-
Odd Dipole Screening in Radial Inflation
Authors:
Yang Fu,
H. George E. Hentschel,
Pawandeep Kaur,
Avanish Kumar,
Itamar Procaccia
Abstract:
The inflation of an inner radial (or spherical) cavity in an amorphous solids confined in a disk (or a sphere), served as a fruitful case model for studying the effects of plastic deformations on the mechanical response. It was shown that when the field associated with Eshelby quadrupolar charges is non-uniform, the displacement field is riddled with dipole charges that screen elasticity, reminisc…
▽ More
The inflation of an inner radial (or spherical) cavity in an amorphous solids confined in a disk (or a sphere), served as a fruitful case model for studying the effects of plastic deformations on the mechanical response. It was shown that when the field associated with Eshelby quadrupolar charges is non-uniform, the displacement field is riddled with dipole charges that screen elasticity, reminiscent of Debye monopoles screening in electrostatics. In this paper we look deeper into the screening phenomenon, taking into account the consequences of irreversibility that are associated with the breaking of Chiral symmetry. We consider the equations for the displacement field with the presence of "Odd Dipole Screening", solve them analytically and compare with numerical simulations. Suggestions how to test the theory in experiments are provided.
△ Less
Submitted 27 June, 2024; v1 submitted 23 June, 2024;
originally announced June 2024.
-
Dynamic Screening by Plasticity in Amorphous Solids
Authors:
H. George E. Hentschel,
Anna Pomyalov,
Itamar Procaccia,
Oran Szachter
Abstract:
In recent work, it was shown that elasticity theory can break down in amorphous solids subjected to nonuniform {\em static} loads. The elastic fields are screened by geometric dipoles; these stem from gradients of the quadrupole field associated with plastic responses. Here we study the dynamical responses induced by {\em oscillatory} loads. The required modification to classical elasticity is des…
▽ More
In recent work, it was shown that elasticity theory can break down in amorphous solids subjected to nonuniform {\em static} loads. The elastic fields are screened by geometric dipoles; these stem from gradients of the quadrupole field associated with plastic responses. Here we study the dynamical responses induced by {\em oscillatory} loads. The required modification to classical elasticity is described. Exact solutions for the displacement field in circular geometry are presented, demonstrating that dipole screening results in essential departures from the expected predictions of classical elasticity theory. Numerical simulations are conducted to validate the theoretical predictions and to delineate their range of validity.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
The Eshelby problem in amorphous solids
Authors:
H. George E. Hentschel,
Avanish Kumar,
Itamar Procaccia,
Saikat Roy
Abstract:
The ``Eshelby problem" refers to the response of a 2-dimensional elastic sheet to cutting away a circle, deforming it into an ellipse, and pushing it back. The resulting response is dominated by the so-called ``Eshelby Kernel" which was derived for purely elastic (infinite) material, but has been employed extensively to model the redistribution of stress after plastic events in amorphous solids wi…
▽ More
The ``Eshelby problem" refers to the response of a 2-dimensional elastic sheet to cutting away a circle, deforming it into an ellipse, and pushing it back. The resulting response is dominated by the so-called ``Eshelby Kernel" which was derived for purely elastic (infinite) material, but has been employed extensively to model the redistribution of stress after plastic events in amorphous solids with finite boundaries. Here we discuss and solve the Eshelby problem directly for amorphous solids, taking into account possible screening effects and realistic boundary conditions. We find major modifications compared to the classical Eshelby solution. These modification are needed for modeling correctly the spatial responses to plastic events in amorphous solids.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Creep failure of amorphous solids under tensile stress
Authors:
Bhanu Prasad Bhowmik,
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
Applying constant tensile stress to a piece of amorphous solid results in a slow extension, followed by an eventual rapid mechanical collapse. This "creep" process is of paramount engineering concern, and as such was the subject of study in a variety of materials, for more than a century. Predictive theories for $τ_w$, the expected time of collapse, are lacking, mainly due to its dependence on a b…
▽ More
Applying constant tensile stress to a piece of amorphous solid results in a slow extension, followed by an eventual rapid mechanical collapse. This "creep" process is of paramount engineering concern, and as such was the subject of study in a variety of materials, for more than a century. Predictive theories for $τ_w$, the expected time of collapse, are lacking, mainly due to its dependence on a bewildering variety of parameters, including temperature, system size, tensile force, but also the detailed microscopic interactions between constituents. The complex dependence of the collapse time on all the parameters is discussed below, using simulations of strip of amorphous material. Different scenarios are observed for ductile and brittle materials, resulting in serious difficulties in creating an all-encompassing theory that could offer safety measures for given conditions. A central aim of this paper is to employ scaling concepts, to achieve data collapse for the probability distribution function (pdf) of $\ln{τ_w}$. The scaling ideas result in a universal function which provides a prediction of the pdf of $\ln{τ_w}$ for out-of-sample systems, from measurements at other values of these parameters. The predictive power of the scaling theory is demonstrated for both ductile and brittle systems. Finally, we present a derivation of universal scaling function for brittle materials. The ductile case appears to be due to a plastic necking instability and is left for future research.
△ Less
Submitted 7 June, 2022;
originally announced June 2022.
-
Scaling Theory for Wöhler plots in amorphous solids under cyclic forcing
Authors:
Bhanu Prasad Bhowmik,
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
In mechanical engineering Wöhler plots serve to measure the average number of load cycles before materials break, as a function of the maximal stress in each cycle. Although such plots are prevalent in engineering for more than 150 years, their theoretical understanding is lacking. Recently a scaling theory of Wöhler plots in the context of cyclic bending was offered [1]. Here we elaborate further…
▽ More
In mechanical engineering Wöhler plots serve to measure the average number of load cycles before materials break, as a function of the maximal stress in each cycle. Although such plots are prevalent in engineering for more than 150 years, their theoretical understanding is lacking. Recently a scaling theory of Wöhler plots in the context of cyclic bending was offered [1]. Here we elaborate further on cyclic bending and extend the considerations to cyclic tensile loads on an amorphous strip of material; the scaling theory applies to both types of cyclic loading equally well. On the basis of atomistic simulations we conclude that the crucial quantities to focus on are the accumulated damage and the average damage per cycle. The dependence of these quantities on the loading determines the statistics of the number of cycles to failure. Finally we consider the probability distribution functions of the number of cycles to failure and demonstrate that the scaling theory allows prediction of these distributions at one value of the forcing amplitude from measurements and another value.
△ Less
Submitted 26 September, 2021;
originally announced January 2022.
-
Fatigue and Collapse of Cyclically Bent Strip of Amorphous Solid
Authors:
Bhanu Prasad Bhowmik,
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
Fatigue caused by cyclic bending of a piece of material, resulting in its mechanical failure, is a phenomenon that had been studied for ages by engineers and physicists alike. In this Letter we study such fatigue in a strip of athermal amorphous solid. On the basis of atomistic simulations we conclude that the crucial quantity to focus on is the {\em accumulated damage}. Although this quantity exh…
▽ More
Fatigue caused by cyclic bending of a piece of material, resulting in its mechanical failure, is a phenomenon that had been studied for ages by engineers and physicists alike. In this Letter we study such fatigue in a strip of athermal amorphous solid. On the basis of atomistic simulations we conclude that the crucial quantity to focus on is the {\em accumulated damage}. Although this quantity exhibits large sample-to-sample fluctuations, its dependence on the loading determines the statistics of the number of cycles to failure. Thus we can provide a scaling theory for the Wöhler plots of mean number of cycles for failure as a function of the loading amplitude.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Fatigue and failure of a polymer chain under tension
Authors:
Harish Charan,
Alex Hansen,
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
The rupture of a polymer chain maintained at temperature $T$ under fixed tension is prototypical to a wide array of systems failing under constant external strain and random perturbations. Past research focused on analytic and numerical studies of the mean rate of collapse of such a chain. Surprisingly, an analytic calculation of the probability distribution function (PDF) of collapse rates appear…
▽ More
The rupture of a polymer chain maintained at temperature $T$ under fixed tension is prototypical to a wide array of systems failing under constant external strain and random perturbations. Past research focused on analytic and numerical studies of the mean rate of collapse of such a chain. Surprisingly, an analytic calculation of the probability distribution function (PDF) of collapse rates appears to be lacking. Since rare events of rapid collapse can be important and even catastrophic, we present here a theory of this distribution, with a stress on its tail of fast rates. We show that the tail of the PDF is a power law with a {\em universal} exponent that is theoretically determined. Extensive numerics validate the offered theory. Lessons pertaining to other problems of the same type are drawn.
