Showing 51–100 of 148 results for author: Heller, R

Exomoon indicators in high-precision transit light curves

Authors: Kai Rodenbeck, René Heller, Laurent Gizon

Abstract: While the solar system contains about 20 times more moons than planets, no moon has been confirmed around any of the thousands of extrasolar planets known so far. Tools for an uncomplicated identification of the most promising exomoon candidates could be beneficial to streamline follow-up studies.} Here we study three exomoon indicators that emerge if well-established planet-only models are fitted… ▽ More While the solar system contains about 20 times more moons than planets, no moon has been confirmed around any of the thousands of extrasolar planets known so far. Tools for an uncomplicated identification of the most promising exomoon candidates could be beneficial to streamline follow-up studies.} Here we study three exomoon indicators that emerge if well-established planet-only models are fitted to a planet-moon transit light curve: transit timing variations (TTVs), transit duration variations (TDVs), and apparent planetary transit radius variations (TRVs). We re-evaluate under realistic conditions the previously proposed exomoon signatures in the TTV and TDV series. We simulate light curves of a transiting exoplanet with a single moon. These model light curves are then fitted with a planet-only transit model, pretending there were no moon, and we explore the resulting TTV, TDV, and TRV series for evidence of the moon. The previously described ellipse in the TTV-TDV diagram of an exoplanet with a moon emerges only for high-density moons. Low-density moons distort the sinusoidal shapes of the TTV and the TDV series due to their photometric contribution to the combined planet-moon transit. Sufficiently large moons can produce periodic apparent TRVs of their host planets that could be observable. We find that Kepler and PLATO have similar performances in detecting the exomoon-induced TRV effect around simulated bright ($m_V=8$) stars. These stars, however, are rare in the Kepler sample but will be abundant in the PLATO sample. Moreover, PLATO's higher cadence yields a stronger TTV signal. The periodogram of the sequence of transit radius measurements can indicate the presence of a moon. The TTV and TDV series of exoplanets with moons can be more complex than previously assumed. We propose that TRVs could be a more promising means to identify exomoons in large exoplanet surveys. △ Less

Submitted 5 April, 2020; originally announced April 2020.

Comments: 13 pages, 9 figures, 1 table

Journal ref: A&A 638, A43 (2020)

CACTUS: A depleted monolithic active timing sensor using a CMOS radiation hard technology

Authors: Yavuz Degerli, Fabrice Guilloux, Claude Guyot, Jean-Pierre Meyer, Ahmimed Ouraou, Philippe Schwemling, Artur Apresyan, Ryan E. Heller, Mohd Meraj, Christian Pena, Si Xie, Tomasz Hemperek

Abstract: The planned luminosity increase at the Large Hadron Collider in the coming years has triggered interest in the use of the particles' time of arrival as additional information in specialized detectors to mitigate the impact of pile-up. The required time resolution is of the order of tens of picoseconds, with a spatial granularity of the order of 1 mm. A time measurement at this precision level will… ▽ More The planned luminosity increase at the Large Hadron Collider in the coming years has triggered interest in the use of the particles' time of arrival as additional information in specialized detectors to mitigate the impact of pile-up. The required time resolution is of the order of tens of picoseconds, with a spatial granularity of the order of 1 mm. A time measurement at this precision level will also be of interest beyond the LHC and beyond high energy particle physics. We present in this paper the first developments towards a radiation hard Depleted Monolithic Active Pixel Sensor (DMAPS), with high-resolution time measurement capability. The technology chosen is a standard high voltage CMOS process, in conjunction with a high resistivity detector material, which has already proven to efficiently detect particles in tracking applications after several hundred of Mrad of irradiation. △ Less

Submitted 6 May, 2020; v1 submitted 9 March, 2020; originally announced March 2020.

Comments: 14 pages, 11 figures

Radial velocity constraints on the long-period transiting planet Kepler-1625 b with CARMENES

Authors: Anina Timmermann, René Heller, Ansgar Reiners, Mathias Zechmeister

Abstract: The star Kepler-1625 recently attracted considerable attention when an analysis of the stellar photometric time series from the Kepler mission was interpreted as showing evidence of a large exomoon around the transiting Jupiter-sized planet candidate Kepler-1625b. We aim to detect the radial velocity (RV) signal imposed by Kepler-1625b (and its putative moon) on the host star or, as the case may b… ▽ More The star Kepler-1625 recently attracted considerable attention when an analysis of the stellar photometric time series from the Kepler mission was interpreted as showing evidence of a large exomoon around the transiting Jupiter-sized planet candidate Kepler-1625b. We aim to detect the radial velocity (RV) signal imposed by Kepler-1625b (and its putative moon) on the host star or, as the case may be, determine an upper limit on the mass of the transiting object. We took a total of 22 spectra of Kepler-1625 using CARMENES, 20 of which were useful. Observations were spread over a total of seven nights between October 2017 and October 2018, covering $125\%$ of one full orbit of Kepler-1625b. We used the automatic Spectral Radial Velocity Analyser (SERVAL) pipeline to deduce the stellar RVs and uncertainties. Then we fitted the RV curve model of a single planet on a Keplerian orbit to the observed RVs using a $χ^2$ minimisation procedure. We derive upper limits on the mass of Kepler-1625b under the assumption of a single planet on a circular orbit. In this scenario, the $1\,σ$, $2\,σ$, and $3\,σ$ confidence upper limits for the mass of Kepler-1625b are $2.90\,M_{\rm J}$, $7.15\,M_{\rm J}$, and $11.60\,M_{\rm J}$, respectively. We present strong evidence for the planetary nature of Kepler-1625b, making it the 10th most long-period confirmed planet known today. Our data does not answer the question about a second, possibly more short-period planet that could be responsible for the observed transit timing variation of Kepler-1625b. △ Less

Submitted 29 January, 2020; originally announced January 2020.

Comments: 5 pages, 3 figures

Journal ref: A&A 635, A59 (2020)

Exoplanet Vision 2050

Authors: René Heller, László Kiss

Abstract: Is there any hope for us to draw a plausible picture of the future of exoplanet research? Here we extrapolate from the first 25 years of exoplanet discovery into the year 2050. If the power law for the cumulative exoplanet count continues, then almost 100,000,000 exoplanets would be known by 2050. Although this number sounds ridiculously large, we find that the power law could plausibly continue u… ▽ More Is there any hope for us to draw a plausible picture of the future of exoplanet research? Here we extrapolate from the first 25 years of exoplanet discovery into the year 2050. If the power law for the cumulative exoplanet count continues, then almost 100,000,000 exoplanets would be known by 2050. Although this number sounds ridiculously large, we find that the power law could plausibly continue until at least as far as 2030, when Gaia and WFIRST will have discovered on the order of 100,000 exoplanets. After an early era of radial velocity detection, we are now in the transit era, which might be followed by a transit and astrometry era dominated by the WFIRST and Gaia missions. And then? Maybe more is not better. A small and informal survey among astronomers at the "Exoplanet Vision 2050" workshop in Budapest suggests that astrobiological topics might influence the future of exoplanet research. △ Less

Submitted 28 November, 2019; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: exoplanet counts updated to include WFIRST; based on an invited talk (RH) at the "Exoplanet Vision 2050" workshop, Konkoly Observatory, 21. Nov. 2019; 2 col. figures

Instanton formulation of Fermi's golden rule in the Marcus inverted regime

Authors: Eric R. Heller, Jeremy O. Richardson

Abstract: Fermi's golden rule defines the transition rate between weakly coupled states and can thus be used to describe a multitude of molecular processes including electron-transfer reactions and light-matter interaction. However, it can only be calculated if the wave functions of all internal states are known, which is typically not the case in molecular systems. Marcus theory provides a closed-form expr… ▽ More Fermi's golden rule defines the transition rate between weakly coupled states and can thus be used to describe a multitude of molecular processes including electron-transfer reactions and light-matter interaction. However, it can only be calculated if the wave functions of all internal states are known, which is typically not the case in molecular systems. Marcus theory provides a closed-form expression for the rate constant, which is a classical limit of the golden rule, and indicates the existence of a normal regime and an inverted regime. Semiclassical instanton theory presents a more accurate approximation to the golden-rule rate including nuclear quantum effects such as tunnelling, which has so far been applicable to complex anharmonic systems in the normal regime only. In this paper we extend the instanton method to the inverted regime and study the properties of the periodic orbit, which describes the tunnelling mechanism via two imaginary-time trajectories, one of which now travels in negative imaginary time. It is known that tunnelling is particularly prevalent in the inverted regime, even at room temperature, and thus this method is expected to be useful in studying a wide range of molecular transitions occurring in this regime. △ Less

Submitted 15 November, 2019; originally announced November 2019.

Journal ref: J. Chem. Phys. 152, 034106, 2020

p-type codo** effect in (Ga,Mn)As: Mn lattice location versus magnetic properties

Authors: Chi Xu, Chenhui Zhang, Mao Wang, Yufang Xie, René Hübner, René Heller, Ye Yuan, Manfred Helm, Xixiang Zhang, Shengqiang Zhou

Abstract: In the present work, we perform a systematic investigation on p-type codo** in (Ga,Mn)As. Through gradually increasing Zn do** concentration, the hole concentration increases, which should theoretically lead to an increase of the Curie temperature (TC) according to the p-d Zener model. Unexpectedly, although the film keeps its epitaxial structure, both TC and the magnetization decrease. The sa… ▽ More In the present work, we perform a systematic investigation on p-type codo** in (Ga,Mn)As. Through gradually increasing Zn do** concentration, the hole concentration increases, which should theoretically lead to an increase of the Curie temperature (TC) according to the p-d Zener model. Unexpectedly, although the film keeps its epitaxial structure, both TC and the magnetization decrease. The samples present a phase transition from ferromagnetism to paramagnetism upon increasing hole concentration. In the intermediate regime, we observe a signature of antiferromagnetism. By using channeling Rutherford backscattering spectrometry and particle-induced x-ray emission, the substitutional Mn atoms are observed to shift to interstitial sites, while more Zn atoms occupy Ga sites, which explains the observed behavior. This is also consistent with first-principles calculations, showing that the complex of substitutional Zn and interstitial Mn has the lowest formation energy. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: 21 pages, 8 figures

Journal ref: Phys. Rev. Materials 3, 084604 (2019)

Quantifying replicability and consistency in systematic reviews

Authors: Iman Jaljuli, Yoav Benjamini, Liat Shenhav, Orestis Panagiotou, Ruth Heller

Abstract: Systematic reviews of interventions are important tools for synthesizing evidence from multiple studies. They serve to increase power and improve precision, in the same way that larger studies can do, but also to establish the consistency of effects and replicability of results across studies which are not identical. In this work we suggest to incorporate replicability analysis tools to quantify t… ▽ More Systematic reviews of interventions are important tools for synthesizing evidence from multiple studies. They serve to increase power and improve precision, in the same way that larger studies can do, but also to establish the consistency of effects and replicability of results across studies which are not identical. In this work we suggest to incorporate replicability analysis tools to quantify the consistency and conflict. These are offered both for the fixed-effect and for the random-effects meta-analyses. We motivate and demonstrate our approach and its implications by examples from systematic reviews from the Cochrane library, and offer a way to incorporate our suggestions in their standard reporting system. △ Less

Submitted 18 April, 2021; v1 submitted 16 July, 2019; originally announced July 2019.

