-
Experimental Observation of Localized Interfacial Phonon Modes
Authors:
Zhe Cheng,
Ruiyang Li,
Xingxu Yan,
Glenn Jernigan,
**g**g Shi,
Michael E. Liao,
Nicholas J. Hines,
Chaitanya A. Gadre,
Juan Carlos Idrobo,
Eungkyu Lee,
Karl D. Hobart,
Mark S. Goorsky,
Xiaoqing Pan,
Tengfei Luo,
Samuel Graham
Abstract:
Interfaces impede heat flow in micro/nanostructured systems. Conventional theories for interfacial thermal transport were derived based on bulk phonon properties of the materials making up the interface without explicitly considering the atomistic interfacial details, which are found critical to correctly describing thermal boundary conductance (TBC). Recent theoretical studies predicted the exist…
▽ More
Interfaces impede heat flow in micro/nanostructured systems. Conventional theories for interfacial thermal transport were derived based on bulk phonon properties of the materials making up the interface without explicitly considering the atomistic interfacial details, which are found critical to correctly describing thermal boundary conductance (TBC). Recent theoretical studies predicted the existence of localized phonon modes at the interface which can play an important role in understanding interfacial thermal transport. However, experimental validation is still lacking. Through a combination of Raman spectroscopy and high-energy resolution electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope, we report the first experimental observation of localized interfacial phonon modes at ~12 THz at a high-quality epitaxial Si-Ge interface. These modes are further confirmed using molecular dynamics simulations with a high-fidelity neural network interatomic potential, which also yield TBC agreeing well with that measured from time-domain thermoreflectance (TDTR) experiments. Simulations find that the interfacial phonon modes have obvious contribution to the total TBC. Our findings may significantly contribute to the understanding of interfacial thermal transport physics and have impact on engineering TBC at interfaces in applications such as electronics thermal management and thermoelectric energy conversion.
△ Less
Submitted 29 May, 2021;
originally announced May 2021.
-
Integration of Atomic Layer Epitaxy Crystalline Ga2O3 on Diamond for Thermal Management
Authors:
Zhe Cheng,
Virginia D. Wheeler,
Tingyu Bai,
**g**g Shi,
Marko J. Tadjer,
Tatyana Feygelson,
Karl D. Hobart,
Mark S. Goorsky,
Samuel Graham
Abstract:
Ga2O3 has attracted great attention for electronic device applications due to its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt. However, its thermal conductivity is significantly lower than that of other wide bandgap semiconductors, which will impact its ability to be used in high power density applications. Thermal management in Ga2O3…
▽ More
Ga2O3 has attracted great attention for electronic device applications due to its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt. However, its thermal conductivity is significantly lower than that of other wide bandgap semiconductors, which will impact its ability to be used in high power density applications. Thermal management in Ga2O3 electronics will be the key for device reliability, especially for high power and high frequency devices. Similar to the method of cooling GaN-based high electron mobility transistors by integrating it with high thermal conductivity diamond substrates, this work studies the possibility of heterogeneous integration of Ga2O3 with diamond for thermal management of Ga2O3 devices. In this work, Ga2O3 was deposited onto single crystal diamond substrates by ALD and the thermal properties of ALD-Ga2O3 thin films and Ga2O3-diamond interfaces with different interface pretreatments were measured by TDTR. We observed very low thermal conductivity of these Ga2O3 thin films due to the extensive phonon grain boundary scattering resulting from the nanocrystalline nature of the Ga2O3 film. However, the measured thermal boundary conductance (TBC) of the Ga2O3-diamond interfaces are about 10 times larger than that of the Van der Waals bonded Ga2O3 diamond interfaces, which indicates the significant impact of interface bonding on TBC. Furthermore, the TBC of the Ga-rich and O-rich Ga2O3-diamond interfaces are about 20% smaller than that of the clean interface, indicating interface chemistry affects interfacial thermal transport. Overall, this study shows that a high TBC can be obtained from strong interfacial bonds across Ga2O3-diamond interfaces, providing a promising route to improving the heat dissipation from Ga2O3 devices.
△ Less
Submitted 23 August, 2019;
originally announced August 2019.
