-
Transition-state-theory-based interpretation of Landau double well potential for ferroelectrics
Authors:
Md Nur K. Alam,
S. Clima,
B. Kaczer,
Ph. Roussel,
B. Truijen,
L. - A. Ragnarsson,
N. Horiguchi,
M. Heyns,
J. Van Houdt
Abstract:
Existence of quasi-static negative capacitance (QSNC) was proposed from an interpretation of the widely accepted Landau model of ferroelectrics. However, many works showed not to support the QSNC theory, making it controversial. In this letter we show the Landau model when used together with transition-state-theory, can connect various models including first-principles, Landau, Preisach and nuclea…
▽ More
Existence of quasi-static negative capacitance (QSNC) was proposed from an interpretation of the widely accepted Landau model of ferroelectrics. However, many works showed not to support the QSNC theory, making it controversial. In this letter we show the Landau model when used together with transition-state-theory, can connect various models including first-principles, Landau, Preisach and nucleation limited switching while it does not predict the existence of QSNC.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Auroral, Ionospheric and Ground Magnetic Signatures of Magnetopause Surface Modes
Authors:
M. O. Archer,
M. D. Hartinger,
L. Rastaetter,
D. J. Southwood,
M. Heyns,
J. W. B. Eggington,
A. N. Wright,
F. Plaschke,
X. Shi
Abstract:
Surface waves on Earth's magnetopause have a controlling effect upon global magnetospheric dynamics. Since spacecraft provide sparse in situ observation points, remote sensing these modes using ground-based instruments in the polar regions is desirable. However, many open conceptual questions on the expected signatures remain. Therefore, we provide predictions of key qualitative features expected…
▽ More
Surface waves on Earth's magnetopause have a controlling effect upon global magnetospheric dynamics. Since spacecraft provide sparse in situ observation points, remote sensing these modes using ground-based instruments in the polar regions is desirable. However, many open conceptual questions on the expected signatures remain. Therefore, we provide predictions of key qualitative features expected in auroral, ionospheric, and ground magnetic observations through both magnetohydrodynamic theory and a global coupled magnetosphere-ionosphere simulation of a magnetopause surface eigenmode. These show monochromatic oscillatory field-aligned currents, due to both the surface mode and its non-resonant Alfvén coupling, are present throughout the magnetosphere. The currents peak in amplitude at the equatorward edge of the magnetopause boundary layer, not the open-closed boundary as previously thought. They also exhibit slow poleward phase motion rather than being purely evanescent. We suggest the upward field-aligned current perturbations may result in periodic auroral brightenings. In the ionosphere, convection vortices circulate the poleward moving field-aligned current structures. Finally, surface mode signals are predicted in the ground magnetic field, with ionospheric Hall currents rotating perturbations by approximately (but not exactly) 90° compared to the magnetosphere. Thus typical dayside magnetopause surface modes should be strongest in the East-West ground magnetic field component. Overall, all ground-based signatures of the magnetopause surface mode are predicted to have the same frequency across L-shells, amplitudes that maximise near the magnetopause's equatorward edge, and larger latitudinal scales than for field line resonance. Implications in terms of ionospheric Joule heating and geomagnetically induced currents are discussed.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Adaptations to a geomagnetic field interpolation method in Southern Africa
Authors:
M. J. Heyns,
S. I. Lotz,
P. J. Cilliers,
C. T. Gaunt
Abstract:
Space weather and its impact on infrastructure presents a clear risk in the modern era, as evidenced by the adverse effects of geomagnetically induced currents (GICs) in power networks. To model GICs, ground-based geomagnetic field (B-field) measurements are critical and need to be available in the region of interest. A challenge globally lies in the sparse distribution of magnetometer arrays, whi…
▽ More
Space weather and its impact on infrastructure presents a clear risk in the modern era, as evidenced by the adverse effects of geomagnetically induced currents (GICs) in power networks. To model GICs, ground-based geomagnetic field (B-field) measurements are critical and need to be available in the region of interest. A challenge globally lies in the sparse distribution of magnetometer arrays, which are seldom located near critical power network nodes. Interpolation of the geomagnetic field (B-field) is often needed, with the spherical elementary current system (SECS) approach developed for high-latitude regions favoured. We adapt this interpolation scheme to include low-cost variometers to interpolate dB/dt directly and increase interpolation accuracy. A further adaptation to the scheme is to physically represent the mid-latitude context where most power networks and pipelines lie. The driving current systems in these regions differ from their high-latitude counterparts. Using a physics-consistent mid-latitude version of SECS, we show why previous implementations in Southern Africa are incorrect but still result in useful interpolation. The scope of these adaptations not only has direct application to research in general, but also to utilities, where effective low-cost instrumentation can be used to improve GIC modelling accuracy.