Wotan: Comprehensive time-series de-trending in Python

Authors: Michael Hippke, Trevor J. David, Gijs D. Mulders, René Heller

Abstract: The detection of transiting exoplanets in time-series photometry requires the removal or modeling of instrumental and stellar noise. While instrumental systematics can be reduced using methods such as pixel level decorrelation, removing stellar trends while preserving transit signals proves challenging. Due to vast archives of light curves from recent transit surveys, there is a strong need for ac… ▽ More The detection of transiting exoplanets in time-series photometry requires the removal or modeling of instrumental and stellar noise. While instrumental systematics can be reduced using methods such as pixel level decorrelation, removing stellar trends while preserving transit signals proves challenging. Due to vast archives of light curves from recent transit surveys, there is a strong need for accurate automatic detrending, without human intervention. A large variety of detrending algorithms are in active use, but their comparative performance for transit discovery is unexplored. We benchmark all commonly used detrending methods against hundreds of Kepler, K2, and TESS planets, selected to represent the most difficult cases for systems with small planet-to-star radius ratios. The full parameter range is explored for each method to determine the best choices for planet discovery. We conclude that the ideal method is a time-windowed slider with an iterative robust location estimator based on Tukey's biweight. This method recovers 99% and 94% of the shallowest Kepler and K2 planets, respectively. We include an additional analysis for young stars with extreme variability and conclude they are best treated using a spline-based method with a robust Huber estimator. All stellar detrending methods explored are available for public use in wotan, an open-source Python package on GitHub (see https://github.com/hippke/wotan). △ Less

Submitted 7 August, 2019; v1 submitted 3 June, 2019; originally announced June 2019.

Comments: Accepted to AJ. Code, documentation and tutorials are available at https://github.com/hippke/wotan

Transit least-squares survey -- II. Discovery and validation of 17 new sub- to super-Earth-sized planets in multi-planet systems from K2

Authors: René Heller, Michael Hippke, Kai Rodenbeck

Abstract: The extended Kepler mission (K2) has revealed more than 500 transiting planets in roughly 500,000 stellar light curves. All of these were found either with the box least-squares algorithm or by visual inspection. Here we use our new transit least-squares (TLS) algorithm to search for additional planets around all K2 stars that are currently known to host at least one planet. We discover and statis… ▽ More The extended Kepler mission (K2) has revealed more than 500 transiting planets in roughly 500,000 stellar light curves. All of these were found either with the box least-squares algorithm or by visual inspection. Here we use our new transit least-squares (TLS) algorithm to search for additional planets around all K2 stars that are currently known to host at least one planet. We discover and statistically validate 17 new planets with radii ranging from about 0.7 Earth radii to roughly 2.2 Earth radii and a median radius of 1.18 Earth radii. EPIC201497682.03, with a radius of 0.692 (-0.048, +0.059) Earth radii, is the second smallest planet ever discovered with K2. The transit signatures of these 17 planets are typically 200 ppm deep (ranging from 100 ppm to 2000 ppm), and their orbital periods extend from about 0.7 d to 34 d with a median value of about 4 d. Fourteen of these 17 systems only had one known planet before, and they now join the growing number of multi-planet systems. Most stars in our sample have subsolar masses and radii. The small planetary radii in our sample are a direct result of the higher signal detection efficiency that TLS has compared to box-fitting algorithms in the shallow-transit regime. Our findings help in populating the period-radius diagram with small planets. Our discovery rate of about 3.7 % within the group of previously known K2 systems suggests that TLS can find over 100 additional Earth-sized planets in the data of the Kepler primary mission. △ Less

Submitted 12 July, 2019; v1 submitted 22 May, 2019; originally announced May 2019.

Comments: published in A&A, 12 pages, 6 colored Figures, 1 Table; minor textual corrections; Fig. 5 corrected for the distance scaling

Journal ref: A&A, 2019, Vol. 627, id. A66, 10 pp

Testing for differential abundance in compositional counts data, with application to microbiome studies

Authors: Barak Brill, Amnon Amir, Ruth Heller

Abstract: Identifying which taxa in our microbiota are associated with traits of interest is important for advancing science and health. However, the identification is challenging because the measured vector of taxa counts (by amplicon sequencing) is compositional, so a change in the abundance of one taxon in the microbiota induces a change in the number of sequenced counts across all taxa. The data is typi… ▽ More Identifying which taxa in our microbiota are associated with traits of interest is important for advancing science and health. However, the identification is challenging because the measured vector of taxa counts (by amplicon sequencing) is compositional, so a change in the abundance of one taxon in the microbiota induces a change in the number of sequenced counts across all taxa. The data is typically sparse, with zero counts present either due to biological variance or limited sequencing depth (technical zeros). For low abundance taxa, the chance for technical zeros is non-negligible. We show that existing methods designed to identify differential abundance for compositional data may have an inflated number of false positives due to improper handling of the zero counts. We introduce a novel non-parametric approach which provides valid inference even when the fraction of zero counts is substantial. Our approach uses a set of reference taxa that are non-differentially abundant, which can be estimated from the data or from outside information. We show the usefulness of our approach via simulations, as well as on three different data sets: a Crohn's disease study, the Human Microbiome Project, and an experiment with 'spiked-in' bacteria. △ Less

Submitted 30 March, 2020; v1 submitted 18 April, 2019; originally announced April 2019.

Transit least-squares survey - I. Discovery and validation of an Earth-sized planet in the four-planet system K2-32 near the 1:2:5:7 resonance

Authors: René Heller, Kai Rodenbeck, Michael Hippke

Abstract: We apply, for the first time, the Transit Least Squares (TLS) algorithm to search for new transiting exoplanets. TLS is a successor to the Box Least Squares (BLS) algorithm, which has served as a standard tool for the detection of periodic transits. In this proof-of-concept paper, we demonstrate how TLS finds small planets that have previously been missed. We showcase TLS' capabilities using the K… ▽ More We apply, for the first time, the Transit Least Squares (TLS) algorithm to search for new transiting exoplanets. TLS is a successor to the Box Least Squares (BLS) algorithm, which has served as a standard tool for the detection of periodic transits. In this proof-of-concept paper, we demonstrate how TLS finds small planets that have previously been missed. We showcase TLS' capabilities using the K2 EVEREST-detrended light curve of the star K2-32 (EPIC205071984) that was known to have three transiting planets. TLS detects these known Neptune-sized planets K2-32b, d, and c in an iterative search and finds an additional transit signal with a high signal detection efficiency (SDE_TLS) of 26.1 at a period of 4.34882 (-0.00075, +0.00069) d. We show that this signal remains detectable (SDE_TLS = 13.2) with TLS in the K2SFF light curve of K2-32, which includes a less optimal detrending of the systematic trends. The signal is below common detection thresholds, however, if searched with BLS in the K2SFF light curve (SDE_BLS = 8.9) as in previous searches. Markov Chain Monte Carlo sampling shows that the radius of this candidate is 1.01 (-0.09, +0.10) Earth radii. We analyze its phase-folded transit light curve using the vespa software and calculate a false positive probability FPP = 3.1e-3, formally validating K2-32e as a planet. Taking into account the multiplicity boost of the system, FPP < 3.1e-4. K2-32 now hosts at least four planets that are very close to a 1:2:5:7 mean motion resonance chain. The offset of the orbital periods of K2-32e and b from a 1:2 mean motion resonance is in very good agreement with the sample of transiting multi-planet systems from Kepler, lending further credence to the planetary nature of K2-32e. We expect that TLS can find many more transits of Earth-sized and smaller planets in the Kepler data that have hitherto remained undetected with BLS and similar algorithms. △ Less

Submitted 22 May, 2019; v1 submitted 1 April, 2019; originally announced April 2019.

Comments: published in A&A, Vol. 625, id. A31 , 8 pages, 6 colored figures

Journal ref: A&A 625, A31 (2019)

An alternative interpretation of the exomoon candidate signal in the combined Kepler and Hubble data of Kepler-1625

Authors: René Heller, Kai Rodenbeck, Giovanni Bruno

Abstract: Kepler and Hubble photometry of a total of four transits by the Jupiter-sized Kepler-1625b have recently been interpreted to show evidence of a Neptune-sized exomoon. The profound implications of this first possible exomoon detection and the physical oddity of the proposed moon, that is, its giant radius prompt us to re-examine the data and the Bayesian Information Criterion (BIC) used for detecti… ▽ More Kepler and Hubble photometry of a total of four transits by the Jupiter-sized Kepler-1625b have recently been interpreted to show evidence of a Neptune-sized exomoon. The profound implications of this first possible exomoon detection and the physical oddity of the proposed moon, that is, its giant radius prompt us to re-examine the data and the Bayesian Information Criterion (BIC) used for detection. We combine the Kepler data with the previously published Hubble light curve. In an alternative approach, we perform a synchronous polynomial detrending and fitting of the Kepler data combined with our own extraction of the Hubble photometry. We generate five million MCMC realizations of the data with both a planet-only model and a planet-moon model and compute the BIC difference (DeltaBIC) between the most likely models, respectively. DeltaBIC values of -44.5 (using previously published Hubble data) and -31.0 (using our own detrending) yield strongly support the exomoon interpretation. Most of our orbital realizations, however, are very different from the best-fit solutions, suggesting that the likelihood function that best describes the data is non-Gaussian. We measure a 73.7min early arrival of Kepler-1625b for its Hubble transit at the 3 sigma level, possibly caused by a 1 day data gap near the first Kepler transit, stellar activity, or unknown systematics. The radial velocity amplitude of a possible unseen hot Jupiter causing Kepler-1625b's transit timing variation could be some 100m/s. Although we find a similar solution to the planet-moon model as previously proposed, careful consideration of its statistical evidence leads us to believe that this is not a secure exomoon detection. Unknown systematic errors in the Kepler/Hubble data make the DeltaBIC an unreliable metric for an exomoon search around Kepler-1625b, allowing for alternative interpretations of the signal. △ Less

Submitted 23 April, 2019; v1 submitted 15 February, 2019; originally announced February 2019.

Comments: 8 pages, 5 figures (4 col, 1 b/w), 1 Table, published in A&A, Vol. 624, A95

Journal ref: A&A 624, A95 (2019)

Optimal control of false discovery criteria in the two-group model

Authors: Ruth Heller, Saharon Rosset

Abstract: The highly influential two-group model in testing a large number of statistical hypotheses assumes that the test statistics are drawn independently from a mixture of a high probability null distribution and a low probability alternative. Optimal control of the marginal false discovery rate (mFDR), in the sense that it provides maximal power (expected true discoveries) subject to mFDR control, is k… ▽ More The highly influential two-group model in testing a large number of statistical hypotheses assumes that the test statistics are drawn independently from a mixture of a high probability null distribution and a low probability alternative. Optimal control of the marginal false discovery rate (mFDR), in the sense that it provides maximal power (expected true discoveries) subject to mFDR control, is known to be achieved by thresholding the local false discovery rate (locFDR), i.e., the probability of the hypothesis being null given the set of test statistics, with a fixed threshold. We address the challenge of controlling optimally the popular false discovery rate (FDR) or positive FDR (pFDR) rather than mFDR in the general two-group model, which also allows for dependence between the test statistics. These criteria are less conservative than the mFDR criterion, so they make more rejections in expectation. We derive their optimal multiple testing (OMT) policies, which turn out to be thresholding the locFDR with a threshold that is a function of the entire set of statistics. We develop an efficient algorithm for finding these policies, and use it for problems with thousands of hypotheses. We illustrate these procedures on gene expression studies. △ Less

Submitted 27 May, 2020; v1 submitted 3 February, 2019; originally announced February 2019.

