Showing 1–29 of 29 results for author: Hoffstaetter, G H

Accelerators for Electroweak Physics and Higgs Boson Studies

Authors: A. Faus-Golfe, G. H. Hoffstaetter, Q. Qin, F. Zimmermann, T. Barklow, E. Barzi, S. Belomestnykh, M. Biagini, M. Chamizo Llatas, J. Gao, E. Gianfelice, B. List, V. Litvinenko, E. Nanni, T. Raubenheimer, T. Roser, T. Satogata, V. Shiltsev, S. Stapnes, V. Telnov

Abstract: We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, v… ▽ More We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, various linear colliders, colliders based on energy recovery linacs (ERLs), ERL-ring combinations, as well as gamma-gamma colliders. The linear colliders proposed consist of options for the International Linear Collider (ILC), for the Compact Linear Collider (CLIC), for the Cold Copper Collider (C^3), and for the more recent Higgs-Energy Lepton Collider (HELEN). ERLs are key components of the Recycling Linear e+e- Collider (ReLiC), of the Energy Recovery Linear Collider (ERLC), and of the Circular Energy Recovery Collider (CERC). Among the more conventional ring colliders, the following proposals are featured: the Future Circular Collider (FCC-ee), the Circular Electron Positron Collider (CEPC), the Electron Positron Circular Collider at Fermilab (EPCCF), and the Large Electron Positron collider $\#$3 (LEP-3). In addition, we consider the X-ray FEL based gamma-gamma Collider Higgs Factory (XCC) and the High-Energy High-Luminosity gamma-gamma collider (HE&HL gamma-gamma). Finally, a Higgs factory based on a circular muon collider is mentioned for completeness. △ Less

Submitted 20 November, 2022; v1 submitted 13 September, 2022; originally announced September 2022.

Comments: Submitted to Snowmass 2021

The storage ring proton EDM experiment

Authors: Jim Alexander, Vassilis Anastassopoulos, Rick Baartman, Stefan Baeßler, Franco Bedeschi, Martin Berz, Michael Blaskiewicz, Themis Bowcock, Kevin Brown, Dmitry Budker, Sergey Burdin, Brendan C. Casey, Gianluigi Casse, Giovanni Cantatore, Timothy Chupp, Hooman Davoudiasl, Dmitri Denisov, Milind V. Diwan, George Fanourakis, Antonios Gardikiotis, Claudio Gatti, James Gooding, Renee Fatemi, Wolfram Fischer, Peter Graham , et al. (52 additional authors not shown)

Abstract: We describe a proposal to search for an intrinsic electric dipole moment (EDM) of the proton with a sensitivity of \targetsens, based on the vertical rotation of the polarization of a stored proton beam. The New Physics reach is of order $10^~3$TeV mass scale. Observation of the proton EDM provides the best probe of CP-violation in the Higgs sector, at a level of sensitivity that may be inaccessib… ▽ More We describe a proposal to search for an intrinsic electric dipole moment (EDM) of the proton with a sensitivity of \targetsens, based on the vertical rotation of the polarization of a stored proton beam. The New Physics reach is of order $10^~3$TeV mass scale. Observation of the proton EDM provides the best probe of CP-violation in the Higgs sector, at a level of sensitivity that may be inaccessible to electron-EDM experiments. The improvement in the sensitivity to $θ_{QCD}$, a parameter crucial in axion and axion dark matter physics, is about three orders of magnitude. △ Less

Submitted 25 April, 2022; originally announced May 2022.

Beam Test Facilities for R&D in Accelerator Science and Technologies

Authors: John Power, Christine Clarke, Michael Downer, Eric Esarey, Cameron Geddes, Mark J. Hogan, Georg Heinz Hoffstaetter, Chunguang **g, Sergei Nagaitsev, Mark Palmer, Philippe Piot, Carl Schroeder, Donald Umstadter, Navid Vafaei-Najafabadi, Alexander Valishev, Louise Willingale, Vitaly Yakimenko

Abstract: This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6. This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Electric dipole moments and the search for new physics

Authors: Ricardo Alarcon, Jim Alexander, Vassilis Anastassopoulos, Takatoshi Aoki, Rick Baartman, Stefan Baeßler, Larry Bartoszek, Douglas H. Beck, Franco Bedeschi, Robert Berger, Martin Berz, Hendrick L. Bethlem, Tanmoy Bhattacharya, Michael Blaskiewicz, Thomas Blum, Themis Bowcock, Anastasia Borschevsky, Kevin Brown, Dmitry Budker, Sergey Burdin, Brendan C. Casey, Gianluigi Casse, Giovanni Cantatore, Lan Cheng, Timothy Chupp , et al. (118 additional authors not shown)

Abstract: Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near fu… ▽ More Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near future for a compelling suite of such experiments, along with developments needed in the encompassing theoretical framework. △ Less

Submitted 4 April, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021; updated with community edits and endorsements