△ Less
Submitted 8 March, 2022;
originally announced March 2022.
-
Path toward manufacturable superconducting qubits with relaxation times exceeding 0.1 ms
Authors:
J. Verjauw,
R. Acharya,
J. Van Damme,
Ts. Ivanov,
D. Perez Lozano,
F. A. Mohiyaddin,
D. Wan,
J. Jussot,
A. M. Vadiraj,
M. Mongillo,
M. Heyns,
I. Radu,
B. Govoreanu,
A. Potočnik
Abstract:
As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and li…
▽ More
As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and lift-off techniques used for current, state-of-the art superconducting qubits are generally incompatible with modern day manufacturable processes. Here, we demonstrate a fully CMOS compatible qubit fabrication method, and show results from overlap Josephson junction devices with long coherence and relaxation times, on par with the state-of-the-art. We experimentally verify that Argon milling - the critical step during junction fabrication - and a subtractive etch process nevertheless result in qubits with average qubit energy relaxation times T1 reaching 70 $μ$s, with maximum values exceeding 100 $μ$s. Furthermore, we show that our results are still limited by surface losses and not, crucially, by junction losses. The presented fabrication process therefore heralds an important milestone towards a manufacturable 300 mm CMOS process for high-coherence superconducting qubits and has the potential to advance the scaling of superconducting device architectures.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Uniform Spin Qubit Devices in an All-Silicon 300 mm Integrated Process
Authors:
N. I. Dumoulin Stuyck,
R. Li,
C. Godfrin,
A. Elsayed,
S. Kubicek,
J. Jussot,
B. T. Chan,
F. A. Mohiyaddin,
M. Shehata,
G. Simion,
Y. Canvel,
L. Goux,
M. Heyns,
B. Govoreanu,
I. P. Radu
Abstract:
Larger arrays of electron spin qubits require radical improvements in fabrication and device uniformity. Here we demonstrate excellent qubit device uniformity and tunability from 300K down to mK temperatures. This is achieved, for the first time, by integrating an overlap** polycrystalline silicon-based gate stack in an 'all-Silicon' and lithographically flexible 300mm flow. Low-disorder Si/SiO…
▽ More
Larger arrays of electron spin qubits require radical improvements in fabrication and device uniformity. Here we demonstrate excellent qubit device uniformity and tunability from 300K down to mK temperatures. This is achieved, for the first time, by integrating an overlap** polycrystalline silicon-based gate stack in an 'all-Silicon' and lithographically flexible 300mm flow. Low-disorder Si/SiO$_2$ is proved by a 10K Hall mobility of $1.5 \cdot 10^4$ $cm^2$/Vs. Well-controlled sensors with low charge noise (3.6 $μ$eV/$\sqrt{\mathrm{Hz}}$ at 1 Hz) are used for charge sensing down to the last electron. We demonstrate excellent and reproducible interdot coupling control over nearly 2 decades (2-100 GHz). We show spin manipulation and single-shot spin readout, extracting a valley splitting energy of around 150 $μ$eV. These low-disorder, uniform qubit devices and 300mm fab integration pave the way for fast scale-up to large quantum processors.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Low dephasing and robust micromagnet designs for silicon spin qubits
Authors:
N. I. Dumoulin Stuyck,
F. A. Mohiyaddin,
R. Li,
M. Heyns,
B. Govoreanu,
I. P. Radu
Abstract:
Using micromagnets to enable electron spin manipulation in silicon qubits has emerged as a very popular method, enabling single-qubit gate fidelities larger than 99:9%. However, these micromagnets also apply stray magnetic field gradients onto the qubits, making the spin states susceptible to electric field noise and limiting their coherence times. We describe here a magnet design that minimizes q…
▽ More
Using micromagnets to enable electron spin manipulation in silicon qubits has emerged as a very popular method, enabling single-qubit gate fidelities larger than 99:9%. However, these micromagnets also apply stray magnetic field gradients onto the qubits, making the spin states susceptible to electric field noise and limiting their coherence times. We describe here a magnet design that minimizes qubit dephasing, while allowing for fast qubit control and addressability. Specifically, we design and optimize magnet dimensions and position relative to the quantum dots, minimizing dephasing from magnetic field gradients. The micromagnet-induced dephasing rates with this design are up to 3-orders of magnitude lower than state-of-the-art implementations, allowing for long coherence times. This design is robust against fabrication errors, and can be combined with a wide variety of silicon qubit device geometries, thereby allowing exploration of coherence limiting factors and novel upscaling approaches.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
