Showing 1–15 of 15 results for author: Hiemstra, R R

A locking-free isogeometric thin shell formulation based on higher order accurate local strain projection via approximate dual splines

Authors: Thi-Hoa Nguyen, René R. Hiemstra, Dominik Schillinger

Abstract: We present a novel isogeometric discretization approach for the Kirchhoff-Love shell formulation based on the Hellinger-Reissner variational principle. For mitigating membrane locking, we discretize the independent strains with spline basis functions that are one degree lower than those used for the displacements. To enable computationally efficient condensation of the independent strains, we firs… ▽ More We present a novel isogeometric discretization approach for the Kirchhoff-Love shell formulation based on the Hellinger-Reissner variational principle. For mitigating membrane locking, we discretize the independent strains with spline basis functions that are one degree lower than those used for the displacements. To enable computationally efficient condensation of the independent strains, we first discretize the variations of the independent strains with approximate dual splines to obtain a projection matrix that is close to a diagonal matrix. We then diagonalize this strain projection matrix via row-sum lum**. The combination of approximate dual test functions with row-sum lum** enables the direct condensation of the independent strain fields at the quadrature point level, while maintaining higher-order accuracy at optimal rates of convergence. We illustrate the numerical properties and the performance of our approach through numerical benchmarks, including a curved Euler-Bernoulli beam and the examples of the shell obstacle course. △ Less

Submitted 24 June, 2024; originally announced June 2024.

The matrix-free macro-element hybridized Discontinuous Galerkin method for steady and unsteady compressible flows

Authors: Vahid Badrkhani, Marco F. P. ten Eikelder, Rene R. Hiemstra, Dominik Schillinger

Abstract: The macro-element variant of the hybridized discontinuous Galerkin (HDG) method combines advantages of continuous and discontinuous finite element discretization. In this paper, we investigate the performance of the macro-element HDG method for the analysis of compressible flow problems at moderate Reynolds numbers. To efficiently handle the corresponding large systems of equations, we explore sev… ▽ More The macro-element variant of the hybridized discontinuous Galerkin (HDG) method combines advantages of continuous and discontinuous finite element discretization. In this paper, we investigate the performance of the macro-element HDG method for the analysis of compressible flow problems at moderate Reynolds numbers. To efficiently handle the corresponding large systems of equations, we explore several strategies at the solver level. On the one hand, we devise a second-layer static condensation approach that reduces the size of the local system matrix in each macro-element and hence the factorization time of the local solver. On the other hand, we employ a multi-level preconditioner based on the FGMRES solver for the global system that integrates well within a matrix-free implementation. In addition, we integrate a standard diagonally implicit Runge-Kutta scheme for time integration. We test the matrix-free macro-element HDG method for compressible flow benchmarks, including Couette flow, flow past a sphere, and the Taylor-Green vortex. Our results show that unlike standard HDG, the macro-element HDG method can operate efficiently for moderate polynomial degrees, as the local computational load can be flexibly increased via mesh refinement within a macro-element. Our results also show that due to the balance of local and global operations, the reduction in degrees of freedom, and the reduction of the global problem size and the number of iterations for its solution, the macro-element HDG method can be a competitive option for the analysis of compressible flow problems. △ Less

Submitted 26 February, 2024; v1 submitted 17 February, 2024; originally announced February 2024.

Matrix-free polynomial preconditioning of saddle point systems using the hyper-power method

Authors: Michał Łukasz Mika, Marco ten Eikelder, Dominik Schillinger, René Rinke Hiemstra

Abstract: This study explores the integration of the hyper-power sequence, a method commonly employed for approximating the Moore-Penrose inverse, to enhance the effectiveness of an existing preconditioner. The approach is closely related to polynomial preconditioning based on Neumann series. We commence with a state-of-the-art matrix-free preconditioner designed for the saddle point system derived from iso… ▽ More This study explores the integration of the hyper-power sequence, a method commonly employed for approximating the Moore-Penrose inverse, to enhance the effectiveness of an existing preconditioner. The approach is closely related to polynomial preconditioning based on Neumann series. We commence with a state-of-the-art matrix-free preconditioner designed for the saddle point system derived from isogeometric structure-preserving discretization of the Stokes equations. Our results demonstrate that incorporating multiple iterations of the hyper-power method enhances the effectiveness of the preconditioner, leading to a substantial reduction in both iteration counts and overall solution time for simulating Stokes flow within a 3D lid-driven cavity. Through a comprehensive analysis, we assess the stability, accuracy, and numerical cost associated with the proposed scheme. △ Less

Submitted 12 November, 2023; originally announced November 2023.

