-
Magneto-Rayleigh-Taylor instability and feedthrough in a resistive liquid-metal liner of a finite thickness
Authors:
Paria Makaremi-Esfarjani,
Andrew J. Higgins
Abstract:
The effect of magnetic tension and diffusion on the perturbation growth of a liquid-metal liner subjected to the magneto-Rayleigh-Taylor (MRT) instability is investigated. An initially magnetic-field-free liquid-metal slab of finite thickness is surrounded by two lower-density regions. Within the lower region, a constant axial magnetic field of arbitrary magnitude is applied. The numerical examina…
▽ More
The effect of magnetic tension and diffusion on the perturbation growth of a liquid-metal liner subjected to the magneto-Rayleigh-Taylor (MRT) instability is investigated. An initially magnetic-field-free liquid-metal slab of finite thickness is surrounded by two lower-density regions. Within the lower region, a constant axial magnetic field of arbitrary magnitude is applied. The numerical examination of the MRT instability growth, initiated by a seeded perturbation parallel to the magnetic field at the liner's unstable interface, is performed for both perfectly conductive and resistive liners. To this end, a novel level set-based two-phase incompressible solver for ideal/resistive magnetohydrodynamic (MHD) flows within the finite-difference framework is introduced. Utilizing the implemented numerical toolkit, the impact of different Alfven numbers and magnetic Reynolds numbers on the MRT growth rate and feedthrough at the upper interface of the liner is studied. Accounting for the finite resistivity of the liner results in an increase in the MRT growth and feedthrough compared to the ideal MHD case. The results indicate that magnetic diffusion primarily affects the MRT growth rate for higher wavenumbers, while for smaller wavenumbers, the effect of finite resistivity is only observed over a longer duration of instability development. We further demonstrate that decreasing the Alfven number results in the faster emergence of the magnetic diffusion effect on the MRT growth rate. It is also observed that a greater electrical conductivity jump across the liner results in an increased perturbation growth. Lastly, the impact of surface tension on MRT instability growth for both ideal and resistive MHD cases is studied across different wavenumbers, specifically for Bond numbers related to fusion applications.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
A level set-based solver for two-phase incompressible flows: Extension to magnetic fluids
Authors:
Paria Makaremi-Esfarjani,
Andrew J. Higgins,
Alireza Najafi-Yazdi
Abstract:
Development of a two-phase incompressible solver for magnetic flows in the magnetostatic case is presented. The proposed numerical toolkit couples the Navier-Stokes equations of hydrodynamics with Maxwell's equations of electromagnetism to model the behaviour of magnetic flows in the presence of a magnetic field. To this end, a rigorous implementation of a second-order two-phase solver for incompr…
▽ More
Development of a two-phase incompressible solver for magnetic flows in the magnetostatic case is presented. The proposed numerical toolkit couples the Navier-Stokes equations of hydrodynamics with Maxwell's equations of electromagnetism to model the behaviour of magnetic flows in the presence of a magnetic field. To this end, a rigorous implementation of a second-order two-phase solver for incompressible nonmagnetic flows is introduced first. This solver is implemented in the finite-difference framework, where a fifth-order conservative level set method is employed to capture the evolution of the interface, along with an incompressible solver based on the projection scheme to model the fluids. The solver demonstrates excellent performance even with high density ratios across the interface (Atwood number $\approx 1$), while effectively preserving the mass conservation property. Subsequently, the numerical discretization of Maxwell's equations under the magnetostatic assumption is described in detail, utilizing the vector potential formulation. The primary second-order solver for two-phase flows is extended to the case of magnetic flows, by incorporating the Lorentz force into the momentum equation, accounting for high magnetic permeability ratios across the interface. The implemented solver is then utilized for examining the deformation of ferrofluid droplets in both quiescent and shear flow regimes across various susceptibility values of the droplets. The results suggest that increasing the susceptibility value of the ferrofluid droplet can affect its deformation and rotation in low capillary regimes. In higher capillary flows, increasing the magnetic permeability jump across the interface can further lead to droplet breakup as well. The effect of this property is also investigated for the Rayleigh-Taylor instability growth in magnetic fluids.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Two-Stage Block Orthogonalization to Improve Performance of $s$-step GMRES
Authors:
Ichitaro Yamazaki,
Andrew J. Higgins,
Erik G. Boman,
Daniel B. Szyld
Abstract:
On current computer architectures, GMRES' performance can be limited by its communication cost to generate orthonormal basis vectors of the Krylov subspace. To address this performance bottleneck, its $s$-step variant orthogonalizes a block of $s$ basis vectors at a time, potentially reducing the communication cost by a factor of $s$. Unfortunately, for a large step size $s$, the solver can genera…
▽ More
On current computer architectures, GMRES' performance can be limited by its communication cost to generate orthonormal basis vectors of the Krylov subspace. To address this performance bottleneck, its $s$-step variant orthogonalizes a block of $s$ basis vectors at a time, potentially reducing the communication cost by a factor of $s$. Unfortunately, for a large step size $s$, the solver can generate extremely ill-conditioned basis vectors, and to maintain stability in practice, a conservatively small step size is used, which limits the performance of the $s$-step solver. To enhance the performance using a small step size, in this paper, we introduce a two-stage block orthogonalization scheme. Similar to the original scheme, the first stage of the proposed method operates on a block of $s$ basis vectors at a time, but its objective is to maintain the well-conditioning of the generated basis vectors with a lower cost. The orthogonalization of the basis vectors is delayed until the second stage when enough basis vectors are generated to obtain higher performance.
