Showing 1–30 of 30 results for author: Herbst, R

Development of RFSoC-based direct sampling highly multiplexed microwave SQUID readout for future CMB and submillimeter surveys

Authors: Chao Liu, Zeeshan Ahmed, Shawn W. Henderson, Ryan Herbst, Larry Ruckman, Thomas Satterthwaite

Abstract: The SLAC Microresonator Radio Frequency (SMuRF) electronics is being deployed as the readout for the Cosmic Microwave Background (CMB) telescopes of the Simons Observatory (SO). A Radio Frequency System-on-Chip (RFSoC) based readout of microwave frequency resonator based cryogenic sensors is under development at SLAC as an upgrade path for SMuRF with simplified RF hardware, a more compact footprin… ▽ More The SLAC Microresonator Radio Frequency (SMuRF) electronics is being deployed as the readout for the Cosmic Microwave Background (CMB) telescopes of the Simons Observatory (SO). A Radio Frequency System-on-Chip (RFSoC) based readout of microwave frequency resonator based cryogenic sensors is under development at SLAC as an upgrade path for SMuRF with simplified RF hardware, a more compact footprint, and lower total power consumption. The high-speed integrated data converters and digital data path in RFSoC enable direct RF sampling without analog up and down conversion for RF frequencies up to 6 GHz. A comprehensive optimization and characterization study has been performed for direct RF sampling for microwave SQUID multiplexers, which covers noise level, RF dynamic range, and linearity using a prototype implementation. The SMuRF firmware, including the implementation of closed-loop tone tracking, has been ported to the RFSoC platform and interfaced with the quadrature mixers for digital up and down conversion in the data converter data path to realize a full microwave SQUID multiplexer readout. In this paper, a selection of the performance characterization results of direct RF sampling for microwave SQUID multiplexer readout will be summarized and compared with science-driven requirements. Preliminary results demonstrating the read out of cryogenic sensors using the prototype system will also be presented here. We anticipate our new RFSoC-based SMuRF system will be an enabling readout for on-going and future experiments in astronomy and cosmology, which rely on large arrays of cryogenic sensors to achieve their science goals. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Direct RF Sampling based LLRF Control System for C-band Linear Accelerator

Authors: C. Liu, R. Herbst, B. Hong, L. Ruckman, E. A. Nanni

Abstract: Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operat… ▽ More Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operated at 5.712 GHz without any analogue mixers, which can significantly simplify the system architecture. The data converters sample RF signals in higher order Nyquist zones and then up or down convert digitally by the integrated data path in RFSoC. The closed-loop feedback control firmware implemented in FPGA integrated in RFSoC can process the base-band signal from the ADC data path and calculate the updated phase and amplitude to be up-mixed by the DAC data path. We have developed a C-band LLRF control RFSoC platform with direct RF sampling, which targets Cool Copper Collider (C3) and other C or S band LINAC research and development projects. In this paper, the architecture of the platform will be described. We have optimized the configuration of the data converter and characterized performance of them with RF pulses. The test results for some of the key performance parameters for the LLRF platform with our custom solid-state amplifier, such as phase and amplitude stability, will be discussed in this paper. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Embedded FPGA Developments in 130nm and 28nm CMOS for Machine Learning in Particle Detector Readout

Authors: Julia Gonski, Aseem Gupta, Haoyi Jia, Hyunjoon Kim, Lorenzo Rota, Larry Ruckman, Angelo Dragone, Ryan Herbst

Abstract: Embedded field programmable gate array (eFPGA) technology allows the implementation of reconfigurable logic within the design of an application-specific integrated circuit (ASIC). This approach offers the low power and efficiency of an ASIC along with the ease of FPGA configuration, particularly beneficial for the use case of machine learning in the data pipeline of next-generation collider experi… ▽ More Embedded field programmable gate array (eFPGA) technology allows the implementation of reconfigurable logic within the design of an application-specific integrated circuit (ASIC). This approach offers the low power and efficiency of an ASIC along with the ease of FPGA configuration, particularly beneficial for the use case of machine learning in the data pipeline of next-generation collider experiments. An open-source framework called "FABulous" was used to design eFPGAs using 130 nm and 28 nm CMOS technology nodes, which were subsequently fabricated and verified through testing. The capability of an eFPGA to act as a front-end readout chip was assessed using simulation of high energy particles passing through a silicon pixel sensor. A machine learning-based classifier, designed for reduction of sensor data at the source, was synthesized and configured onto the eFPGA. A successful proof-of-concept was demonstrated through reproduction of the expected algorithm result on the eFPGA with perfect accuracy. Further development of the eFPGA technology and its application to collider detector readout is discussed. △ Less

Submitted 2 July, 2024; v1 submitted 26 April, 2024; originally announced April 2024.

Comments: 16 pages, 12 figures

Solving the Regge-Wheeler and Teukolsky equations: supervised vs. unsupervised physics-informed neural networks

Authors: Alan S. Cornell, Sheldon R. Herbst, Hajar Noshad, Anele M. Ncube

Abstract: Expanding on the research on physics-informed neural networks (PINNs) to solve the eigenvalue problems in black hole (BH) perturbation theory, the supervised learning approach was investigated to solve the Regge-Wheeler and Teukolsky equations governing gravitational perturbations of Schwarzschild and Kerr BHs. Previous works have applied unsupervised PINNs to compute quasinormal mode frequencies,… ▽ More Expanding on the research on physics-informed neural networks (PINNs) to solve the eigenvalue problems in black hole (BH) perturbation theory, the supervised learning approach was investigated to solve the Regge-Wheeler and Teukolsky equations governing gravitational perturbations of Schwarzschild and Kerr BHs. Previous works have applied unsupervised PINNs to compute quasinormal mode frequencies, i.e. the discrete spectra of eigenvalues that satisfy the BH perturbation equations; however, that was limited to only the zeroth and first overtone (i.e. n = 0, 1). In this paper, supervised learning is used to compute higher overtones with approximation errors accentuated primarily by the input data rather than the PINNs themselves. Our results show the ability of PINNs to approximate overtones up to the limits set by the input data, which concurs with the universal approximation theory of neural networks. △ Less

Submitted 17 February, 2024; originally announced February 2024.

