-
Chemical strategies to mitigate electrostatic charging during coffee grinding
Authors:
Joshua Méndez Harper,
Christopher H. Hendon
Abstract:
The process of grinding coffee generates particles with high levels of electrostatic charge, causing a number of detrimental effects including clum**, particle dispersal, and spark discharge. At the brewing level, electrostatic aggregation between particles affects liquid-solid accessibility, leading to variable extraction quality. In this study, we quantify the effectiveness of four charge miti…
▽ More
The process of grinding coffee generates particles with high levels of electrostatic charge, causing a number of detrimental effects including clum**, particle dispersal, and spark discharge. At the brewing level, electrostatic aggregation between particles affects liquid-solid accessibility, leading to variable extraction quality. In this study, we quantify the effectiveness of four charge mitigation strategies. Our data suggests that adding small amounts of water to whole beans pre-grinding, or bombarding the grounds with ions produced from a high-voltage ionizer, are capable of de-electrifying the granular flows. While these techniques helped reduce visible mess, only the static reduction through water inclusion was found to impact the brewing parameters in espresso format coffee. There, wetting coffee with less than 0.05 mL / g resulted in a marked shift in particle size distribution, in part due to preventing clump formation and also liberating fine particles from sticking to the grinder. With all other variables kept constant, this shift resulted in at least 15% higher coffee concentration for espresso extracts prepared from darker roasts. These findings pose financial and sustainability implications, and encourage the widespread implementation of water use to de-electrify coffee during grinding.
△ Less
Submitted 19 December, 2023; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Pb$_9$Cu(PO4)$_6$(OH)$_2$: Phonon bands, Localized Flat Band Magnetism, Models, and Chemical Analysis
Authors:
Yi Jiang,
Scott B. Lee,
Jonah Herzog-Arbeitman,
Jiabin Yu,
Xiaolong Feng,
Haoyu Hu,
Dumitru Călugăru,
Parker S. Brodale,
Eoghan L. Gormley,
Maia Garcia Vergniory,
Claudia Felser,
S. Blanco-Canosa,
Christopher H. Hendon,
Leslie M. Schoop,
B. Andrei Bernevig
Abstract:
In a series of recent reports, doped lead apatite (LK-99) has been proposed as a candidate ambient temperature and pressure superconductor. However, from both an experimental and theoretical perspective, these claims are largely unsubstantiated. To this end, our synthesis and subsequent analysis of an LK-99 sample reveals a multiphase material that does not exhibit high-temperature superconductivi…
▽ More
In a series of recent reports, doped lead apatite (LK-99) has been proposed as a candidate ambient temperature and pressure superconductor. However, from both an experimental and theoretical perspective, these claims are largely unsubstantiated. To this end, our synthesis and subsequent analysis of an LK-99 sample reveals a multiphase material that does not exhibit high-temperature superconductivity. We study the structure of this phase with single-crystal X-ray diffraction (SXRD) and find a structure consistent with doped $\text{Pb}_{10}(\text{PO}_4)_6(\text{OH})_2$. However, the material is transparent which rules out a superconducting nature. From ab initio defect formation energy calculations, we find that the material likely hosts $\text{OH}^-$ anions, rather than divalent $\text{O}^{2-}$ anions, within the hexagonal channels and that Cu substitution is highly thermodynamically disfavored. Phonon spectra on the equilibrium structures reveal numerous unstable phonon modes. Together, these calculations suggest it is doubtful that Cu enters the structure in meaningful concentrations, despite initial attempts to model LK-99 in this way. However for the sake of completeness, we perform ab initio calculations of the topology, quantum geometry, and Wannier function localization in the Cu-dominated flat bands of four separate doped structures. In all cases, we find they are atomically localized by irreps, Wilson loops, and the Fubini-Study metric. It is unlikely that such bands can support strong superfluidity, and instead are susceptible to ferromagnetism (or out-of-plane antiferromagnetism) at low temperatures, which we find in ab initio studies. In sum, $\text{Pb}_{9}\text{Cu}(\text{PO}_4)_6(\text{OH})_2$ could more likely be a magnet, rather than an ambient temperature and pressure superconductor.