Journal ref: J R Stat Soc Series B (2020)

Transit Least Squares: Optimized transit detection algorithm to search for periodic transits of small planets

Authors: Michael Hippke, René Heller

Abstract: We present a new method to detect planetary transits from time-series photometry, the Transit Least Squares (TLS) algorithm. TLS searches for transit-like features while taking the stellar limb darkening and planetary ingress and egress into account. We have optimized TLS for both signal detection efficiency (SDE) of small planets and computational speed. TLS analyses the entire, unbinned phase-fo… ▽ More We present a new method to detect planetary transits from time-series photometry, the Transit Least Squares (TLS) algorithm. TLS searches for transit-like features while taking the stellar limb darkening and planetary ingress and egress into account. We have optimized TLS for both signal detection efficiency (SDE) of small planets and computational speed. TLS analyses the entire, unbinned phase-folded light curve. We compensate for the higher computational load by (i.) using algorithms like "Mergesort" (for the trial orbital phases) and by (ii.) restricting the trial transit durations to a smaller range that encompasses all known planets, and using stellar density priors where available. A typical K2 light curve, including 80d of observations at a cadence of 30min, can be searched with TLS in ~10s real time on a standard laptop computer, as fast as the widely used Box Least Squares (BLS) algorithm. We perform a transit injection-retrieval experiment of Earth-sized planets around sun-like stars using synthetic light curves with 110ppm white noise per 30min cadence, corresponding to a photometrically quiet KP=12 star observed with Kepler. We determine the SDE thresholds for both BLS and TLS to reach a false positive rate of 1% to be SDE~7 in both cases. The resulting true positive (or recovery) rates are ~93% for TLS and ~76% for BLS, implying more reliable detections with TLS. We also test TLS with the K2 light curve of the TRAPPIST-1 system and find six of seven Earth-sized planets using an iterative search for increasingly lower signal detection efficiency, the phase-folded transit of the seventh planet being affected by a stellar flare. TLS is more reliable than BLS in finding any kind of transiting planet but it is particularly suited for the detection of small planets in long time series from Kepler, TESS, and PLATO. We make our Python implementation of TLS publicly available. △ Less

Submitted 27 January, 2019; v1 submitted 7 January, 2019; originally announced January 2019.

Comments: A&A accepted. Code, documentation and tutorials at https://github.com/hippke/tls

Journal ref: A&A 623, A39 (2019)

Analytic solutions to the maximum and average exoplanet transit depth for common stellar limb darkening laws

Authors: René Heller

Abstract: The depth of an exoplanetary transit in the light curve of a distant star is commonly approximated as the squared planet-to-star radius ratio, (R_p/R_s)^2. Stellar limb darkening, however, results in significantly deeper transits. Here we derive analytical solutions to the overshoot of the mid-transit depth caused by stellar limb darkening compared to the (R_p/R_s)^2 estimate for arbitrary transit… ▽ More The depth of an exoplanetary transit in the light curve of a distant star is commonly approximated as the squared planet-to-star radius ratio, (R_p/R_s)^2. Stellar limb darkening, however, results in significantly deeper transits. Here we derive analytical solutions to the overshoot of the mid-transit depth caused by stellar limb darkening compared to the (R_p/R_s)^2 estimate for arbitrary transit impact parameters. In turn, this allows us to compute the true planet-to-star radius ratio from the transit depth for a given parameterization of a limb darkening law and for a known transit impact parameter. We calculate the maximum emerging specific stellar intensity covered by the planet in transit and derive analytic solutions for the transit depth overshoot. Solutions are presented for the linear, quadratic, square-root, logarithmic, and non-linear stellar limb darkening with arbitrary transit impact parameters. We also derive formulae to calculate the average intensity along the transit chord, which allows us to estimate the actual transit depth (and therefore R_p/R_s) from the mean in-transit flux. The transit depth overshoot of exoplanets compared to the (R_p/R_s)^2 estimate increases from about 15% for A main-sequence stars to roughly 20% for sun-like stars and some 30% for K and M stars. The error in our analytical solutions for R_p/R_s from the small planet approximation is orders of magnitude smaller than the uncertainties arising from typical noise in real light curves and from the uncertain limb darkening. Our equations can be used to predict with high accuracy the expected transit depth of extrasolar planets. The actual planet radius can be calculated from the measured transit depth or from the mean in-transit flux if the stellar limb darkening can be properly parameterized and if the transit impact parameter is known. Light curve fitting is not required. △ Less

Submitted 21 March, 2019; v1 submitted 7 January, 2019; originally announced January 2019.

Comments: 7 pages, 3 figures (2 col, 1 b/w), published in A&A

Journal ref: A&A 623, A137 (2019)

Thermal stability of Te-hyperdoped Si: Atomic-scale correlation of the structural, electrical and optical properties

Authors: Mao Wang, R. Hubner, Chi Xu Yufang Xie, Y. Berencen, R. Heller, L. Rebohle, M. Helm, S. Prucnal, Shengqiang Zhou

Abstract: Si hyperdoped with chalcogens (S, Se, Te) is well-known to possess unique properties such as an insulator-to-metal transition and a room-temperature sub-bandgap absorption. These properties are expected to be sensitive to a post-synthesis thermal annealing, since hyperdoped Si is a thermodynamically metastable material. Thermal stability of the as-fabricated hyperdoped Si is of great importance fo… ▽ More Si hyperdoped with chalcogens (S, Se, Te) is well-known to possess unique properties such as an insulator-to-metal transition and a room-temperature sub-bandgap absorption. These properties are expected to be sensitive to a post-synthesis thermal annealing, since hyperdoped Si is a thermodynamically metastable material. Thermal stability of the as-fabricated hyperdoped Si is of great importance for the device fabrication process involving temperature-dependent steps like ohmic contact formation. Here, we report on the thermal stability of the as-fabricated Te-hyperdoped Si subjected to isochronal furnace anneals from 250 °C to 1200 °C. We demonstrate that Te-hyperdoped Si exhibits thermal stability up to 400 °C with a duration of 10 minutes that even helps to further improve the crystalline quality, the electrical activation of Te dopants and the room-temperature sub-band gap absorption. At higher temperatures, however, Te atoms are found to move out from the substitutional sites with a migration energy of EM = 2.1+/-0.1 eV forming inactive clusters and precipitates that impair the structural, electrical and optical properties. These results provide further insight into the underlying physical state transformation of Te dopants in a metastable compositional regime caused by post-synthesis thermal annealing as well as pave the way for the fabrication of advanced hyperdoped Si-based devices. △ Less

Submitted 4 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. Materials 3, 044606 (2019)

Hot bubbles of planetary nebulae with hydrogen-deficient winds - II. Analytical approximations with application to BD+30$^\circ$3639

Authors: René Heller, Ralf Jacob, Detlef Schönberner, Matthias Steffen

Abstract: The first high-resolution X-ray spectroscopy of the planetary nebula BD+30$^\circ$3639 allowed to study X-ray emitting "hot bubbles" (HBs) of planetary nebulae in unprecedented detail. We investigate (i) how diagnostic line ratios are affected by the HB thermal structure and chemical profile, (ii) if the HB chemical composition of BD+30$^\circ$3639 is consistent with the H-poor (H for hydrogen) co… ▽ More The first high-resolution X-ray spectroscopy of the planetary nebula BD+30$^\circ$3639 allowed to study X-ray emitting "hot bubbles" (HBs) of planetary nebulae in unprecedented detail. We investigate (i) how diagnostic line ratios are affected by the HB thermal structure and chemical profile, (ii) if the HB chemical composition of BD+30$^\circ$3639 is consistent with the H-poor (H for hydrogen) composition of the stellar photosphere, and (iii) if H-rich nebular matter has been added to this HB by evaporation. We apply an analytical, 1D model for wind-blown HBs with temperature and density profiles based on self-similar solutions including thermal conduction. We construct heat-conduction HBs with chemical stratification. The X-ray emission is computed using the CHIANTI code. Our HB models are used to re-analyse the high-resolution X-ray spectrum of BD+30$^\circ$3639. Our models reproduce the observed line ratios much better than plasmas with single electron temperatures. All the temperature- and abundance-sensitive line ratios are consistent with BD+30$^\circ$3639 X-ray observations for (i) an intervening column density of neutral H, $N_{\rm H} = 0.20_{-0.10}^{+0.05}\times\!10^{22}\rm\ cm^{-2}$, (ii) a characteristic HB X-ray temperature of ${T_{\rm X} = 1.8\pm 0.1~ }$MK together with (iii) a very high neon mass fraction of about 0.05, virtually as high as that of oxygen. For lower values of $N_{\rm H}$, we cannot exclude that the HB of BD+30$^\circ$3639 contains a small amount of evaporated (or mixed) H-rich nebular matter. Given the possible range of $N_{\rm H}$, the fraction of evaporated H-rich matter cannot exceed 3% of the HB mass. The diffuse X-ray emission from BD+30$^\circ$3639 can well be explained by models of wind-blown HBs with thermal conduction and a chemical composition equal to that of the H-poor and carbon-, oxygen-, and neon-rich stellar surface. △ Less

Submitted 27 September, 2018; v1 submitted 21 September, 2018; originally announced September 2018.

Comments: 24 pages, 19 figures (col and b/w), 4 tables, accepted for publication in A&A, Fig. 18 adapted to accepted version

Journal ref: A&A 620, A98 (2018)

Breaking the do** limit in silicon by deep impurities

Authors: Mao Wang, A. Debernardi, Y. Berencén, R. Heller, Chi Xu, Ye Yuan, Yufang Xie, R. Böttger, L. Rebohle, W. Skorupa, M. Helm, S. Prucnal, Shengqiang Zhou

Abstract: N-type do** in Si by shallow impurities, such as P, As and Sb, exhibits an intrinsic limit due to the Fermi-level pinning via defect complexes at high do** concentrations. Here we demonstrate that do** Si with the chalcogen Te by non-equilibrium processing, a deep double donor, can exceed this limit and yield higher electron concentrations. In contrast to shallow impurities, both the interst… ▽ More N-type do** in Si by shallow impurities, such as P, As and Sb, exhibits an intrinsic limit due to the Fermi-level pinning via defect complexes at high do** concentrations. Here we demonstrate that do** Si with the chalcogen Te by non-equilibrium processing, a deep double donor, can exceed this limit and yield higher electron concentrations. In contrast to shallow impurities, both the interstitial Te fraction decreases with increasing do** concentration and substitutional Te dimers become the dominant configuration as effective donors, leading to a non-saturating carrier concentration as well as to an insulator-to-metal transition. First-principle calculations reveal that the Te dimers possess the lowest formation energy and donate two electrons per dimer to the conduction band. These results provide novel insight into physics of deep impurities and lead to a possible solution for the ultra-high electron concentration needed in today's Si-based nanoelectronics. △ Less

Submitted 1 November, 2018; v1 submitted 17 September, 2018; originally announced September 2018.

