziolkowski
Abstract:
We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-fi…
▽ More
We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter-Townes splitting, E-field measurements down to 5~mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500~mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for the a sensitivity of 5.5~$μ$V/m$\sqrt{\rm Hz}$, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Could AI Democratise Education? Socio-Technical Imaginaries of an EdTech Revolution
Authors:
Sahan Bulathwela,
María Pérez-Ortiz,
Catherine Holloway,
John Shawe-Taylor
Abstract:
Artificial Intelligence (AI) in Education has been said to have the potential for building more personalised curricula, as well as democratising education worldwide and creating a Renaissance of new ways of teaching and learning. Millions of students are already starting to benefit from the use of these technologies, but millions more around the world are not. If this trend continues, the first de…
▽ More
Artificial Intelligence (AI) in Education has been said to have the potential for building more personalised curricula, as well as democratising education worldwide and creating a Renaissance of new ways of teaching and learning. Millions of students are already starting to benefit from the use of these technologies, but millions more around the world are not. If this trend continues, the first delivery of AI in Education could be greater educational inequality, along with a global misallocation of educational resources motivated by the current technological determinism narrative. In this paper, we focus on speculating and posing questions around the future of AI in Education, with the aim of starting the pressing conversation that would set the right foundations for the new generation of education that is permeated by technology. This paper starts by synthesising how AI might change how we learn and teach, focusing specifically on the case of personalised learning companions, and then move to discuss some socio-technical features that will be crucial for avoiding the perils of these AI systems worldwide (and perhaps ensuring their success). This paper also discusses the potential of using AI together with free, participatory and democratic resources, such as Wikipedia, Open Educational Resources and open-source tools. We also emphasise the need for collectively designing human-centered, transparent, interactive and collaborative AI-based algorithms that empower and give complete agency to stakeholders, as well as support new emerging pedagogies. Finally, we ask what would it take for this educational revolution to provide egalitarian and empowering access to education, beyond any political, cultural, language, geographical and learning ability barriers.
△ Less
Submitted 3 December, 2021;
originally announced December 2021.
-
Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements
Authors:
Christopher L. Holloway,
Nikunjkumar Prajapati,
John Kitching,
Jeffery A. Sherman,
Carson Teale,
Alain Rufenacht,
Alexandra B. Artusio-Glimpse,
Matthew T. Simons,
Amy K. Robinson,
Eric B. Norrgard
Abstract:
We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow…
▽ More
We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user.
△ Less
Submitted 22 October, 2021; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repum**
Authors:
Nikunjkumar Prajapati,
Amy K. Robinson,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway
Abstract:
We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly doubl…
▽ More
We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repum** field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Inverse Optimization on Hierarchical Networks: An Application to Breast Cancer Clinical Pathways
Authors:
Timothy C. Y. Chan,
Katharina Forster,
Steven Habbous,
Claire Holloway,
Luciano Ieraci,
Yusuf Shalaby,
Nasrin Yousefi
Abstract:
Clinical pathways are standardized processes that outline the steps required for managing a specific disease. However, patient pathways often deviate from clinical pathways. Measuring the concordance of patient pathways to clinical pathways is important for health system monitoring and informing quality improvement initiatives. In this paper, we develop an inverse optimization-based approach to me…
▽ More
Clinical pathways are standardized processes that outline the steps required for managing a specific disease. However, patient pathways often deviate from clinical pathways. Measuring the concordance of patient pathways to clinical pathways is important for health system monitoring and informing quality improvement initiatives. In this paper, we develop an inverse optimization-based approach to measuring pathway concordance in breast cancer, a complex disease. We capture this complexity in a hierarchical network that models the patient's journey through the health system. A novel inverse shortest path model is formulated and solved on this hierarchical network to estimate arc costs, which are used to form a concordance metric to measure the distance between patient pathways and shortest paths (i.e., clinical pathways). Using real breast cancer patient data from Ontario, Canada, we demonstrate that our concordance metric has a statistically significant association with survival for all breast cancer patient subgroups. We also use it to quantify the extent of patient pathway discordances across all subgroups, finding that patients undertaking additional clinical activities constitute the primary driver of discordance in the population.
