-
The influence of different coronal hole geometries on simulations of coronal wave -- coronal hole interaction
Authors:
I. Piantschitsch,
J. Terradas,
E. Soubrie,
S. G. Heinemann,
S. J. Hofmeister,
R. Soler,
M. Temmer
Abstract:
The geometry of a coronal hole (CH) affects the density profile of the reflected part of an incoming global coronal wave (CW). In this study, we perform for the first time magnetohydrodynamic (MHD) simulations of fast-mode MHD waves interacting with CHs of different geometries, such as circular, elliptic, convex, and concave shapes. We analyse the influence these geometries have on the density pro…
▽ More
The geometry of a coronal hole (CH) affects the density profile of the reflected part of an incoming global coronal wave (CW). In this study, we perform for the first time magnetohydrodynamic (MHD) simulations of fast-mode MHD waves interacting with CHs of different geometries, such as circular, elliptic, convex, and concave shapes. We analyse the influence these geometries have on the density profiles of the reflected waves and we generate the corresponding simulation-based time-distance plots. Within these time-distance plots we determine regions that exhibit specific density features, such as large reflected density amplitudes. In a further step, these interaction features can be compared to actual observed CW-CH interaction events which makes it possible to explain interaction parameters from the observed interaction events, such as the density structure of the reflected wave, which are usually difficult to comprehensively understand by only analysing the measurements. Moreover, we show that the interaction between a concave shaped CH and CWs, whose density profile include an enhanced as well as a depleted wave, can lead to reflected density amplitudes that are more than two times larger than the incoming ones. Another effect of the interplay between the constructive and destructive interference of the reflected wave parts is a strongly depleted region in the middle of the CW-CH interaction process. In addition, we show how important the choice of the path is that is used to generate the time-distance plots and how this choice affects the interpretation of the CW-CH interaction results.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
On the Origin of the sudden Heliospheric Open Magnetic Flux Enhancement during the 2014 Pole Reversal
Authors:
Stephan G. Heinemann,
Mathew J. Owens,
Manuela Temmer,
James A. Turtle,
Charles N. Arge,
Carl J. Henney,
Jens Pomoell,
Eleanna Asvestari,
Jon A. Linker,
Cooper Downs,
Ronald M. Caplan,
Stefan J. Hofmeister,
Camilla Scolini,
Rui F. Pinto,
Maria S. Madjarska
Abstract:
Coronal holes are recognized as the primary sources of heliospheric open magnetic flux (OMF). However, a noticeable gap exists between in-situ measured OMF and that derived from remote sensing observations of the Sun. In this study, we investigate the OMF evolution and its connection to solar structures throughout 2014, with special emphasis on the period from September to October, where a sudden…
▽ More
Coronal holes are recognized as the primary sources of heliospheric open magnetic flux (OMF). However, a noticeable gap exists between in-situ measured OMF and that derived from remote sensing observations of the Sun. In this study, we investigate the OMF evolution and its connection to solar structures throughout 2014, with special emphasis on the period from September to October, where a sudden and significant OMF increase was reported. By deriving the OMF evolution at 1au, modeling it at the source surface, and analyzing solar photospheric data, we provide a comprehensive analysis of the observed phenomenon. First, we establish a strong correlation between the OMF increase and the solar magnetic field derived from a Potential Field Source Surface (PFSS) model ($cc_{\mathrm{Pearson}}=0.94$). Moreover, we find a good correlation between the OMF and the open flux derived from solar coronal holes ($cc_{\mathrm{Pearson}}=0.88$), although the coronal holes only contain $14-32\%$ of the Sun's total open flux. However, we note that while the OMF evolution correlates with coronal hole open flux, there is no correlation with the coronal hole area evolution ($cc_{\mathrm{Pearson}}=0.0$). The temporal increase in OMF correlates with the vanishing remnant magnetic field at the southern pole, caused by poleward flux circulations from the decay of numerous active regions months earlier. Additionally, our analysis suggests a potential link between the OMF enhancement and the concurrent emergence of the largest active region in solar cycle 24. In conclusion, our study provides insights into the strong increase in OMF observed during September to October 2014.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
The Basic Iterative Deconvolution: A fast instrumental point-spread function deconvolution method that corrects for light that is scattered out of the field of view of a detector
Authors:
Stefan Johann Hofmeister
Abstract:
A point-spread function describes the optics of an imaging system and can be used to correct collected images for instrumental effects. The state of the art for deconvolving images with the point-spread function is the Richardson-Lucy algorithm; however, despite its high fidelity, it is slow and cannot account for light scattered out of the field of view of the detector. We reinstate the Basic Ite…
▽ More
A point-spread function describes the optics of an imaging system and can be used to correct collected images for instrumental effects. The state of the art for deconvolving images with the point-spread function is the Richardson-Lucy algorithm; however, despite its high fidelity, it is slow and cannot account for light scattered out of the field of view of the detector. We reinstate the Basic Iterative Deconvolution (BID) algorithm, a deconvolution algorithm that considers photons scattered out of the field of view of the detector, and extend it for image subregion deconvolutions. Its runtime is 1.8 to 7.1 faster than the Richardson-Lucy algorithm for 4096 x 4096 pixels images and up to an additional factor of 150 for subregions of 250 x 250 pixels. We test the extended BID algorithm for solar images taken by the Atmospheric Imaging Assembly (AIA), and find that the deviations between the reconstructed intensities of BID and the Richardson-Lucy algorithm are smaller than 1%.