△ Less
Submitted 30 July, 2020;
originally announced August 2020.
-
Robustness of Density of Low Frequency States in Amorphous Solids
Authors:
Prasenjit Das,
H. George E. Hentschel,
Edan Lerner,
Itamar Procaccia
Abstract:
Low frequency quasi-localized modes of amorphous glasses appear to exhibit universal density of states, depending on the frequencies as $D(ω) \sim ω^4$. To date various models of glass formers with short range binary interaction, and network glasses with both binary and ternary interactions, were shown to conform with this law. In this paper we examine granular amorphous solids with long-range ele…
▽ More
Low frequency quasi-localized modes of amorphous glasses appear to exhibit universal density of states, depending on the frequencies as $D(ω) \sim ω^4$. To date various models of glass formers with short range binary interaction, and network glasses with both binary and ternary interactions, were shown to conform with this law. In this paper we examine granular amorphous solids with long-range electrostatic interactions, and find that they exhibit the same law. To rationalize this wide universality class we return to a model proposed by Gurevich, Parshin and Schober (GPS) and analyze its predictions for interaction laws with varying spatial decay, exploring this wider than expected universality class. Numerical and analytic results are provided for both the actual system with long range interaction and for the GPS model.
△ Less
Submitted 28 June, 2020; v1 submitted 13 May, 2020;
originally announced May 2020.
-
Plastic Instabilities in Charged Granular Systems: Competition between Elasticity and Electrostatics
Authors:
Prasenjit Das,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
Electrostatic theory preserves charges, but allows dipolar excitations. Elasticity theory preserves dipoles, but allows quadrupolar (Eshelby like) plastic events. Charged amorphous granular systems are interesting in their own right; here we focus on their plastic instabilities and examine their mechanical response to external strain and to external electric field, to expose the competition betwee…
▽ More
Electrostatic theory preserves charges, but allows dipolar excitations. Elasticity theory preserves dipoles, but allows quadrupolar (Eshelby like) plastic events. Charged amorphous granular systems are interesting in their own right; here we focus on their plastic instabilities and examine their mechanical response to external strain and to external electric field, to expose the competition between elasticity and electrostatics. In this paper a generic model is offered, its mechanical instabilities are examined and a theoretical analysis is presented. Plastic instabilities are discussed as saddle-node bifurcations that can be fully understood in terms of eigenvalues and eigenfunctions of the relevant Hessian matrix. This system exhibits moduli that describe how electric polarization and stress are influenced by strain and electric field. Theoretical expression for these moduli are offered and compared to the measurements in numerical simulations.
△ Less
Submitted 5 May, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Precise Spatial Memory in Local Random Networks
Authors:
Joseph L. Natale,
H. George E. Hentschel,
Ilya Nemenman
Abstract:
Self-sustained, elevated neuronal activity persisting on time scales of ten seconds or longer is thought to be vital for aspects of working memory, including brain representations of real space. Continuous-attractor neural networks, one of the most well-known modeling frameworks for persistent activity, have been able to model crucial aspects of such spatial memory. These models tend to require hi…
▽ More
Self-sustained, elevated neuronal activity persisting on time scales of ten seconds or longer is thought to be vital for aspects of working memory, including brain representations of real space. Continuous-attractor neural networks, one of the most well-known modeling frameworks for persistent activity, have been able to model crucial aspects of such spatial memory. These models tend to require highly structured or regular synaptic architectures. In contrast, we elaborate a geometrically-embedded model with a local but otherwise random connectivity profile which, combined with a global regulation of the mean firing rate, produces localized, finely spaced discrete attractors that effectively span a 2D manifold. We demonstrate how the set of attracting states can reliably encode a representation of the spatial locations at which the system receives external input, thereby accomplishing spatial memory via attractor dynamics without synaptic fine-tuning or regular structure. We measure the network's storage capacity and find that the statistics of retrievable positions are also equivalent to a full tiling of the plane, something hitherto achievable only with (approximately) translationally invariant synapses, and which may be of interest in modeling such biological phenomena as visuospatial working memory in two dimensions.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Diffusion in Agitated Frictional Granular Matter Near the Jamming Transition
Authors:
H. G. E. Hentschel,
Itamar Procaccia,
Saikat Roy
Abstract:
We study agitated frictional disks in two dimensions with the aim of develo** a scaling theory for their diffusion over time. As a function of the area fraction $φ$ and mean-square velocity fluctuations $\langle v^2\rangle$ the mean-square displacement of the disks $\langle d^2\rangle$ spans 4-5 orders of magnitude. The motion evolves from a subdiffusive form to a complex diffusive behabvior at…
▽ More
We study agitated frictional disks in two dimensions with the aim of develo** a scaling theory for their diffusion over time. As a function of the area fraction $φ$ and mean-square velocity fluctuations $\langle v^2\rangle$ the mean-square displacement of the disks $\langle d^2\rangle$ spans 4-5 orders of magnitude. The motion evolves from a subdiffusive form to a complex diffusive behabvior at long times. The statistics of $\langle d^n\rangle$ at all times are multiscaling, since the probability distribution function (pdf) of displacements has very broad wings. Even where a diffusion constant can be identified it is a complex function of $φ$ and $\langle v^2\rangle$. By identifying the relevant length and time scales and their interdependence one can rescale the data for the mean square displacement and the pdf of displacements into collapsed scaling functions for all $φ$ and $\langle v^2\rangle$. These scaling functions provide a predictive tool, allowing to infer from one set of measurements (at a given $φ$ and $\langle v^2\rangle$) what are the expected results at any value of $φ$ and $\langle v^2\rangle$.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Scaling theory of shear-induced inhomogeneous dilation in granular matter
Authors:
Prasenjit Das,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
Shearing with a finite shear rate a compressed granular system results in a region of grains flowing over a compact, static assembly. Perforce this region is dilated to a degree that depends on the shear rate, the loading pressure, gravity, various material parameters, and the preparation protocol. In spite of numerous studies of granular flows a predictive theory of the amount of dilation is stil…
▽ More
Shearing with a finite shear rate a compressed granular system results in a region of grains flowing over a compact, static assembly. Perforce this region is dilated to a degree that depends on the shear rate, the loading pressure, gravity, various material parameters, and the preparation protocol. In spite of numerous studies of granular flows a predictive theory of the amount of dilation is still lacking. Here, we offer a scaling theory that is focused on such a prediction as a function of shear rate and the dissipative parameters of the granular assembly. The resulting scaling laws are universal with respect to changing the interparticle force laws.
△ Less
Submitted 21 May, 2019; v1 submitted 15 November, 2018;
originally announced November 2018.
-
Universal Scaling Laws for Shear Induced Dilation in Frictional Granular Media
Authors:
Mahesh M. Bandi,
Prasenjit Das,
Oleg Gendelman,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
Compressed frictional granular matter cannot flow without dilation. Upon forced shearing to generate flow, the amount of dilation may depend on the initial preparation and a host of material variables. On the basis of both experiments and numerical simulations we show that as a result of training by repeated compression-decompression cycles the amount of dilation induced by shearing the system dep…
▽ More
Compressed frictional granular matter cannot flow without dilation. Upon forced shearing to generate flow, the amount of dilation may depend on the initial preparation and a host of material variables. On the basis of both experiments and numerical simulations we show that as a result of training by repeated compression-decompression cycles the amount of dilation induced by shearing the system depends only on the shear rate and on the (pre-shearing) packing fraction. Relating the rheological response to structural properties allows us to derive a scaling law for the amount of dilation after $n$ cycles of compression-decompression. The resulting scaling law has a universal exponent that for trained systems is independent of the inter-granules force laws, friction parameters and strain rate. The amplitude of the scaling law is analytically computable, and it depends only on the shear rate and the asymptotic packing fraction.