Comments: 22 pages, 3 figures

End-to-End Modeling of the TDM Readout System for CMB-S4

Authors: David C. Goldfinger, Zeeshan Ahmed, Darcy R. Barron, W. Bertrand Doriese, Malcolm Durkin, Jeffrey P. Filippini, Gunther Haller, Shawn W. Henderson, Ryan Herbst, Johannes Hubmayr, Kent Irwin, Ben Reese, Leonid Sapozhnikov, Keith L. Thompson, Joel Ullom, Michael R. Vissers

Abstract: The CMB-S4 experiment is develo** next-generation ground-based microwave telescopes to observe the Cosmic Microwave Background with unprecedented sensitivity. This will require an order of magnitude increase in the 100 mK detector count, which in turn increases the demands on the readout system. The CMB-S4 readout will use time division multiplexing (TDM), taking advantage of faster switches and… ▽ More The CMB-S4 experiment is develo** next-generation ground-based microwave telescopes to observe the Cosmic Microwave Background with unprecedented sensitivity. This will require an order of magnitude increase in the 100 mK detector count, which in turn increases the demands on the readout system. The CMB-S4 readout will use time division multiplexing (TDM), taking advantage of faster switches and amplifiers in order to achieve an increased multiplexing factor. To facilitate the design of the new readout system, we have developed a model that predicts the bandwidth and noise performance of this circuity and its interconnections. This is then used to set requirements on individual components in order to meet the performance necessary for the full system. We present an overview of this model and compare the model results to the performance of both legacy and prototype readout hardware. △ Less

Submitted 17 November, 2023; v1 submitted 7 November, 2023; originally announced November 2023.

Comments: This manuscript was submitted to the Journal of Low Temperature Physics as part of the special issue "LTD20", supporting the conference contribution RP-005

Higher Order Nyquist Zone Sampling with RFSoC Data Converters for Astronomical and High Energy Physics Readout Systems

Authors: Chao Liu, Zeeshan Ahmed, Shawn W. Henderson, Ryan Herbst, Larry Ruckman

Abstract: From generation to generation, the maximum RF frequency and sampling rate of the integrated data converters in RF system-on-chip (RFSoC) family devices from Xilinx increases significantly. With the integrated digital mixers and up and down conversion blocks in the datapaths of the data converters, those RFSoC devices offer the capability for implementing a full readout system of ground and space-b… ▽ More From generation to generation, the maximum RF frequency and sampling rate of the integrated data converters in RF system-on-chip (RFSoC) family devices from Xilinx increases significantly. With the integrated digital mixers and up and down conversion blocks in the datapaths of the data converters, those RFSoC devices offer the capability for implementing a full readout system of ground and space-based telescopes and detectors across the electromagnetic spectrum within the devices with minimum or no analog mixing circuit. In this paper, we present the characterization results for the the data converters sampling at higher orders of Nyquist zones to extend the frequency range covered for our targeted readout systems of microwave-frequency resonator-based cryogenic detector and multiplexer systems and other astronomical and high-energy physics instrumentation applications, such as, axion search and dark matter detection. The initial evaluation of the data converters operating higher order Nyquist zones covers two-tones and comb of tones tests to address the concerns in the RF inter-modulation distortion, which is the key performance index for our targeted applications. The characterization of the data converters is performed in the bandwidth of 4-6 GHz and results meet our requirements. The settings and operating strategies of the data converters for our targeted applications will be summarised. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Evaluating Direct RF Sampling Performance for RFSoC-based Radio-frequency Astronomy Receivers

Authors: Chao Liu, Larry Ruckman, Ryan Herbst

Abstract: As the maximum RF input and output frequencies of the integrated data converters in RFSoC increase, it becomes practical to digitize and synthesize RF signals in the majority of C band directly without analogue up and down mixing circuits. The elimination of the mixer circuits can significantly simplify the architecture of the receivers or readouts for radio astronomy telescopes. For the systems w… ▽ More As the maximum RF input and output frequencies of the integrated data converters in RFSoC increase, it becomes practical to digitize and synthesize RF signals in the majority of C band directly without analogue up and down mixing circuits. The elimination of the mixer circuits can significantly simplify the architecture of the receivers or readouts for radio astronomy telescopes. For the systems with large bandwidth or high channel counts, direct sampling can dramatically reduce the size and cost of overall system. This paper with focus on summarising part of the preliminary characterization results for direct sampling with RFSoC data converters in higher order Nyquist zones. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Implementation of a framework for deploying AI inference engines in FPGAs

Authors: Ryan Herbst, Ryan Coffee, Nathan Fronk, Kukhee Kim, Kuktae Kim, Larry Ruckman, J. J. Russell