△ Less
Submitted 5 May, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
Coronal Models and Detection of Open Magnetic Field
Authors:
Eleanna Asvestari,
Manuela Temmer,
Ronald M. Caplan,
Jon A. Linker,
Stephan G. Heinemann,
Rui F. Pinto,
Carl J. Henney,
Charles N. Arge,
Mathew J. Owens,
Maria S. Madjarska,
Jens Pomoell,
Stefan J. Hofmeister,
Camilla Scolini,
Evangelia Samara
Abstract:
A plethora of coronal models, from empirical to more complex magnetohydrodynamic (MHD) ones, are being used for reconstructing the coronal magnetic field topology and estimating the open magnetic flux. However, no individual solution fully agrees with coronal hole observations and in situ measurements of open flux at 1~AU, as there is a strong deficit between model and observations contributing to…
▽ More
A plethora of coronal models, from empirical to more complex magnetohydrodynamic (MHD) ones, are being used for reconstructing the coronal magnetic field topology and estimating the open magnetic flux. However, no individual solution fully agrees with coronal hole observations and in situ measurements of open flux at 1~AU, as there is a strong deficit between model and observations contributing to the known problem of the missing open flux. In this paper we investigate the possible origin of the discrepancy between modeled and observed magnetic field topology by assessing the effect on the simulation output by the choice of the input boundary conditions and the simulation set up, including the choice of numerical schemes and the parameter initialization. In the frame of this work, we considered four potential field source surface based models and one fully MHD model, different types of global magnetic field maps and model initiation parameters. After assessing the model outputs using a variety of metrics, we conclude that they are highly comparable regardless of the differences set at initiation. When comparing all models to coronal hole boundaries extracted by extreme ultraviolet (EUV) filtergrams we find that they do not compare well. This miss-match between observed and modeled regions of open field is a candidate contributing to the open flux problem.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
On the short term stability and tilting motion of a well-observed low-latitude solar coronal hole
Authors:
Stephan G. Heinemann,
Stefan J. Hofmeister,
James A. Turtle,
Jens Pomoell,
Eleanna Asvestari,
Alphonse C. Sterling,
Andrea Diercke,
Cooper Downs
Abstract:
The understanding of the solar magnetic coronal structure is tightly linked to the shape of open field regions, specifically coronal holes. A dynamically evolving coronal hole coincides with the local restructuring of open to closed magnetic field, which leads to changes in the interplanetary solar wind structure. By investigating the dynamic evolution of a fast-tilting coronal hole, we strive to…
▽ More
The understanding of the solar magnetic coronal structure is tightly linked to the shape of open field regions, specifically coronal holes. A dynamically evolving coronal hole coincides with the local restructuring of open to closed magnetic field, which leads to changes in the interplanetary solar wind structure. By investigating the dynamic evolution of a fast-tilting coronal hole, we strive to uncover clues about what processes may drive its morphological changes, which are clearly visible in EUV filtergrams. Using combined 193A and 195A EUV observations by AIA/SDO and EUVI/STEREO_A, in conjunction with line-of-sight magnetograms taken by HMI/SDO, we track and analyze a coronal hole over 12 days to derive changes in morphology, area and magnetic field. We complement this analysis by potential field source surface modeling to compute the open field structure of the coronal hole. We find that the coronal hole exhibits an apparent tilting motion over time that cannot solely be explained by solar differential rotation. It tilts at a mean rate of ~3.2°/day that accelerates up to ~5.4°/day. At the beginning of May, the area of the coronal hole decreases by more than a factor of three over four days (from ~13 * 10^9 km^2 to ~4 * 10^9 km^2), but its open flux remains constant (~2 * 10^20 Mx). Further, the observed evolution is not reproduced by modeling that assumes the coronal magnetic field to be potential. In this study, we present a solar coronal hole that tilts at a rate that has yet to be reported in literature. The rate exceeds the effect of the coronal hole being advected by either photospheric or coronal differential rotation. Based on the analysis we find it likely that this is due to morphological changes in the coronal hole boundary caused by ongoing interchange reconnection and the interaction with a newly emerging ephemeral region in its vicinity.
△ Less
Submitted 20 September, 2023;
originally announced September 2023.
-
A comparative study of two X2.2 and X9.3 solar flares observed with HARPS-N: Reconciling Sun-as-a-star spectroscopy and high-spatial resolution solar observations in the context of the solar-stellar connection
Authors:
A. G. M. Pietrow,
M. Cretignier,
M. K. Druett,
J. D. Alvarado-Gómez,
S. J. Hofmeister,
M. Verma,
R. Kamlah,
M. Baratella,
E. M. Amazo-Gomez,
I. Kontogiannis,
E. Dineva,
A. Warmuth,
C. Denker,
K. Poppenhaeger,
O. Andriienko,
X. Dumusque,
M. G. Löfdahl
Abstract:
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a step** stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-inte…
▽ More
Stellar flares cannot be spatially resolved, which complicates ascertaining the physical processes behind particular spectral signatures. Due to their proximity to Earth, solar flares can serve as a step** stone for understanding their stellar counterparts, especially when using a Sun-as-a-star instrument and in combination with spatially resolved observations. We aim to understand the disk-integrated spectral behaviors of a confined X2.2 solar flare and its eruptive X9.3 successor as measured by HARPS-N. The behavior of multiple photospheric and chromospheric spectral lines are investigated by means of activity indices and contrast profiles. A number of different photospheric lines were also investigated by means of equivalent widths, and radial velocity measures, which are then related to physical processes directly observed in high-resolution observations made with the Swedish 1-meter Solar Telescope and SDO Our findings suggest a relationship between the evolving shapes of contrast profile time and the flare locations, which assists in constraining flare locations in disk-integrated observations. In addition, an upward bias was found in flare statistics based on activity indices derived from the Ca II H & K lines. In this case, much smaller flares cause a similar increase in the activity index as that produced by larger flares. H$α$-based activity indices do not show this bias and are therefore less susceptible to activity jitter. Sodium line profiles show a strongly asymmetric response during flare activity, which is best captured with a newly defined asymmetrical sodium activity index. A strong flare response was detected in Mn I line profiles, which is unexpected and calls for further exploration. Intensity increases in H$α$, H$β$, and certain spectral windows of AIA before the flare onset suggest their potential use as short-term flare predictors.
△ Less
Submitted 1 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
The role of initial density profiles in simulations of coronal wave - coronal hole interaction
Authors:
I. Piantschitsch,
J. Terradas,
E. Soubrie,
S. G. Heinemann,
S. J. Hofmeister,
R. Soler,
M. Temmer
Abstract:
Interactions between global coronal waves (CWs) and coronal holes (CHs) reveal many interesting features of reflected waves and coronal hole boundaries (CHB) but have fairly been studied so far. Magnetohydrodynamic (MHD) simulations can help us to better understand what is happening during these interaction events, and therefore, to achieve a broader understanding of the parameters involved. In th…
▽ More
Interactions between global coronal waves (CWs) and coronal holes (CHs) reveal many interesting features of reflected waves and coronal hole boundaries (CHB) but have fairly been studied so far. Magnetohydrodynamic (MHD) simulations can help us to better understand what is happening during these interaction events, and therefore, to achieve a broader understanding of the parameters involved. In this study, we perform for the first time 2D MHD simulations of a CW-CH interaction including a realistic initial wave density profile that consists of an enhanced as well as a depleted wave part. We vary several initial parameters, such as the initial density amplitudes of the incoming wave, the CH density, and the CHB width, which are all based on actual measurements. We analyse the effects of different incident angles on the interaction features and we use the corresponding time-distance plots to detect specific features of the incoming and the reflected wave. We found that a particular combination of a small CH density, a realistic initial density profile and a sufficiently small incident angle leads to remarkable interaction features, such as a large density amplitude of the reflected wave with respect to the incoming one. The parameter studies in this paper provide a tool to compare time-distance plots based on observational measurements to those created from simulations and therefore enable us to derive interaction parameters from observed CW-CH interaction events that usually cannot be obtained directly. The simulation results in this study are augmented by analytical expressions for the reflection coefficient of the CW-CH interaction which allows us to verify the simulations results in an additional way. This work is the first of a series of studies aiming to finally reconstruct actual observed CW-CH interaction events by means of MHD-simulations.
△ Less
Submitted 17 August, 2023;
originally announced August 2023.