First experimental demonstration of a scalable linear majority gate based on spin waves
Authors:
Florin Ciubotaru,
Giacomo Talmelli,
Thibaut Devolder,
Odysseas Zografos,
Marc Heyns,
Christoph Adelmann,
Iuliana P. Radu
Abstract:
We report on the first experimental demonstration of majority logic operation using spin waves in a scaled device with an in-line input and output layout. The device operation is based on the interference of spin waves generated and detected by inductive antennas in an all-electrical microwave circuit. We demonstrate the full truth table of a majority logic function with the ability to distinguish…
▽ More
We report on the first experimental demonstration of majority logic operation using spin waves in a scaled device with an in-line input and output layout. The device operation is based on the interference of spin waves generated and detected by inductive antennas in an all-electrical microwave circuit. We demonstrate the full truth table of a majority logic function with the ability to distinguish between strong and weak majority, as well as an inverted majority function by adjusting the operation frequency. Circuit performance projections predict low energy consumption of spin wave based compared to CMOS for large arithmetic circuits.
△ Less
Submitted 21 June, 2021;
originally announced June 2021.
-
Electrical spin-wave spectroscopy in nanoscale waveguides with nonuniform magnetization
Authors:
Giacomo Talmelli,
Daniele Narducci,
Frederic Vanderveken,
Marc Heyns,
Fernanda Irrera,
Inge Asselberghs,
Iuliana P. Radu,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias fie…
▽ More
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias field led to several distinct bands, corresponding to different quantized width modes, with both negative and positive slopes. Micromagnetic simulations showed that, in this geometry, the magnetization was nonuniform and tilted due to the strong shape anisotropy of the waveguides. Simulations of the quantized spin-wave modes in such nonuniformly magnetized waveguides resulted in spin wave dispersion relations in good agreement with the experiments.
△ Less
Submitted 27 April, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
Investigation of microwave loss induced by oxide regrowth in high-Q Nb resonators
Authors:
J. Verjauw,
A. Potočnik,
M. Mongillo,
R. Acharya,
F. Mohiyaddin,
G. Simion,
A. Pacco,
Ts. Ivanov,
D. Wan,
A. Vanleenhove,
L. Souriau,
J. Jussot,
A. Thiam,
J. Swerts,
X. Piao,
S. Couet,
M. Heyns,
B. Govoreanu,
I. Radu
Abstract:
The coherence of state-of-the-art superconducting qubit devices is predominantly limited by two-level-system defects, found primarily at amorphous interface layers. Reducing microwave loss from these interfaces by proper surface treatments is key to push the device performance forward. Here, we study niobium resonators after removing the native oxides with a hydrofluoric acid etch. We investigate…
▽ More
The coherence of state-of-the-art superconducting qubit devices is predominantly limited by two-level-system defects, found primarily at amorphous interface layers. Reducing microwave loss from these interfaces by proper surface treatments is key to push the device performance forward. Here, we study niobium resonators after removing the native oxides with a hydrofluoric acid etch. We investigate the reappearance of microwave losses introduced by surface oxides that grow after exposure to the ambient environment. We find that losses in quantum devices are reduced by an order of magnitude, with internal Q-factors reaching up to 7 $\cdot$ 10$^6$ in the single photon regime, when devices are exposed to ambient conditions for 16 min. Furthermore, we observe that Nb2O5 is the only surface oxide that grows significantly within the first 200 hours, following the extended Cabrera-Mott growth model. In this time, microwave losses scale linearly with the Nb$_2$O$_5$ thickness, with an extracted loss tangent tan$δ$ = 9.9 $\cdot$ 10$^{-3}$. Our findings are of particular interest for devices spanning from superconducting qubits, quantum-limited amplifiers, microwave kinetic inductance detectors to single photon detectors.
