Showing 1–19 of 19 results for author: Hill, J T

Coupling a superconducting quantum circuit to a phononic crystal defect cavity

Authors: Patricio Arrangoiz-Arriola, E. Alex Wollack, Marek Pechal, Jeremy D. Witmer, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a… ▽ More Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a 6 gigahertz acoustic resonance to a wavelength-scale volume of less than one cubic micron. The strong piezoelectricity of lithium niobate efficiently couples the localized vibrations to the electric field of a widely tunable high-impedance Josephson junction array resonator. We measure a direct phonon-photon coupling rate $g/2π\approx 1.6 \, \mathrm{MHz}$ and a mechanical quality factor $Q_\mathrm{m} \approx 3 \times 10^4$ leading to a cooperativity $C\sim 4$ when the two modes are tuned into resonance. Our work has direct application to engineering hybrid quantum systems for microwave-to-optical conversion as well as emerging architectures for quantum information processing. △ Less

Submitted 10 April, 2018; originally announced April 2018.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. X 8, 031007 (2018)

A single-mode phononic wire

Authors: Rishi N. Patel, Zhaoyou Wang, Wentao Jiang, Christopher J. Sarabalis, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: Photons and electrons transmit information to form complex systems and networks. Phonons on the other hand, the quanta of mechanical motion, are often considered only as carriers of thermal energy. Nonetheless, their flow can also be molded in fabricated nanoscale circuits. We design and experimentally demonstrate wires for phonons that transmit information with little loss or scattering across a… ▽ More Photons and electrons transmit information to form complex systems and networks. Phonons on the other hand, the quanta of mechanical motion, are often considered only as carriers of thermal energy. Nonetheless, their flow can also be molded in fabricated nanoscale circuits. We design and experimentally demonstrate wires for phonons that transmit information with little loss or scattering across a chip. By patterning the surface of a silicon chip, we completely eliminate all but one channel of phonon conduction. We observe the emergence of low-loss standing waves in millimeter long phononic wires that we address and cool optically. Coherent transport and strong optical coupling to a phononic wire enables new phononic technologies to manipulate information and energy on a chip. △ Less

Submitted 2 November, 2017; originally announced November 2017.

Comments: 21 pages, 4+10 figures

Journal ref: Phys. Rev. Lett. 121, 040501 (2018)

Engineering phonon leakage in nanomechanical resonators

Authors: Rishi N. Patel, Christopher J. Sarabalis, Wentao Jiang, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanic… ▽ More We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanical waves on the surface of silicon, while leaving photon lifetimes unaffected. This demonstrates that phonon leakage can be engineered in on-chip optomechanical systems. We experimentally observe large fluctuations in leakage rates that we attribute to fabrication disorder and verify this using simulations. Our technique opens the way to engineering more complex on-chip phonon networks utilizing guided mechanical waves to connect quantum systems. △ Less

Submitted 22 May, 2017; originally announced May 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Applied 8, 041001 (2017)

High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate

Authors: Jeremy D. Witmer, Joseph A. Valery, Patricio Arrangoiz-Arriola, Christopher J. Sarabalis, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the dev… ▽ More Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical quality factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Comments: 9 pages, 4 figures

Journal ref: Scientific Reports 2017; 7: 46313

Release-free silicon-on-insulator cavity optomechanics

Authors: Christopher J. Sarabalis, Yanni D. Dahmani, Rishi N. Patel, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: We demonstrate optically coupled nanomechanical resonators fabricated on silicon-on-insulator. Silicon fin waveguides are used to control the dispersion of mechanical waves and engineer localized resonances by modulation of the fin properties. A photonic crystal cavity is designed to localize laser light near the fin and the mechanical motion is read out and modified by radiation pressure back-act… ▽ More We demonstrate optically coupled nanomechanical resonators fabricated on silicon-on-insulator. Silicon fin waveguides are used to control the dispersion of mechanical waves and engineer localized resonances by modulation of the fin properties. A photonic crystal cavity is designed to localize laser light near the fin and the mechanical motion is read out and modified by radiation pressure back-action. We expect devices and systems made from similar structures to enable co-integration of signal transduction and processing capabilities via electronic, photonic, and phononic degrees freedom in a single scalable platform. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Comments: 5 pages, 3 figures

Design of nanobeam photonic crystal resonators for a silicon-on-lithium-niobate platform

Authors: Jeremy D. Witmer, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that pat… ▽ More We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that patterning electrodes on such a system can yield an electro-optic coupling rate of 0.6 GHz/V (4 pm/V). △ Less

Submitted 19 April, 2016; originally announced April 2016.