-
CME Propagation Through the Heliosphere: Status and Future of Observations and Model Development
Authors:
M. Temmer,
C. Scolini,
I. G. Richardson,
S. G. Heinemann,
E. Paouris,
A. Vourlidas,
M. M. Bisi,
writing teams,
:,
N. Al-Haddad,
T. Amerstorfer,
L. Barnard,
D. Buresova,
S. J. Hofmeister,
K. Iwai,
B. V. Jackson,
R. Jarolim,
L. K. Jian,
J. A. Linker,
N. Lugaz,
P. K. Manoharan,
M. L. Mays,
W. Mishra,
M. J. Owens,
E. Palmerio
, et al. (9 additional authors not shown)
Abstract:
The ISWAT clusters H1+H2 have a focus on interplanetary space and its characteristics, especially on the large-scale co-rotating and transient structures impacting Earth. SIRs, generated by the interaction between high-speed solar wind originating in large-scale open coronal magnetic fields and slower solar wind from closed magnetic fields, are regions of compressed plasma and magnetic field follo…
▽ More
The ISWAT clusters H1+H2 have a focus on interplanetary space and its characteristics, especially on the large-scale co-rotating and transient structures impacting Earth. SIRs, generated by the interaction between high-speed solar wind originating in large-scale open coronal magnetic fields and slower solar wind from closed magnetic fields, are regions of compressed plasma and magnetic field followed by high-speed streams that recur at the ca. 27 day solar rotation period. Short-term reconfigurations of the lower coronal magnetic field generate flare emissions and provide the energy to accelerate enormous amounts of magnetised plasma and particles in the form of CMEs into interplanetary space. The dynamic interplay between these phenomena changes the configuration of interplanetary space on various temporal and spatial scales which in turn influences the propagation of individual structures. While considerable efforts have been made to model the solar wind, we outline the limitations arising from the rather large uncertainties in parameters inferred from observations that make reliable predictions of the structures impacting Earth difficult. Moreover, the increased complexity of interplanetary space as solar activity rises in cycle 25 is likely to pose a challenge to these models. Combining observational and modeling expertise will extend our knowledge of the relationship between these different phenomena and the underlying physical processes, leading to improved models and scientific understanding and more-reliable space-weather forecasting. The current paper summarizes the efforts and progress achieved in recent years, identifies open questions, and gives an outlook for the next 5-10 years. It acts as basis for updating the existing COSPAR roadmap by Schrijver+ (2015), as well as providing a useful and practical guide for peer-users and the next generation of space weather scientists.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Geomagnetic storm forecasting from solar coronal holes
Authors:
Simona Nitti,
Tatiana Podladchikova,
Stefan J. Hofmeister,
Astrid M. Veronig,
Giuliana Verbanac,
Mario Bandić
Abstract:
Coronal holes (CHs) are the source of high-speed streams (HSSs) in the solar wind, whose interaction with the slow solar wind creates corotating interaction regions (CIRs) in the heliosphere. Whenever the CIRs hit the Earth, they can cause geomagnetic storms. We develop a method to predict the strength of CIR/HSS-driven geomagnetic storms directly from solar observations using the CH areas and ass…
▽ More
Coronal holes (CHs) are the source of high-speed streams (HSSs) in the solar wind, whose interaction with the slow solar wind creates corotating interaction regions (CIRs) in the heliosphere. Whenever the CIRs hit the Earth, they can cause geomagnetic storms. We develop a method to predict the strength of CIR/HSS-driven geomagnetic storms directly from solar observations using the CH areas and associated magnetic field polarity. First, we build a dataset comprising the properties of CHs on the Sun, the associated HSSs, CIRs, and orientation of the interplanetary magnetic field (IMF) at L1, and the strength of the associated geomagnetic storms by the geomagnetic indices Dst and Kp. Then, we predict the Dst and Kp indices using a Gaussian Process model, which accounts for the annual variation of the orientation of Earth's magnetic field axis. We demonstrate that the polarity of the IMF at L1 associated with CIRs is preserved in around 83% of cases when compared to the polarity of their CH sources. Testing our model over the period 2010-2020, we obtained a correlation coefficient between the predicted and observed Dst index of R = 0.63/0.73, and Kp index of R = 0.65/0.67, for HSSs having a polarity towards/away from the Sun. These findings demonstrate the possibility of predicting CIR/HSS-driven geomagnetic storms directly from solar observations and extending the forecasting lead time up to several days, which is relevant for enhancing space weather predictions.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Deriving instrumental point spread functions from partially occulted images
Authors:
Stefan Johann Hofmeister,
Michael Hahn,
Daniel Wolf Savin
Abstract:
The point-spread function (PSF) of an imaging system describes the response of the system to a point source. Accurately determining the PSF enables one to correct for the combined effects of focussing and scattering within the imaging system, and thereby enhance the spatial resolution and dynamic contrast of the resulting images. We present a semi-empirical semi-blind methodology to derive a PSF f…
▽ More
The point-spread function (PSF) of an imaging system describes the response of the system to a point source. Accurately determining the PSF enables one to correct for the combined effects of focussing and scattering within the imaging system, and thereby enhance the spatial resolution and dynamic contrast of the resulting images. We present a semi-empirical semi-blind methodology to derive a PSF from partially occulted images. We partition the two-dimensional PSF into multiple segments, set up a multi-linear system of equations, and directly fit the system of equations to determine the PSF weight in each segment. The algorithm is guaranteed to converge towards the correct instrumental PSF for a large class of occultations, does not require a predefined functional form of the PSF, and can be applied to a large variety of partially occulted images, such as within laboratory settings, regular calibrations within a production line or in the field, astronomical images of distant clusters of stars, or partial solar eclipse images. We show that the central weight of the PSF, which gives the percentage of photons that are not scattered by the instrument, is accurate to bettern than 1.2%. The mean absolute percentage error between the reconstructed and true PSF is usually between 0.5% and 5% for the entire PSF, between 0.5% and 5% for the PSF core, and between 0.5% and 3% for the PSF tail.