△ Less
Submitted 7 May, 2019; v1 submitted 30 August, 2018;
originally announced August 2018.
-
Scaling Theory of Giant Frictional Slips in Decompressed Granular Media
Authors:
H. George E. Hentschel,
Itamar Procaccia,
Saikat Roy
Abstract:
When compressed frictional granular media are decompressed, generically a fragile configuration is created at low pressures. Typically this is accompanied by a giant frictional slippage as the fragile state collapses. We show that this instability is understood in terms of a scaling theory with theoretically computable amplitudes and exponents. The amplitude diverges in the thermodynamic limit hin…
▽ More
When compressed frictional granular media are decompressed, generically a fragile configuration is created at low pressures. Typically this is accompanied by a giant frictional slippage as the fragile state collapses. We show that this instability is understood in terms of a scaling theory with theoretically computable amplitudes and exponents. The amplitude diverges in the thermodynamic limit hinting to the possibility of huge frictional slip events in decompressed granular media. The physics of this slippage is discussed in terms of the probability distribution functions of the tangential and normal forces on the grains which are highly correlated due to the Coulomb condition.
△ Less
Submitted 27 May, 2018;
originally announced May 2018.
-
Force Distributions in Frictional Granular Media
Authors:
V. S. Akella,
M. M. Bandi,
H. George E. Hentschel,
Itamar Procaccia,
Saikat Roy
Abstract:
We report a joint experimental and theoretical investigation of the probability distribution functions (pdf's) of the normal and tangential (frictional) forces in amorphous frictional media. We consider both the joint pdf of normal and tangential forces together, and the marginal pdf's of normal forces separately and tangential forces separately. A maximum entropy formalism is utilized for all the…
▽ More
We report a joint experimental and theoretical investigation of the probability distribution functions (pdf's) of the normal and tangential (frictional) forces in amorphous frictional media. We consider both the joint pdf of normal and tangential forces together, and the marginal pdf's of normal forces separately and tangential forces separately. A maximum entropy formalism is utilized for all these cases after identifying the appropriate constraints. Excellent agreements with both experimental and simulational data are reported. The proposed joint pdf (which appears new to the literature) predicts giant slip events at low pressures, again in agreement with observations.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Magneto-mechanical Coupling in Thermal Amorphous Solids
Authors:
H. George E. Hentschel,
Valery Ilyin,
Chandana Mondal,
Itamar Procaccia
Abstract:
Standard approaches to magneto-mechanical interactions in thermal magnetic crystalline solids involve Landau functionals in which the lattice anisotropy and the resulting magnetization easy axes are taken explicitly into account. In glassy systems one needs to develop a theory in which the amorphous structure precludes the existence of an easy axis, and in which the constituent particles are free…
▽ More
Standard approaches to magneto-mechanical interactions in thermal magnetic crystalline solids involve Landau functionals in which the lattice anisotropy and the resulting magnetization easy axes are taken explicitly into account. In glassy systems one needs to develop a theory in which the amorphous structure precludes the existence of an easy axis, and in which the constituent particles are free to respond to their local amorphous surroundings and the resulting forces. We present a theory of all the mixed responses of an amorphous solids to mechanical strains and magnetic fields. Atomistic models are proposed in which we test the predictions of magnetostriction for both bulk and nano-film amorphous samples. The application to nano-films with emergent self-affine free interfaces requires a careful definition of the film 'width' and its change due to the magnetostriction effect.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Training, Memory and Universal Scaling in Amorphous Frictional Granular Matter
Authors:
M. M. Bandi,
H. George E. Hentschel,
Itamar Procaccia,
Saikat Roy,
Jacques Zylberg
Abstract:
We report a joint experimental and theoretical investigation of cyclic training of amorphous frictional granular assemblies, with special attention to memory formation and retention. Measures of dissipation and compactification are introduced, culminating with a proposed scaling law for the reducing dissipation and increasing memory. This scaling law is expected to be universal, insensitive to the…
▽ More
We report a joint experimental and theoretical investigation of cyclic training of amorphous frictional granular assemblies, with special attention to memory formation and retention. Measures of dissipation and compactification are introduced, culminating with a proposed scaling law for the reducing dissipation and increasing memory. This scaling law is expected to be universal, insensitive to the details of the elastic and frictional interactions between the granules.
△ Less
Submitted 7 January, 2018; v1 submitted 26 November, 2017;
originally announced November 2017.
-
The sandpile revisited: Computer assisted determination of constitutive relations and the breaking of scaling
Authors:
H. George E. Hentschel,
Prabhat K. Jaiswal,
Chandana Mondal,
Itamar Procaccia,
Jacques Zylberg
Abstract:
We revisit the problem of the stress distribution in a frictional sandpile under gravity, equipped with a new numerical model of granular assemblies with both normal and tangential (frictional) inter-granular forces. Numerical simulations allow a determination of the spatial dependence of all the components of the stress field as a function of systems size, the coefficient of static friction and t…
▽ More
We revisit the problem of the stress distribution in a frictional sandpile under gravity, equipped with a new numerical model of granular assemblies with both normal and tangential (frictional) inter-granular forces. Numerical simulations allow a determination of the spatial dependence of all the components of the stress field as a function of systems size, the coefficient of static friction and the frictional interaction with the bottom surface. Our study clearly demonstrates that interaction with the bottom surface plays a crucial role in the formation of a pressure dip under the apex of a granular pile. Basic to the theory of sandpiles are assumptions about the form of scaling solutions and constitutive relations for cohesive-less hard grains for which no typical scale is available. We find that these constitutive relations must be modified; moreover for smaller friction coefficients and smaller piles these scaling assumptions break down in the bulk of the sandpile due to the presence of length scales that must be carefully identified. After identifying the crucial scale we provide a predictive theory to when scaling solutions are expected to break down. At the bottom of the pile the scaling assumption always breaks, due to the different interactions with the bottom surface. The consequences for measurable quantities like the pressure distribution and shear stress at the bottom of the pile are discussed. For example one can have a transition from no dip in the base-pressure to a dip at the center of the pile as a function of the system size.
△ Less
Submitted 29 November, 2016;
originally announced November 2016.
-
Scaling Theory of the Mechanical Properties of Amorphous Nano-Films
Authors:
Awadhesh K. Dubey,
H. George E. Hentschel,
Prabhat K. Jaiswal,
Chandana Mondal,
Yoav G. Pollack,
Itamar Procaccia
Abstract:
Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create very stable glassy films. Using the exact relations between the Hessian matrix and the shear and bulk moduli we explore the mechanical properties of the nano-fi…
▽ More
Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create very stable glassy films. Using the exact relations between the Hessian matrix and the shear and bulk moduli we explore the mechanical properties of the nano-films as a function of the density of the substrate and the film thickness. The existence of the substrate dominates the mechanical properties of the combined substrate-film system. Scaling concepts are then employed to achieve data collapse in a wide range of densities and film thicknesses.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.
-
Statistics of Plastic Events in Post-Yield Strain-Controlled Amorphous Solids
Authors:
Awadhesh K. Dubey,
H. George E. Hentschel,
Itamar Procaccia,
Murari Singh
Abstract:
Amorphous solids yield in strain-controlled protocols at a critical value of the strain. For larger strains the stress and energy display a generic complex serrated signal with elastic segments punctuated by sharp energy and stress plastic drops having a wide range of magnitudes. Here we provide a theory of the scaling properties of such serrated signals taking into account the system-size depende…
▽ More
Amorphous solids yield in strain-controlled protocols at a critical value of the strain. For larger strains the stress and energy display a generic complex serrated signal with elastic segments punctuated by sharp energy and stress plastic drops having a wide range of magnitudes. Here we provide a theory of the scaling properties of such serrated signals taking into account the system-size dependence. We show that the statistics are not homogeneous - they separate sharply to a regime of `small' and `large' drops, each endowed with its own scaling properties. A scaling theory is first derived solely by data analysis, showing a somewhat complex picture. But after considering the physical interpretation one discovers that the scaling behavior and the scaling exponents are in fact very simple and universal.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.