△ Less
Submitted 12 May, 2022; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning
Authors:
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway,
Eric Imhof,
Steven R. Jefferts,
Robert Wyllie,
Brian C. Sawyer,
Thad G Walker
Abstract:
We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydber…
▽ More
We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Determining the Angle-of-Arrival of an Radio-Frequency Source with a Rydberg Atom-Based Sensor
Authors:
Amy K. Robinson,
Nikunjkumar Prajapati,
Damir Senic,
Matthew T. Simons,
Joshua A. Gordon,
Christopher L. Holloway
Abstract:
In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside…
▽ More
In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements to both full-wave simulation and to a plane-wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle-of-arrival of an RF field.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Blackbody Radiation Noise Broadening of Quantum Systems
Authors:
Eric B Norrgard,
Stephen P Eckel,
Christopher L Holloway,
Eric L Shirley
Abstract:
Precision measurements of quantum systems often seek to probe or must account for the interaction with blackbody radiation. Over the past several decades, much attention has been given to AC Stark shifts and stimulated state transfer. For a blackbody in thermodynamic equilibrium, these two effects are determined by the expectation value of photon number in each mode of the Planck spectrum. Here, w…
▽ More
Precision measurements of quantum systems often seek to probe or must account for the interaction with blackbody radiation. Over the past several decades, much attention has been given to AC Stark shifts and stimulated state transfer. For a blackbody in thermodynamic equilibrium, these two effects are determined by the expectation value of photon number in each mode of the Planck spectrum. Here, we explore how the photon number variance of an equilibrium blackbody generally leads to a parametric broadening of the energy levels of quantum systems that is inversely proportional to the square-root of the blackbody volume. We consider the the effect in two cases which are potentially highly sensitive to this broadening: Rydberg atoms and atomic clocks. We find that even in blackbody volumes as small as 1\,cm$^3$, this effect is unlikely to contribute meaningfully to transition linewidths.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Hearing through Vibrations: Perception of Musical Emotions by Profoundly Deaf People
Authors:
Anastasia Schmitz,
Catherine Holloway,
Youngjun Cho
Abstract:
Advances in tactile-audio feedback technology have created new possibilities for deaf people to feel music. However, little is known about deaf individuals' perception of musical emotions through vibrotactile feedback. In this paper, we present the findings from a mixed-methods study with 16 profoundly deaf participants. The study protocol was designed to explore how users of a backpack-style vibr…
▽ More
Advances in tactile-audio feedback technology have created new possibilities for deaf people to feel music. However, little is known about deaf individuals' perception of musical emotions through vibrotactile feedback. In this paper, we present the findings from a mixed-methods study with 16 profoundly deaf participants. The study protocol was designed to explore how users of a backpack-style vibrotactile display perceive intended emotions in twenty music excerpts. Quantitative analysis demonstrated that participants correctly identified happy and angry excerpts and rated them as more arousing than sad and peaceful excerpts. More positive emotions were experienced during happy compared to angry excerpts while peaceful and sad excerpts were hard to be differentiated. Based on qualitative data, we highlight the benefits and limitations of using vibrations to convey musical emotions to profoundly deaf users. Finally, we provide guidelines for designing accessible music experiences for the deaf community.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Quantum Blackbody Thermometry
Authors:
Eric B. Norrgard,
Stephen P. Eckel,
Christopher L. Holloway,
Eric L. Shirley
Abstract:
Blackbody radiation (BBR) sources are calculable radiation sources that are frequently used in radiometry, temperature dissemination, and remote sensing. Despite their ubiquity, blackbody sources and radiometers have a plethora of systematics. We envision a new, primary route to measuring blackbody radiation using ensembles of polarizable quantum systems, such as Rydberg atoms and diatomic molecul…
▽ More
Blackbody radiation (BBR) sources are calculable radiation sources that are frequently used in radiometry, temperature dissemination, and remote sensing. Despite their ubiquity, blackbody sources and radiometers have a plethora of systematics. We envision a new, primary route to measuring blackbody radiation using ensembles of polarizable quantum systems, such as Rydberg atoms and diatomic molecules. Quantum measurements with these exquisite electric field sensors could enable active feedback, improved design, and, ultimately, lower radiometric and thermal uncertainties of blackbody standards. A portable, calibration-free Rydberg-atom physics package could also complement a variety of classical radiation detector and thermometers. The successful merger of quantum and blackbody-based measurements provides a new, fundamental paradigm for blackbody physics.
