-
Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits
Authors:
Nathan Lacroix,
Luca Hofele,
Ants Remm,
Othmane Benhayoune-Khadraoui,
Alexander McDonald,
Ross Shillito,
Stefania Lazar,
Christoph Hellings,
Francois Swiadek,
Dante Colao-Zanuz,
Alexander Flasby,
Mohsen Bahrami Panah,
Michael Kerschbaum,
Graham J. Norris,
Alexandre Blais,
Andreas Wallraff,
Sebastian Krinner
Abstract:
Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multi-level structure of qubit implementat…
▽ More
Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multi-level structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement accuracy of $7\cdot 10^{-4}$ in approximately $50\, \mathrm{ns}$ with a low error of $2.5(1)\cdot 10^{-3}$ on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods which do not scale. Our approach does neither require additional control electronics nor on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory
Authors:
François Swiadek,
Ross Shillito,
Paul Magnard,
Ants Remm,
Christoph Hellings,
Nathan Lacroix,
Quentin Ficheux,
Dante Colao Zanuz,
Graham J. Norris,
Alexandre Blais,
Sebastian Krinner,
Andreas Wallraff
Abstract:
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and wide…
▽ More
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and widely-used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only $0.25\,\%$ in 100 ns integration time. Maintaining low readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout mode linewidth, which we quantify by considering the hybridization of the readout-resonator and its dedicated Purcell-filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity, fast, mid-circuit measurements.
△ Less
Submitted 15 July, 2023;
originally announced July 2023.
-
Calibration of Drive Non-Linearity for Arbitrary-Angle Single-Qubit Gates Using Error Amplification
Authors:
Stefania Lazăr,
Quentin Ficheux,
Johannes Herrmann,
Ants Remm,
Nathan Lacroix,
Christoph Hellings,
Francois Swiadek,
Dante Colao Zanuz,
Graham J. Norris,
Mohsen Bahrami Panah,
Alexander Flasby,
Michael Kerschbaum,
Jean-Claude Besse,
Christopher Eichler,
Andreas Wallraff
Abstract:
The ability to execute high-fidelity operations is crucial to scaling up quantum devices to large numbers of qubits. However, signal distortions originating from non-linear components in the control lines can limit the performance of single-qubit gates. In this work, we use a measurement based on error amplification to characterize and correct the small single-qubit rotation errors originating fro…
▽ More
The ability to execute high-fidelity operations is crucial to scaling up quantum devices to large numbers of qubits. However, signal distortions originating from non-linear components in the control lines can limit the performance of single-qubit gates. In this work, we use a measurement based on error amplification to characterize and correct the small single-qubit rotation errors originating from the non-linear scaling of the qubit drive rate with the amplitude of the programmed pulse. With our hardware, and for a 15-ns pulse, the rotation angles deviate by up to several degrees from a linear model. Using purity benchmarking, we find that control errors reach $2\times 10^{-4}$, which accounts for half of the total gate error. Using cross-entropy benchmarking, we demonstrate arbitrary-angle single-qubit gates with coherence-limited errors of $2\times 10^{-4}$ and leakage below $6\times 10^{-5}$. While the exact magnitude of these errors is specific to our setup, the presented method is applicable to any source of non-linearity. Our work shows that the non-linearity of qubit drive line components imposes a limit on the fidelity of single-qubit gates, independent of improvements in coherence times, circuit design, or leakage mitigation when not corrected for.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Intermodulation Distortion in a Josephson Traveling Wave Parametric Amplifier
Authors:
Ants Remm,
Sebastian Krinner,
Nathan Lacroix,
Christoph Hellings,
Francois Swiadek,
Graham Norris,
Christopher Eichler,
Andreas Wallraff
Abstract:
Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout…
▽ More
