Showing 1–50 of 148 results for author: Heller, R

Structural changes in Ge1-xSnx and Si1-x-yGeySnx thin films on SOI substrates treated by pulse laser annealing

Authors: Oliver Steuer, Daniel Schwarz, Michael Oehme, Florian Bärwolf, Yu Cheng, Fabian Ganss, René Hübner, René Heller, Shengqiang Zhou, Manfred Helm, Gianaurelio Cuniberti, Yordan M. Georgiev, Slawomir Prucnal

Abstract: Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the CMOS technology. Unfortunately, the equilibrium solid solubility of Sn in Si1-xGex is less than 1% and the pseud… ▽ More Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the CMOS technology. Unfortunately, the equilibrium solid solubility of Sn in Si1-xGex is less than 1% and the pseudomorphic growth of Si1-x-yGeySnx on Ge or Si can cause in-plane compressive strain in the grown layer, degrading the superior properties of these alloys. Therefore, post-growth strain engineering by ultrafast non-equilibrium thermal treatments like pulse laser annealing (PLA) is needed to improve the layer quality. In this article, Ge0.94Sn0.06 and Si0.14Ge0.8Sn0.06 thin films grown on silicon-on-insulator substrates by molecular beam epitaxy were post growth thermally treated by PLA. The material is analyzed before and after the thermal treatments by transmission electron microscopy, X-ray diffraction (XRD), Rutherford backscattering spectrometry, secondary ion mass spectrometry, and Hall effect measurements. It is shown that after annealing, the material is single-crystalline with improved crystallinity than the as-grown layer. This is reflected in a significantly increased XRD reflection intensity, well-ordered atomic pillars, and increased active carrier concentrations up to 4x1019 cm-3. △ Less

Submitted 13 June, 2024; originally announced June 2024.

The PLATO Mission

Authors: Heike Rauer, Conny Aerts, Juan Cabrera, Magali Deleuil, Anders Erikson, Laurent Gizon, Mariejo Goupil, Ana Heras, Jose Lorenzo-Alvarez, Filippo Marliani, Cesar Martin-Garcia, J. Miguel Mas-Hesse, Laurence O'Rourke, Hugh Osborn, Isabella Pagano, Giampaolo Piotto, Don Pollacco, Roberto Ragazzoni, Gavin Ramsay, Stéphane Udry, Thierry Appourchaux, Willy Benz, Alexis Brandeker, Manuel Güdel, Eduardo Janot-Pacheco , et al. (801 additional authors not shown)

Abstract: PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati… ▽ More PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases. △ Less

Submitted 8 June, 2024; originally announced June 2024.

The TEMPO Survey II: Science Cases Leveraged from a Proposed 30-Day Time Domain Survey of the Orion Nebula with the Nancy Grace Roman Space Telescope

Authors: Melinda Soares-Furtado, Mary Anne Limbach, Andrew Vanderburg, John Bally, Juliette Becker, Anna L. Rosen, Luke G. Bouma, Johanna M. Vos, Steve B. Howell, Thomas G. Beatty, William M. J. Best, Anne Marie Cody, Adam Distler, Elena D'Onghia, René Heller, Brandon S. Hensley, Natalie R. Hinkel, Brian Jackson, Marina Kounkel, Adam Kraus, Andrew W. Mann, Nicholas T. Marston, Massimo Robberto, Joseph E. Rodriguez, Jason H. Steffen , et al. (4 additional authors not shown)

Abstract: The TEMPO (Transiting Exosatellites, Moons, and Planets in Orion) Survey is a proposed 30-day observational campaign using the Nancy Grace Roman Space Telescope. By providing deep, high-resolution, short-cadence infrared photometry of a dynamic star-forming region, TEMPO will investigate the demographics of exosatellites orbiting free-floating planets and brown dwarfs -- a largely unexplored disco… ▽ More The TEMPO (Transiting Exosatellites, Moons, and Planets in Orion) Survey is a proposed 30-day observational campaign using the Nancy Grace Roman Space Telescope. By providing deep, high-resolution, short-cadence infrared photometry of a dynamic star-forming region, TEMPO will investigate the demographics of exosatellites orbiting free-floating planets and brown dwarfs -- a largely unexplored discovery space. Here, we present the simulated detection yields of three populations: extrasolar moon analogs orbiting free-floating planets, exosatellites orbiting brown dwarfs, and exoplanets orbiting young stars. Additionally, we outline a comprehensive range of anticipated scientific outcomes accompanying such a survey. These science drivers include: obtaining observational constraints to test prevailing theories of moon, planet, and star formation; directly detecting widely separated exoplanets orbiting young stars; investigating the variability of young stars and brown dwarfs; constraining the low-mass end of the stellar initial mass function; constructing the distribution of dust in the Orion Nebula and map** evolution in the near-infrared extinction law; map** emission features that trace the shocked gas in the region; constructing a dynamical map of Orion members using proper motions; and searching for extragalactic sources and transients via deep extragalactic observations reaching a limiting magnitude of $m_{AB}=29.7$\,mag (F146 filter). △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 15 pages, 6 figures, submitted to OJAp