△ Less
Submitted 17 August, 2023; v1 submitted 9 August, 2023;
originally announced August 2023.
-
Metal-free perovskites for non-linear optical materials
Authors:
Thomas W. Kasel,
Zeyu Deng,
Austin M. Mroz,
Christopher H. Hendon,
Keith T. Butler,
Pieremanuele Canepa
Abstract:
We identify the existence of nonlinear optical (NLO) activity in a number of novel $ABX_3$-type metal-free perovskites, where $A$ is a highly tuneable organic cation, $B$ is a NH$_4$ cation and $X$ a halide anion. Through systematic first-principles calculations, we identify important trends to chart the second-harmonic generation of this class of materials. We study three perovskites MDABCO-NH…
▽ More
We identify the existence of nonlinear optical (NLO) activity in a number of novel $ABX_3$-type metal-free perovskites, where $A$ is a highly tuneable organic cation, $B$ is a NH$_4$ cation and $X$ a halide anion. Through systematic first-principles calculations, we identify important trends to chart the second-harmonic generation of this class of materials. We study three perovskites MDABCO-NH$_4$I$_3$, CNDABCO-NH$_4$I$_3$ and ODABCO-NH$_4$I$_3$ for use as deep-UV second-harmonic generation materials. We identify the role of the dipole moment imparted by the organic group on the $A$ cation as an important parameter to tune the NLO properties of these materials. We apply this knowledge functionalising the organic group DABCO with the highly polar cyanide CN$^-$ group, and we demonstrate a significant improvement of the NLO response in this family of materials. These findings can accelerate the application of metal free perovskites as inexpensive, non-toxic, earth-abundant materials for the next generation of optical communication applications.
△ Less
Submitted 14 July, 2019;
originally announced July 2019.
-
Surface Restructuring of Nickel Sulfide Generates Optimally-Coordinated Active Sites for ORR Catalysis
Authors:
Bing Yan,
Dilip Krishnamurthy,
Christopher H. Hendon,
Siddharth Deshpande,
Yogesh Surendranath,
Venkatasubramanian Viswanathan
Abstract:
First-row transition metal oxides and chalcogenides have been found to rival the performance of precious metal-based catalysts for the interconversion of water and O$_2$. The high lability of the first-row transition metal ions leads to surface dynamics under the conditions of catalysis and results in active site structures distinct from those expected by surface termination of the bulk lattice. W…
▽ More
First-row transition metal oxides and chalcogenides have been found to rival the performance of precious metal-based catalysts for the interconversion of water and O$_2$. The high lability of the first-row transition metal ions leads to surface dynamics under the conditions of catalysis and results in active site structures distinct from those expected by surface termination of the bulk lattice. While these surface transformations have been well-characterized on many metal oxides, the surface dynamics of heavier chalcogenides under electrocatalytic conditions are largely unknown. We recently reported that the heazlewoodite Ni$_3$S$_2$ bulk phase supports efficient ORR catalysis under benign aqueous conditions and exhibits excellent tolerance to electrolyte anions such as phosphate which poison Pt. Herein, we combine electrochemistry, surface spectroscopy and high resolution microscopy to characterize the surface dynamics of Ni$_3$S$_2$ under ORR catalytic conditions. We show that Ni$_3$S$_2$ undergoes self-limiting oxidative surface restructuring to form an approximately 2 nm amorphous surface film conformally coating the Ni$_3$S$_2$ crystallites. The surface film has a nominal NiS stoichiometry and is highly active for ORR catalysis. Using DFT calculations we show that, to a first approximation, the catalytic activity of nickel sulfides is determined by the Ni-S coordination numbers at surface exposed sites through a simple geometric descriptor. In particular, we find that the surface sites formed dynamically on the surface of amorphous NiS during surface restructuring provide an optimal energetic landscape for ORR catalysis. This work provides a systematic framework for characterizing the rich surface chemistry of metal-chalcogenides and provides principles for develo** a broader understanding of electrocatalysis mediated by amorphous materials.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Crystal structure optimisation using an auxiliary equation of state
Authors:
Adam J. Jackson,
Jonathan M. Skelton,
Christopher H. Hendon,
Keith T. Butler,
Aron Walsh
Abstract:
Standard procedures for local crystal-structure optimisation involve numerous energy and force calculations. It is common to calculate an energy-volume curve, fitting an equation of state around the equilibrium cell volume. This is a computationally intensive process, in particular for low-symmetry crystal structures where each isochoric optimisation involves energy minimisation over many degrees…
▽ More
Standard procedures for local crystal-structure optimisation involve numerous energy and force calculations. It is common to calculate an energy-volume curve, fitting an equation of state around the equilibrium cell volume. This is a computationally intensive process, in particular for low-symmetry crystal structures where each isochoric optimisation involves energy minimisation over many degrees of freedom. Such procedures can be prohibitive for non-local exchange-correlation functionals or other 'beyond' density functional theory electronic structure techniques, particularly where analytical gradients are not available. We present a simple approach for efficient optimisation of crystal structures based on a known equation of state. The equilibrium volume can be predicted from one single-point calculation, and refined with successive calculations if required. The approach is validated for PbS, PbTe, ZnS and ZnTe using nine density functionals, and applied to the quaternary semiconductor Cu$_{2}$ZnSnS$_{4}$ and the magnetic metal-organic framework HKUST-1.
△ Less
Submitted 12 October, 2015; v1 submitted 31 July, 2015;
originally announced July 2015.
-
Atomistic origins of high-performance in hybrid halide perovskite solar cells
Authors:
Jarvist M. Frost,
Keith T. Butler,
Federico Brivio,
Christopher H. Hendon,
Mark van Schilfgaarde,
Aron Walsh
Abstract:
The performance of organometallic perovskite solar cells has rapidly surpassed that of both conventional dye-sensitised and organic photovoltaics. High power conversion efficiency can be realised in both mesoporous and thin-film device architectures. We address the origin of this success in the context of the materials chemistry and physics of the bulk perovskite as described by electronic structu…
▽ More
The performance of organometallic perovskite solar cells has rapidly surpassed that of both conventional dye-sensitised and organic photovoltaics. High power conversion efficiency can be realised in both mesoporous and thin-film device architectures. We address the origin of this success in the context of the materials chemistry and physics of the bulk perovskite as described by electronic structure calculations. In addition to the basic optoelectronic properties essential for an efficient photovoltaic device (spectrally suitable band gap, high optical absorption, low carrier effective masses), the materials are structurally and compositionally flexible. As we show, hybrid perovskites exhibit spontaneous electric polarisation; we also suggest ways in which this can be tuned through judicious choice of the organic cation. The presence of ferroelectric domains will result in internal junctions that may aid separation of photoexcited electron and hole pairs, and reduction of recombination through segregation of charge carriers. The combination of high dielectric constant and low effective mass promotes both Wannier-Mott exciton separation and effective ionisation of donor and acceptor defects. The photoferroic effect could be exploited in nanostructured films to generate a higher open circuit voltage and may contribute to the current-voltage hysteresis observed in perovskite solar cells.
△ Less
Submitted 8 April, 2014; v1 submitted 20 February, 2014;
originally announced February 2014.
-
Electronic chemical potentials of porous metal-organic frameworks
Authors:
Keith T. Butler,
Christopher H. Hendon,
Aron Walsh
Abstract:
The binding energy of an electron in a material is a fundamental characteristic, which determines a wealth of important chemical and physical properties. For metal-organic frameworks this quantity is hitherto unknown. We present a general approach for determining the vacuum level of porous metal-organic frameworks and apply it to obtain the first ionisation energy for six prototype materials inclu…
▽ More
The binding energy of an electron in a material is a fundamental characteristic, which determines a wealth of important chemical and physical properties. For metal-organic frameworks this quantity is hitherto unknown. We present a general approach for determining the vacuum level of porous metal-organic frameworks and apply it to obtain the first ionisation energy for six prototype materials including zeolitic, covalent and ionic frameworks. This approach for valence band alignment can explain observations relating to the electrochemical, optical and electrical properties of porous frameworks.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