Our analysis shows the stability of the proposed two-stage scheme. The performance is improved because while the same amount of computation as the original scheme is required, most of the communication is done at the second stage of the proposed scheme, reducing the overall communication requirements. Our performance results with up to 192 NVIDIA V100 GPUs on the Summit supercomputer demonstrate that when solving a 2D Laplace problem, the two-stage approach can reduce the orthogonalization time and the total time-to-solution by the respective factors of up to $2.6\times$ and $1.6\times$ over the original $s$-step GMRES, which had already obtained the respective speedups of $2.1\times$ and $1.8\times$ over the standard GMRES. Similar speedups were obtained for 3D problems and for matrices from the SuiteSparse Matrix Collection.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Analysis of Randomized Householder-Cholesky QR Factorization with Multisketching
Authors:
Andrew J. Higgins,
Daniel B. Szyld,
Erik G. Boman,
Ichitaro Yamazaki
Abstract:
CholeskyQR2 and shifted CholeskyQR3 are two state-of-the-art algorithms for computing tall-and-skinny QR factorizations since they attain high performance on current computer architectures. However, to guarantee stability, for some applications, CholeskyQR2 faces a prohibitive restriction on the condition number of the underlying matrix to factorize. Shifted CholeskyQR3 is stable but has $50\%$ mo…
▽ More
CholeskyQR2 and shifted CholeskyQR3 are two state-of-the-art algorithms for computing tall-and-skinny QR factorizations since they attain high performance on current computer architectures. However, to guarantee stability, for some applications, CholeskyQR2 faces a prohibitive restriction on the condition number of the underlying matrix to factorize. Shifted CholeskyQR3 is stable but has $50\%$ more computational and communication costs than CholeskyQR2. In this paper, a randomized QR algorithm called Randomized Householder-Cholesky (\texttt{rand\_cholQR}) is proposed and analyzed. Using one or two random sketch matrices, it is proved that with high probability, its orthogonality error is bounded by a constant of the order of unit roundoff for any numerically full-rank matrix, and hence it is as stable as shifted CholeskyQR3. An evaluation of the performance of \texttt{rand\_cholQR} on a NVIDIA A100 GPU demonstrates that for tall-and-skinny matrices, \texttt{rand\_cholQR} with multiple sketch matrices is nearly as fast as, or in some cases faster than, CholeskyQR2. Hence, compared to CholeskyQR2, \texttt{rand\_cholQR} is more stable with almost no extra computational or memory cost, and therefore a superior algorithm both in theory and practice.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Dynamic Soaring as a Means to Exceed the Solar Wind Speed
Authors:
Mathias N. Larrouturou,
Andrew J. Higgins,
Jeffrey K. Greason
Abstract:
A technique by which a spacecraft can interact with flows of ionized gas in space (the solar wind or interstellar medium) to be accelerated to velocities greater than the wind velocity is explored. Inspired by the dynamic soaring maneuvers performed by sea birds and gliders in which differences in wind speed are exploited to gain velocity, in the proposed technique a lift-generating spacecraft cir…
▽ More
A technique by which a spacecraft can interact with flows of ionized gas in space (the solar wind or interstellar medium) to be accelerated to velocities greater than the wind velocity is explored. Inspired by the dynamic soaring maneuvers performed by sea birds and gliders in which differences in wind speed are exploited to gain velocity, in the proposed technique a lift-generating spacecraft circles between regions of the heliosphere that have different wind speeds, gaining energy without the use of propellant and only modest onboard power requirements. The spacecraft motion can be modeled as a series of elastic collisions between regions of the medium moving at different speeds. Models of the trajectory are developed to predict the potential velocity gains and the maximum velocity that may be achieved in terms of the lift-to-drag ratio of the vehicle. A lift-generating mechanism is proposed in which power is extracted from the flow over the vehicle in the flight direction and then used to accelerate the surrounding medium in the transverse direction, generating lift. Large values of lift-to-drag ratio are shown to be possible in the case where a small transverse velocity is imparted over a large area of interaction. The requirement for large interaction area in the extremely low density of the heliosphere precludes the use of physical wings, but the use of plasma waves generated by compact, directional antennas to impart momentum on the surrounding medium is feasible, with R-waves, X-waves, Alfven, and magnetosonic waves appearing as promising candidates. A mission is defined in which dynamic soaring is performed on the termination shock of the heliosphere, speeds of 2% of c to be reached within 2.5 years of launch without the expenditure of propellant. The technique may comprise the first stage for a multistage mission to achieve true interstellar flight to other solar systems.
△ Less
Submitted 28 November, 2022; v1 submitted 26 November, 2022;
originally announced November 2022.