Abstract: The LCLS2 Free Electron Laser FEL will generate xray pulses to beamline experiments at up to 1Mhz These experimentals will require new ultrahigh rate UHR detectors that can operate at rates above 100 kHz and generate data throughputs upwards of 1 TBs a data velocity which requires prohibitively large investments in storage infrastructure Machine Learning has demonstrated the potential to digest la… ▽ More The LCLS2 Free Electron Laser FEL will generate xray pulses to beamline experiments at up to 1Mhz These experimentals will require new ultrahigh rate UHR detectors that can operate at rates above 100 kHz and generate data throughputs upwards of 1 TBs a data velocity which requires prohibitively large investments in storage infrastructure Machine Learning has demonstrated the potential to digest large datasets to extract relevant insights however current implementations show latencies that are too high for realtime data reduction objectives SLAC has endeavored on the creation of a software framework which translates MLs structures for deployment on Field Programmable Gate Arrays FPGAs deployed at the Edge of the data chain close to the instrumentation This framework leverages ** the maximum latency constrained to the needs of the experiment Our framework is designed to ensure the RTL implementation of the network layers supporting full redeployment of weights and biases without requiring resynthesis after training The ability to reduce the precision of the implemented networks through quantization is necessary to optimize the use of both DSP and memory resources in the FPGA We currently have a preliminary version of the toolset and are experimenting with both general purpose example networks and networks being designed for specific LCLS2 experiments. △ Less

Submitted 30 May, 2023; originally announced May 2023.

Comments: 15 pages, 1 figure 2 tables

Searching for Prompt and Long-Lived Dark Photons in Electro-Produced $e^+e^-$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondi, S. Boyarinov, C. Bravo, S. Bueltmann, P. Butti, V. D. Burkert, D. Calvo, T. Cao, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, M. Diamond, R. Dupre, H. Egiyan , et al. (59 additional authors not shown)

Abstract: The Heavy Photon Search experiment (HPS) at the Thomas Jefferson National Accelerator Facility searches for electro-produced dark photons. We report results from the 2016 Engineering Run consisting of 10608/nb of data for both the prompt and displaced vertex searches. A search for a prompt resonance in the $e^+e^-$ invariant mass distribution between 39 and 179 MeV showed no evidence of dark photo… ▽ More The Heavy Photon Search experiment (HPS) at the Thomas Jefferson National Accelerator Facility searches for electro-produced dark photons. We report results from the 2016 Engineering Run consisting of 10608/nb of data for both the prompt and displaced vertex searches. A search for a prompt resonance in the $e^+e^-$ invariant mass distribution between 39 and 179 MeV showed no evidence of dark photons above the large QED background, limiting the coupling of ε^2 {\geq} 10^-5, in agreement with previous searches. The search for displaced vertices showed no evidence of excess signal over background in the masses between 60 and 150 MeV, but had insufficient luminosity to limit canonical heavy photon production. This is the first displaced vertex search result published by HPS. HPS has taken high-luminosity data runs in 2019 and 2021 that will explore new dark photon phase space. △ Less

Submitted 12 July, 2023; v1 submitted 20 December, 2022; originally announced December 2022.

Comments: 28 pages, 46 figures

Report number: JLAB-PHY-23-3738

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

SLAC Microresonator RF (SMuRF) Electronics: A tone-tracking readout system for superconducting microwave resonator arrays

Authors: Cyndia Yu, Zeeshan Ahmed, Josef C. Frisch, Shawn W. Henderson, Max Silva-Feaver, Kam Arnold, David Brown, Jake Connors, Ari J. Cukierman, J. Mitch D'Ewart, Bradley J. Dober, John E. Dusatko, Gunther Haller, Ryan Herbst, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Chao-Lin Kuo, John A. B. Mates, Larry Ruckman, Joel Ullom, Leila Vale, Daniel D. Van Winkle, Jesus Vasquez, Edward Young

Abstract: We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID multiplexers ($μ$mux) or microwave kinetic inductance detectors (MKIDs). Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arr… ▽ More We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID multiplexers ($μ$mux) or microwave kinetic inductance detectors (MKIDs). Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4-8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. We focus in particular on the case of large channel count, low bandwidth applications, but the system has been easily reconfigured for high bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 28 pages, 25 figures, + references. Comments welcome!

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

Authors: D. R. Barron, Z. Ahmed, J. Aguilar, A. J. Anderson, C. F. Baker, P. S. Barry, J. A. Beall, A. N. Bender, B. A. Benson, R. W. Besuner, T. W. Cecil, C. L. Chang, S. C. Chapman, G. E. Chesmore, G. Derylo, W. B. Doriese, S. M. Duff, T. Elleflot, J. P. Filippini, B. Flaugher, J. G. Gomez, P. K. Grimes, R. Gualtieri, I. Gullett, G. Haller , et al. (25 additional authors not shown)

Abstract: We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental… ▽ More We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Smart sensors using artificial intelligence for on-detector electronics and ASICs

Authors: Gabriella Carini, Grzegorz Deptuch, Jennet Dickinson, Dionisio Doering, Angelo Dragone, Farah Fahim, Philip Harris, Ryan Herbst, Christian Herwig, ** Huang, Soumyajit Mandal, Cristina Mantilla Suarez, Allison McCarn Deiana, Sandeep Miryala, F. Mitchell Newcomer, Benjamin Parpillon, Veljko Radeka, Dylan Rankin, Yihui Ren, Lorenzo Rota, Larry Ruckman, Nhan Tran

Abstract: Cutting edge detectors push sensing technology by further improving spatial and temporal resolution, increasing detector area and volume, and generally reducing backgrounds and noise. This has led to a explosion of more and more data being generated in next-generation experiments. Therefore, the need for near-sensor, at the data source, processing with more powerful algorithms is becoming increasi… ▽ More Cutting edge detectors push sensing technology by further improving spatial and temporal resolution, increasing detector area and volume, and generally reducing backgrounds and noise. This has led to a explosion of more and more data being generated in next-generation experiments. Therefore, the need for near-sensor, at the data source, processing with more powerful algorithms is becoming increasingly important to more efficiently capture the right experimental data, reduce downstream system complexity, and enable faster and lower-power feedback loops. In this paper, we discuss the motivations and potential applications for on-detector AI. Furthermore, the unique requirements of particle physics can uniquely drive the development of novel AI hardware and design tools. We describe existing modern work for particle physics in this area. Finally, we outline a number of areas of opportunity where we can advance machine learning techniques, codesign workflows, and future microelectronics technologies which will accelerate design, performance, and implementations for next generation experiments. △ Less

Submitted 27 April, 2022; originally announced April 2022.