△ Less
Submitted 9 January, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Atomic Spectra in a Six-Level Scheme for Electromagnetically Induced Transparency and Autler-Townes Splitting in Rydberg Atoms
Authors:
Amy K. Robinson,
Alexandra Artusio-Glimpse,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters.…
▽ More
We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters. We also present two theoretical models for this atomic system, where these two models capture different aspects of the observed spectra. One is a six-level model used to predict dominant spectral features and the other a more complex eight-level model used to predict the full characteristics of this system. Both models shows very good agreement with the experimental data.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
An Inverse Optimization Approach to Measuring Clinical Pathway Concordance
Authors:
Timothy C. Y. Chan,
Maria Eberg,
Katharina Forster,
Claire Holloway,
Luciano Ieraci,
Yusuf Shalaby,
Nasrin Yousefi
Abstract:
Clinical pathways outline standardized processes in the delivery of care for a specific disease. Patient journeys through the healthcare system, though, can deviate substantially from these pathways. Given the positive benefits of clinical pathways, it is important to measure the concordance of patient pathways so that variations in health system performance or bottlenecks in the delivery of care…
▽ More
Clinical pathways outline standardized processes in the delivery of care for a specific disease. Patient journeys through the healthcare system, though, can deviate substantially from these pathways. Given the positive benefits of clinical pathways, it is important to measure the concordance of patient pathways so that variations in health system performance or bottlenecks in the delivery of care can be detected, monitored, and acted upon. This paper proposes the first data-driven inverse optimization approach to measuring pathway concordance in any problem context. Our specific application considers clinical pathway concordance for stage III colon cancer. We develop a novel concordance metric and demonstrate using real patient data from Ontario, Canada that it has a statistically significant association with survival. Our methodological approach considers a patient's journey as a walk in a directed graph, where the costs on the arcs are derived by solving an inverse shortest path problem. The inverse optimization model uses two sources of information to find the arc costs: reference pathways developed by a provincial cancer agency (primary) and data from real-world patient-related activity from patients with both positive and negative clinical outcomes (secondary). Thus, our inverse optimization framework extends existing models by including data points of both varying "primacy" and "alignment". Data primacy is addressed through a two-stage approach to imputing the cost vector, while data alignment is addressed by a hybrid objective function that aims to minimize and maximize suboptimality error for different subsets of input data.
△ Less
Submitted 15 January, 2021; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Nose Heat: Exploring Stress-induced Nasal Thermal Variability through Mobile Thermal Imaging
Authors:
Youngjun Cho,
Nadia Bianchi-Berthouze,
Manuel Oliveira,
Catherine Holloway,
Simon Julier
Abstract:
Automatically monitoring and quantifying stress-induced thermal dynamic information in real-world settings is an extremely important but challenging problem. In this paper, we explore whether we can use mobile thermal imaging to measure the rich physiological cues of mental stress that can be deduced from a person's nose temperature. To answer this question we build i) a framework for monitoring n…
▽ More
Automatically monitoring and quantifying stress-induced thermal dynamic information in real-world settings is an extremely important but challenging problem. In this paper, we explore whether we can use mobile thermal imaging to measure the rich physiological cues of mental stress that can be deduced from a person's nose temperature. To answer this question we build i) a framework for monitoring nasal thermal variable patterns continuously and ii) a novel set of thermal variability metrics to capture a richness of the dynamic information. We evaluated our approach in a series of studies including laboratory-based psychosocial stress-induction tasks and real-world factory settings. We demonstrate our approach has the potential for assessing stress responses beyond controlled laboratory settings.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Expressive haptics for enhanced usability of mobile interfaces in situations of impairments
Authors:
Tigmanshu Bhatnagar,
Youngjun Cho,
Nicolai Marquardt,
Catherine Holloway
Abstract:
Designing for situational awareness could lead to better solutions for disabled people, likewise, exploring the needs of disabled people could lead to innovations that can address situational impairments. This in turn can create non-stigmatising assistive technology for disabled people from which eventually everyone could benefit. In this paper, we investigate the potential for advanced haptics to…
▽ More
Designing for situational awareness could lead to better solutions for disabled people, likewise, exploring the needs of disabled people could lead to innovations that can address situational impairments. This in turn can create non-stigmatising assistive technology for disabled people from which eventually everyone could benefit. In this paper, we investigate the potential for advanced haptics to compliment the graphical user interface of mobile devices, thereby enhancing user experiences of all people in some situations (e.g. sunlight interfering with interaction) and visually impaired people. We explore technical solutions to this problem space and demonstrate our justification for a focus on the creation of kinaesthetic force feedback. We propose initial design concepts and studies, with a view to co-create delightful and expressive haptic interactions with potential users motivated by scenarios of situational and permanent impairments.
△ Less
Submitted 12 April, 2019;
originally announced April 2019.