-
Structural Stability of a Lightsail for Laser-Driven Interstellar Flight
Authors:
Dan-Cornelius Savu,
Andrew J. Higgins
Abstract:
The structural stability of a lightsail under the laser flux necessary for interstellar flight is studied analytically and numerically. A sinusoidal perturbation is introduced into a two-dimensional thin-film sail to determine if the sail remains stable or if the perturbations grow in amplitude. A reflective material that gives specular reflection of the laser illumination is assumed in determinin…
▽ More
The structural stability of a lightsail under the laser flux necessary for interstellar flight is studied analytically and numerically. A sinusoidal perturbation is introduced into a two-dimensional thin-film sail to determine if the sail remains stable or if the perturbations grow in amplitude. A reflective material that gives specular reflection of the laser illumination is assumed in determining the resulting loading on the sail, although other reflection models can be incorporated as well. The quasi-static solution of the critical point between shape stability and instability is found by equating the bending moments induced on the sail due to radiation pressure with the restoring moments caused by the strength of the sail and the tension applied at the edges of the sail, permitting analytical expressions for the elastic modulus and boundary tension magnitude to be found as a function of sail properties and the amplitude and wave number of the initial perturbation. These expressions are also derived from a formal variational energy approach. A numerical model of the sail dynamics is developed by discretizing the sail into finite elements. By introducing torsional and rectilinear springs between the elements into the numerical model, a hierarchy of models is produced that can incorporate the effects of bending and applied tension. The numerical models permit the transient dynamics of a perturbed sail to be compared to the analytic results of the quasi-static analysis. The analytic expressions can correctly predict the stability boundary found in the numerical simulations. The stiffness required to make a sail stable against uncontrolled perturbation growth is shown to be unfeasible for known materials. A modest tensioning of the sail (e.g., via an inflatable structure or spinning of the sail) can maintain a stable sail shape under all wavelengths and amplitudes of perturbations.
△ Less
Submitted 25 October, 2022;
originally announced October 2022.
-
An Explosively Driven Launcher Capable of 10 km/s Projectile Velocities
Authors:
Justin Huneault,
Jason Loiseau,
Myles T. Hildebrand,
Andrew J. Higgins
Abstract:
Launching large (> 1 g) well-characterized projectiles to velocities beyond 10 km/s is of interest for a number of scientific fields but is beyond the reach of current hypervelocity launcher technology. This paper reports the development of an explosively driven light-gas gun that has demonstrated the ability to launch 8 mm diameter, 0.36 g magnesium projectiles to 10.4 km/s. The implosion-driven…
▽ More
Launching large (> 1 g) well-characterized projectiles to velocities beyond 10 km/s is of interest for a number of scientific fields but is beyond the reach of current hypervelocity launcher technology. This paper reports the development of an explosively driven light-gas gun that has demonstrated the ability to launch 8 mm diameter, 0.36 g magnesium projectiles to 10.4 km/s. The implosion-driven launcher (IDL) uses the linear implosion of a pressurized tube to shock-compress helium gas to a pressure of \SI{5}{\giga\pascal}, which then expands to propel a projectile to hypervelocity. The launch cycle of the IDL is explored with the use of down-bore velocimetry experiments and a quasi-one-dimensional internal ballistics solver. A detailed overview of the design of the 8 mm launcher is presented, with an emphasis on the unique considerations which arise from the explosively driven propellant compression and the resulting extreme pressures and temperatures. The high average driving pressure results in a launcher that is compact, with a total length typically less than a meter. The possibility to scale the design to larger projectile sizes (25 mm diameter) is demonstrated. Finally, concepts for a modified launch cycle which may allow the IDL to reach significantly greater projectile velocities are explored conceptually and with preliminary experiments.
△ Less
Submitted 29 June, 2022;
originally announced June 2022.
