-
Electric and magnetic dipole strength in 112,114,116,118,120,124Sn
Authors:
S. Bassauer,
P. von Neumann-Cosel,
P. -G. Reinhard,
A. Tamii,
S. Adachi,
C. A. Bertulani,
P. Y. Chan,
A. D'Alessio,
H. Fujioka,
H. Fujita,
Y. Fujita,
G. Gey,
M. Hilcker,
T. H. Hoang,
A. Inoue,
J. Isaak,
C. Iwamoto,
T. Klaus,
N. Kobayashi,
Y. Maeda,
M. Matsuda,
N. Nakatsuka,
S. Noji,
H. J. Ong,
I. Ou
, et al. (11 additional authors not shown)
Abstract:
Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295 MeV beam covering laboratory angles 0°-6° and excitation energies 6-22 MeV. Cross sections due to E1 and M1 excitations were extracted with a multipole decomposition analysis and then converted to reduced transition probabilities with the "virtual photon method" for E1 and the "unit…
▽ More
Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295 MeV beam covering laboratory angles 0°-6° and excitation energies 6-22 MeV. Cross sections due to E1 and M1 excitations were extracted with a multipole decomposition analysis and then converted to reduced transition probabilities with the "virtual photon method" for E1 and the "unit cross section method" for M1 excitations, respectively. Including a theory-aided correction for the high excitation energy region not covered experimentally, the electric dipole polarizability was determined from the E1 strength distributions. Total photoabsorption cross sections derived from the E1 and M1 strength distributions show significant differences compared to those from previous ($γ$,xn) experiments in the energy region of the isocvector giant dipole resonance (IVGDR). The widths of the IVGDR deduced from the present data with a Lorentz parameterization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The E1 strengths below neutron threshold show fair agreement with results from ($γ$,$γ$') experiments on 112,116,120,124Sn in the energy region between 6 and 7 MeV. At higher excitation energies large differences are observed pointing to a different nature of the excited states with small ground state branching ratios. The isovector spin-M1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei.
△ Less
Submitted 12 July, 2020;
originally announced July 2020.
-
iRDRC: An Intelligent Real-time Dual-functional Radar-Communication System for Automotive Vehicles
Authors:
Nguyen Quang Hieu,
Dinh Thai Hoang,
Nguyen Cong Luong,
Dusit Niyato
Abstract:
This letter introduces an intelligent Real-time Dual-functional Radar-Communication (iRDRC) system for autonomous vehicles (AVs). This system enables an AV to perform both radar and data communications functions to maximize bandwidth utilization as well as significantly enhance safety. In particular, the data communications function allows the AV to transmit data, e.g., of current traffic, to edge…
▽ More
This letter introduces an intelligent Real-time Dual-functional Radar-Communication (iRDRC) system for autonomous vehicles (AVs). This system enables an AV to perform both radar and data communications functions to maximize bandwidth utilization as well as significantly enhance safety. In particular, the data communications function allows the AV to transmit data, e.g., of current traffic, to edge computing systems and the radar function is used to enhance the reliability and reduce the collision risks of the AV, e.g., under bad weather conditions. The problem of the iRDRC is to decide when to use the communication mode or the radar mode to maximize the data throughput while minimizing the miss detection probability of unexpected events given the uncertainty of surrounding environment. To solve the problem, we develop a deep reinforcement learning algorithm that allows the AV to quickly obtain the optimal policy without requiring any prior information about the environment. Simulation results show that the proposed scheme outperforms baseline schemes in terms of data throughput, miss detection probability, and convergence rate.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Detectability of Thermal Emission from Sub-Relativistic Objects
Authors:
Thiem Hoang,
Abraham Loeb
Abstract:
We calculate the surface temperature and the resulting brightness of sub-relativistic objects moving through the Solar system due to collisional heating by gas and radiative heating by solar radiation. The thermal emission from objects of size $\gtrsim 100$ m and speed of $\gtrsim 0.1c$, can be detected by the upcoming {\it James Webb Space Telescope} out to a distance of $\sim 100$ au. Future sur…
▽ More
We calculate the surface temperature and the resulting brightness of sub-relativistic objects moving through the Solar system due to collisional heating by gas and radiative heating by solar radiation. The thermal emission from objects of size $\gtrsim 100$ m and speed of $\gtrsim 0.1c$, can be detected by the upcoming {\it James Webb Space Telescope} out to a distance of $\sim 100$ au. Future surveys could therefore set interesting limits on the abundance of fast-moving interstellar objects or spacecraft.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
A global-in-time domain decomposition method for the coupled nonlinear Stokes and Darcy flows
Authors:
Thi-Thao-Phuong Hoang,
Hyesuk Lee
Abstract:
We study a decoupling iterative algorithm based on domain decomposition for the time-dependent nonlinear Stokes-Darcy model, in which different time steps can be used in the flow region and in the porous medium. The coupled system is formulated as a space-time interface problem based on the interface condition for mass conservation. The nonlinear interface problem is then solved by a nested iterat…
▽ More
We study a decoupling iterative algorithm based on domain decomposition for the time-dependent nonlinear Stokes-Darcy model, in which different time steps can be used in the flow region and in the porous medium. The coupled system is formulated as a space-time interface problem based on the interface condition for mass conservation. The nonlinear interface problem is then solved by a nested iteration approach which involves, at each Newton iteration, the solution of a linearized interface problem and, at each Krylov iteration, parallel solution of time-dependent linearized Stokes and Darcy problems. Consequently, local discretizations in time (and in space) can be used to efficiently handle multiphysics systems of coupled equations evolving at different temporal scales. Numerical results with nonconforming time grids are presented to illustrate the performance of the proposed method.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333
Authors:
Yasuo Doi,
Tetsuo Hasegawa,
Ray S. Furuya,
Simon Coudé,
Charles L. H. Hull,
Doris Arzoumanian,
Pierre Bastien,
Michael Chun-Yuan Chen,
James di Francesco,
Rachel Friesen,
Martin Houde,
Shu-ichiro Inutsuka,
Steve Mairs,
Masafumi Matsumura,
Takashi Onaka,
Sarah Sadavoy,
Yoshito Shimajiri,
Mehrnoosh Tahani,
Kohji Tomisaka,
Chakali Eswaraiah,
Patrick M. Koch,
Kate Pattle,
Chang Won Lee,
Motohide Tamura,
David Berry
, et al. (113 additional authors not shown)
Abstract:
We present new observations of the active star-formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (~1.5 pc x 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary…
▽ More
We present new observations of the active star-formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (~1.5 pc x 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ~1 pc and remains continuous from the scales of filaments (~0.1 pc) to that of protostellar envelopes (~0.005 pc or ~1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.
△ Less
Submitted 21 July, 2020; v1 submitted 30 June, 2020;
originally announced July 2020.
-
Dichotomizing $k$-vertex-critical $H$-free graphs for $H$ of order four
Authors:
Ben Cameron,
Chính T. Hoàng,
Joe Sawada
Abstract:
For $k \geq 3$, we prove (i) there is a finite number of $k$-vertex-critical $(P_2+\ell P_1)$-free graphs and (ii) $k$-vertex-critical $(P_3+P_1)$-free graphs have at most $2k-1$ vertices. Together with previous research, these results imply the following characterization where $H$ is a graph of order four: There is a finite number of $k$-vertex-critical $H$-free graphs for fixed $k \geq 5$ if and…
▽ More
For $k \geq 3$, we prove (i) there is a finite number of $k$-vertex-critical $(P_2+\ell P_1)$-free graphs and (ii) $k$-vertex-critical $(P_3+P_1)$-free graphs have at most $2k-1$ vertices. Together with previous research, these results imply the following characterization where $H$ is a graph of order four: There is a finite number of $k$-vertex-critical $H$-free graphs for fixed $k \geq 5$ if and only if $H$ is one of $\overline{K_4}, P_4, P_2 + 2P_1$, or $P_3 + P_1$. Our results imply the existence of new polynomial-time certifying algorithms for deciding the $k$-colorability of $(P_2+\ell P_1)$-free graphs for fixed $k$.
△ Less
Submitted 30 June, 2020;
originally announced July 2020.
-
Alignment of irregular grains by radiative torques: efficiency study
Authors:
Joonas Herranen,
A. Lazarian,
Thiem Hoang
Abstract:
We study the efficiency of grain alignment by radiative torques (RATs) for an ensemble of irregular grains. The grains are modeled as ensembles of oblate and prolate spheroids, deformed as Gaussian random ellipsoids, and their scattering interactions are solved using numerically exact methods. We define the fraction of the grains that both rotate fast and demonstrate perfect alignment with grain l…
▽ More
We study the efficiency of grain alignment by radiative torques (RATs) for an ensemble of irregular grains. The grains are modeled as ensembles of oblate and prolate spheroids, deformed as Gaussian random ellipsoids, and their scattering interactions are solved using numerically exact methods. We define the fraction of the grains that both rotate fast and demonstrate perfect alignment with grain long axes perpendicular to the magnetic field. We demonstrate that for typical interstellar conditions the degree of alignment arising from the RAT mechanism is significantly larger than that arising from the Davis-Greenstein (DG) mechanism based on paramagnetic relaxation. We quantify a factor related to the efficacy of alignment and show that it is related to a $q_\mathrm{max}$-factor of analytical model (AMO) of the RAT theory. Our results indicate that the RAT alignment can potentially be sufficiently strong and to explain observations even if grains do not have magnetic inclusions.