Ion Coulomb Crystals in Storage Rings for Quantum Information Science

Authors: S. Brooks, K. Brown, F. Méot, A. Nomerotski, S. Peggs, M. Palmer, T. Roser, T. Shaftan, G. H. Hoffstaetter, S. Nagaitsev, J. Lykken, J. Jarvis, V. Lebedev, G. Stancari, A. Valishev, A. Taylor, A. Hurd, N. Moody, P. Muggli, A. Aslam, S. G. Biedron, T. Bolin, S. Sosa Guitron, C. Gonzalez-Zacarias, M. Larsson , et al. (7 additional authors not shown)

Abstract: Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit ope… ▽ More Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit operations to be able to implement error correction and fault-tolerant operations. Trapped ion qubits offer long coherence times that allow error correction. However, error correction algorithms require large numbers of qubits to work properly. We can potentially create many thousands (or more) of qubits with long coherence states in a storage ring. For example, a circular radio-frequency quadrupole, which acts as a large circular ion trap and could enable larger scale quantum computing. Such a Storage Ring Quantum Computer (SRQC) would be a scalable and fault tolerant quantum information system, composed of qubits with very long coherence lifetimes. With computing demands potentially outpacing the supply of high-performance systems, quantum computing could bring innovation and scientific advances to particle physics and other DOE supported programs. Increased support of R$\&$D in large scale ion trap quantum computers would allow the timely exploration of this exciting new scalable quantum computer. The R$\&$D program could start immediately at existing facilities and would include the design and construction of a prototype SRQC. We invite feedback from and collaboration with the particle physics and quantum information science communities. △ Less

Submitted 15 March, 2022; v1 submitted 13 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Different forms of first order spin-orbit motion and their utility in spin matching in electron storage rings

Authors: M. G. Signorelli, G. H. Hoffstaetter

Abstract: We derive the first order phase space dependence of spin-orbit motion of a particle in an accelerator by expanding the Thomas-BMT equation. Different forms can be found in the literature and we show how these are related, and care is taken to include fringe fields. The advantages of using certain forms is demonstrated by a detailed re-derivation of the spin matching conditions by V. Ptitsyn for th… ▽ More We derive the first order phase space dependence of spin-orbit motion of a particle in an accelerator by expanding the Thomas-BMT equation. Different forms can be found in the literature and we show how these are related, and care is taken to include fringe fields. The advantages of using certain forms is demonstrated by a detailed re-derivation of the spin matching conditions by V. Ptitsyn for the spin rotators in the Electron Storage Ring (ESR) of the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. △ Less

Submitted 16 February, 2024; v1 submitted 14 December, 2021; originally announced December 2021.

Ultimate bunch length and emittance performance of an MeV ultrafast electron diffraction apparatus with a DC gun and a multi-cavity SRF linac

Authors: Adam Bartnik, Colwyn Gulliford, Georg H. Hoffstaetter, Jared Maxson

Abstract: We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is based on the existing Cornell photoinjector, which can readily be applied to the presented findings. Using particle tracking simulations in conjunction with mult… ▽ More We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is based on the existing Cornell photoinjector, which can readily be applied to the presented findings. Using particle tracking simulations in conjunction with multiobjective genetic algorithm optimization, we explore the smallest bunch lengths, emittance, and probe spot sizes achievable. We present results for both stroboscopic conditions (with single electrons per pulse) and with $10^5$ electrons/bunch which may be suitable for single-shot diffraction images. In the stroboscopic case, the flexibility provided by the many-cavity bunching and acceleration allows for longitudinal phase space linearization without a higher harmonic field, providing sub-fs bunch lengths at the sample. Given low emittance photoemission conditions, these small bunch lengths can be maintained with probe transverse sizes at the single micron scale and below. In the case of $10^5$ electrons per pulse, we simulate state-of the art 5D brightness conditions: rms bunch lengths of 10 fs with 3 nm normalized emittances, while now permitting repetition rates as high as 1.3 GHz. Finally, to aid in the design of new SRF-based UED machines, we simulate the trade-off between the number of cavities used and achievable bunch length and emittance. △ Less

Submitted 28 February, 2022; v1 submitted 13 August, 2021; originally announced August 2021.

Measurement of the Per Cavity Energy Recovery Efficiency in the Single Turn CBETA Configuration

Authors: C. Gulliford, N. Banerjee, A. Bartnik, J. Crittenden, K. Deitrick, G. H. Hoffstaetter, P. Quigley, K. Smolenski, J. S. Berg, R. Michnoff, S. Peggs, D. Trbojevic

Abstract: Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficienc… ▽ More Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficiency of 99.4%, with per cavity power balances ranging from 99.2-99.8%, was measured. When accounting for small particle losses occurring in the path length adjustment sections of the return loop, this corresponds to per cavity single particle energy recovery efficiencies ranging from 99.8 to 100.5%. A maximum current of 70 microamps was energy recovered, limited by radiation shielding of the beam stop in its preliminary installation. △ Less

Submitted 28 October, 2020; originally announced October 2020.

