-
Ab initio Calculation of Fluid Properties for Precision Metrology
Authors:
Giovanni Garberoglio,
Christof Gaiser,
Roberto M. Gavioso,
Allan H. Harvey,
Robert Hellmann,
Bogumił Jeziorski,
Karsten Meier,
Michael R. Moldover,
Laurent Pitre,
Krzysztof Szalewicz,
Robin Underwood
Abstract:
Recent advances regarding the interplay between ab initio calculations and metrology are reviewed, with particular emphasis on gas-based techniques used for temperature and pressure measurements. Since roughly 2010, several thermophysical quantities - in particular, virial and transport coefficients - can be computed from first principles without uncontrolled approximations and with rigorously pro…
▽ More
Recent advances regarding the interplay between ab initio calculations and metrology are reviewed, with particular emphasis on gas-based techniques used for temperature and pressure measurements. Since roughly 2010, several thermophysical quantities - in particular, virial and transport coefficients - can be computed from first principles without uncontrolled approximations and with rigorously propagated uncertainties. In the case of helium, computational results have accuracies that exceed the best experimental data by at least one order of magnitude and are suitable to be used in primary metrology. The availability of ab initio virial and transport coefficients contributed to the recent SI definition of temperature by facilitating measurements of the Boltzmann constant with unprecedented accuracy. Presently, they enable the development of primary standards of temperature in the range 2.5-552 K and pressure up to 7 MPa using acoustic gas thermometry, dielectric constant gas thermometry, and refractive index gas thermometry. These approaches will be reviewed, highlighting the effect of first-principles data on their accuracy. The recent advances in electronic structure calculations that enabled highly accurate solutions for the many-body interaction potentials and polarizabilities of atoms - particularly helium - will be described, together with the subsequent computational methods, most often based on quantum statistical mechanics and its path-integral formulation, that provide thermophysical properties and their uncertainties. Similar approaches for molecular systems, and their applications, are briefly discussed. Current limitations and expected future lines of research are assessed.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Light-controllable hybrid aligning layer based on LIPSS on sapphire surface and PVCN-F film
Authors:
I. Gvozdovskyy,
D. Bratova,
Z. Kazantseva,
S. Malyuta,
P. Lytvyn,
S. Schwarz,
R. Hellmann
Abstract:
The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligni…
▽ More
The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligning layers processed by light, is very important. Here, aligning properties of hybrid aligning layers created on the basis of sapphire surfaces additionally coated by photoaligning layer of PVCN-F are studied. These hybrid layers possess the properties of the nano-structured sapphire layer and the photosensitive PVCN-F layer, and complement each other. The irradiation time dependence of the azimuthal anchoring energy of the hybrid layers is studied. By using certain experimental conditions during irradiation of hybrid layers, e.g., polarisation of light and irradiation time, a minimum value of the azimuthal anchoring energy, close to zero, was obtained. Atomic force microscope studies of the irradiated hybrid layers were also carried out. It was found that the behavior of the contact angle of nematic droplets placed on treated sapphire surfaces are in good agreement with properties of hybrid aligning layers and parameters of structuring surface obtained from AFM images.
△ Less
Submitted 12 July, 2023; v1 submitted 3 March, 2023;
originally announced March 2023.
-
Edge effects in radial porosity profiles from CT measurements and melt pool signal intensities for laser powder bed fusion
Authors:
Jorrit Voigt,
Thomas Bock,
Uwe Hilpert,
Ralf Hellmann,
Michael Moeckel
Abstract:
Limited process control can cause metallurgical defect formation and inhomogeneous relative density in laser powder bed fusion manufactured parts. In this study, cylindrical 15-5 PH stainless steel specimens are investigated by computer tomography; it shows an edge enhanced relative density profile. Additionally, the on axis monitoring signal, obtained from recording the thermal radiation of the m…
▽ More
Limited process control can cause metallurgical defect formation and inhomogeneous relative density in laser powder bed fusion manufactured parts. In this study, cylindrical 15-5 PH stainless steel specimens are investigated by computer tomography; it shows an edge enhanced relative density profile. Additionally, the on axis monitoring signal, obtained from recording the thermal radiation of the melt pool, is considered. Analyzing data for the full duration of the building process results in a statistically increased melt pool signature close to the edge corresponding to the density profile. Edge specific patterns in the on axis signal are found by unsupervised times series clustering. The observations are interpreted using finite element method modeling: For exemplary points at the center and edge it shows different local thermal histories attributed to the chosen laser scan pattern. The results motivate a route towards future design of components with locally dependent material parameters.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Albite feldspar dissolution kinetics as a function of the Gibbs free energy at high pCO_2
Authors:
Roland Hellmann,
Damien Daval,
Delphine Tisserand,
François Renard
Abstract:
We are currently measuring the dissolution kinetics of albite feldspar at 100 deg C in the presence of high levels of dissolved CO_2 (pCO_2 = 9 MPa) as a function of the saturation state of the feldspar (Gibbs free energy of reaction, ΔG). The experiments are conducted using a flow through reactor, thereby allowing the dissolution reactions to occur at a fixed pH and at constant, but variable sa…
▽ More
We are currently measuring the dissolution kinetics of albite feldspar at 100 deg C in the presence of high levels of dissolved CO_2 (pCO_2 = 9 MPa) as a function of the saturation state of the feldspar (Gibbs free energy of reaction, ΔG). The experiments are conducted using a flow through reactor, thereby allowing the dissolution reactions to occur at a fixed pH and at constant, but variable saturation states. Preliminary results indicate that at far-from-equilibrium conditions, the dissolution kinetics of albite are defined by a rate plateau, with R \approx 5.0 x 10^{-10} mol m^{-2} s^{-1} at -70 < ΔG < -40 kJ mol^{-1}. At ΔG > -40 kJ mol^{-1}, the rates decrease sharply, revealing a strong inverse relation between the dissolution rate and free energy. Based on the experiments carried out to date, the dissolution rate-free energy data correspond to a highly non-linear and sigmoidal relation, in accord with recent studies.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Numerical modeling of carbon dioxide sequestration on the rate of pressure solution creep in limestone: Preliminary results
Authors:
Francois Renard,
Elisabeth Gundersen,
Roland Hellmann,
Marielle Collombet,
Yvi Le Guen
Abstract:
When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to enhanced dissolution-precipitation processes and a modification of the mechanical and hydrological properties of the rock. This effect is especially important for…
▽ More
When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to enhanced dissolution-precipitation processes and a modification of the mechanical and hydrological properties of the rock. This effect is especially important for limestones given that the solubility and reactivity of carbonates is strongly dependent on pH and the partial pressure of CO2. The main mechanism that couples dissolution, precipitation and rock matrix deformation is commonly referred to as intergranular pressure solution creep (IPS) or pervasive pressure solution creep (PSC). This process involves dissolution at intergranular grain contacts subject to elevated stress, diffusion of dissolved material in an intergranular fluid, and precipitation in pore spaces subject to lower stress. This leads to an overall and pervasive reduction in porosity due to both grain indentation and precipitation in pore spaces. The percolation of CO2-rich fluids may influence on-going compaction due to pressure solution and can therefore potentially affect the reservoir and its long-term CO2 storage capacity. We aim at quantifying this effect by using a 2D numerical model to study the coupling between dissolution-precipitation processes, local mass transfer, and deformation of the rock over long time scales. We show that high partial pressures of dissolved CO2 (up to 30 MPa) significantly increase the rates of compaction by a factor of ~ 50 to ~ 75, and also result in a concomitant decrease in the viscosity of the rock matrix.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.