Observation of Significant Photosynthesis in Garden Cress and Cyanobacteria under Simulated Illumination from a K Dwarf Star

Authors: Iva Vilović, Dirk Schulze-Makuch, René Heller

Abstract: Stars with about 45 to 80% the mass of the Sun, so-called K dwarf stars, have previously been proposed as optimal host stars in the search for habitable extrasolar worlds. These stars are abundant, have stable luminosities over billions of years longer than Sun-like stars, and offer favorable space environmental conditions. So far, the theoretical and experimental focus on exoplanet habitability h… ▽ More Stars with about 45 to 80% the mass of the Sun, so-called K dwarf stars, have previously been proposed as optimal host stars in the search for habitable extrasolar worlds. These stars are abundant, have stable luminosities over billions of years longer than Sun-like stars, and offer favorable space environmental conditions. So far, the theoretical and experimental focus on exoplanet habitability has been on even less massive, though potentially less hospitable red dwarf stars. Here we present the first experimental data on the responses of photosynthetic organisms to a simulated K dwarf spectrum. We find that garden cress Lepidium sativum under K-dwarf radiation exhibits comparable growth and photosynthetic efficiency as under solar illumination on Earth. The cyanobacterium Chroococcidiopsis sp. CCMEE 029 exhibits significantly higher photosynthetic efficiency and culture growth under K dwarf radiation compared to solar conditions. Our findings of the affirmative responses of these two photosynthetic organisms to K dwarf radiation suggest that exoplanets in the habitable zones around such stars deserve high priority in the search for extrasolar life. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Exomoons & Exorings with the Habitable Worlds Observatory I: On the Detection of Earth-Moon Analog Shadows & Eclipses

Authors: Mary Anne Limbach, Jacob Lustig-Yaeger, Andrew Vanderburg, Johanna M. Vos, Rene Heller, Tyler D. Robinson

Abstract: The highest priority recommendation of the Astro2020 Decadal Survey for space-based astronomy was the construction of an observatory capable of characterizing habitable worlds. In this paper series we explore the detectability of and interference from exomoons and exorings serendipitously observed with the proposed Habitable Worlds Observatory (HWO) as it seeks to characterize exoplanets, starting… ▽ More The highest priority recommendation of the Astro2020 Decadal Survey for space-based astronomy was the construction of an observatory capable of characterizing habitable worlds. In this paper series we explore the detectability of and interference from exomoons and exorings serendipitously observed with the proposed Habitable Worlds Observatory (HWO) as it seeks to characterize exoplanets, starting in this manuscript with Earth-Moon analog mutual events. Unlike transits, which only occur in systems viewed near edge-on, shadow (i.e., solar eclipse) and lunar eclipse mutual events occur in almost every star-planet-moon system. The cadence of these events can vary widely from ~yearly to multiple events per day, as was the case in our younger Earth-Moon system. Leveraging previous space-based (EPOXI) lightcurves of a Moon transit and performance predictions from the LUVOIR-B concept, we derive the detectability of Moon analogs with HWO. We determine that Earth-Moon analogs are detectable with observation of ~2-20 mutual events for systems within 10pc, and larger moons should remain detectable out to 20pc. We explore the extent to which exomoon mutual events can mimic planet features and weather. We find that HWO wavelength coverage in the near-IR, specifically in the 1.4 micron water band where large moons can outshine their host planet, will aid in differentiating exomoon signals from exoplanet variability. Finally, we predict that exomoons formed through collision processes akin to our Moon are more likely to be detected in younger systems, where shorter orbital periods and favorable geometry enhance the probability and frequency of mutual events. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Comments: 16 pages, 11 figures, in review at AJ, includes revisions from first round of review, comments welcome

Direction Preferring Confidence Intervals

Authors: Tzviel Frostig, Yoav Benjamini, Ruth Heller

Abstract: Confidence intervals (CIs) are instrumental in statistical analysis, providing a range estimate of the parameters. In modern statistics, selective inference is common, where only certain parameters are highlighted. However, this selective approach can bias the inference, leading some to advocate for the use of CIs over p-values. To increase the flexibility of confidence intervals, we introduce dir… ▽ More Confidence intervals (CIs) are instrumental in statistical analysis, providing a range estimate of the parameters. In modern statistics, selective inference is common, where only certain parameters are highlighted. However, this selective approach can bias the inference, leading some to advocate for the use of CIs over p-values. To increase the flexibility of confidence intervals, we introduce direction-preferring CIs, enabling analysts to focus on parameters trending in a particular direction. We present these types of CIs in two settings: First, when there is no selection of parameters; and second, for situations involving parameter selection, where we offer a conditional version of the direction-preferring CIs. Both of these methods build upon the foundations of Modified Pratt CIs, which rely on non-equivariant acceptance regions to achieve longer intervals in exchange for improved sign exclusions. We show that for selected parameters out of m > 1 initial parameters of interest, CIs aimed at controlling the false coverage rate, have higher power to determine the sign compared to conditional CIs. We also show that conditional confidence intervals control the marginal false coverage rate (mFCR) under any dependency. △ Less