-
Microalloying and the mechanical properties of amorphous solids
Authors:
H. George E. Hentschel,
Michael Moshe,
Itamar Procaccia,
Konrad Samwer
Abstract:
The mechanical properties of amorphous solids like metallic glasses can be dramatically changed by adding small concentrations (as low as 0.1\%) of foreign elements. The glass-forming-ability, the ductility, the yield stress and the elastic moduli can all be greatly effected. This paper presents theoretical considerations with the aim of explaining the magnitude of these changes in light of the sm…
▽ More
The mechanical properties of amorphous solids like metallic glasses can be dramatically changed by adding small concentrations (as low as 0.1\%) of foreign elements. The glass-forming-ability, the ductility, the yield stress and the elastic moduli can all be greatly effected. This paper presents theoretical considerations with the aim of explaining the magnitude of these changes in light of the small concentrations involved. The theory is built around the experimental evidence that the microalloying elements organize around them a neighborhood that differs from both the crystalline and the glassy phases of the material in the absence of the additional elements. These regions act as {\em isotropic} defects that in unstressed systems dress the shear moduli. When strained, these defects interact with the incipient plastic responses which are quadrupolar in nature. It will be shown that this interaction interferes with the creation of system-spanning shear bands and increases the yield strain. We offer experimentally testable estimates of the lengths of nano-shear bands in the presence of the additional elements.
△ Less
Submitted 14 April, 2016; v1 submitted 11 October, 2015;
originally announced October 2015.
-
Stochastic Approach to Plasticity and Yield in Amorphous Solids
Authors:
H. G. E. Hentschel,
Prabhat K. Jaiswal,
Itamar Procaccia,
Srikanth Sastry
Abstract:
We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eige…
▽ More
We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eigenvalues of the {\em plastic modes} of the Hessian matrix $P(λ)$ which scales like $λ^θ$, $η=(θ-1)/2$. The numerical values of $η$ or $θ$ can be determined easily in the unstrained material and in the yielded state of plastic flow. Special care is called for in the determination of these exponents between these states as $γ$ increases. Determining the $γ$ dependence of the pdf $P(Δγ; γ)$ can shed important light on plasticity and yield. We conclude that the pdf's of both $Δγ$ and $λ$ are not continuous functions of $γ$. In slowly quenched amorphous solids they undergo two discontinuous transitions, first at $γ=0^+$ and then at the yield point $γ=γ_{_{\rm Y}}$ to plastic flow. In quickly quenched amorphous solids the second transition is smeared out due to the non existing stress peak before yield. The nature of these transitions and scaling relations with the system size dependence of $\langle Δγ\rangle$ are discussed.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Modeling Barkhausen Noise in Magnetic Glasses with Dipole-Dipole Interactions
Authors:
Awadhesh K. Dubey,
H. George E. Hentschel,
Prabhat K. Jaiswal,
Chandana Mondal,
Itamar Procaccia,
Bhaskar Sen Gupta
Abstract:
Long-ranged dipole-dipole interactions in magnetic glasses give rise to magnetic domains having labyrinthine patterns. Barkhausen Noise is then expected to result from the movement of domain boundaries which is supposed to be modeled by the motion of elastic membranes with random pinning. We propose an atomistic model of such magnetic glasses in which we measure the Barkhausen Noise which indeed r…
▽ More
Long-ranged dipole-dipole interactions in magnetic glasses give rise to magnetic domains having labyrinthine patterns. Barkhausen Noise is then expected to result from the movement of domain boundaries which is supposed to be modeled by the motion of elastic membranes with random pinning. We propose an atomistic model of such magnetic glasses in which we measure the Barkhausen Noise which indeed results from the movement of domain boundaries. Nevertheless the statistics of the Barkhausen Noise is found in striking disagreement with the expectations in the literature. In fact we find exponential statistics without any power law, stressing the fact that Barkhausen Noise can belong to very different universality classes. In this glassy system the essence of the phenomenon is the ability of spin-carrying particles to move and minimize the energy without any spin flip. A theory is offered in excellent agreement with the measured data without any free parameter.
△ Less
Submitted 7 June, 2015;
originally announced June 2015.
-
The Anatomy of Plastic Events in Magnetic Amorphous Solids
Authors:
H. George E. Hentschel,
Itamar Procaccia,
Bhaskar Sen Gupta
Abstract:
Plastic events in amorphous solids can be much more than just "shear transformation zones" when the positional degrees of freedom are coupled non-trivially to other degrees of freedom. Here we consider magnetic amorphous solids where mechanical and magnetic degrees of freedom interact, leading to rather complex plastic events whose nature must be disentangled. In this paper we uncover the anatomy…
▽ More
Plastic events in amorphous solids can be much more than just "shear transformation zones" when the positional degrees of freedom are coupled non-trivially to other degrees of freedom. Here we consider magnetic amorphous solids where mechanical and magnetic degrees of freedom interact, leading to rather complex plastic events whose nature must be disentangled. In this paper we uncover the anatomy of the various contributions to some typical plastic events. These plastic events are seen as Barkhausen Noise or other "serrated noises". Using theoretical considerations we explain the observed statistics of the various contributions to the considered plastic events. The richness of contributions and their different characteristics imply that in general the statistics of these "serrated noises" cannot be universal, but rather highly dependent on the state of the system and on its microscopic interactions.
△ Less
Submitted 25 January, 2015;
originally announced January 2015.
-
Elasticity and Plasticity in Stiff and Flexible Oligomeric Glasses
Authors:
Oleg Gendelman,
H. George E. Hentschel,
Pankaj K. Mishra,
Itamar Procaccia,
Jacques Zylberg
Abstract:
In this paper we focus on the mechanical properties of oligomeric glasses (waxes), employing a microscopic model that provides, via numerical simulations, information about the shear modulus of such materials, the failure mechanism via plastic instabilities and about the geometric responses of the oligomers themselves to a mechanical load. We present a microscopic theory that explains the numerica…
▽ More
In this paper we focus on the mechanical properties of oligomeric glasses (waxes), employing a microscopic model that provides, via numerical simulations, information about the shear modulus of such materials, the failure mechanism via plastic instabilities and about the geometric responses of the oligomers themselves to a mechanical load. We present a microscopic theory that explains the numerically observed phenomena, including an exact theory of the shear modulus and of the plastic instabilities, both local and system spanning. In addition we present a model to explain the geometric changes in the oligomeric chains under increasing strains.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Statistical Physics of Pure Barkhausen Noise
Authors:
H. George E. Hentschel,
Valery Iliyn,
Itamar Procaccia,
Bhaskar Sen Gupta
Abstract:
We discuss a model metallic glass in which Barkhausen Noise can be studied in exquisite detail, free of thermal effects and of the rate of ram** of the magnetic field. The mechanism of the jumps in magnetic moment that cause the Barkhausen Noise can be fully understood as consecutive instabilities where an eigenvalue of the Hessian matrix hits zero, leading to a magnetization jump $Δm$ which is…
▽ More
We discuss a model metallic glass in which Barkhausen Noise can be studied in exquisite detail, free of thermal effects and of the rate of ram** of the magnetic field. The mechanism of the jumps in magnetic moment that cause the Barkhausen Noise can be fully understood as consecutive instabilities where an eigenvalue of the Hessian matrix hits zero, leading to a magnetization jump $Δm$ which is simultaneous with a stress and energy changes $Δσ$ and $ΔU$ respectively. Contrary to common belief we find no "movements of magnetic domain boundaries" across pinning sites, no fractal domains, no self-organized criticality and no exact scaling behaviour. We present a careful numerical analysis of the statistical properties of the phenomenon, and show that with every care taken this analysis is tricky, and easily misleading. Without a guiding theory it is almost impossible to get the right answer for the statistics of Barkhausen Noise. We therefore present an analytic theory, showing that the probability distribution function (pdf) of Barkhausen Noise is not a power law times an exponential cutoff.