△ Less
Submitted 28 October, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Influence of coronal hole morphology on the solar wind speed at Earth
Authors:
Evangelia Samara,
Jasmina Magdalenic,
Luciano Rodriguez,
Stephan G. Heinemann,
Manolis K. Georgoulis,
Stefan J. Hofmeister,
Stefaan Poedts
Abstract:
It has long been known that the high-speed stream (HSS) peak velocity at Earth directly depends on the area of the coronal hole (CH) on the Sun. Different degrees of association between the two parameters have been shown by many authors. In this study, we revisit this association in greater detail for a sample of 45 nonpolar CHs during the minimum phase of solar cycle 24. The aim is to understand…
▽ More
It has long been known that the high-speed stream (HSS) peak velocity at Earth directly depends on the area of the coronal hole (CH) on the Sun. Different degrees of association between the two parameters have been shown by many authors. In this study, we revisit this association in greater detail for a sample of 45 nonpolar CHs during the minimum phase of solar cycle 24. The aim is to understand how CHs of different properties influence the HSS peak speeds observed at Earth and draw from this to improve solar wind modeling. The characteristics of the CHs of our sample were extracted based on the Collection of Analysis Tools for Coronal Holes (CATCH) which employs an intensity threshold technique applied to extreme-ultraviolet (EUV) filtergrams. We first examined all the correlations between the geometric characteristics of the CHs and the HSS peak speed and duration at Earth, for the entire sample. The CHs were then categorized in different groups based on morphological criteria, such as the aspect ratio, the orientation angle and the geometric complexity, a parameter which is often neglected when the formation of the fast solar wind at Earth is studied. Our results, confirmed also by the bootstrap** technique, show that all three aforementioned morphological criteria play a major role in determining the HSS peak speed at 1 AU. Therefore, they need to be taken into consideration for empirical models that aim to forecast the fast solar wind at Earth based on the observed CH solar sources.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
How the area of solar coronal holes affects the properties of high-speed solar wind streams near Earth -- An analytical model
Authors:
Stefan Johann Hofmeister,
Eleanna Asvestari,
**gnan Guo,
Verena Heidrich-Meisner,
Stephan G. Heinemann,
Jasmina Magdalenic,
Stefaan Poedts,
Evangelia Samara,
Manuela Temmer,
Susanne Vennerstrom,
Astrid Veronig,
Bojan Vršnak,
Robert Wimmer-Schweingruber
Abstract:
We derive a simple analytical model for the propagation of HSSs from the Sun to Earth and thereby show how the area of coronal holes and the size of their boundary regions affect the HSS velocity, temperature, and density near Earth. We presume that velocity, temperature, and density profiles form across the HSS cross section close to the Sun and that these spatial profiles translate into correspo…
▽ More
We derive a simple analytical model for the propagation of HSSs from the Sun to Earth and thereby show how the area of coronal holes and the size of their boundary regions affect the HSS velocity, temperature, and density near Earth. We presume that velocity, temperature, and density profiles form across the HSS cross section close to the Sun and that these spatial profiles translate into corresponding temporal profiles in a given radial direction due to the solar rotation. These temporal distributions drive the stream interface to the preceding slow solar wind plasma and disperse with distance from the Sun. The HSS properties at 1 AU are then given by all HSS plasma parcels launched from the Sun that did not run into the stream interface at Earth distance. We show that the velocity plateau region of HSSs as seen at 1 AU, if apparent, originates from the center region of the HSS close to the Sun, whereas the velocity tail at 1 AU originates from the trailing boundary region. The peak velocity of HSSs at Earth further depends on the longitudinal width of the HSS close to the Sun. The temperature and density of HSS plasma parcels at Earth depend on their radial expansion from the Sun to Earth. The radial expansion is determined by the velocity gradient across the HSS boundary region close to the Sun and gives the velocity-temperature and density-temperature relationships at Earth their specific shape. When considering a large number of HSSs, the presumed correlation between the HSS velocities and temperatures close to the Sun degrades only slightly up to 1 AU, but the correlation between the velocities and densities is strongly disrupted up to 1 AU due to the radial expansion. Finally, we show how the number of particles of the piled-up slow solar wind in the stream interaction region depends on the velocities and densities of the HSS and preceding slow solar wind plasma.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
How to Estimate the Far-Side Open Flux using STEREO Coronal Holes
Authors:
Stephan G. Heinemann,
Manuela Temmer,
Stefan J. Hofmeister,
Aleksandar Stojakovic,
Laurent Gizon,
Dan Yang
Abstract:
Global magnetic field models use as input synoptic data, which usually show "aging effects" as the longitudinal 360° information is not obtained simultaneously. Especially during times of increased solar activity, the evolution of the magnetic field may yield large uncertainties. A significant source of uncertainty is the Sun's magnetic field on the side of the Sun that is not visible to the obser…
▽ More
Global magnetic field models use as input synoptic data, which usually show "aging effects" as the longitudinal 360° information is not obtained simultaneously. Especially during times of increased solar activity, the evolution of the magnetic field may yield large uncertainties. A significant source of uncertainty is the Sun's magnetic field on the side of the Sun that is not visible to the observer. Various methods have been used to complete the picture: synoptic charts, flux-transport models, and far side helioseismology. In this study, we present a new method to estimate the far-side open flux within coronal holes using STEREO EUV observations. First, we correlate the structure of the photospheric magnetic field as observed with the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory (HMI/SDO) with features in the transition region. From the 304A intensity distribution, which we found to be specific to coronal holes, we derive an empirical estimate for the open flux. Then we use a large sample of 313 SDO coronal hole observations to verify this relation. Finally, we perform a cross-instrument calibration from SDO to STEREO data to enable the estimation of the open flux at solar longitudes not visible from Earth. We find that the properties of strong, unipolar magnetic elements in the photosphere, which determine the coronal hole's open flux, can be approximated by open fields in the transition region. We find that structures below a threshold of 78% (STEREO) or 94% (SDO) of the solar disk median intensity as seen in 304A filtergrams are reasonably well correlated with the mean magnetic flux density of coronal holes (cc = 0.59). Using the area covered by these structures (A_of) and the area of the coronal hole (A_ch), we model the open magnetic flux of a coronal hole as |Phi_ch| = 0.25 A_ch exp(0.032 A_of) with an estimated uncertainty of 40 to 60%.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Coronal Hole Detection and Open Magnetic Flux
Authors:
J. A. Linker,
S. G. Heinemann,
M. Temmer,
M. J. Owens,
R. M. Caplan,
C. N. Arge,
E. Asvestari,
V. Delouille,
C. Downs,
S. J. Hofmeister,
I. C. Jebaraj,
M. Madjarska,
R. Pinto,
J. Pomoell,
E. Samara,
C. Scolini,
B. Vrsnak
Abstract:
Many scientists use coronal hole (CH) detections to infer open magnetic flux. Detection techniques differ in the areas that they assign as open, and may obtain different values for the open magnetic flux. We characterize the uncertainties of these methods, by applying six different detection methods to deduce the area and open flux of a near-disk center CH observed on 9/19/2010, and applying a sin…
▽ More
Many scientists use coronal hole (CH) detections to infer open magnetic flux. Detection techniques differ in the areas that they assign as open, and may obtain different values for the open magnetic flux. We characterize the uncertainties of these methods, by applying six different detection methods to deduce the area and open flux of a near-disk center CH observed on 9/19/2010, and applying a single method to five different EUV filtergrams for this CH. Open flux was calculated using five different magnetic maps. The standard deviation (interpreted as the uncertainty) in the open flux estimate for this CH was about 26%. However, including the variability of different magnetic data sources, this uncertainty almost doubles to 45%. We use two of the methods to characterize the area and open flux for all CHs in this time period. We find that the open flux is greatly underestimated compared to values inferred from in-situ measurements (by 2.2-4 times). We also test our detection techniques on simulated emission images from a thermodynamic MHD model of the solar corona. We find that the methods overestimate the area and open flux in the simulated CH, but the average error in the flux is only about 7%. The full-Sun detections on the simulated corona underestimate the model open flux, but by factors well below what is needed to account for the missing flux in the observations. Under-detection of open flux in coronal holes likely contributes to the recognized deficit in solar open flux, but is unlikely to resolve it.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Statistical Approach on Differential EmissionMeasure of Coronal Holes using the CATCH Catalog
