-
SFY -- A lightweight, high-frequency and phase-resolving wave-buoy for coastal waters
Authors:
Gaute Hope,
Torunn Irene Seldal,
Jean Rabault,
Helge Thomas Bryhni,
Patrik Bohlinger,
Jan-Victor Björkqvist,
Tor Nordam,
Atle Kleven,
Arsalan Mostaani,
Birgitte Rugaard Furevik,
Lars Robert Hole,
Roger Storvik,
Øyvind Breivik
Abstract:
Small lightweight wave buoys, SFYs, designed to operate near the coast, have been developed. The buoys are designed to record and transmit the full time series of surface acceleration at $52$ Hz. The buoy uses the cellular network to transfer data and position (up to $80$ km from the base station). This reduces costs and increases band-width. The low cost and low weight permits the buoys to be dep…
▽ More
Small lightweight wave buoys, SFYs, designed to operate near the coast, have been developed. The buoys are designed to record and transmit the full time series of surface acceleration at $52$ Hz. The buoy uses the cellular network to transfer data and position (up to $80$ km from the base station). This reduces costs and increases band-width. The low cost and low weight permits the buoys to be deployed easily, and in arrays in areas where satellite and wave models struggle to resolve wave and current interaction. The buoys are tested in a wave-flume, the open water and in the breaking waves of the surf. The conditions range from calm to significant wave heights exceeding $7$ m and crashing breakers with accelerations exceeding $10$ g. The high sample rate captures the impulse of breaking waves, and allows them to be studied in detail. Breaking waves are measured and quantified in the open water. We measure breaking waves in the surf and recover the trajectory of waves breaking in the field to a higher degree than previously done. The time series of surface elevation, and accurate positioning, permits the signal of adjacent buoys to be correlated in a coherent phase-resolved way. Finally, we offer an explanation and solution for the ubiquitous low-frequency noise in IMU-based buoys and discuss necessary sampling and design to measure in areas of breaking waves.
△ Less
Submitted 21 June, 2024; v1 submitted 4 January, 2024;
originally announced January 2024.
-
Wave Measurements using Open Source Ship Mounted Ultrasonic Altimeter and Motion Correction System during the One Ocean Expedition
Authors:
Judith Thu Ølberg,
Patrik Bohlinger,
Øyvind Breivik,
Kai H. Christensen,
Birgitte R. Furevik,
Lars R. Hole,
Gaute Hope,
Atle Jensen,
Fabian Knoblauch,
Ngoc-Thanh Nguyen,
Jean Rabault
Abstract:
This study reviews the design and signal processing of ship borne ultrasonic altimeter wave measurements. The system combines a downward facing ultrasonic altimeter to capture the sea surface elevation as a time series, and an inertial measurement unit to compensate for the ship's motion. The methodology is cost-effective, open source, and adaptable to various ships and platforms. The system was i…
▽ More
This study reviews the design and signal processing of ship borne ultrasonic altimeter wave measurements. The system combines a downward facing ultrasonic altimeter to capture the sea surface elevation as a time series, and an inertial measurement unit to compensate for the ship's motion. The methodology is cost-effective, open source, and adaptable to various ships and platforms. The system was installed on the barque Statsraad Lehmkuhl and recorded data continuously during the 20-month One Ocean Expedition. Results from 1-month crossing of the Tropical Atlantic are presented here. The one-dimensional wave spectrum and associated wave parameters are obtained from the sea surface elevation time series. The observed significant wave height agrees well with satellite altimetry and a spectral wave model. The agreement between observations and the spectral wave model is better for the mean wave period than the peak period. We perform Doppler shift corrections to improve wave period estimates by accounting for the speed of the ship relative to the waves. This correction enhances the accuracy of the mean period, but not the peak period. We suggest that the Doppler correction could be improved by complementing the data sources with directional wave measurements from a marine X-band radar.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
A dataset of direct observations of sea ice drift and waves in ice
Authors:
Jean Rabault,
Malte Müller,
Joey Voermans,
Dmitry Brazhnikov,
Ian Turnbull,
Aleksey Marchenko,