△ Less
Submitted 22 December, 2020; v1 submitted 19 December, 2020;
originally announced December 2020.
-
Epitaxy of new layered materials: 2D chalcogenides and challenges of weak van der Waals interactions
Authors:
Wouter Mortelmans,
Stefan De Gendt,
Marc Heyns,
Clement Merckling
Abstract:
The application of new materials in nanotechnology opens new perspectives and enables ground-breaking innovations. Two-dimensional van der Waals materials and more specific, 2D chalcogenides are a promising class of new materials awaiting their usage in the semiconductor industry. However, the integration of van der Waals materials relying on industry-compatible manufacturing processes is still a…
▽ More
The application of new materials in nanotechnology opens new perspectives and enables ground-breaking innovations. Two-dimensional van der Waals materials and more specific, 2D chalcogenides are a promising class of new materials awaiting their usage in the semiconductor industry. However, the integration of van der Waals materials relying on industry-compatible manufacturing processes is still a major challenge. This is currently restricting the application of these new materials to the research laboratories environment only. The large-area and single-crystalline growth of van der Waals materials is one of the most important requirements to meet the challenging demands implied by the semiconductor industry. This review contributes to a more generalized understanding on the integration of van der Waals materials - and in more specific 2D chalcogenides - through the growth process of epitaxy. This, can pursue further the aspiration of large-area, single-crystalline and defect-free epitaxial integration of (quasi) van der Waals homo- and heterostructures into the great world of the semiconductor industry.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Towards twin-free molecular beam epitaxy of 2D chalcogenides explained by stronger interlayer van der Waals coupling
Authors:
Wouter Mortelmans,
Karel De Smet,
Ruishen Meng,
Michel Houssa,
Stefan De Gendt,
Marc Heyns,
Clement Merckling
Abstract:
Defect-free epitaxial growth of 2D materials is one of the holy grails for a successful integration of van der Waals (vdW) materials in the semiconductor industry. The large-area (quasi-)vdW epitaxy of layered 2D chalcogenides is consequently carefully being researched since these materials hold very promising properties for future nanoelectronic applications. The formation of defects such as stac…
▽ More
Defect-free epitaxial growth of 2D materials is one of the holy grails for a successful integration of van der Waals (vdW) materials in the semiconductor industry. The large-area (quasi-)vdW epitaxy of layered 2D chalcogenides is consequently carefully being researched since these materials hold very promising properties for future nanoelectronic applications. The formation of defects such as stacking faults like 60o twins and consequently 60o grain boundaries is still of major concern for the defect-free epitaxial growth of 2D chalcogenides. Although growth strategies to overcome the occurrence of these defects are currently being considered, more fundamental understanding on the origin of these defects at the initial stages of the growth is highly essential. Therefore this work focuses on the understanding of 60o twin formation in (quasi-)vdW epitaxy of 2D chalcogenides relying on systematic molecular beam epitaxy (MBE) experiments supported by density functional theory (DFT) calculations. The MBE experiments reveal the striking difference in 60o twin formation between WSe2 and Bi2Se3 in both quasi-vdW heteroepitaxy and vdW homoepitaxy, which from our DFT calculations links to the difference in interlayer vdW coupling strength. The stronger interlayer vdW coupling in Bi2Se3 compared to WSe2 results in a striking enhanced control on twin formation and hence shows significantly more promise for defect-free epitaxial integration. This interesting aspect of (quasi-)vdW epitaxy reveals that the strength of interlayer vdW coupling is key for functional 2D materials and opens perspectives for other vdW materials sharing strong interlayer interactions.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Probabilistic Analysis of Power Network Susceptibility to GICs
Authors:
M. J. Heyns,
S. I. Lotz,
C. T. Gaunt
Abstract:
As reliance on power networks has increased over the last century, the risk of damage from geomagnetically induced currents (GICs) has become a concern to utilities. The current state of the art in GIC modelling requires significant geophysical modelling and a theoretically derived network response, but has limited empirical validation. In this work, we introduce a probabilistic engineering step b…
▽ More
As reliance on power networks has increased over the last century, the risk of damage from geomagnetically induced currents (GICs) has become a concern to utilities. The current state of the art in GIC modelling requires significant geophysical modelling and a theoretically derived network response, but has limited empirical validation. In this work, we introduce a probabilistic engineering step between the measured geomagnetic field and GICs, without needing data about the power system topology or the ground conductivity profiles. The resulting empirical ensembles are used to analyse the TVA network (south-eastern USA) in terms of peak and cumulative exposure to 5 moderate to intense geomagnetic storms. Multiple nodes are ranked according to susceptibility and the measured response of the total TVA network is further calibrated to existing extreme value models. The probabilistic engineering step presented can complement present approaches, being particularly useful for risk assessment of existing transformers and power systems.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Data Driven Transfer Functions and Transmission Network Parameters for GIC Modelling