The Large Hadron-Electron Collider at the HL-LHC

Authors: P. Agostini, H. Aksakal, S. Alekhin, P. P. Allport, N. Andari, K. D. J. Andre, D. Angal-Kalinin, S. Antusch, L. Aperio Bella, L. Apolinario, R. Apsimon, A. Apyan, G. Arduini, V. Ari, A. Armbruster, N. Armesto, B. Auchmann, K. Aulenbacher, G. Azuelos, S. Backovic, I. Bailey, S. Bailey, F. Balli, S. Behera, O. Behnke , et al. (312 additional authors not shown)

Abstract: The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent el… ▽ More The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies. △ Less

Submitted 12 April, 2021; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 373 pages, many figures, to be published by J. Phys. G

Report number: CERN-ACC-Note-2020-0002

Journal ref: J.Phys.G 48 (2021) 11, 110501

Energy and RF Cavity Phase Symmetry Enforcement in Multi-turn ERL Models

Authors: Rosalyn Koscica, Nilanjan Banerjee, Georg Heinz Hoffstaetter, William Lou, Gayathrini Premawardhana

Abstract: In a multipass energy recovery linac (ERL), each cavity must regain all energy expended from beam acceleration during beam deceleration, and the beam should achieve specific energy targets during each loop that returns it to the linac. For full energy recovery, and for every returning beam to meet loop energy requirements, we must specify and maintain the phase and voltage of cavity fields in addi… ▽ More In a multipass energy recovery linac (ERL), each cavity must regain all energy expended from beam acceleration during beam deceleration, and the beam should achieve specific energy targets during each loop that returns it to the linac. For full energy recovery, and for every returning beam to meet loop energy requirements, we must specify and maintain the phase and voltage of cavity fields in addition to selecting adequate flight times. These parameters are found with a full scale numerical optimization program. If we impose symmetry in time and energy during acceleration and deceleration, fewer parameters are needed, simplifying the optimization. As an example, we present symmetric models of the Cornell BNL ERL Test Accelerator (CBETA) with solutions that satisfy the optimization targets of loop energy and zero cavity loading. An identical cavity design and nearly uniform linac layout make CBETA a potential candidate for symmetric operation. △ Less

Submitted 5 September, 2019; v1 submitted 8 April, 2019; originally announced April 2019.

Journal ref: Phys. Rev. Accel. Beams 22, 091602 (2019)

Beam Commissioning Results from the CBETA Fractional Arc Test

Authors: C. Gulliford, N. Banerjee, A. Bartnik, J. S. Berg, J. Crittenden, J. Dobbins, R. Hulsart, J. Jones, D. J. Kelliher, B. Kuske, W. Lou, M. McAteer, R. Michnoff, S. Peggs, P. Quigley, D. Sagan, K. Smolenski, V. Vesherevich, D. Widger, G. H. Hoffstaetter, D. Trbojevic

Abstract: This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) r… ▽ More This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) return loop featuring first production Halbach style permanent magnets. Achieving these tasks required characterization of the injection beam, calibration and phasing of the main linac cavities, demonstration of the required 36 MeV energy gain, and measurement of the splitter line horizontal dispersion and R56 at the nominal 42 MeV. In addition, a procedure for determining the BPM offsets, as well as the tune per cell in the FFA section via scanning the linac energy and inducing betatron oscillations around the periodic orbit in the fractional arc was developed and tested. A detailed comparison of these measurements to simulation is discussed. △ Less

Submitted 11 February, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

Beam break-up current limit in multi-turn ERLs and CBETA

Authors: William Lou, Georg Heinz Hoffstaetter

Abstract: This paper uses theory and simulation of the Beam Break-Up instability (BBU) for multi-turn ERLs to determine and to optimize the current limit of the Cornell Brookhaven Energy-Recovery-Linac Test Accelerator (CBETA). Currently under construction at Cornell University's Wilson Laboratory, the primary structures of CBETA for beam recirculation include the Main Linac Cryomodule and the Fixed Field A… ▽ More This paper uses theory and simulation of the Beam Break-Up instability (BBU) for multi-turn ERLs to determine and to optimize the current limit of the Cornell Brookhaven Energy-Recovery-Linac Test Accelerator (CBETA). Currently under construction at Cornell University's Wilson Laboratory, the primary structures of CBETA for beam recirculation include the Main Linac Cryomodule and the Fixed Field Alternating Gradient beamline. As the electron bunches pass through the MLC cavities, Higher Order Modes (HOMs) are excited. The recirculating bunches return to the cavities to further excite HOMs, and this feedback loop can give rise to BBU. We will first explain how BBU effect is simulated using the tracking software BMAD, and check the agreement with the BBU theory for the most instructive cases. We then present simulation results on how BBU limits the maximum achievable current of CBETA with different HOM spectra in the cavities. Lastly we investigate ways to improve the threshold current of CBETA. △ Less

Submitted 21 December, 2018; originally announced December 2018.