Comments: 26 pages, including the suppl information

Journal ref: Phys. Rev. Applied 11, 054039 (2019)

Extended Infrared Photoresponse in Te-Hyperdoped Si at Room Temperature

Authors: Mao Wang, Y. Berencén, E. García-Hemme, S. Prucnal, R. Hübner, Ye Yuan, Chi Xu, L. Rebohle, R. Böttger, R. Heller, H. Schneider, W. Skorupa, M. Helm, Shengqiang Zhou

Abstract: Presently, silicon photonics requires photodetectors that are sensitive in a broad infrared range, can operate at room temperature, and are suitable for integration with the existing Si-technology process. Here, we demonstrate strong room-temperature sub-band-gap photoresponse of photodiodes based on Si hyperdoped with tellurium. The epitaxially recrystallized Te-hyperdoped Si layers are developed… ▽ More Presently, silicon photonics requires photodetectors that are sensitive in a broad infrared range, can operate at room temperature, and are suitable for integration with the existing Si-technology process. Here, we demonstrate strong room-temperature sub-band-gap photoresponse of photodiodes based on Si hyperdoped with tellurium. The epitaxially recrystallized Te-hyperdoped Si layers are developed by ion implantation combined with pulsed-laser melting and incorporate Te-dopant concentrations several orders of magnitude above the solid solubility limit. With increasing Te concentration, the Te-hyperdoped layer changes from insulating to quasi-metallic behavior with a finite conductivity as the temperature tends to zero. The optical absorptance is found to increase monotonically with increasing Te concentration and extends well into the mid-infrared range. Temperature-dependent optoelectronic photoresponse unambiguously demonstrates that the extended infrared photoresponsivity from Te-hyperdoped Si p-n photodiodes is mediated by a Te intermediate band within the upper half of the Si band gap. This work contributes to pave the way toward establishing a Si-based broadband infrared photonic system operating at room temperature. △ Less

Submitted 4 September, 2018; originally announced September 2018.

Comments: 18 pages, 7 figures

Journal ref: Phys. Rev. Applied 10, 024054 (2018)

Exploring exomoon atmospheres with an idealized general circulation model

Authors: Jacob Haqq-Misra, René Heller

Abstract: Recent studies have shown that large exomoons can form in the accretion disks around super-Jovian extrasolar planets. These planets are abundant at about 1 AU from Sun-like stars, which makes their putative moons interesting for studies of habitability. Technological advances could soon make an exomoon discovery with Kepler or the upcoming CHEOPS and PLATO space missions possible. Exomoon climates… ▽ More Recent studies have shown that large exomoons can form in the accretion disks around super-Jovian extrasolar planets. These planets are abundant at about 1 AU from Sun-like stars, which makes their putative moons interesting for studies of habitability. Technological advances could soon make an exomoon discovery with Kepler or the upcoming CHEOPS and PLATO space missions possible. Exomoon climates might be substantially different from exoplanet climates because the day-night cycles on moons are determined by the moon's synchronous rotation with its host planet. Moreover, planetary illumination at the top of the moon's atmosphere and tidal heating at the moon's surface can be substantial, which can affect the redistribution of energy on exomoons. Using an idealized general circulation model with simplified hydrologic, radiative, and convective processes, we calculate surface temperature, wind speed, mean meridional circulation, and energy transport on a 2.5 Mars-mass moon orbiting a 10-Jupiter-mass at 1 AU from a Sun-like star. The strong thermal irradiation from a young giant planet causes the satellite's polar regions to warm, which remains consistent with the dynamically-driven polar amplification seen in Earth models that lack ice-albedo feedback. Thermal irradiation from young, luminous giant planets onto water-rich exomoons can be strong enough to induce water loss on a planet, which could lead to a runaway greenhouse. Moons that are in synchronous rotation with their host planet and do not experience a runaway greenhouse could experience substantial polar melting induced by the polar amplification of planetary illumination and geothermal heating from tidal effects. △ Less

Submitted 18 June, 2018; originally announced June 2018.

Comments: Accepted for publication in MNRAS

Formation of hot Jupiters through disk migration and evolving stellar tides

Authors: René Heller

Abstract: Here we address the hot Jupiter (hJ) pile-up at 0.05 AU around young solar-type stars observed in stellar radial velocity surveys, the hJ longterm orbital stability in the presence of stellar tides, and the hJ occurrence rate of 1.2 (+-0.38)% in one framework. We calculate the combined torques on the planet from the stellar dynamical tide and from the protoplanetary disk in the type II migration r… ▽ More Here we address the hot Jupiter (hJ) pile-up at 0.05 AU around young solar-type stars observed in stellar radial velocity surveys, the hJ longterm orbital stability in the presence of stellar tides, and the hJ occurrence rate of 1.2 (+-0.38)% in one framework. We calculate the combined torques on the planet from the stellar dynamical tide and from the protoplanetary disk in the type II migration regime. We model a 2D nonisothermal viscous disk parameterized to reproduce the minimum-mass solar nebula and simulate an inner disk cavity at various radial positions near the star. We choose stellar rotation periods according to observations of young star clusters. The planet is on a circular orbit in the disk midplane and in the star's equatorial plane. We show that the torques can add up to zero beyond the corotation radius around young stars and stop inward migration. Monte Carlo simulations predict hot Jupiter survival rates between ~3% (alpha disk viscosity of 1e-1) and 15% (alpha = 1e-3). Once the protoplanetary disk has been fully accreted, the surviving hJs are pushed outward from their tidal migration barrier and pile up near 0.05 AU, as we demonstrate using a numerical implementation of a stellar dynamical tide model. Orbital decay is negligible on a one-billion-year timescale due to the contraction of the highly dissipative convective envelopes in young Sun-like stars. We find that the higher pile-up efficiency around metal-rich stars can at least partly explain the observed positive correlation between stellar metallicity and hJ occurrence. Combined with the observed hJ occurrence rate, our results for the survival rate imply that <8 % (alpha = 1e-3) to <43 % (alpha = 1e-1) of sun-like stars initially encounter an inward migrating hJ. This reconciles models and observations of young spinning stars with the observed hJ pile up and hJ occurrence rates. △ Less

Submitted 4 July, 2019; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: accepted by A&A (30 June 2019), 14 pages, 12 figures (6 col, 6 b/w)

Journal ref: A&A 628, A42 (2019)

Revisiting the exomoon candidate signal around Kepler-1625b

Authors: Kai Rodenbeck, René Heller, Michael Hippke, Laurent Gizon

Abstract: Transit photometry of the exoplanet candidate Kepler-1625b has recently been interpreted to show hints of a moon. We aim to clarify whether the exomoon-like signal is really caused by a large object in orbit around Kepler-1625b. We explore several detrending procedures, i.e. polynomials and the Cosine Filtering with Autocorrelation Minimization (CoFiAM). We then supply a light curve simulator with… ▽ More Transit photometry of the exoplanet candidate Kepler-1625b has recently been interpreted to show hints of a moon. We aim to clarify whether the exomoon-like signal is really caused by a large object in orbit around Kepler-1625b. We explore several detrending procedures, i.e. polynomials and the Cosine Filtering with Autocorrelation Minimization (CoFiAM). We then supply a light curve simulator with the co-planar orbital dynamics of the system and fit the resulting planet-moon transit light curves to the Kepler data. We employ the Bayesian Information Criterion (BIC) to assess whether a single planet or a planet-moon system is a more likely interpretation of the light curve variations. We carry out a blind hare-and-hounds exercise using many noise realizations by injecting simulated transits into different out-of-transit parts of the original Kepler-1625 data: 100 sequences with 3 synthetic transits of a Kepler-1625b-like planet and 100 sequences with 3 synthetic transits of this planet with a Neptune-sized moon. The statistical significance and characteristics of the exomoon-like signal strongly depend on the detrending method, and the data chosen for detrending, and on the treatment of gaps in the light curve. Our injection-retrieval experiment shows evidence for moons in about 10% of those light curves that do not contain an injected moon. Strikingly, many of these false-positive moons resemble the exomoon candidate. We recover up to about half of the injected moons, depending on the detrending method, with radii and orbital distances broadly corresponding to the injected values. A $Δ$BIC of -4.9 for the CoFiAM-based detrending indicates an exomoon around Kepler-1625b. This solution, however, is only one out of many and we find very different solutions depending on the details of the detrending method. It is worrying that the detrending is key to the interpretation of the data. △ Less

Submitted 26 June, 2018; v1 submitted 12 June, 2018; originally announced June 2018.

Comments: 16 pages, 12 figures. Accepted for publication by A&A

Journal ref: A&A 617, A49 (2018)

Optimal and Maximin Procedures for Multiple Testing Problems

Authors: Saharon Rosset, Ruth Heller, Amichai Painsky, Ehud Aharoni

Abstract: Multiple testing problems are a staple of modern statistical analysis. The fundamental objective of multiple testing procedures is to reject as many false null hypotheses as possible (that is, maximize some notion of power), subject to controlling an overall measure of false discovery, like family-wise error rate (FWER) or false discovery rate (FDR). In this paper we formulate multiple testing of… ▽ More Multiple testing problems are a staple of modern statistical analysis. The fundamental objective of multiple testing procedures is to reject as many false null hypotheses as possible (that is, maximize some notion of power), subject to controlling an overall measure of false discovery, like family-wise error rate (FWER) or false discovery rate (FDR). In this paper we formulate multiple testing of simple hypotheses as an infinite-dimensional optimization problem, seeking the most powerful rejection policy which guarantees strong control of the selected measure. In that sense, our approach is a generalization of the optimal Neyman-Pearson test for a single hypothesis. We show that for exchangeable hypotheses, for both FWER and FDR and relevant notions of power, these problems can be formulated as infinite linear programs and can in principle be solved for any number of hypotheses. We also characterize maximin rules for complex alternatives, and demonstrate that such rules can be found in practice, leading to improved practical procedures compared to existing alternatives. We derive explicit optimal tests for FWER or FDR control for three independent normal means. We find that the power gain over natural competitors is substantial in all settings examined. Finally, we apply our optimal maximin rule to subgroup analyses in systematic reviews from the Cochrane library, leading to an increase in the number of findings while guaranteeing strong FWER control against the one sided alternative. △ Less

Submitted 25 November, 2020; v1 submitted 26 April, 2018; originally announced April 2018.