Comments: Contribution to Snowmass 2021; 27 pages, 6 figures

Enabling Capabilities for Infrastructure and Workforce in Electronics and ASICs

Authors: M. Artuso, C. Grace, T. Heim, A. Dragone, R. Herbst, L. Rota, G. Carini, G. Deptuch, M. Newcomer, K. Flood

Abstract: The impressive progress in data rate capabilities, pattern recognition, and spatial resolution of current detectors in experimental particle physics has been possible thanks to the availability of sophisticated analog processors combined with complex digital signal processors implemented in custom made front end ASICs. The demands in terms of performance and increasingly smaller feature sizes are… ▽ More The impressive progress in data rate capabilities, pattern recognition, and spatial resolution of current detectors in experimental particle physics has been possible thanks to the availability of sophisticated analog processors combined with complex digital signal processors implemented in custom made front end ASICs. The demands in terms of performance and increasingly smaller feature sizes are significant. In order to meet these instrumentation challenges, we need to educate and retain a skilled work force, as well as aggregate design tools and acquired knowledge. We propose a multifaceted initiative to ensure that these needs are met. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Comments: Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

The Heavy Photon Search Experiment

Authors: Nathan Baltzell, Marco Battaglieri, Mariangela Bondi, Sergei Boyarinov, Cameron Bravo, Stephen Bueltmann, Volker Burkert, Pierfrancesco Butti, Tongtong Cao, Massimo Carpinelli, Andrea Celentano, Gabriel Charles, Chris Cuevas, Annalisa D'Angelo, Domenico D'Urso, Natalia Dashyan, Marzio De Napoli, Raffaella De Vita, Alexandre Deur, Miriam Diamond, Raphael Dupre, Rouven Essig, Vitaliy Fadeyev, R. Clive Field, Alessandra Filippi , et al. (37 additional authors not shown)

Abstract: The Heavy Photon Search (HPS) experiment is designed to search for a new vector boson $A^\prime$ in the mass range of 20 MeV/$c^2$ to 220 MeV/$c^2$ that kinetically mixes with the Standard Model photon with couplings $ε^2 >10^{-10}$. In addition to the general importance of exploring light, weakly coupled physics that is difficult to probe with high-energy colliders, a prime motivation for this se… ▽ More The Heavy Photon Search (HPS) experiment is designed to search for a new vector boson $A^\prime$ in the mass range of 20 MeV/$c^2$ to 220 MeV/$c^2$ that kinetically mixes with the Standard Model photon with couplings $ε^2 >10^{-10}$. In addition to the general importance of exploring light, weakly coupled physics that is difficult to probe with high-energy colliders, a prime motivation for this search is the possibility that sub-GeV thermal relics constitute dark matter, a scenario that requires a new comparably light mediator, where models with a hidden $U(1)$ gauge symmetry, a "dark", "hidden sector", or "heavy" photon, are particularly attractive. HPS searches for visible signatures of these heavy photons, taking advantage of their small coupling to electric charge to produce them via a process analogous to bremsstrahlung in a fixed target and detect their subsequent decay to $\mathrm{e}^+ \mathrm{e}^-$ pairs in a compact spectrometer. In addition to searching for $\mathrm{e}^+ \mathrm{e}^-$ resonances atop large QED backgrounds, HPS has the ability to precisely measure decay lengths, resulting in unique sensitivity to dark photons, as well as other long-lived new physics. After completion of the experiment and operation of engineering runs in 2015 and 2016 at the JLab CEBAF, physics runs in 2019 and 2021 have provided datasets that are now being analyzed to search for dark photons and other new phenomena. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

Snowmass 2021 CMB-S4 White Paper

Authors: Kevork Abazajian, Arwa Abdulghafour, Graeme E. Addison, Peter Adshead, Zeeshan Ahmed, Marco Ajello, Daniel Akerib, Steven W. Allen, David Alonso, Marcelo Alvarez, Mustafa A. Amin, Mandana Amiri, Adam Anderson, Behzad Ansarinejad, Melanie Archipley, Kam S. Arnold, Matt Ashby, Han Aung, Carlo Baccigalupi, Carina Baker, Abhishek Bakshi, Debbie Bard, Denis Barkats, Darcy Barron, Peter S. Barry , et al. (331 additional authors not shown)

Abstract: This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:1908.01062, arXiv:1907.04473

Monolithic Active Pixel Sensors on CMOS technologies

Authors: Nicole Apadula, Whitney Armstrong, James Brau, Martin Breidenbach, R. Caputo, Gabriella Carinii, Alberto Collu, Marcel Demarteau, Grzegorz Deptuch, Angelo Dragone, Gabriele Giacomini, Carl Grace, Norman Graf, Leo Greiner, Ryan Herbst, Gunther Haller, Manoj Jadhav, Sylvester Joosten, Christopher J. Kenney, C. Kierans, Jihee Kim, Thomas Markiewicz, Yuan Mei, Jessica Metcalfe, Zein-Eddine Meziani , et al. (15 additional authors not shown)

Abstract: Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are… ▽ More Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are a promising technology for high-granularity and light detectors. In this paper we review 1) the requirements on MAPS for trackers and electromagnetic calorimeters (ECal) at future colliders experiments, 2) the ongoing efforts towards dedicated MAPS for the Electron-Ion Collider (EIC) at BNL, for which the EIC Silicon Consortium was already instantiated, and 3) space-born applications for MeV $γ$-ray experiments with MAPS based trackers (AstroPix). △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 25 pages, 18 figures, contribution to Snowmass 2021