Authors:
M. J. Heyns,
C. T. Gaunt,
S. I. Lotz,
P. J. Cilliers
Abstract:
Typical geomagnetically induced current (GIC) modelling assumes the induced quasi-DC current at a node in the transmission network is linearly related to the local geoelectric field by a pair of network parameters. Given a limited time-series of measured geomagnetic and GIC data, an empirical method is presented that results in a statistically significant generalised ensemble of parameter estimate…
▽ More
Typical geomagnetically induced current (GIC) modelling assumes the induced quasi-DC current at a node in the transmission network is linearly related to the local geoelectric field by a pair of network parameters. Given a limited time-series of measured geomagnetic and GIC data, an empirical method is presented that results in a statistically significant generalised ensemble of parameter estimates with the error in the estimates identified. The method is showcased for different transmission networks and geomagnetic storms and, where prior modelling exists, shows improved GIC estimation. Furthermore, modelled networks can be locally characterised and probed without any further network knowledge. Insights include network parameter variation, effective network directionality and response. Merging the network parameters and geoelectric field estimation, a transfer function is derived which offers an alternative approach to assessing transformer exposure to GICs.
△ Less
Submitted 22 June, 2020; v1 submitted 19 April, 2020;
originally announced April 2020.
-
Frequency Components of Geomagnetically Induced Currents for Power System Modelling
Authors:
D. T. O. Oyedokun,
M. J. Heyns,
P. J. Cilliers,
C. T. Gaunt
Abstract:
Geomagnetically induced currents (GICs) in power systems are conventionally modelled as direct currents, based on their commonly described quasi-DC nature. For more representative power system dynamic response modelling, it is necessary to model GICs using low-frequency AC. After analysing spectra of geomagnetic field measurements and GICs in several power systems, preliminary results indicate tha…
▽ More
Geomagnetically induced currents (GICs) in power systems are conventionally modelled as direct currents, based on their commonly described quasi-DC nature. For more representative power system dynamic response modelling, it is necessary to model GICs using low-frequency AC. After analysing spectra of geomagnetic field measurements and GICs in several power systems, preliminary results indicate that the GIC spectra depend on the magnitude and frequency spectrum of the geomagnetic disturbance, the earth conductivity and the electrical characteristics of the network. In this paper, analysis based on measured GIC power spectra suggests that the dominant frequencies to use in GIC modelling and simulation are typically below 50 mHz. The associated error introduced by only using these frequencies is also quantified. The results have implications for modelling the geoelectric fields inducing GICs, dynamic models of power system response and the need for GICs and their associated driving fields to be measured at intervals not exceeding 10 s.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
dSECS: Including Variometers in Geomagnetic Field Interpolation
Authors:
M. J. Heyns,
S. I. Lotz,
C. T. Gaunt
Abstract:
One of the best tools we have in geophysical modelling is the ability to interpolate the horizontal geomagnetic field at the surface of the Earth. This is especially useful in regions, such as southern Africa, where there is a sparse array of absolute magnetometers available for geomagnetic field measurements. In terms of geomagnetic field interpolation, the spherical elementary current systems (S…
▽ More
One of the best tools we have in geophysical modelling is the ability to interpolate the horizontal geomagnetic field at the surface of the Earth. This is especially useful in regions, such as southern Africa, where there is a sparse array of absolute magnetometers available for geomagnetic field measurements. In terms of geomagnetic field interpolation, the spherical elementary current systems (SECS) spatial interpolation scheme has shown to be very successful, and the planar approximation of this method adequate for modelling at mid-latitudes. The SECS interpolation scheme is physics based, making use of the Biot-Savart law and equivalent ionospheric currents to interpolate measured geomagnetic field data. As with most interpolation methods, more data points result in lower error. Therefore, we adapt the SECS method to work with variometers. These instruments measure variations in magnetic field and are more abundant in southern Africa. Merging the two resulting interpolated datasets, the initial absolute geomagnetic field interpolation can be significantly improved. This improved interpolation scheme is not only incredibly useful locally, where a sparse magnetometer array is a challenge, but can also be applied just as effectively in other cases across the globe where there are numerous magnetometers and variometers available.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Ensemble Estimation of Network Parameters: A Tool to Improve the Real-time Estimation of GICs in the South African Power Network