-
Wind--Pellet Shear Sailing
Authors:
Jeffrey K. Greason,
Dmytro Yakymenko,
Mathias N. Larrouturou,
Andrew J. Higgins
Abstract:
A propulsion concept in which a spacecraft interacts with high-velocity pellets and the interstellar medium is proposed. The pellets are slower than the spacecraft and are accelerated backwards as they are overtaken, imparting a forward acceleration on the spacecraft. This maneuver is possible due to the interaction with a fixed medium (interstellar medium, ISM); as the spacecraft travels through…
▽ More
A propulsion concept in which a spacecraft interacts with high-velocity pellets and the interstellar medium is proposed. The pellets are slower than the spacecraft and are accelerated backwards as they are overtaken, imparting a forward acceleration on the spacecraft. This maneuver is possible due to the interaction with a fixed medium (interstellar medium, ISM); as the spacecraft travels through the medium, it is able to extract power from the relative wind. This concept relies upon the relative velocities (shear) between the pellet stream and the fixed medium in order to concentrate the energy of the pellets into the spacecraft and is thus termed wind-pellet shear sailing. The equations governing the mass ratio of pellets to the spacecraft and its dependence on the final spacecraft velocity are derived; the critical role of the efficiency of the power extraction and transfer process is identified. Natural sources of energy are considered as a means to accelerate the pellets to velocities of 1000 to 6000 km/s. Techniques for onboard generation of power via electromagnetic interaction with the ISM are reviewed, with a repetitively stroked plasma magnet being identified as a promising approach. The necessity of the spacecraft to detect and track the pellets as they are overtaken dictates the desired properties of the pellets. Pellet pushers (accelerators) on board the spacecraft are also preliminarily explored in their engineering considerations, with electric field accelerators of charged nanometric particles, Lorentz-force accelerated ionized pellets, or expansion of vaporized pellets via a nozzle being highlighted as potential approaches. A preliminary mission profile is defined in which a 500-kg scientific payload is delivered to orbit about alpha-Centauri within 30 years, using wind-pellet shear sailing as the intermediate stage to bring the spacecraft from 2% to 5.5% of c.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Effect of spatial distribution of mesoscale heterogeneities on the shock-to-detonation transition in liquid nitromethane
Authors:
XiaoCheng Mi,
Louisa Michael,
Nikolaos Nikiforakis,
Andrew J. Higgins
Abstract:
The sensitizing effect of cavities in the form of microbubbles on the shock initiation of a homogeneous liquid explosive is studied computationally. While the presence of voids in an explosive has long been known to induce so-called hot spots that greatly accelerate the global reaction rate, the ability to computationally resolve the details of the interaction of the shock front with heterogeneiti…
▽ More
The sensitizing effect of cavities in the form of microbubbles on the shock initiation of a homogeneous liquid explosive is studied computationally. While the presence of voids in an explosive has long been known to induce so-called hot spots that greatly accelerate the global reaction rate, the ability to computationally resolve the details of the interaction of the shock front with heterogeneities existing on the scale of the detonation reaction zone has only recently become feasible. In this study, the influence of the spatial distribution of air-filled cavities has been examined, enabled by the use of graphic processing unit (GPU) accelerated computations that can resolve shock initiation and detonation propagation through an explosive while fully resolving features at the mesoscale. Different spatial distributions of cavities are examined in two-dimensional simulations, including regular arrays of cavities, slightly perturbed arrays, random arrays (with varying minimum spacing being imposed on the cavities), and randomly distributed clusters of cavities. The presence of the cavities is able to reduce the time required to initiate detonation---for a given input shock strength---by greater than 50%, in agreement with previous experimental results. Randomly distributing the cavities results in a 15-20% decrease in detonation initiation time in comparison to a regular array of cavities. Clustering the cavities---as would occur in the case of agglomeration---results in an additional 10% decrease in detonation initiation time in comparison to random arrays. The effect of clustering is shown not to be a result of the clusters forming an effectively larger cavity, but rather due to interactions between clusters upon shock loading occurring on the microscale.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Dimensional scaling of flame propagation in discrete particulate clouds
Authors:
Fredric Y. K. Lam,
XiaoCheng Mi,
Andrew J. Higgins
Abstract:
The critical dimension necessary for a flame to propagate in suspensions of fuel particles in oxidizer is studied analytically and numerically. Two types of models are considered: First, a continuum model, wherein the individual particulate sources are not resolved and the heat release is assumed spatially uniform, is solved via conventional finite difference techniques. Second, a discrete source…
▽ More
The critical dimension necessary for a flame to propagate in suspensions of fuel particles in oxidizer is studied analytically and numerically. Two types of models are considered: First, a continuum model, wherein the individual particulate sources are not resolved and the heat release is assumed spatially uniform, is solved via conventional finite difference techniques. Second, a discrete source model, wherein the heat diffusion from individual sources is modeled via superposition of the Green's function of each source, is employed to examine the influence of the random, discrete nature of the media. Heat transfer to cold, isothermal walls and to a layer of inert gas surrounding the reactive medium are considered as the loss mechanisms. Both cylindrical and rectangular (slab) geometries of the reactive medium are considered, and the flame speed is measured as a function of the diameter and thickness of the domains, respectively. In the continuum model with inert gas confinement, a universal scaling of critical diameter to critical thickness near 2:1 is found. In the discrete source model, as the time scale of heat release of the sources is made small compared to the interparticle diffusion time, the geometric scaling between cylinders and slabs exhibits values greater than 2:1. The ability of the flame in the discrete regime to propagate in thinner slabs than predicted by continuum scaling is attributed to the flame being able to exploit local fluctuations in concentration across the slab to sustain propagation. As the heat release time of the sources is increased, the discrete source model reverts back to results consistent with the continuum model. Implications of these results for experiments are discussed.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Meso-resolved simulations of shock-to-detonation transition in nitromethane with air-filled cavities
Authors:
XiaoCheng Mi,
Louisa Michael,
Eleftherios Ioannou,
Nikolaos Nikiforakis,
Andrew J. Higgins,
Hoi Dick Ng
Abstract:
Two-dimensional, meso-resolved numerical simulations are performed to investigate the complete shock-to-detonation transition (SDT) process in a mixture of liquid nitromethane (NM) and air-filled, circular cavities. The shock-induced initiation behaviors resulting from the cases with neat NM, NM with an array of regularly spaced cavities, and NM with randomly distributed cavities are examined. For…
▽ More
Two-dimensional, meso-resolved numerical simulations are performed to investigate the complete shock-to-detonation transition (SDT) process in a mixture of liquid nitromethane (NM) and air-filled, circular cavities. The shock-induced initiation behaviors resulting from the cases with neat NM, NM with an array of regularly spaced cavities, and NM with randomly distributed cavities are examined. For the case with randomly distributed cavities, hundreds of cavities are explicitly resolved in the simulations using a diffuse-interface approach to treat two immiscible fluids and GPU-enabled parallel computing. Without invoking any empirically calibrated, phenomenological models, the reaction rate in the simulations is governed by Arrhenius kinetics. For the cases with neat NM, the resulting SDT process features a superdetonation that evolves from a thermal explosion after a delay following the passage of the incident shock wave and eventually catches up with the leading shock front. For the cases wherein mesoscale heterogeneities are explicitly considered, a gradual SDT process is captured. These two distinct initiation behaviors for neat NM and heterogeneous NM mixtures agree with experimental findings. Via examining the global reaction rate of the mixture, a unique time scale characterizing the SDT process, i.e., the overtake time, is measured for each simulation. For an input shock pressure less than approximately $9.4~\mathrm{GPa}$, the overtake time resulting from a heterogeneous mixture is shorter than that for neat NM. This sensitizing effect is more pronounced for lower input shock pressures. A random distribution of cavities is found to be more effective in enhancing the SDT process than a regular array of cavities. Statistical analysis on the meso-resolved simulation data provides more insights into the mechanism of energy release underlying the SDT process.