The EXO-200 detector, part II: Auxiliary Systems

Authors: N. Ackerman, J. Albert, M. Auger, D. J. Auty, I. Badhrees, P. S. Barbeau, L. Bartoszek, E. Baussan, V. Belov, C. Benitez-Medina, T. Bhatta, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, R. Conley, S. Cook, M. Coon, W. Craddock, A. Craycraft, W. Cree, T. Daniels, L. Darroch , et al. (135 additional authors not shown)

Abstract: The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector op… ▽ More The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector operation, including cryogenics, xenon handling, and controls. Novel features of the system were driven by the need to protect the thin-walled detector chamber containing the liquid xenon, to achieve high chemical purity of the Xe, and to maintain thermal uniformity across the detector. △ Less

Submitted 22 October, 2021; v1 submitted 13 July, 2021; originally announced July 2021.

Comments: Manuscript updated in response to JINST reviewer comments

Bridging Data Center AI Systems with Edge Computing for Actionable Information Retrieval

Authors: Zhengchun Liu, Ahsan Ali, Peter Kenesei, Antonino Miceli, Hemant Sharma, Nicholas Schwarz, Dennis Trujillo, Hyunseung Yoo, Ryan Coffee, Naoufal Layad, Jana Thayer, Ryan Herbst, ChunHong Yoon, Ian Foster

Abstract: Extremely high data rates at modern synchrotron and X-ray free-electron laser light source beamlines motivate the use of machine learning methods for data reduction, feature detection, and other purposes. Regardless of the application, the basic concept is the same: data collected in early stages of an experiment, data from past similar experiments, and/or data simulated for the upcoming experimen… ▽ More Extremely high data rates at modern synchrotron and X-ray free-electron laser light source beamlines motivate the use of machine learning methods for data reduction, feature detection, and other purposes. Regardless of the application, the basic concept is the same: data collected in early stages of an experiment, data from past similar experiments, and/or data simulated for the upcoming experiment are used to train machine learning models that, in effect, learn specific characteristics of those data; these models are then used to process subsequent data more efficiently than would general-purpose models that lack knowledge of the specific dataset or data class. Thus, a key challenge is to be able to train models with sufficient rapidity that they can be deployed and used within useful timescales. We describe here how specialized data center AI (DCAI) systems can be used for this purpose through a geographically distributed workflow. Experiments show that although there are data movement cost and service overhead to use remote DCAI systems for DNN training, the turnaround time is still less than 1/30 of using a locally deploy-able GPU. △ Less

Submitted 6 February, 2022; v1 submitted 28 May, 2021; originally announced May 2021.

A Microwave SQUID Multiplexer Optimized for Bolometric Applications

Authors: B. Dober, Z. Ahmed, K. Arnold, D. T. Becker, D. A. Bennett, J. A. Connors, A. Cukierman, J. M. D'Ewart, S. M. Duff, J. E. Dusatko, J. C. Frisch, J. D. Gard, S. W. Henderson, R. Herbst, G. C. Hilton, J. Hubmayr, Y. Li, J. A. B. Mates, H. McCarrick, C. D Reintsema, M. Silva-Feaver, L. Ruckman, J. N. Ullom, L. R. Vale, D. D. Van Winkle , et al. (5 additional authors not shown)

Abstract: A microwave SQUID multiplexer ($μ$MUX) has been optimized for coupling to large arrays of superconducting transition-edge sensor (TES) bolometers. We present the scalable cryogenic multiplexer chip design in a 1820-channel multiplexer configuration for the 4-8 GHz rf band. The key metrics of yield, sensitivity, and crosstalk are determined through measurements of 455 readout channels, which span 4… ▽ More A microwave SQUID multiplexer ($μ$MUX) has been optimized for coupling to large arrays of superconducting transition-edge sensor (TES) bolometers. We present the scalable cryogenic multiplexer chip design in a 1820-channel multiplexer configuration for the 4-8 GHz rf band. The key metrics of yield, sensitivity, and crosstalk are determined through measurements of 455 readout channels, which span 4-5 GHz. The median white-noise level is 45 pA/$\sqrt{\textrm{Hz}}$, evaluated at 2 Hz, with a 1/f knee $\leq$ 20 mHz after common-mode subtraction. The white-noise level decreases the sensitivity of a TES bolometer optimized for detection of the cosmic microwave background at 150 GHz by only 3%. The measured crosstalk between any channel pair is $\leq$ 0.3%. △ Less

Submitted 19 January, 2021; v1 submitted 15 October, 2020; originally announced October 2020.

Comments: 6 pages, 5 figures

Design and performance of a 35-ton liquid argon time projection chamber as a prototype for future very large detectors

Authors: D. L. Adams, M. Baird, G. Barr, N. Barros, A. Blake, E. Blaufuss, A. Booth, D. Brailsford, N. Buchanan, B. Carls, H. Chen, M. Convery, G. De Geronimo, T. Dealtry, R. Dharmapalan, Z. Djurcic, J. Fowler, S. Glavin, R. A. Gomes, M. C. Goodman, M. Graham, L. Greenler, A. Hahn, J. Hartnell, R. Herbst , et al. (49 additional authors not shown)

