-
Collapse of columns of granular rods
Authors:
Claus Heussinger
Abstract:
Simulation results are presented on the collapse of granular columns composed of rod-like particles. Columns can be stable and free-standing if either the friction coefficient is large enough, or the rods long enough. Destabilizing gravitational forces are counteracted by increased frictional forces between the rods. Different to columns made of spherical particles this is possible, because rod co…
▽ More
Simulation results are presented on the collapse of granular columns composed of rod-like particles. Columns can be stable and free-standing if either the friction coefficient is large enough, or the rods long enough. Destabilizing gravitational forces are counteracted by increased frictional forces between the rods. Different to columns made of spherical particles this is possible, because rod contacts can slide along the rod axes to generate the necessary "frictional cohesion".
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Start-up shear of spherocylinder packings: effect of friction
Authors:
Claus Heussinger
Abstract:
We study the response to shear deformations of packings of long spherocylindrical particles that interact via frictional forces with friction coefficient $μ$. The packings are produced and deformed with the help of molecular dynamics simulations combined with minimization techniques performed on a GPU. We calculate the linear shear modulus $g_\infty$, which is orders of magnitude larger than the m…
▽ More
We study the response to shear deformations of packings of long spherocylindrical particles that interact via frictional forces with friction coefficient $μ$. The packings are produced and deformed with the help of molecular dynamics simulations combined with minimization techniques performed on a GPU. We calculate the linear shear modulus $g_\infty$, which is orders of magnitude larger than the modulus $g_0$ in the corresponding frictionless system. The motion of the particles responsible for these large frictional forces is governed by and increases with the length $\ell$ of the spherocylinders. One consequence of this motion is that the shear modulus $g_\infty$ approaches a finite value in the limit $\ell\to\infty$, even though the density of the packings vanishes, $ρ\propto\ell^{-2}$. By way of contrast, the frictionless modulus decreases to zero, $g_0\sim\ell^{-2}$, in accordance with the behavior of density. Increasing the strain beyond a value $γ_c\sim μ$, the packing undergoes a "shear-thinning" transition from the large frictional to the smaller frictionless modulus when contacts saturate at the Coulomb inequality and start to slide. In this regime, sliding friction contributes a "yield stress" $σ_y=g_\inftyγ_c$ and the stress behaves as $σ=σ_y+g_0γ$. The interplay between static and sliding friction gives rise to hysteresis in oscillatory shear simulations.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Packings of frictionless spherocylinders
Authors:
Claus Heussinger
Abstract:
We present simulation results on the properties of packings of frictionless spherocylindrical particles. Starting from a random distribution of particles in space, a packing is produced by minimizing the potential energy of inter-particle contacts until a force-equilibrated state is reached. For different particle aspect ratios $α=10\ldots 40$, we calculate contacts $z$, pressure as well as bulk a…
▽ More
We present simulation results on the properties of packings of frictionless spherocylindrical particles. Starting from a random distribution of particles in space, a packing is produced by minimizing the potential energy of inter-particle contacts until a force-equilibrated state is reached. For different particle aspect ratios $α=10\ldots 40$, we calculate contacts $z$, pressure as well as bulk and shear modulus. Most important is the fraction $f_0$ of spherocylinders with contacts at both ends as it governs the jamming threshold $z_c(f_0)=8+2f_0$. These results highlight the important role of the axial "sliding" degree of freedom of a spherocylinder, which is a zero-energy mode but only if no end-contacts are present.
△ Less
Submitted 6 August, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
Unsteady flow, clusters and bands in a model shear-thickening fluid
Authors:
Shibu Saw,
Mathias Grob,
Annette Zippelius,
Claus Heussinger
Abstract:
We analyse the flow curves of a two-dimensional assembly of granular particles which are interacting via frictional contact forces. For packing fractions slightly below jamming, the fluid undergoes a large scale instability, implying a range of stress and strainrates where no stationary flow can exist. Whereas small systems were shown previously to exhibit hysteretic jumps between the low and high…
▽ More
We analyse the flow curves of a two-dimensional assembly of granular particles which are interacting via frictional contact forces. For packing fractions slightly below jamming, the fluid undergoes a large scale instability, implying a range of stress and strainrates where no stationary flow can exist. Whereas small systems were shown previously to exhibit hysteretic jumps between the low and high stress branches, large systems exhibit continuous shear thickening arising from averaging unsteady, spatially heterogeneous flows. The observed large scale patterns as well as their dynamics are found to depend on strainrate: At the lower end of the unstable region, force chains merge to form giant bands that span the system in compressional direction and propagate in dilational direction. At the upper end, we observe large scale clusters which extend along the dilational direction and propagate along the compressional direction. Both patterns, bands and clusters, come in with infinite correlation length similar to the sudden onset of system-spanning plugs in impact experiments.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Rheology in dense assemblies of spherocylinders: frictional vs. frictionless
Authors:
Trisha Nath,
Claus Heussinger
Abstract:
Using molecular dynamics simulations, we study the steady shear flow of dense assemblies of anisotropic spherocylindrical particles of varying aspect ratios. Comparing frictionless and frictional particles we discuss the specific role of frictional inter-particle forces for the rheological properties of the system. In the frictional system we evidence a shear-thickening regime, similar to that for…
▽ More
Using molecular dynamics simulations, we study the steady shear flow of dense assemblies of anisotropic spherocylindrical particles of varying aspect ratios. Comparing frictionless and frictional particles we discuss the specific role of frictional inter-particle forces for the rheological properties of the system. In the frictional system we evidence a shear-thickening regime, similar to that for spherical particles. Furthermore, friction suppresses alignment of the spherocylinders along the flow direction. Finally, the jamming density in frictional systems is rather insensitive to variations in aspect-ratio, quite contrary to what is known from frictionless systems.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Discontinuous shear-thinning in adhesive dispersions
Authors:
Ehsan Irani,
Pinaki Chaudhuri,
Claus Heussinger
Abstract:
We present simulations for the steady-shear rheology of a model adhesive dispersion. We vary the range of the attractive forces $u$ as well as the strength of the dissipation $b$. For large dissipative forces, the rheology is governed by the Weisenberg number $ \text{Wi}\sim b\dotγ/u$ and displays Herschel-Bulkley form $σ= σ_y+c\text{Wi}^ν$ with exponent $ν=0.45$. Decreasing the strength of dissip…
▽ More
We present simulations for the steady-shear rheology of a model adhesive dispersion. We vary the range of the attractive forces $u$ as well as the strength of the dissipation $b$. For large dissipative forces, the rheology is governed by the Weisenberg number $ \text{Wi}\sim b\dotγ/u$ and displays Herschel-Bulkley form $σ= σ_y+c\text{Wi}^ν$ with exponent $ν=0.45$. Decreasing the strength of dissipation, the scaling with $\text{Wi}$ breaks down and inertial effects show up. The stress decreases via the Johnson-Samwer law $Δσ\sim T_s^{2/3}$, where temperature $T_s$ is exclusively due to shear-induced vibrations. During flow particles prefer to rotate around each other such that the dominant velocities are directed tangentially to the particle surfaces. This tangential channel of energy dissipation and its suppression leads to a discontinuity in the flow curve, and an associated discontinuous shear thinning transition. We set up an analogy with frictional systems, where the phenomenon of discontinuous shear thickening occurs. In both cases tangential forces, frictional or viscous, mediate a transition from one branch of the flowcurve with low tangential dissipation to one with large tangential dissipation.
