-
Silicon-doped $β$-Ga$_2$O$_3$ films grown at 1 $μ$m/h by suboxide molecular-beam epitaxy
Authors:
Kathy Azizie,
Felix V. E. Hensling,
Cameron A. Gorsak,
Yunjo Kim,
Daniel M. Dryden,
M. K. Indika Senevirathna,
Selena Coye,
Shun-Li Shang,
Jacob Steele,
Patrick Vogt,
Nicholas A. Parker,
Yorick A. Birkhölzer,
Jonathan P. McCandless,
Debdeep Jena,
Huili G. Xing,
Zi-Kui Liu,
Michael D. Williams,
Andrew J. Green,
Kelson Chabak,
Adam T. Neal,
Shin Mou,
Michael O. Thompson,
Hari P. Nair,
Darrell G. Schlom
Abstract:
We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow $β$-Ga$_2$O$_3$ at a growth rate of ~1 $μ$m/h with control of the silicon do** concentration from 5x10$^{16}$ to 10$^{19}$ cm$^{-3}$. In S-MBE, pre-oxidized gallium in the form of a molecular beam that is 99.98\% Ga$_2$O, i.e., gallium suboxide, is supplied. Directly supplying Ga2O to the growth surface bypasses the rate-limiti…
▽ More
We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow $β$-Ga$_2$O$_3$ at a growth rate of ~1 $μ$m/h with control of the silicon do** concentration from 5x10$^{16}$ to 10$^{19}$ cm$^{-3}$. In S-MBE, pre-oxidized gallium in the form of a molecular beam that is 99.98\% Ga$_2$O, i.e., gallium suboxide, is supplied. Directly supplying Ga2O to the growth surface bypasses the rate-limiting first step of the two-step reaction mechanism involved in the growth of $β$-Ga$_2$O$_3$ by conventional MBE. As a result, a growth rate of ~1 $μ$m/h is readily achieved at a relatively low growth temperature (T$_{sub}$ = 525 $^\circ$C), resulting in films with high structural perfection and smooth surfaces (rms roughness of < 2 nm on ~1 $μ$m thick films). Silicon-containing oxide sources (SiO and SiO$_2$) producing an SiO suboxide molecular beam are used to dope the $β$-Ga$_2$O$_3$ layers. Temperature-dependent Hall effect measurements on a 1 $μ$m thick film with a mobile carrier concentration of 2.7x10$^{17}$ cm$^{-3}$ reveal a room-temperature mobility of 124 cm$^2$ V$^{-1}$ s$^{-1}$ that increases to 627 cm$^2$ V$^{-1}$ s$^{-1}$ at 76 K; the silicon dopants are found to exhibit an activation energy of 27 meV. We also demonstrate working MESFETs made from these silicon-doped $β$-Ga$_2$O$_3$ films grown by S-MBE at growth rates of ~1 $μ$m/h.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Extending the kinetic and thermodynamic limits of molecular-beam epitaxy utilizing suboxide sources or metal-oxide catalyzed epitaxy
Authors:
Patrick Vogt,
Felix V. E. Hensling,
Kathy Azizie,
Jonathan P. McCandless,
Jisung Park,
Kursti DeLello,
David A. Muller,
Huili G. Xing,
Debdeep Jena,
Darrell G. Schlom
Abstract:
We observe a catalytic mechanism during the growth of III-O and IV-O materials by suboxide molecular-beam epitaxy ($S$-MBE). By supplying the molecular catalysts In$_2$O and SnO we increase the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. This catalytic action is explained by a metastable adlayer $A$, which increases the reaction probability of the reactants Ga$_2$O and In$_2$O with active atomic…
▽ More
We observe a catalytic mechanism during the growth of III-O and IV-O materials by suboxide molecular-beam epitaxy ($S$-MBE). By supplying the molecular catalysts In$_2$O and SnO we increase the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. This catalytic action is explained by a metastable adlayer $A$, which increases the reaction probability of the reactants Ga$_2$O and In$_2$O with active atomic oxygen, leading to an increase of the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. We derive a model for the growth of binary III-O and IV-O materials by $S$-MBE and apply these findings to a generalized catalytic description for metal-oxide catalyzed epitaxy (MOCATAXY), applicable to elemental and molecular catalysts. We derive a mathematical description of $S$-MBE and MOCATAXY providing a computational framework to set growth parameters in previously inaccessible kinetic and thermodynamic growth regimes when using the aforementioned catalysis. Our results indicate MOCATAXY takes place with a suboxide catalyst rather than with an elemental catalyst. As a result of the growth regimes achieved, we demonstrate a Ga$_2$O$_3$/Al$_2$O$_3$ heterostructure with unrivaled crystalline quality, paving the way to the preparation of oxide device structures with unprecedented perfection.