Journal ref: Optics Express Vol. 24, Issue 6, pp. 5876-5885 (2016)

Guided acoustic and optical waves in silicon-on-insulator for Brillouin scattering and optomechanics

Authors: Christopher J. Sarabalis, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: We numerically study silicon waveguides on silica showing that it is possible to simultaneously guide optical and acoustic waves in the technologically important silicon on insulator (SOI) material system. Thin waveguides, or fins, exhibit geometrically softened mechanical modes at gigahertz frequencies with phase velocities below the Rayleigh velocity in glass, eliminating acoustic radiation loss… ▽ More We numerically study silicon waveguides on silica showing that it is possible to simultaneously guide optical and acoustic waves in the technologically important silicon on insulator (SOI) material system. Thin waveguides, or fins, exhibit geometrically softened mechanical modes at gigahertz frequencies with phase velocities below the Rayleigh velocity in glass, eliminating acoustic radiation losses. We propose slot waveguides on glass with telecom optical frequencies and strong radiation pressure forces resulting in Brillouin gains on the order of 500 and 50,000 1/(Wm) for backward and forward Brillouin scattering, respectively. △ Less

Submitted 16 April, 2016; originally announced April 2016.

Comments: 5 pages, 4 figures

Nonlinear radiation pressure dynamics in an optomechanical crystal

Authors: Alex G. Krause, Jeff T. Hill, Max Ludwig, Amir H. Safavi-Naeini, Jasper Chan, Florian Marquardt, Oskar Painter

Abstract: Utilizing a silicon nanobeam optomechanical crystal, we investigate the attractor diagram arising from the radiation pressure interaction between a localized optical cavity at $λ= 1552$nm and a mechanical resonance at $ω/2π= 3.72$GHz. At a temperature of $T \approx 10$K, highly nonlinear driving of mechanical motion is observed via continuous wave optical pum**. Introduction of a time-dependent… ▽ More Utilizing a silicon nanobeam optomechanical crystal, we investigate the attractor diagram arising from the radiation pressure interaction between a localized optical cavity at $λ= 1552$nm and a mechanical resonance at $ω/2π= 3.72$GHz. At a temperature of $T \approx 10$K, highly nonlinear driving of mechanical motion is observed via continuous wave optical pum**. Introduction of a time-dependent (modulated) optical pump is used to steer the system towards an otherwise inaccessible dynamically stable attractor in which mechanical self-oscillation occurs for an optical pump red-detuned from the cavity resonance. An analytical model incorporating thermo-optic effects due to optical absorption heating is developed, and found to accurately predict the measured device behavior. △ Less

Submitted 27 April, 2015; v1 submitted 22 April, 2015; originally announced April 2015.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 115, 233601 (2015)

Linear and nonlinear capacitive coupling of electro-opto-mechanical photonic crystal cavities

Authors: Alessandro Pitanti, Johannes M. Fink, Amir H. Safavi-Naeini, Chan U. Lei, Jeff T. Hill, Alessandro Tredicucci, Oskar Painter

Abstract: We fabricate and characterize a microscale silicon electro-opto-mechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a… ▽ More We fabricate and characterize a microscale silicon electro-opto-mechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a silicon surface quality necessary for minimizing optical loss. Using the sensitive optical read-out of the photonic crystal cavity, we characterize the linear and nonlinear capacitive coupling to the fundamental 63 MHz in-plane flexural motion of the structure, showing that the large electromechanical coupling in such devices may be suitable for realizing efficient microwave-to-optical signal conversion. △ Less

Submitted 10 July, 2014; originally announced July 2014.