△ Less
Submitted 15 November, 2018; v1 submitted 17 September, 2018;
originally announced September 2018.
-
Linear rheology of reversibly cross-linked biopolymer networks
Authors:
Henry Amuasi,
Andreas Fischer,
Annette Zippelius,
Claus Heussinger
Abstract:
We suggest a simple model for reversible cross-links, binding and unbinding to/from a network of semiflexible polymers. The resulting frequency dependent response of the network to an applied shear is calculated via Brownian dynamics simulations. It is shown to be rather complex with the timescale of the linkers competing with the excitations of the network. If the lifetime of the linkers is the l…
▽ More
We suggest a simple model for reversible cross-links, binding and unbinding to/from a network of semiflexible polymers. The resulting frequency dependent response of the network to an applied shear is calculated via Brownian dynamics simulations. It is shown to be rather complex with the timescale of the linkers competing with the excitations of the network. If the lifetime of the linkers is the longest timescale, as is indeed the case in most biological networks, then a distinct low frequency peak of the loss modulus develops. The storage modulus shows a corresponding decay from its plateau value, which for irreversible cross-linkers extends all the way to the static limit. This additional relaxation mechanism can be controlled by the relative weight of reversible and irreversible linkers.
△ Less
Submitted 16 August, 2018;
originally announced August 2018.
-
Friction-induced Shear thickening: a microscopic perspective
Authors:
Moumita Maiti,
Annette Zippelius,
Claus Heussinger
Abstract:
We develop a microscopic picture of shear thickening in dense suspensions which emphasizes the role of frictional forces, coupling rotational and translational degrees of freedom. Simulations with contact forces and viscous drag only, reveal pronounced shear thickening with a simultaneous increase in contact number and energy dissipation by frictional forces. At high densities, when the translatio…
▽ More
We develop a microscopic picture of shear thickening in dense suspensions which emphasizes the role of frictional forces, coupling rotational and translational degrees of freedom. Simulations with contact forces and viscous drag only, reveal pronounced shear thickening with a simultaneous increase in contact number and energy dissipation by frictional forces. At high densities, when the translational motion is severely constrained, we observe liquid-like gear-states with pronounced relative rotations of the particles coexisting with solid-like regions which rotate as a whole. The latter are stabilised by frustrated loops which become more numerous and persistent with increasing pressure, giving rise to an increasing lengthscale of this mosaique-like structure and a corresponding increase in viscosity.
△ Less
Submitted 25 September, 2016; v1 submitted 20 June, 2016;
originally announced June 2016.
-
Athermal rheology of weakly attractive soft particles
Authors:
Ehsan Irani,
Pinaki Chaudhuri,
Claus Heussinger
Abstract:
We study the rheology of a soft particulate system where the inter-particle interactions are weakly attractive. Using extensive molecular dynamics simulations, we scan across a wide range of packing fractions ($φ$), attraction strengths ($u$) and imposed shear-rates ($\dotγ$). In striking contrast to repulsive systems, we find that at small shear-rates generically a fragile isostatic solid is form…
▽ More
We study the rheology of a soft particulate system where the inter-particle interactions are weakly attractive. Using extensive molecular dynamics simulations, we scan across a wide range of packing fractions ($φ$), attraction strengths ($u$) and imposed shear-rates ($\dotγ$). In striking contrast to repulsive systems, we find that at small shear-rates generically a fragile isostatic solid is formed even if we go to $φ\ll φ_J$. Further, with increasing shear-rates, even at these low $φ$, non-monotonic flow curves occur which lead to the formation of persistent shear-bands in large enough systems. By tuning the dam** parameter, we also show that inertia plays an important role in this process. Furthermore, we observe enhanced particle dynamics in the attraction-dominated regime as well as a pronounced anisotropy of velocity and diffusion constant, which we take as precursors to the formation of shear bands. At low enough $φ$, we also observe structural changes via the interplay of low shear-rates and attraction with the formation of micro-clusters and voids. Finally, we characterize the properties of the emergent shear bands and thereby, we find surprisingly small mobility of these bands, leading to prohibitely long time-scales and extensive history effects in ram** experiments.
△ Less
Submitted 29 November, 2016; v1 submitted 4 May, 2016;
originally announced May 2016.
-
Thermalized connectivity networks of jammed packings
Authors:
Clemens Buss,
Claus Heussinger,
Oskar Hallatschek
Abstract:
Jammed packings of repulsive elastic spheres have emerged as a rich model system within which elastic properties of disordered glassy materials may be elucidated. Most of the work on these packings have focused on the case of vanishing temperature. Here, we explore the elastic properties of the associated connectivity network for finite temperatures, ignoring the breaking of bonds and the formatio…
▽ More
Jammed packings of repulsive elastic spheres have emerged as a rich model system within which elastic properties of disordered glassy materials may be elucidated. Most of the work on these packings have focused on the case of vanishing temperature. Here, we explore the elastic properties of the associated connectivity network for finite temperatures, ignoring the breaking of bonds and the formation of new ones. Using extensive Monte Carlo simulations, we find that, as the temperature is increased, the resulting spring network shrinks and exhibits a rapidly softening bulk modulus via a cusp. Moreover, the shear modulus stiffens in a fixed volume ensemble but not in a fixed pressure ensemble. These counter-intuitive behaviors may be understood from the characteristic spectrum of soft modes near isostaticity, which resembles the spectrum of a rod near its buckling instability. Our results suggest a generic mechanism for negative thermal expansion coefficients in marginal solids. We discuss the consequences of bond breaking and an apparent analogy between thermalization and shear.