Investigating Planet Formation and Evolutionary Processes with Short-Period Exoplanets

Authors: Brian Jackson, Elisabeth Adams, René Heller, Michael Endl

Abstract: From wispy gas giants on the verge of disruption to tiny rocky bodies already falling apart, short-period exoplanets pose a severe puzzle to theories of planet formation and orbital evolution. By far most of the planets known beyond the solar system orbit their stars in much tighter orbits than the most close-in planet in the solar system, Mercury. Short-period planets experienced dynamical and ev… ▽ More From wispy gas giants on the verge of disruption to tiny rocky bodies already falling apart, short-period exoplanets pose a severe puzzle to theories of planet formation and orbital evolution. By far most of the planets known beyond the solar system orbit their stars in much tighter orbits than the most close-in planet in the solar system, Mercury. Short-period planets experienced dynamical and evolutions histories distinct from their farther-out cousins, and so it's not clear they are representative of all planets. These exoplanets typically have radii between about 1 and 4 Earth radii, whereas the solar system does not contain any planet in this radius range. And while the most massive planets in the solar system occupy the icy regions beyond about 5 AU from the sun, about 1% of sun-like stars have a Jupiter-mass planet near 0.05 AU, with just a few days of an orbital period. How did these short-period planets get there? Did they form in-situ, or did they migrate towards their contemporary orbits? If they migrated, what prevented them from falling into their stars? Vice versa, could some of the remaining 99% of stars without such a hot Jupiter show evidence of their past consumption of a close-in, massive planet? The proximity between short-period planets and their host stars naturally facilitates observational studies, and so short-period planets dominate our observational constraints on planetary composition, internal structure, meteorology, and more. This white paper discusses the unique advantages of short-period planets for the theoretical and observational investigations of exoplanets in general and of their host stars. △ Less

Submitted 27 March, 2018; originally announced March 2018.

Comments: White Paper submitted to National Academy of Sciences Exoplanet Science Strategy call

Photogravimagnetic assists of light sails: a mixed blessing for Breakthrough Starshot?

Authors: Duncan H. Forgan, René Heller, Michael Hippke

Abstract: Upon entering a star system, light sails are subject to both gravitational forces and radiation pressure, and can use both in concert to modify their trajectory. Moreover, stars possess significant magnetic fields, and if the sail is in any way charged, it will feel the Lorentz force also. We investigate the dynamics of so-called "photogravimagnetic assists" of sailcraft around $α$ Centauri A, a… ▽ More Upon entering a star system, light sails are subject to both gravitational forces and radiation pressure, and can use both in concert to modify their trajectory. Moreover, stars possess significant magnetic fields, and if the sail is in any way charged, it will feel the Lorentz force also. We investigate the dynamics of so-called "photogravimagnetic assists" of sailcraft around $α$ Centauri A, a potential first destination en route to Proxima Centauri (the goal of the Breakthrough Starshot program). We find that a 10m$^2$ sail with a charge-to-mass-ratio of around 10 $μ$C/g or higher will need to take account of magnetic field effects during orbital maneouvres. The magnetic field can provide an extra source of deceleration and deflection, and allow capture onto closer orbits around a target star. However, flip** the sign of the sailcraft's charge can radically change resulting trajectories, resulting in complex loop-de-loops around magnetic field lines and essentially random ejection from the star system. Even on well-behaved trajectories, the field can generate off-axis deflections at $α$ Centauri that, while minor, can result in very poor targetting of the final destination (Proxima) post-assist. Fortunately for Breakthrough Starshot, nanosails are less prone to charging en route than their heavier counterparts, but can still accrue relatively high charge at both the origin and destination, when travelling at low speeds. Photogravimagnetic assists are highly non-trivial, and require careful course correction to mitigate against unwanted changes in trajectory. △ Less

Submitted 30 October, 2017; originally announced November 2017.

Comments: 10 pages, 8 figures, accepted for publication in MNRAS

Post-selection estimation and testing following aggregated association tests

Authors: Ruth Heller, Amit Meir, Nilanjan Chatterjee

Abstract: The practice of pooling several individual test statistics to form aggregate tests is common in many statistical application where individual tests may be underpowered. While selection by aggregate tests can serve to increase power, the selection process invalidates the individual test-statistics, making it difficult to identify the ones that drive the signal in follow-up inference. Here, we devel… ▽ More The practice of pooling several individual test statistics to form aggregate tests is common in many statistical application where individual tests may be underpowered. While selection by aggregate tests can serve to increase power, the selection process invalidates the individual test-statistics, making it difficult to identify the ones that drive the signal in follow-up inference. Here, we develop a general approach for valid inference following selection by aggregate testing. We present novel powerful post-selection tests for the individual null hypotheses which are exact for the normal model and asymptotically justified otherwise. Our approach relies on the ability to characterize the distribution of the individual test statistics after conditioning on the event of selection. We provide efficient algorithms for estimation of the post-selection maximum-likelihood estimates and suggest confidence intervals which rely on a novel switching regime for good coverage guarantees. We validate our methods via comprehensive simulation studies and apply them to data from the Dallas Heart Study, demonstrating that single variant association discovery following selection by an aggregated test is indeed possible in practice. △ Less

Submitted 1 November, 2017; originally announced November 2017.

Comments: 33 pages, 9 figures

Journal ref: J. R. Stat. Soc. B, 81 (2019): 547-573

The nature of the giant exomoon candidate Kepler-1625 b-i

Authors: René Heller

Abstract: The recent announcement of a Neptune-sized exomoon candidate around the transiting Jupiter-sized object Kepler-1625 b could indicate the presence of a hitherto unknown kind of gas giant moons, if confirmed. Three transits have been observed, allowing radius estimates of both objects. Here we investigate possible mass regimes of the transiting system that could produce the observed signatures and s… ▽ More The recent announcement of a Neptune-sized exomoon candidate around the transiting Jupiter-sized object Kepler-1625 b could indicate the presence of a hitherto unknown kind of gas giant moons, if confirmed. Three transits have been observed, allowing radius estimates of both objects. Here we investigate possible mass regimes of the transiting system that could produce the observed signatures and study them in the context of moon formation in the solar system, i.e. via impacts, capture, or in-situ accretion. The radius of Kepler-1625 b suggests it could be anything from a gas giant planet somewhat more massive than Saturn (0.4 M_Jup) to a brown dwarf (BD) (up to 75 M_Jup) or even a very-low-mass star (VLMS) (112 M_Jup ~ 0.11 M_sun). The proposed companion would certainly have a planetary mass. Possible extreme scenarios range from a highly inflated Earth-mass gas satellite to an atmosphere-free water-rock companion of about 180 M_Ear. Furthermore, the planet-moon dynamics during the transits suggest a total system mass of 17.6_{-12.6}^{+19.2} M_Jup. A Neptune-mass exomoon around a giant planet or low-mass BD would not be compatible with the common mass scaling relation of the solar system moons about gas giants. The case of a mini-Neptune around a high-mass BD or a VLMS, however, would be located in a similar region of the satellite-to-host mass ratio diagram as Proxima b, the TRAPPIST-1 system, and LHS 1140 b. The capture of a Neptune-mass object around a 10 M_Jup planet during a close binary encounter is possible in principle. The ejected object, however, would have had to be a super-Earth object, raising further questions of how such a system could have formed. In summary, this exomoon candidate is barely compatible with established moon formation theories. If it can be validated as orbiting a super-Jovian planet, then it would pose an exquisite riddle for formation theorists to solve. △ Less

Submitted 27 February, 2018; v1 submitted 17 October, 2017; originally announced October 2017.

Comments: 6 pages, 3 figures (2 col, 1b/w), 1 table, published in A&A

Journal ref: A&A 610, A39 (2018)

Transit Visibility Zones of the Solar System Planets

Authors: R. Wells, K. Poppenhaeger, C. A. Watson, R. Heller

Abstract: The detection of thousands of extrasolar planets by the transit method naturally raises the question of whether potential extrasolar observers could detect the transits of the Solar System planets. We present a comprehensive analysis of the regions in the sky from where transit events of the Solar System planets can be detected. We specify how many different Solar System planets can be observed fr… ▽ More The detection of thousands of extrasolar planets by the transit method naturally raises the question of whether potential extrasolar observers could detect the transits of the Solar System planets. We present a comprehensive analysis of the regions in the sky from where transit events of the Solar System planets can be detected. We specify how many different Solar System planets can be observed from any given point in the sky, and find the maximum number to be three. We report the probabilities of a randomly positioned external observer to be able to observe single and multiple Solar System planet transits; specifically, we find a probability of 2.518% to be able to observe at least one transiting planet, 0.229% for at least two transiting planets, and 0.027% for three transiting planets. We identify 68 known exoplanets that have a favourable geometric perspective to allow transit detections in the Solar System and we show how the ongoing K2 mission will extend this list. We use occurrence rates of exoplanets to estimate that there are $3.2\pm1.2$ and $6.6^{+1.3}_{-0.8}$ temperate Earth-sized planets orbiting GK and M dwarf stars brighter than $V=13$ and $V=16$ respectively, that are located in the Earth's transit zone. △ Less

Submitted 7 September, 2017; originally announced September 2017.

Comments: Accepted for publication in MNRAS

Realizing the insulator-to-metal transition in Se-hyperdoped Si via non-equilibrium material processing

Authors: F. Liu, S. Prucnal, Y. Berencén, Z. Zhang, Y. Yuan, Y. Liu, R. Heller, R. Boettger, L. Rebohle, W. Skorupa, M. Helm, S. Zhou

Abstract: We report on the insulator-to-metal transition in Se-hyperdoped Si layers driven by manipulating the Se concentration via non-equilibrium material processing, i.e. ion implantation followed by millisecond-flash lamp annealing. Electrical transport measurements reveal an increase of carrier concentration and conductivity with increasing Se concentration. For the semi-insulating sample with Se conce… ▽ More We report on the insulator-to-metal transition in Se-hyperdoped Si layers driven by manipulating the Se concentration via non-equilibrium material processing, i.e. ion implantation followed by millisecond-flash lamp annealing. Electrical transport measurements reveal an increase of carrier concentration and conductivity with increasing Se concentration. For the semi-insulating sample with Se concentrations below the Mott limit, quantitative analysis of the temperature dependence of conductivity indicates a variable-range hop** mechanism with an exponent of s = 1/2 rather than 1/4, which implies a Coulomb gap at the Fermi level. The observed insulator-to-metal transition is attributed to the formation of an intermediate band in the Se-hyperdoped Si layers. △ Less

Submitted 28 July, 2017; originally announced July 2017.