Submitted 30 March, 2024; originally announced April 2024.

Comments: 11 figures, 45 pages

MSC Class: 62P10

Evaluation of transition rates from nonequilibrium instantons

Authors: Eric R. Heller, David T. Limmer

Abstract: Equilibrium rate theories play a crucial role in understanding rare, reactive events. However, they are inapplicable to a range of irreversible processes in systems driven far from thermodynamic equilibrium like active and biological matter. Here, we develop a general, computationally efficient nonequilibrium rate theory in the weak-noise limit based on an instanton approximation to the stochastic… ▽ More Equilibrium rate theories play a crucial role in understanding rare, reactive events. However, they are inapplicable to a range of irreversible processes in systems driven far from thermodynamic equilibrium like active and biological matter. Here, we develop a general, computationally efficient nonequilibrium rate theory in the weak-noise limit based on an instanton approximation to the stochastic path integral and illustrate its wide range of application in the study of rare nonequilibrium events. We demonstrate excellent agreement of the instanton rates with numerically exact results for a particle under a non-conservative force. We also study phase transitions in an active field theory. We elucidate how activity alters the stability of the two phases and their rates of interconversion in a manner that can be well-described by modifying classical nucleation theory △ Less

Submitted 27 March, 2024; originally announced March 2024.

Comments: 6 pages, 3 figures, Supplementary material available

Selecting informative conformal prediction sets with false coverage rate control

Authors: Ulysse Gazin, Ruth Heller, Ariane Marandon, Etienne Roquain

Abstract: In supervised learning, including regression and classification, conformal methods provide prediction sets for the outcome/label with finite sample coverage for any machine learning predictor. We consider here the case where such prediction sets come after a selection process. The selection process requires that the selected prediction sets be `informative' in a well defined sense. We consider bot… ▽ More In supervised learning, including regression and classification, conformal methods provide prediction sets for the outcome/label with finite sample coverage for any machine learning predictor. We consider here the case where such prediction sets come after a selection process. The selection process requires that the selected prediction sets be `informative' in a well defined sense. We consider both the classification and regression settings where the analyst may consider as informative only the sample with prediction sets small enough, excluding null values, or obeying other appropriate `monotone' constraints. We develop a unified framework for building such informative conformal prediction sets while controlling the false coverage rate (FCR) on the selected sample. While conformal prediction sets after selection have been the focus of much recent literature in the field, the new introduced procedures, called InfoSP and InfoSCOP, are to our knowledge the first ones providing FCR control for informative prediction sets. We show the usefulness of our resulting procedures on real and simulated data. △ Less

Submitted 9 April, 2024; v1 submitted 18 March, 2024; originally announced March 2024.

Comments: 50 pages, 14 figures

Large Exomoons unlikely around Kepler-1625 b and Kepler-1708 b

Authors: René Heller, Michael Hippke

Abstract: There are more than 200 moons in our Solar System, but their relatively small radii make similarly sized extrasolar moons very hard to detect with current instruments. The best exomoon candidates so far are two nearly Neptune-sized bodies orbiting the Jupiter-sized transiting exoplanets Kepler-1625 b and Kepler-1708 b, but their existence has been contested. Here we reanalyse the Hubble and Kepler… ▽ More There are more than 200 moons in our Solar System, but their relatively small radii make similarly sized extrasolar moons very hard to detect with current instruments. The best exomoon candidates so far are two nearly Neptune-sized bodies orbiting the Jupiter-sized transiting exoplanets Kepler-1625 b and Kepler-1708 b, but their existence has been contested. Here we reanalyse the Hubble and Kepler data used to identify the two exomoon candidates employing nested sampling and Bayesian inference techniques coupled with a fully automated photodynamical transit model. We find that the evidence for the Kepler-1625 b exomoon candidate comes almost entirely from the shallowness of one transit observed with Hubble. We interpret this as a fitting artifact in which a moon transit is used to compensate for the unconstrained stellar limb darkening. We also find much lower statistical evidence for the exomoon candidate around Kepler-1708 b than previously reported. We suggest that visual evidence of the claimed exomoon transits is corrupted by stellar activity in the Kepler light curve. Our injection-retrieval experiments of simulated transits in the original Kepler data reveal false positive rates of 10.9% and 1.6% for Kepler-1625 b and Kepler-1708 b, respectively. Moreover, genuine transit signals of large exomoons would tend to exhibit much higher Bayesian evidence than these two claims. We conclude that neither Kepler-1625 b nor Kepler-1708 b are likely to be orbited by a large exomoon. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: published in Nature Astronomy, 46 pages, 4 Figures (in color), 10 Supplementary Figures (3 in color, 7 in black/white), 5 Supplementary Tables

Evolution of the surface atomic structure of multielement oxide films: curse or blessing?