Comments: 13 pages, 21 figures

CBETA Design Report, Cornell-BNL ERL Test Accelerator

Authors: G. H. Hoffstaetter, D. Trbojevic, C. Mayes, N. Banerjee, J. Barley, I. Bazarov, A. Bartnik, J. S. Berg, S. Brooks, D. Burke, J. Crittenden, L. Cultrera, J. Dobbins, D. Douglas, B. Dunham, R. Eichhorn, S. Full, F. Furuta, C. Franck, R. Gallagher, M. Ge, C. Gulliford, B. Heltsley, D. Jusic, R. Kaplan , et al. (29 additional authors not shown)

Abstract: This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec… ▽ More This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science. △ Less

Submitted 13 June, 2017; originally announced June 2017.

Thermocurrents and their Role in high Q Cavity Performance

Authors: R. Eichhorn, C. Daly, F. Furuta, A. Ganshyn, D. Gonnella, D. Hall, V. Ho, G. H. Hoffstaetter, M. Liepe, J. May-Mann, T. O'Connell, S. Posen, P. Quigley, J. Sears, V. Veshcherevich

Abstract: Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there w… ▽ More Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there where speculations and some models about the role of thermo-currents and flux-pinning, the difference in behaviour remained a mystery. In this paper we will for the first time present a consistent theoretical model which we confirmed by data that describes the role of thermo-currents, driven by temperature gradients and material transitions. We will clearly show how they impact the quality factor of a cavity, discuss our findings, relate it to findings at other labs and develop mitigation strategies which especially addresses the issue of achieving high quality factors of so-called nitrogen doped cavities in horizontal test. △ Less

Submitted 12 January, 2015; v1 submitted 19 November, 2014; originally announced November 2014.

Journal ref: Phys. Rev. ST Accel. Beams 19, 012001 (2016)

Compensation of wake-field-driven energy spread in Energy Recovery Linacs

Authors: Georg H. Hoffstaetter, Yang Hao Lau

Abstract: Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dum** them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created at high energy is amplified by the ratio between high energy and dump energy. Therefore, Energy Recovery Linacs are sensitive to energy spread acquired at hig… ▽ More Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dum** them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created at high energy is amplified by the ratio between high energy and dump energy. Therefore, Energy Recovery Linacs are sensitive to energy spread acquired at high energy, e.g. from wake fields. One can compensate the time-correlated energy spread due to wakes via energy-dependent time-of-flight terms in appropriate sections of an Energy Recovery Linac, and via high-frequency cavities. We show that nonlinear time-of-flight terms can only eliminate odd orders in the correlation between time and energy, if these terms are created by a beam transport within the linac that is common for accelerating and decelerating beams. If these two beams are separated, so that different beam transport sections can be used to produce time-of-flight terms suitable for each, also even-order terms in the energy spread can be eliminated. As an example, we investigate the potential of using this method for the Cornell x-ray Energy Recovery Linac. Via quadratic time-of-flight terms, the energy spread can be reduced by 66%. Alternatively, since the energy spread from the dominantly resistive wake fields of the analysed accelerator is approximately harmonic in time, a high-frequency cavity could diminish the energy spread by 81%. This approach would require bunch-lengthening and recompression in separate sections for accelerating and decelerating beams. Such sections have therefore been included in Cornell's x-ray Energy Recovery Linac design. △ Less

Submitted 16 May, 2008; originally announced May 2008.

Journal ref: Phys.Rev.STAccel.Beams11:070701,2008

Equilibrium ion distribution in the presence of clearing electrodes and its influence on electron dynamics

Authors: Georg H. Hoffstaetter, Christian Spethmann

Abstract: Here we compute the ion distribution produced by an electron beam when ion-clearing electrodes are installed. This ion density is established as an equilibrium between gas ionization and ion clearing. The transverse ion distributions are shown to strongly peak in the beam's center, producing very nonlinear forces on the electron beam. We will analyze perturbations to the beam properties by these… ▽ More Here we compute the ion distribution produced by an electron beam when ion-clearing electrodes are installed. This ion density is established as an equilibrium between gas ionization and ion clearing. The transverse ion distributions are shown to strongly peak in the beam's center, producing very nonlinear forces on the electron beam. We will analyze perturbations to the beam properties by these nonlinear fields. To obtain reasonable simulation speeds, we develop fast algorithms that take advantage of adiabatic invariants and scaling properties of Maxwell's equations and the Lorentz force. Our results are very relevant for high current Energy Recovery Linacs, where ions are produced relatively quickly, and where clearing gaps in the electron beam cannot easily be used for ion elimination. The examples in this paper therefore use parameters of the Cornell Energy Recovery Linac project. For simplicity we only consider the case of a circular electron beam of changing diameter. However, we parameterize this model to approximate non-round beams well. We find suitable places for clearing electrodes and compute the equilibrium ion density and its effect on electron-emittance growth and halo development. We find that it is not sufficient to place clearing electrodes only at the minimum of the electron beam potential where ions are accumulated. △ Less

Submitted 19 June, 2007; originally announced June 2007.