-
Quantum Physics Meets Music: A "Real-Time" Guitar Recording Using Rydberg-Atoms and Electromagnetically Induced Transparency
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Abdulaziz H. Haddab,
Carl J. Williams,
Maxwell W. Holloway
Abstract:
We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recordi…
▽ More
We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recording of each guitar separately. The approach shows how audio data (the musical composition) can be detected with a quantum system, illustrating how we can control ensembles of atoms to such an extent that we can use them in this "entertaining" example of recording a musical instrument.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Detecting and Receiving Phase Modulated Signals with a Rydberg Atom-Based Mixer
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Joshua A. Gordon,
David Novotny
Abstract:
Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of…
▽ More
Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of digital modulated signals based on various phase-shift keying approaches. We demonstrate Rydberg atom-based digital reception of binary phase-shift keying (BPSK), quadrature phase-shift keying (QPSK), and quadrature amplitude (QAM) modulated signals over a 19.626~GHz carrier to transmit and receive a bit stream in cesium vapor. We present measured values of Error Vector Magnitude (EVM, a common communication metric used to assess how accurate a symbol or bit stream is received) as a function of symbol rate for BPSK, QPSK, 16QAM, 32QAM, and 64QAM modulation schemes. These results allow us to discuss the bandwidth of a Rydberg-atom based receiver system.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Weak Electric-Field Detection with Sub-1 Hz Resolution at Radio Frequencies Using A Rydberg Atom-Based Mixer
Authors:
Joshua A. Gordon,
Matthew T. Simons,
Abdulaziz H. Haddab,
Christopher L. Holloway
Abstract:
Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus…
▽ More
Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus limiting the minimum detectable E-field. Here, we demonstrate using the Rydberg atoms as an RF mixer for weak E-field detection well below the AT regime with frequency discrimination better than 1 Hz resolution. Two E-fields incident on a vapor cell filled with cesium atoms are used. One E-field at 19.626000 GHz drives the 34D_(5/2)->5P_(3/2) Rydberg transition and acts as a local oscillator (LO) and a second signal E-field (Sig) of interest is at 19.626090 GHz. In the presence of the LO, the Rydberg atoms naturally down convert the Sig field to a 90 kHz intermediate frequency (IF) signal. This IF signal manifests as an oscillation in the probe laser intensity through the Rydberg vapor and is easily detected with a photodiode and lock-in amplifier. In the configuration used here, E-field strength down to ? 46 mV/m +/-2 mV/m were detected. Furthermore, neighboring fields 0.1 Hz away and equal in strength to Sig could be discriminated without any leakage into the lock-in signal. For signals 1 Hz away and as high as +60 dB above Sig, leakage into the lock-in signal could be kept below -3 dB.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
A Multiple-Band Rydberg-Atom Based Receiver/Antenna: AM/FM Stereo Reception
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Abdulaziz H. Haddab,
Joshua A. Gordon,
Stephen D. Voran
Abstract:
With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to…
▽ More
With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to develop atom-based receivers and antennas, which potentially have many benefits over conventional technologies in detecting and receiving modulated signals. In this paper, we demonstrate the ``first'' multi-channel atom-based reception of both amplitude (AM) and frequency (FM) modulation signals. We demonstrate this by using two different atomic species in order to detect and receive AM and FM modulated signals in stereo. Also, in this paper we investigate the effect of Gaussian noise on the ability to receive AM/FM signals. These results illustrate the multi-band (or multi-channel) receiving capability of a atom-based receiver/antenna to produce high fidelity stereo reception from both AM and FM signals. This paper shows an interesting way of applying the relatively newer (and something esoteric) field of quantum-optics and atomic-physics to the century old topic of radio reception.
△ Less
Submitted 2 March, 2019;
originally announced March 2019.
-
Retrieval Approach for Determining Surface Susceptibilities and Surface Porosities of a Symmetric Metascreen from Reflection and Transmission Coefficients
Authors:
Christopher L. Holloway,
Edward F. Kuester,
Abdulaziz H. Haddab
Abstract:
Recently we derived generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen (a metasurface with a ``fishnet'' structure, i.~e., a periodic array of arbitrary spaced apertures in a relatively impenetrable surface). The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which themselves are related…
▽ More
Recently we derived generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen (a metasurface with a ``fishnet'' structure, i.~e., a periodic array of arbitrary spaced apertures in a relatively impenetrable surface). The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which themselves are related to the geometry of the apertures that constitute the metascreen. In this paper, we use these GSTCs to derive the plane-wave reflection ($R$) and transmission ($T$) coefficients of a symmetric metascreen, expressed in terms of these surface parameters. From these equations, we develop a retrieval approach for determining the uniquely defined effective surface susceptibilities and surface porosities that characterize the metascreen from measured or simulated data for the $R$ and $T$ coefficients. We present the retrieved surface parameters for metascreens composed of five different types of apertures (circular holes, square holes, crosses, slots, and a square aperture filled with a high-contrast dielectric). The last example exhibits interesting resonances at frequencies where no resonances exist when the aperture is not filled, which opens up the possibility of designing metasurfaces with unique filtering properties. The retrieved surface parameters are validated by comparing them to other approaches.
△ Less
Submitted 22 February, 2019;
originally announced February 2019.