△ Less
Submitted 26 April, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Rotational Disruption of Astrophysical Dust and Ice: Theory and Applications
Authors:
Thiem Hoang
Abstract:
Dust is an essential component of the interstellar medium (ISM) and plays an important role in many different astrophysical processes and phenomena. Traditionally, dust grains are known to be destroyed by thermal sublimation, Coulomb explosions, sputtering, and shattering. The first two mechanisms arise from the interaction of dust with intense radiation fields and high-energy photons (extreme UV)…
▽ More
Dust is an essential component of the interstellar medium (ISM) and plays an important role in many different astrophysical processes and phenomena. Traditionally, dust grains are known to be destroyed by thermal sublimation, Coulomb explosions, sputtering, and shattering. The first two mechanisms arise from the interaction of dust with intense radiation fields and high-energy photons (extreme UV), which work in a limited astrophysical environment. The present review is focused on a new destruction mechanism present in the {\it dust-radiation interaction} that is effective in a wide range of radiation fields and has ubiquitous applications in astrophysics. We first describe this new mechanism of grain destruction, namely rotational disruption induced by Radiative Torques (RATs) or RAdiative Torque Disruption (RATD). We then discuss rotational disruption of nanoparticles by mechanical torques due to supersonic motion of grains relative to the ambient gas, which is termed MEchanical Torque Disruption (METD). These two new mechanisms modify properties of dust and ice (e.g., size distribution and mass), which affects observational properties, including dust extinction, thermal and nonthermal emission, and polarization. We present various applications of the RATD and METD mechanisms for different environments, including the ISM, star-forming regions, astrophysical transients, and surface astrochemistry.
△ Less
Submitted 5 July, 2020; v1 submitted 29 June, 2020;
originally announced June 2020.
-
Temperature- and Polarization- Dependent Optical Properties of Single Si2Te3 Nanoplates
Authors:
Jiyang Chen,
Romakanta Bhattarai,
**gbiao Cui,
Xiao Shen,
Thang Hoang
Abstract:
We report a combined experimental and computational study of the optical properties of individual silicon telluride (Si2Te3) nanoplates. The p-type semiconductor Si2Te3 has a unique layered crystal structure with hexagonal closed-packed Te sublattices and Si-Si dimers occupying octahedral intercalation sites. The orientation of the silicon dimers leads to unique optical and electronic properties.…
▽ More
We report a combined experimental and computational study of the optical properties of individual silicon telluride (Si2Te3) nanoplates. The p-type semiconductor Si2Te3 has a unique layered crystal structure with hexagonal closed-packed Te sublattices and Si-Si dimers occupying octahedral intercalation sites. The orientation of the silicon dimers leads to unique optical and electronic properties. Two-dimensional Si2Te3 nanoplates with thicknesses of hundreds of nanometers and lateral sizes of tens of micrometers are synthesized by a chemical vapor deposition technique. At temperatures below 150 K, the Si2Te3 nanoplates exhibit a direct band structure with a band gap energy of 2.394 eV at 7 K and an estimated free exciton binding energy of 150 meV. Polarized reflection measurements at different temperatures show anisotropy in the absorption coefficient due to an anisotropic orientation of the silicon dimers, which is in excellent agreement with theoretical calculations of the dielectric functions. Polarized Raman measurements of single Si2Te3 nanoplates at different temperatures reveal various vibrational modes, which agree with density functional perturbation theory calculations. The unique structural and optical properties of nanostructured Si2Te3 hold great potential applications in optoelectronics and chemical sensing.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
Destruction of molecular hydrogen ice and Implications for 1I/2017 U1 (`Oumuamua)
Authors:
Thiem Hoang,
Abraham Loeb
Abstract:
The first interstellar object observed in our solar system, 1I/2017 U1 (`Oumuamua), exhibited a number of peculiar properties, including extreme elongation and acceleration excess. Recently, \cite{Seligman:2020vb} proposed that the object was made out of molecular hydrogen (H$_{2}$) ice. The question is whether H$_2$ objects could survive their travel from the birth sites to the solar system. Here…
▽ More
The first interstellar object observed in our solar system, 1I/2017 U1 (`Oumuamua), exhibited a number of peculiar properties, including extreme elongation and acceleration excess. Recently, \cite{Seligman:2020vb} proposed that the object was made out of molecular hydrogen (H$_{2}$) ice. The question is whether H$_2$ objects could survive their travel from the birth sites to the solar system. Here we study destruction processes of icy H$_2$ objects through their journey from giant molecular clouds (GMCs) to the interstellar medium (ISM) and the solar system, owing to interstellar radiation, gas and dust, and cosmic rays. We find that thermal sublimation due to heating by starlight can destroy `Oumuamua-size objects in less than 10 Myr. Thermal sublimation by collisional heating in GMCs could destroy H$_2$ objects of `Oumuamua-size before their escape into the ISM. Most importantly, the formation of icy grains rich in H$_2$ is unlikely to occur in dense environments because collisional heating raises the temperature of the icy grains, so that thermal sublimation rapidly destroys the H$_2$ mantle before grain growth.
△ Less
Submitted 11 August, 2020; v1 submitted 14 June, 2020;
originally announced June 2020.
-
Time Scheduling and Energy Trading for Heterogeneous Wireless-Powered and Backscattering-based IoT Networks
Authors:
Ngoc-Tan Nguyen,
Diep N. Nguyen,
Dinh Thai Hoang,
Nguyen Van Huynh,
Nam-Hoang Nguyen,
Quoc-Tuan Nguyen,
Eryk Dutkiewicz
Abstract:
Future IoT networks consist of heterogeneous types of IoT devices (with various communication types and energy constraints) which are assumed to belong to an IoT service provider (ISP). To power backscattering-based and wireless-powered devices, the ISP has to contract with an energy service provider (ESP). This article studies the strategic interactions between the ISP and its ESP and their impli…
▽ More
Future IoT networks consist of heterogeneous types of IoT devices (with various communication types and energy constraints) which are assumed to belong to an IoT service provider (ISP). To power backscattering-based and wireless-powered devices, the ISP has to contract with an energy service provider (ESP). This article studies the strategic interactions between the ISP and its ESP and their implications on the joint optimal time scheduling and energy trading for heterogeneous devices. To that end, we propose an economic framework using the Stackelberg game to maximize the network throughput and energy efficiency of both the ISP and ESP. Specifically, the ISP leads the game by sending its optimal service time and energy price request (that maximizes its profit) to the ESP. The ESP then optimizes and supplies the transmission power which satisfies the ISP's request (while maximizing ESP's utility). To obtain the Stackelberg equilibrium (SE), we apply a backward induction technique which first derives a closed-form solution for the ESP. Then, to tackle the non-convex optimization problem for the ISP, we leverage the block coordinate descent and convex-concave procedure techniques to design two partitioning schemes (i.e., partial adjustment (PA) and joint adjustment (JA)) to find the optimal energy price and service time that constitute local SEs. Numerical results reveal that by jointly optimizing the energy trading and the time allocation for heterogeneous IoT devices, one can achieve significant improvements in terms of the ISP's profit compared with those of conventional transmission methods. Different tradeoffs between the ESP's and ISP's profits and complexities of the PA/JA schemes can also be numerically tuned. Simulations also show that the obtained local SEs approach the socially optimal welfare when the ISP's benefit per transmitted bit is higher than a given threshold.
△ Less
Submitted 31 August, 2020; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Optimization-driven Deep Reinforcement Learning for Robust Beamforming in IRS-assisted Wireless Communications
Authors:
Jiaye Lin,
Yuze Zou,
Xiaoru Dong,
Shimin Gong,
Dinh Thai Hoang,
Dusit Niyato
Abstract:
Intelligent reflecting surface (IRS) is a promising technology to assist downlink information transmissions from a multi-antenna access point (AP) to a receiver. In this paper, we minimize the AP's transmit power by a joint optimization of the AP's active beamforming and the IRS's passive beamforming. Due to uncertain channel conditions, we formulate a robust power minimization problem subject to…
▽ More
Intelligent reflecting surface (IRS) is a promising technology to assist downlink information transmissions from a multi-antenna access point (AP) to a receiver. In this paper, we minimize the AP's transmit power by a joint optimization of the AP's active beamforming and the IRS's passive beamforming. Due to uncertain channel conditions, we formulate a robust power minimization problem subject to the receiver's signal-to-noise ratio (SNR) requirement and the IRS's power budget constraint. We propose a deep reinforcement learning (DRL) approach that can adapt the beamforming strategies from past experiences. To improve the learning performance, we derive a convex approximation as a lower bound on the robust problem, which is integrated into the DRL framework and thus promoting a novel optimization-driven deep deterministic policy gradient (DDPG) approach. In particular, when the DDPG algorithm generates a part of the action (e.g., passive beamforming), we can use the model-based convex approximation to optimize the other part (e.g., active beamforming) of the action more efficiently. Our simulation results demonstrate that the optimization-driven DDPG algorithm can improve both the learning rate and reward performance significantly compared to the conventional model-free DDPG algorithm.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
CHEER: Rich Model Helps Poor Model via Knowledge Infusion
Authors:
Cao Xiao,
Trong Nghia Hoang,
Shenda Hong,
Tengfei Ma,
Jimeng Sun
Abstract:
There is a growing interest in applying deep learning (DL) to healthcare, driven by the availability of data with multiple feature channels in rich-data environments (e.g., intensive care units). However, in many other practical situations, we can only access data with much fewer feature channels in a poor-data environments (e.g., at home), which often results in predictive models with poor perfor…
▽ More
There is a growing interest in applying deep learning (DL) to healthcare, driven by the availability of data with multiple feature channels in rich-data environments (e.g., intensive care units). However, in many other practical situations, we can only access data with much fewer feature channels in a poor-data environments (e.g., at home), which often results in predictive models with poor performance. How can we boost the performance of models learned from such poor-data environment by leveraging knowledge extracted from existing models trained using rich data in a related environment? To address this question, we develop a knowledge infusion framework named CHEER that can succinctly summarize such rich model into transferable representations, which can be incorporated into the poor model to improve its performance. The infused model is analyzed theoretically and evaluated empirically on several datasets. Our empirical results showed that CHEER outperformed baselines by 5.60% to 46.80% in terms of the macro-F1 score on multiple physiological datasets.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Evolution of Dust and Water Ice in Cometary Comae by Radiative Torques
Authors:
Thiem Hoang,
Ngo-Duy Tung
Abstract:
Comets provide unique information about the physical and chemical properties of the environment in which the Solar system was formed. Understanding how cometary dust and ice evolve under the effect of sunlight is essential for constraining nuclear structure and triggering mechanism of comet activity. In this paper, we first study rotational disruption of dust grains lifted by outgassing from comet…
▽ More
Comets provide unique information about the physical and chemical properties of the environment in which the Solar system was formed. Understanding how cometary dust and ice evolve under the effect of sunlight is essential for constraining nuclear structure and triggering mechanism of comet activity. In this paper, we first study rotational disruption of dust grains lifted by outgassing from comet nuclei by radiative torques (RATs). We find that composite grains could be rapidly disrupted into small fragments by the Radiative Torque Disruption (RATD) mechanism. We then study rotational desorption of ice grains by RATs and find that icy grains could be desorbed from large heliocentric distances, beyond the sublimation radius of water at $R_{\rm sub}(\H_{2}Ø)\sim 3\AU$. We also calculate the production rate of water vapor versus the heliocentric distance of comets due to rotational desorption. Our results could explain the variation of dust properties and the presence of small grains frequently observed from cometary comae. Finally, we suggest that the activity of distant comets could be triggered by rotational disruption of grains and desorption of water ice grains at large heliocentric distances.