Journal ref: Phys.Rev.STAccel.Beams11:014001,2008

Transverse emittance dilution due to coupler kicks in linear accelerators

Authors: Brandon Buckley, Georg H. Hoffstaetter

Abstract: One of the main concerns in the design of low emittance linear accelerators (linacs) is the preservation of beam emittance. Here we discuss one possible source of emittance dilution, the coupler kick, due to transverse electromagnetic fields in the accelerating cavities of the linac caused by the power coupler geometry. In addition to emittance growth, the coupler kick also produces orbit distor… ▽ More One of the main concerns in the design of low emittance linear accelerators (linacs) is the preservation of beam emittance. Here we discuss one possible source of emittance dilution, the coupler kick, due to transverse electromagnetic fields in the accelerating cavities of the linac caused by the power coupler geometry. In addition to emittance growth, the coupler kick also produces orbit distortions. It is common wisdom that emittance growth from coupler kicks can be strongly reduced by using two couplers per cavity mounted opposite each other or by having the couplers of successive cavities alternation from above to below the beam pipe so as to cancel each individual kick. We therefore analyze consequences of alternate coupler placements. We show here that for sufficiently large Q values, alternating the coupler location from before to after the cavity leads to a cancellation of the orbit distortion but not of the emittance growth, whereas alternating the coupler location from before and above to behind and below the cavity cancels the emittance growth but not the orbit distortion. These compensations hold even when each cavity is individually detuned, e.g. by microphonics. Another effective method for reducing coupler kicks that is studied is the optimization of the phase of the coupler kick. This technique is independent of the coupler geometry but relies on operating on crest. A final technique studied is symmetrization of the cavity geometry in the coupler region with the addition of a stub opposite the coupler, which reduces the amplitude of the off axis fields and is thus effective for off crest acceleration as well. We show applications of these techniques to the energy recovery linac (ERL) planned at Cornell University. △ Less

Submitted 5 September, 2007; v1 submitted 18 June, 2007; originally announced June 2007.

Journal ref: Phys.Rev.STAccel.Beams10:111002,2007

Recirculating BBU thresholds for polarized HOMs with optical coupling

Authors: Georg H. Hoffstaetter, Ivan V. Bazarov, Changsheng Song

Abstract: We will derive the general theory of the beam-breakup instability in recirculating linear accelerators with coupled beam optics and with polarized higher order dipole modes. The bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where beam currents become very large and coupled optics are used on p… ▽ More We will derive the general theory of the beam-breakup instability in recirculating linear accelerators with coupled beam optics and with polarized higher order dipole modes. The bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where beam currents become very large and coupled optics are used on purpose to increase the threshold current. A remarkable agreement with tracking data is demonstrated. The general formulas are then analyzed for several analytically solvable cases, which show: (a) Why different higher order modes (HOM) in one cavity can couple and cannot be considered individually, even when their frequencies are separated by much more than the resonance widths of the HOMs. For the Cornell ERL as an example, it is noted that optimum advantage of coupled optics is taken when the cavities are designed with an $x$-$y$ HOM frequency splitting of above 50MHz. The threshold current is then far above the design current of this accelerator. (b) How the $x$-$y$ coupling in the particle optics determines when modes can be considered separately. (c) That the increase of the threshold current obtainable by coupled optics and polarized modes diminishes roughly with the square root of the HOMs' quality factors. Therefore the largest advantages are achieved with cavities that are not specifically designed to minimize these quality factors, e.g. by means of HOM absorbers. (d) How multiple-turn recirculation interferes with the threshold improvements obtained with a coupled optics. △ Less

Submitted 14 August, 2005; originally announced August 2005.

Coherent Beam-Beam Tune Shift of Unsymmetrical Beam-Beam Interactions with Large Beam-Beam Parameter

Authors: Lihui **, Jicong Shi, Georg H. Hoffstaetter

Abstract: Coherent beam-beam tune shift of unsymmetrical beam-beam interactions was studied experimentally and numerically in HERA where the lepton beam has a very large beam-beam parameter (up to $ξ_y=0.272$). Unlike the symmetrical case of beam-beam interactions, the ratio of the coherent and incoherent beam-beam tune shift in this unsymmetrical case of beam-beam interactions was found to decrease monot… ▽ More Coherent beam-beam tune shift of unsymmetrical beam-beam interactions was studied experimentally and numerically in HERA where the lepton beam has a very large beam-beam parameter (up to $ξ_y=0.272$). Unlike the symmetrical case of beam-beam interactions, the ratio of the coherent and incoherent beam-beam tune shift in this unsymmetrical case of beam-beam interactions was found to decrease monotonically with increase of the beam-beam parameter. The results of self-consistent beam-beam simulation, the linearized Vlasov equation, and the rigid-beam model were compared with the experimental measurement. It was found that the coherent beam-beam tune shifts measured in the experiment and calculated in the simulation agree remarkably well but they are much smaller than those calculated by the linearized Vlasov equation with the single-mode approximation or the rigid-beam model. The study indicated that the single-mode approximation in the linearization of Vlasov equation is not valid in the case of unsymmetrical beam-beam interactions. The rigid-beam model is valid only with a small beam-beam parameter in the case of unsymmetrical beam-beam interactions. △ Less

Submitted 10 September, 2004; originally announced September 2004.