△ Less
Submitted 15 May, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Propagation of gaseous detonation waves in a spatially inhomogeneous reactive medium
Authors:
XiaoCheng Mi,
Andrew J. Higgins,
Hoi Dick Ng,
Charles B. Kiyanda,
Nikolaos Nikiforakis
Abstract:
Detonation propagation in a compressible medium wherein the energy release has been made spatially inhomogeneous is examined via numerical simulation. The inhomogeneity is introduced via step functions in the reaction progress variable, with the local value of energy release correspondingly increased so as to maintain the same average energy density in the medium, and thus a constant Chapman Jougu…
▽ More
Detonation propagation in a compressible medium wherein the energy release has been made spatially inhomogeneous is examined via numerical simulation. The inhomogeneity is introduced via step functions in the reaction progress variable, with the local value of energy release correspondingly increased so as to maintain the same average energy density in the medium, and thus a constant Chapman Jouguet (CJ) detonation velocity. A one-step Arrhenius rate governs the rate of energy release in the reactive zones. The resulting dynamics of a detonation propagating in such systems with one-dimensional layers and two-dimensional squares are simulated using a Godunov-type finite-volume scheme. The resulting wave dynamics are analyzed by computing the average wave velocity and one-dimensional averaged wave structure. In the case of sufficiently inhomogeneous media wherein the spacing between reactive zones is greater than the inherent reaction zone length, average wave speeds significantly greater than the corresponding CJ speed of the homogenized medium are obtained. If the shock transit time between reactive zones is less than the reaction time scale, then the classical CJ detonation velocity is recovered. The spatio-temporal averaged structure of the waves in these systems is analyzed via a Favre averaging technique, with terms associated with the thermal and mechanical fluctuations being explicitly computed. The analysis of the averaged wave structure identifies the super-CJ detonations as weak detonations owing to the existence of mechanical non-equilibrium at the effective sonic point embedded within the wave structure. The correspondence of the super-CJ behavior identified in this study with real detonation phenomena that may be observed in experiments is discussed.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
Front Roughening of Flames in Discrete Media
Authors:
Fredric Lam,
XiaoCheng Mi,
Andrew J. Higgins
Abstract:
The morphology of flame fronts propagating in reactive systems comprised of randomly positioned, point-like sources is studied. The solution of the temperature field and the initiation of new sources is implemented using the superposition of the Green's function for the diffusion equation, eliminating the need to use finite difference approximations. The heat released from triggered sources diffus…
▽ More
The morphology of flame fronts propagating in reactive systems comprised of randomly positioned, point-like sources is studied. The solution of the temperature field and the initiation of new sources is implemented using the superposition of the Green's function for the diffusion equation, eliminating the need to use finite difference approximations. The heat released from triggered sources diffuses outward from each source, activating new sources and enabling a mechanism of flame propagation. Systems of $40000$ sources in a $200$ by $200$ two-dimensional domain were tracked using computer simulations, and statistical ensembles of $120$ realizations of each system were averaged to determine the statistical properties of the flame fronts. The reactive system of sources is parameterized by two non-dimensional values: The heat release time (normalized by interparticle diffusion time) and the ignition temperature (normalized by adiabatic flame temperature). These two parameters were systematically varied for different simulations to investigate their influence on front propagation. For sufficiently fast heat release and low ignition temperature, the front roughness (defined as the RMS deviation of the ignition temperature contour from the average flame position) grew following a power law dependence that was in excellent agreement with the KPZ universality class ($β= 1/3$). As the reaction time was increased, lower values of the roughening exponent were observed, and at a sufficiently great value of reaction time, reversion to a steady, constant-width thermal flame was observed that matched the solution from classical combustion theory. Deviation away from KPZ scaling was also observed as the ignition temperature was increased. The features of this system that permit it to exhibit both KPZ and non-KPZ scaling are discussed.
