-
Assessing Group-level Gender Bias in Professional Evaluations: The Case of Medical Student End-of-Shift Feedback
Authors:
Emmy Liu,
Michael Henry Tessler,
Nicole Dubosh,
Katherine Mosher Hiller,
Roger Levy
Abstract:
Although approximately 50% of medical school graduates today are women, female physicians tend to be underrepresented in senior positions, make less money than their male counterparts and receive fewer promotions. There is a growing body of literature demonstrating gender bias in various forms of evaluation in medicine, but this work was mainly conducted by looking for specific words using fixed d…
▽ More
Although approximately 50% of medical school graduates today are women, female physicians tend to be underrepresented in senior positions, make less money than their male counterparts and receive fewer promotions. There is a growing body of literature demonstrating gender bias in various forms of evaluation in medicine, but this work was mainly conducted by looking for specific words using fixed dictionaries such as LIWC and focused on recommendation letters. We use a dataset of written and quantitative assessments of medical student performance on individual shifts of work, collected across multiple institutions, to investigate the extent to which gender bias exists in a day-to-day context for medical students. We investigate differences in the narrative comments given to male and female students by both male or female faculty assessors, using a fine-tuned BERT model. This allows us to examine whether groups are written about in systematically different ways, without relying on hand-crafted wordlists or topic models. We compare these results to results from the traditional LIWC method and find that, although we find no evidence of group-level gender bias in this dataset, terms related to family and children are used more in feedback given to women.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Note: Nanomechanical characterization of soft materials using a micro-machined nanoforce transducer with an FIB-made pyramidal tip
Authors:
Zhi Li,
Sai Gao,
Uwe Brand,
Karla Hiller,
Nicole Wollschlaeger,
Frank Pohlenz
Abstract:
The quantitative nanomechanical characterization of soft materials using the nanoindentation technique requires further improvements in the performances of instruments, including their force resolution in particular. A micro-machined silicon nanoforce transducer based upon electrostatic comb drives featuring the force and depth resolutions down to 1 nN and 0.2 nm, respectively, is described. At th…
▽ More
The quantitative nanomechanical characterization of soft materials using the nanoindentation technique requires further improvements in the performances of instruments, including their force resolution in particular. A micro-machined silicon nanoforce transducer based upon electrostatic comb drives featuring the force and depth resolutions down to 1 nN and 0.2 nm, respectively, is described. At the end of the MEMS transducers main shaft, a pyramidal tip is fabricated using a focused ion beam facility. A proof-of-principle setup with this MEMS nanoindenter has been established to measure the mechanical properties of soft polydimethylsiloxane. First measurement results demonstrate that the prototype measurement system is able to quantitatively characterize soft materials with elastic moduli down to a few MPa.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
The ALFA Roman Pot Detectors of ATLAS
Authors:
S. Abdel Khalek,
B. Allongue,
F. Anghinolfi,
P. Barrillon,
G. Blanchot,
S. Blin-Bondil,
A. Braem,
L. Chytka,
P. Conde Muíño,
M. Düren,
P. Fassnacht,
S. Franz,
L. Gurriana,
P. Grafström,
M. Heller,
M. Haguenauer,
W. Hain,
P. Hamal,
K. Hiller,
W. Iwanski,
S. Jakobsen,
C. Joram,
U. Kötz,
K. Korcyl,
K. Kreutzfeldt
, et al. (20 additional authors not shown)
Abstract:
The ATLAS Roman Pot system is designed to determine the total proton-proton cross-section as well as the luminosity at the Large Hadron Collider (LHC) by measuring elastic proton scattering at very small angles. The system is made of four Roman Pot stations, located in the LHC tunnel in a distance of about 240~m at both sides of the ATLAS interaction point. Each station is equipped with tracking d…
▽ More
The ATLAS Roman Pot system is designed to determine the total proton-proton cross-section as well as the luminosity at the Large Hadron Collider (LHC) by measuring elastic proton scattering at very small angles. The system is made of four Roman Pot stations, located in the LHC tunnel in a distance of about 240~m at both sides of the ATLAS interaction point. Each station is equipped with tracking detectors, inserted in Roman Pots which approach the LHC beams vertically. The tracking detectors consist of multi-layer scintillating fibre structures readout by Multi-Anode-Photo-Multipliers.
△ Less
Submitted 24 November, 2016; v1 submitted 1 September, 2016;
originally announced September 2016.
-
Proceedings of the workshop: HERA and the LHC workshop series on the implications of HERA for LHC physics
Authors:
H. Jung,
A. De Roeck,
Z. J. Ajaltouni,
S. Albino,
G. Altarelli,
F. Ambroglini,
J. Anderson,
G. Antchev,
M. Arneodo,
P. Aspell,
V. Avati,
M. Bahr,
A. Bacchetta,
M. G. Bagliesi,
R. D. Ball,
A. Banfi,
S. Baranov,
P. Bartalini,
J. Bartels,
F. Bechtel,
V. Berardi,
M. Berretti,
G. Beuf,
M. Biasini,
I. Bierenbaum
, et al. (244 additional authors not shown)
Abstract:
2nd workshop on the implications of HERA for LHC physics. Working groups: Parton Density Functions Multi-jet final states and energy flows Heavy quarks (charm and beauty) Diffraction Cosmic Rays Monte Carlos and Tools
2nd workshop on the implications of HERA for LHC physics. Working groups: Parton Density Functions Multi-jet final states and energy flows Heavy quarks (charm and beauty) Diffraction Cosmic Rays Monte Carlos and Tools
△ Less
Submitted 30 March, 2009; v1 submitted 23 March, 2009;
originally announced March 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
The H1 Forward Proton Spectrometer at HERA
Authors:
P. van Esch,
M. Kapichine,
A. Morozov,
V. Spaskov,
W. Bartel,
B. List,
H. Mahlke-Krueger,
V. Schroeder,
T. Wilksen,
F. W. Buesser,
K. Geske,
O. Karschnik,
F. Niebergall,
H. Riege,
J. Schuett,
R. van Staa,
C. Wittek,
D. Dau,
D. Newton,
S. K. Kotelnikov,
A. Lebedev,
S. Rusakov,
A. Astvatsatourov,
J. Baehr,
U. Harder
, et al. (4 additional authors not shown)
Abstract:
The forward proton spectrometer is part of the H1 detector at the HERA collider. Protons with energies above 500 GeV and polar angles below 1 mrad can be detected by this spectrometer. The main detector components are scintillating fiber detectors read out by position-sensitive photo-multipliers. These detectors are housed in so-called Roman Pots which allow them to be moved close to the circula…
▽ More
The forward proton spectrometer is part of the H1 detector at the HERA collider. Protons with energies above 500 GeV and polar angles below 1 mrad can be detected by this spectrometer. The main detector components are scintillating fiber detectors read out by position-sensitive photo-multipliers. These detectors are housed in so-called Roman Pots which allow them to be moved close to the circulating proton beam. Four Roman Pot stations are located at distances between 60 m and 90 m from the interaction point.
△ Less
Submitted 20 January, 2000;
originally announced January 2000.