Comments: 8 papers, 4 figures

Thermalization properties at mK temperatures of a nanoscale optomechanical resonator with acoustic-bandgap shield

Authors: Sean M. Meenehan, Justin D. Cohen, Simon Groeblacher, Jeff T. Hill, Amir H. Safavi-Naeini, Markus Aspelmeyer, Oskar Painter

Abstract: Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and dam** of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mec… ▽ More Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and dam** of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mechanical resonance is found to couple at a rate of 400Hz (Q=9x10^6) to a thermal bath of temperature 270mK. These measurements indicate that silicon optomechanical crystals cooled to millikelvin temperatures should be suitable for a variety of experiments involving coherent coupling between photons and phonons at the single quanta level. △ Less

Submitted 14 March, 2014; originally announced March 2014.

Comments: 11 pages, 9 figures

Two-dimensional phononic-photonic bandgap optomechanical crystal cavity

Authors: Amir H. Safavi-Naeini, Jeff T. Hill, Sean Meenehan, Jasper Chan, Simon Groeblacher, Oskar Painter

Abstract: We present the fabrication and characterization of an artificial crystal structure formed from a thin-film of silicon which has a full phononic bandgap for microwave X-band phonons and a two-dimensional pseudo-bandgap for near-infrared photons. An engineered defect in the crystal structure is used to localize optical and mechanical resonances in the bandgap of the planar crystal. Two-tone optical… ▽ More We present the fabrication and characterization of an artificial crystal structure formed from a thin-film of silicon which has a full phononic bandgap for microwave X-band phonons and a two-dimensional pseudo-bandgap for near-infrared photons. An engineered defect in the crystal structure is used to localize optical and mechanical resonances in the bandgap of the planar crystal. Two-tone optical spectroscopy is used to characterize the cavity system, showing a large vacuum coupling rate of 220kHz between the fundamental optical cavity resonance at 195THz and a co-localized mechanical resonance at 9.3GHz. △ Less

Submitted 7 January, 2014; originally announced January 2014.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 112, 153603 (2014)

Highly efficient coupling from an optical fiber to a nanoscale silicon optomechanical cavity

Authors: Simon Groeblacher, Jeff T. Hill, Amir H. Safavi-Naeini, Jasper Chan, Oskar Painter

Abstract: We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in princ… ▽ More We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of 85%. △ Less

Submitted 30 October, 2013; v1 submitted 4 September, 2013; originally announced September 2013.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 103, 181104 (2013)

Squeezing of light via reflection from a silicon micromechanical resonator

Authors: Amir H. Safavi-Naeini, Simon Groeblacher, Jeff T. Hill, Jasper Chan, Markus Aspelmeyer, Oskar Painter

Abstract: We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater t… ▽ More We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater than its thermal decoherence rate. By approaching the strong continuous measurement regime we observe, through homodyne detection, non-trivial modifications of the reflected light's vacuum fluctuation spectrum. In spite of the mechanical resonator's highly excited thermal state ($10,000$ phonons), we observe squeezing at the level of $4.5 \pm 0.5%$ below that of shot-noise over a few MHz bandwidth around the mechanical resonance frequency of 28 MHz. This squeezing is interpreted as an unambiguous quantum signature of radiation pressure shot-noise. △ Less

Submitted 13 March, 2013; v1 submitted 25 February, 2013; originally announced February 2013.

Comments: 24 pages, 18 figures

Laser noise in cavity-optomechanical cooling and thermometry

Authors: Amir H. Safavi-Naeini, Jasper Chan, Jeff T. Hill, Simon Groeblacher, Haixing Miao, Yanbei Chen, Markus Aspelmeyer, Oskar Painter

Abstract: We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser… ▽ More We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser noise squashing, are derived under various measurement conditions. Using this theory, we analyze our recent ground-state laser cooling and motional sideband asymmetry experiments with nanoscale optomechanical crystal resonators. △ Less

Submitted 9 October, 2012; originally announced October 2012.

Comments: 36 pages, 10 figures

Journal ref: New J. Phys. 15 035007 (2013)

Optimized optomechanical crystal cavity with acoustic radiation shield

Authors: Jasper Chan, Amir H. Safavi-Naeini, Jeff T. Hill, Sean Meenehan, Oskar Painter

Abstract: We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of… ▽ More We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of 5.1GHz, a mechanical Q-factor of 6.8x10^5 (at T=10K), and a zero-point-motion optomechanical coupling rate of g=1.1MHz. △ Less

Submitted 11 June, 2012; originally announced June 2012.