Comments: 32 pages, 13 figures

Journal ref: Phys.Rev.E71:036501,2005

Orbit and Optics Improvement by Evaluating the Nonlinear BPM Response in CESR

Authors: Richard W. Helms, Georg H. Hoffstaetter

Abstract: We present an improved system for orbit and betatron phase measurement utilizing nonlinear models of BPM pickup response. We first describe the calculation of the BPM pickup signals as nonlinear functions of beam position using Green's reciprocity theorem with a two-dimensional formalism. We then describe the incorporation of these calculations in our beam position measurements by inverting the… ▽ More We present an improved system for orbit and betatron phase measurement utilizing nonlinear models of BPM pickup response. We first describe the calculation of the BPM pickup signals as nonlinear functions of beam position using Green's reciprocity theorem with a two-dimensional formalism. We then describe the incorporation of these calculations in our beam position measurements by inverting the nonlinear functions, giving us beam position as a function of the pickup signals, and how this is also used to improve our measurement of the betatron phase advance. Measurements are presented comparing this system with the linearized pickup response used historically at CESR. △ Less

Submitted 28 June, 2004; originally announced June 2004.

Comments: 7 pages, 11 figures

Journal ref: Phys.Rev.ST Accel.Beams 8:062802,2005

Optimal Axes of Siberian Snakes for Polarized Proton Acceleration

Authors: Georg H. Hoffstaetter

Abstract: Accelerating polarized proton beams and storing them for many turns can lead to a loss of polarization when accelerating through energies where a spin rotation frequency is in resonance with orbit oscillation frequencies. First-order resonance effects can be avoided by installing Siberian Snakes in the ring, devices which rotate the spin by 180 degrees around the snake axis while not changing th… ▽ More Accelerating polarized proton beams and storing them for many turns can lead to a loss of polarization when accelerating through energies where a spin rotation frequency is in resonance with orbit oscillation frequencies. First-order resonance effects can be avoided by installing Siberian Snakes in the ring, devices which rotate the spin by 180 degrees around the snake axis while not changing the beam's orbit significantly. For large rings, several Siberian Snakes are required. Here a criterion will be derived that allows to find an optimal choice of the snake axes. Rings with super-period four are analyzed in detail, and the HERA proton ring is used as an example for approximate four-fold symmetry. The proposed arrangement of Siberian Snakes matches their effects so that all spin-orbit coupling integrals vanish at all energies and therefore there is no first-order spin-orbit coupling at all for this choice, which I call snakes matching. It will be shown that in general at least eight Siberian Snakes are needed and that there are exactly four possibilities to arrange their axes. When the betatron phase advance between snakes is chosen suitably, four Siberian Snakes can be sufficient. To show that favorable choice of snakes have been found, polarized protons are tracked for part of HERA-p's acceleration cycle which shows that polarization is preserved best for the here proposed arrangement of Siberian Snakes. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Comments: 14 pages, 16 figures

Journal ref: Phys.Rev.STAccel.Beams7:121001,2004

Strength of Higher-Order Spin-Orbit Resonances

Authors: Georg H. Hoffstaetter, Mathias Vogt

Abstract: When polarized particles are accelerated in a synchrotron, the spin precession can be periodically driven by Fourier components of the electromagnetic fields through which the particles travel. This leads to resonant perturbations when the spin-precession frequency is close to a linear combination of the orbital frequencies. When such resonance conditions are crossed, partial depolarization or s… ▽ More When polarized particles are accelerated in a synchrotron, the spin precession can be periodically driven by Fourier components of the electromagnetic fields through which the particles travel. This leads to resonant perturbations when the spin-precession frequency is close to a linear combination of the orbital frequencies. When such resonance conditions are crossed, partial depolarization or spin flip can occur. The amount of polarization that survives after resonance crossing is a function of the resonance strength and the crossing speed. This function is commonly called the Froissart-Stora formula. It is very useful for predicting the amount of polarization after an acceleration cycle of a synchrotron or for computing the required speed of the acceleration cycle to maintain a required amount of polarization. However, the resonance strength could in general only be computed for first-order resonances and for synchrotron sidebands. When Siberian Snakes adjust the spin tune to be 1/2, as is required for high energy accelerators, first-order resonances do not appear and higher-order resonances become dominant. Here we will introduce the strength of a higher-order spin-orbit resonance, and also present an efficient method of computing it. Several tracking examples will show that the so computed resonance strength can indeed be used in the Froissart-Stora formula. HERA-p is used for these examples which demonstrate that our results are very relevant for existing accelerators. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Comments: 10 pages, 6 figures