MSC Class: 65N30; 65F08; 65F10; 65F30

Nonlinear dynamic analysis of shear- and torsion-free rods using isogeometric discretization and outlier removal

Authors: Thi-Hoa Nguyen, Bruno A. Roccia, René R. Hiemstra, Cristian G. Gebhardt, Dominik Schillinger

Abstract: In this paper, we present a discrete formulation of nonlinear shear- and torsion-free rods introduced by Gebhardt and Romero in [20] that uses isogeometric discretization and robust time integration. Omitting the director as an independent variable field, we reduce the number of degrees of freedom and obtain discrete solutions in multiple copies of the Euclidean space (R^3), which is larger than t… ▽ More In this paper, we present a discrete formulation of nonlinear shear- and torsion-free rods introduced by Gebhardt and Romero in [20] that uses isogeometric discretization and robust time integration. Omitting the director as an independent variable field, we reduce the number of degrees of freedom and obtain discrete solutions in multiple copies of the Euclidean space (R^3), which is larger than the corresponding multiple copies of the manifold (R^3 x S^2) obtained with standard Hermite finite elements. For implicit time integration, we choose the same integration scheme as Gebhardt and Romero in [20] that is a hybrid form of the midpoint and the trapezoidal rules. In addition, we apply a recently introduced approach for outlier removal by Hiemstra et al. [26] that reduces high-frequency content in the response without affecting the accuracy, ensuring robustness of our nonlinear discrete formulation. We illustrate the efficiency of our nonlinear discrete formulation for static and transient rods under different loading conditions, demonstrating good accuracy in space, time and the frequency domain. Our numerical example coincides with a relevant application case, the simulation of mooring lines. △ Less

Submitted 22 March, 2024; v1 submitted 19 September, 2023; originally announced September 2023.

Fourier analysis of membrane locking and unlocking

Authors: Rene R. Hiemstra, Federico Fuentes, Dominik Schillinger

Abstract: Membrane locking in finite element approximations of thin beams and shells has remained an unresolved topic despite four decades of research. In this article, we utilize Fourier analysis of the complete spectrum of natural vibrations and propose a criterion to identify and evaluate the severity of membrane locking. To demonstrate our approach, we utilize standard and mixed Galerkin formulations ap… ▽ More Membrane locking in finite element approximations of thin beams and shells has remained an unresolved topic despite four decades of research. In this article, we utilize Fourier analysis of the complete spectrum of natural vibrations and propose a criterion to identify and evaluate the severity of membrane locking. To demonstrate our approach, we utilize standard and mixed Galerkin formulations applied to a circular Euler-Bernoulli ring discretized using uniform, periodic B-splines. By analytically computing the discrete Fourier operators, we obtain an exact representation of the normalized error across the entire spectrum of eigenvalues. Our investigation addresses key questions related to membrane locking, including mode susceptibility, the influence of polynomial order, and the impact of shell/beam thickness and radius of curvature. Furthermore, we compare the effectiveness of mixed and standard Galerkin methods in mitigating locking. By providing insights into the parameters affecting locking and introducing a criterion to evaluate its severity, this research contributes to the development of improved numerical methods for thin beams and shells. △ Less

Submitted 13 June, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

MSC Class: 65D07; 65N12; 65N15; 65N25; 65N30

Towards higher-order accurate mass lum** in explicit isogeometric analysis for structural dynamics

Authors: Thi-Hoa Nguyen, René R. Hiemstra, Sascha Eisenträger, Dominik Schillinger

Abstract: We present a mass lum** approach based on an isogeometric Petrov-Galerkin method that preserves higher-order spatial accuracy in explicit dynamics calculations irrespective of the polynomial degree of the spline approximation. To discretize the test function space, our method uses an approximate dual basis, whose functions are smooth, have local support and satisfy approximate bi-orthogonality w… ▽ More We present a mass lum** approach based on an isogeometric Petrov-Galerkin method that preserves higher-order spatial accuracy in explicit dynamics calculations irrespective of the polynomial degree of the spline approximation. To discretize the test function space, our method uses an approximate dual basis, whose functions are smooth, have local support and satisfy approximate bi-orthogonality with respect to a trial space of B-splines. The resulting mass matrix is ``close'' to the identity matrix. Specifically, a lumped version of this mass matrix preserves all relevant polynomials when utilized in a Galerkin projection. Consequently, the mass matrix can be lumped (via row-sum lum**) without compromising spatial accuracy in explicit dynamics calculations. We address the imposition of Dirichlet boundary conditions and the preservation of approximate bi-orthogonality under geometric map**s. In addition, we establish a link between the exact dual and approximate dual basis functions via an iterative algorithm that improves the approximate dual basis towards exact bi-orthogonality. We demonstrate the performance of our higher-order accurate mass lum** approach via convergence studies and spectral analyses of discretized beam, plate and shell models. △ Less