△ Less
Submitted 16 August, 2020; v1 submitted 20 May, 2020;
originally announced May 2020.
-
DeepFake: Deep Dueling-based Deception Strategy to Defeat Reactive Jammers
Authors:
Nguyen Van Huynh,
Dinh Thai Hoang,
Diep N. Nguyen,
Eryk Dutkiewicz
Abstract:
In this paper, we introduce DeepFake, a novel deep reinforcement learning-based deception strategy to deal with reactive jamming attacks. In particular, for a smart and reactive jamming attack, the jammer is able to sense the channel and attack the channel if it detects communications from the legitimate transmitter. To deal with such attacks, we propose an intelligent deception strategy which all…
▽ More
In this paper, we introduce DeepFake, a novel deep reinforcement learning-based deception strategy to deal with reactive jamming attacks. In particular, for a smart and reactive jamming attack, the jammer is able to sense the channel and attack the channel if it detects communications from the legitimate transmitter. To deal with such attacks, we propose an intelligent deception strategy which allows the legitimate transmitter to transmit "fake" signals to attract the jammer. Then, if the jammer attacks the channel, the transmitter can leverage the strong jamming signals to transmit data by using ambient backscatter communication technology or harvest energy from the strong jamming signals for future use. By doing so, we can not only undermine the attack ability of the jammer, but also utilize jamming signals to improve the system performance. To effectively learn from and adapt to the dynamic and uncertainty of jamming attacks, we develop a novel deep reinforcement learning algorithm using the deep dueling neural network architecture to obtain the optimal policy with thousand times faster than those of the conventional reinforcement algorithms. Extensive simulation results reveal that our proposed DeepFake framework is superior to other anti-jamming strategies in terms of throughput, packet loss, and learning rate.
△ Less
Submitted 4 May, 2021; v1 submitted 12 May, 2020;
originally announced May 2020.
-
Robust Beamforming for IRS-assisted Wireless Communications under Channel Uncertainty
Authors:
Yongchang Deng,
Yuze Zou,
Shimin Gong,
Bin Lyu,
Dinh Thai Hoang,
Dusit Niyato
Abstract:
In this paper, we consider IRS-assisted transmissions from a multi-antenna access point (AP) to a receiver with uncertain channel information. By adjusting the magnitude of reflecting coefficients, the IRS can sustain its operations by harvesting energy from the AP's signal beamforming. Considering channel estimation errors, we model both the AP-IRS channel and the AP-IRS-receiver as a cascaded ch…
▽ More
In this paper, we consider IRS-assisted transmissions from a multi-antenna access point (AP) to a receiver with uncertain channel information. By adjusting the magnitude of reflecting coefficients, the IRS can sustain its operations by harvesting energy from the AP's signal beamforming. Considering channel estimation errors, we model both the AP-IRS channel and the AP-IRS-receiver as a cascaded channel by norm-based uncertainty sets. This allows us to formulate a robust optimization problem to minimize the AP's transmit power, subject to the user's worst-case data rate requirement and the IRS's worst-case power budget constraint. Instead of using the alternating optimization method, we firstly propose a heuristic scheme to decompose the IRS's {phase shift} optimization and the AP's active beamforming. Based on semidefinite relaxations of the worst-case constraints, we further devise an iterative algorithm to optimize the AP's transmit beamforming and the magnitude of the IRS's reflecting coefficients efficiently by solving a set of semidefinite programs. Simulation results reveal that the AP requires a higher transmit power to deal with the channel uncertainty. Moreover, the negative effect of channel uncertainty can be alleviated by using a larger-size IRS.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
A CNN-LSTM Quantifier for Single Access Point CSI Indoor Localization
Authors:
Minh Tu Hoang,
Brosnan Yuen,
Kai Ren,
Xiaodai Dong,
Tao Lu,
Robert Westendorp,
Kishore Reddy
Abstract:
This paper proposes a combined network structure between convolutional neural network (CNN) and long-short term memory (LSTM) quantifier for WiFi fingerprinting indoor localization. In contrast to conventional methods that utilize only spatial data with classification models, our CNN-LSTM network extracts both space and time features of the received channel state information (CSI) from a single ro…
▽ More
This paper proposes a combined network structure between convolutional neural network (CNN) and long-short term memory (LSTM) quantifier for WiFi fingerprinting indoor localization. In contrast to conventional methods that utilize only spatial data with classification models, our CNN-LSTM network extracts both space and time features of the received channel state information (CSI) from a single router. Furthermore, the proposed network builds a quantification model rather than a limited classification model as in most of the literature work, which enables the estimation of testing points that are not identical to the reference points. We analyze the instability of CSI and demonstrate a mitigation solution using a comprehensive filter and normalization scheme. The localization accuracy is investigated through extensive on-site experiments with several mobile devices including mobile phone (Nexus 5) and laptop (Intel 5300 NIC) on hundreds of testing locations. Using only a single WiFi router, our structure achieves an average localization error of 2.5~m with $\mathrm{80\%}$ of the errors under 4~m, which outperforms the other reported algorithms by approximately $\mathrm{50\%}$ under the same test environment.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Keen2Act: Activity Recommendation in Online Social Collaborative Platforms
Authors:
Roy Ka-Wei Lee,
Thong Hoang,
Richard J. Oentaryo,
David Lo
Abstract:
Social collaborative platforms such as GitHub and Stack Overflow have been increasingly used to improve work productivity via collaborative efforts. To improve user experiences in these platforms, it is desirable to have a recommender system that can suggest not only items (e.g., a GitHub repository) to a user, but also activities to be performed on the suggested items (e.g., forking a repository)…
▽ More
Social collaborative platforms such as GitHub and Stack Overflow have been increasingly used to improve work productivity via collaborative efforts. To improve user experiences in these platforms, it is desirable to have a recommender system that can suggest not only items (e.g., a GitHub repository) to a user, but also activities to be performed on the suggested items (e.g., forking a repository). To this end, we propose a new approach dubbed Keen2Act, which decomposes the recommendation problem into two stages: the Keen and Act steps. The Keen step identifies, for a given user, a (sub)set of items in which he/she is likely to be interested. The Act step then recommends to the user which activities to perform on the identified set of items. This decomposition provides a practical approach to tackling complex activity recommendation tasks while producing higher recommendation quality. We evaluate our proposed approach using two real-world datasets and obtain promising results whereby Keen2Act outperforms several baseline models.
△ Less
Submitted 10 May, 2020;
originally announced May 2020.
-
BlockRoam: Blockchain-based Roaming Management System for Future Mobile Networks
Authors:
Cong T. Nguyen,
Diep N. Nguyen,
Dinh Thai Hoang,
Hoang-Anh Pham,
Nguyen Huynh Tuong,
Yong Xiao,
Eryk Dutkiewicz
Abstract:
Mobile service providers (MSPs) are particularly vulnerable to roaming frauds, especially ones that exploit the long delay in the data exchange process of the contemporary roaming management systems, causing multi-billion dollars loss each year. In this paper, we introduce BlockRoam, a novel blockchain-based roaming management system that provides an efficient data exchange platform among MSPs and…
▽ More
Mobile service providers (MSPs) are particularly vulnerable to roaming frauds, especially ones that exploit the long delay in the data exchange process of the contemporary roaming management systems, causing multi-billion dollars loss each year. In this paper, we introduce BlockRoam, a novel blockchain-based roaming management system that provides an efficient data exchange platform among MSPs and mobile subscribers. Utilizing the Proof-of-Stake (PoS) consensus mechanism and smart contracts, BlockRoam can significantly shorten the information exchanging delay, thereby addressing the roaming fraud problems. Through intensive analysis, we show that the security and performance of such PoS-based blockchain network can be further enhanced by incentivizing more users (e.g., subscribers) to participate in the network. Moreover, users in such networks often join stake pools (e.g., formed by MSPs) to increase their profits. Therefore, we develop an economic model based on Stackelberg game to jointly maximize the profits of the network users and the stake pool, thereby encouraging user participation. We also propose an effective method to guarantee the uniqueness of this game's equilibrium. The performance evaluations show that the proposed economic model helps the MSPs to earn additional profits, attracts more investment to the blockchain network, and enhances the network's security and performance.
△ Less
Submitted 10 May, 2020;
originally announced May 2020.