Journal ref: Phys.Rev. E70 (2004) 056501

Synchro-Betatron Stop-Bands due to a Single Crab Cavity

Authors: Georg H. Hoffstaetter, Alexander W. Chao

Abstract: We analyze the stop-band due to crab cavities for horizontal tunes that are either close to integers or close to half integers. The latter case is relevant for today's electron/positron colliders. We compare this stop-band to that created by dispersion in an accelerating cavity and show that a single typical crab cavity creates larger stop-bands than a typical dispersion at an accelerating cavit… ▽ More We analyze the stop-band due to crab cavities for horizontal tunes that are either close to integers or close to half integers. The latter case is relevant for today's electron/positron colliders. We compare this stop-band to that created by dispersion in an accelerating cavity and show that a single typical crab cavity creates larger stop-bands than a typical dispersion at an accelerating cavity. We furthermore analyze whether it is beneficial to place the crab cavity at a position where the dispersion and its slope vanish. We find that this choice is worth while if the horizontal tune is close to a half integer, but not if it is close to an integer. Furthermore we find that stop-bands can be avoided when the horizontal tune is located at a favorable side of the integer or the half integer. While we are here concerned with the installation of a single crab cavity in a storage ring, we show that the stop-bands can be weakened, although not eliminated, significantly when two crab cavities per ring are chosen suitably. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Comments: 7 pages, 9 figures

Journal ref: Phys.Rev.ST Accel.Beams 7 (2004) 071002

Beam-Breakup Instability Theory for Energy Recovery Linacs

Authors: Georg H. Hoffstaetter, Ivan V. Bazarov

Abstract: Here we will derive the general theory of the beam-breakup instability in recirculating linear accelerators, in which the bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where bunches are recirculated at a decelerating phase of the RF wave and for other recirculator arrangements where different… ▽ More Here we will derive the general theory of the beam-breakup instability in recirculating linear accelerators, in which the bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where bunches are recirculated at a decelerating phase of the RF wave and for other recirculator arrangements where different RF phases are of an advantage. Furthermore it can be used for the analysis of phase errors of recirculated bunches. It is shown how the threshold current for a given linac can be computed and a remarkable agreement with tracking data is demonstrated. The general formulas are then analyzed for several analytically solvable cases, which show: (a) Why different higher order modes (HOM) in one cavity do not couple so that the most dangerous modes can be considered individually. (b) How different HOM frequencies have to be in order to consider them separately. (c) That no optics can cause the HOMs of two cavities to cancel. (d) How an optics can avoid the addition of the instabilities of two cavities. (e) How a HOM in a multiple-turn recirculator interferes with itself. Furthermore, a simple method to compute the orbit deviations produced by cavity misalignments has also been introduced. It is shown that the BBU instability always occurs before the orbit excursion becomes very large. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Comments: 12 pages, 6 figures

Journal ref: Phys.Rev.ST Accel.Beams 7 (2004) 054401

Beam Based Alignment of Interaction Region Magnets

Authors: G. H. Hoffstaetter, F. Willeke

Abstract: In conventional beam based alignment (BBA) procedures, the relative alignment of a quadrupole to a nearby beam position monitor is determined by finding a beam position in the quadrupole at which the closed orbit does not change when the quadrupole field is varied. The final focus magnets of the interaction regions (IR) of circular colliders often have some specialized properties that make it di… ▽ More In conventional beam based alignment (BBA) procedures, the relative alignment of a quadrupole to a nearby beam position monitor is determined by finding a beam position in the quadrupole at which the closed orbit does not change when the quadrupole field is varied. The final focus magnets of the interaction regions (IR) of circular colliders often have some specialized properties that make it difficult to perform conventional beam based alignment procedures. At the HERA interaction points, for example, these properties are: (a) The quadrupoles are quite strong and long. Therefore a thin lens approximation is quite imprecise. (b) The effects of angular magnet offsets become significant. (c) The possibilities to steer the beam are limited as long as the alignment is not within specifications. (d) The beam orbit has design offsets and design angles with respect to the axis of the low-beta quadrupoles. (e) Often quadrupoles do not have a beam position monitor in their vicinity. Here we present a beam based alignment procedure that determines the relative offset of the closed orbit from a quadrupole center without requiring large orbit changes or monitors next to the quadrupole. Taking into account the alignment angle allows us to reduce the sensitivity to optical errors by one to two orders of magnitude. We also show how the BBA measurements of all IR quadrupoles can be used to determine the global position of the magnets. The sensitivity to errors of this method is evaluated and its applicability to HERA is shown. △ Less

Submitted 22 May, 2002; originally announced May 2002.