Submitted 4 July, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Journal ref: Computer Methods in Applied Mechanics and Engineering, Volume xxx, xxx 2023, 116233

A matrix-free macro-element variant of the hybridized discontinuous Galerkin method

Authors: Vahid Badrkhani, Rene R. Hiemstra, Michal Mika, Dominik Schillinger

Abstract: We investigate a macro-element variant of the hybridized discontinuous Galerkin (HDG) method, using patches of standard simplicial elements that can have non-matching interfaces. Coupled via the HDG technique, our method enables local refinement by uniform simplicial subdivision of each macro-element. By enforcing one spatial discretization for all macro-elements, we arrive at local problems per m… ▽ More We investigate a macro-element variant of the hybridized discontinuous Galerkin (HDG) method, using patches of standard simplicial elements that can have non-matching interfaces. Coupled via the HDG technique, our method enables local refinement by uniform simplicial subdivision of each macro-element. By enforcing one spatial discretization for all macro-elements, we arrive at local problems per macro-element that are embarrassingly parallel, yet well balanced. Therefore, our macro-element variant scales efficiently to n-node clusters and can be tailored to available hardware by adjusting the local problem size to the capacity of a single node, while still using moderate polynomial orders such as quadratics or cubics. Increasing the local problem size means simultaneously decreasing, in relative terms, the global problem size, hence effectively limiting the proliferation of degrees of freedom. The global problem is solved via a matrix-free iterative technique that also heavily relies on macro-element local operations. We investigate and discuss the advantages and limitations of the macro-element HDG method via an advection-diffusion model problem. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Variationally consistent mass scaling for explicit time-integration schemes of lower- and higher-order finite element methods

Authors: Stein K. F. Stoter, Thi-Hoa Nguyen, René R. Hiemstra, Dominik Schillinger

Abstract: In this paper, we propose a variationally consistent technique for decreasing the maximum eigenfrequencies of structural dynamics related finite element formulations. Our approach is based on adding a symmetric positive-definite term to the mass matrix that follows from the integral of the traction jump across element boundaries. The added term is weighted by a small factor, for which we derive a… ▽ More In this paper, we propose a variationally consistent technique for decreasing the maximum eigenfrequencies of structural dynamics related finite element formulations. Our approach is based on adding a symmetric positive-definite term to the mass matrix that follows from the integral of the traction jump across element boundaries. The added term is weighted by a small factor, for which we derive a suitable, and simple, element-local parameter choice. For linear problems, we show that our mass-scaling method produces no adverse effects in terms of spatial accuracy and orders of convergence. We illustrate these properties in one, two and three spatial dimension, for quadrilateral elements and triangular elements, and for up to fourth order polynomials basis functions. To extend the method to non-linear problems, we introduce a linear approximation and show that a sizeable increase in critical time-step size can be achieved while only causing minor (even beneficial) influences on the dynamic response. △ Less

Submitted 25 January, 2022; originally announced January 2022.

A variational approach based on perturbed eigenvalue analysis for improving spectral properties of isogeometric multipatch discretizations

Authors: Thi-Hoa Nguyen, René R. Hiemstra, Stein K. F. Stoter, Dominik Schillinger

Abstract: A key advantage of isogeometric discretizations is their accurate and well-behaved eigenfrequencies and eigenmodes. For degree two and higher, however, optical branches of spurious outlier frequencies and modes may appear due to boundaries or reduced continuity at patch interfaces. In this paper, we introduce a variational approach based on perturbed eigenvalue analysis that eliminates outlier fre… ▽ More A key advantage of isogeometric discretizations is their accurate and well-behaved eigenfrequencies and eigenmodes. For degree two and higher, however, optical branches of spurious outlier frequencies and modes may appear due to boundaries or reduced continuity at patch interfaces. In this paper, we introduce a variational approach based on perturbed eigenvalue analysis that eliminates outlier frequencies without negatively affecting the accuracy in the remainder of the spectrum and modes. We then propose a pragmatic iterative procedure that estimates the perturbation parameters in such a way that the outlier frequencies are effectively reduced. We demonstrate that our approach allows for a much larger critical time-step size in explicit dynamics calculations. In addition, we show that the critical time-step size obtained with the proposed approach does not depend on the polynomial degree of spline basis functions. △ Less

Submitted 14 February, 2022; v1 submitted 4 November, 2021; originally announced November 2021.