Josephson traveling wave parametric amplifiers enable the amplification of weak microwave signals close to the quantum limit with large bandwidth, which has a broad range of applications in superconducting quantum computing and in the operation of single-photon detectors. While the large bandwidth allows for their use in frequency-multiplexed detection architectures, an increased number of readout tones per amplifier puts more stringent requirements on the dynamic range to avoid saturation. Here, we characterize the undesired mixing processes between the different frequency-multiplexed tones applied to a Josephson traveling wave parametric amplifier, a phenomenon also known as intermodulation distortion. The effect becomes particularly significant when the amplifier is operated close to its saturation power. Furthermore, we demonstrate that intermodulation distortion can lead to significant crosstalk and reduction of fidelity for multiplexed readout of superconducting qubits. We suggest using large detunings between the pump and signal frequencies to mitigate crosstalk. Our work provides insights into the limitations of current Josephson traveling wave parametric amplifiers and highlights the importance of performing further research on these devices.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Frequency Up-Conversion Schemes for Controlling Superconducting Qubits
Authors:
Johannes Herrmann,
Christoph Hellings,
Stefania Lazar,
Fabian Pfäffli,
Florian Haupt,
Tobias Thiele,
Dante Colao Zanuz,
Graham J. Norris,
Flavio Heer,
Christopher Eichler,
Andreas Wallraff
Abstract:
High-fidelity control of superconducting qubits requires the generation of microwave-frequency pulses precisely tailored on nanosecond timescales. These pulses are most commonly synthesized by up-converting and superimposing two narrow-band intermediate-frequency signals referred to as the in-phase (I) and quadrature (Q) components. While the calibration of their DC-offsets, relative amplitude and…
▽ More
High-fidelity control of superconducting qubits requires the generation of microwave-frequency pulses precisely tailored on nanosecond timescales. These pulses are most commonly synthesized by up-converting and superimposing two narrow-band intermediate-frequency signals referred to as the in-phase (I) and quadrature (Q) components. While the calibration of their DC-offsets, relative amplitude and phase allows one to cancel unwanted sideband and carrier leakage, this IQ mixing approach suffers from the presence of additional spurious frequency components. Here, we experimentally study an alternative approach based on double frequency conversion, which overcomes this challenge and circumvents the need for IQ-calibration. We find a spurious-free dynamic range of more than 70$\,$dB and compare the quality of pulse generation against a state-of-the-art IQ mixing scheme by performing repeated single-qubit randomized benchmarking on a superconducting qubit.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Realizing Repeated Quantum Error Correction in a Distance-Three Surface Code
Authors:
Sebastian Krinner,
Nathan Lacroix,
Ants Remm,
Agustin Di Paolo,
Elie Genois,
Catherine Leroux,
Christoph Hellings,
Stefania Lazar,
Francois Swiadek,
Johannes Herrmann,
Graham J. Norris,
Christian Kraglund Andersen,
Markus Müller,
Alexandre Blais,
Christopher Eichler,
Andreas Wallraff
Abstract:
Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 p…
▽ More
Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 physical qubits in a superconducting circuit we encode quantum information in a distance-three logical qubit building up on recent distance-two error detection experiments. In an error correction cycle taking only $1.1\,μ$s, we demonstrate the preservation of four cardinal states of the logical qubit. Repeatedly executing the cycle, we measure and decode both bit- and phase-flip error syndromes using a minimum-weight perfect-matching algorithm in an error-model-free approach and apply corrections in postprocessing. We find a low error probability of $3\,\%$ per cycle when rejecting experimental runs in which leakage is detected. The measured characteristics of our device agree well with a numerical model. Our demonstration of repeated, fast and high-performance quantum error correction cycles, together with recent advances in ion traps, support our understanding that fault-tolerant quantum computation will be practically realizable.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Realizing Quantum Convolutional Neural Networks on a Superconducting Quantum Processor to Recognize Quantum Phases
Authors:
Johannes Herrmann,
Sergi Masot Llima,
Ants Remm,
Petr Zapletal,
Nathan A. McMahon,
Colin Scarato,
Francois Swiadek,
Christian Kraglund Andersen,
Christoph Hellings,
Sebastian Krinner,
Nathan Lacroix,
Stefania Lazar,
Michael Kerschbaum,
Dante Colao Zanuz,
Graham J. Norris,
Michael J. Hartmann,
Andreas Wallraff,
Christopher Eichler
Abstract:
Quantum computing crucially relies on the ability to efficiently characterize the quantum states output by quantum hardware. Conventional methods which probe these states through direct measurements and classically computed correlations become computationally expensive when increasing the system size. Quantum neural networks tailored to recognize specific features of quantum states by combining un…
▽ More
