-
Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel
Authors:
Andrew J. Breen,
Leigh T. Stephenson,
Binhan Sun,
Yujiao Li,
Olga Kasian,
Dierk Raabe,
Michael Herbig,
Baptiste Gault
Abstract:
Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano…
▽ More
Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, ε=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trap** sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Quantification challenges for atom probe tomography of hydrogen and deuterium in Zircaloy-4
Authors:
Isabelle Mouton,
Andrew J. Breen,
Siyang Wang,
Yanhong Chang,
Agnieszka Szczepaniak,
Paraskevas Kontis,
Leigh T. Stephenson,
Dierk Raabe,
M. Herbig,
T. Ben Britton,
Baptiste Gault
Abstract:
Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and d…
▽ More
Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and deuterium under the same conditions to form large hydrides and deuterides. Our results from a Zr hydride and a Zr deuteride highlight challenges associated to accurate quantification of hydrogen and deuterium, in particular associated to the overlap of peaks at low mass-to-charge ratio and of hydrogen/deuterium containing molecular ions. We discuss possible ways to ensure that appropriate information is extracted from APT analysis of hydrogen in a zirconium alloy systems that is important for nuclear power.
△ Less
Submitted 3 February, 2019; v1 submitted 10 September, 2018;
originally announced September 2018.
-
Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
Authors:
A. J. Breen,
I. Mouton,
W. Lu,
S. Wang,
A. Szczepaniak,
P. Kontis,
L. T. Stephenson,
Y. Chang,
A. K. da Silva,
C. Liebscher,
D. Raabe,
T. B. Britton,
M. Herbig,
B. Gault
Abstract:
Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HC…
▽ More
Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HCP ζphase deuteride (ZrD0.25-0.5) has been observed. Furthermore, Sn is rejected from the deuterides and segregates to the deuteride/α-Zr reaction front.
△ Less
Submitted 28 June, 2018; v1 submitted 26 June, 2018;
originally announced June 2018.
-
Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale
Authors:
Yanhong Chang,
Andrew J. Breen,
Zahra Tarzimoghadam,
Philipp Kürnsteiner,
Hazel Gardner,
Abigail Ackerman,
Anna Radecka,
Paul A. J. Bagot,
Wenjun Lu,
Tong Li,
Eric A. Jägle,
Michael Herbig,
Leigh T. Stephenson,
Michael P. Moody,
David Rugg,
David Dye,
Dirk Ponge,
Dierk Raabe,
Baptiste Gault
Abstract:
Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with…
▽ More
Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with the focused-ion beam, we show formation of Ti-hydrides along α grain boundaries and α/\b{eta} phase boundaries in commercial pure Ti and α+\b{eta} binary model alloys. No hydrides are observed in the α phase in alloys with Al addition or quenched-in Mo supersaturation.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
Ab initio explanation of disorder and off-stoichiometry in Fe-Mn-Al-C kappa carbides
Authors:
P. Dey,
R. Nazarov,
B. Dutta,
M. J. Yao,
M. Herbig,
M. Friák,
T. Hickel,
D. Raabe,
J. Neugebauer
Abstract:
Carbides play a central role for the strength and ductility in many materials. Simulating the impact of these precipitates on the mechanical performance requires the knowledge about their atomic configuration. In particular, the C content is often observed to substantially deviate from the ideal stoichiometric composition. In the present work, we focus on Fe-Mn-Al-C steels, for which we determined…
▽ More
Carbides play a central role for the strength and ductility in many materials. Simulating the impact of these precipitates on the mechanical performance requires the knowledge about their atomic configuration. In particular, the C content is often observed to substantially deviate from the ideal stoichiometric composition. In the present work, we focus on Fe-Mn-Al-C steels, for which we determined the composition of the nano-sized kappa carbides (Fe,Mn)3AlC by atom probe tomography (APT) in comparison to larger precipitates located in grain boundaries. Combining density functional theory with thermodynamic concepts, we first determine the critical temperatures for the presence of chemical and magentic disorder in these carbides. Secondly, the experimentally observed reduction of the C content is explained as a compromise between the gain in chemical energy during partitioning and the elastic strains emerging in coherent microstructures.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