-
Evolution of the dipole polarizability in the stable tin isotope chain
Authors:
S. Bassauer,
P. von Neumann-Cosel,
P. -G. Reinhard,
A. Tamii,
S. Adachi,
C. A. Bertulani,
P. Y. Chan,
G. Colò,
A. D'Alessio,
H. Fujioka,
H. Fujita,
Y. Fujita,
G. Gey,
M. Hilcker,
T. H. Hoang,
A. Inoue,
J. Isaak,
C. Iwamoto,
T. Klaus,
N. Kobayashi,
Y. Maeda,
M. Matsuda,
N. Nakatsuka,
S. Noji,
H. J. Ong
, et al. (14 additional authors not shown)
Abstract:
The dipole polarizability of stable even-mass tin isotopes 112,114,116,118,120,124 was extracted from inelastic proton scattering experiments at 295 MeV under very forward angles performed at RCNP. Predictions from energy density functionals cannot account for the present data and the polarizability of 208Pb simultaneously. The evolution of the polarizabilities in neighboring isotopes indicates a…
▽ More
The dipole polarizability of stable even-mass tin isotopes 112,114,116,118,120,124 was extracted from inelastic proton scattering experiments at 295 MeV under very forward angles performed at RCNP. Predictions from energy density functionals cannot account for the present data and the polarizability of 208Pb simultaneously. The evolution of the polarizabilities in neighboring isotopes indicates a kink at 120Sn while all model results show a nearly linear increase with mass number after inclusion of pairing corrections.
△ Less
Submitted 20 July, 2020; v1 submitted 8 May, 2020;
originally announced May 2020.
-
Enabling and Emerging Technologies for Social Distancing: A Comprehensive Survey and Open Problems
Authors:
Cong T. Nguyen,
Yuris Mulya Saputra,
Nguyen Van Huynh,
Ngoc-Tan Nguyen,
Tran Viet Khoa,
Bui Minh Tuan,
Diep N. Nguyen,
Dinh Thai Hoang,
Thang X. Vu,
Eryk Dutkiewicz,
Symeon Chatzinotas,
Bjorn Ottersten
Abstract:
Social distancing plays a pivotal role in preventing the spread of viral diseases illnesses such as COVID-19. By minimizing the close physical contact among people, we can reduce the chances of catching the virus and spreading it across the community. This paper aims to provide a comprehensive survey on how emerging technologies, e.g., wireless and networking, artificial intelligence (AI) can enab…
▽ More
Social distancing plays a pivotal role in preventing the spread of viral diseases illnesses such as COVID-19. By minimizing the close physical contact among people, we can reduce the chances of catching the virus and spreading it across the community. This paper aims to provide a comprehensive survey on how emerging technologies, e.g., wireless and networking, artificial intelligence (AI) can enable, encourage, and even enforce social distancing practice. To that end, we first provide a comprehensive background of social distancing including basic concepts, measurements, models, and propose various practical social distancing scenarios. We then discuss enabling wireless technologies which are especially effective and can be widely adopted in practice to keep distance, encourage, and enforce social distancing in general. After that, other emerging and related technologies such as machine learning, computer vision, thermal, ultrasound, etc., are introduced. These technologies open many new solutions and directions to deal with problems in social distancing, e.g., symptom prediction, detection and monitoring quarantined people, and contact tracing. Finally, we provide important open issues and challenges (e.g., privacy-preserving, scheduling, and incentive mechanisms) in implementing social distancing in practice. As an example, instead of reacting with ad-hoc responses to COVID-19-like pandemics in the future, smart infrastructures (e.g., next-generation wireless systems like 6G, smart home/building, smart city, intelligent transportation systems) should incorporate a pandemic mode in its standard architecture/design.
△ Less
Submitted 22 September, 2020; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Can Planet Nine Be Detected Gravitationally by a Sub-Relativistic Spacecraft?
Authors:
Thiem Hoang,
Abraham Loeb
Abstract:
Planet 9 was proposed as an explanation for the clustering of orbits for some trans-Neuptunian objects. Recently, the use of a sub-relativistic spacecraft was proposed to indirectly probe Planet 9's gravitational influence. Here we study the effects of the drag and electromagnetic forces exerted on a sub-relativistic spacecraft by the interstellar medium (ISM) and compare these forces with the gra…
▽ More
Planet 9 was proposed as an explanation for the clustering of orbits for some trans-Neuptunian objects. Recently, the use of a sub-relativistic spacecraft was proposed to indirectly probe Planet 9's gravitational influence. Here we study the effects of the drag and electromagnetic forces exerted on a sub-relativistic spacecraft by the interstellar medium (ISM) and compare these forces with the gravitational force induced by Planet 9. We find that the resulting noise due to density and magnetic fluctuations would dominate over Planet 9's gravitational signal at sub-relativistic speeds, $v\gtrsim 0.001~c$. We then identify the parameter space required to overcome the drag and magnetic noise from the ISM turbulence and enable the detection of Planet 9's gravity. Finally, we discuss practical strategies to mitigate the effect of the drag and electromagnetic forces.
△ Less
Submitted 14 May, 2020; v1 submitted 3 May, 2020;
originally announced May 2020.
-
Optimal Beam Association for High Mobility mmWave Vehicular Networks: Lightweight Parallel Reinforcement Learning Approach
Authors:
Nguyen Van Huynh,
Diep N. Nguyen,
Dinh Thai Hoang,
Eryk Dutkiewicz
Abstract:
In intelligent transportation systems (ITS), vehicles are expected to feature with advanced applications and services which demand ultra-high data rates and low-latency communications. For that, the millimeter wave (mmWave) communication has been emerging as a very promising solution. However, incorporating the mmWave into ITS is particularly challenging due to the high mobility of vehicles and th…
▽ More
In intelligent transportation systems (ITS), vehicles are expected to feature with advanced applications and services which demand ultra-high data rates and low-latency communications. For that, the millimeter wave (mmWave) communication has been emerging as a very promising solution. However, incorporating the mmWave into ITS is particularly challenging due to the high mobility of vehicles and the inherent sensitivity of mmWave beams to dynamic blockages. This article addresses these problems by develo** an optimal beam association framework for mmWave vehicular networks under high mobility. Specifically, we use the semi-Markov decision process to capture the dynamics and uncertainty of the environment. The Q-learning algorithm is then often used to find the optimal policy. However, Q-learning is notorious for its slow-convergence. Instead of adopting deep reinforcement learning structures (like most works in the literature), we leverage the fact that there are usually multiple vehicles on the road to speed up the learning process. To that end, we develop a lightweight yet very effective parallel Q-learning algorithm to quickly obtain the optimal policy by simultaneously learning from various vehicles. Extensive simulations demonstrate that our proposed solution can increase the data rate by 47% and reduce the disconnection probability by 29% compared to other solutions.
△ Less
Submitted 7 June, 2021; v1 submitted 2 May, 2020;
originally announced May 2020.
-
Effect of Dust Rotational Disruption by Radiative Torques and Implications for F-corona decrease revealed by the Parker Solar Probe
Authors:
Thiem Hoang,
Alex Lazarian,
Hyeseung Lee,
Kyungsuk Cho,
Pin-Gao Gu,
Chi-Hang Ng
Abstract:
The first-year results from the Parker Solar Probe (PSP) reveal a gradual decrease of F-coronal dust from distances of $D=0.166-0.336$ AU (or the inner elongations of $\sim 9.22- 18.69~R_{\odot}$) to the Sun (Howard et al. 2019). Such a F-corona decrease cannot be explained by the dust sublimation scenario of the popular silicate composition that implies a dust-free-zone of boundary at heliocentri…
▽ More
The first-year results from the Parker Solar Probe (PSP) reveal a gradual decrease of F-coronal dust from distances of $D=0.166-0.336$ AU (or the inner elongations of $\sim 9.22- 18.69~R_{\odot}$) to the Sun (Howard et al. 2019). Such a F-corona decrease cannot be explained by the dust sublimation scenario of the popular silicate composition that implies a dust-free-zone of boundary at heliocentric radius $R\lesssim 4-5R_{\odot}$, but may be explained by appealing to various dust compositions with different sublimation fronts. In this paper, we present an additional explanation for the F-corona decrease using our newly introduced mechanism of dust destruction so-called Radiative Torque Disruption (RATD) mechanism. We demonstrate that RATD rapidly breaks large grains into nanoparticles so that they can be efficiently destroyed by nonthermal sputtering induced by bombardment of energetic protons from slow solar winds, which extends the dust-free-zone established by thermal sublimation to $R_{dfz}\sim 8R_{\odot}$. Beyond this extended dust-free-zone, we find that the dust mass decreases gradually from $R\sim 42R_{\odot}$ toward the Sun due to partial removal of nanodust by nonthermal sputtering. The joint effect of RATD and nonthermal sputtering can successfully reproduce the gradual decrease of the F-corona between $19-9R_{\odot}$ observed by the PSP. Finally, the RATD mechanism can efficiently produce nanoparticles usually observed in the inner solar system.
△ Less
Submitted 6 July, 2021; v1 submitted 13 April, 2020;
originally announced April 2020.
-
Optimized Energy and Information Relaying in Self-Sustainable IRS-Empowered WPCN
Authors:
Bin Lyu,
Parisa Ramezani,
Dinh Thai Hoang,
Shimin Gong,
Zhen Yang,
Abbas Jamalipour
Abstract:
This paper proposes a hybrid-relaying scheme empowered by a self-sustainable intelligent reflecting surface (IRS) in a wireless powered communication network (WPCN), to simultaneously improve the performance of downlink energy transfer (ET) from a hybrid access point (HAP) to multiple users and uplink information transmission (IT) from users to the HAP. We propose time-switching (TS) and power-spl…
▽ More
This paper proposes a hybrid-relaying scheme empowered by a self-sustainable intelligent reflecting surface (IRS) in a wireless powered communication network (WPCN), to simultaneously improve the performance of downlink energy transfer (ET) from a hybrid access point (HAP) to multiple users and uplink information transmission (IT) from users to the HAP. We propose time-switching (TS) and power-splitting (PS) schemes for the IRS, where the IRS can harvest energy from the HAP's signals by switching between energy harvesting and signal reflection in the TS scheme or adjusting its reflection amplitude in the PS scheme. For both the TS and PS schemes, we formulate the sum-rate maximization problems by jointly optimizing the IRS's phase shifts for both ET and IT and network resource allocation. To address each problem's non-convexity, we propose a two-step algorithm to obtain the near-optimal solution with high accuracy. To show the structure of resource allocation, we also investigate the optimal solutions for the schemes with random phase shifts. Through numerical results, we show that our proposed schemes can achieve significant system sum-rate gain compared to the baseline scheme without IRS.