Quantum computing crucially relies on the ability to efficiently characterize the quantum states output by quantum hardware. Conventional methods which probe these states through direct measurements and classically computed correlations become computationally expensive when increasing the system size. Quantum neural networks tailored to recognize specific features of quantum states by combining unitary operations, measurements and feedforward promise to require fewer measurements and to tolerate errors. Here, we realize a quantum convolutional neural network (QCNN) on a 7-qubit superconducting quantum processor to identify symmetry-protected topological (SPT) phases of a spin model characterized by a non-zero string order parameter. We benchmark the performance of the QCNN based on approximate ground states of a family of cluster-Ising Hamiltonians which we prepare using a hardware-efficient, low-depth state preparation circuit. We find that, despite being composed of finite-fidelity gates itself, the QCNN recognizes the topological phase with higher fidelity than direct measurements of the string order parameter for the prepared states.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Benchmarking Coherent Errors in Controlled-Phase Gates due to Spectator Qubits
Authors:
S. Krinner,
S. Lazar,
A. Remm,
C. K. Andersen,
N. Lacroix,
G. J. Norris,
C. Hellings,
M. Gabureac,
C. Eichler,
A. Wallraff
Abstract:
A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits in…
▽ More
A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits involved in the gate to one or more spectator qubits. We measure the associated gate infidelity using quantum process tomography. In addition, we point out that, due to coupling of the gate qubits to a non-computational state during the gate, two-qubit conditional phase errors are enhanced. Our work is important for understanding limits to the fidelity of two-qubit gates with finite on/off ratio in multi-qubit settings.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Improving the Performance of Deep Quantum Optimization Algorithms with Continuous Gate Sets
Authors:
Nathan Lacroix,
Christoph Hellings,
Christian Kraglund Andersen,
Agustin Di Paolo,
Ants Remm,
Stefania Lazar,
Sebastian Krinner,
Graham J. Norris,
Mihai Gabureac,
Alexandre Blais,
Christopher Eichler,
Andreas Wallraff
Abstract:
Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically re…
▽ More
Variational quantum algorithms are believed to be promising for solving computationally hard problems and are often comprised of repeated layers of quantum gates. An example thereof is the quantum approximate optimization algorithm (QAOA), an approach to solve combinatorial optimization problems on noisy intermediate-scale quantum (NISQ) systems. Gaining computational power from QAOA critically relies on the mitigation of errors during the execution of the algorithm, which for coherence-limited operations is achievable by reducing the gate count. Here, we demonstrate an improvement of up to a factor of 3 in algorithmic performance as measured by the success probability, by implementing a continuous hardware-efficient gate set using superconducting quantum circuits. This gate set allows us to perform the phase separation step in QAOA with a single physical gate for each pair of qubits instead of decomposing it into two C$Z$-gates and single-qubit gates. With this reduced number of physical gates, which scales with the number of layers employed in the algorithm, we experimentally investigate the circuit-depth-dependent performance of QAOA applied to exact-cover problem instances mapped onto three and seven qubits, using up to a total of 399 operations and up to 9 layers. Our results demonstrate that the use of continuous gate sets may be a key component in extending the impact of near-term quantum computers.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Two-User SIMO Interference Channel with TIN: Improper Signaling versus Time-Sharing
Authors:
Christoph Hellings,
Ferhad Askerbeyli,
Wolfgang Utschick
Abstract:
In the two-user Gaussian interference channel with Gaussian inputs and treating interference as noise (TIN), improper complex signals can be beneficial if time-sharing is not allowed or if only the data rates are averaged over several transmit strategies (convex hull formulation). On the other hand, proper (circularly symmetric) signals have recently been shown to be optimal if coded time-sharing…
▽ More