△ Less
Submitted 17 January, 2014;
originally announced January 2014.
-
Plasticity-Induced Magnetization in Amorphous Magnetic Solids
Authors:
H. George E. Hentschel,
Itamar Procaccia,
Bhaskar Sen Gupta
Abstract:
Amorphous magnetic solids, like metallic glasses, exhibit a novel effect: the growth of magnetic order as a function of mechanical strain under athermal conditions in the presence of a magnetic field. The magnetic moment increases in steps whenever there is a plastic event. Thus plasticity induces the magnetic ordering, acting as the effective noise driving the system towards equilibrium. We prese…
▽ More
Amorphous magnetic solids, like metallic glasses, exhibit a novel effect: the growth of magnetic order as a function of mechanical strain under athermal conditions in the presence of a magnetic field. The magnetic moment increases in steps whenever there is a plastic event. Thus plasticity induces the magnetic ordering, acting as the effective noise driving the system towards equilibrium. We present results of atomistic simulations of this effect in a model of a magnetic amorphous solid subjected to pure shear and a magnetic field. To elucidate the dependence on external strain and magnetic field we offer a mean-field theory that provides an adequate qualitative understanding of the observed phenomenon.
△ Less
Submitted 15 October, 2013;
originally announced October 2013.
-
Atomistic Simulations of Magnetic Amorphous Solids: Magnetostriction, Barkhausen noise and novel singularities
Authors:
Ratul Dasgupta,
H. George E. Hentschel,
Itamar Procaccia,
Bhaskar Sen Gupta
Abstract:
We present results of atomistic simulations of a new model of a magnetic amorphous solid subjected to external mechanical strains and magnetic fields. The model employed offers new perspectives on important effects like Barkhausen noise and magnetostriction. It is shown that the plastic response in such systems exhibit singularities characterized by unexpected exponents requiring careful theoretic…
▽ More
We present results of atomistic simulations of a new model of a magnetic amorphous solid subjected to external mechanical strains and magnetic fields. The model employed offers new perspectives on important effects like Barkhausen noise and magnetostriction. It is shown that the plastic response in such systems exhibit singularities characterized by unexpected exponents requiring careful theoretical reasoning. The spatial structure of the plastic events requires a new coarse grained elasto-magnetic theory which is provided here.
△ Less
Submitted 15 October, 2013;
originally announced October 2013.
-
Derivation of the Johnson-Samwer $T^{(2/3)}$ Temperature Dependence of the Yield Strain in Metallic Glasses
Authors:
Ratul Dasgupta,
Ashwin Joy,
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
Metallic Glasses are prone to fail mechanically via a shear-banding instability. In a remarkable paper Johnson and Samwer demonstrated that this failure enjoys a high degree of universality in the sense that a large group of metallic glasses appears to possess a yield-strain that decreases with temperature following a $-T^{2/3}$ law up to logarithmic corrections. In this Letter we offer a theoreti…
▽ More
Metallic Glasses are prone to fail mechanically via a shear-banding instability. In a remarkable paper Johnson and Samwer demonstrated that this failure enjoys a high degree of universality in the sense that a large group of metallic glasses appears to possess a yield-strain that decreases with temperature following a $-T^{2/3}$ law up to logarithmic corrections. In this Letter we offer a theoretical derivation of this law. We show that our formula fits very well simulational data on typical amorphous solids.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.
-
Local elastic response measured near the colloidal glass transition
Authors:
D. Anderson,
D. Schaar,
H. G. E. Hentschel,
J. Hay,
Piotr Habdas,
Eric R. Weeks
Abstract:
We examine the response of a dense colloidal suspension to a local force applied by a small magnetic bead. For small forces, we find a linear relationship between the force and the displacement, suggesting the medium is elastic, even though our colloidal samples macroscopically behave as fluids. We interpret this as a measure of the strength of colloidal caging, reflecting the proximity of the sam…
▽ More
We examine the response of a dense colloidal suspension to a local force applied by a small magnetic bead. For small forces, we find a linear relationship between the force and the displacement, suggesting the medium is elastic, even though our colloidal samples macroscopically behave as fluids. We interpret this as a measure of the strength of colloidal caging, reflecting the proximity of the samples' volume fractions to the colloidal glass transition. The strain field of the colloidal particles surrounding the magnetic probe appears similar to that of an isotropic homogeneous elastic medium. When the applied force is removed, the strain relaxes as a stretched exponential in time. We introduce a model that suggests this behavior is due to the diffusive relaxation of strain in the colloidal sample.
△ Less
Submitted 12 October, 2012;
originally announced October 2012.
-
Temperature-dependent proximity magnetism in Pt
Authors:
W. L. Lim,
N. Ebrahim-Zadeh,
H. G. E. Hentschel,
S. Urazhdin
Abstract:
We experimentally demonstrate the existence of magnetic coupling between two ferromagnets separated by a thin Pt layer. The coupling remains ferromagnetic regardless of the Pt thickness, and exhibits a significant dependence on temperature. Therefore, it cannot be explained by the established mechanisms of magnetic coupling across nonmagnetic spacers. We show that the experimental results are cons…
▽ More
We experimentally demonstrate the existence of magnetic coupling between two ferromagnets separated by a thin Pt layer. The coupling remains ferromagnetic regardless of the Pt thickness, and exhibits a significant dependence on temperature. Therefore, it cannot be explained by the established mechanisms of magnetic coupling across nonmagnetic spacers. We show that the experimental results are consistent with the presence of magnetism induced in Pt in proximity to ferromagnets, in direct analogy to the well-known proximity effects in superconductivity.
△ Less
Submitted 9 September, 2012;
originally announced September 2012.
-
The Yield-Strain in Shear Banding Amorphous Solids
Authors:
Ratul Dasgupta,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
In recent research it was found that the fundamental shear-localizing instability of amorphous solids under external strain, which eventually results in a shear band and failure, consists of a highly correlated array of Eshelby quadrupoles all having the same orientation and some density $ρ$. In this paper we calculate analytically the energy $E(ρ,γ)$ associated with such highly correlated structu…
▽ More
In recent research it was found that the fundamental shear-localizing instability of amorphous solids under external strain, which eventually results in a shear band and failure, consists of a highly correlated array of Eshelby quadrupoles all having the same orientation and some density $ρ$. In this paper we calculate analytically the energy $E(ρ,γ)$ associated with such highly correlated structures as a function of the density $ρ$ and the external strain $γ$. We show that for strains smaller than a characteristic strain $γ_Y$ the total strain energy initially increases as the quadrupole density increases, but that for strains larger than $γ_Y$ the energy monotonically decreases with quadrupole density. We identify $γ_Y$ as the yield strain. Its value, derived from values of the qudrupole strength based on the atomistic model, agrees with that from the computed stress-strain curves and broadly with experimental results.
△ Less
Submitted 6 November, 2012; v1 submitted 16 August, 2012;
originally announced August 2012.
-
Microscopic Mechanism of Shear Bands in Amorphous Solids
Authors:
Ratul Dasgupta,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
The fundamental instability responsible for the shear localization which results in shear bands in amorphous solids remains unknown despite enormous amount of research, both experimental and theoretical. As this is the main mechanism for the failure of metallic glasses, understanding the instability is invaluable in finding how to stabilize such materials against the tendency to shear localize. In…
▽ More
The fundamental instability responsible for the shear localization which results in shear bands in amorphous solids remains unknown despite enormous amount of research, both experimental and theoretical. As this is the main mechanism for the failure of metallic glasses, understanding the instability is invaluable in finding how to stabilize such materials against the tendency to shear localize. In this Letter we explain the mechanism for shear localization under shear, which is the appearance of highly correlated lines of Eshelby-like quadrupolar singularities which organize the non-affine plastic flow of the amorphous solid into a shear band. We prove analytically that such highly correlated solutions in which $\C N$ quadrupoles are aligned with equal orientations are minimum energy states when the strain is high enough. The line lies at 45 degrees to the compressive stress.