Comments: 10 pages, 4 figures, accepted by J. Phys. D: Appl. Phys

Exomoon Habitability and Tidal Evolution in Low-Mass Star Systems

Authors: Rhett R. Zollinger, John C. Armstrong, René Heller

Abstract: Discoveries of extrasolar planets in the habitable zone (HZ) of their parent star lead to questions about the habitability of massive moons orbiting planets in the HZ. Around low-mass stars, the HZ is much closer to the star than for Sun-like stars. For a planet-moon binary in such a HZ, the proximity of the star forces a close orbit for the moon to remain gravitationally bound to the planet. Unde… ▽ More Discoveries of extrasolar planets in the habitable zone (HZ) of their parent star lead to questions about the habitability of massive moons orbiting planets in the HZ. Around low-mass stars, the HZ is much closer to the star than for Sun-like stars. For a planet-moon binary in such a HZ, the proximity of the star forces a close orbit for the moon to remain gravitationally bound to the planet. Under these conditions the effects of tidal heating, distortion torques, and stellar perturbations become important considerations for exomoon habitability. Utilizing a model that considers both dynamical and tidal interactions simultaneously, we performed a computational investigation into exomoon evolution for systems in the HZ of low-mass stars ($\lesssim 0.6\ M_{\odot}$). We show that dwarf stars with masses $\lesssim 0.2\ M_{\odot}$ cannot host habitable exomoons within the stellar HZ due to extreme tidal heating in the moon. Perturbations from a central star may continue to have deleterious effects in the HZ up to $\approx 0.5\ M_{\odot}$, depending on the host planet's mass and its location in the HZ, amongst others. In addition to heating concerns, torques due to tidal and spin distortion can lead to the relatively rapid inward spiraling of a moon. Therefore, moons of giant planets in HZs around the most abundant type of star are unlikely to have habitable surfaces. In cases with lower intensity tidal heating the stellar perturbations may have a positive influence on exomoon habitability by promoting long-term heating and possibly extending the HZ for exomoons. △ Less

Submitted 21 July, 2017; originally announced July 2017.

Comments: accepted by MNRAS, 20 pages, 8 figures in main text (7 col, 1 b/w)

Decryption of Messages from Extraterrestrial Intelligence Using the Power of Social Media - The SETI Decrypt Challenge

Authors: René Heller

Abstract: With the advent of modern astronomy, humans might now have acquired the technological and intellectual requirements to communicate with other intelligent beings beyond the solar system, if they exist. Radio signals have been identified as a means for interstellar communication about 60 years ago. And the Square Kilometer Array will be capable of detecting extrasolar radio sources analogous to terr… ▽ More With the advent of modern astronomy, humans might now have acquired the technological and intellectual requirements to communicate with other intelligent beings beyond the solar system, if they exist. Radio signals have been identified as a means for interstellar communication about 60 years ago. And the Square Kilometer Array will be capable of detecting extrasolar radio sources analogous to terrestrial high-power radars out to several tens of light years. The ultimate question is: will we be able to understand the message, or, vice versa, if we submit a message to extraterrestrial intelligence first, how can we make sure that they understand us? Here I report on the largest blind experiment of a pretend radio message received on Earth from beyond the solar system. I posted a sequence of about two million binary digits ("0" and "1") to the social media that encoded a configuration frame, two slides with mathematical content, and four images along with spatial and temporal information about their contents. Six questions were asked that would need to be answered to document the successful decryption of the message. Within a month after the posting, over 300 replies were received in total, including comments and requests for hints, 66 of which contained the correct solutions. About half of the solutions were derived fully independently, the other half profited from public online discussions and spoilers. This experiment demonstrates the power of the world wide web to help interpreting possible future messages from extraterrestrial intelligence and to test decryptability of our own deliberate interstellar messages. △ Less

Submitted 26 January, 2018; v1 submitted 2 June, 2017; originally announced June 2017.

Comments: accepted by the International Journal of Astrobiology (Cambridge University Press), 11 pages, 3 figures (2 col, 1 b/w), 1 table, Fig. 2 (top) updated, original SETI Decrypt Challenge call at https://twitter.com/DrReneHeller/status/724935476327624704, python code available at http://bit.ly/2rs9jw9

Relativistic Generalization of the Incentive Trap of Interstellar Travel with Application to Breakthrough Starshot

Authors: René Heller

Abstract: As new concepts of sending interstellar spacecraft to the nearest stars are now being investigated by various research teams, crucial questions about the timing of such a vast financial and labor investment arise. If humanity could build high-speed interstellar lightsails and reach the alpha Centauri system 20 yr after launch, would it be better to wait a few years, then take advantage of further… ▽ More As new concepts of sending interstellar spacecraft to the nearest stars are now being investigated by various research teams, crucial questions about the timing of such a vast financial and labor investment arise. If humanity could build high-speed interstellar lightsails and reach the alpha Centauri system 20 yr after launch, would it be better to wait a few years, then take advantage of further technology improvements to increase the speed, and arrive earlier despite waiting? The risk of being overtaken by a future, faster probe has been described earlier as the incentive trap. Based on 211 yr of historical data, we find that the speed growth of human-made vehicles, from steam-driven locomotives to Voyager 1, is much faster than previously believed, about 4.72 % annually or a doubling every 15 yr. We derive the mathematical framework to calculate the minimum of the wait time (t) plus travel time (tau(t)) and extend two exponential growth law models into the relativistic regime. We show that the minimum of t+tau(t) disappears for nearby targets. There is no use of waiting for speed improvements once we can reach an object within about 20 yr of travel, irrespective of the actual speed. In terms of speed, the t+tau(t) minimum for a travel to alpha Centauri will occur once 19.6 % the speed of light (c) become available, in agreement with the 20 % c proposed by the Breakthrough Starshot Initiative. If interstellar travel at 20 % c can be obtained within 45 yr from today and if the kinetic energy could be increased at a rate consistent with the historical record, then humans can reach the ten most nearby stars within 100 yr from today. △ Less

Submitted 17 July, 2017; v1 submitted 1 May, 2017; originally announced May 2017.

Comments: 10 pages, 5 col. figures, 1 table

Journal ref: MNRAS, Vol. 470, pp. 3664-3671 (2017)

Optimized trajectories to the nearest stars using lightweight high-velocity photon sails

Authors: René Heller, Michael Hippke, Pierre Kervella

Abstract: New means of interstellar travel are now being considered by various research teams, assuming lightweight spaceships to be accelerated via either laser or solar radiation to a significant fraction of the speed of light (c). We recently showed that gravitational assists can be combined with the stellar photon pressure to decelerate an incoming lightsail from Earth and fling it around a star or brin… ▽ More New means of interstellar travel are now being considered by various research teams, assuming lightweight spaceships to be accelerated via either laser or solar radiation to a significant fraction of the speed of light (c). We recently showed that gravitational assists can be combined with the stellar photon pressure to decelerate an incoming lightsail from Earth and fling it around a star or bring it to rest. Here, we demonstrate that photogravitational assists are more effective when the star is used as a bumper (i.e. the sail passes "in front of" the star) rather than as a catapult (i.e. the sail passes "behind" or "around" the star). This increases the maximum deceleration at $α$ Cen A and B and reduces the travel time of a nominal graphene-class sail (mass-to-surface ratio 8.6e-4 gram m$^{-2}$) from 95 to 75 yr. The maximum possible velocity reduction upon arrival depends on the required deflection angle from $α$ Cen A to B and therefore on the binary's orbital phase. Here, we calculate the variation of the minimum travel times from Earth into a bound orbit around Proxima for the next 300 yr and then extend our calculations to roughly 22,000 stars within about 300 ly. Although $α$ Cen is the most nearby star system, we find that Sirius A offers the shortest possible travel times into a bound orbit: 69 yr assuming 12.5% c can be obtained at departure from the solar system. Sirius A thus offers the opportunity of flyby exploration plus deceleration into a bound orbit of the companion white dwarf after relatively short times of interstellar travel. △ Less

Submitted 30 August, 2017; v1 submitted 11 April, 2017; originally announced April 2017.

Comments: 14 pages, 7 figures (5 col, 2 b/w), 2 tables

Journal ref: Astronomical Journal, 2017, 154, 115 (11pp)

An open-source platform to study uniaxial stress effects on nanoscale devices

Authors: G. Signorello, M. Schraff, P. Zellekens, U. Drechsler, M. Buerge, H. R. Steinauer, R. Heller, M. Tschudy, H. Riel

Abstract: We present an automatic measurement platform that enables the characterization of nanodevices by electrical transport and optical spectroscopy as a function of uniaxial stress. We provide insights into and detailed descriptions of the mechanical device, the substrate design and fabrication, and the instrument control software, which is provided under open-source license. The capability of the plat… ▽ More We present an automatic measurement platform that enables the characterization of nanodevices by electrical transport and optical spectroscopy as a function of uniaxial stress. We provide insights into and detailed descriptions of the mechanical device, the substrate design and fabrication, and the instrument control software, which is provided under open-source license. The capability of the platform is demonstrated by characterizing the piezo-resistance of an InAs nanowire device using a combination of electrical transport and Raman spectroscopy. The advantages of this measurement platform are highlighted by comparison with state-of-the-art piezo-resistance measurements in InAs nanowires. We envision that the systematic application of this methodology will provide new insights into the physics of nanoscale devices and novel materials for electronics, and thus contribute to the assessment of the potential of strain as a technology booster for nanoscale electronics. △ Less

Submitted 5 April, 2017; originally announced April 2017.

Comments: 6 figures, 19 pages; Submitted to Review of Scientific Instruments

High precision half-life measurement of $^{147}$Sm $α$ decay from thin-film sources

Authors: Heinrich Wilsenach, Kai Zuber, Detlev Degering, René Heller, Volker Neu

Abstract: An investigation of the α-decay of $^{147}$Sm was performed using an ultra low-background Twin Frisch-Grid Ionisation Chamber (TF-GIC). Four natural samarium samples were produced using pulsed laser deposition in ultra high vacuum. The abundance of the $^{147}$Sm isotope was mea- sured using inductively coupled plasma mass spectrometry. A combined half-life value for 147Sm of… ▽ More An investigation of the α-decay of $^{147}$Sm was performed using an ultra low-background Twin Frisch-Grid Ionisation Chamber (TF-GIC). Four natural samarium samples were produced using pulsed laser deposition in ultra high vacuum. The abundance of the $^{147}$Sm isotope was mea- sured using inductively coupled plasma mass spectrometry. A combined half-life value for 147Sm of $1.079(26)\times{}10^{11}$ years was measured. A search for the α-decay into the first excited state of $^{143}$Nd has been performed using $γ$-spectroscopy, resulting in a lower half-life limit of $T_{1/2} > 3.1 \times{}10^{18}$ years (at 90% C.L.). △ Less

Submitted 21 March, 2017; originally announced March 2017.