In the two-user Gaussian interference channel with Gaussian inputs and treating interference as noise (TIN), improper complex signals can be beneficial if time-sharing is not allowed or if only the data rates are averaged over several transmit strategies (convex hull formulation). On the other hand, proper (circularly symmetric) signals have recently been shown to be optimal if coded time-sharing is considered, i.e., if both the data rates and the transmit powers are averaged. In this paper, we show that both conclusions remain the same if single-input multiple-output (SIMO) systems with multiple antennas at the receivers are considered. The proof for the case with coded time-sharing is via a novel enhanced channel concept for the two-user SIMO interference channel, which turns out to deliver a tight outer bound to the TIN rate region with coded time-sharing. The result for the case without coded time-sharing is demonstrated by studying specific examples in which a newly proposed composite real gradient-projection method for improper signaling can outperform the globally optimal proper signaling strategy. In addition, we discuss how the achievable TIN rate region with coded time-sharing can be computed numerically.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Maximizing the Partial Decode-and-Forward Rate in the Gaussian MIMO Relay Channel
Authors:
Christoph Hellings,
Patrick Gest,
Thomas Wiegart,
Wolfgang Utschick
Abstract:
It is known that circularly symmetric Gaussian signals are the optimal input signals for the partial decode-and-forward (PDF) coding scheme in the Gaussian multiple-input multiple-output (MIMO) relay channel, but there is currently no method to find the optimal covariance matrices nor to compute the optimal achievable PDF rate since the optimization is a non-convex problem in its original formulat…
▽ More
It is known that circularly symmetric Gaussian signals are the optimal input signals for the partial decode-and-forward (PDF) coding scheme in the Gaussian multiple-input multiple-output (MIMO) relay channel, but there is currently no method to find the optimal covariance matrices nor to compute the optimal achievable PDF rate since the optimization is a non-convex problem in its original formulation. In this paper, we show that it is possible to find a convex reformulation of the problem by means of an approximation and a primal decomposition. We derive an explicit solution for the inner problems as well as an explicit gradient for the outer problem, so that the efficient cutting-plane method can be applied for solving the outer problem. As the accuracy of this provably convergent algorithm might be impaired by the previous approximation, we additionally propose a modified algorithm, for which we cannot give a converge guarantee, but which provides rigorous upper and lower bounds to the optimum of the original rate maximization. In numerical simulations, these bounds become tight in all considered instances of the problem, showing that the proposed method manages to find the global optimum in all these instances.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Mixed Monotonic Programming for Fast Global Optimization
Authors:
Bho Matthiesen,
Christoph Hellings,
Eduard A. Jorswieck,
Wolfgang Utschick
Abstract:
While globally optimal solutions to many convex programs can be computed efficiently in polynomial time, this is, in general, not possible for nonconvex optimization problems. Therefore, locally optimal approaches or other efficient suboptimal heuristics are usually applied for practical implementations. However, there is also a strong interest in computing globally optimal solutions of nonconvex…
▽ More
While globally optimal solutions to many convex programs can be computed efficiently in polynomial time, this is, in general, not possible for nonconvex optimization problems. Therefore, locally optimal approaches or other efficient suboptimal heuristics are usually applied for practical implementations. However, there is also a strong interest in computing globally optimal solutions of nonconvex problems in offline simulations in order to benchmark the faster suboptimal algorithms. Global solutions often rely on monotonicity properties. A common approach is to reformulate problems into a canonical monotonic optimization problem where the monotonicity becomes evident, but this often comes at the cost of nested optimizations, increased numbers of variables, and/or slow convergence. The framework of mixed monotonic programming (MMP) proposed in this paper avoids such performance-deteriorating reformulations by revealing hidden monotonicity properties directly in the original problem formulation. By means of a wide range of application examples from the area of signal processing for communications (including energy efficiency for green communications, resource allocation in interference networks, scheduling for fairness and quality of service, as well as beamformer design in multiantenna systems), we demonstrate that the novel MMP approach leads to tremendous complexity reductions compared to state-of-the-art methods for global optimization. However, the framework is not limited to optimizing communication systems, and we expect that similar speed-ups can be obtained for optimization problems from other areas of research as well.