△ Less
Submitted 6 November, 2012; v1 submitted 16 July, 2012;
originally announced July 2012.
-
The Plastic Response of Magnetoelastic Amorphous Solids
Authors:
H. G. E. Hentschel,
Valery Ilyin,
Itamar Procaccia
Abstract:
We address the cross effects between mechanical strains and magnetic fields on the plastic response of magnetoelastic amorphous solids. It is well known that plasticity in non-magnetic amorphous solids under external strain $γ$ is dominated by the co-dimension 1 saddle-node bifurcation in which an eigenvalue of the Hessian matrix vanishes at $γ_P$ like $\sqrt{γ_P-γ}$. This square-root singularity…
▽ More
We address the cross effects between mechanical strains and magnetic fields on the plastic response of magnetoelastic amorphous solids. It is well known that plasticity in non-magnetic amorphous solids under external strain $γ$ is dominated by the co-dimension 1 saddle-node bifurcation in which an eigenvalue of the Hessian matrix vanishes at $γ_P$ like $\sqrt{γ_P-γ}$. This square-root singularity determines much of the statistical physics of elasto-plasticity, and in particular that of the stress-strain curves under athermal-quasistatic conditions. In this Letter we discuss the much richer physics that can be expected in magnetic amorphous solids. Firstly, magnetic amorphous solids exhibit co-dimension 2 plastic instabilities, when an external strain and an external magnetic field are applied simultaneously. Secondly, the phase diagrams promise a rich array of new effects that have been barely studied; this opens up a novel and extremely rich research program for magnetoplastic materials.
△ Less
Submitted 4 May, 2012; v1 submitted 19 March, 2012;
originally announced March 2012.
-
Relaxation Mechanisms in Glassy Dynamics: the Arrhenius and Fragile Regimes
Authors:
H. George E. Hentschel,
Smarajit Karmakar,
Itamar Procaccia,
Jacques Zylberg
Abstract:
Generic glass formers exhibit at least two characteristic changes in their relaxation behavior, first to an Arrhenius-type relaxation at some characteristic temperature, and then at a lower characteristic temperature to a super-Arrhenius (fragile) behavior. We address these transitions by studying the statistics of free energy barriers for different systems at different temperatures and space dime…
▽ More
Generic glass formers exhibit at least two characteristic changes in their relaxation behavior, first to an Arrhenius-type relaxation at some characteristic temperature, and then at a lower characteristic temperature to a super-Arrhenius (fragile) behavior. We address these transitions by studying the statistics of free energy barriers for different systems at different temperatures and space dimensions. We present a clear evidence for changes in the dynamical behavior at the transition to Arrhenius and then to a super-Arrhenius behavior. A simple model is presented, based on the idea of competition between single-particle and cooperative dynamics. We argue that Arrhenius behavior can take place as long as there is enough free volume for the completion of a simple $T_1$ relaxation process. Once free volume is absent one needs a cooperative mechanism to `collect' enough free volume. We show that this model captures all the qualitative behavior observed in simulations throughout the considered temperature range.
△ Less
Submitted 7 March, 2012; v1 submitted 6 February, 2012;
originally announced February 2012.
-
Statistical Mechanics of Glass Formation in Molecular Liquids with OTP as an Example
Authors:
Laurent Boué,
H. G. E. Hentschel,
Valery Ilyin,
Itamar Procaccia
Abstract:
We extend our statistical mechanical theory of the glass transition from examples consisting of point particles to molecular liquids with internal degrees of freedom. As before, the fundamental assertion is that super-cooled liquids are ergodic, although becoming very viscous at lower temperatures, and are therefore describable in principle by statistical mechanics. The theory is based on analyzin…
▽ More
We extend our statistical mechanical theory of the glass transition from examples consisting of point particles to molecular liquids with internal degrees of freedom. As before, the fundamental assertion is that super-cooled liquids are ergodic, although becoming very viscous at lower temperatures, and are therefore describable in principle by statistical mechanics. The theory is based on analyzing the local neighborhoods of each molecule, and a statistical mechanical weight is assigned to every possible local organization. This results in an approximate theory that is in very good agreement with simulations regarding both thermodynamical and dynamical properties.
△ Less
Submitted 30 March, 2011;
originally announced March 2011.
-
Do Athermal Amorphous Solids Exist?
Authors:
H. G. E. Hentschel,
Smarajit Karmakar,
Edan Lerner,
Itamar Procaccia
Abstract:
We study the elastic theory of amorphous solids made of particles with finite range interactions in the thermodynamic limit. For the elastic theory to exist one requires all the elastic coefficients, linear and nonlinear, to attain a finite thermodynamic limit. We show that for such systems the existence of non-affine mechanical responses results in anomalous fluctuations of all the nonlinear coef…
▽ More
We study the elastic theory of amorphous solids made of particles with finite range interactions in the thermodynamic limit. For the elastic theory to exist one requires all the elastic coefficients, linear and nonlinear, to attain a finite thermodynamic limit. We show that for such systems the existence of non-affine mechanical responses results in anomalous fluctuations of all the nonlinear coefficients of the elastic theory. While the shear modulus exists, the first nonlinear coefficient B_2 has anomalous fluctuations and the second nonlinear coefficient B_3 and all the higher order coefficients (which are non-zero by symmetry) diverge in the thermodynamic limit. These results put a question mark on the existence of elasticity (or solidity) of amorphous solids at finite strains, even at zero temperature. We discuss the physical meaning of these results and propose that in these systems elasticity can never be decoupled from plasticity: the nonlinear response must be very substantially plastic.
△ Less
Submitted 8 March, 2011; v1 submitted 30 December, 2010;
originally announced January 2011.
-
The Effective Temperature in Elasto-Plasticity of Amorphous Solids
Authors:
Laurent Boue',
H. G. E. Hentschel,
Itamar Procaccia,
Ido Regev,
Jacques Zylberg
Abstract:
An effective temperature $T_{\rm eff}$ which differs from the bath temperature is believed to play an essential role in the theory of elasto-plasticity of amorphous solids. The definition of a measurable $T_{\rm eff}$ in the literature on sheared solids suffers however from being connected to a fluctuation-dissipation theorem which is correct only in equilibrium. Here we introduce a natural defi…
▽ More
An effective temperature $T_{\rm eff}$ which differs from the bath temperature is believed to play an essential role in the theory of elasto-plasticity of amorphous solids. The definition of a measurable $T_{\rm eff}$ in the literature on sheared solids suffers however from being connected to a fluctuation-dissipation theorem which is correct only in equilibrium. Here we introduce a natural definition of $T_{\rm eff}$ based on measurable structural features without recourse to any questionable assumption. The value of $T_{\rm eff}$ is connected, using theory and scaling concepts, to the flow stress and the mean energy that characterize the elasto-plastic flow.
△ Less
Submitted 27 August, 2009;
originally announced August 2009.
-
Size of Plastic Events in Strained Amorphous Solids at Finite Temperatures
Authors:
H. G. E. Hentschel,
Smarajit Karmakar,
Edan Lerner,
Itamar Procaccia
Abstract:
We address the system-size dependence of typical plastic flow events when an amorphous solid is put under a fixed external strain rate at a finite temperature. For system sizes that are accessible to numerical simulations at reasonable strain rates and at low temperatures the magnitude of plastic events grows with the system size. We explain however that this must be a finite size effect; for la…
▽ More
We address the system-size dependence of typical plastic flow events when an amorphous solid is put under a fixed external strain rate at a finite temperature. For system sizes that are accessible to numerical simulations at reasonable strain rates and at low temperatures the magnitude of plastic events grows with the system size. We explain however that this must be a finite size effect; for larger systems there exist two cross-over length-scales $ξ_1$ and $ξ_2$, the first determined by the elastic time-scale and the second by the thermal energy-scale. For system of linear size $L$ larger than any of these scales the magnitude of plastic events must be bounded. For systems of size $L\gg ξ$ there must exist $(L/ξ)^d$ uncorrelated plastic events which occur simultaneously. We present a scaling theory that culminates with the dependence of the cross-over scales on temperature and strain rate. Finally we relate these findings to the temperature and size dependence of the stress fluctuations. We comment on the importance of these considerations for theories of elasto-plasticity.