Abstract: Liquid argon time projection chamber technology is an attractive choice for large neutrino detectors, as it provides a high-resolution active target and it is expected to be scalable to very large masses. Consequently, it has been chosen as the technology for the first module of the DUNE far detector. However, the fiducial mass required for "far detectors" of the next generation of neutrino oscill… ▽ More Liquid argon time projection chamber technology is an attractive choice for large neutrino detectors, as it provides a high-resolution active target and it is expected to be scalable to very large masses. Consequently, it has been chosen as the technology for the first module of the DUNE far detector. However, the fiducial mass required for "far detectors" of the next generation of neutrino oscillation experiments far exceeds what has been demonstrated so far. Scaling to this larger mass, as well as the requirement for underground construction places a number of additional constraints on the design. A prototype 35-ton cryostat was built at Fermi National Acccelerator Laboratory to test the functionality of the components foreseen to be used in a very large far detector. The Phase I run, completed in early 2014, demonstrated that liquid argon could be maintained at sufficient purity in a membrane cryostat. A time projection chamber was installed for the Phase II run, which collected data in February and March of 2016. The Phase II run was a test of the modular anode plane assemblies with wrapped wires, cold readout electronics, and integrated photon detection systems. While the details of the design do not match exactly those chosen for the DUNE far detector, the 35-ton TPC prototype is a demonstration of the functionality of the basic components. Measurements are performed using the Phase II data to extract signal and noise characteristics and to align the detector components. A measurement of the electron lifetime is presented, and a novel technique for measuring a track's position based on pulse properties is described. △ Less

Submitted 2 March, 2020; v1 submitted 18 December, 2019; originally announced December 2019.

Comments: 28 pages, 12 figures, accepted by JINST

Performance of ePix10K, a high dynamic range, gain auto-ranging pixel detector for FELs

Authors: G. Blaj, A. Dragone, C. J. Kenney, F. Abu-Nimeh, P. Caragiulo, D. Doering, M. Kwiatkowski, J. Pines, M. Weaver, S. Boutet, G. Carini, C. -E. Chang, P. Hart, J. Hasi, M. Hayes, R. Herbst, J. Koglin, K. Nakahara, J. Segal, G. Haller

Abstract: ePix10K is a hybrid pixel detector developed at SLAC for demanding free-electron laser (FEL) applications, providing an ultrahigh dynamic range (245 eV to 88 MeV) through gain auto-ranging. It has three gain modes (high, medium and low) and two auto-ranging modes (high-to-low and medium-to-low). The first ePix10K cameras are built around modules consisting of a sensor flip-chip bonded to 4 ASICs,… ▽ More ePix10K is a hybrid pixel detector developed at SLAC for demanding free-electron laser (FEL) applications, providing an ultrahigh dynamic range (245 eV to 88 MeV) through gain auto-ranging. It has three gain modes (high, medium and low) and two auto-ranging modes (high-to-low and medium-to-low). The first ePix10K cameras are built around modules consisting of a sensor flip-chip bonded to 4 ASICs, resulting in 352x384 pixels of 100 $μ$m x 100 $μ$m each. We present results from extensive testing of three ePix10K cameras with FEL beams at LCLS, resulting in a measured noise floor of 245 eV rms, or 67 e$^-$ equivalent noise charge (ENC), and a range of 11000 photons at 8 keV. We demonstrate the linearity of the response in various gain combinations: fixed high, fixed medium, fixed low, auto-ranging high to low, and auto-ranging medium-to-low, while maintaining a low noise (well within the counting statistics), a very low cross-talk, perfect saturation response at fluxes up to 900 times the maximum range, and acquisition rates of up to 480 Hz. Finally, we present examples of high dynamic range x-ray imaging spanning more than 4 orders of magnitude dynamic range (from a single photon to 11000 photons/pixel/pulse at 8 keV). Achieving this high performance with only one auto-ranging switch leads to relatively simple calibration and reconstruction procedures. The low noise levels allow usage with long integration times at non-FEL sources. ePix10K cameras leverage the advantages of hybrid pixel detectors with high production yield and good availability, minimize development complexity through sharing the hardware, software and DAQ development with all other versions of ePix cameras, while providing an upgrade path to 5 kHz, 25 kHz and 100 kHz in three steps over the next few years, matching the LCLS-II requirements. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Comments: 9 pages, 5 figures

Report number: SLAC-PUB-17275

Journal ref: =AIP Conf. Proc. 2054, 060062 (2019)

Search for a Dark Photon in Electro-Produced $e^{+}e^{-}$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondí, S. Boyarinov, S. Bueltmann, V. D. Burkert, D. Calvo, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, R. Dupre, H. Egiyan, L. Elouadrhiri, R. Essig, V. Fadeyev, C. Field , et al. (52 additional authors not shown)

Abstract: The Heavy Photon Search experiment took its first data in a 2015 engineering run using a 1.056 GeV, 50 nA electron beam provided by CEBAF at the Thomas Jefferson National Accelerator Facility, searching for an electro-produced dark photon. Using 1.7 days (1170 nb$^{-1}$) of data, a search for a resonance in the $e^{+}e^{-}$ invariant mass distribution between 19 and 81 MeV/c$^2$ showed no evidence… ▽ More The Heavy Photon Search experiment took its first data in a 2015 engineering run using a 1.056 GeV, 50 nA electron beam provided by CEBAF at the Thomas Jefferson National Accelerator Facility, searching for an electro-produced dark photon. Using 1.7 days (1170 nb$^{-1}$) of data, a search for a resonance in the $e^{+}e^{-}$ invariant mass distribution between 19 and 81 MeV/c$^2$ showed no evidence of dark photon decays above the large QED background, confirming earlier searches and demonstrating the full functionality of the experiment. Upper limits on the square of the coupling of the dark photon to the Standard Model photon are set at the level of 6$\times$10$^{-6}$. In addition, a search for displaced dark photon decays did not rule out any territory but resulted in a reliable analysis procedure that will probe hitherto unexplored parameter space with future, higher luminosity runs. △ Less

Submitted 5 December, 2018; originally announced December 2018.