△ Less
Submitted 25 January, 2017;
originally announced January 2017.
-
Effect of spatial discretization of energy on detonation wave propagation
Authors:
XiaoCheng Mi,
Evgeny V. Timofeev,
Andrew J. Higgins
Abstract:
Detonation propagation in the limit of highly spatially discretized energy sources is investigated. The model of this problem begins with a medium consisting of a calorically perfect gas with a prescribed energy release per unit mass. The energy release is collected into sheet-like sources that are now embedded in an inert gas that fills the spaces between them. The release of energy in the first…
▽ More
Detonation propagation in the limit of highly spatially discretized energy sources is investigated. The model of this problem begins with a medium consisting of a calorically perfect gas with a prescribed energy release per unit mass. The energy release is collected into sheet-like sources that are now embedded in an inert gas that fills the spaces between them. The release of energy in the first sheet results in a planar blast wave that propagates to the next source, which is triggered after a prescribed delay, generating a new blast, and so forth. The resulting wave dynamics as the front passes through hundreds of such sources is computationally simulated by numerically solving the governing one-dimensional Euler equations in the lab-fixed reference frame. The average wave speed for each simulation is measured once the wave propagation has reached a quasi-periodic solution. Velocities in excess of the CJ speed are found as the sources are made increasingly discrete, with the deviation above CJ being as great as $15\%$. The total energy release, delay time, and whether the sources remain lab-fixed or are convected with the flow do not have a significant influence on the deviation of the average wave speed away from CJ. Such continuous waves can also be shown to have a time-averaged structure consistent with the classical ZND structure of a detonation. In the limit of highly discrete sources, temporal averaging of the wave structure shows that the effective sonic surface does not correspond to an equilibrium state. The average state of the flow leaving the wave in this case does eventually reach the equilibrium Hugoniot, but only after the effective sonic surface has been crossed. Thus, the super-CJ waves observed in the limit of highly discretized sources can be understood as weak detonations due to the non-equilibrium state at the effective sonic surface.
△ Less
Submitted 27 August, 2016;
originally announced August 2016.
-
The Influence of Spatial Discreteness on the Thermo-Diffusive Instability of Flame Propagation with Infinite Lewis Number
Authors:
XiaoCheng Mi,
Andrew J. Higgins,
Samuel Goroshin,
Jeffrey M. Bergthorson
Abstract:
The dynamics of flame propagation in systems with infinite Lewis number and spatially discretized sources of heat release is examined, which is applicable to the combustion of suspensions of fuel particles in air. The system is analyzed numerically using a one-dimensional heat equation with a source term for the reaction progress variable, which is specified to have zero diffusivity, and the model…
▽ More
The dynamics of flame propagation in systems with infinite Lewis number and spatially discretized sources of heat release is examined, which is applicable to the combustion of suspensions of fuel particles in air. The system is analyzed numerically using a one-dimensional heat equation with a source term for the reaction progress variable, which is specified to have zero diffusivity, and the model reveals a spectrum of flame-propagation regimes. For the case of a switch-type reaction rate and homogeneous media (continuous regime), the flame propagates steadily at a velocity in agreement with analytical solutions. As the sources are spatially concentrated into δ-function-like sources, propagation approaches the discrete regime with a fixed period between ignition of the sources, for which an analytic solution is also available for validation. When the source term is governed by an Arrhenius rate and the activation energy is increased beyond the stability boundary, the flame begins to exhibit a long-wavelength (4-5 times the thermal flame thickness) oscillation characteristic of the thermo-diffusive instability, in good agreement with prior stability analysis. When spatial discreteness is introduced, a competition is observed between the long-period oscillations of the thermo-diffusive instability and the pulsations associated with the rapid heat release of the concentrated sources. Interestingly, the presence of spatial discreteness is able to excite higher modes (period doubling and chaotic solutions) of the thermo-diffusive instability, suggesting that the introduction of discreteness may have an influence qualitatively similar to that of increasing activation energy. Relevance of the model parameters to experimental systems is then discussed.
△ Less
Submitted 12 June, 2016; v1 submitted 4 December, 2015;
originally announced December 2015.
-
Reconciling a Reactionless Propulsive Drive with the First Law of Thermodynamics
Authors:
Andrew J. Higgins
Abstract:
A "space drive" is a hypothetical device that generates a propulsive force in free space using an input of power without the need for a reaction mass. Any device that generates photons (e.g., a laser) would qualify as a propellantless "photon rocket," but the force generated by emitting photons per power input (3.33 $μ$N/kW) is too small to be a practical propulsion device. The ability to generate…
▽ More
A "space drive" is a hypothetical device that generates a propulsive force in free space using an input of power without the need for a reaction mass. Any device that generates photons (e.g., a laser) would qualify as a propellantless "photon rocket," but the force generated by emitting photons per power input (3.33 $μ$N/kW) is too small to be a practical propulsion device. The ability to generate greater force per power input would be highly desirable, but, as demonstrated in this paper, such a device would be able to operate as a perpetual motion machine of the first kind. Since applying a constant force results in a constant acceleration, the kinetic energy of a mass driven by such a device increases quadratically with time, while the energy input increases only linearly with time. Thus, at some point, the kinetic energy of the device-driven mass exceeds the energy input, and if this energy is collected via decelerating the mass (via regenerative electromagnetic braking, for example), then there would be a net gain in energy. For devices with thrust-to-power ratios on the order of 1 N/kW that have been discussed recently in connection with the so-called EM drive, this breakeven occurs at velocities low enough to be feasible with current technology, clearly demonstrating the absurdity of such a device. When relativistic effects are taken into account, it is shown that the photon rocket can only reach energy breakeven as the accelerated mass asymptotically approaches the speed of light. Thus, any device with a thrust-to-power ratio greater than the photon rocket would be able to operate as a perpetual motion machine of the first kind, and thus should be excluded by the First Law of Thermodynamics.