Authors:
Stephan G. Heinemann,
Jonas Saqri,
Astrid M. Veronig,
Stefan J. Hofmeister,
Manuela Temmer
Abstract:
Coronal holes are large-scale structures in the solar atmosphere that feature a reduced temperature and density in comparison to the surrounding quiet Sun and are usually associated with open magnetic fields. We perform a differential emission measure analysis on the 707 non-polar coronal holes collected in the Collection of Analysis Tools for Coronal Holes (CATCH) catalog to derive and statistica…
▽ More
Coronal holes are large-scale structures in the solar atmosphere that feature a reduced temperature and density in comparison to the surrounding quiet Sun and are usually associated with open magnetic fields. We perform a differential emission measure analysis on the 707 non-polar coronal holes collected in the Collection of Analysis Tools for Coronal Holes (CATCH) catalog to derive and statistically analyze their plasma properties (i.e. temperature, electron density, and emission measure). We use intensity filtergrams of the six coronal EUV filters from the \textit{Atmospheric Imaging Assembly} onboard of the \textit{Solar Dynamics Observatory}, which cover a temperature range from $ \approx 10^{5.5}$ to $10^{7.5}$\,K. Correcting the data for stray and scattered light, we find that all coronal holes have very similar plasma properties with an average temperature of $0.94 \pm 0.18$ MK, a mean electron density of $(2.4 \pm 0.7) \times 10^{8}$\,cm$^{-3}$, and a mean emission measure of $(2.8 \pm 1.6) \times 10^{26}$\,cm$^{-5}$. The temperature distribution within the coronal hole was found to be largely uniform, whereas the electron density shows a $40\,\%$ linear decrease from the boundary towards the inside of the coronal hole. At distances greater than \SI{20}{\arcsecond} ($\approx 15$\,Mm) from the nearest coronal hole boundary, the density also becomes statistically uniform. The coronal hole temperature may show a weak solar cycle dependency, but no statistically significant correlation of plasma properties to solar cycle variations could be determined throughout the observed time period between 2010 and 2019.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Deriving CME density from remote sensing data and comparison to in-situ measurements
Authors:
M. Temmer,
L. Holzknecht,
M. Dumbovic,
B. Vrsnak,
N. Sachdeva,
S. G. Heinemann,
K. Dissauer,
C. Scolini,
E. Asvestari,
A. M. Veronig,
S. J. Hofmeister
Abstract:
We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the…
▽ More
We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the assumption that the CME mass is roughly equally distributed within a specific volume, we expand the CME self-similarly and calculate the CME density for distances close to the Sun (15-30 Rs) and at 1AU. Specific trends are derived comparing calculated and in-situ measured proton densities at 1AU, though large uncertainties are revealed due to the unknown mass and geometry evolution: i) a moderate correlation for the magnetic structure having a mass that stays rather constant (~0.56-0.59), and ii) a weak correlation for the sheath density (~0.26) by assuming the sheath region is an extra mass - as expected for a mass pile-up process - that is in its amount comparable to the initial CME deprojected mass. High correlations are derived between in-situ measured sheath density and the solar wind density (~ -0.73) and solar wind speed (~0.56) as measured 24 hours ahead of the arrival of the disturbance. This gives additional confirmation that the sheath-plasma indeed stems from piled-up solar wind material. While the CME interplanetary propagation speed is not related to the sheath density, the size of the CME may play some role in how much material could be piled up.
△ Less
Submitted 13 November, 2020;
originally announced November 2020.
-
On the Dependency between the Peak Velocity of High-speed Solar Wind Streams near Earth and the Area of Their Solar Source Coronal Holes
Authors:
Stefan J. Hofmeister,
Astrid M. Veronig,
Stefaan Poedts,
Evangelia Samara,
Jasmina Magdalenic
Abstract:
The relationship between the peak velocities of high-speed solar wind streams near Earth and the areas of their solar source regions, i.e., coronal holes, has been known since the 1970s, but it is still physically not well understood. We perform 3D magnetohydrodynamic (MHD) simulations using the European Heliospheric Forecasting Information Asset (EUHFORIA) code to show that this empirical relatio…
▽ More
The relationship between the peak velocities of high-speed solar wind streams near Earth and the areas of their solar source regions, i.e., coronal holes, has been known since the 1970s, but it is still physically not well understood. We perform 3D magnetohydrodynamic (MHD) simulations using the European Heliospheric Forecasting Information Asset (EUHFORIA) code to show that this empirical relationship forms during the propagation phase of high-speed streams from the Sun to Earth. For this purpose, we neglect the acceleration phase of high-speed streams, and project the areas of coronal holes to a sphere at 0.1 au. We then vary only the areas and latitudes of the coronal holes. The velocity, temperature, and density in the cross section of the corresponding highspeed streams at 0.1 au are set to constant, homogeneous values. Finally, we propagate the associated high-speed streams through the inner heliosphere using the EUHFORIA code. The simulated high-speed stream peak velocities at Earth reveal a linear dependence on the area of their source coronal holes. The slopes of the relationship decrease with increasing latitudes of the coronal holes, and the peak velocities saturate at a value of about 730 km/s, similar to the observations. These findings imply that the empirical relationship between the coronal hole areas and high-speed stream peak velocities does not describe the acceleration phase of high-speed streams, but is a result of the high-speed stream propagation from the Sun to Earth.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Differential Emission Measure Plasma Diagnostics of a Long-Lived Coronal Hole
Authors:
Jonas Saqri,
Astrid M. Veronig,
Stephan G. Heinemann,
Stefan J. Hofmeister,
Manuela Temmer,
Karin Dissauer,
Yang Su
Abstract:
We use Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) data to reconstruct the plasma properties from differential emission measure (DEM) analysis for a previously studied long-lived, low-latitude coronal hole (CH) over its lifetime of ten solar rotations. We initially obtain a non-isothermal DEM distribution with a dominant component centered around 0.9 MK and a secondary smal…
▽ More
We use Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) data to reconstruct the plasma properties from differential emission measure (DEM) analysis for a previously studied long-lived, low-latitude coronal hole (CH) over its lifetime of ten solar rotations. We initially obtain a non-isothermal DEM distribution with a dominant component centered around 0.9 MK and a secondary smaller component at 1.5 - 2.0 MK. We find that deconvolving the data with the instrument point spread function (PSF) to account for long-range scattered light reduces the secondary hot component. Using the 2012 Venus transit and a 2013 lunar eclipse to test the efficiency of this deconvolution, significant amounts of residual stray light are found for the occulted areas. Accounting for this stray light in the error budget of the different AIA filters further reduces the secondary hot emission, yielding CH DEM distributions that are close to isothermal with the main contribution centered around 0.9 MK. Based on these DEMs, we analyze the evolution of the emission measure (EM), density, and averaged temperature during the CH's lifetime. We find that once the CH is clearly observed in EUV images, the bulk of the CH plasma reveals a quite constant state, i.e. temperature and density reveal no major changes, whereas the total CH area and the photospheric magnetic fine structure inside the CH show a distinct evolutionary pattern. These findings suggest that CH plasma properties are mostly "set" at the CH formation or/and that all CHs have similar plasma properties.
△ Less
Submitted 7 January, 2020;
originally announced January 2020.