Comments: 8 pages, Proceedings of the 39th International Conference on High Energy Physics (ICHEP 2018), 4-11 July, 2018, Seoul, Korea

Search for a Dark Photon in Electro-Produced $e^{+}e^{-}$ Pairs with the Heavy Photon Search Experiment at JLab

Authors: P. H. Adrian, N. A. Baltzell, M. Battaglieri, M. Bondí, S. Boyarinov, S. Bueltmann, V. D. Burkert, D. Calvo, M. Carpinelli, A. Celentano, G. Charles, L. Colaneri, W. Cooper, C. Cuevas, A. D'Angelo, N. Dashyan, M. De Napoli, R. De Vita, A. Deur, R. Dupre, H. Egiyan, L. Elouadrhiri, R. Essig, V. Fadeyev, C. Field , et al. (52 additional authors not shown)

Abstract: The Heavy Photon Search experiment took its first data in a 2015 engineering run at the Thomas Jefferson National Accelerator Facility, searching for a prompt, electro-produced dark photon with a mass between 19 and 81 MeV/$c^2$. A search for a resonance in the $e^{+}e^{-}$ invariant mass distribution, using 1.7 days (1170 nb$^{-1}$) of data, showed no evidence of dark photon decays above the larg… ▽ More The Heavy Photon Search experiment took its first data in a 2015 engineering run at the Thomas Jefferson National Accelerator Facility, searching for a prompt, electro-produced dark photon with a mass between 19 and 81 MeV/$c^2$. A search for a resonance in the $e^{+}e^{-}$ invariant mass distribution, using 1.7 days (1170 nb$^{-1}$) of data, showed no evidence of dark photon decays above the large QED background, confirming earlier searches and demonstrating the full functionality of the experiment. Upper limits on the square of the coupling of the dark photon to the Standard Model photon are set at the level of 6$\times$10$^{-6}$. Future runs with higher luminosity will explore new territory. △ Less

Submitted 3 August, 2018; v1 submitted 30 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. D 98, 091101 (2018)

The Heavy Photon Search Test Detector

Authors: Marco Battaglieri, Sergey Boyarinov, Stephen Bueltmann, Volker Burkert, Andrea Celentano, Gabriel Charles, William Cooper, Chris Cuevas, Natalia Dashyan, Raffaella DeVita, Camille Desnault, Alexandre Deur, Hovanes Egiyan, Latifa Elouadrhiri, Rouven Essig, Vitaliy Fadeyev, Clive Field, Arne Freyberger, Yuri Gershtein, Nerses Gevorgyan, Francois-Xavier Girod, Norman Graf, Mathew Graham, Keith Griffioen, Alexander Grillo , et al. (39 additional authors not shown)

Abstract: The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm th… ▽ More The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm that the trigger rates and occupancies are as expected. This paper describes the HPS Test Run apparatus and readout electronics and its performance. In this setting, a heavy photon can be identified as a narrow peak in the e$^+$e$^-$ invariant mass spectrum, above the trident background or as a narrow invariant mass peak with a decay vertex displaced from the production target, so charged particle tracking and vertexing are needed for its detection. In the HPS Test Run, charged particles are measured with a compact forward silicon microstrip tracker inside a dipole magnet. Electromagnetic showers are detected in a PbW0$_{4}$ crystal calorimeter situated behind the magnet, and are used to trigger the experiment and identify electrons and positrons. Both detectors are placed close to the beam line and split top-bottom. This arrangement provides sensitivity to low-mass heavy photons, allows clear passage of the unscattered beam, and avoids the spray of degraded electrons coming from the target. The discrimination between prompt and displaced e$^+$e$^-$ pairs requires the first layer of silicon sensors be placed only 10~cm downstream of the target. The expected signal is small, and the trident background huge, so the experiment requires very large statistics. Accordingly, the HPS Test Run utilizes high-rate readout and data acquisition electronics and a fast trigger to exploit the essentially 100% duty cycle of the CEBAF accelerator at JLab. △ Less

Submitted 4 June, 2015; v1 submitted 23 June, 2014; originally announced June 2014.

Comments: Revised version to match published version, 16 pages, 18 figures, published in Nuclear Instruments and Methods in Physics Research Section A, editor: Per Hansson Adrian

Report number: SLAC-PUB-15999

Journal ref: Nuclear Inst. and Methods in Physics Research, A Volume 777, 21 March 2015, Pages 91-101, ISSN 0168-9002

THGEM-based detectors for sampling elements in DHCAL: laboratory and beam evaluation

Authors: L. Arazi, A. Breskin, R. Chechik, M. Cortesi, M. Pitt, A. Rubin, H. Natal da Luz, J. M. F. dos Santos, C. D. R. Azevedo, D. S. Covita, C. A. B. Oliveira, J. F. C. A. Veloso, M. Breidenbach, D. Freytag, G. Haller, R. Herbst, S. Park, A. White, J. Yu, E. Oliveri

Abstract: We report on the results of an extensive R&D program aimed at the evaluation of Thick-Gas Electron Multipliers (THGEM) as potential active elements for Digital Hadron Calorimetry (DHCAL). Results are presented on efficiency, pad multiplicity and discharge probability of a 10x10 cm2 prototype detector with 1 cm2 readout pads. The detector is comprised of single- or double-THGEM multipliers coupled… ▽ More We report on the results of an extensive R&D program aimed at the evaluation of Thick-Gas Electron Multipliers (THGEM) as potential active elements for Digital Hadron Calorimetry (DHCAL). Results are presented on efficiency, pad multiplicity and discharge probability of a 10x10 cm2 prototype detector with 1 cm2 readout pads. The detector is comprised of single- or double-THGEM multipliers coupled to the pad electrode either directly or via a resistive anode. Investigations employing standard discrete electronics and the KPiX readout system have been carried out both under laboratory conditions and with muons and pions at the CERN RD51 test beam. For detectors having a charge-induction gap, it has been shown that even a ~6 mm thick single-THGEM detector reached detection efficiencies above 95%, with pad-hit multiplicity of 1.1-1.2 per event; discharge probabilities were of the order of 1e-6 - 1e-5 sparks/trigger, depending on the detector structure and gain. Preliminary beam tests with a WELL hole-structure, closed by a resistive anode, yielded discharge probabilities of <2e-6 for an efficiency of ~95%. Methods are presented to reduce charge-spread and pad multiplicity with resistive anodes. The new method showed good prospects for further evaluation of very thin THGEM-based detectors as potential active elements for DHCAL, with competitive performances, simplicity and robustness. Further developments are in course. △ Less

Submitted 8 December, 2011; originally announced December 2011.