△ Less
Submitted 30 September, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Federated Learning Meets Contract Theory: Energy-Efficient Framework for Electric Vehicle Networks
Authors:
Yuris Mulya Saputra,
Diep N. Nguyen,
Dinh Thai Hoang,
Thang Xuan Vu,
Eryk Dutkiewicz,
Symeon Chatzinotas
Abstract:
In this paper, we propose a novel energy-efficient framework for an electric vehicle (EV) network using a contract theoretic-based economic model to maximize the profits of charging stations (CSs) and improve the social welfare of the network. Specifically, we first introduce CS-based and CS clustering-based decentralized federated energy learning (DFEL) approaches which enable the CSs to train th…
▽ More
In this paper, we propose a novel energy-efficient framework for an electric vehicle (EV) network using a contract theoretic-based economic model to maximize the profits of charging stations (CSs) and improve the social welfare of the network. Specifically, we first introduce CS-based and CS clustering-based decentralized federated energy learning (DFEL) approaches which enable the CSs to train their own energy transactions locally to predict energy demands. In this way, each CS can exchange its learned model with other CSs to improve prediction accuracy without revealing actual datasets and reduce communication overhead among the CSs. Based on the energy demand prediction, we then design a multi-principal one-agent (MPOA) contract-based method. In particular, we formulate the CSs' utility maximization as a non-collaborative energy contract problem in which each CS maximizes its utility under common constraints from the smart grid provider (SGP) and other CSs' contracts. Then, we prove the existence of an equilibrium contract solution for all the CSs and develop an iterative algorithm at the SGP to find the equilibrium. Through simulation results using the dataset of CSs' transactions in Dundee city, the United Kingdom between 2017 and 2018, we demonstrate that our proposed method can achieve the energy demand prediction accuracy improvement up to 24.63% and lessen communication overhead by 96.3% compared with other machine learning algorithms. Furthermore, our proposed method can outperform non-contract-based economic models by 35% and 36% in terms of the CSs' utilities and social welfare of the network, respectively.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Reexamination of $^{6}$Li scattering as a Probe to Investigate the Isoscalar Giant Resonances in Nuclei
Authors:
J. C. Zamora,
C. Sullivan,
R. G. T. Zegers,
N. Aoi,
L. Batail,
D. Bazin,
M. Carpenter,
J. J. Carroll,
I. Deloncle,
Y. D. Fang,
H. Fujita,
U. Garg,
G. Gey,
C. J. Guess,
M. N. Harakeh,
T. H. Hoang,
E. Hudson,
N. Ichige,
E. Ideguchi,
A. Inoue,
J. Isaak,
C. Iwamoto,
C. Kacir,
N. Kobayashi,
T. Koike
, et al. (15 additional authors not shown)
Abstract:
Inelastic ${}^{6}$Li scattering at 100 MeV/u on ${}^{12}$C and ${}^{93}$Nb have been measured with the high-resolution magnetic spectrometer Grand Raiden. The magnetic-rigidity settings of the spectrometer covered excitation energies from 10 to 40 MeV and scattering angles in the range $0^\circ < θ_{\text{lab.}}< 2^\circ$. The isoscalar giant monopole resonance was selectively excited in the prese…
▽ More
Inelastic ${}^{6}$Li scattering at 100 MeV/u on ${}^{12}$C and ${}^{93}$Nb have been measured with the high-resolution magnetic spectrometer Grand Raiden. The magnetic-rigidity settings of the spectrometer covered excitation energies from 10 to 40 MeV and scattering angles in the range $0^\circ < θ_{\text{lab.}}< 2^\circ$. The isoscalar giant monopole resonance was selectively excited in the present data. Measurements free of instrumental background and the very favorable resonance-to-continuum ratio of ${}^{6}$Li scattering allowed for precise determination of the $E0$ strengths in ${}^{12}$C and ${}^{93}$Nb. It was found that the monopole strength in ${}^{12}$C exhausts $52 \pm 3^\text{(stat.)} \pm 8 ^\text{(sys.)}$\% of the energy-weighted sum rule (EWSR), which is considerably higher than results from previous $α$-scattering experiments. The monopole strength in ${}^{93}$Nb exhausts $92 \pm 4^\text{(stat.)} \pm 10 ^\text{(sys.)}$\% of the EWSR, and it is consistent with measurements of nuclei with mass number of $A\approx90$. Such comparison indicates that the isoscalar giant monopole resonance distributions in these nuclei are very similar, and no influence due to nuclear structure was observed.
△ Less
Submitted 27 March, 2020;
originally announced March 2020.
-
Effects of rotational disruption on the evolution of grain size distribution in galaxies
Authors:
Hiroyuki Hirashita,
Thiem Hoang
Abstract:
Interstellar dust grains can be spun up by radiative torques, and the resulting centrifugal force may be strong enough to disrupt large dust grains. We examine the effect of this rotational disruption on the evolution of grain size distribution in galaxies. To this goal, we modify our previous model by assuming that rotational disruption is the major small-grain production mechanism. We find that…
▽ More
Interstellar dust grains can be spun up by radiative torques, and the resulting centrifugal force may be strong enough to disrupt large dust grains. We examine the effect of this rotational disruption on the evolution of grain size distribution in galaxies. To this goal, we modify our previous model by assuming that rotational disruption is the major small-grain production mechanism. We find that rotational disruption can have a large influence on the evolution of grain size distribution in the following two aspects especially for composites and grain mantles (with tensile strength $\sim 10^7$ erg cm$^{-3}$). First, because of the short time-scale of rotational disruption, the small-grain production occurs even in the early phase of galaxy evolution. Therefore, even though stars produce large grains, the abundance of small grains can be large enough to steepen the extinction curve. Secondly, rotational disruption is important in determining the maximum grain radius, which regulates the steepness of the extinction curve. For compact grains with tensile strength $\gtrsim 10^9$ erg cm$^{-3}$, the size evolution is significantly affected by rotational disruption only if the radiation field is as strong as (or the dust temperature is as high as) expected for starburst galaxies. For compact grains, rotational disruption predicts that the maximum grain radius becomes less than 0.2 $μ$m for galaxies with a dust temperature $\gtrsim 50$ K.
△ Less
Submitted 18 March, 2020;
originally announced March 2020.
-
CC2Vec: Distributed Representations of Code Changes
Authors:
Thong Hoang,
Hong ** Kang,
Julia Lawall,
David Lo
Abstract:
Existing work on software patches often use features specific to a single task. These works often rely on manually identified features, and human effort is required to identify these features for each task. In this work, we propose CC2Vec, a neural network model that learns a representation of code changes guided by their accompanying log messages, which represent the semantic intent of the code c…
▽ More
Existing work on software patches often use features specific to a single task. These works often rely on manually identified features, and human effort is required to identify these features for each task. In this work, we propose CC2Vec, a neural network model that learns a representation of code changes guided by their accompanying log messages, which represent the semantic intent of the code changes. CC2Vec models the hierarchical structure of a code change with the help of the attention mechanism and uses multiple comparison functions to identify the differences between the removed and added code.
To evaluate if CC2Vec can produce a distributed representation of code changes that is general and useful for multiple tasks on software patches, we use the vectors produced by CC2Vec for three tasks: log message generation, bug fixing patch identification, and just-in-time defect prediction. In all tasks, the models using CC2Vec outperform the state-of-the-art techniques.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Physical Layer Security: Detection of Active Eavesdrop** Attacks by Support Vector Machines
Authors:
Tiep M. Hoang,
Trung Q. Duong,
Hoang Duong Tuan,
Sangarapillai Lambotharan,
Emi Garcia-Palacios,
Long D. Nguyen
Abstract:
This paper presents a framework for converting wireless signals into structured datasets, which can be fed into machine learning algorithms for the detection of active eavesdrop** attacks at the physical layer. More specifically, a wireless communication system, which consists of K legal users, one access point (AP) and one active eavesdropper, is considered. To cope with the eavesdropper who br…
▽ More
This paper presents a framework for converting wireless signals into structured datasets, which can be fed into machine learning algorithms for the detection of active eavesdrop** attacks at the physical layer. More specifically, a wireless communication system, which consists of K legal users, one access point (AP) and one active eavesdropper, is considered. To cope with the eavesdropper who breaks into the system during the uplink phase, we first build structured datasets based on several different features. We then apply support vector machine (SVM) classifiers and one-class SVM classifiers to those structured datasets for detecting the presence of eavesdropper. Regarding the data, we first process received signals at the AP and then define three different features (i.e., MEAN, RATIO and SUM) based on the post-processing signals. Noticeably, our three defined features are formulated such that they have relevant statistical properties. Enabling the AP to simulate the entire process of transmission, we form the so-called artificial training data (ATD) that is used for training SVM (or one-class SVM) models. While SVM is preferred in the case of having perfect channel state information (CSI) of all channels, one-class SVM is preferred in the case of having only the CSI of legal users. We also evaluate the accuracy of the trained models in relation to the choice of kernel functions, the choice of features, and the change of eavesdropper's power. Numerical results show that the accuracy is relatively sensitive to adjusting parameters. Under some settings, SVM classifiers (or even one-class SVM) can bring about the accuracy of over 90%.
△ Less
Submitted 23 February, 2021; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Hilbert-Poincaré series of parity binomial edge ideals and permanental ideals of complete graph
Authors:
Do Trong Hoang,
Thomas Kahle
Abstract:
We give an explicit formula for the Hilbert-Poincaré series of the parity binomial edge ideal of a complete graph $K_{n}$ or equivalently for the ideal generated by all $2\times 2$-permanents of a $2\times n$-matrix. It follows that the depth and Castelnuovo-Mumford regularity of these ideals are independent of $n$.