-
Photospheric magnetic structure of coronal holes
Authors:
Stefan J. Hofmeister,
Dominik Utz,
Stephan G. Heinemann,
Astrid Veronig,
Manuela Temmer
Abstract:
In this study, we investigate in detail the photospheric magnetic structure of 98 coronal holes using line-of-sight magnetograms of SDO/HMI, and for a subset of 42 coronal holes using HINODE/SOT G-band filtergrams. We divided the magnetic field maps into magnetic elements and quiet coronal hole regions by applying a threshold at $\pm 25$ G. We find that the number of magnetic bright points in magn…
▽ More
In this study, we investigate in detail the photospheric magnetic structure of 98 coronal holes using line-of-sight magnetograms of SDO/HMI, and for a subset of 42 coronal holes using HINODE/SOT G-band filtergrams. We divided the magnetic field maps into magnetic elements and quiet coronal hole regions by applying a threshold at $\pm 25$ G. We find that the number of magnetic bright points in magnetic elements is well correlated with the area of the magnetic elements (cc=$0.83\pm 0.01$). Further, the magnetic flux of the individual magnetic elements inside coronal holes is related to their area by a power law with an exponent of $1.261\pm 0.004$ (cc=$0.984\pm 0.001$). Relating the magnetic elements to the overall structure of coronal holes, we find that on average ($69\pm 8$) % of the overall unbalanced magnetic flux of the coronal holes arises from long-lived magnetic elements with lifetimes > 40 hours. About ($22\pm 4$) % of the unbalanced magnetic flux arises from a very weak background magnetic field in the quiet coronal hole regions with a mean magnetic field density of about 0.2 to 1.2 G. This background magnetic field is correlated to the flux of the magnetic elements with lifetimes of > 40 h (cc=$0.88\pm 0.02$). The remaining flux arises from magnetic elements with lifetimes < 40 hours. By relating the properties of the magnetic elements to the overall properties of the coronal holes, we find that the unbalanced magnetic flux of the coronal holes is completely determined by the total area that the long-lived magnetic elements cover (cc=$0.994\pm 0.001$).
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
CME -- HSS interaction and characteristics tracked from Sun to Earth
Authors:
Stephan G. Heinemann,
Manuela Temmer,
Charles J. Farrugia,
Karin Dissauer,
Christina Kay,
Thomas Wiegelmann,
Mateja Dumbović,
Astrid M. Veronig,
Tatiana Podladchikova,
Stefan J. Hofmeister,
Noé Lugaz,
Fernando Carcaboso
Abstract:
In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interac…
▽ More
In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interaction with a HSS, which emanates from a coronal hole (CH) close to the launch site of the CME. The results indicate that the major interaction between the CME and the HSS starts at a height of 1.3 Rsun up to 3 Rsun. Over that distance range, the CME undergoes a strong north-eastward deflection of at least 30 degrees due to the open magnetic field configuration of the CH. We perform a comprehensive analysis for the CME-HSS event using multi-viewpoint data (from the Solar TErrestrial RElations Observatories, the Solar and Heliospheric Observatory and the Solar Dynamics Observatory), and combined modeling efforts (nonlinear force-free field modeling, Graduated Cylindrical Shell CME modeling, and the Forecasting a CMEs Altered Trajectory ForeCAT model). We aim at better understanding its early evolution and interaction process as well as its interplanetary propagation and related in situ signatures, and finally the resulting impact on the Earth's magnetosphere.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
A statistical study of long-term evolution of coronal hole properties as observed by SDO
Authors:
Stephan G. Heinemann,
Veronika Jerčić,
Manuela Temmer,
Stefan J. Hofmeister,
Mateja Dumbović,
Susanne Vennerstroem,
Giuliana Verbanac,
Astrid M. Veronig
Abstract:
The study of the evolution of coronal holes (CHs) is especially important in the context of high-speed solar wind streams (HSS) emanating from them. Stream interaction regions may deliver large amount of energy into the Earths system, cause geomagnetic storms, and shape interplanetary space. By statistically analysing 16 long-living CHs observed by the SDO, we focus on coronal, morphological and u…
▽ More
The study of the evolution of coronal holes (CHs) is especially important in the context of high-speed solar wind streams (HSS) emanating from them. Stream interaction regions may deliver large amount of energy into the Earths system, cause geomagnetic storms, and shape interplanetary space. By statistically analysing 16 long-living CHs observed by the SDO, we focus on coronal, morphological and underlying photospheric magnetic field characteristics as well as investigate the evolution of the associated HSSs. We use CATCH to extract and analyse CHs using observations taken by AIA and HMI. We derive changes in the CH properties and correlate them to the CH evolution. Further we analyse the properties of the HSS signatures near 1au from OMNI data by manually extracting the peak bulk velocity of the solar wind plasma. We find that the area evolution of CHs mostly shows a rough trend of growing to a maximum followed by a decay. No correlation of the area evolution to the evolution of the signed magnetic flux and signed magnetic flux density enclosed in the projected CH area was found. From this we conclude that the magnetic flux within the extracted CH boundaries is not the main cause for its area evolution. We derive CH area change rates (growth and decay) of 14.2 +/- 15.0 * 10^8 km^2/day showing a reasonable anti-correlation (cc =-0.48) to the solar activity, approximated by the sunspot number. The change rates of the signed mean magnetic flux density (27.3 +/- 32.2 mG/day) and the signed magnetic flux (30.3 +/- 31.5 * 10^18 Mx/day) were also found to be dependent on solar activity (cc =0.50 and cc =0.69 respectively) rather than on the individual CH evolutions. Further we find that the CH area-to-HSS peak velocity relation is valid for each CH over its evolution but revealing significant variations in the slopes of the regression lines.
△ Less
Submitted 21 April, 2020; v1 submitted 5 July, 2019;
originally announced July 2019.
-
Statistical Analysis and Catalog of Non-polar Coronal Holes Covering the SDO-era using CATCH
Authors:
Stephan G. Heinemann,
Manuela Temmer,
Niko Heinemann,
Karin Dissauer,
Evangelia Samara,
Veronika Jerčić,
Stefan J. Hofmeister,
Astrid M. Veronig
Abstract:
Coronal holes are usually defined as dark structures as seen in the extreme ultraviolet and X-ray spectrum which are generally associated with open magnetic field. Deriving reliably the coronal hole boundary is of high interest, as its area, underlying magnetic field, and other properties give important hints towards high speed solar wind acceleration processes and on compression regions arriving…
▽ More
Coronal holes are usually defined as dark structures as seen in the extreme ultraviolet and X-ray spectrum which are generally associated with open magnetic field. Deriving reliably the coronal hole boundary is of high interest, as its area, underlying magnetic field, and other properties give important hints towards high speed solar wind acceleration processes and on compression regions arriving at Earth. In this study we present a new threshold based extraction method that incorporates the intensity gradient along the coronal hole boundary, which is implemented as a user-friendly SSWIDL GUI. The Collection of Analysis Tools for Coronal Holes (CATCH) enables the user to download data, perform guided coronal hole extraction and analyze the underlying photospheric magnetic field. We use CATCH to analyze non-polar coronal holes during the SDO-era, based on 193 Å filtergrams taken by the Atmospheric Imaging Assembly (AIA) and magnetograms taken by the Heliospheric and Magnetic Imager (HMI), both on board the Solar Dynamics Observatory (SDO). Between 2010 and 2019 we investigate 707 coronal holes that are located close to the central meridian. We find coronal holes distributed across latitudes of about +/- 60 degree for which we derive sizes between 1.6 x 10 9 and 1.8 x 10 11 km^2 . The absolute value of the mean signed magnetic field strength tends towards an average of 2.9 +/- 1.9 G. As far as the abundance and size of coronal holes is concerned, we find no distinct trend towards the northern or southern hemisphere. We find that variations in local and global conditions may significantly change the threshold needed for reliable coronal hole extraction and thus, we can highlight the importance of individually assessing and extracting coronal holes.