△ Less
Submitted 15 August, 2009;
originally announced August 2009.
-
Relations between the Material Mechanical Parameters and the Inter-particle Potential in Amorphous Solids
Authors:
Edan Lerner,
Itamar Procaccia,
Emily S. C. Ching,
H. G. E Hentschel
Abstract:
The shear-modulus and yield-stress of amorphous solids are important material parameters, with the former determining the rate of increase of stress under external strain and the latter being the stress value at which the material flows in a plastic manner. It is therefore important to understand how these parameters can be related to the inter-particle potential. Here a scaling theory is presen…
▽ More
The shear-modulus and yield-stress of amorphous solids are important material parameters, with the former determining the rate of increase of stress under external strain and the latter being the stress value at which the material flows in a plastic manner. It is therefore important to understand how these parameters can be related to the inter-particle potential. Here a scaling theory is presented such that given the inter-particle potential, the dependence of the yield stress and the shear modulus on the density of the solid can be predicted in the athermal limit. It is explained when such prediction is possible at all densities and when it is only applicable at high densities. These results open up exciting possibilities for designing in principle new materials with desirable mechanical properties.
△ Less
Submitted 26 February, 2009;
originally announced February 2009.
-
Non-Universality of the Specific Heat in Glass Forming Systems
Authors:
H. G. E. Hentschel,
Valery Ilyin,
Itamar Procaccia
Abstract:
We present new simulation results for the specific heat in a classical model of a binary mixture glass-former in two dimensions. We show that in addition to the formerly observed specific heat peak there is a second peak at lower temperatures which was not observable in earlier simulations. This is a surprise, as most texts on the glass transition expect a single specific heat peak. We explain t…
▽ More
We present new simulation results for the specific heat in a classical model of a binary mixture glass-former in two dimensions. We show that in addition to the formerly observed specific heat peak there is a second peak at lower temperatures which was not observable in earlier simulations. This is a surprise, as most texts on the glass transition expect a single specific heat peak. We explain the physics of the two specific heat peaks by the micro-melting of two types of clusters. While this physics is easily accessible, the consequences are that one should not expect any universality in the temperature dependence of the specific heat in glass formers.
△ Less
Submitted 20 August, 2008;
originally announced August 2008.
-
Theory of Specific Heat in Glass Forming Systems
Authors:
H. G. E. Hentschel,
Valery Ilyin,
Itamar Procaccia,
Nurith Schupper
Abstract:
Experimental measurements of the specific heat in glass-forming systems reveal anomalies in the temperature dependence of the specific heat, including the so called "specific heat peak" in the vicinity of the glass transition. The aim of this paper is to provide theoretical explanations of these anomalies in general and a quantitative theory in the case of a simple model of glass-formation. We f…
▽ More
Experimental measurements of the specific heat in glass-forming systems reveal anomalies in the temperature dependence of the specific heat, including the so called "specific heat peak" in the vicinity of the glass transition. The aim of this paper is to provide theoretical explanations of these anomalies in general and a quantitative theory in the case of a simple model of glass-formation. We first present new simulation results for the specific heat in a classical model of a binary mixture. We show that in addition to the formerly observed specific heat peak there is a second peak at lower temperatures which was not observable in earlier simulations. Second, we present a general relation between the specific heat and the bulk modulus and thus offer a smooth connection between the liquid and amorphous solid states. The central result of this paper is a connection between the micro-melting of clusters in the system and the appearance of specific heat peaks. We relate the two peaks to changes in the bulk and shear moduli. We propose that the phenomenon of glass-formation is accompanied by a fast change in the bulk and the shear moduli, but these fast changes occur in different ranges of the temperature. Lastly, we demonstrate how to construct a theory of the frequency dependent complex specific heat, expected from heterogeneous clustering in the liquid state of glass formers. A specific example is provided in the context of our model for the dynamics of glycerol. The theoretical frequency dependent specific heat agrees well with experimental measurements on glycerol. We conclude the paper by stating that there is nothing universal about the temperature dependence of the specific heat in glass formers - unfortunately one needs to understand each case by itself.
△ Less
Submitted 25 August, 2008; v1 submitted 15 August, 2008;
originally announced August 2008.
-
Theory of Relaxation Dynamics in Glass-Forming Hydrogen-Bonded Liquids
Authors:
H. G. E. Hentschel,
Itamar Procaccia
Abstract:
We address the relaxation dynamics in hydrogen-bonded super-cooled liquids near the glass transition, measured via Broad-Band Dielectric Spectroscopy (BDS). We propose a theory based on decomposing the relaxation of the macroscopic dipole moment into contributions from hydrogen bonded clusters of $s$ molecules, with $s_{min}\le s \le s_{max}$. The existence of $s_{max}$ is due to dynamical arres…
▽ More
We address the relaxation dynamics in hydrogen-bonded super-cooled liquids near the glass transition, measured via Broad-Band Dielectric Spectroscopy (BDS). We propose a theory based on decomposing the relaxation of the macroscopic dipole moment into contributions from hydrogen bonded clusters of $s$ molecules, with $s_{min}\le s \le s_{max}$. The existence of $s_{max}$ is due to dynamical arrest and its value may depend on the cooling protocol and on the aging time. The existence of $s_{max}$ is translated into a sum-rule on the concentrations of clusters of size $s$. We construct the statistical mechanics of the super-cooled liquid subject to this sum-rule as a constraint, to estimate the temperature-dependent density of clusters of size $s$. With a theoretical estimate of the relaxation time of each cluster we provide predictions for the real and imaginary part of the frequency dependent dielectric response. The predicted spectra and their temperature dependence are in accord with measurements, explaining a host of phenomenological fits like the Vogel-Fulcher fit and the stretched exponential fit. Using glycerol as a particular example we demonstrate quantitative correspondence between theory and experiments. The theory also demonstrates that the $α$ peak and the "excess wing" stem from the same physics in this material. The theory also shows that in other hydrogen -bonded glass formers the "excess wing" can develop into a $β$ peak, depending on the molecular material parameters (predominantly the surface energy of the clusters). We thus argue that $α$ and $β$ peaks can stem from the same physics. Finally we address the BDS in constrained geometries (pores) and explain why recent experiments on glycerol did not show a deviation from bul k spectra.
△ Less
Submitted 27 September, 2007;
originally announced September 2007.
-
Entropic Studies of Cytoskeletal Motors Jamming
Authors:
C. M. Arizmendi,
H. G. E. Hentschel,
F. Family
Abstract:
Can the different causes for disruption of intracellular transport be traced from the trajectories of the molecular motors on the cytoskeletal filaments? We will attempt to answer this important question in a Monte Carlo model of microtubule-motor protein interaction from the point of view of information theory.
Can the different causes for disruption of intracellular transport be traced from the trajectories of the molecular motors on the cytoskeletal filaments? We will attempt to answer this important question in a Monte Carlo model of microtubule-motor protein interaction from the point of view of information theory.
△ Less
Submitted 28 April, 2007;
originally announced April 2007.
-
Converting genetic network oscillations into somite spatial pattern
Authors:
K. I. Mazzitello,
C. M. Arizmendi,
H. G. E. Hentschel
Abstract:
In most vertebrate species, the body axis is generated by the formation of repeated transient structures called somites. This spatial periodicity in somitogenesis has been related to the temporally sustained oscillations in certain mRNAs and their associated gene products in the cells forming the presomatic mesoderm. The mechanism underlying these oscillations have been identified as due to the…
▽ More
In most vertebrate species, the body axis is generated by the formation of repeated transient structures called somites. This spatial periodicity in somitogenesis has been related to the temporally sustained oscillations in certain mRNAs and their associated gene products in the cells forming the presomatic mesoderm. The mechanism underlying these oscillations have been identified as due to the delays involved in the synthesis of mRNA and translation into protein molecules [J. Lewis, Current Biol. {\bf 13}, 1398 (2003)]. In addition, in the zebrafish embryo intercellular Notch signalling couples these oscillators and a longitudinal positional information signal in the form of an Fgf8 gradient exists that could be used to transform these coupled temporal oscillations into the observed spatial periodicity of somites. Here we consider a simple model based on this known biology and study its consequences for somitogenesis. Comparison is made with the known properties of somite formation in the zebrafish embryo . We also study the effects of localized Fgf8 perturbations on somite patterning.