△ Less
Submitted 10 April, 2016;
originally announced April 2016.
-
Viscoelasticity of reversibly crosslinked networks of semiflexible polymers
Authors:
Jan Plagge,
Andreas Fischer,
Claus Heussinger
Abstract:
We present a theoretical framework for the linear and nonlinear visco-elastic properties of reversibly crosslinked networks of semiflexible polymers. In contrast to affine models where network strain couples to the polymer end-to-end distance, in our model strain rather serves to locally distort the network structure. This induces bending modes in the polymer filaments, the properties of wich are…
▽ More
We present a theoretical framework for the linear and nonlinear visco-elastic properties of reversibly crosslinked networks of semiflexible polymers. In contrast to affine models where network strain couples to the polymer end-to-end distance, in our model strain rather serves to locally distort the network structure. This induces bending modes in the polymer filaments, the properties of wich are slaved to the surrounding network structure. Specifically, we investigate the frequency-dependent linear rheology, in particular in combination with crosslink binding/unbinding processes. We also develop schematic extensions to describe the nonlinear response during creep measurements as well as during constant-strainrate ramps.
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
-
Rheological Chaos of Frictional Grains
Authors:
Matthias Grob,
Annette Zippelius,
Claus Heussinger
Abstract:
A two-dimensional dense fluid of frictional grains is shown to exhibit time-chaotic, spatially heterogeneous flow in a range of stress values, $σ$, chosen in the unstable region of s-shaped flow curves. Stress controlled simulations reveal a phase diagram with reentrant stationary flow for small and large stress $σ$. In between no steady flow state can be reached, instead the system either jams or…
▽ More
A two-dimensional dense fluid of frictional grains is shown to exhibit time-chaotic, spatially heterogeneous flow in a range of stress values, $σ$, chosen in the unstable region of s-shaped flow curves. Stress controlled simulations reveal a phase diagram with reentrant stationary flow for small and large stress $σ$. In between no steady flow state can be reached, instead the system either jams or displays time dependent heterogeneous strain rates $\dotγ({\bf r},t)$. The results of simulations are in agreement with the stability analysis of a simple hydrodynamic model, coupling stress and microstructure which we tentatively associate with the frictional contact network.
△ Less
Submitted 2 March, 2016; v1 submitted 27 July, 2015;
originally announced July 2015.
-
Free volume under shear
Authors:
Moumita Maiti,
H. A. Vinutha,
Srikanth Sastry,
Claus Heussinger
Abstract:
Using an athermal quasistatic simulation protocol, we study the distribution of free volumes in sheared hard-particle packings close to, but below, the random-close packing threshold. We show that under shear, and independent of volume fraction, the free volumes develop features similar to close-packed systems -- particles self-organize in a manner as to mimick the isotropically jammed state. We c…
▽ More
Using an athermal quasistatic simulation protocol, we study the distribution of free volumes in sheared hard-particle packings close to, but below, the random-close packing threshold. We show that under shear, and independent of volume fraction, the free volumes develop features similar to close-packed systems -- particles self-organize in a manner as to mimick the isotropically jammed state. We compare athermally sheared packings with thermalized packings and show that thermalization leads to an erasure of these structural features. The temporal evolution, in particular the opening-up and the closing of free-volume patches is associated with the single-particle dynamics, showing a crossover from ballistic to diffusive behavior.
△ Less
Submitted 20 June, 2015; v1 submitted 8 June, 2015;
originally announced June 2015.
-
Motor-free actin bundle contractility driven by molecular crowding
Authors:
Jörg Schnauß,
Tom Golde,
Carsten Schuldt,
B. U. Sebastian Schmidt,
Martin Glaser,
Dan Strehle,
Claus Heussinger,
Josef A. Käs
Abstract:
Modeling approaches of suspended, rod-like particles and recent experimental data have shown that depletion forces display different signatures depending on the orientation of these particles. It has been shown that axial attraction of two rods yields contractile forces of 0.1pN that are independent of the relative axial shift of the two rods. Here, we measured depletion-caused interactions of act…
▽ More
Modeling approaches of suspended, rod-like particles and recent experimental data have shown that depletion forces display different signatures depending on the orientation of these particles. It has been shown that axial attraction of two rods yields contractile forces of 0.1pN that are independent of the relative axial shift of the two rods. Here, we measured depletion-caused interactions of actin bundles extending the phase space of single pairs of rods to a multi-particle system. In contrast to a filament pair, we found forces up to 3pN . Upon bundle relaxation forces decayed exponentially with a mean decay time of 3.4s . These different dynamics are explained within the frame of a mathematical model by taking pairwise interactions to a multi-filament scale. The macromolecular content employed for our experiments is well below the crowding of cells. Thus, we propose that arising forces can contribute to biological force generation without the need to convert chemical energy into mechanical work.
△ Less
Submitted 10 March, 2015;
originally announced March 2015.
