Showing 1–10 of 10 results for author: Hernandez, M G

Open Source Robot Localization for Non-Planar Environments

Authors: Francisco Martín Rico, José Miguel Guerrero Hernández, Rodrigo Pérez Rodríguez, Juan Diego Peña Narváez, Alberto García Gómez-Jacinto

Abstract: The operational environments in which a mobile robot executes its missions often exhibit non-flat terrain characteristics, encompassing outdoor and indoor settings featuring ramps and slopes. In such scenarios, the conventional methodologies employed for localization encounter novel challenges and limitations. This study delineates a localization framework incorporating ground elevation and inclin… ▽ More The operational environments in which a mobile robot executes its missions often exhibit non-flat terrain characteristics, encompassing outdoor and indoor settings featuring ramps and slopes. In such scenarios, the conventional methodologies employed for localization encounter novel challenges and limitations. This study delineates a localization framework incorporating ground elevation and incline considerations, deviating from traditional 2D localization paradigms that may falter in such contexts. In our proposed approach, the map encompasses elevation and spatial occupancy information, employing Gridmaps and Octomaps. At the same time, the perception model is designed to accommodate the robot's inclined orientation and the potential presence of ground as an obstacle, besides usual structural and dynamic obstacles. We provide an implementation of our approach fully working with Nav2, ready to replace the baseline AMCL approach when the robot is in non-planar environments. Our methodology was rigorously tested in both simulated environments and through practical application on actual robots, including the Tiago and Summit XL models, across various settings ranging from indoor and outdoor to flat and uneven terrains. Demonstrating exceptional precision, our approach yielded error margins below 10 centimeters and 0.05 radians in indoor settings and less than 1.0 meters in extensive outdoor routes. While our results exhibit a slight improvement over AMCL in indoor environments, the enhancement in performance is significantly more pronounced when compared to 3D SLAM algorithms. This underscores the considerable robustness and efficiency of our approach, positioning it as an effective strategy for mobile robots tasked with navigating expansive and intricate indoor/outdoor environments. △ Less

Submitted 30 March, 2024; v1 submitted 22 September, 2023; originally announced September 2023.

Band structure, superconductivity and polytypism in AuSn$_4$

Authors: Edwin Herrera, Beilun Wu, Evan O'Leary, Alberto M. Ruiz, Miguel Águeda, Pablo García Talavera, Víctor Barrena, Jon Azpeitia, Carmen Munuera, Mar García Hernández, Lin-Lin Wang, Adam Kaminski, Paul C. Canfield, José Baldoví, Isabel Guillamón, Hermann Suderow

Abstract: The orthorhombic compound AuSn4 is compositionally similar to the Dirac node arc semimetal PtSn$_4$. AuSn$_4$ is, contrary to PtSn$_4$, superconducting with a critical temperature of T$_c$ = 2.35 K. Recent measurements present indications for quasi two-dimensional superconducting behavior in AuSn$_4$. Here we present measurements of the superconducting density of states and the band structure of A… ▽ More The orthorhombic compound AuSn4 is compositionally similar to the Dirac node arc semimetal PtSn$_4$. AuSn$_4$ is, contrary to PtSn$_4$, superconducting with a critical temperature of T$_c$ = 2.35 K. Recent measurements present indications for quasi two-dimensional superconducting behavior in AuSn$_4$. Here we present measurements of the superconducting density of states and the band structure of AuSn$_4$ through Scanning Tunneling Microscopy (STM) and Angular Resolved Photoemission Spectroscopy (ARPES). The superconducting gap values in different portions of the Fermi surface are spread around Δ0 = 0.4 meV, which is close to but somewhat larger than $Δ=$ 1.76kBT$_c$ expected from BCS theory. We observe superconducting features in the tunneling conductance at the surface up to temperatures about 20% larger than bulk Tc. The band structure calculated with Density Functional Theory (DFT) follows well the results of ARPES. The crystal structure presents two possible stackings of Sn layers, giving two nearly degenerate polytypes. This makes AuSn$_4$ a rather unique case with a three dimensional electronic band structure but properties ressembling those of low dimensional layered compounds. △ Less

Submitted 15 February, 2023; v1 submitted 20 May, 2022; originally announced May 2022.