Comments: 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 101, 081115 (2012)

Coherent optical wavelength conversion via cavity-optomechanics

Authors: Jeff T. Hill, Amir H. Safavi-Naeini, Jasper Chan, Oskar Painter

Abstract: We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wav… ▽ More We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wavelength 1460 nm and a second cavity mode at 1545 nm with a 93% internal (2% external) peak efficiency. The thermal and quantum limiting noise involved in the conversion process is also analyzed, and in terms of an equivalent photon number signal level are found to correspond to an internal noise level of only 6 and 4x10-3 quanta, respectively. △ Less

Submitted 4 June, 2012; originally announced June 2012.

Comments: 11 pages, 7 figures, appendix

Journal ref: Nature Communications 3, 1196 (03 November 2012)

Measurement of the quantum zero-point motion of a nanomechanical resonator

Authors: Amir H. Safavi-Naeini, Jasper Chan, Jeff T. Hill, T. P. Mayer Alegre, Alex Krause, Oskar Painter

Abstract: We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature… ▽ More We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature of 18K using radiation pressure back-action stemming from the optical pum** of one of the optical cavity resonances. An optical probe beam, resonant with the second optical cavity resonance, is used to transduce the mechanical motion and determine the phonon occupancy of the mechanical mode. Measurement of the asymmetry between up-converted and down-converted photons of the probe beam yields directly the displacement noise power associated with the quantum zero-point motion of the mechanical oscillator, and provides an absolute calibration of the average phonon occupancy of the mechanical mode. △ Less

Submitted 23 August, 2011; originally announced August 2011.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 108, 033602 (2012)

Laser cooling of a nanomechanical oscillator into its quantum ground state

Authors: Jasper Chan, T. P. Mayer Alegre, Amir H. Safavi-Naeini, Jeff T. Hill, Alex Krause, Simon Groeblacher, Markus Aspelmeyer, Oskar Painter

Abstract: A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indic… ▽ More A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indicate that a final phonon mode occupancy of 0.85 +-0.04 is obtained. △ Less

Submitted 18 June, 2011; originally announced June 2011.

Comments: 18 pages, 10 figures

Journal ref: Nature 478, 89-92 (06 October 2011)

Electromagnetically Induced Transparency and Slow Light with Optomechanics

Authors: Amir H. Safavi-Naeini, Thiago P. Mayer Alegre, Jasper Chan, Matt Eichenfield, Martin Winger, Qiang Lin, Jeffrey T. Hill, Darrick Chang, Oskar Painter

Abstract: Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action… ▽ More Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action cooling and optical rigidity of the mechanical system. Conversely, the optical response of these systems is also modified in the presence of mechanical interactions, leading to strong nonlinear effects such as Electromagnetically Induced Transparency (EIT) and parametric normal-mode splitting. In atomic systems, seminal experiments and proposals to slow and stop the propagation of light, and their applicability to modern optical networks, and future quantum networks, have thrust EIT to the forefront of experimental study during the last two decades. In a similar fashion, here we use the optomechanical nonlinearity to control the velocity of light via engineered photon-phonon interactions. Our results demonstrate EIT and tunable optical delays in a nanoscale optomechanical crystal device, fabricated by simply etching holes into a thin film of silicon (Si). At low temperature (8.7 K), we show an optically-tunable delay of 50 ns with near-unity optical transparency, and superluminal light with a 1.4 microseconds signal advance. These results, while indicating significant progress towards an integrated quantum optomechanical memory, are also relevant to classical signal processing applications. Measurements at room temperature and in the analogous regime of Electromagnetically Induced Absorption (EIA) show the utility of these chip-scale optomechanical systems for optical buffering, amplification, and filtering of microwave-over-optical signals. △ Less

Submitted 14 December, 2010; v1 submitted 9 December, 2010; originally announced December 2010.

Comments: 15 pages, 9 figures

Journal ref: Nature 472, 69--73 (07 April 2011)