-
Numerical methods for entrainment and detrainment in the multi-fluid Euler equations for convection
Authors:
William A McIntyre,
Hilary Weller,
Christopher E Holloway
Abstract:
Convection schemes are a large source of error in global weather and climate models, and modern resolutions are often too fine to parameterise convection but are still too coarse to fully resolve it. Recently, numerical solutions of multi-fluid equations have been proposed for a more flexible and consistent treatment of sub-grid scale convection, including net mass transport by convection and non-…
▽ More
Convection schemes are a large source of error in global weather and climate models, and modern resolutions are often too fine to parameterise convection but are still too coarse to fully resolve it. Recently, numerical solutions of multi-fluid equations have been proposed for a more flexible and consistent treatment of sub-grid scale convection, including net mass transport by convection and non-equilibrium dynamics. The technique involves splitting the atmosphere into multiple fluids. For example, the atmosphere could be divided into buoyant updrafts and stable regions. The fluids interact through a common pressure, drag and mass transfers (entrainment and detrainment). Little is known about the numerical properties of mass transfer terms between the fluids. We derive mass transfer terms which relabel the fluids and derive numerical properties of the transfer schemes, including boundedness, momentum conservation and energy conservation. Numerical solutions of the multi-fluid Euler equations using a C-grid are presented using stable and unstable treatments of the transfers on a well-resolved two-fluid dry convection test case. We find two schemes which are conservative, stable and bounded for large timesteps, and maintain their numerical properties on staggered grids.
△ Less
Submitted 10 October, 2019; v1 submitted 13 February, 2019;
originally announced February 2019.
-
A New Quantum-Based Power Standard: Using Rydberg Atoms for a SI-Traceable Radio-Frequency Power Measurement Technique in Rectangular Waveguides
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Marcus D. Kautz,
Abdulaziz H. Haddab,
Joshua A. Gordon,
Thomas P. Crowley
Abstract:
In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carri…
▽ More
In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carried by the wave is then related to this measured E-field, which leads to a new direct International System of Units (SI) measurement of RF power. To demonstrate this approach, we first measure the field distribution of the fundamental mode in the waveguide and then measure the power carried by the wave at both 19.629 GHz and 26.526 GHz. We obtain good agreement between the power measurements obtained with this new technique and those obtained with a conventional power meter.
△ Less
Submitted 22 June, 2018; v1 submitted 18 June, 2018;
originally announced June 2018.
-
High-resolution antenna near-field imaging and sub-THz measurements with a small atomic vapor-cell sensing element
Authors:
David A. Anderson,
Eric Paradis,
Georg Raithel,
Rachel E. Sapiro,
Christopher L. Holloway
Abstract:
Atomic sensing and measurement of millimeter-wave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the ra…
▽ More
Atomic sensing and measurement of millimeter-wave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the radiation pattern of a K$_u$-band horn antenna at 13.49 GHz. We image fields at a spatial resolution of $λ/10$ and measure over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg resonance. The same atomic sensing element is used to measure sub-THz electric fields at 255 GHz, an increase in mmW-frequency by more than one order of magnitude. The sub-THz field is measured over a continuous $\pm$100 MHz frequency band using a near-resonant mmW atomic transition.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Measurement of Radio-Frequency Radiation Pressure
Authors:
Alexandra Artusio-Glimpse,
Matt T. Simons,
Ivan Ryger,
Marc Kautz,
John Lehman,
Christopher L. Holloway
Abstract:
We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a p…
▽ More
We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a power measure traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we demonstrate the ability to measure the radiation pressure/force carried in a field at 15~GHz.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
-
Quantum-optical spectroscopy for plasma electric field measurements and diagnostics
Authors:
David A. Anderson,
Georg Raithel,
Matthew Simons,
Christopher L. Holloway
Abstract:
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagneticall…
▽ More
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of plasma-embedded Rydberg atoms, which serve as highly-sensitive field sensors with a large dynamic range. The method is applied in diagnostics of plasmas photo-excited out of a cesium vapor. The plasma electric fields are extracted from spatially-resolved measurements of field-induced shape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas.
△ Less
Submitted 23 December, 2017;
originally announced December 2017.