△ Less
Submitted 23 April, 2007;
originally announced April 2007.
-
Statistical Mechanics of the Glass Transition
Authors:
H. G. E. Hentschel,
Valery Ilyin,
Nataliya Makedonska,
Itamar Procaccia,
Nurith Schupper
Abstract:
The statistical mechanics of simple glass forming systems in 2 dimensions is worked out. The glass disorder is encoded via a Voronoi tessellation, and the statistical mechanics is performed directly in this encoding. The theory provides, without free parameters, an explanation of the glass transition phenomenology, including the identification of two different temperatures, $T_g$ and $T_k$, the…
▽ More
The statistical mechanics of simple glass forming systems in 2 dimensions is worked out. The glass disorder is encoded via a Voronoi tessellation, and the statistical mechanics is performed directly in this encoding. The theory provides, without free parameters, an explanation of the glass transition phenomenology, including the identification of two different temperatures, $T_g$ and $T_k$, the first associated with jamming and the second associated with the appearance of a quasi-crystal at very low temperatures.
△ Less
Submitted 20 August, 2006;
originally announced August 2006.
-
Direct Identification of the Glass Transition: Growing Length Scale and the Onset of Plasticity
Authors:
Einat Aharonov,
Eran Bouchbinder,
H. G. E. Hentschel,
Valery Ilyin,
Nataliya Makedonska,
Itamar Procaccia,
Nurith Schupper
Abstract:
Understanding the mechanical properties of glasses remains elusive since the glass transition itself is not fully understood, even in well studied examples of glass formers in two dimensions. In this context we demonstrate here: (i) a direct evidence for a diverging length scale at the glass transition (ii) an identification of the glass transition with the disappearance of fluid-like regions an…
▽ More
Understanding the mechanical properties of glasses remains elusive since the glass transition itself is not fully understood, even in well studied examples of glass formers in two dimensions. In this context we demonstrate here: (i) a direct evidence for a diverging length scale at the glass transition (ii) an identification of the glass transition with the disappearance of fluid-like regions and (iii) the appearance in the glass state of fluid-like regions when mechanical strain is applied.
These fluid-like regions are associated with the onset of plasticity in the amorphous solid. The relaxation times which diverge upon the approach to the glass transition are related quantitatively.
△ Less
Submitted 30 November, 2006; v1 submitted 14 August, 2006;
originally announced August 2006.
-
Anisotropic Diffusion Limited Aggregation
Authors:
M. N. Popescu,
H. G. E. Hentschel,
F. Family
Abstract:
Using stochastic conformal map**s we study the effects of anisotropic perturbations on diffusion limited aggregation (DLA) in two dimensions. The harmonic measure of the growth probability for DLA can be conformally mapped onto a constant measure on a unit circle. Here we map $m$ preferred directions for growth of angular width $σ$ to a distribution on the unit circle which is a periodic funct…
▽ More
Using stochastic conformal map**s we study the effects of anisotropic perturbations on diffusion limited aggregation (DLA) in two dimensions. The harmonic measure of the growth probability for DLA can be conformally mapped onto a constant measure on a unit circle. Here we map $m$ preferred directions for growth of angular width $σ$ to a distribution on the unit circle which is a periodic function with $m$ peaks in $[-π, π)$ such that the width $σ$ of each peak scales as $σ\sim 1/\sqrt{k}$, where $k$ defines the ``strength'' of anisotropy along any of the $m$ chosen directions. The two parameters $(m,k)$ map out a parameter space of perturbations that allows a continuous transition from DLA (for $m=0$ or $k=0$) to $m$ needle-like fingers as $k \to \infty$. We show that at fixed $m$ the effective fractal dimension of the clusters $D(m,k)$ obtained from mass-radius scaling decreases with increasing $k$ from $D_{DLA} \simeq 1.71$ to a value bounded from below by $D_{min} = 3/2$. Scaling arguments suggest a specific form for the dependence of the fractal dimension $D(m,k)$ on $k$ for large $k$, form which compares favorably with numerical results.
△ Less
Submitted 20 July, 2003;
originally announced July 2003.
-
Diffusion Limited Aggregation with Power-Law Pinning
Authors:
H. G. E. Hentschel,
M. N. Popescu,
F. Family
Abstract:
Using stochastic conformal map** techniques we study the patterns emerging from Laplacian growth with a power-law decaying threshold for growth $R_N^{-γ}$ (where $R_N$ is the radius of the $N-$ particle cluster). For $γ> 1$ the growth pattern is in the same universality class as diffusion limited aggregation (DLA) growth, while for $γ< 1$ the resulting patterns have a lower fractal dimension…
▽ More
Using stochastic conformal map** techniques we study the patterns emerging from Laplacian growth with a power-law decaying threshold for growth $R_N^{-γ}$ (where $R_N$ is the radius of the $N-$ particle cluster). For $γ> 1$ the growth pattern is in the same universality class as diffusion limited aggregation (DLA) growth, while for $γ< 1$ the resulting patterns have a lower fractal dimension $D(γ)$ than a DLA cluster due to the enhancement of growth at the hot tips of the develo** pattern. Our results indicate that a pinning transition occurs at $γ= 1/2$, significantly smaller than might be expected from the lower bound $α_{min} \simeq 0.67$ of multifractal spectrum of DLA. This limiting case shows that the most singular tips in the pruned cluster now correspond to those expected for a purely one-dimensional line. Using multifractal analysis, analytic expressions are established for $D(γ)$ both close to the breakdown of DLA universality class, i.e., $γ\lesssim 1$, and close to the pinning transition, i.e., $γ\gtrsim 1/2$.
△ Less
Submitted 20 July, 2003;
originally announced July 2003.
-
Dynamical Instabilities of Quasi-static Crack Propagation Under Thermal Stress
Authors:
Eran Bouchbinder,
H. George E. Hentschel,
Itamar Procaccia
Abstract:
We address the theory of quasi-static crack propagation in a strip of glass that is pulled from a hot oven towards a cold bath. This problem had been carefully studied in a number of experiments that offer a wealth of data to challenge the theory. We improve upon previous theoretical treatments in a number of ways. First, we offer a technical improvement of the discussion of the instability towa…
▽ More
We address the theory of quasi-static crack propagation in a strip of glass that is pulled from a hot oven towards a cold bath. This problem had been carefully studied in a number of experiments that offer a wealth of data to challenge the theory. We improve upon previous theoretical treatments in a number of ways. First, we offer a technical improvement of the discussion of the instability towards the creation of a straight crack. This improvement consists of employing Padé approximants to solve the relevant Weiner-Hopf factorization problem that is associated with this transition. Next we improve the discussion of the onset of oscillatory instability towards an undulating crack. We offer a novel way of considering the problem as a sum of solutions of a finite strip without a crack and an infinite medium with a crack. This allows us to present a closed form solution of the stress intensity factors in the vicinity of the oscillatory instability. Most importantly we develop a {\em dynamical} description of the actual trajectory in the regime of oscillatory crack. This theory is based on the dynamical law for crack propagation proposed by Hodgdon and Sethna. We show that this dynamical law results in a solution of the actual track trajectory in post critical conditions; we can compute from first principles the critical value of the control parameters, and the characteristics of the solution like the wavelength of the oscillations. We present detailed comparison with experimental measurements without any free parameter. The comparison appears quite excellent. Lastly we show that the dynamical law can be translated to an equation for the amplitude of the oscillatory crack; this equation predicts correctly the scaling exponents observed in experiments.
△ Less
Submitted 12 May, 2003;
originally announced May 2003.