△ Less
Submitted 7 May, 2015;
originally announced June 2015.
-
Influence of Discrete Sources on Detonation Propagation in a Burgers Equation Analog System
Authors:
XiaoCheng Mi,
Andrew J. Higgins
Abstract:
An analog to the equations of compressible flow that is based on the inviscid Burgers equation is utilized to investigate the effect of spatial discreteness of energy release on the propagation of a detonation wave. While the traditional Chapman-Jouguet (CJ) treatment of a detonation wave assumes that the energy release of the medium is homogeneous through space, the system examined here consists…
▽ More
An analog to the equations of compressible flow that is based on the inviscid Burgers equation is utilized to investigate the effect of spatial discreteness of energy release on the propagation of a detonation wave. While the traditional Chapman-Jouguet (CJ) treatment of a detonation wave assumes that the energy release of the medium is homogeneous through space, the system examined here consists of sources represented by $δ$-functions embedded in an otherwise inert medium. The sources are triggered by the passage of the leading shock wave following a delay that is either of fixed period or randomly generated. The solution for wave propagation through a large array ($10^3$-$10^4$) of sources in one dimension can be constructed without the use of a finite difference approximation by tracking the interaction of sawtooth-profiled waves for which an analytic solution is available. A detonation-like wave results from the interaction of the shock and rarefaction waves generated by the sources. The measurement of the average velocity of the leading shock front for systems of both regular, fixed-period and randomized sources is found to be in close agreement with the velocity of the equivalent CJ detonation in a uniform medium wherein the sources have been spatially homogenized. This result may have implications for the applicability of the CJ criterion to detonations in highly heterogeneous media (e.g., polycrystalline, solid explosives) and unstable detonations with a transient and multidimensional structure (e.g., gaseous detonation waves).
△ Less
Submitted 1 February, 2015;
originally announced February 2015.
-
Propagation Distance Required to Reach Steady-State Detonation Velocity in Finite-Sized Charges
Authors:
Jianling Li,
XiaoCheng Mi,
Andrew J. Higgins
Abstract:
The decay of a detonation wave from its initial CJ velocity to its final, steady state velocity upon encountering a finite thickness or diameter charge is investigated numerically and theoretically. The numerical simulations use an ideal gas equation of state and pressure dependent reaction rate in order to ensure a stable wave structure. The confinement is also treated as an ideal gas with variab…
▽ More
The decay of a detonation wave from its initial CJ velocity to its final, steady state velocity upon encountering a finite thickness or diameter charge is investigated numerically and theoretically. The numerical simulations use an ideal gas equation of state and pressure dependent reaction rate in order to ensure a stable wave structure. The confinement is also treated as an ideal gas with variable impedance. The velocity decay along the centerline is extracted from the simulations and compared to predictions base on a front evolution equation that uses the steady state detonation velocity-front curvature relation ($D_n-κ$). This model fails to capture the finite signaling speed of the leading rarefaction resulting from the interaction with the yielding confinement. This signaling speed is verified to be the maximum signal velocity occurring in the ideal ZND wave structure of the initial CJ velocity. A simple heuristic model based on the rarefaction generated by a one-dimensional interaction between the post-shock state and the confinement is proposed to provide an approximate description of the rest of the relaxation to steady state velocity.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Effect of Spatial Heterogeneity on Near-Limit Propagation of a Stable Detonation
Authors:
Jianling Li,
Xiaocheng Mi,
Andrew J. Higgins
Abstract:
The effect of introducing a spatial heterogeneity into an explosive medium is studied computationally by examining the detonation velocity near the limit to propagation in a thin explosive layer. The explosive system studied is an ideal gas with a single exothermic reaction governed by a pressure-dependent reaction rate ($p^n$) with a pressure exponent of $n = 3$. A pressure-dependent reaction rat…
▽ More
The effect of introducing a spatial heterogeneity into an explosive medium is studied computationally by examining the detonation velocity near the limit to propagation in a thin explosive layer. The explosive system studied is an ideal gas with a single exothermic reaction governed by a pressure-dependent reaction rate ($p^n$) with a pressure exponent of $n = 3$. A pressure-dependent reaction rate, rather than the exponential dependence of reaction on temperature of Arrhenius kinetics, is used so that the detonation wave is stable in the homogeneous case and can be modelled with simple, analytical techniques, and thus the effect of introducing heterogeneity can be clearly identified. The two-dimensional slab of explosive is bounded by a layer of inert gas with the same thermodynamic properties as the explosive. The heterogeneity is introduced into the explosive via a large-amplitude, two-dimensional sinusoidal ripple in density in the initialization of the simulation, while maintaining a constant pressure. The computational simulations are initialized with a ZND solution for the ideal CJ detonation, and the detonation is allowed to propagate into the explosive layer. The simulations show that the detonation in the heterogeneous media exhibits a cellular-like structure of complex shock interactions. The detonation is able to propagate into a significantly thinner layer of explosive and can exhibit a greater velocity than the corresponding homogeneous case. A parametric study of varying the wavelength of the sinusoid shows the existence of an optimal size of heterogeneity at which the favorable effect is the greatest corresponding to a wavelength that is approximately 10 to 50 times the half reaction zone length of the ideal CJ detonation. As the wavelength is decreased to the size of the reaction zone length, the behavior reverts back to the homogeneous case.