△ Less
Submitted 4 October, 2019; v1 submitted 3 July, 2019;
originally announced July 2019.
-
3-Phase Evolution of a Coronal Hole, Part II: The Magnetic Field
Authors:
S. G. Heinemann,
S. J. Hofmeister,
A. M. Veronig,
M. Temmer
Abstract:
We investigate the magnetic characteristics of a persistent coronal hole (CH) extracted from EUV imagery using HMI filtergrams over the timerange February 2012-October 2012. The magnetic field, its distribution as well as the magnetic fine structure in form of flux tubes (FT) are analyzed in different evolutionary states of the CH. We find a strong linear correlation between the magnetic propertie…
▽ More
We investigate the magnetic characteristics of a persistent coronal hole (CH) extracted from EUV imagery using HMI filtergrams over the timerange February 2012-October 2012. The magnetic field, its distribution as well as the magnetic fine structure in form of flux tubes (FT) are analyzed in different evolutionary states of the CH. We find a strong linear correlation between the magnetic properties (e.g. signed/unsigned magnetic field strength) and area of the CH. As such, the evolutionary pattern in the magnetic field clearly follows the three-phase evolution (growing, maximum and decaying phase) as found from EUV data (Part I). This evolutionary process is most likely driven by strong FTs with a mean magnetic field strength exceeding 50 G. During the maximum phase they entail up to 72% of the total signed magnetic flux of the CH, but only cover up to 3.9% of the total CH area, whereas during the growing and decaying phase, strong FTs entail 54-60% of the signed magnetic flux and cover around 1-2% of the CHs total area. We conclude that small scale-structures of strong unipolar magnetic field are the fundamental building blocks of a CH and govern its evolution.
△ Less
Submitted 4 July, 2019; v1 submitted 26 June, 2018;
originally announced June 2018.
-
3-Phase Evolution of a Coronal Hole, Part I: 360° remote sensing and in-situ observations
Authors:
S. G. Heinemann,
M. Temmer,
S. J. Hofmeister,
A. M. Veronig,
S. Vennerstroem
Abstract:
We investigate the evolution of a well-observed, long-lived, low-latitude coronal hole (CH) over 10 solar rotations in the year 2012. By combining EUV imagery from STEREO-A/B and SDO we are able to track and study the entire evolution of the CH having a continuous 360$°$ coverage of the Sun. The remote sensing data are investigated together with in-situ solar wind plasma and magnetic field measure…
▽ More
We investigate the evolution of a well-observed, long-lived, low-latitude coronal hole (CH) over 10 solar rotations in the year 2012. By combining EUV imagery from STEREO-A/B and SDO we are able to track and study the entire evolution of the CH having a continuous 360$°$ coverage of the Sun. The remote sensing data are investigated together with in-situ solar wind plasma and magnetic field measurements from STEREO-A/B, ACE and WIND. From this we obtain how different evolutionary states of the CH as observed in the solar atmosphere (changes in EUV intensity and area) affect the properties of the associated high-speed stream measured at $1$AU. Most distinctly pronounced for the CH area, three development phases are derived: a) growing, b) maximum, and c) decaying phase. During these phases the CH area a) increases over a duration of around three months from about $1 \cdot 10^{10} \mathrm{km}^{2}$ to $6 \cdot 10^{10} \mathrm{km}^{2}$, b) keeps a rather constant area for about one month of $> 9 \cdot 10^{10} \mathrm{km}^{2}$, and c) finally decreases in the following three months below $1 \cdot 10^{10} \mathrm{km}^{2}$ until the CH cannot be identified anymore. The three phases manifest themselves also in the EUV intensity and in in-situ measured solar wind proton bulk velocity. Interestingly, the three phases are related to a different range in solar wind speed variations and we find for the growing phase a range of $460-600$~km~s$^{-1}$, for the maximum phase $600-720$~km~s$^{-1}$, and for the decaying phase a more irregular behavior connected to slow and fast solar wind speed of $350-550$~km~s$^{-1}$.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
The Dependence of the Peak Velocity of High-Speed Solar Wind Streams as Measured in the Ecliptic by ACE and the STEREO satellites on the Area and Co-Latitude of their Solar Source Coronal Holes
Authors:
Stefan J. Hofmeister,
Astrid Veronig,
Manuela Temmer,
Susanne Vennerstrom,
Bernd Heber,
Bojan Vršnak
Abstract:
We study the properties of 115 coronal holes in the time-range from 2010/08 to 2017/03, the peak velocities of the corresponding high-speed streams as measured in the ecliptic at 1 AU, and the corresponding changes of the Kp index as marker of their geo-effectiveness. We find that the peak velocities of high-speed streams depend strongly on both the ar- eas and the co-latitudes of their solar sour…
▽ More
We study the properties of 115 coronal holes in the time-range from 2010/08 to 2017/03, the peak velocities of the corresponding high-speed streams as measured in the ecliptic at 1 AU, and the corresponding changes of the Kp index as marker of their geo-effectiveness. We find that the peak velocities of high-speed streams depend strongly on both the ar- eas and the co-latitudes of their solar source coronal holes with regard to the heliospheric latitude of the satellites. Therefore, the co-latitude of their source coronal hole is an im- portant parameter for the prediction of the high-speed stream properties near the Earth. We derive the largest solar wind peak velocities normalized to the coronal hole areas for coronal holes located near the solar equator, and that they linearly decrease with increas- ing latitudes of the coronal holes. For coronal holes located at latitudes & 60°, they turn statistically to zero, indicating that the associated high-speed streams have a high chance to miss the Earth. Similar, the Kp index per coronal hole area is highest for the coronal holes located near the solar equator and strongly decreases with increasing latitudes of the coronal holes. We interpret these results as an effect of the three-dimensional propaga- tion of high-speed streams in the heliosphere, i.e., high-speed streams arising from coro- nal holes near the solar equator propagate in direction towards and directly hit the Earth, whereas solar wind streams arising from coronal holes at higher solar latitudes only graze or even miss the Earth.