Comments: 15 pages, 11 figures, MPGD2011 conference proceeding

Development of Readout Interconnections for the Si-W Calorimeter of SiD

Authors: M. Woods, R. G. Fields, B. Holbrook, R. L. Lander, A. Moskaleva, C. Neher, J. Pasner, M. Tripathi, J. E. Brau, R. E. Frey, D. Strom, M. Breidenbach, D. Freytag, G. Haller, R. Herbst, T. Nelson, S. Schier, B. Schumm

Abstract: The SiD collaboration is develo** a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including o… ▽ More The SiD collaboration is develo** a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including oxidation removal processes, pad surface preparation, solder ball selection and placement, and bond quality assurance. Our results show that solder ball bonding is a promising technique for the Si-W ECAL, and unresolved issues are being addressed. △ Less

Submitted 21 November, 2011; v1 submitted 31 October, 2011; originally announced October 2011.

Comments: 8 pages + title, 6 figures

Observation of Two-Neutrino Double-Beta Decay in Xe-136 with EXO-200

Authors: N. Ackerman, B. Aharmim, M. Auger, D. J. Auty, P. S. Barbeau, K. Barry, L. Bartoszek, E. Beauchamp, V. Belov, C. Benitez-Medina, M. Breidenbach, A. Burenkov, B. Cleveland, R. Conley, E. Conti, J. Cook, S. Cook, A. Coppens, I. Counts, W. Craddock, T. Daniels, M. V. Danilov, C. G. Davis, J. Davis, R. deVoe , et al. (78 additional authors not shown)

Abstract: We report the observation of two-neutrino double-beta decay in Xe-136 with T_1/2 = 2.11 +- 0.04 (stat.) +- 0.21 (sys.) x 10^21 yr. This second order process, predicted by the Standard Model, has been observed for several nuclei but not for Xe-136. The observed decay rate provides new input to matrix element calculations and to the search for the more interesting neutrino-less double-beta decay, th… ▽ More We report the observation of two-neutrino double-beta decay in Xe-136 with T_1/2 = 2.11 +- 0.04 (stat.) +- 0.21 (sys.) x 10^21 yr. This second order process, predicted by the Standard Model, has been observed for several nuclei but not for Xe-136. The observed decay rate provides new input to matrix element calculations and to the search for the more interesting neutrino-less double-beta decay, the most sensitive probe for the existence of Majorana particles and the measurement of the neutrino mass scale. △ Less

Submitted 22 November, 2011; v1 submitted 21 August, 2011; originally announced August 2011.

A Silicon-Tungsten ECal with Integrated Electronics

Authors: R. Frey, J. Brau, M. Breidenbach, D. Freytag, G. Haller, R. Herbst, R. Lander, T. Nelson, V. Radeka, D. Strom, M. Tripathi

Abstract: We summarize recent R&D progress for a silicon-tungsten electromagnetic calorimeter (ECal) with integrated electronics, designed to meet the ILC physics requirements. We summarize recent R&D progress for a silicon-tungsten electromagnetic calorimeter (ECal) with integrated electronics, designed to meet the ILC physics requirements. △ Less

Submitted 11 October, 2007; originally announced October 2007.

Comments: 4 pages, 4 figures To appear in Proc. of LCWS07, DESY, June 2007

Journal ref: eConf C0705302:Cal16,2007

Systematic study of trace radioactive impurities in candidate construction materials for EXO-200

Authors: D. S. Leonard, P. Grinberg, P. Weber, E. Baussan, Z. Djurcic, G. Keefer, A. Piepke, A. Pocar, J. -L. Vuilleumier, J. -M. Vuilleumier, D. Akimov, A. Bellerive, M. Bowcock, M. Breidenbach, A. Burenkov, R. Conley, W. Craddock, M. Danilov, R. DeVoe, M. Dixit, A. Dolgolenko, I. Ekchtout, W. Fairbank Jr., J. Farine, P. Fierlinger , et al. (32 additional authors not shown)

Abstract: The Enriched Xenon Observatory (EXO) will search for double beta decays of 136Xe. We report the results of a systematic study of trace concentrations of radioactive impurities in a wide range of raw materials and finished parts considered for use in the construction of EXO-200, the first stage of the EXO experimental program. Analysis techniques employed, and described here, include direct gamma… ▽ More The Enriched Xenon Observatory (EXO) will search for double beta decays of 136Xe. We report the results of a systematic study of trace concentrations of radioactive impurities in a wide range of raw materials and finished parts considered for use in the construction of EXO-200, the first stage of the EXO experimental program. Analysis techniques employed, and described here, include direct gamma counting, alpha counting, neutron activation analysis, and high-sensitivity mass spectrometry. △ Less

Submitted 4 August, 2008; v1 submitted 28 September, 2007; originally announced September 2007.

Comments: 32 pages, 6 figures. Expanded introduction, added missing table entry. Accepted for publication in Nucl. Instrum. Meth. A

Journal ref: Nucl.Instrum.Meth.A591:490-509,2008