Leveraging spectral analysis to elucidate membrane locking and unlocking in isogeometric finite element formulations of the curved Euler-Bernoulli beam

Authors: Thi-Hoa Nguyen, René R. Hiemstra, Dominik Schillinger

Abstract: In this paper, we take a fresh look at using spectral analysis for assessing locking phenomena in finite element formulations. We propose to "measure" locking by comparing the difference between eigenvalue and mode error curves computed on coarse meshes with "asymptotic" error curves computed on "overkill" meshes, both plotted with respect to the normalized mode number. To demonstrate the intimate… ▽ More In this paper, we take a fresh look at using spectral analysis for assessing locking phenomena in finite element formulations. We propose to "measure" locking by comparing the difference between eigenvalue and mode error curves computed on coarse meshes with "asymptotic" error curves computed on "overkill" meshes, both plotted with respect to the normalized mode number. To demonstrate the intimate relation between membrane locking and spectral accuracy, we focus on the example of a circular ring discretized with isogeometric curved Euler-Bernoulli beam elements. We show that the transverse-displacement-dominating modes are locking-prone, while the circumferential-displacement-dominating modes are naturally locking-free. We use eigenvalue and mode errors to assess five isogeometric finite element formulations in terms of their locking-related efficiency: the displacement-based formulation with full and reduced integration and three locking-free formulations based on the B-bar, discrete strain gap and Hellinger-Reissner methods. Our study shows that spectral analysis uncovers locking-related effects across the spectrum of eigenvalues and eigenmodes, rigorously characterizing membrane locking in the displacement-based formulation and unlocking in the locking-free formulations. △ Less

Submitted 1 November, 2021; v1 submitted 6 June, 2021; originally announced June 2021.

A comparison of matrix-free isogeometric Galerkin and collocation methods for Karhunen--Loève expansion

Authors: Michal Lukasz Mika, René Rinke Hiemstra, Thomas Joseph Robert Hughes, Dominik Schillinger

Abstract: Numerical computation of the Karhunen--Loève expansion is computationally challenging in terms of both memory requirements and computing time. We compare two state-of-the-art methods that claim to efficiently solve for the K--L expansion: (1) the matrix-free isogeometric Galerkin method using interpolation based quadrature proposed by the authors in [1] and (2) our new matrix-free implementation o… ▽ More Numerical computation of the Karhunen--Loève expansion is computationally challenging in terms of both memory requirements and computing time. We compare two state-of-the-art methods that claim to efficiently solve for the K--L expansion: (1) the matrix-free isogeometric Galerkin method using interpolation based quadrature proposed by the authors in [1] and (2) our new matrix-free implementation of the isogeometric collocation method proposed in [2]. Two three-dimensional benchmark problems indicate that the Galerkin method performs significantly better for smooth covariance kernels, while the collocation method performs slightly better for rough covariance kernels. △ Less

Submitted 3 January, 2021; originally announced January 2021.

The Quad Layout Immersion: A Mathematically Equivalent Representation of a Surface Quadrilateral Layout

Authors: Kendrick M. Shepherd, René R. Hiemstra, Thomas J. R. Hughes

Abstract: Quadrilateral layouts on surfaces are valuable in texture map**, and essential in generation of quadrilateral meshes and in fitting splines. Previous work has characterized such layouts as a special metric on a surface or as a meromorphic quartic differential with finite trajectories. In this work, a surface quadrilateral layout is alternatively characterized as a special immersion of a cut repr… ▽ More Quadrilateral layouts on surfaces are valuable in texture map**, and essential in generation of quadrilateral meshes and in fitting splines. Previous work has characterized such layouts as a special metric on a surface or as a meromorphic quartic differential with finite trajectories. In this work, a surface quadrilateral layout is alternatively characterized as a special immersion of a cut representation of the surface into the Euclidean plane. We call this a quad layout immersion. This characterization, while posed in smooth topology, naturally generalizes to piecewise-linear representations. As such, it mathematically describes and generalizes integer grid maps, which are common in computer graphics settings. Finally, the utility of the representation is demonstrated by computationally extracting quadrilateral layouts on surfaces of interest. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Comments: 48 pages (31 for article, 17 for supplementary background material and appendices), 25 figures

MSC Class: 53-08; 53Z30; 57R15; 57Z20 ACM Class: I.3.5

A matrix-free isogeometric Galerkin method for Karhunen-Loève approximation of random fields using tensor product splines, tensor contraction and interpolation based quadrature

Authors: Michal Lukasz Mika, Thomas Joseph Robert Hughes, Dominik Schillinger, Peter Wriggers, René Rinke Hiemstra