Authors:
M. J. Heyns,
S. I. Lotz,
P. J. Cilliers,
C. T. Gaunt
Abstract:
It has long been known that large grounded conducting networks on the surface of Earth are affected by solar activity and geomagnetic storms. Power networks are such extensive grounded conductors and are susceptible to geomagnetically induced currents (GICs). GICs at any specific node in a power network are assumed to be linearly related to the horizontal vector components of an induced plane-wave…
▽ More
It has long been known that large grounded conducting networks on the surface of Earth are affected by solar activity and geomagnetic storms. Power networks are such extensive grounded conductors and are susceptible to geomagnetically induced currents (GICs). GICs at any specific node in a power network are assumed to be linearly related to the horizontal vector components of an induced plane-wave geoelectric field by a pair of network parameters. These network parameters are not easily measured in the network, but may be estimated empirically. In this work, we present a new approach of using an ensemble of network parameters estimates. The ensembles include a huge number of parameter pair estimates calculated from simultaneously solving pairs of time instances of the governing GIC equation. Each individual estimate is not the true state of the system, but a possible state. Taking the ensemble as a whole though gives the most probable parameter estimate. The most probable parameter estimate for both network parameters, as defined by their respective ensembles, is used directly in the modelling of GICs. The ensembles themselves however allow for further analysis into the nature of GICs. An improvement is seen when comparing the out-of-sample performance of the ensemble estimates with previous GIC modelling in the South African power network during the Halloween Storm of 2003. For the first time, it is shown that errors in the GIC modelling chain are absorbed into the network parameter estimates. Using a range of estimates from the ensemble, a GIC prediction band is produced. This band corresponds to an error estimate for predicted GIC. Furthermore, it has been explicitly shown that estimated network parameters vary with GIC magnitude during an event. This behaviour is then used to refine the parameter estimation further and allow for real time dynamic network parameter estimation.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Reconfigurable sub-micron spin-wave majority gate with electrical transducers
Authors:
Giacomo Talmelli,
Thibaut Devolder,
Nick Träger,
Johannes Förster,
Sebastian Wintz,
Markus Weigand,
Hermann Stoll,
Marc Heyns,
Gisela Schütz,
Iuliana Radu,
Joachim Gräfe,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics…
▽ More
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics is still lacking. Here, we demonstrate a sub-micron inline spin-wave majority gate with fan-out. Time-resolved imaging of the magnetization dynamics by scanning transmission x-ray microscopy illustrates the device operation. All-electrical spin-wave spectroscopy further demonstrates majority gates with sub-micron dimensions, reconfigurable input and output ports, and frequency-division multiplexing. Challenges for hybrid spintronic computing systems based on spin-wave majority gates are discussed.
△ Less
Submitted 3 September, 2021; v1 submitted 7 August, 2019;
originally announced August 2019.
-
Excitation and propagation of spin waves in non-uniformly magnetized waveguides
Authors:
Frederic Vanderveken,
Hasnain Ahmad,
Marc Heyns,
Bart Sorée,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
The characteristics of spin waves in ferromagnetic waveguides with nonuniform magnetization have been investigated for situations where the shape anisotropy field of the waveguide is comparable to the external bias field. Spin-wave generation was realized by the magnetoelastic effect by applying normal and shear strain components, as well as by the Oersted field emitted by an inductive antenna. Th…
▽ More
The characteristics of spin waves in ferromagnetic waveguides with nonuniform magnetization have been investigated for situations where the shape anisotropy field of the waveguide is comparable to the external bias field. Spin-wave generation was realized by the magnetoelastic effect by applying normal and shear strain components, as well as by the Oersted field emitted by an inductive antenna. The magnetoelastic excitation field has a nonuniform profile over the width of the waveguide because of the nonuniform magnetization orientation, whereas the Oersted field remains uniform. Using micromagnetic simulations, we indicate that both types of excitation fields generate quantised width modes with both odd and even mode numbers as well as tilted phase fronts. We demonstrate that these effects originate from the average magnetization orientation with respect to the main axes of the magnetic waveguide. Furthermore, it is indicated that the excitation efficiency of the second-order mode generally surpasses that of the first-order mode due to their symmetry. The relative intensity of the excited modes can be controlled by the strain state as well as by tuning the dimensions of the excitation area. Finally, we demonstrate that the nonreciprocity of spin-wave radiation due to the chirality of an Oersted field generated by an inductive antenna is absent for magnetoelastic spin-wave excitation.
