-
A quantum-dot heat engine operating close to the thermodynamic efficiency limits
Authors:
Martin Josefsson,
Artis Svilans,
Adam M. Burke,
Eric A. Hoffmann,
Sofia Fahlvik,
Claes Thelander,
Martin Leijnse,
Heiner Linke
Abstract:
Cyclical heat engines are a paradigm of classical thermodynamics, but are impractical for miniaturization because they rely on moving parts. A more recent concept is particle-exchange (PE) heat engines, which uses energy filtering to control a thermally driven particle flow between two heat reservoirs. As they do not require moving parts and can be realized in solid-state materials, they are suita…
▽ More
Cyclical heat engines are a paradigm of classical thermodynamics, but are impractical for miniaturization because they rely on moving parts. A more recent concept is particle-exchange (PE) heat engines, which uses energy filtering to control a thermally driven particle flow between two heat reservoirs. As they do not require moving parts and can be realized in solid-state materials, they are suitable for low-power applications and miniaturization. It was predicted that PE engines could reach the same thermodynamically ideal efficiency limits as those accessible to cyclical engines, but this prediction has not been verified experimentally. Here, we demonstrate a PE heat engine based on a quantum dot (QD) embedded into a semiconductor nanowire. We directly measure the engine's steady-state electric power output and combine it with the calculated electronic heat flow to determine the electronic efficiency $η$. We find that at the maximum power conditions, $η$ is in agreement with the Curzon-Ahlborn efficiency and that the overall maximum $η$ is in excess of 70$\%$ of the Carnot efficiency while maintaining a finite power output. Our results demonstrate that thermoelectric power conversion can, in principle, be achieved close to the thermodynamic limits, with direct relevance for future hot-carrier photovoltaics, on-chip coolers or energy harvesters for quantum technologies.
△ Less
Submitted 17 July, 2018; v1 submitted 2 October, 2017;
originally announced October 2017.
-
Nonlinear thermovoltage and thermocurrent in quantum dots
Authors:
Sofia Fahlvik Svensson,
Eric A Hoffmann,
Natthapon Nakpathomkun,
Phillip M Wu,
Hongqi Xu,
Henrik A Nilsson,
David Sánchez,
Vyacheslavs Kashcheyevs,
Heiner Linke
Abstract:
Quantum dots are model systems for quantum thermoelectric behavior because of the ability to control and measure the effects of electron-energy filtering and quantum confinement on thermoelectric properties. Interestingly, nonlinear thermoelectric properties of such small systems can modify the efficiency of thermoelectric power conversion. Using quantum dots embedded in semiconductor nanowires, w…
▽ More
Quantum dots are model systems for quantum thermoelectric behavior because of the ability to control and measure the effects of electron-energy filtering and quantum confinement on thermoelectric properties. Interestingly, nonlinear thermoelectric properties of such small systems can modify the efficiency of thermoelectric power conversion. Using quantum dots embedded in semiconductor nanowires, we measure thermovoltage and thermocurrent that are strongly nonlinear in the applied thermal bias. We show that most of the observed nonlinear effects can be understood in terms of a renormalization of the quantum-dot energy levels as a function of applied thermal bias and provide a theoretical model of the nonlinear thermovoltage taking renormalization into account. Furthermore, we propose a theory that explains a possible source of the observed, pronounced renormalization effect by the melting of Kondo correlations in the mixed-valence regime. The ability to control nonlinear thermoelectric behavior expands the range in which quantum thermoelectric effects may be used for efficient energy conversion.
△ Less
Submitted 2 July, 2013;
originally announced July 2013.
-
Large nuclear spin polarization in gate-defined quantum dots using a single-domain nanomagnet
Authors:
Gunnar Petersen,
Eric A. Hoffmann,
Dieter Schuh,
Werner Wegscheider,
Geza Giedke,
Stefan Ludwig
Abstract:
The electron-nuclei (hyperfine) interaction is central to spin qubits in solid state systems. It can be a severe decoherence source but also allows dynamic access to the nuclear spin states. We study a double quantum dot exposed to an on-chip single-domain nanomagnet and show that its inhomogeneous magnetic field crucially modifies the complex nuclear spin dynamics such that the Overhauser field t…
▽ More
The electron-nuclei (hyperfine) interaction is central to spin qubits in solid state systems. It can be a severe decoherence source but also allows dynamic access to the nuclear spin states. We study a double quantum dot exposed to an on-chip single-domain nanomagnet and show that its inhomogeneous magnetic field crucially modifies the complex nuclear spin dynamics such that the Overhauser field tends to compensate external magnetic fields. This turns out to be beneficial for polarizing the nuclear spin ensemble. We reach a nuclear spin polarization of ~50%, unrivaled in lateral dots, and explain our manipulation technique using a comprehensive rate equation model.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Heat flow in InAs/InP heterostructure nanowires
Authors:
Jason Matthews,
Eric A. Hoffmann,
Carsten Weber,
Andreas Wacker,
Heiner Linke
Abstract:
The transfer of heat between electrons and phonons plays a key role for thermal management in future nanowire-based devices, but only a few experimental measurements of electron-phonon (e-ph) coupling in nanowires are available. Here, we combine experimental temperature measurements on an InAs/InP heterostructure nanowire system with finite element modeling (FEM) to extract information on heat flo…
▽ More
The transfer of heat between electrons and phonons plays a key role for thermal management in future nanowire-based devices, but only a few experimental measurements of electron-phonon (e-ph) coupling in nanowires are available. Here, we combine experimental temperature measurements on an InAs/InP heterostructure nanowire system with finite element modeling (FEM) to extract information on heat flow mediated by e-ph coupling. We find that the electron and phonon temperatures in our system are highly coupled even at temperatures as low as 2 K. Additionally, we find evidence that the usual power-law temperature dependence of electron-phonon coupling may not correctly describe the coupling in nanowires and show that this result is consistent with previous research on similar one-dimensional electron systems. We also compare the strength of the observed e-ph coupling to a theoretical analysis of e-ph interaction in InAs nanowires, which predicts a significantly weaker coupling strength than observed experimentally.