△ Less
Submitted 10 December, 2021; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Adsorption-Controlled Growth of Ga2O3 by Suboxide Molecular-Beam Epitaxy
Authors:
Patrick Vogt,
Felix V. E. Hensling,
Kathy Azizie,
Celesta S. Chang,
David Turner,
Jisung Park,
Jonathan P. McCandless,
Hanjong Paik,
Brandon J. Bocklund,
Georg Hoffman,
Oliver Bierwagen,
Debdeep Jena,
Huili G. Xing,
Shin Mou,
David A. Muller,
Shun-Li Shang,
Zi-Kui Liu,
Darrell G. Schlom
Abstract:
This paper introduces a growth method---suboxide molecular-beam epitaxy (S-MBE)---which enables the growth of Ga2O3 and related materials at growth rates exceeding 1 micrometer per hours with excellent crystallinity in an adsorptioncontrolled regime. Using a Ga + Ga2O3 mixture with an oxygen mole fraction of x(O) = 0.4 as an MBE source, we overcome kinetic limits that had previously hampered the a…
▽ More
This paper introduces a growth method---suboxide molecular-beam epitaxy (S-MBE)---which enables the growth of Ga2O3 and related materials at growth rates exceeding 1 micrometer per hours with excellent crystallinity in an adsorptioncontrolled regime. Using a Ga + Ga2O3 mixture with an oxygen mole fraction of x(O) = 0.4 as an MBE source, we overcome kinetic limits that had previously hampered the adsorption-controlled growth of Ga2O3 by MBE. We present growth rates up to 1.6 micrometer per hour for Ga2O3--Al2O3 heterostructures with unprecedented crystalline quality and also at unparalleled low growth temperature for this level of perfection. We combine thermodynamic knowledge of how to create molecular-beams of targeted suboxides with a kinetic model developed for the S-MBE of III-VI compounds to identify appropriate growth conditions. Using S-MBE we demonstrate the growth of phase-pure, smooth, and high-purity homoepitaxial Ga2O3 films that are thicker than 4 micrometer. With the high growth rate of S-MBE we anticipate a significant improvement to vertical Ga2O3-based devices. We describe and demonstrate how this growth method can be applied to a wide-range of oxides. S-MBE rivals leading synthesis methods currently used for the production of Ga2O3-based devices.
△ Less
Submitted 30 October, 2020;
originally announced November 2020.
-
SrTiO$_3$ termination control: A method to tailor the oxygen exchange kinetics
Authors:
Felix V. E. Hensling,
Christoph Baeumer,
Marc-André Rose,
Felix Gunkel,
Regina Dittmann
Abstract:
We provide insights into the influence of surface termination on the oxygen vacancy incorporation for the perovskite model material SrTiO3 during annealing in reducing gas environments. We present a novel approach to control to tailor the oxygen vacancy formation by controlling the termination. We prove that a SrO-termination can inhibit the incorporation of oxygen vacancies across the (100)-surfa…
▽ More
We provide insights into the influence of surface termination on the oxygen vacancy incorporation for the perovskite model material SrTiO3 during annealing in reducing gas environments. We present a novel approach to control to tailor the oxygen vacancy formation by controlling the termination. We prove that a SrO-termination can inhibit the incorporation of oxygen vacancies across the (100)-surface and apply this to control their incorporation during thin film growth. Utilizing the conducting interface between LaAlO3 and SrTiO3, we could tailor the oxygen-vacancy based conductivity contribution by the level of SrO termination at the interface.
△ Less
Submitted 13 July, 2019;
originally announced July 2019.