Martin Biuw,
Takehiko Nose,
Takuji Waseda,
Malin Johansson,
Øyvind Breivik,
Graig Sutherland,
Lars Robert Hole,
Mark Johnson,
Atle Jensen,
Olav Gundersen,
Yngve Kristoffersen,
Alexander Babanin,
Paulina Tedesco,
Kai Haakon Christensen,
Martin Kristiansen,
Gaute Hope,
Tsubasa Kodaira,
Victor de Aguiar,
Catherine Taelman
, et al. (3 additional authors not shown)
Abstract:
Variability in sea ice conditions, combined with strong couplings to the atmosphere and the ocean, lead to a broad range of complex sea ice dynamics. More in-situ measurements are needed to better identify the phenomena and mechanisms that govern sea ice growth, drift, and breakup. To this end, we have gathered a dataset of in-situ observations of sea ice drift and waves in ice. A total of 15 depl…
▽ More
Variability in sea ice conditions, combined with strong couplings to the atmosphere and the ocean, lead to a broad range of complex sea ice dynamics. More in-situ measurements are needed to better identify the phenomena and mechanisms that govern sea ice growth, drift, and breakup. To this end, we have gathered a dataset of in-situ observations of sea ice drift and waves in ice. A total of 15 deployments were performed over a period of 5 years in both the Arctic and Antarctic, involving 72 instruments. These provide both GPS drift tracks, and measurements of waves in ice. The data can, in turn, be used for tuning sea ice drift models, investigating waves dam** by sea ice, and hel** calibrate other sea ice measurement techniques, such as satellite based observations.
△ Less
Submitted 25 October, 2022;
originally announced November 2022.
-
OpenMetBuoy-V2021: an easy-to-build, affordable, customizable, open source instrument for oceanographic measurements of drift and waves in sea ice and the open ocean
Authors:
Jean Rabault,
Takehiko Nose,
Gaute Hope,
Malte Muller,
Oyvind Breivik,
Joey Voermans,
Lars Robert Hole,
Patrik Bohlinger,
Takuji Waseda,
Tsubasa Kodaira,
Tomotaka Katsuno,
Mark Johnson,
Graig Sutherland,
Malin Johanson,
Kai Haakon Christensen,
Adam Garbo,
Atle Jensen,
Olav Gundersen,
Aleksey Marchenko,
Alexander Babanin
Abstract:
There is a wide consensus within the polar science, meteorology, and oceanography communities that more in-situ observations of the ocean, atmosphere, and sea ice, are required to further improve operational forecasting model skills. Traditionally, the volume of such measurements has been limited by the high cost of commercially available instruments. An increasingly attractive solution to this co…
▽ More
There is a wide consensus within the polar science, meteorology, and oceanography communities that more in-situ observations of the ocean, atmosphere, and sea ice, are required to further improve operational forecasting model skills. Traditionally, the volume of such measurements has been limited by the high cost of commercially available instruments. An increasingly attractive solution to this cost issue is to use instruments produced in-house from open source hardware, firmware, and post processing building blocks. In the present work, we release the next iteration of the open source drifter and waves monitoring instruments. The new design is both significantly less expensive, much easier to build and assemble for people without specific microelectronics and programming competence, more easily extendable and customizable, and two orders of magnitude more power efficient. Improving performance and reducing noise levels and costs compared with our previous generation of instruments is possible in large part thanks to progress from the electronics component industry. As a result, we believe that this will allow scientists in geosciences to increase by an order of magnitude the amount of in-situ data they can collect under a constant instrumentation budget. In the following, we offer 1) detailed overview of our hardware and software solution, 2) in-situ validation and benchmarking of our instrument, 3) full open source release of both hardware and software blueprints. We hope that this work, and the associated open source release, may be a milestone that will allow our scientific fields to transition towards open source, community driven instrumentation. We believe that this could have a considerable impact on many fields, by making in-situ instrumentation at least an order of magnitude less expensive and more customizable than it has been for the last 50 years.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