△ Less
Submitted 21 September, 2012;
originally announced September 2012.
-
Lineshape of the thermopower of quantum dots
Authors:
S. Fahlvik Svensson,
A. I. Persson,
E. A. Hoffmann,
N. Nakpathomkun,
H. A. Nilsson,
H. Q. Xu,
L. Samuelson,
H. Linke
Abstract:
Quantum dots are an important model system for thermoelectric phenomena, and may be used to enhance the thermal-to-electric energy conversion efficiency in functional materials. It is therefore important to obtain a detailed understanding of a quantum-dot's thermopower as a function of the Fermi energy. However, so far it has proven difficult to take effects of co-tunnelling into account in the in…
▽ More
Quantum dots are an important model system for thermoelectric phenomena, and may be used to enhance the thermal-to-electric energy conversion efficiency in functional materials. It is therefore important to obtain a detailed understanding of a quantum-dot's thermopower as a function of the Fermi energy. However, so far it has proven difficult to take effects of co-tunnelling into account in the interpretation of experimental data. Here we show that a single-electron tunnelling model, using knowledge of the dot's electrical conductance which in fact includes all-order co-tunneling effects, predicts the thermopower of quantum dots as a function of the relevant energy scales, in very good agreement with experiment.
△ Less
Submitted 3 October, 2011;
originally announced October 2011.
-
Mesoscopic Thermovoltage Measurement Design
Authors:
E. A. Hoffmann,
H. A. Nilsson,
L. Samuelson,
H. Linke
Abstract:
Quantitative thermoelectric measurements in the mesoscopic regime require accurate knowledge of temperature, thermovoltage, and device energy scales. We consider the effect of a finite load resistance on thermovoltage measurements of InAs/InP heterostructure nanowires. Load resistance and ac attenuation distort the measured thermovoltage therefore complicating the evaluation of device performance.…
▽ More
Quantitative thermoelectric measurements in the mesoscopic regime require accurate knowledge of temperature, thermovoltage, and device energy scales. We consider the effect of a finite load resistance on thermovoltage measurements of InAs/InP heterostructure nanowires. Load resistance and ac attenuation distort the measured thermovoltage therefore complicating the evaluation of device performance. Understanding these effects improves experimental design and data interpretation.
△ Less
Submitted 5 September, 2011;
originally announced September 2011.
-
Measuring Temperature Gradients over Nanometer Length Scales
Authors:
E. A. Hoffmann,
H. A. Nilsson,
J. E. Matthews,
N. Nakpathomkun,
A. I. Persson,
L. Samuelson,
H. Linke
Abstract:
When a quantum dot is subjected to a thermal gradient, the temperature of electrons entering the dot can be determined from the dot's thermocurrent if the conductance spectrum and background temperature are known. We demonstrate this technique by measuring the temperature difference across a 15 nm quantum dot embedded in a nanowire. This technique can be used when the dot's energy states are sep…
▽ More
When a quantum dot is subjected to a thermal gradient, the temperature of electrons entering the dot can be determined from the dot's thermocurrent if the conductance spectrum and background temperature are known. We demonstrate this technique by measuring the temperature difference across a 15 nm quantum dot embedded in a nanowire. This technique can be used when the dot's energy states are separated by many kT and will enable future quantitative investigations of electron-phonon interaction, nonlinear thermoelectric effects, and the effciency of thermoelectric energy conversion in quantum dots.
△ Less
Submitted 15 January, 2009;
originally announced January 2009.
-
Quantum-dot thermometry
Authors:
E. A. Hoffmann,
N. Nakpathomkun,
A. I. Persson,
H. A. Nilsson,
L. Samuelson,
H. Linke
Abstract:
We present a method for the measurement of a temperature differential across a single quantum dot that has transmission resonances that are separated in energy by much more than the thermal energy. We determine numerically that the method is accurate to within a few percent across a wide range of parameters. The proposed method measures the temperature of the electrons that enter the quantum dot…
▽ More
We present a method for the measurement of a temperature differential across a single quantum dot that has transmission resonances that are separated in energy by much more than the thermal energy. We determine numerically that the method is accurate to within a few percent across a wide range of parameters. The proposed method measures the temperature of the electrons that enter the quantum dot and will be useful in experiments that aim to test theory which predicts quantum dots are highly-efficient thermoelectrics.
△ Less
Submitted 11 January, 2008; v1 submitted 5 October, 2007;
originally announced October 2007.