-
Elasto-plastic response of reversibly crosslinked biopolymer bundles
Authors:
Poulomi Sadhukhan,
Ole Schuman,
Claus Heussinger
Abstract:
We study the response of F-actin bundles to driving forces through a simple analytical model. We consider two filaments connected by reversibly bound crosslinks and driven by an external force. Two failure modes under load can be defined. \textit{Brittle failure} is observed when crosslinks suddenly and collectively unbind, leading to catastrophic loss of bundle integrity. During \textit{ductile f…
▽ More
We study the response of F-actin bundles to driving forces through a simple analytical model. We consider two filaments connected by reversibly bound crosslinks and driven by an external force. Two failure modes under load can be defined. \textit{Brittle failure} is observed when crosslinks suddenly and collectively unbind, leading to catastrophic loss of bundle integrity. During \textit{ductile failure}, on the other hand, bundle integrity is maintained, however at the cost of crosslink reorganization and defect formation. We present phase diagrams for the onset of failure, highlighting the importance of the crosslink stiffness for these processes. Crossing the phase boundaries, force-deflection curves display (frequency-dependent) hysteresis loops, reflecting the first-order character of the failure processes. We evidence how the introduction of defects can lead to complex elasto-plastic relaxation processes, once the force is switched off. Depending on, both, the time-scale for defect motion as well as the crosslink stiffness, bundles can remain in a quasi-permanent plastically deformed state for a very long time.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
(Ir)reversibility in dense granular systems driven by oscillating forces
Authors:
Ronny Moebius,
Claus Heussinger
Abstract:
We use computer simulations to study highly dense systems of granular particles that are driven by oscillating forces. We implement different dissipation mechanisms that are used to extract the injected energy. In particular, the action of a simple local Stokes' drag is compared with non-linear and history-dependent frictional forces that act either between particle pairs or between particles and…
▽ More
We use computer simulations to study highly dense systems of granular particles that are driven by oscillating forces. We implement different dissipation mechanisms that are used to extract the injected energy. In particular, the action of a simple local Stokes' drag is compared with non-linear and history-dependent frictional forces that act either between particle pairs or between particles and an external container wall. The Stokes' drag leads to particle motion that is periodic with the driving force, even at high densities around close packing where particles undergo frequent collisions. With the introduction of inter-particle frictional forces this "interacting absorbing state" is destroyed and particles start to diffuse around. By reducing the density of the material we go through another transition to a "non-interacting" absorbing state, where particles independently follow the force-induced oscillations without collisions. In the system with particle-wall frictional interactions this transition has signs of a discontinuous phase transition. It is accompanied by a diverging relaxation time, but not by a vanishing order parameter, which rather jumps to zero at the transition.
△ Less
Submitted 7 April, 2014;
originally announced April 2014.
-
Impact of attractive interactions on the rheology of dense athermal particles
Authors:
Ehsan Irani,
Pinaki Chaudhuri,
Claus Heussinger
Abstract:
Using numerical simulations, the rheological response of an athermal assembly of soft particles with tunable attractive interactions is studied in the vicinity of jamming. At small attractions, a fragile solid develops and a finite yield stress is measured. Moreover, the measured flow curves have unstable regimes, which lead to persistent shearbanding. These features are rationalized by establishi…
▽ More
Using numerical simulations, the rheological response of an athermal assembly of soft particles with tunable attractive interactions is studied in the vicinity of jamming. At small attractions, a fragile solid develops and a finite yield stress is measured. Moreover, the measured flow curves have unstable regimes, which lead to persistent shearbanding. These features are rationalized by establishing a link between the rheology and the inter-particle connectivity, which also provides a minimal model to describe the flow curves.
△ Less
Submitted 20 May, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Jamming of Frictional Particles: a Non-equilibrium First Order Phase Transition
Authors:
Matthias Grob,
Claus Heussinger,
Annette Zippelius
Abstract:
We propose a phase diagram for the shear flow of dry granular particles in two dimensions based on simulations and a phenomenological Landau-theory for a nonequilibrium first order phase transition. Our approach incorporates both frictional as well as frictionless particles. The most important feature of the frictional phase diagram is re-entrant flow and a critical jamming point at finite stress.…
▽ More
We propose a phase diagram for the shear flow of dry granular particles in two dimensions based on simulations and a phenomenological Landau-theory for a nonequilibrium first order phase transition. Our approach incorporates both frictional as well as frictionless particles. The most important feature of the frictional phase diagram is re-entrant flow and a critical jamming point at finite stress. In the frictionless limit the regime of re-entrance vanishes and the jamming transition is continuous with a critical point at zero stress. The jamming phase diagrams derived from the model agree with the experiments of Bi et al. (Nature (2011)) and brings together previously conflicting numerical results.
△ Less
Submitted 19 May, 2014; v1 submitted 21 November, 2013;
originally announced November 2013.
-
Rheology near jamming - the influence of lubrication forces
Authors:
Moumita Maiti,
Claus Heussinger
Abstract:
We study, by computer simulations, the role of different dissipation forces on the rheological properties of highly-dense particle-laden flows. In particular, we are interested in the close-packing limit (jamming) and the question if "universal" observables can be identified that do not depend on the details of the dissipation model. To this end, we define a simplified lubrication force and system…
▽ More
We study, by computer simulations, the role of different dissipation forces on the rheological properties of highly-dense particle-laden flows. In particular, we are interested in the close-packing limit (jamming) and the question if "universal" observables can be identified that do not depend on the details of the dissipation model. To this end, we define a simplified lubrication force and systematically vary the range $h_c$ of this interaction. For fixed $h_c$ a cross-over is seen from a Newtonian flow regime at small strain rates to inertia-dominated flow at larger strain rates. The same cross-over is observed as a function of the lubrication range $h_c$. At the same time, but only at high densities close to jamming, particle velocity as well as local density distributions are unaffected by changes in the lubrication range -- they are candidates for "universal" behavior. At densities away from jamming, this universality is lost: short-range lubrication forces lead to pronounced particle clustering, while longer-ranged lubrication does not. These findings highlight the importance of "geometric" packing constraints for particle motion -- independent of the specific dissipation model. With the free volume vanishing at random-close packing, particle motion is more and more constrained by the ever smaller amount of free space. On the other side, macroscopic rheological observables, as well as higher-order correlation functions retain the variability of the underlying dissipation model.
△ Less
Submitted 26 May, 2014; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Shear thickening in granular suspensions: inter-particle friction and dynamically correlated clusters
Authors:
Claus Heussinger
Abstract:
We consider the shear rheology of concentrated suspensions of non-Brownian frictional particles. The key result of our study is the emergence of a pronounced shear-thickening regime, where frictionless particles would normally undergo shear-thinning. We clarify that shear thickening in our simulations is due to enhanced energy dissipation via frictional inter-particle forces. Moreover, we evidence…
▽ More
We consider the shear rheology of concentrated suspensions of non-Brownian frictional particles. The key result of our study is the emergence of a pronounced shear-thickening regime, where frictionless particles would normally undergo shear-thinning. We clarify that shear thickening in our simulations is due to enhanced energy dissipation via frictional inter-particle forces. Moreover, we evidence the formation of dynamically correlated particle-clusters of size $ξ$, which contribute to shear thickening via an increase in \emph{viscous} dissipation. A scaling argument gives $η\sim ξ^2$, which is in very good agreement with the data.