We give an explicit formula for the Hilbert-Poincaré series of the parity binomial edge ideal of a complete graph $K_{n}$ or equivalently for the ideal generated by all $2\times 2$-permanents of a $2\times n$-matrix. It follows that the depth and Castelnuovo-Mumford regularity of these ideals are independent of $n$.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Plasmonic random laser on an optical fiber tip
Authors:
Dipendra S. Khatri,
Ying Li,
Jiyang Chen,
Anna Elizabeth Stocks,
Elyahb Allie Kwizera,
Xiaohua Huang,
Christos Argyropoulos,
Thang Hoang
Abstract:
Random lasing occurs as the result of a coherent optical feedback from multiple scattering centers. Here, we demonstrate that plasmonic gold nanostars are efficient light scattering centers, exhibiting strong field enhancement at their nanotips, which assists a very narrow bandwidth and highly amplified coherent random lasing with a low lasing threshold. First, by embedding plasmonic gold nanostar…
▽ More
Random lasing occurs as the result of a coherent optical feedback from multiple scattering centers. Here, we demonstrate that plasmonic gold nanostars are efficient light scattering centers, exhibiting strong field enhancement at their nanotips, which assists a very narrow bandwidth and highly amplified coherent random lasing with a low lasing threshold. First, by embedding plasmonic gold nanostars in a rhodamine 6G dye gain medium, we observe a series of very narrow random lasing peaks with full-width at half-maximum ~ 0.8 nm. In contrast, free rhodamine 6G dye molecules exhibit only a single amplified spontaneous emission peak with a broader linewidth of 6 nm. The lasing threshold for the dye with gold nanostars is two times lower than that for a free dye. Furthermore, by coating the tip of a single-mode optical fiber with gold nanostars, we demonstrate a collection of random lasing signal through the fiber that can be easily guided and analyzed. Time-resolved measurements show a significant increase in the emission rate above the lasing threshold, indicating a stimulated emission process. Our study provides a method for generating random lasing in the nanoscale with low threshold values that can be easily collected and guided, which promise a range of potential applications in remote sensing, information processing, and on-chip coherent light sources.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Optimal Pricing of Internet of Things: A Machine Learning Approach
Authors:
Mohammad Abu Alsheikh,
Dinh Thai Hoang,
Dusit Niyato,
Derek Leong,
** Wang,
Zhu Han
Abstract:
Internet of things (IoT) produces massive data from devices embedded with sensors. The IoT data allows creating profitable services using machine learning. However, previous research does not address the problem of optimal pricing and bundling of machine learning-based IoT services. In this paper, we define the data value and service quality from a machine learning perspective. We present an IoT m…
▽ More
Internet of things (IoT) produces massive data from devices embedded with sensors. The IoT data allows creating profitable services using machine learning. However, previous research does not address the problem of optimal pricing and bundling of machine learning-based IoT services. In this paper, we define the data value and service quality from a machine learning perspective. We present an IoT market model which consists of data vendors selling data to service providers, and service providers offering IoT services to customers. Then, we introduce optimal pricing schemes for the standalone and bundled selling of IoT services. In standalone service sales, the service provider optimizes the size of bought data and service subscription fee to maximize its profit. For service bundles, the subscription fee and data sizes of the grouped IoT services are optimized to maximize the total profit of cooperative service providers. We show that bundling IoT services maximizes the profit of service providers compared to the standalone selling. For profit sharing of bundled services, we apply the concepts of core and Shapley solutions from cooperative game theory as efficient and fair allocations of payoffs among the cooperative service providers in the bundling coalition.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Rotational Disruption of Dust and Ice by Radiative Torques in Protoplanetary Disks and Implications for Observations
Authors:
Ngo-Duy Tung,
Thiem Hoang
Abstract:
Dust and ice mantles on dust grains play an important role in various processes in protoplanetary disks (PPDs) around a young star, including planetesimal formation, surface chemistry, and being the reservoir of water in habitable zones. In this paper, we will perform two-dimensional modeling of rotational disruption of dust grains and ice mantles due to centrifugal force within suprathermally rot…
▽ More
Dust and ice mantles on dust grains play an important role in various processes in protoplanetary disks (PPDs) around a young star, including planetesimal formation, surface chemistry, and being the reservoir of water in habitable zones. In this paper, we will perform two-dimensional modeling of rotational disruption of dust grains and ice mantles due to centrifugal force within suprathermally rotating grains spun-up by radiative torques for disks around T-Tauri and Herbig Ae/Be stars. We first study rotational disruption of large composite grains and find that large aggregates could be disrupted into individual nanoparticles via the RAdiative Torque Disruption (RATD) mechanism. We then study rotational desorption of ice mantles and ro-thermal desorption of molecules from the ice mantle. We will show that ice mantles in the warm surface layer and above of the disk can be disrupted into small icy fragments, followed by rapid evaporation of molecules. We suggest that the rotational disruption mechanism can replenish the ubiquitous presence of polycyclic aromatic hydrogen (PAHs)/ nanoparticles in the hot surface layers of PPDs as observed in mid-IR emission, which are presumably destroyed by extreme ultraviolet (UV) stellar photons. We show that the water snowline is more extended in the presence of rotational desorption, which would decrease the number of comets but increase the number of asteroids formed in the solar nebula. Finally, we suggest that the more efficient breakup of carbonaceous grains than silicates by RATD might resolve the carbon deficit problem measured on the Earth and rocky bodies.
△ Less
Submitted 6 August, 2020; v1 submitted 9 February, 2020;
originally announced February 2020.
-
QUBIC: the Q & U Bolometric Interferometer for Cosmology
Authors:
E. S. Battistelli,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi,
D. Auguste,
J. Aumont,
S. Azzoni,
S. Banfi,
P. Battaglia,
A. Baù,
B. Bèlier,
D. Bennett,
L. Bergè,
J. -Ph. Bernard,
M. Bersanelli,
M. -A. Bigot-Sazy,
N. Bleurvacq,
J. Bonaparte,
J. Bonis,
A. Bottani,
E. Bunn,
D. Burke,
D. Buzi
, et al. (114 additional authors not shown)
Abstract:
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr…
▽ More
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Capitalizing Backscatter-Aided Hybrid Relay Communications with Wireless Energy Harvesting
Authors:
Shimin Gong,
Yuze Zou,
Dinh Thai Hoang,
**g Xu,
Wenqing Cheng,
Dusit Niyato
Abstract:
In this work, we employ multiple energy harvesting relays to assist information transmission from a multi-antenna hybrid access point (HAP) to a receiver. All the relays are wirelessly powered by the HAP in the power-splitting (PS) protocol. We introduce the novel concept of hybrid relay communications, which allows each relay to switch between two radio modes, i.e., the active RF communications a…
▽ More
In this work, we employ multiple energy harvesting relays to assist information transmission from a multi-antenna hybrid access point (HAP) to a receiver. All the relays are wirelessly powered by the HAP in the power-splitting (PS) protocol. We introduce the novel concept of hybrid relay communications, which allows each relay to switch between two radio modes, i.e., the active RF communications and the passive backscatter communications, according to its channel and energy conditions. We envision that the complement transmissions in two radio modes can be exploited to improve the overall relay performance. As such, we aim to jointly optimize the HAP's beamforming, individual relays' radio mode, the PS ratio, and the relays' collaborative beamforming to enhance the throughput performance at the receiver. The resulting formulation becomes a combinatorial and non-convex problem. Thus, we firstly propose a convex approximation to the original problem, which serves as a lower bound of the relay performance. Then, we design an iterative algorithm that decomposes the binary relay mode optimization from the other operating parameters. In the inner loop of the algorithm, we exploit the structural properties to optimize the relay performance with the fixed relay mode in the alternating optimization framework. In the outer loop, different performance metrics are derived to guide the search for a set of passive relays to further improve the relay performance. Simulation results verify that the hybrid relaying communications can achieve 20% performance improvement compared to the conventional relay communications with all active relays.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Challenges and Countermeasures for Adversarial Attacks on Deep Reinforcement Learning
Authors:
Inaam Ilahi,
Muhammad Usama,
Junaid Qadir,
Muhammad Umar Janjua,
Ala Al-Fuqaha,
Dinh Thai Hoang,
Dusit Niyato
Abstract:
Deep Reinforcement Learning (DRL) has numerous applications in the real world thanks to its outstanding ability in quickly adapting to the surrounding environments. Despite its great advantages, DRL is susceptible to adversarial attacks, which precludes its use in real-life critical systems and applications (e.g., smart grids, traffic controls, and autonomous vehicles) unless its vulnerabilities a…
▽ More
Deep Reinforcement Learning (DRL) has numerous applications in the real world thanks to its outstanding ability in quickly adapting to the surrounding environments. Despite its great advantages, DRL is susceptible to adversarial attacks, which precludes its use in real-life critical systems and applications (e.g., smart grids, traffic controls, and autonomous vehicles) unless its vulnerabilities are addressed and mitigated. Thus, this paper provides a comprehensive survey that discusses emerging attacks in DRL-based systems and the potential countermeasures to defend against these attacks. We first cover some fundamental backgrounds about DRL and present emerging adversarial attacks on machine learning techniques. We then investigate more details of the vulnerabilities that the adversary can exploit to attack DRL along with the state-of-the-art countermeasures to prevent such attacks. Finally, we highlight open issues and research challenges for develo** solutions to deal with attacks for DRL-based intelligent systems.