△ Less
Submitted 21 June, 2021; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Spin wave emission by spin-orbit torque antennas
Authors:
Giacomo Talmelli,
Florin Ciubotaru,
Kevin Garello,
Xiao Sun,
Marc Heyns,
Iuliana P. Radu,
Christoph Adelmann,
Thibaut Devolder
Abstract:
We study the generation of propagating spin waves in Ta/CoFeB waveguides by spin-orbit torque antennas and compare them to conventional inductive antennas. The spin-orbit torque was generated by a transverse microwave current across the magnetic waveguide. The detected spin wave signals for an in-plane magnetization across the waveguide (Damon-Eshbach configuration) exhibited the expected phase ro…
▽ More
We study the generation of propagating spin waves in Ta/CoFeB waveguides by spin-orbit torque antennas and compare them to conventional inductive antennas. The spin-orbit torque was generated by a transverse microwave current across the magnetic waveguide. The detected spin wave signals for an in-plane magnetization across the waveguide (Damon-Eshbach configuration) exhibited the expected phase rotation and amplitude decay upon propagation when the current spreading was taken into account. Wavevectors up to about 6 rad/$μ$m could be excited by the spin-orbit torque antennas despite the current spreading, presumably due to the non-uniformity of the microwave current. The relative magnitude of generated anti-dam** spin-Hall and Oersted fields was calculated within an analytic model and it was found that they contribute approximately equally to the total effective field generated by the spin-orbit torque antenna. Due to the ellipticity of the precession in the ultrathin waveguide and the different orientation of the anti-dam** spin-Hall and Oersted fields, the torque was however still dominated by the Oersted field. The prospects for obtaining a pure spin-orbit torque response are discussed, as are the energy efficiency and the scaling properties of spin-orbit torque antennas.
△ Less
Submitted 8 February, 2018; v1 submitted 2 February, 2018;
originally announced February 2018.
-
Strain coupling optimization in magnetoelectric transducers
Authors:
Davide Tierno,
Florin Ciubotaru,
Rutger Duflou,
Marc Heyns,
Iuliana P. Radu,
Christoph Adelmann
Abstract:
The mechanical behavior of magnetoelectric transducers consisting of piezoelectric-magnetostrictive bilayers has been modeled. The effect of the aspect ratio of the transducer as well as the influence of non-active surrounding layers has been modeled, including a passivation layer surrounding the active device, a clam** layer above the active device, and an interfacial layer that might be insert…
▽ More
The mechanical behavior of magnetoelectric transducers consisting of piezoelectric-magnetostrictive bilayers has been modeled. The effect of the aspect ratio of the transducer as well as the influence of non-active surrounding layers has been modeled, including a passivation layer surrounding the active device, a clam** layer above the active device, and an interfacial layer that might be inserted between the magnetostrictive and the piezoelectric layers. Strategies to control and maximize the strain magnitude and orientation based on material selection and device design are proposed.
△ Less
Submitted 16 October, 2017;
originally announced December 2017.
-
Micromagnetic simulations of magnetoelastic spin wave excitation in scaled magnetic waveguides
Authors:
Rutger Duflou,
Florin Ciubotaru,
Adrien Vaysset,
Marc Heyns,
Bart Soree,
Iuliana P. Radu,
Christoph Adelmann
Abstract:
We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to t…
▽ More
We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to the effect of the demagnetizing field leads to the excitation of spin waves for oscillating normal strains both parallel and perpendicular to the magnetization. The excitation by biaxial normal in-plane strain was found to be much more efficient than by uniaxial normal out-of-plane strain. For narrow waveguides with widths of 200\,nm, the excitation efficiency of biaxial normal in-plane strain was comparable to that of shear strain.
△ Less
Submitted 21 August, 2017;
originally announced August 2017.