△ Less
Submitted 21 November, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
Melting a granular glass by cooling
Authors:
Jan Plagge,
Claus Heussinger
Abstract:
Driven granular systems readily form glassy phases at high particle volume fractions and low driving amplitudes. We use computer simulations of a driven granular glass to evidence a re-entrance melting transition into a fluid state, which, contrary to intuition, occurs by \emph{reducing} the amplitude of the driving. This transition is accompanied by anomalous particle dynamics and super-diffusive…
▽ More
Driven granular systems readily form glassy phases at high particle volume fractions and low driving amplitudes. We use computer simulations of a driven granular glass to evidence a re-entrance melting transition into a fluid state, which, contrary to intuition, occurs by \emph{reducing} the amplitude of the driving. This transition is accompanied by anomalous particle dynamics and super-diffusive behavior on intermediate time-scales. We highlight the special role played by frictional interactions, which help particles to escape their glassy cages. Such an effect is in striking contrast to what friction is expected to do: reduce particle mobility by making them stick.
△ Less
Submitted 5 February, 2013; v1 submitted 6 October, 2012;
originally announced October 2012.
-
Stress relaxation through crosslink unbinding in cytoskeletal networks
Authors:
Claus Heussinger
Abstract:
The mechanical properties of cells are dominated by the cytoskeleton, an interconnected network of long elastic filaments. The connections between the filaments are provided by crosslinking proteins, which constitute, next to the filaments, the second important mechanical element of the network. An important aspect of cytoskeletal assemblies is their dynamic nature, which allows remodeling in resp…
▽ More
The mechanical properties of cells are dominated by the cytoskeleton, an interconnected network of long elastic filaments. The connections between the filaments are provided by crosslinking proteins, which constitute, next to the filaments, the second important mechanical element of the network. An important aspect of cytoskeletal assemblies is their dynamic nature, which allows remodeling in response to external cues. The reversible nature of crosslink binding is an important mechanism that underlies these dynamical processes. Here, we develop a theoretical model that provides insight into how the mechanical properties of cytoskeletal networks may depend on their underlying constituting elements. We incorporate three important ingredients: nonaffine filament deformations in response to network strain; interplay between filament and crosslink mechanical properties; reversible crosslink (un)binding in response to imposed stress. With this we are able to self-consistently calculate the nonlinear modulus of the network as a function of deformation amplitude and crosslink as well as filament stiffnesses. During loading crosslink unbinding processes lead to a relaxation of stress and therefore to a reduction of the network modulus and eventually to network failure, when all crosslink are unbound. This softening due to crosslink unbinding generically competes with an inherent stiffening response, which may either be due to filament or crosslink nonlinear elasticity.
△ Less
Submitted 24 September, 2012;
originally announced September 2012.
-
Shear flow of non-Brownian suspensions close to jamming
Authors:
Bruno Andreotti,
Jean-Louis Barrat,
Claus Heussinger
Abstract:
The dynamical mechanisms controlling the rheology of dense suspensions close to jamming are investigated numerically, using simplified models for the relevant dissipative forces. We show that the velocity fluctuations control the dissipation rate and therefore the effective viscosity of the suspension. These fluctuations are similar in quasi-static simulations and for finite strain rate calculatio…
▽ More
The dynamical mechanisms controlling the rheology of dense suspensions close to jamming are investigated numerically, using simplified models for the relevant dissipative forces. We show that the velocity fluctuations control the dissipation rate and therefore the effective viscosity of the suspension. These fluctuations are similar in quasi-static simulations and for finite strain rate calculations with various dam** schemes. We conclude that the statistical properties of grain trajectories -- in particular the critical exponent of velocity fluctuations with respect to volume fraction φ-- only weakly depend on the dissipation mechanism. Rather they are determined by steric effects, which are the main driving forces in the quasistatic simulations. The critical exponent of the suspension viscosity with respect to φcan then be deduced, and is consistent with experimental data.
△ Less
Submitted 18 July, 2012; v1 submitted 6 December, 2011;
originally announced December 2011.
-
Crosslinked biopolymer bundles: crosslink reversibility leads to cooperative binding/unbinding phenomena
Authors:
Richard L. C. Vink,
Claus Heussinger
Abstract:
We consider a biopolymer bundle consisting of filaments that are crosslinked together. The crosslinks are reversible: they can dynamically bind and unbind adjacent filament pairs as controlled by a binding enthalpy. The bundle is subjected to a bending deformation and the corresponding distribution of crosslinks is measured. For a bundle consisting of two filaments, upon increasing the bending amp…
▽ More
We consider a biopolymer bundle consisting of filaments that are crosslinked together. The crosslinks are reversible: they can dynamically bind and unbind adjacent filament pairs as controlled by a binding enthalpy. The bundle is subjected to a bending deformation and the corresponding distribution of crosslinks is measured. For a bundle consisting of two filaments, upon increasing the bending amplitude, a first-order transition is observed. The transition is from a state where the filaments are tightly coupled by many bound crosslinks, to a state of nearly independent filaments with only a few bound crosslinks. For a bundle consisting of more than two filaments, a series of first-order transitions is observed. The transitions are connected with the formation of an interface between regions of low and high crosslink densities. Combining umbrella sampling Monte Carlo simulations with analytical calculations, we present a detailed picture of how the competition between crosslink shearing and filament stretching drives the transitions. We also find that, when the crosslinks become soft, collective behavior is not observed: the crosslinks then unbind one after the other leading to a smooth decrease of the average crosslink density.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
Theory of Crosslinked Bundles of Helical Filaments: Intrinsic Torques in Self-Limiting Biopolymer Assemblies
Authors:
Claus Heussinger,
Gregory M. Grason
Abstract:
Inspired by the complex influence of the globular crosslinking proteins on the formation of biofilament bundles in living organisms, we study and analyze a theoretical model for the structure and thermodynamics of bundles of helical filaments assembled in the presence of crosslinking molecules. The helical structure of filaments, a universal feature of biopolymers such as filamentous actin, is sho…
▽ More
Inspired by the complex influence of the globular crosslinking proteins on the formation of biofilament bundles in living organisms, we study and analyze a theoretical model for the structure and thermodynamics of bundles of helical filaments assembled in the presence of crosslinking molecules. The helical structure of filaments, a universal feature of biopolymers such as filamentous actin, is shown to generically frustrate the geometry of crosslinking between the "grooves" of two neighboring filaments. We develop a coarse-grained model to investigate the interplay between the geometry of binding and mechanics of both linker and filament distortion, and we show that crosslinking in parallel bundles of helical filaments generates {\it intrinsic torques}, of the type that tend to wind bundle superhelically about its central axis. Crosslinking mediates a non-linear competition between the preference for bundle twist and the size-dependent mechanical cost of filament bending, which in turn gives rise to feedback between the global twist of self-assembled bundles and their lateral size. Finally, we demonstrate that above a critical density of bound crosslinkers, twisted bundles form with a thermodynamically preferred radius that, in turn, increases with a further increase in crosslinking bonds. We identify the {\it stiffness} of crosslinking bonds as a key parameter governing the sensitivity of bundle structure and assembly to the availability and affinity of crosslinkers.