-
Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) splitting in the Presence of Band-Limited White Gaussian Noise
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Marcus D. Kautz,
David A. Anderson,
Georg Raithel,
Daniel Stack,
Marc C. St. John,
Wansheng Su
Abstract:
We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups…
▽ More
We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups around the world as a means to develop a new SI traceable RF E-field measurement technique. For this to be a useful technique, it is important to understand the influence of BLWGN. We perform EIT/AT based E-field experiments with BLWGN centered on the RF transition frequency and for the BLWGN blue-shifted and red-shifted relative to the RF transition frequency. The EIT signal can be severely distorted for certain noise conditions (band-width, center-frequency, and noise power), hence altering the ability to accurately measure a CW RF E-field strength. We present a model to predict the changes in the EIT signal in the presence of noise. This model includes AC Stark shifts and on resonance transitions associated with the noise source. The results of this model are compared to the experimental data and we find very good agreement between the two.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Generalized Sheet Transition Conditions (GSTCs) for a Metascreen -- A Fishnet Metasurface
Authors:
Christopher L. Holloway,
Edward F. Kuester
Abstract:
We used a multiple-scale homogenization method to derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen---a metasurface with a "fishnet" structure. These surfaces are characterized by periodically-spaced arbitrary-shaped apertures in an otherwise relatively impenetrable surface. The parameters in these GSTCs are interpreted as effective su…
▽ More
We used a multiple-scale homogenization method to derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen---a metasurface with a "fishnet" structure. These surfaces are characterized by periodically-spaced arbitrary-shaped apertures in an otherwise relatively impenetrable surface. The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which are related to the geometry of the apertures that constitute the metascreen. Finally, we emphasize the subtle but important difference between the GSTCs required for metascreens and those required for metafilms (a metasurface with a "cermet" structure, i.e., an array of isolated (non-touching) scatterers).
△ Less
Submitted 22 October, 2017;
originally announced October 2017.
-
Linear Rayleigh-Bénard stability of a transversely-isotropic fluid
Authors:
Craig R. Holloway,
David J. Smith,
Rosemary J. Dyson
Abstract:
Suspended fibres significantly alter fluid rheology, as exhibited in for example solutions of DNA, RNA and synthetic biological nanofibres. It is of interest to determine how this altered rheology affects flow stability. Motivated by the fact thermal gradients may occur in biomolecular analytic devices, and recent stability results, we examine the problem of Rayleigh-Bénard convection of the trans…
▽ More
Suspended fibres significantly alter fluid rheology, as exhibited in for example solutions of DNA, RNA and synthetic biological nanofibres. It is of interest to determine how this altered rheology affects flow stability. Motivated by the fact thermal gradients may occur in biomolecular analytic devices, and recent stability results, we examine the problem of Rayleigh-Bénard convection of the transversely-isotropic fluid of Ericksen. A transversely-isotropic fluid treats these suspensions as a continuum with an evolving preferred direction, through a modified stress tensor incorporating four viscosity-like parameters. We consider the linear stability of a stationary, passive, transversely-isotropic fluid contained between two parallel boundaries, with the lower boundary at a higher temperature than the upper. To determine the marginal stability curves the Chebyshev collocation method is applied, and we consider a range of initially uniform preferred directions, from horizontal to vertical, and three orders of magnitude in the viscosity-like anisotropic parameters. Determining the critical wave and Rayleigh numbers we find that transversely-isotropic effects delay the onset of instability; this effect is felt most strongly through the incorporation of the anisotropic shear viscosity, although the anisotropic extensional viscosity also contributes. Our analysis confirms the importance of anisotropic rheology in the setting of convection.
△ Less
Submitted 4 August, 2017;
originally announced August 2017.
-
Simultaneous Use of Cs and Rb Rydberg Atoms for Independent RF Electric Field Measurements via Electromagnetically Induced Transparency
Authors:
Matt T. Simons,
Joshua A. Gordon,
Christopher L. Holloway
Abstract:
We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurem…
▽ More
We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurement. We show that these two systems can detect the same the RF E-field strength simultaneously, which provides a direct in situ comparison of Rb and Cs RF measurements in Rydberg atoms. In effect, this allows us to perform two independent measurements of the same quantity in the same laboratory, providing two different immediate and independent measurements. This gives two measurements that helps rule out systematic effects and uncertainties in this E-field metrology approach, which are important when establishing an international measurement standard for an E-field strength and is a necessary step for this method to be accepted as a standard calibration technique. We use this approach to measure E-fields at 9.2~GHz, 11.6~GHz, and 13.4~GHz, which correspond to three different atomic states (different principal atomic numbers and angular momentums) for the two atom species.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Influences of transversely-isotropic rheology and translational diffusion on the stability of active suspensions
Authors:
Craig R. Holloway,
Gemma Cupples,
David J. Smith,
J. Edward F. Green,
Richard J. Clarke,
Rosemary J. Dyson
Abstract:
Suspensions of self-motile, elongated particles are a topic of significant current interest, exemplifying a form of `active matter'. Examples include self-propelling bacteria, algae and sperm, and artificial swimmers. Ericksen's model of a transversely-isotropic fluid [J. L. Ericksen, Colloid Polym. Sci. 173(2):117-122 (1960)] treats suspensions of non-motile particles as a continuum with an evolv…
▽ More
Suspensions of self-motile, elongated particles are a topic of significant current interest, exemplifying a form of `active matter'. Examples include self-propelling bacteria, algae and sperm, and artificial swimmers. Ericksen's model of a transversely-isotropic fluid [J. L. Ericksen, Colloid Polym. Sci. 173(2):117-122 (1960)] treats suspensions of non-motile particles as a continuum with an evolving preferred direction; this model describes fibrous materials as diverse as extracellular matrix, textile tufts and plant cell walls. Director-dependent effects are incorporated through a modified stress tensor with four viscosity-like parameters. By making fundamental connections with recent models for active suspensions, we propose a modification to Ericksen's model, mainly the inclusion of self motility; this can be considered the simplest description of an oriented suspension including transversely-isotropic effects. Motivated by the fact that transversely-isotropic fluids exhibit modified flow stability, we conduct a linear stability analysis of two distinct cases, aligned and isotropic suspensions of elongated active particles. Novel aspects include the anisotropic rheology and translational diffusion. In general anisotropic effects increase the instability of small perturbations, whilst translational diffusion stabilises a range of wave-directions and, in some cases, a finite range of wave-numbers, thus emphasising that both anisotropy and translational diffusion can have important effects in these systems.