△ Less
Submitted 27 February, 2020; v1 submitted 17 October, 2019;
originally announced October 2019.
-
Improper Signaling versus Time-Sharing in the Two-User Gaussian Interference Channel with TIN
Authors:
Christoph Hellings,
Wolfgang Utschick
Abstract:
So-called improper complex signals have been shown to be beneficial in the single-antenna two-user Gaussian interference channel under the assumptions that all input signals are Gaussian and that we treat interference as noise (TIN). This result has been obtained under a restriction to pure strategies without time-sharing, and it was extended to the case where the rates, but not the transmit power…
▽ More
So-called improper complex signals have been shown to be beneficial in the single-antenna two-user Gaussian interference channel under the assumptions that all input signals are Gaussian and that we treat interference as noise (TIN). This result has been obtained under a restriction to pure strategies without time-sharing, and it was extended to the case where the rates, but not the transmit powers, may be averaged over several transmit strategies. In this paper, we drop such restrictions and discuss the most general case of coded time-sharing, where both the rates and the powers may be averaged. Since coded time-sharing can in general not be expressed by means of a convex hull of the rate region, we have to account for the possibility of time-sharing already during the optimization of the transmit strategy. By means of a novel channel enhancement argument, we prove a surprising result: proper signals are optimal if coded time-sharing is allowed. In addition to establishing this result, we present an algorithm to compute the corresponding achievable rate region.
△ Less
Submitted 5 February, 2020; v1 submitted 5 August, 2018;
originally announced August 2018.
-
The Optimal Input Distribution for Partial Decode-and-Forward in the MIMO Relay Channel
Authors:
Lennart Gerdes,
Christoph Hellings,
Lorenz Weiland,
Wolfgang Utschick
Abstract:
This paper considers the partial decode-and-forward (PDF) strategy for the Gaussian multiple-input multiple-output (MIMO) relay channel. Unlike for the decode-and-forward (DF) strategy or point-to-point (P2P) transmission, for which Gaussian channel inputs are known to be optimal, the input distribution that maximizes the achievable PDF rate for the Gaussian MIMO relay channel has remained unknown…
▽ More
This paper considers the partial decode-and-forward (PDF) strategy for the Gaussian multiple-input multiple-output (MIMO) relay channel. Unlike for the decode-and-forward (DF) strategy or point-to-point (P2P) transmission, for which Gaussian channel inputs are known to be optimal, the input distribution that maximizes the achievable PDF rate for the Gaussian MIMO relay channel has remained unknown so far. For some special cases, e.g., for relay channels where the optimal PDF strategy reduces to DF or P2P transmission, it could be deduced that Gaussian inputs maximize the PDF rate. For the general case, however, the problem has remained open until now. In this work, we solve this problem by proving that the maximum achievable PDF rate for the Gaussian MIMO relay channel is always attained by Gaussian channel inputs. Our proof relies on the channel enhancement technique, which was originally introduced by Weingarten et al. to derive the (private message) capacity region of the Gaussian MIMO broadcast channel. By combining this technique with a primal decomposition approach, we first establish that jointly Gaussian source and relay inputs maximize the achievable PDF rate for the aligned Gaussian MIMO relay channel. Subsequently, we use a limiting argument to extend this result from the aligned to the general Gaussian MIMO relay channel.
△ Less
Submitted 30 September, 2014;
originally announced September 2014.