△ Less
Submitted 27 April, 2011;
originally announced April 2011.
-
Cooperative crosslink (un)binding in slowly driven bundles of semiflexible filaments
Authors:
Claus Heussinger
Abstract:
Combining simulations and theory I study the interplay between bundle elastic degrees of freedom and crosslink binding propensity. By slowly driving bundles into a deformed configuration, and depending on the mechanical stiffness of the crosslinking agent, the binding affinity is shown to display a sudden and discontinuous drop. This indicates a cooperative unbinding process that involves the cros…
▽ More
Combining simulations and theory I study the interplay between bundle elastic degrees of freedom and crosslink binding propensity. By slowly driving bundles into a deformed configuration, and depending on the mechanical stiffness of the crosslinking agent, the binding affinity is shown to display a sudden and discontinuous drop. This indicates a cooperative unbinding process that involves the crossing of a free-energy barrier. Choosing the proper crosslinker, therefore, not only allows to change the composite elastic properties of the bundle, but also the relevant time-scales, which can be tuned from the single-crosslink binding rate to the much longer escape time over the free-energy barrier.
△ Less
Submitted 21 March, 2011;
originally announced March 2011.
-
Semiflexible Filamentous Composites
Authors:
Elisabeth M. Huisman,
Claus Heussinger,
Cornelis Storm,
Gerard T. Barkema
Abstract:
Inspired by the ubiquity of composite filamentous networks in nature we investigate models of biopolymer networks that consist of interconnected floppy and stiff filaments. Numerical simulations carried out in three dimensions allow us to explore the microscopic partitioning of stresses and strains between the stiff and floppy fractions c_s and c_f, and reveal a non-trivial relationship between th…
▽ More
Inspired by the ubiquity of composite filamentous networks in nature we investigate models of biopolymer networks that consist of interconnected floppy and stiff filaments. Numerical simulations carried out in three dimensions allow us to explore the microscopic partitioning of stresses and strains between the stiff and floppy fractions c_s and c_f, and reveal a non-trivial relationship between the mechanical behavior and the relative fraction of stiff polymer: when there are few stiff polymers, non-percolated stiff ``inclusions`` are protected from large deformations by an encompassing floppy matrix, while at higher fractions of stiff material the stiff network is independently percolated and dominates the mechanical response.
△ Less
Submitted 30 August, 2010;
originally announced August 2010.
-
Superdiffusive, heterogeneous, and collective particle motion near the jamming transition in athermal disordered materials
Authors:
Claus Heussinger,
Ludovic Berthier,
Jean-Louis Barrat
Abstract:
We use computer simulations to study the microscopic dynamics of an athermal assembly of soft particles near the fluid-to-solid, jamming transition. Borrowing tools developed to study dynamic heterogeneity near glass transitions, we discover a number of original signatures of the jamming transition at the particle scale. We observe superdiffusive, spatially heterogeneous, and collective particle m…
▽ More
We use computer simulations to study the microscopic dynamics of an athermal assembly of soft particles near the fluid-to-solid, jamming transition. Borrowing tools developed to study dynamic heterogeneity near glass transitions, we discover a number of original signatures of the jamming transition at the particle scale. We observe superdiffusive, spatially heterogeneous, and collective particle motion over a characteristic scale which displays a surprising non-monotonic behavior across the transition. In the solid phase, the dynamics is an intermittent succession of elastic deformations and plastic relaxations, which are both characterized by scale-free spatial correlations and system size dependent dynamic susceptibilities. Our results show that dynamic heterogeneities in dense athermal systems and glass-formers are very different, and shed light on recent experimental reports of `anomalous' dynamical behavior near the jamming transition of granular and colloidal assemblies.
△ Less
Submitted 23 June, 2010; v1 submitted 6 January, 2010;
originally announced January 2010.
-
Fluctuations and correlations during the shear flow of elastic particles near the jamming transition
Authors:
Claus Heussinger,
Pinaki Chaudhuri,
Jean-Louis Barrat
Abstract:
We present a numerical study of the flow of an assembly of frictionless soft discs at zero temperature, in the vicinity of and slightly above the jamming density. We find that some of the flow properties, such as the fluctuations in the number of contacts or the shear modulus, display a critical like behaviour that is governed by the proximity to the jamming point. Dynamical correlations during a…
▽ More
We present a numerical study of the flow of an assembly of frictionless soft discs at zero temperature, in the vicinity of and slightly above the jamming density. We find that some of the flow properties, such as the fluctuations in the number of contacts or the shear modulus, display a critical like behaviour that is governed by the proximity to the jamming point. Dynamical correlations during a quasistatic deformation, however, are non critical and dominated by system size. At finite strain rates, these dynamical correlations acquire a finite, strain-rate dependent amplitude, that decreases when approaching the jamming point from above.
△ Less
Submitted 23 June, 2010; v1 submitted 5 January, 2010;
originally announced January 2010.