The Effect of Multiple Heat Sources on Exomoon Habitable Zones

Authors: Vera Dobos, René Heller, Edwin L. Turner

Abstract: With dozens of Jovian and super-Jovian exoplanets known to orbit their host stars in or near the stellar habitable zones, it has recently been suggested that moons the size of Mars could offer abundant surface habitats beyond the solar system. Several searches for such exomoons are now underway, and the exquisite astronomical data quality of upcoming space missions and ground-based extremely large… ▽ More With dozens of Jovian and super-Jovian exoplanets known to orbit their host stars in or near the stellar habitable zones, it has recently been suggested that moons the size of Mars could offer abundant surface habitats beyond the solar system. Several searches for such exomoons are now underway, and the exquisite astronomical data quality of upcoming space missions and ground-based extremely large telescopes could make the detection and characterization of exomoons possible in the near future. Here we explore the effects of tidal heating on the potential of Mars- to Earth-sized satellites to host liquid surface water, and we compare the tidal heating rates predicted by tidal equilibrium model and a viscoelastic model. In addition to tidal heating, we consider stellar radiation, planetary illumination and thermal heat from the planet. However, the effects of a possible moon atmosphere are neglected. We map the circumplanetary habitable zone for different stellar distances in specific star-planet-satellite configurations, and determine those regions where tidal heating dominates over stellar radiation. We find that the `thermostat effect' of the viscoelastic model is significant not just at large distances from the star, but also in the stellar habitable zone, where stellar radiation is prevalent. We also find that tidal heating of Mars-sized moons with eccentricities between 0.001 and 0.01 is the dominant energy source beyond 3--5 AU from a Sun-like star and beyond 0.4--0.6 AU from an M3 dwarf star. The latter would be easier to detect (if they exist), but their orbital stability might be under jeopardy due to the gravitational perturbations from the star. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Comments: accepted for publication in A&A, 8 pages, 4 figures

Journal ref: A&A 601, A91 (2017)

Deceleration of high-velocity interstellar photon sails into bound orbits at $α$ Centauri

Authors: René Heller, Michael Hippke

Abstract: At a distance of about 4.22 lightyears, it would take about 100,000 years for humans to visit our closest stellar neighbor Proxima Centauri using modern chemical thrusters. New technologies are now being developed that involve high-power lasers firing at 1 gram solar sails in near-Earth orbits, accelerating them to 20% the speed of light (c) within minutes. Although such an interstellar probe coul… ▽ More At a distance of about 4.22 lightyears, it would take about 100,000 years for humans to visit our closest stellar neighbor Proxima Centauri using modern chemical thrusters. New technologies are now being developed that involve high-power lasers firing at 1 gram solar sails in near-Earth orbits, accelerating them to 20% the speed of light (c) within minutes. Although such an interstellar probe could reach Proxima 20 years after launch, without propellant to slow it down it would traverse the system within hours. Here we demonstrate how the stellar photon pressures of the stellar triple $α$ Cen A, B, and C (Proxima) can be used together with gravity assists to decelerate incoming solar sails from Earth. The maximum injection speed at $α$ Cen A to park a sail with a mass-to-surface ratio ($σ$) similar to graphene (7.6e-4 gram/m$^{-2}$) in orbit around Proxima is about 13,800 km/s (4.6% c), implying travel times from Earth to $α$ Cen A and B of about 95 years and another 46 years (with a residual velocity of 1280 km/s) to Proxima. The size of such a low-$σ$ sail required to carry a payload of 10 grams is about 10$^5$ m$^2$ = (316 m)$^2$. Such a sail could use solar photons instead of an expensive laser system to gain interstellar velocities at departure. Photogravitational assists allow visits of three stellar systems and an Earth-sized potentially habitable planet in one shot, promising extremely high scientific yields. △ Less

Submitted 30 January, 2017; originally announced January 2017.

Comments: 9 pages, 5 figures (4 colored)

Journal ref: ApJ Letters, 2017, Volume 835, L32

On the Detection of Extrasolar Moons and Rings

Authors: René Heller

Abstract: Since the discovery of a planet transiting its host star in the year 2000, thousands of additional exoplanets and exoplanet candidates have been detected, mostly by NASA's Kepler space telescope. Some of them are almost as small as the Earth's moon. As the solar system is teeming with moons, more than a hundred of which are in orbit around the eight local planets, and with all of the local giant p… ▽ More Since the discovery of a planet transiting its host star in the year 2000, thousands of additional exoplanets and exoplanet candidates have been detected, mostly by NASA's Kepler space telescope. Some of them are almost as small as the Earth's moon. As the solar system is teeming with moons, more than a hundred of which are in orbit around the eight local planets, and with all of the local giant planets showing complex ring systems, astronomers have naturally started to search for moons and rings around exoplanets in the past few years. We here discuss the principles of the observational methods that have been proposed to find moons and rings beyond the solar system and we review the first searches. Though no exomoon or exoring has been unequivocally validated so far, theoretical and technological requirements are now on the verge of being mature for such discoveries. △ Less

Submitted 3 August, 2017; v1 submitted 17 January, 2017; originally announced January 2017.

Comments: invited review, 17 pages, 4 figures (3 col, 1 b/w)

The IceCube Neutrino Observatory: Instrumentation and Online Systems

Authors: IceCube Collaboration, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Argüelles, R. Auer, J. Auffenberg, S. Axani, J. Baccus, X. Bai, S. Barnet, S. W. Barwick, V. Baum, R. Bay, K. Beattie, J. J. Beatty , et al. (328 additional authors not shown)

Abstract: The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable sy… ▽ More The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade. △ Less

Submitted 6 February, 2024; v1 submitted 15 December, 2016; originally announced December 2016.

Comments: 82 pages, 50 figures; fix minor error in eq. 3.9 (time calibration cable delay)

Journal ref: JINST 12 P03012 (2017)

Analysis of the X-ray spectrum of the hot bubble of BD+30°3639

Authors: Detlef Schönberner, Ralf Jacob, René Heller, Matthias Steffen

Abstract: We developed a model for wind-blown bubbles with temperature and density profiles based on self-similar solutions including thermal conduction. We constructed also heat-conduction bubbles with chemical discontinuities. The X-ray emission is computed using the well-documented CHIANTI code (v6.0.1). These bubble models are used to (re)analyse the high-resolution X-ray spectrum of the hot bubble of B… ▽ More We developed a model for wind-blown bubbles with temperature and density profiles based on self-similar solutions including thermal conduction. We constructed also heat-conduction bubbles with chemical discontinuities. The X-ray emission is computed using the well-documented CHIANTI code (v6.0.1). These bubble models are used to (re)analyse the high-resolution X-ray spectrum of the hot bubble of BD+30°3639, and they appeared to be much superior to constant temperature approaches. We found for the X-ray emission of BD+30°3639 that temperature-sensitive and abundance-sensitive line ratios computed on the basis of heat-conducting wind-blown bubbles and with abundances as found in the stellar photosphere/wind can only be reconciled with the observations if the hot bubble of BD+30°3639 is chemically stratified, i.e. if it contains also a small mass fraction ($\simeq$ 3 %) of hydrogen-rich matter immediately behind the conduction front. Neon appears to be strongly enriched, with a mass fraction of at least about 0.06. △ Less

Submitted 25 January, 2017; v1 submitted 5 December, 2016; originally announced December 2016.

Comments: 4 pages, 4 figures (b/w), submitted to Proceedings IAU Symposium No. 323, 2016, paper revision includes feedback from the editor

Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)

Authors: The CTA Consortium, :, A. Abchiche, U. Abeysekara, Ó. Abril, F. Acero, B. S. Acharya, C. Adams, G. Agnetta, F. Aharonian, A. Akhperjanian, A. Albert, M. Alcubierre, J. Alfaro, R. Alfaro, A. J. Allafort, R. Aloisio, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio, J. Anderson, M. Anduze, E. O. Angüner , et al. (1387 additional authors not shown)

Abstract: List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: Index of CTA conference proceedings for the Gamma 2016, Heidelberg, Germany

How eclipse time variations, eclipse duration variations, and radial velocities can reveal S-type planets in close eclipsing binaries

Authors: M. Oshagh, R. Heller, S. Dreizler

Abstract: While about a dozen transiting planets have been found in wide orbits around an inner, close stellar binary (so-called "P-type planets"), no planet has yet been detected orbiting only one star (a so-called "S-type planet") in an eclipsing binary. This is despite a large number of eclipsing binary systems discovered with the Kepler telescope. Here we propose a new detection method for these S-type… ▽ More While about a dozen transiting planets have been found in wide orbits around an inner, close stellar binary (so-called "P-type planets"), no planet has yet been detected orbiting only one star (a so-called "S-type planet") in an eclipsing binary. This is despite a large number of eclipsing binary systems discovered with the Kepler telescope. Here we propose a new detection method for these S-type planets, which uses a correlation between the stellar radial velocities (RVs), eclipse timing variations (ETVs), and eclipse duration variations (EDVs). We test the capability of this technique by simulating a realistic benchmark system and demonstrate its detectability with existing high-accuracy RV and photometry instruments. We illustrate that, with a small number of RV observations, the RV-ETV diagrams allows us to distinguish between prograde and retrograde planetary orbits and also the planetary mass can be estimated if the stellar cross-correlation functions can be disentangled. We also identify a new (though minimal) contribution of S-type planets to the Rossiter-McLaughlin effect in eclipsing stellar binaries. We finally explore possible detection of exomoons around transiting luminous giant planets and find that the precision required to detect moons in the RV curves of their host planets is of the order of ${\rm cm\,s}^{-1}$ and therefore not accessible with current instruments. △ Less

Submitted 19 December, 2016; v1 submitted 13 October, 2016; originally announced October 2016.

Comments: 9 pages, 9 Figures, accepted for publication in MNRAS (16/12/2016)

Computing the Bergsma Dassios sign-covariance

Authors: Yair Heller, Ruth Heller

Abstract: Bergsma and Dassios (2014) introduced an independence measure which is zero if and only if two random variables are independent. This measure can be naively calculated in $O(n^4)$. Weihs et al. (2015) showed that it can be calculated in $O(n^2 \log n)$. In this note we will show that using the methods described in Heller et al. (2016), the measure can easily be calculated in only $O(n^2)$. Bergsma and Dassios (2014) introduced an independence measure which is zero if and only if two random variables are independent. This measure can be naively calculated in $O(n^4)$. Weihs et al. (2015) showed that it can be calculated in $O(n^2 \log n)$. In this note we will show that using the methods described in Heller et al. (2016), the measure can easily be calculated in only $O(n^2)$. △ Less

Submitted 27 May, 2016; originally announced May 2016.

Predictable patterns in planetary transit timing variations and transit duration variations due to exomoons

Authors: René Heller, Michael Hippke, Ben Placek, Daniel Angerhausen, Eric Agol

Abstract: We present new ways to identify single and multiple moons around extrasolar planets using planetary transit timing variations (TTVs) and transit duration variations (TDVs). For planets with one moon, measurements from successive transits exhibit a hitherto undescribed pattern in the TTV-TDV diagram, originating from the stroboscopic sampling of the planet's orbit around the planet-moon barycenter.… ▽ More We present new ways to identify single and multiple moons around extrasolar planets using planetary transit timing variations (TTVs) and transit duration variations (TDVs). For planets with one moon, measurements from successive transits exhibit a hitherto undescribed pattern in the TTV-TDV diagram, originating from the stroboscopic sampling of the planet's orbit around the planet-moon barycenter. This pattern is fully determined and analytically predictable after three consecutive transits. The more measurements become available, the more the TTV-TDV diagram approaches an ellipse. For planets with multiple moons in orbital mean motion resonance (MMR), like the Galilean moons, the pattern is much more complex and addressed numerically in this report. Exomoons in MMR can also form closed, predictable TTV-TDV figures if the drift of the moons' pericenters is sufficiently slow. We find that MMR exomoons produce loops in the TTV-TDV diagram and that the number of these loops is equal to the order of the MMR, or the largest integer in the MMR ratio. We use a Bayesian model and Monte Carlo simulations to test the discoverability of exomoons using TTV-TDV diagrams with current and near-future technology. In a blind test, two of us (BP, DA) successfully retrieved a large moon from simulated TTV-TDV by co-authors MH and RH, which resembled data from a known Kepler planet candidate. Single exomoons with a 10% moon-to-planet mass ratio, like to Pluto-Charon binary, can be detectable in the archival data of the Kepler primary mission. Multi-exomoon systems, however, require either larger telescopes or brighter target stars. Complementary detection methods invoking a moon's own photometric transit or its orbital sampling effect can be used for validation or falsification. A combination of TESS, CHEOPS, and PLATO data would offer a compelling opportunity for exomoon discoveries around bright stars. △ Less

Submitted 20 June, 2016; v1 submitted 18 April, 2016; originally announced April 2016.