△ Less
Submitted 8 September, 2021; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Semi-Sequential Probabilistic Model For Indoor Localization Enhancement
Authors:
Minh Tu Hoang,
Brosnan Yuen,
Xiaodai Dong,
Tao Lu,
Robert Westendorp,
Kishore Reddy
Abstract:
This paper proposes a semi-sequential probabilistic model (SSP) that applies an additional short term memory to enhance the performance of the probabilistic indoor localization. The conventional probabilistic methods normally treat the locations in the database indiscriminately. In contrast, SSP leverages the information of the previous position to determine the probable location since the user's…
▽ More
This paper proposes a semi-sequential probabilistic model (SSP) that applies an additional short term memory to enhance the performance of the probabilistic indoor localization. The conventional probabilistic methods normally treat the locations in the database indiscriminately. In contrast, SSP leverages the information of the previous position to determine the probable location since the user's speed in an indoor environment is bounded and locations near the previous one have higher probability than the other locations. Although the SSP utilizes the previous location information, it does not require the exact moving speed and direction of the user. On-site experiments using the received signal strength indicator (RSSI) and channel state information (CSI) fingerprints for localization demonstrate that SSP reduces the maximum error and boosts the performance of existing probabilistic approaches by 25% - 30%.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
IRS-based Wireless Jamming Attacks: When Jammers can Attack without Power
Authors:
Bin Lyu,
Dinh Thai Hoang,
Shimin Gong,
Dusit Niyato,
Dong In Kim
Abstract:
This paper proposes to use Intelligent Reflecting Surface (IRS) as a green jammer to attack a legitimate communication without using any internal energy to generate jamming signals. In particular, the IRS is used to intelligently reflect the signals from the legitimate transmitter to the legitimate receiver (LR) to guarantee that the received signals from direct and reflecting links can be added d…
▽ More
This paper proposes to use Intelligent Reflecting Surface (IRS) as a green jammer to attack a legitimate communication without using any internal energy to generate jamming signals. In particular, the IRS is used to intelligently reflect the signals from the legitimate transmitter to the legitimate receiver (LR) to guarantee that the received signals from direct and reflecting links can be added destructively, which thus diminishes the Signal-to-Interference-plus-Noise Ratio (SINR) at the LR. To minimize the received signal power at the LR, we consider the joint optimization of magnitudes of reflection coefficients and discrete phase shifts at the IRS. Based on the block coordinate descent, semidefinite relaxation, and Gaussian randomization techniques, the solution can be obtained efficiently. Through simulation results, we show that by using the IRS-based jammer, we can reduce the signal power received at the LR by up to 99\%. Interestingly, the performance of the proposed IRS-based jammer is even better than that of the conventional active jamming attacks in some scenarios.
△ Less
Submitted 29 May, 2020; v1 submitted 6 January, 2020;
originally announced January 2020.
-
Modelling the strongest silicate emission features of local type 1 AGN
Authors:
M. Martínez-Paredes,
O. González-Martín,
D. Esparza-Arredondo,
M. Kim,
A. Alonso-Herrero,
Y. Krongold,
T. Hoang,
C. Ramos Almeida,
I. Aretxaga,
D. Dultzin,
J. Hodgson
Abstract:
We measure the 10 and $18μ$m silicate features in a sample of 67 local ($z<0.1$) type 1 active galactic nuclei (AGN) with available {\it Spitzer} spectra dominated by non-stellar processes. We find that the $10μ$m silicate feature peaks at $10.3^{+0.7}_{-0.9}μ$m with a strength (Si$_{p}$ = ln f$_{p}$(spectrum)/f$_{p}$(continuum)) of $0.11^{+0.15}_{-0.36}$, while the $18μ$m one peaks at…
▽ More
We measure the 10 and $18μ$m silicate features in a sample of 67 local ($z<0.1$) type 1 active galactic nuclei (AGN) with available {\it Spitzer} spectra dominated by non-stellar processes. We find that the $10μ$m silicate feature peaks at $10.3^{+0.7}_{-0.9}μ$m with a strength (Si$_{p}$ = ln f$_{p}$(spectrum)/f$_{p}$(continuum)) of $0.11^{+0.15}_{-0.36}$, while the $18μ$m one peaks at $17.3^{+0.4}_{-0.7}μ$m with a strength of $0.14^{+0.06}_{-0.06}$. We select from this sample sources with the strongest 10$μ$m silicate strength ($σ_{Si_{10μm}}>0.28$, 10 objects). We carry out a detailed modeling of the IRS/{\it Spitzer} spectra by comparing several models that assume different geometries and dust composition: a smooth torus model, two clumpy torus models, a two-phase medium torus model, and a disk+outflow clumpy model. We find that the silicate features are well modeled by the clumpy model of Nenkova et al. 2008, and among all models those including outflows and complex dust composition are the best (Hoenig et al. 2017). We note that even in AGN-dominated galaxies it is usually necessary to add stellar contributions to reproduce the emission at the shortest wavelengths.
△ Less
Submitted 3 January, 2020;
originally announced January 2020.
-
"Borrowing Arrows with Thatched Boats": The Art of Defeating Reactive Jammers in IoT Networks
Authors:
Dinh Thai Hoang,
Diep N. Nguyen,
Mohammad Abu Alsheikh,
Shimin Gong,
Eryk Dutkiewicz,
Dusit Niyato,
Zhu Han
Abstract:
In this article, we introduce a novel deception strategy which is inspired by the "Borrowing Arrows with Thatched Boats", one of the most famous military tactics in the history, in order to defeat reactive jamming attacks for low-power IoT networks. Our proposed strategy allows resource-constrained IoT devices to be able to defeat powerful reactive jammers by leveraging their own jamming signals.…
▽ More
In this article, we introduce a novel deception strategy which is inspired by the "Borrowing Arrows with Thatched Boats", one of the most famous military tactics in the history, in order to defeat reactive jamming attacks for low-power IoT networks. Our proposed strategy allows resource-constrained IoT devices to be able to defeat powerful reactive jammers by leveraging their own jamming signals. More specifically, by stimulating the jammer to attack the channel through transmitting fake transmissions, the IoT system can not only undermine the jammer's power, but also harvest energy or utilize jamming signals as a communication means to transmit data through using RF energy harvesting and ambient backscatter techniques, respectively. Furthermore, we develop a low-cost deep reinforcement learning framework that enables the hardware-constrained IoT device to quickly obtain an optimal defense policy without requiring any information about the jammer in advance. Simulation results reveal that our proposed framework can not only be very effective in defeating reactive jamming attacks, but also leverage jammer's power to enhance system performance for the IoT network.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
Towards Smart Wireless Communications via Intelligent Reflecting Surfaces: A Contemporary Survey
Authors:
Shimin Gong,
Xiao Lu,
Dinh Thai Hoang,
Dusit Niyato,
Lei Shu,
Dong In Kim,
Ying-Chang Liang
Abstract:
This paper presents a literature review on recent applications and design aspects of the intelligent reflecting surface (IRS) in the future wireless networks. Conventionally, the network optimization has been limited to transmission control at two endpoints, i.e., end users and network controller. The fading wireless channel is uncontrollable and becomes one of the main limiting factors for perfor…
▽ More
This paper presents a literature review on recent applications and design aspects of the intelligent reflecting surface (IRS) in the future wireless networks. Conventionally, the network optimization has been limited to transmission control at two endpoints, i.e., end users and network controller. The fading wireless channel is uncontrollable and becomes one of the main limiting factors for performance improvement. The IRS is composed of a large array of scattering elements, which can be individually configured to generate additional phase shifts to the signal reflections. Hence, it can actively control the signal propagation properties in favor of signal reception, and thus realize the notion of a smart radio environment. As such, the IRS's phase control, combined with the conventional transmission control, can potentially bring performance gain compared to wireless networks without IRS. In this survey, we first introduce basic concepts of the IRS and the realizations of its reconfigurability. Then, we focus on applications of the IRS in wireless communications. We overview different performance metrics and analytical approaches to characterize the performance improvement of IRS-assisted wireless networks. To exploit the performance gain, we discuss the joint optimization of the IRS's phase control and the transceivers' transmission control in different network design problems, e.g.,~rate maximization and power minimization problems. Furthermore, we extend the discussion of IRS-assisted wireless networks to some emerging use cases. Finally, we highlight important practical challenges and future research directions for realizing IRS-assisted wireless networks in beyond 5G communications.
△ Less
Submitted 19 May, 2020; v1 submitted 16 December, 2019;
originally announced December 2019.
-
Gamma-ray Burst Afterglows: Time-Varying Extinction, Polarization, and Colors due to Rotational Disruption of Dust Grains
Authors:
Thiem Hoang,
Nguyen Chau Giang,
Le Ngoc Tram
Abstract:
Prompt optical emission of gamma-ray bursts (GRBs) is known to have important effects on the surrounding environment. In this paper, we study rotational disruption and alignment of dust grains by radiative torques (RATs) induced by GRB afterglows and predict their signatures on the observational properties of GRB afterglows. We first study grain disruption using RAdiative Torque Disruption (RATD)…
▽ More
Prompt optical emission of gamma-ray bursts (GRBs) is known to have important effects on the surrounding environment. In this paper, we study rotational disruption and alignment of dust grains by radiative torques (RATs) induced by GRB afterglows and predict their signatures on the observational properties of GRB afterglows. We first study grain disruption using RAdiative Torque Disruption (RATD) mechanism and find that large grains (size $>0.1 μ\rm m$) within a distance of $d< 40$ pc from the source can be disrupted into smaller grains. We then model the extinction curve of GRB afterglows and find that optical-NIR extinction is rapidly decreased, and UV extinction increases due to the conversion of large grains into smaller ones via RATD. The total-to-selective visual extinction ratio is found to decrease from the standard value of $R_{V}\sim 3.1$ to $\sim 1.5$ after disruption time $t_{\rm disr} \lesssim 10^{4}$ s. Next, we study grain alignment by RATs induced by GRB afterglows and model the wavelength-dependence polarization produced by grains aligned with magnetic fields. We find that polarization degree first increases due to enhanced alignment of small grains and then decreases when grain disruption by RATD begins. The maximum polarization wavelength $ λ_{\rm max}$ decreases rapidly from the standard value of $\sim 0.55 μ\rm m$ to $\sim 0.15 μ\rm m$ over alignment time of $t_{\rm align} \lesssim 30$ s due to enhanced alignment of small grains. Finally, we found that RATD induces a significant decrease in optical/NIR extinction, producing an optical re-brightening in the observed light curve of GRB afterglows. We show that our theoretical predictions can explain various observational properties of GRB afterglows, including steep extinction curves, time-variability of colors, and optical re-brightening of GRB afterglows.