-
Statics and Dynamics of the Wormlike Bundle Model
Authors:
Claus Heussinger,
Felix Schueller,
Erwin Frey
Abstract:
Bundles of filamentous polymers are primary structural components of a broad range of cytoskeletal structures, and their mechanical properties play key roles in cellular functions ranging from locomotion to mechanotransduction and fertilization. We give a detailed derivation of a wormlike bundle model as a generic description for the statics and dynamics of polymer bundles consisting of semiflex…
▽ More
Bundles of filamentous polymers are primary structural components of a broad range of cytoskeletal structures, and their mechanical properties play key roles in cellular functions ranging from locomotion to mechanotransduction and fertilization. We give a detailed derivation of a wormlike bundle model as a generic description for the statics and dynamics of polymer bundles consisting of semiflexible polymers interconnected by crosslinking agents. The elastic degrees of freedom include bending as well as twist deformations of the filaments and shear deformation of the crosslinks. We show that a competition between the elastic properties of the filaments and those of the crosslinks leads to renormalized effective bend and twist rigidities that become mode-number dependent. The strength and character of this dependence is found to vary with bundle architecture, such as the arrangement of filaments in the cross section and pretwist. We discuss two paradigmatic cases of bundle architecture, a uniform arrangement of filaments as found in F-actin bundles and a shell-like architecture as characteristic for microtubules. Each architecture is found to have its own universal ratio of maximal to minimal bending rigidity, independent of the specific type of crosslink induced filament coupling; our predictions are in reasonable agreement with available experimental data for microtubules. Moreover, we analyze the predictions of the wormlike bundle model for experimental observables such as the tangent-tangent correlation function and dynamic response and correlation functions. Finally, we analyze the effect of pretwist (helicity) on the mechanical properties of bundles. We predict that microtubules with different number of protofilaments should have distinct variations in their effective bending rigidity.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
The jamming transition as probed by quasistatic shear flow
Authors:
Claus Heussinger,
Jean-Louis Barrat
Abstract:
We study the rheology of amorphous packings of soft, frictionless particles close to jamming. Implementing a quasistatic simulation method we generate a well defined ensemble of states that directly samples the system at its yield-stress. A continuous jamming transition from a freely-flowing state to a yield stress situation takes place at a well defined packing fraction, where the scaling laws…
▽ More
We study the rheology of amorphous packings of soft, frictionless particles close to jamming. Implementing a quasistatic simulation method we generate a well defined ensemble of states that directly samples the system at its yield-stress. A continuous jamming transition from a freely-flowing state to a yield stress situation takes place at a well defined packing fraction, where the scaling laws characteristic of isostatic solids are observed. We propose that long-range correlations observed below the transition are dominated by this isostatic point, while those that are observed above the transition are characteristic of dense, disordered elastic media.
△ Less
Submitted 9 May, 2009; v1 submitted 12 February, 2009;
originally announced February 2009.
-
Force distributions and force chains in random stiff fiber networks
Authors:
Claus Heussinger,
Erwin Frey
Abstract:
We study the elasticity of random stiff fiber networks. The elastic response of the fibers is characterized by a central force stretching stiffness as well as a bending stiffness that acts transverse to the fiber contour. Previous studies have shown that this model displays an anomalous elastic regime where the stretching mode is fully frozen out and the elastic energy is completely dominated by…
▽ More
We study the elasticity of random stiff fiber networks. The elastic response of the fibers is characterized by a central force stretching stiffness as well as a bending stiffness that acts transverse to the fiber contour. Previous studies have shown that this model displays an anomalous elastic regime where the stretching mode is fully frozen out and the elastic energy is completely dominated by the bending mode. We demonstrate by simulations and scaling arguments that, in contrast to the bending dominated \emph{elastic energy}, the equally important \emph{elastic forces} are to a large extent stretching dominated. By characterizing these forces on microscopic, mesoscopic and macroscopic scales we find two mechanisms of how forces are transmitted in the network. While forces smaller than a threshold $F_c$ are effectively balanced by a homogeneous background medium, forces larger than $F_c$ are found to be heterogeneously distributed throughout the sample, giving rise to highly localized force-chains known from granular media.
△ Less
Submitted 2 October, 2007; v1 submitted 10 May, 2007;
originally announced May 2007.
-
Nonaffine rubber elasticity for stiff polymer networks
Authors:
C. Heussinger,
B. Schaefer,
E. Frey
Abstract:
We present a theory for the elasticity of cross-linked stiff polymer networks. Stiff polymers, unlike their flexible counterparts, are highly anisotropic elastic objects. Similar to mechanical beams stiff polymers easily deform in bending, while they are much stiffer with respect to tensile forces (``stretching''). Unlike in previous approaches, where network elasticity is derived from the stret…
▽ More
We present a theory for the elasticity of cross-linked stiff polymer networks. Stiff polymers, unlike their flexible counterparts, are highly anisotropic elastic objects. Similar to mechanical beams stiff polymers easily deform in bending, while they are much stiffer with respect to tensile forces (``stretching''). Unlike in previous approaches, where network elasticity is derived from the stretching mode, our theory properly accounts for the soft bending response. A self-consistent effective medium approach is used to calculate the macroscopic elastic moduli starting from a microscopic characterization of the deformation field in terms of ``floppy modes'' -- low-energy bending excitations that retain a high degree of non-affinity. The length-scale characterizing the emergent non-affinity is given by the ``fiber length'' $l_f$, defined as the scale over which the polymers remain straight. The calculated scaling properties for the shear modulus are in excellent agreement with the results of recent simulations obtained in two-dimensional model networks. Furthermore, our theory can be applied to rationalize bulk rheological data in reconstituted actin networks.
△ Less
Submitted 26 November, 2007; v1 submitted 3 March, 2007;
originally announced March 2007.
-
Statistical Mechanics of Semiflexible Bundles of Wormlike Polymer Chains
Authors:
Claus Heussinger,
Mark Bathe,
Erwin Frey
Abstract:
We demonstrate that a semiflexible bundle of wormlike chains exhibits a state-dependent bending stiffness that alters fundamentally its scaling behavior with respect to the standard wormlike chain. We explore the equilibrium conformational and mechanical behavior of wormlike bundles in isolation, in crosslinked networks, and in solution.