△ Less
Submitted 26 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Characteristics of Low-Latitude Coronal Holes near the Maximum of Solar cycle 24
Authors:
S. J. Hofmeister,
A. Veronig,
M. A. Reiss,
M. Temmer,
S. Vennerstrom,
B. Vršnak,
B. Heber
Abstract:
We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes,…
▽ More
We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes, and the distribution of magnetic flux tubes in coronal holes. We find that the mean magnetic field density of all coronal holes under study is 3.0 +- 1.6 G, and the percentage of unbalanced magnetic flux is 49 +- 16 %. The mean magnetic field density, the mean unsigned magnetic field density, and the percentage of unbalanced magnetic flux of coronal holes depend strongly pairwise on each other, with correlation coefficients cc > 0.92. Furthermore, we find that the unbalanced magnetic flux of the coronal holes is predominantly concentrated in magnetic flux tubes: 38 % (81 %) of the unbalanced magnetic flux of coronal holes arises from only 1 % (10 %) of the coronal hole area, clustered in magnetic flux tubes with field strengths > 50 G (10 G). The average magnetic field density and the unbalanced magnetic flux derived from the magnetic flux tubes correlate with the mean magnetic field density and the unbalanced magnetic flux of the overall coronal hole (cc > 0.93). These findings give evidence that the overall magnetic characteristics of coronal holes are governed by the characteristics of the magnetic flux tubes.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Preconditioning of interplanetary space due to transient CME disturbances
Authors:
Manuela Temmer,
Martin A. Reiss,
Ljubomir Nikolic,
Stefan J. Hofmeister,
Astrid M. Veronig
Abstract:
Interplanetary space is characteristically structured mainly by high-speed solar wind streams emanating from coronal holes and transient disturbances such as coronal mass ejections (CMEs). While high-speed solar wind streams pose a continuous outflow, CMEs abruptly disrupt the rather steady structure causing large deviations from the quiet solar wind conditions. For the first time, we give a quant…
▽ More
Interplanetary space is characteristically structured mainly by high-speed solar wind streams emanating from coronal holes and transient disturbances such as coronal mass ejections (CMEs). While high-speed solar wind streams pose a continuous outflow, CMEs abruptly disrupt the rather steady structure causing large deviations from the quiet solar wind conditions. For the first time, we give a quantification of the duration of disturbed conditions (preconditioning) for interplanetary space caused by CMEs. To this aim, we investigate the plasma speed component of the solar wind and the impact of in situ detected CMEs (ICMEs), compared to different background solar wind models (ESWF, WSA, persistence model) for the time range 2011-2015. We quantify in terms of standard error measures the deviations between modeled background solar wind speed and observed solar wind speed. Using the mean absolute error, we obtain an average deviation for quiet solar activity within a range of 75.1-83.1 km/s. Compared to this baseline level, periods within the ICME interval showed an increase of 18-32% above the expected background and the period of 2 days after the ICME displayed an increase of 9-24%. We obtain a total duration of enhanced deviations over about 3 and up to 6 days after the ICME start, which is much longer than the average duration of an ICME disturbance itself (~1.3 days), concluding that interplanetary space needs ~2-5 days to recover from the impact of ICMEs. The obtained results have strong implications for studying CME propagation behavior and also for space weather forecasting.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
Verification of high-speed solar wind stream forecasts using operational solar wind models
Authors:
Martin A. Reiss,
Manuela Temmer,
Astrid M. Veronig,
Ljubomir Nikolic,
Susanne Vennerstrom,
Florian Schoengassner,
Stefan J. Hofmeister
Abstract:
High-speed solar wind streams emanating from coronal holes are frequently im**ing on the Earth's magnetosphere causing recurrent, medium-level geomagnetic storm activity. Modeling high-speed solar wind streams is thus an essential element of successful space weather forecasting. Here we evaluate high-speed stream forecasts made by the empirical solar wind forecast (ESWF) and the semiempirical Wa…
▽ More
High-speed solar wind streams emanating from coronal holes are frequently im**ing on the Earth's magnetosphere causing recurrent, medium-level geomagnetic storm activity. Modeling high-speed solar wind streams is thus an essential element of successful space weather forecasting. Here we evaluate high-speed stream forecasts made by the empirical solar wind forecast (ESWF) and the semiempirical Wang-Sheeley-Arge (WSA) model based on the in situ plasma measurements from the ACE spacecraft for the years 2011 to 2014. While the ESWF makes use of an empirical relation between the coronal hole area observed in Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) images and solar wind properties at the near-Earth environment, the WSA model establishes a link between properties of the open magnetic field lines extending from the photosphere to the corona and the background solar wind conditions. We found that both solar wind models are capable of predicting the large-scale features of the observed solar wind speed (root-mean-square error, RMSE $\approx$ 100 km/s) but tend to either overestimate (ESWF) or underestimate (WSA) the number of high-speed solar wind streams (threat score, TS $\approx$ 0.37). The predicted high-speed streams show typical uncertainties in the arrival time of about 1 day and uncertainties in the speed of about 100 km/s. General advantages and disadvantages of the investigated solar wind models are diagnosed and outlined.
△ Less
Submitted 24 July, 2016;
originally announced July 2016.
-
Improvements on coronal hole detection in SDO/AIA images using supervised classification
Authors:
Martin A. Reiss,
Stefan J. Hofmeister,
Ruben De Visscher,
Manuela Temmer,
Astrid M. Veronig,
Véronique Delouille,
Benjamin Mampaey,
Helmut Ahammer
Abstract:
We demonstrate the use of machine learning algorithms in combination with segmentation techniques in order to distinguish coronal holes and filaments in SDO/AIA EUV images of the Sun. Based on two coronal hole detection techniques (intensity-based thresholding, SPoCA), we prepared data sets of manually labeled coronal hole and filament channel regions present on the Sun during the time range 2011…
▽ More
We demonstrate the use of machine learning algorithms in combination with segmentation techniques in order to distinguish coronal holes and filaments in SDO/AIA EUV images of the Sun. Based on two coronal hole detection techniques (intensity-based thresholding, SPoCA), we prepared data sets of manually labeled coronal hole and filament channel regions present on the Sun during the time range 2011 - 2013. By map** the extracted regions from EUV observations onto HMI line-of-sight magnetograms we also include their magnetic characteristics. We computed shape measures from the segmented binary maps as well as first order and second order texture statistics from the segmented regions in the EUV images and magnetograms. These attributes were used for data mining investigations to identify the most performant rule to differentiate between coronal holes and filament channels. We applied several classifiers, namely Support Vector Machine, Linear Support Vector Machine, Decision Tree, and Random Forest and found that all classification rules achieve good results in general, with linear SVM providing the best performances (with a true skill statistic of ~0.90). Additional information from magnetic field data systematically improves the performance across all four classifiers for the SPoCA detection. Since the calculation is inexpensive in computing time, this approach is well suited for applications on real-time data. This study demonstrates how a machine learning approach may help improve upon an unsupervised feature extraction method.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Identification of coronal holes and filament channels in SDO/AIA 193Å images via geometrical classification methods
Authors:
M. Reiss,
M. Temmer,
T. Rotter,
S. J. Hofmeister,
A. M. Veronig
Abstract:
In this study, we describe and evaluate shape measures for distinguishing between coronal holes and filament channels as observed in Extreme Ultraviolet (EUV) images of the Sun. For a set of well-observed coronal hole and filament channel regions extracted from SDO/AIA 193Å images we analyze their intrinsic morphology during the period 2011 to 2013, by using well known shape measures from the lite…
▽ More
In this study, we describe and evaluate shape measures for distinguishing between coronal holes and filament channels as observed in Extreme Ultraviolet (EUV) images of the Sun. For a set of well-observed coronal hole and filament channel regions extracted from SDO/AIA 193Å images we analyze their intrinsic morphology during the period 2011 to 2013, by using well known shape measures from the literature and newly developed geometrical classification methods. The results suggest an asymmetry in the morphology of filament channels giving support for the sheared arcade or weakly twisted flux rope model for filaments. We find that the proposed shape descriptors have the potential to reduce coronal hole classification errors and are eligible for screening techniques in order to improve the forecasting of solar wind high-speed streams from coronal hole observations in solar EUV images.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.