Journal ref: Phys. Rev. Materials 7, 024804 (2023)

Thermal Conductivity measurements of macroscopic frozen Salt Ice analogs of Jovian Icy moons in support of the planned JUICE mission

Authors: Cristóbal González Díaz, Sofia Aparicio Secanellas, Guillermo M. Muñoz Caro, José Javier Anaya Velayos, Hector Carrascosa, Margarita G. Hernández, Victoria Muñoz-Iglesias, Ángel Marcos-Fernández, Olga Prieto-Ballesteros, Rosario Lorente, Olivier Witasse, Nicolas Altobelli

Abstract: The study of thermal properties of frozen salt solutions representative of ice layers in Jovian moons is crucial to support the JUpiter ICy moons Explorer (JUICE) (ESA) and Europa Clipper (NASA) missions, which will be launched in the upcoming years to make detailed observations of the giant gaseous planet Jupiter and three of its largest moons (Ganymede, Europa, and Callisto), due to the scarcity… ▽ More The study of thermal properties of frozen salt solutions representative of ice layers in Jovian moons is crucial to support the JUpiter ICy moons Explorer (JUICE) (ESA) and Europa Clipper (NASA) missions, which will be launched in the upcoming years to make detailed observations of the giant gaseous planet Jupiter and three of its largest moons (Ganymede, Europa, and Callisto), due to the scarcity of experimental measurements. Therefore, we have conducted a set of experiments to measure and study the thermal conductivity of macroscopic frozen salt solutions of particular interest in these regions, including sodium chloride (NaCl), magnesium sulphate (MgSO$_4$), sodium sulphate (Na$_2$SO$_4$), and magnesium chloride (MgCl$_2$). Measurements were performed at atmospheric pressure and temperatures from 0 to -70$^{\circ}$C in a climatic chamber. Temperature and calorimetry were measured during the course of the experiments. An interesting side effect of these measurements is that they served to spot phase changes in the frozen salt solutions, even for very low salt concentrations. A small sample of the liquid salt-water solution was set aside for the calorimetry measurements. These experiments and the measurements of thermal conductivity and calorimetry will be valuable to constrain the chemical composition, physical state, and temperature of the icy crusts of Ganymede, Europa, and Callisto. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Journal ref: MNRAS 2021

Self-energy corrected band-gap tuning induced by strain in the hexagonal boron phosphide monolayer

Authors: Jose Mario Galicia Hernandez, J. Guerrero Sanchez, R. Ponce Perez, H. N. Fernandez Escamilla, Gregorio H. Cocoletzi, Noboru Takeuchi

Abstract: We performed a first-principles study of the electronic behavior of a 2D hexagonal boron phosphide monolayer (2D-h-BP). The system was deformed isotropically by applying a simultaneous tensile strain along the a and b crystal axes. We analyzed the band-gap evolution as function of the deformation percentage, ranging from 1% to 8%. Results show that the system behaves as a direct band-gap semicondu… ▽ More We performed a first-principles study of the electronic behavior of a 2D hexagonal boron phosphide monolayer (2D-h-BP). The system was deformed isotropically by applying a simultaneous tensile strain along the a and b crystal axes. We analyzed the band-gap evolution as function of the deformation percentage, ranging from 1% to 8%. Results show that the system behaves as a direct band-gap semiconductor, with the valence band maximum and conduction band minimum located at the K point (1/3, 1/3, 0) of the Brillouin zone. This behavior is unchanged despite the strain application. The band gap underestimation, as computed within the standard DFT, was corrected by applying the G0W0 approach. Trends in the band-gap behavior are the same within both approaches: for low deformation percentages, the band-gap grows linearly with a small slope, and at higher values, it grows very slow with a tendency to achieve saturation. Therefore, the band-gap is less sensitive to tensile strain for deformations near 8%. The origin of this band gap behavior is explained in terms of the projected density of states and charge densities, and it can be attributed to Coulomb interactions, and charge redistributions due to the applied tensile strain. To study the carrier mobility, we computed the electron and hole effective masses, finding high mobility for both carriers. Finally, the stability analysis of each strained system includes the calculation of phonon spectra, to assure the dynamical stability, the computation of elastic constants to evaluate the mechanical stability, and cohesive energies for exploring the thermodynamical stability. Results indicate that the boron phosphide monolayer is stable under the calculated tensile strains. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Comments: Submitted to: Computational Materials Science on May 24th, 2021 (Ms. Ref. No.: COMMAT-D-21-01286) Submitted for revisions on August 21th, 2021 (Ref. No.: COMMAT-D-21-01286R1)