-
Thermal Conductance across beta-Ga2O3-diamond Van der Waals Heterogeneous Interfaces
Authors:
Zhe Cheng,
Luke Yates,
**g**g Shi,
Marko J. Tadjer,
Karl D. Hobart,
Samuel Graham
Abstract:
Because of its ultrawide bandgap, high breakdown electric field, and large area affordable substrates grown from the melt, beta Ga2O3 has attracted great attention recently for potential applications of power electronics. However, its thermal conductivity is significantly lower than those of other wide bandgap semiconductors, such as AlN, SiC, GaN, and diamond. To ensure reliable operation with mi…
▽ More
Because of its ultrawide bandgap, high breakdown electric field, and large area affordable substrates grown from the melt, beta Ga2O3 has attracted great attention recently for potential applications of power electronics. However, its thermal conductivity is significantly lower than those of other wide bandgap semiconductors, such as AlN, SiC, GaN, and diamond. To ensure reliable operation with minimal selfheating at high power, proper thermal management is even more essential for Ga2O3 devices. Similarly to the past approaches aiming to alleviate selfheating in GaN HEMTs, a possible solution has been to integrate thin Ga2O3 membranes with diamond to fabricate Ga2O3 on diamond lateral MESFET or MOSFET devices by taking advantage of the ultra high thermal conductivity of diamond. Even though the TBC between wide bandgap semiconductor devices such as GaN HEMTs and a diamond substrate is of primary importance for heat dissipation in these devices, fundamental understanding of the Ga2O3 diamond thermal interface is still missing. In this work, we study the thermal transport across the interfaces of Ga2O3 exfoliated onto a single crystal diamond. The Van der Waals bonded Ga2O3 diamond TBC is measured to be 17 MWm2K1, which is comparable to the TBC of several physical vapor deposited metals on diamond. A Landauer approach is used to help understand phonon transport across perfect Ga2O3 diamond interface, which in turn sheds light on the possible TBC one could achieve with an optimized interface. A reduced thermal conductivity of the Ga2O3 nanomembrane is also observed due to additional phonon membrane boundary scattering. The impact of the Ga2O3substrate TBC and substrate thermal conductivity on the thermal performance of a power device are modeled and discussed.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Tunable Thermal Energy Transport across Diamond Membranes and Diamond-Si Interfaces by Nanoscale Graphoepitaxy
Authors:
Zhe Cheng,
Tingyu Bai,
**g**g Shi,
Tianli Feng,
Yekan Wang,
Matthew Mecklenburg,
Chao Li,
Karl D. Hobart,
Tatyana I. Feygelson,
Marko J. Tadjer,
Bradford B. Pate,
Brian M. Foley,
Luke Yates,
Sokrates T. Pantelides,
Baratunde A. Cola,
Mark Goorsky,
Samuel Graham
Abstract:
The development of electronic devices, especially those that involve heterogeneous integration of materials, has led to increased challenges in addressing their thermal operational-temperature demands. The heat flow in these systems is significantly influenced or even dominated by thermal boundary resistance at interface between dissimilar materials. However, controlling and tuning heat transport…
▽ More
The development of electronic devices, especially those that involve heterogeneous integration of materials, has led to increased challenges in addressing their thermal operational-temperature demands. The heat flow in these systems is significantly influenced or even dominated by thermal boundary resistance at interface between dissimilar materials. However, controlling and tuning heat transport across an interface and in the adjacent materials has so far drawn limited attention. In this work, we grow chemical-vapor-deposited (CVD) diamond on silicon substrates by graphoepitaxy and experimentally demonstrate tunable thermal transport across diamond membranes and diamond-silicon interfaces. We observed the highest diamond-silicon thermal boundary conductance (TBC) measured to date and increased diamond thermal conductivity due to strong grain texturing in the diamond near the interface. Additionally, non-equilibrium molecular-dynamics (NEMD) simulations and a Landauer approach are used to understand the diamond-silicon TBC. These findings pave the way for tuning or increasing thermal conductance in heterogeneously integrated electronics that involve polycrystalline materials and will impact applications including electronics thermal management and diamond growth.
△ Less
Submitted 7 January, 2019; v1 submitted 30 July, 2018;
originally announced July 2018.
-
Technique for the Dry Transfer of Epitaxial Graphene onto Arbitrary Substrates
Authors:
Joshua D. Caldwell,
Travis J. Anderson,
James C. Culbertson,
Glenn G. Jernigan,
Karl D. Hobart,
Fritz J. Kub,
Marko J. Tadjer,
Joseph L. Tedesco,
Jennifer K. Hite,
Michael A. Mastro,
Rachael L. Myers-Ward,
Charles R. Eddy Jr.,
Paul M. Campbell,
D. Kurt Gaskill
Abstract:
In order to make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We further report on the impact of this process on the electrical properties of the EG films. This pr…
▽ More
In order to make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We further report on the impact of this process on the electrical properties of the EG films. This process enables EG films to be used in flexible electronic devices or as optically transparent contacts.
△ Less
Submitted 14 October, 2009;
originally announced October 2009.