△ Less
Submitted 8 December, 2019;
originally announced December 2019.
-
Characterization of Transition Edge Sensors for the Simons Observatory
Authors:
Jason R. Stevens,
Nicholas F. Cothard,
Eve M. Vavagiakis,
Aamir Ali,
Kam Arnold,
Jason E. Austermann,
Steve K. Choi,
Bradley J. Dober,
Cody Duell,
Shannon M. Duff,
Gene C. Hilton,
Shuay-Pwu Patty Ho,
Thuong D. Hoang,
Johannes Hubmayr,
Adrian T. Lee,
Aashrita Mangu,
Federico Nati,
Michael D. Niemack,
Christopher Raum,
Mario Renzullo,
Maria Salatino,
Trevor Sasse,
Sara M. Simon,
Suzanne Staggs,
Aritoki Suzuki
, et al. (9 additional authors not shown)
Abstract:
The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices…
▽ More
The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices have been fabricated for the Simons Observatory by NIST, Berkeley, and HYPRES/SeeQC corporation. Iterations of these devices have been tested cryogenically in order to inform the fabrication of further devices, which will culminate in the final TES designs to be deployed in the field. The detailed design specifications have been independently iterated at each fabrication facility for particular detector frequencies.
We present test results for prototype devices, with emphasis on NIST high frequency detectors. A dilution refrigerator was used to achieve the required temperatures. Measurements were made both with 4-lead resistance measurements and with a time domain Superconducting Quantum Interference Device (SQUID) multiplexer system. The SQUID readout measurements include analysis of current vs voltage (IV) curves at various temperatures, square wave bias step measurements, and detector noise measurements. Normal resistance, superconducting critical temperature, saturation power, thermal and natural time constants, and thermal properties of the devices are extracted from these measurements.
△ Less
Submitted 21 January, 2020; v1 submitted 2 December, 2019;
originally announced December 2019.
-
QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB
Authors:
M. Piat,
B. Bélier,
L. Bergé,
N. Bleurvacq,
C. Chapron,
S. Dheilly,
L. Dumoulin,
M. González,
L. Grandsire,
J. -Ch. Hamilton,
S. Henrot-Versillé,
D. T. Hoang,
S. Marnieros,
W. Marty,
L. Montier,
E. Olivieri,
C. Oriol,
C. Perbost,
D. Prêle,
D. Rambaud,
M. Salatino,
G. Stankowiak,
J. -P. Thermeau,
S. Torchinsky,
F. Voisin
, et al. (113 additional authors not shown)
Abstract:
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec…
▽ More
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province.
The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128.
The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.
△ Less
Submitted 9 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
-
On Node Features for Graph Neural Networks
Authors:
Chi Thang Duong,
Thanh Dat Hoang,
Ha The Hien Dang,
Quoc Viet Hung Nguyen,
Karl Aberer
Abstract:
Graph neural network (GNN) is a deep model for graph representation learning. One advantage of graph neural network is its ability to incorporate node features into the learning process. However, this prevents graph neural network from being applied into featureless graphs. In this paper, we first analyze the effects of node features on the performance of graph neural network. We show that GNNs wo…
▽ More
Graph neural network (GNN) is a deep model for graph representation learning. One advantage of graph neural network is its ability to incorporate node features into the learning process. However, this prevents graph neural network from being applied into featureless graphs. In this paper, we first analyze the effects of node features on the performance of graph neural network. We show that GNNs work well if there is a strong correlation between node features and node labels. Based on these results, we propose new feature initialization methods that allows to apply graph neural network to non-attributed graphs. Our experimental results show that the artificial features are highly competitive with real features.
△ Less
Submitted 20 November, 2019;
originally announced November 2019.
-
CASTER: Predicting Drug Interactions with Chemical Substructure Representation
Authors:
Kexin Huang,
Cao Xiao,
Trong Nghia Hoang,
Lucas M. Glass,
Jimeng Sun
Abstract:
Adverse drug-drug interactions (DDIs) remain a leading cause of morbidity and mortality. Identifying potential DDIs during the drug design process is critical for patients and society. Although several computational models have been proposed for DDI prediction, there are still limitations: (1) specialized design of drug representation for DDI predictions is lacking; (2) predictions are based on li…
▽ More
Adverse drug-drug interactions (DDIs) remain a leading cause of morbidity and mortality. Identifying potential DDIs during the drug design process is critical for patients and society. Although several computational models have been proposed for DDI prediction, there are still limitations: (1) specialized design of drug representation for DDI predictions is lacking; (2) predictions are based on limited labelled data and do not generalize well to unseen drugs or DDIs; and (3) models are characterized by a large number of parameters, thus are hard to interpret. In this work, we develop a ChemicAl SubstrucTurE Representation (CASTER) framework that predicts DDIs given chemical structures of drugs.CASTER aims to mitigate these limitations via (1) a sequential pattern mining module rooted in the DDI mechanism to efficiently characterize functional sub-structures of drugs; (2) an auto-encoding module that leverages both labelled and unlabelled chemical structure data to improve predictive accuracy and generalizability; and (3) a dictionary learning module that explains the prediction via a small set of coefficients which measure the relevance of each input sub-structures to the DDI outcome. We evaluated CASTER on two real-world DDI datasets and showed that it performed better than state-of-the-art baselines and provided interpretable predictions.
△ Less
Submitted 19 November, 2019; v1 submitted 14 November, 2019;
originally announced November 2019.
-
PatchNet: Hierarchical Deep Learning-Based Stable Patch Identification for the Linux Kernel
Authors:
Thong Hoang,
Julia Lawall,
Yuan Tian,
Richard J Oentaryo,
David Lo
Abstract:
Linux kernel stable versions serve the needs of users who value stability of the kernel over new features. The quality of such stable versions depends on the initiative of kernel developers and maintainers to propagate bug fixing patches to the stable versions. Thus, it is desirable to consider to what extent this process can be automated. A previous approach relies on words from commit messages a…
▽ More
Linux kernel stable versions serve the needs of users who value stability of the kernel over new features. The quality of such stable versions depends on the initiative of kernel developers and maintainers to propagate bug fixing patches to the stable versions. Thus, it is desirable to consider to what extent this process can be automated. A previous approach relies on words from commit messages and a small set of manually constructed code features. This approach, however, shows only moderate accuracy. In this paper, we investigate whether deep learning can provide a more accurate solution. We propose PatchNet, a hierarchical deep learning-based approach capable of automatically extracting features from commit messages and commit code and using them to identify stable patches. PatchNet contains a deep hierarchical structure that mirrors the hierarchical and sequential structure of commit code, making it distinctive from the existing deep learning models on source code. Experiments on 82,403 recent Linux patches confirm the superiority of PatchNet against various state-of-the-art baselines, including the one recently-adopted by Linux kernel maintainers.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Physical Model of Dust Polarization by Radiative Torque Alignment and Disruption and Implications for Grain Internal Structures
Authors:
Hyeseung Lee,
Thiem Hoang,
Ngan Le,
Jungyeon Cho
Abstract:
Dust polarization depends on the physical and mechanical properties of dust, as well as the properties of local environments. To understand how dust polarization varies with grain mechanical properties and the local environment, in this paper, we model the wavelength-dependence polarization of starlight and polarized dust emission by aligned grains by simultaneously taking into account grain align…
▽ More
Dust polarization depends on the physical and mechanical properties of dust, as well as the properties of local environments. To understand how dust polarization varies with grain mechanical properties and the local environment, in this paper, we model the wavelength-dependence polarization of starlight and polarized dust emission by aligned grains by simultaneously taking into account grain alignment and rotational disruption by radiative torques (RATs). We explore a wide range of the local radiation field and grain mechanical properties characterized by tensile strength. We find that the maximum polarization and the peak wavelength shift to shorter wavelengths as the radiation strength $U$ increases due to the enhanced alignment of small grains. Grain rotational disruption by RATs tends to decrease the optical-near infrared polarization but increases the ultraviolet polarization of starlight due to the conversion of large grains into smaller ones. In particular, we find that the submillimeter (submm) polarization degree at $850~μ\rm m$ ($P_{850}$) does not increase monotonically with the radiation strength or grain temperature ($T_{d}$), but it depends on the tensile strength of grain materials. Our physical model of dust polarization can be tested with observations toward star-forming regions or molecular clouds irradiated by a nearby star, which have higher radiation intensity than the average interstellar radiation field. Finally, we compare our predictions of the $P_{850}-T_{d}$ relationship with {\it Planck} data and find that the observed decrease of $P_{850}$ with $T_{d}$ can be explained when grain disruption by RATs is accounted for, suggesting that interstellar grains unlikely to have a compact structure but perhaps a composite one. The variation of the submm polarization with U (or $T_{d}$) can provide a valuable constraint on the internal structures of cosmic dust.
△ Less
Submitted 2 November, 2019;
originally announced November 2019.
-
Statistical Model Aggregation via Parameter Matching
Authors:
Mikhail Yurochkin,
Mayank Agarwal,
Soumya Ghosh,
Kristjan Greenewald,
Trong Nghia Hoang
Abstract:
We consider the problem of aggregating models learned from sequestered, possibly heterogeneous datasets. Exploiting tools from Bayesian nonparametrics, we develop a general meta-modeling framework that learns shared global latent structures by identifying correspondences among local model parameterizations. Our proposed framework is model-independent and is applicable to a wide range of model type…
▽ More
We consider the problem of aggregating models learned from sequestered, possibly heterogeneous datasets. Exploiting tools from Bayesian nonparametrics, we develop a general meta-modeling framework that learns shared global latent structures by identifying correspondences among local model parameterizations. Our proposed framework is model-independent and is applicable to a wide range of model types. After verifying our approach on simulated data, we demonstrate its utility in aggregating Gaussian topic models, hierarchical Dirichlet process based hidden Markov models, and sparse Gaussian processes with applications spanning text summarization, motion capture analysis, and temperature forecasting.
△ Less
Submitted 1 November, 2019;
originally announced November 2019.