Comments: published in A&A, text updated to journal version, note added in proofs, 10 Figs. in main text (5 col, 5 b/w), 4 Figs. in appendix (b/w), TTV-TDV simulator available at https://github.com/hippke/TTV-TDV-exomoons

Journal ref: A&A, 2016, Vol. 591, A67, 16 pp

Modeling the Orbital Sampling Effect of Extrasolar Moons

Authors: René Heller, Michael Hippke, Brian Jackson

Abstract: The orbital sampling effect (OSE) appears in phase-folded transit light curves of extrasolar planets with moons. Analytical OSE models have hitherto neglected stellar limb darkening and non-zero transit impact parameters and assumed that the moon is on a circular, co-planar orbit around the planet. Here, we present an analytical OSE model for eccentric moon orbits, which we implement in a numerica… ▽ More The orbital sampling effect (OSE) appears in phase-folded transit light curves of extrasolar planets with moons. Analytical OSE models have hitherto neglected stellar limb darkening and non-zero transit impact parameters and assumed that the moon is on a circular, co-planar orbit around the planet. Here, we present an analytical OSE model for eccentric moon orbits, which we implement in a numerical simulator with stellar limb darkening that allows for arbitrary transit impact parameters. We also describe and publicly release a fully numerical OSE simulator (PyOSE) that can model arbitrary inclinations of the transiting moon orbit. Both our analytical solution for the OSE and PyOSE can be used to search for exomoons in long-term stellar light curves such as those by Kepler and the upcoming PLATO mission. Our updated OSE model offers an independent method for the verification of possible future exomoon claims via transit timing variations and transit duration variations. Photometrically quiet K and M dwarf stars are particularly promising targets for an exomoon discovery using the OSE. △ Less

Submitted 23 March, 2016; originally announced March 2016.

Comments: published in ApJ; 11 figures (8 b/w, 3 col); OSE simulator available at https://github.com/hippke/pyose

Journal ref: The Astrophysical Journal (2016) 820, 88

Multivariate tests of association based on univariate tests

Authors: Ruth Heller, Yair Heller

Abstract: For testing two random vectors for independence, we consider testing whether the distance of one vector from a center point is independent from the distance of the other vector from a center point by a univariate test. In this paper we provide conditions under which it is enough to have a consistent univariate test of independence on the distances to guarantee that the power to detect dependence b… ▽ More For testing two random vectors for independence, we consider testing whether the distance of one vector from a center point is independent from the distance of the other vector from a center point by a univariate test. In this paper we provide conditions under which it is enough to have a consistent univariate test of independence on the distances to guarantee that the power to detect dependence between the random vectors increases to one, as the sample size increases. These conditions turn out to be minimal. If the univariate test is distribution-free, the multivariate test will also be distribution-free. If we consider multiple center points and aggregate the center-specific univariate tests, the power may be further improved, and the resulting multivariate test may be distribution-free for specific aggregation methods (if the univariate test is distribution-free). We show that several multivariate tests recently proposed in the literature can be viewed as instances of this general approach. △ Less

Submitted 10 March, 2016; originally announced March 2016.

The Search for Extraterrestrial Intelligence in Earth's Solar Transit Zone

Authors: René Heller, Ralph E. Pudritz

Abstract: Over the past few years, astronomers have detected thousands of planets and candidate planets by observing their periodic transits in front of their host stars. Related methods might soon allow studies of the chemical imprints of life in extrasolar planetary atmospheres. Here, we address the reciprocal question, namely, from where is Earth detectable by extrasolar observers using similar methods.… ▽ More Over the past few years, astronomers have detected thousands of planets and candidate planets by observing their periodic transits in front of their host stars. Related methods might soon allow studies of the chemical imprints of life in extrasolar planetary atmospheres. Here, we address the reciprocal question, namely, from where is Earth detectable by extrasolar observers using similar methods. We explore Earth's transit zone (ETZ), the projection of a band around Earth's ecliptic onto the celestial plane, where observers can detect Earth transits across the Sun. The ETZ is between $0.520^\circ$ and $0.537^\circ$ wide due to the non-circular Earth orbit. The restricted ETZ (rETZ), where Earth transits the Sun less than 0.5 solar radii from its center, is ~$0.262^\circ$ wide. We first compile a target list of 45 K and 37 G dwarf stars inside the rETZ and within 1 kiloparsec (3260 lightyears) using the Hipparcos catalog. We then greatly enlarge the number of potential targets by constructing an analytic galactic disk model and find that ~$10^5$ K and G dwarf stars should reside within the rETZ. The ongoing GAIA space mission can potentially discover all G dwarfs among them (several $10^4$) within the next five years. Many more potentially habitable planets orbit dim, unknown M stars in the ETZ and other stars that traversed the ETZ long time ago. If any of these planets host intelligent observers, they could have identified Earth as a habitable, or even as a living, world, and we could be receiving their broadcasts today. The K2 mission, the Allen Telescope Array, the upcoming Square Kilometer Array, or the Green Bank Telescope might detect such deliberate extraterrestrial messages. Ultimately, the ETZ would be an ideal region to monitor by the Breakthrough Listen Initiatives, an upcoming survey that will constitute the most comprehensive search for extraterrestrial intelligence so far. △ Less

Submitted 18 April, 2016; v1 submitted 29 February, 2016; originally announced March 2016.

Comments: Astrobiology cover story (2016/4), 3 colored figures, 1 Table, language synchronized with version published in Astrobiology

Transits of extrasolar moons around luminous giant planets

Authors: René Heller

Abstract: Beyond Earth-like planets, moons can be habitable, too. No exomoons have been securely detected, but they could be extremely abundant. Young Jovian planets can be as hot as late M stars, with effective temperatures of up to 2000 K. Transits of their moons might be detectable in their infrared photometric light curves if the planets are sufficiently separated ($\gtrsim10$ AU) from the stars to be d… ▽ More Beyond Earth-like planets, moons can be habitable, too. No exomoons have been securely detected, but they could be extremely abundant. Young Jovian planets can be as hot as late M stars, with effective temperatures of up to 2000 K. Transits of their moons might be detectable in their infrared photometric light curves if the planets are sufficiently separated ($\gtrsim10$ AU) from the stars to be directly imaged. The moons will be heated by radiation from their young planets and potentially by tidal friction. Although stellar illumination will be weak beyond 5 AU, these alternative energy sources could liquify surface water on exomoons for hundreds of Myr. A Mars-mass H$_2$O-rich moon around $β$ Pic b would have a transit depth of $1.5\times10^{-3}$, in reach of near-future technology. △ Less

Submitted 1 March, 2016; originally announced March 2016.

Comments: 2 colored figures, 4 pages, in press at A&A (http://dx.doi.org/10.1051/0004-6361/201527496)

Journal ref: A&A 588, A34 (2016)

Precise tuning of the Curie temperature of (Ga,Mn)As-based magnetic semiconductors by hole compensation: Support for valence-band ferromagnetism

Authors: Shengqiang Zhou, Lin Li, Ye Yuan, A. W. Rushforth, Lin Chen, Yutian Wang, R. Böttger, R. Heller, Jianhua Zhao, K. W. Edmonds, R. P. Campion, B. L. Gallagher, C. Timm, M. Helm

Abstract: For the prototype diluted ferromagnetic semiconductor (Ga,Mn)As, there is a fundamental concern about the electronic states near the Fermi level, i.e., whether the Fermi level resides in a well-separated impurity band derived from Mn do** (impurity-band model) or in the valence band that is already merged with the Mn-derived impurity band (valence-band model). We investigate this question by car… ▽ More For the prototype diluted ferromagnetic semiconductor (Ga,Mn)As, there is a fundamental concern about the electronic states near the Fermi level, i.e., whether the Fermi level resides in a well-separated impurity band derived from Mn do** (impurity-band model) or in the valence band that is already merged with the Mn-derived impurity band (valence-band model). We investigate this question by carefully shifting the Fermi level by means of carrier compensation. We use helium-ion implantation, a standard industry technology, to precisely compensate the hole do** of GaAs-based diluted ferromagnetic semiconductors while kee** the Mn concentration constant. We monitor the change of Curie temperature ($T_C$) and conductivity. For a broad range of samples including (Ga,Mn)As and (Ga,Mn)(As,P) with various Mn and P concentrations, we observe a smooth decrease of $T_C$ with carrier compensation over a wide temperature range while the conduction is changed from metallic to insulating. The existence of $T_C$ below 10\,K is also confirmed in heavily compensated samples. Our experimental results are naturally explained within the valence-band picture. △ Less

Submitted 15 August, 2016; v1 submitted 22 February, 2016; originally announced February 2016.

Comments: 14 pages, 10 figures

Journal ref: Phys. Rev. B 94, 075205 (2016)

Nanometer scale elemental analysis in the helium ion microscope using time of flight spectrometry

Authors: Nico Klingner, René Heller, Gregor Hlawacek, Johannes von Borany, John Notte, Jason Huang, Stefan Facsko

Abstract: Time of flight backscattering spectrometry (ToF-BS) was successfully implemented in a helium ion microscope (HIM). Its integration introduces the ability to perform laterally resolved elemental analysis as well as elemental depth profiling on the nm scale. A lateral resolution of $\leq$ 54 nm and a time resolution of $Δt \leq$ 17 ns $(Δt/t \leq 5.4\%)$ are achieved. By using the energy of the back… ▽ More Time of flight backscattering spectrometry (ToF-BS) was successfully implemented in a helium ion microscope (HIM). Its integration introduces the ability to perform laterally resolved elemental analysis as well as elemental depth profiling on the nm scale. A lateral resolution of $\leq$ 54 nm and a time resolution of $Δt \leq$ 17 ns $(Δt/t \leq 5.4\%)$ are achieved. By using the energy of the backscattered particles for contrast generation, we introduce a new imaging method to the HIM allowing direct elemental map** as well as local spectrometry. In addition laterally resolved time of flight secondary ion mass spectrometry (ToF-SIMS) can be performed with the same setup. Time of flight is implemented by pulsing the primary ion beam. This is achieved in a cost effective and minimal invasive way that does not influence the high resolution capabilities of the microscope when operating in standard secondary electron (SE) imaging mode. This technique can thus be easily adapted to existing devices. The particular implementation of ToF-BS and ToF-SIMS techniques are described, results are presented and advantages, difficulties and limitations of this new techniques are discussed. △ Less

Submitted 30 November, 2015; v1 submitted 15 October, 2015; originally announced October 2015.