△ Less
Submitted 3 August, 2017; v1 submitted 1 July, 2016;
originally announced July 2016.
-
A Homogenization Technique for Obtaining Generalized Sheet Transition Conditions (GSTCs) for a Metafilm Embedded in a Magneto-Dielectric Interface
Authors:
Christoper L. Holloway,
Edward F. Kuester
Abstract:
Using the multiple-scale homogenization method, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metafilm. The scatterers that compose the metafilm are of arbitrary shape and are embedded between two different magneto-dielectric media. The parameters in these boundary conditions are interpreted as effective electric and magnetic surface susce…
▽ More
Using the multiple-scale homogenization method, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metafilm. The scatterers that compose the metafilm are of arbitrary shape and are embedded between two different magneto-dielectric media. The parameters in these boundary conditions are interpreted as effective electric and magnetic surface susceptibilities, which themselves are related to the geometry of the scatterers that constitute the metafilm.
△ Less
Submitted 16 March, 2016;
originally announced March 2016.
-
Optical measurements of strong microwave fields with Rydberg atoms in a vapor cell
Authors:
David A. Anderson,
Stephanie A. Miller,
Joshua A. Gordon,
Miranda L. Butler,
Christopher L. Holloway,
Georg Raithel
Abstract:
We present a spectral analysis of Rydberg atoms in strong microwave fields using electromagnetically induced transparency (EIT) as an all-optical readout. The measured spectroscopic response enables optical, atom-based electric field measurements of high-power microwaves. In our experiments, microwaves are irradiated into a room-temperature rubidium vapor cell. The microwaves are tuned near the tw…
▽ More
We present a spectral analysis of Rydberg atoms in strong microwave fields using electromagnetically induced transparency (EIT) as an all-optical readout. The measured spectroscopic response enables optical, atom-based electric field measurements of high-power microwaves. In our experiments, microwaves are irradiated into a room-temperature rubidium vapor cell. The microwaves are tuned near the two-photon 65D-66D Rydberg transition and reach an electric field strength of 230V/m, about 20% of the microwave ionization threshold of these atoms. A Floquet treatment is used to model the Rydberg level energies and their excitation rates. We arrive at an empirical model for the field-strength distribution inside the spectroscopic cell that yields excellent overall agreement between the measured and calculated Rydberg EIT-Floquet spectra. Using spectral features in the Floquet maps we achieve an absolute strong-field measurement precision of 6%.
△ Less
Submitted 11 January, 2016;
originally announced January 2016.
-
Modelling afferent nerve responses to bladder filling
Authors:
Maryam Argungu,
Saziye Bayram,
Bindi Brook,
Buddhapriya Chakrabarti,
Richard H Clayton,
Donna M Daly,
Rosemary J Dyson,
Craig Holloway,
Varun Manhas,
Shailesh Naire,
Tom Shearer,
Radostin D. Simitev
Abstract:
A sensation of fullness in the bladder is a regular experience, yet the mechanisms that act to generate this sensation remain poorly understood. This is an important issue because of the clinical problems that can result when this system does not function properly. The aim of the study group activity was to develop mathematical models that describe the mechanics of bladder filling, and how stretch…
▽ More
A sensation of fullness in the bladder is a regular experience, yet the mechanisms that act to generate this sensation remain poorly understood. This is an important issue because of the clinical problems that can result when this system does not function properly. The aim of the study group activity was to develop mathematical models that describe the mechanics of bladder filling, and how stretch modulates the firing rate of afferent nerves. Several models were developed, which were qualitatively consistent with experimental data obtained from a mouse model.