We demonstrate that a semiflexible bundle of wormlike chains exhibits a state-dependent bending stiffness that alters fundamentally its scaling behavior with respect to the standard wormlike chain. We explore the equilibrium conformational and mechanical behavior of wormlike bundles in isolation, in crosslinked networks, and in solution.
△ Less
Submitted 26 July, 2007; v1 submitted 5 February, 2007;
originally announced February 2007.
-
Mechanics of bundled semiflexible polymer networks
Authors:
O. Lieleg,
M. M. A. E. Claessens,
C. Heussinger,
E. Frey,
A. R. Bausch
Abstract:
While actin bundles are used by living cells for structural fortification, the microscopic origin of the elasticity of bundled networks is not understood. Here, we show that above a critical concentration of the actin binding protein fascin, a solution of actin filaments organizes into a pure network of bundles. While the elasticity of weakly crosslinked networks is dominated by the affine defor…
▽ More
While actin bundles are used by living cells for structural fortification, the microscopic origin of the elasticity of bundled networks is not understood. Here, we show that above a critical concentration of the actin binding protein fascin, a solution of actin filaments organizes into a pure network of bundles. While the elasticity of weakly crosslinked networks is dominated by the affine deformation of tubes, the network of bundles can be fully understood in terms of non-affine bending undulations.
△ Less
Submitted 30 August, 2007; v1 submitted 29 November, 2006;
originally announced November 2006.
-
Cytoskeletal bundle bending, buckling, and stretching behavior
Authors:
Mark Bathe,
Claus Heussinger,
Mireille Claessens,
Andreas Bausch,
Erwin Frey
Abstract:
F-actin bundles constitute principal components of a multitude of cytoskeletal processes including stereocilia, filopodia, microvilli, neurosensory bristles, cytoskeletal stress fibers, and the sperm acrosome. The bending, buckling, and stretching behaviors of these processes play key roles in cellular functions ranging from locomotion to mechanotransduction and fertilization. Despite their cent…
▽ More
F-actin bundles constitute principal components of a multitude of cytoskeletal processes including stereocilia, filopodia, microvilli, neurosensory bristles, cytoskeletal stress fibers, and the sperm acrosome. The bending, buckling, and stretching behaviors of these processes play key roles in cellular functions ranging from locomotion to mechanotransduction and fertilization. Despite their central importance to cellular function, F-actin bundle mechanics remain poorly understood. Here, we demonstrate that bundle bending stiffness is a state-dependent quantity with three distinct regimes that are mediated by bundle dimensions in addition to crosslink properties. We calculate the complete state-dependence of the bending stiffness and elucidate the mechanical origin of each. A generic set of design parameters delineating the regimes in state-space is derived and used to predict the bending stiffness of a variety of F-actin bundles found in cells. Finally, the broad and direct implications that the isolated state-dependence of F-actin bundle stiffness has on the interpretation of the bending, buckling, and stretching behavior of cytoskeletal bundles is addressed.
△ Less
Submitted 15 March, 2007; v1 submitted 24 July, 2006;
originally announced July 2006.
-
Floppy modes and non-affine deformations in random fiber networks
Authors:
Claus Heussinger,
Erwin Frey
Abstract:
We study the elasticity of random fiber networks. Starting from a microscopic picture of the non-affine deformation fields we calculate the macroscopic elastic moduli both in a scaling theory and a self-consistent effective medium theory. By relating non-affinity to the low-energy excitations of the network (``floppy-modes'') we achieve a detailed characterization of the non-affine deformations…
▽ More
We study the elasticity of random fiber networks. Starting from a microscopic picture of the non-affine deformation fields we calculate the macroscopic elastic moduli both in a scaling theory and a self-consistent effective medium theory. By relating non-affinity to the low-energy excitations of the network (``floppy-modes'') we achieve a detailed characterization of the non-affine deformations present in fibrous networks.
△ Less
Submitted 12 September, 2006; v1 submitted 26 March, 2006;
originally announced March 2006.
-
The Role of Architecture in the Elastic Response of Semiflexible Polymer and Fiber Networks
Authors:
Claus Heussinger,
Erwin Frey
Abstract:
We study the elasticity of cross-linked networks of thermally fluctuating stiff polymers. As compared to their purely mechanical counterparts, it is shown that these thermal networks have a qualitatively different elastic response. By accounting for the entropic origin of the single-polymer elasticity, the networks acquire a strong susceptibility to polydispersity and structural randomness that…
▽ More
We study the elasticity of cross-linked networks of thermally fluctuating stiff polymers. As compared to their purely mechanical counterparts, it is shown that these thermal networks have a qualitatively different elastic response. By accounting for the entropic origin of the single-polymer elasticity, the networks acquire a strong susceptibility to polydispersity and structural randomness that is completely absent in athermal models. In extensive numerical studies we systematically vary the architecture of the networks and identify a wealth of phenomena that clearly show the strong dependence of the emergent macroscopic moduli on the underlying mesoscopic network structure. In particular, we highlight the importance of the full polymer length that to a large extent controls the elastic response of the network, surprisingly, even in parameter regions where it does not enter the macroscopic moduli explicitly. We provide theoretical scaling arguments to relate the observed macroscopic elasticity to the physical mechanisms on the microscopic and the mesoscopic scale.
△ Less
Submitted 18 January, 2007; v1 submitted 21 December, 2005;
originally announced December 2005.
-
Stiff Polymers, Foams and Fiber Networks
Authors:
Claus Heussinger,
Erwin Frey
Abstract:
We study the elasticity of fibrous materials composed of generalized stiff polymers. It is shown that in contrast to cellular foam-like structures affine strain fields are generically unstable. Instead, a subtle interplay between the architecture of the network and the elastic properties of its building blocks leads to intriguing mechanical properties with intermediate asymptotic scaling regimes…
▽ More
We study the elasticity of fibrous materials composed of generalized stiff polymers. It is shown that in contrast to cellular foam-like structures affine strain fields are generically unstable. Instead, a subtle interplay between the architecture of the network and the elastic properties of its building blocks leads to intriguing mechanical properties with intermediate asymptotic scaling regimes. We present exhaustive numerical studies based on a finite element method complemented by scaling arguments.
△ Less
Submitted 15 March, 2005;
originally announced March 2005.