Journal ref: Phys.Rev.ST Accel.Beams 5:102801,2002

Successive approximations for charged particle motion

Authors: Georg H. Hoffstaetter

Abstract: Single particle dynamics in electron microscopes, ion or electron lithographic instruments, particle accelerators, and particle spectrographs is described by weakly nonlinear ordinary differential equations. Therefore, the linear part of the equation of motion is usually solved and the nonlinear effects are then found in successive order by iteration methods. A Hamiltonian nature of these equati… ▽ More Single particle dynamics in electron microscopes, ion or electron lithographic instruments, particle accelerators, and particle spectrographs is described by weakly nonlinear ordinary differential equations. Therefore, the linear part of the equation of motion is usually solved and the nonlinear effects are then found in successive order by iteration methods. A Hamiltonian nature of these equations can lead to simplified computations of particle transport through an optical device when a suitable computational method is used. Many ingenious microscopic and lithographic devices were found by H. Rose and his group due to the simple structure of the eikonal method. In the area of accelerator physics the eikonal method has never become popular. Here I will therefore generalize the eikonal method and derive it from a Hamiltonian quite familiar to the accelerator physics community. With the event of high energy polarized electron beams and plans for high energy proton beams, nonlinear effects in spin motion have become important in high energy accelerators. I will introduce a successive approximation for the nonlinear effects in the coupled spin and orbit motion of charged particles which resembles some of the simplifications resulting from the eikonal method for the pure orbit motion. △ Less

Submitted 5 June, 2000; originally announced June 2000.

Report number: DESY 00-060

Journal ref: Ultramicroscopy 81 (2000) 111-121

Polarized Protons in HERA

Authors: Georg H. Hoffstaetter

Abstract: Polarized proton beams at HERA can currently only be produced by extracting a beam from a polarized source and then accelerating it in the three synchrotrons at DESY. In this paper, the processes which can depolarize a proton beam in circular accelerators are explained, devices which could avoid this depolarization in the DESY accelerator chain are described, and specific problems which become i… ▽ More Polarized proton beams at HERA can currently only be produced by extracting a beam from a polarized source and then accelerating it in the three synchrotrons at DESY. In this paper, the processes which can depolarize a proton beam in circular accelerators are explained, devices which could avoid this depolarization in the DESY accelerator chain are described, and specific problems which become important at the high energies of HERA are mentioned. At HERA's high energies, spin motion cannot be accurately described with the isolated resonance model which has been successfully used for lower energy rings. To illustrate the principles of more accurate simulations, the invariant spin field is introduced to describe the equilibrium polarization state of a beam and the changes during acceleration. It will be shown how linearized spin motion leads to a computationally quick approximation for the invariant spin field and how to amend this with more time consuming but accurate non-perturbative computations. Analysis with these techniques has allowed us to establish optimal Siberian Snake schemes for HERA. △ Less

Submitted 5 June, 2000; originally announced June 2000.

Report number: DESY 00-061

Journal ref: Nucl.Phys. A666 (2000) 203-213

III. The Permissible Equilibrium Polarisation Distribution in a Stored Proton Beam

Authors: D. P. Barber, K. Heinemann, G. H. Hoffstaetter, M. Vogt

Abstract: We illustrate the use of the invariant spin field for describing permissible equilibrium spin distributions in high energy spin polarised proton beams.} We illustrate the use of the invariant spin field for describing permissible equilibrium spin distributions in high energy spin polarised proton beams.} △ Less

Submitted 23 January, 1999; originally announced January 1999.

Comments: 3 pages with 2 embedded figures. Latex. Paper 3 of a set of 5. others are physics/9901038 physics/9901041 physics/9901043 physics/9901044

Report number: DESY 98-096C

A tracking algorithm for the stable spin polarization field in storage rings using stroboscopic averaging

Authors: K. Heinemann, G. H. Hoffstatter

Abstract: Polarized protons have never been accelerated to more than about $25$GeV. To achieve polarized proton beams in RHIC (250GeV), HERA (820GeV), and the TEVATRON (900GeV), ideas and techniques new to accelerator physics are needed. In this publication we will stress an important aspect of very high energy polarized proton beams, namely the fact that the equilibrium polarization direction can vary su… ▽ More Polarized protons have never been accelerated to more than about $25$GeV. To achieve polarized proton beams in RHIC (250GeV), HERA (820GeV), and the TEVATRON (900GeV), ideas and techniques new to accelerator physics are needed. In this publication we will stress an important aspect of very high energy polarized proton beams, namely the fact that the equilibrium polarization direction can vary substantially across the beam in the interaction region of a high energy experiment when no countermeasure is taken. Such a divergence of the polarization direction would not only diminish the average polarization available to the particle physics experiment, but it would also make the polarization involved in each collision analyzed in a detector strongly dependent on the phase space position of the interacting particle. In order to analyze and compensate this effect, methods for computing the equilibrium polarization direction are needed. In this paper we introduce the method of stroboscopic averaging, which computes this direction in a very efficient way. Since only tracking data is needed, our method can be implemented easily in existing spin tracking programs. Several examples demonstrate the importance of the spin divergence and the applicability of stroboscopic averaging. △ Less

Submitted 17 May, 1996; originally announced May 1996.

Comments: 39 pages

Report number: DESY-96-078

Journal ref: Phys.Rev.E54:4240-4255,1996