Defining Adaptive Proxemic Zones for Activity-aware Navigation

Authors: Jonatan Gines Clavero, Francisco Martin Rico, Francisco J. Rodriguez-Lera, Jose Miguel Guerrero Hernandez, Vicente Matellan Olivera

Abstract: Many of the tasks that a service robot can perform at home involve navigation skills. In a real world scenario, the navigation system should consider individuals beyond just objects, theses days it is necessary to offer particular and dynamic representation in the scenario in order to enhance the HRI experience. In this paper, we use the proxemic theory to do this representation. The proxemic zone… ▽ More Many of the tasks that a service robot can perform at home involve navigation skills. In a real world scenario, the navigation system should consider individuals beyond just objects, theses days it is necessary to offer particular and dynamic representation in the scenario in order to enhance the HRI experience. In this paper, we use the proxemic theory to do this representation. The proxemic zones are not static. The culture or the context influences them and, if we have this influence into account, we can increase humans' comfort. Moreover, there are collaborative tasks in which these zones take different shapes to allow the task's best performance. This research develops a layer, the social layer, to represent and distribute the proxemics zones' information in a standard way, through a cost map and using it to perform a social navigate task. We have evaluated these components in a simulated scenario, performing different collaborative and human-robot interaction tasks and reducing the personal area invasion in a 32\%. The material developed during this research can be found in a public repository, as well as instructions to facilitate the reproducibility of the results. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Large Enhancement of Critical Current in Superconducting Devices by Gate Voltage

Authors: Mirko Rocci, Dhavala Suri, Akashdeep Kamra, Gilvania Vilela, Norbert Nemes, Jose Luis Martinez, Mar Garcia Hernandez, Jagadeesh S. Moodera

Abstract: The gate-voltage-induced suppression of critical currents in metallic superconductors observed recently [De Simoni et al., Nat. Nanotechnol. 13, 802 (2018)] has raised crucial questions regarding the nature and mechanism of the electric field effect in these systems. Here, we demonstrate an enhancement of up to 30 % in critical current in the type II superconductor NbN, micro- and nano superconduc… ▽ More The gate-voltage-induced suppression of critical currents in metallic superconductors observed recently [De Simoni et al., Nat. Nanotechnol. 13, 802 (2018)] has raised crucial questions regarding the nature and mechanism of the electric field effect in these systems. Here, we demonstrate an enhancement of up to 30 % in critical current in the type II superconductor NbN, micro- and nano superconducting bridges, tunable via a back-gate voltage. Our suggested plausible mechanism of this enhancement in critical current based on surface nucleation and pinning of Abrikosov vortices is consistent with expectations and observations for type-II superconductor films with thicknesses comparable to their coherence length. Furthermore we demonstrate infinite electroresistance and a hysteretic resistance dependence on the applied electric field which could lead to logic and memory applications in a superconductors-based low-dissipation digital computing paradigm. Our work thus provides the first demonstration of an electric field enhancement in the superconducting property in metallic superconductors, constituting a crucial step towards understanding of electric field-effects on the fundamental properties of a superconductor and its exploitation for future technologies. △ Less

Submitted 28 January, 2021; v1 submitted 20 February, 2020; originally announced February 2020.