Abstract: The Karhunen-Loève series expansion (KLE) decomposes a stochastic process into an infinite series of pairwise uncorrelated random variables and pairwise $L^2$-orthogonal functions. For any given truncation order of the infinite series the basis is optimal in the sense that the total mean squared error is minimized. The orthogonal basis functions are determined as the solution of an eigenvalue prob… ▽ More The Karhunen-Loève series expansion (KLE) decomposes a stochastic process into an infinite series of pairwise uncorrelated random variables and pairwise $L^2$-orthogonal functions. For any given truncation order of the infinite series the basis is optimal in the sense that the total mean squared error is minimized. The orthogonal basis functions are determined as the solution of an eigenvalue problem corresponding to the homogeneous Fredholm integral equation of the second kind, which is computationally challenging for several reasons. Firstly, a Galerkin discretization requires numerical integration over a $2d$ dimensional domain, where $d$, in this work, denotes the spatial dimension. Secondly, the main system matrix of the discretized weak-form is dense. Consequently, the computational complexity of classical finite element formation and assembly procedures as well as the memory requirements of direct solution techniques become quickly computationally intractable with increasing polynomial degree, number of elements and degrees of freedom. The objective of this work is to significantly reduce several of the computational bottlenecks associated with numerical solution of the KLE. We present a matrix-free solution strategy, which is embarrassingly parallel and scales favorably with problem size and polynomial degree. Our approach is based on (1) an interpolation based quadrature that minimizes the required number of quadrature points; (2) an inexpensive reformulation of the generalized eigenvalue problem into a standard eigenvalue problem; and (3) a matrix-free and parallel matrix-vector product for iterative eigenvalue solvers. Two higher-order three-dimensional benchmarks illustrate exceptional computational performance combined with high accuracy and robustness. △ Less

Submitted 21 February, 2021; v1 submitted 27 November, 2020; originally announced November 2020.

A Tchebycheffian extension of multi-degree B-splines: Algorithmic computation and properties

Authors: Rene R. Hiemstra, Thomas J. R. Hughes, Carla Manni, Hendrik Speleers, Deepesh Toshniwal

Abstract: In this paper we present an efficient and robust approach to compute a normalized B-spline-like basis for spline spaces with pieces drawn from extended Tchebycheff spaces. The extended Tchebycheff spaces and their dimensions are allowed to change from interval to interval. The approach works by constructing a matrix that maps a generalized Bernstein-like basis to the B-spline-like basis of interes… ▽ More In this paper we present an efficient and robust approach to compute a normalized B-spline-like basis for spline spaces with pieces drawn from extended Tchebycheff spaces. The extended Tchebycheff spaces and their dimensions are allowed to change from interval to interval. The approach works by constructing a matrix that maps a generalized Bernstein-like basis to the B-spline-like basis of interest. The B-spline-like basis shares many characterizing properties with classical univariate B-splines and may easily be incorporated in existing spline codes. This may contribute to the full exploitation of Tchebycheffian splines in applications, freeing them from the restricted role of an elegant theoretical extension of polynomial splines. Numerical examples are provided that illustrate the procedure described. △ Less

Submitted 22 January, 2020; originally announced January 2020.

MSC Class: 41A15; 41A50; 65D07; 65D15

High order gradient, curl and divergence conforming spaces, with an application to NURBS-based IsoGeometric Analysis

Authors: R. R. Hiemstra, R. H. M. Huijsmans, M. I. Gerritsma

Abstract: Conservation laws, in for example, electromagnetism, solid and fluid mechanics, allow an exact discrete representation in terms of line, surface and volume integrals. We develop high order interpolants, from any basis that is a partition of unity, that satisfy these integral relations exactly, at cell level. The resulting gradient, curl and divergence conforming spaces have the property that the c… ▽ More Conservation laws, in for example, electromagnetism, solid and fluid mechanics, allow an exact discrete representation in terms of line, surface and volume integrals. We develop high order interpolants, from any basis that is a partition of unity, that satisfy these integral relations exactly, at cell level. The resulting gradient, curl and divergence conforming spaces have the property that the conservation laws become completely independent of the basis functions. This means that the conservation laws are exactly satisfied even on curved meshes. As an example, we develop high order gradient, curl and divergence conforming spaces from NURBS - non uniform rational B-splines - and thereby generalize the compatible spaces of B-splines developed by Buffa et al.[1]. We give several examples of 2D Stokes flow calculations which result, amongst others, in a point wise divergence free velocity field. △ Less

Submitted 9 September, 2012; originally announced September 2012.

Comments: submitted to Journal of Computational Physics

MSC Class: 65Z05; 65M60; 76D07