△ Less
Submitted 11 October, 2015;
originally announced October 2015.
-
Free-space quantum key distribution to a moving receiver
Authors:
Jean-Philippe Bourgoin,
Brendon L. Higgins,
Nick Gigov,
Catherine Holloway,
Christopher J. Pugh,
Sarah Kaiser,
Miles Cranmer,
Thomas Jennewein
Abstract:
Technological realities limit terrestrial quantum key distribution (QKD) to single-link distances of a few hundred kilometers. One promising avenue for global-scale quantum communication networks is to use low-Earth-orbit satellites. Here we report the first demonstration of QKD from a stationary transmitter to a receiver platform traveling at an angular speed equivalent to a 600 km altitude satel…
▽ More
Technological realities limit terrestrial quantum key distribution (QKD) to single-link distances of a few hundred kilometers. One promising avenue for global-scale quantum communication networks is to use low-Earth-orbit satellites. Here we report the first demonstration of QKD from a stationary transmitter to a receiver platform traveling at an angular speed equivalent to a 600 km altitude satellite, located on a moving truck. We overcome the challenges of actively correcting beam pointing, photon polarization and time-of-flight. Our system generates an asymptotic secure key at 40 bits/s.
△ Less
Submitted 17 December, 2015; v1 submitted 1 May, 2015;
originally announced May 2015.
-
Millimeter Wave Detection via Autler-Townes Splitting in Rubidium Rydberg Atoms
Authors:
Joshua A. Gordon,
Christopher L. Holloway,
Andrew Schwarzkopf,
Dave A. Anderson,
Stephanie Miller,
Nithiwadee Thaicharoen,
Georg Raithel
Abstract:
In this paper we demonstrate the detection of millimeter waves via Autler-Townes splitting in 85Rb Rydberg atoms. This method may provide an independent, atom-based, SI-traceable method for measuring mm-wave electric fields, which addresses a gap in current calibration techniques in the mm-wave regime. The electric- field amplitude within a rubidium vapor cell in the WR-10 waveguide band is measur…
▽ More
In this paper we demonstrate the detection of millimeter waves via Autler-Townes splitting in 85Rb Rydberg atoms. This method may provide an independent, atom-based, SI-traceable method for measuring mm-wave electric fields, which addresses a gap in current calibration techniques in the mm-wave regime. The electric- field amplitude within a rubidium vapor cell in the WR-10 waveguide band is measured for frequencies of 93 GHz, and 104 GHz. Relevant aspects of Autler-Townes splitting originating from a four-level electromagnetically induced transparency scheme are discussed. We measure the E-field generated by an open-ended waveguide using this technique. Experimental results are compared to a full-wave finite element simulation.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Broadband Rydberg Atom-Based Electric-Field Probe: From Self-Calibrated Measurements to Sub-Wavelength Imaging
Authors:
Christopher L. Holloway,
Josh A. Gordon,
Steven Jefferts,
Andrew Schwarzkopf,
David A. Anderson,
Stephanie A. Miller,
Nithiwadee Thaicharoen,
Georg Raithel
Abstract:
We discuss a fundamentally new approach for the measurement of electric (E) fields that will lead to the development of a broadband, direct SI-traceable, compact, self-calibrating E-field probe (sensor). This approach is based on the interaction of radio frequency (RF) fields with alkali atoms excited to Rydberg states. The RF field causes an energy splitting of the Rydberg states via the Autler-T…
▽ More
We discuss a fundamentally new approach for the measurement of electric (E) fields that will lead to the development of a broadband, direct SI-traceable, compact, self-calibrating E-field probe (sensor). This approach is based on the interaction of radio frequency (RF) fields with alkali atoms excited to Rydberg states. The RF field causes an energy splitting of the Rydberg states via the Autler-Townes effect and we detect the splitting via electromagnetically induced transparency (EIT). In effect, alkali atoms placed in a vapor cell act like an RF-to-optical transducer, converting an RF E-field strength measurement to an optical frequency measurement. We demonstrate the broadband nature of this approach by showing that one small vapor cell can be used to measure E-field strengths over a wide range of frequencies: 1 GHz to 500 GHz. The technique is validated by comparing experimental data to both numerical simulations and far-field calculations for various frequencies. We also discuss various applications, including: a direct traceable measurement, the ability to measure both weak and strong field strengths, compact form factors of the probe, and sub-wavelength imaging and field map**.
△ Less
Submitted 27 May, 2014;
originally announced May 2014.