Non-exponential magnetic relaxation in magnetic nanoparticles for hyperthermia

Authors: I. Gresits, Gy. Thuroczy, O. Sagi, S. Kollarics, G. Csosz, B. G. Markus, N. M. Nemes, M. Garcia Hernandez, F. Simon

Abstract: Magnetic nanoparticle based hyperthermia emerged as a potential tool for treating malignant tumours. The efficiency of the method relies on the knowledge of magnetic properties of the samples; in particular, knowledge of the frequency dependent complex magnetic susceptibility is vital to optimize the irradiation conditions and to provide feedback for material science developments. We study the fre… ▽ More Magnetic nanoparticle based hyperthermia emerged as a potential tool for treating malignant tumours. The efficiency of the method relies on the knowledge of magnetic properties of the samples; in particular, knowledge of the frequency dependent complex magnetic susceptibility is vital to optimize the irradiation conditions and to provide feedback for material science developments. We study the frequency-dependent magnetic susceptibility of an aqueous ferrite suspension for the first time using non-resonant and resonant radiofrequency reflectometry. We identify the optimal measurement conditions using a standard solenoid coil, which is capable of providing the complex magnetic susceptibility up to 150 MHz. The result matches those obtained from a radiofrequency resonator for a few discrete frequencies. The agreement between the two different methods validates our approach. Surprisingly, the dynamic magnetic susceptibility cannot be explained by an exponential magnetic relaxation behavior even when we consider a particle size-dependent distribution of the relaxation parameter. △ Less

Submitted 27 January, 2020; originally announced January 2020.

Comments: 5 pages, 4 figures, plus Supplementary Materials

Journal ref: Journal of Magnetism and Magnetic Materials 526, 167682 (2021)

Lithography-free electrical transport measurements on 2D materials by direct microprobing

Authors: Patricia Gant, Yue Niu, Simon A. Svatek, Nicolás Agraït, Carmen Munuera, Mar García- Hernández, Riccardo Frisenda, David Perez de Lara, Andres Castellanos-Gomez

Abstract: We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the cryst… ▽ More We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by conventional lithographic process. We also show that this method can be used with other 2D materials. △ Less

Submitted 20 May, 2017; originally announced May 2017.

Comments: 7 main text figures + 11 Supp. Info. figures. Total 25 pages

Magnetic and superconducting phase diagrams in ErNi2B2C

Authors: J. A. Galvis, M. Crespo, I. Guillamón, H. Suderow, S. Vieira, M. García Hernández, S. Bud'ko, P. C. Canfield

Abstract: We present measurements of the superconducting upper critical field Hc2(T) and the magnetic phase diagram of the superconductor ErNi2B2C made with a scanning tunneling microscope (STM). The magnetic field was applied in the basal plane of the tetragonal crystal structure. We have found large gapless regions in the superconducting phase diagram of ErNi2B2C, extending between different magnetic tran… ▽ More We present measurements of the superconducting upper critical field Hc2(T) and the magnetic phase diagram of the superconductor ErNi2B2C made with a scanning tunneling microscope (STM). The magnetic field was applied in the basal plane of the tetragonal crystal structure. We have found large gapless regions in the superconducting phase diagram of ErNi2B2C, extending between different magnetic transitions. A close correlation between magnetic transitions and Hc2(T) is found, showing that superconductivity is strongly linked to magnetism. △ Less

Submitted 9 October, 2012; originally announced October 2012.

Comments: 5 pages, 4 figures

Journal ref: Solid State Communications, 152, 12 (2012)

Generic equations for pattern formation in evolving interfaces

Authors: M. Castro, J. Muñoz-García, R. Cuerno, M. García Hernández, L. Vázquez

Abstract: We present a general formalism which allows us to derive the evolution equations describing one-dimensional (1D) and isotropic 2D interfacelike systems, that is based on symmetries, conservation laws, multiple scale arguments, and exploits the relevance of coarsening dynamics. Our approach becomes especially significant in the presence of surface morphological instabilities and allows us to clas… ▽ More We present a general formalism which allows us to derive the evolution equations describing one-dimensional (1D) and isotropic 2D interfacelike systems, that is based on symmetries, conservation laws, multiple scale arguments, and exploits the relevance of coarsening dynamics. Our approach becomes especially significant in the presence of surface morphological instabilities and allows us to classify the most relevant nonlinear terms in the continuum description of these systems. The formalism applies to systems ranging from eroded nanostructures to macroscopic pattern formation. In particular, we show the validity of the theory for novel experiments on ion plasma erosion. △ Less

Submitted 10 May, 2007; originally announced May 2007.

Journal ref: New Journal of Physics. Vol 9. 102. (2007)