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Geometric Scaling for a Detonation Wave Governed by a Pressure-Dependent Reaction Rate and Yielding Confinement
Authors:
Jianling Li,
XiaoCheng Mi,
Andrew J. Higgins
Abstract:
The propagation of detonation waves in reactive media bounded by an inert, compressible layer is examined via computational simulations in two different geometries, axisymmetric cylinders and two dimensional, planar slabs. For simplicity, an ideal gas equation of state is used with a pressure-dependent reaction rate that results in a stable detonation wave structure. The detonation is initiated as…
▽ More
The propagation of detonation waves in reactive media bounded by an inert, compressible layer is examined via computational simulations in two different geometries, axisymmetric cylinders and two dimensional, planar slabs. For simplicity, an ideal gas equation of state is used with a pressure-dependent reaction rate that results in a stable detonation wave structure. The detonation is initiated as an ideal Chapman-Jouguet (CJ) detonation with a one-dimensional structure, and then allowed to propagate into a finite diameter or thickness layer of explosive surrounded by an inert layer. The yielding confinement of the inert layer results in the detonation wave decaying to a sub-CJ steady state velocity or failing entirely. Simulations are performed with different values of the reaction rate pressure exponent (n = 2 and 3) and different impedance confinement (greater than, less than, and equal to the confinement of the explosive). The velocity decrement and critical dimension (critical diameter or thickness) are determined, and a 2:1 scaling between the cylinder diameter and slab thickness results is confirmed, in good agreement with curvature-based models of detonation propagation. The measured shock front curvature and detonation velocity relation agrees with the classic model of Wood and Kirkwood. The computational simulations are compared to a simple, analytic model that treats the interaction of the confinement with the detonation products via Newtonian theory and a model that assumes a continuous variation in shock front curvature with the shock angle at the interface with the confinement matching the angle determined by shock polar analysis. The Newtonian model works very well for the case of high impedance confinement, while the shock front curvature model agrees with the simulations for the case of low impedance confinement.
△ Less
Submitted 9 July, 2014; v1 submitted 29 May, 2014;
originally announced May 2014.
-
The Effect of Particle Strength on the Ballistic Resistance of Shear Thickening Fluids
Authors:
Oren E. Petel,
Simon Ouellet,
Jason Loiseau,
Bradley J. Marr,
David L. Frost,
Andrew J. Higgins
Abstract:
The response of shear thickening fluids (STFs) under ballistic impact has received considerable attention due to its field-responsive nature. While efforts have primarily focused on the response of traditional ballistic fabrics impregnated with fluids, the response of pure STFs to penetration has received limited attention. In the present study, the ballistic response of pure STFs is investigated…
▽ More
The response of shear thickening fluids (STFs) under ballistic impact has received considerable attention due to its field-responsive nature. While efforts have primarily focused on the response of traditional ballistic fabrics impregnated with fluids, the response of pure STFs to penetration has received limited attention. In the present study, the ballistic response of pure STFs is investigated and the effect of fluid density and particle strength on ballistic performance is isolated. The loss of ballistic resistance of STFs at higher impact velocities is governed by particle strength, indicating the range of velocities over which they may provide effective armor solutions.
△ Less
Submitted 1 April, 2013; v1 submitted 4 July, 2012;
originally announced July 2012.
-
Ballistic Impact of Dense Particle Suspensions
Authors:
Bradley J. Marr,
Oren E. Petel,
Andrew J. Higgins,
David L. Frost,
Simon Ouellet
Abstract:
The ballistic impact of various dense particle suspensions is of interest for the development of superior materials for personal protective equipment. The dynamic response of the fluids under impact of a fragment simulating projectile at various incident velocities was examined for this purpose. High-speed fluid dynamic videos of these ballistic impacts were used to analyze the effects of various…
▽ More
The ballistic impact of various dense particle suspensions is of interest for the development of superior materials for personal protective equipment. The dynamic response of the fluids under impact of a fragment simulating projectile at various incident velocities was examined for this purpose. High-speed fluid dynamic videos of these ballistic impacts were used to analyze the effects of various suspension parameters on the response of the fluids. It was found experimentally that the shear thickening behaviour of the suspensions dominated the response at low incident velocities, but the results converge based on density at higher impact velocities.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.