Authors: Giada Franceschi, Renè Heller, Michael Schmid, Ulrike Diebold, Michele Riva

Abstract: Atomically resolved scanning tunneling microscopy (STM) and x-ray photoelectron spectroscopy (XPS) are used to gain atomic-scale insights into the heteroepitaxy of lanthanum-strontium manganite (LSMO, La$_{1-x}$Sr$_x$MnO$_{3-δ}$, $x$ $\approx$ 0.2) on SrTiO$_3$(110). LSMO is a perovskite oxide characterized by several composition-dependent surface reconstructions. The flexibility of the surface al… ▽ More Atomically resolved scanning tunneling microscopy (STM) and x-ray photoelectron spectroscopy (XPS) are used to gain atomic-scale insights into the heteroepitaxy of lanthanum-strontium manganite (LSMO, La$_{1-x}$Sr$_x$MnO$_{3-δ}$, $x$ $\approx$ 0.2) on SrTiO$_3$(110). LSMO is a perovskite oxide characterized by several composition-dependent surface reconstructions. The flexibility of the surface allows it to incorporate nonstoichiometries during growth, which result in composition-dependent surface atomic structures. This happens up to a critical point, where phase separation occurs, clusters rich in the excess cations form at the surface, and films show a rough morphology. To limit the nonstoichiometry introduced by non-optimal growth conditions, it proves useful to monitor the changes in surface atomic structures as a function of the PLD parameters and tune the latter accordingly. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 8 pages, 5 figures

PlatoSim: An end-to-end PLATO camera simulator for modelling high-precision space-based photometry

Authors: N. Jannsen, J. De Ridder, D. Seynaeve, S. Regibo, R. Huygen, P. Royer, C. Paproth, D. Grießbach, R. Samadi, D. R. Reese, M. Pertenais, E. Grolleau, R. Heller, S. M. Niemi, J. Cabrera, A. Börner, S. Aigrain, J. McCormac, P. Verhoeve, P. Astier, N. Kutrowski, B. Vandenbussche, A. Tkachenko, C. Aerts

Abstract: PLAnetary Transits and Oscillations of stars (PLATO) is the ESA M3 space mission dedicated to detect and characterise transiting exoplanets including information from the asteroseismic properties of their stellar hosts. The uninterrupted and high-precision photometry provided by space-borne instruments such as PLATO require long preparatory phases. An exhaustive list of tests are paramount to desi… ▽ More PLAnetary Transits and Oscillations of stars (PLATO) is the ESA M3 space mission dedicated to detect and characterise transiting exoplanets including information from the asteroseismic properties of their stellar hosts. The uninterrupted and high-precision photometry provided by space-borne instruments such as PLATO require long preparatory phases. An exhaustive list of tests are paramount to design a mission that meets the performance requirements, and as such, simulations are an indispensable tool in the mission preparation. To accommodate PLATO's need of versatile simulations prior to mission launch - that at the same time describe accurately the innovative but complex multi-telescope design - we here present the end-to-end PLATO simulator specifically developed for the purpose, namely PlatoSim. We show step-by-step the algorithms embedded into the software architecture of PlatoSim that allow the user to simulate photometric time series of CCD images and light curves in accordance to the expected observations of PLATO. In the context of the PLATO payload, a general formalism of modelling, end-to-end, incoming photons from the sky to the final measurement in digital units is discussed. We show the strong predictive power of PlatoSim through its diverse applicability and contribution to numerous working groups within the PLATO Mission Consortium. This involves the on-going mechanical integration and alignment, performance studies of the payload, the pipeline development and assessments of the scientific goals. PlatoSim is a state-of-the-art simulator that is able to produce the expected photometric observations of PLATO to a high level of accuracy. We demonstrate that PlatoSim is a key software tool for the PLATO mission in the preparatory phases until mission launch and prospectively beyond. △ Less

Submitted 8 May, 2024; v1 submitted 10 October, 2023; originally announced October 2023.

Comments: 30 pages, 22 figures

Journal ref: A&A 681, A18 (2024)

Ultrafast transfer of low-mass payloads to Mars and beyond using aerographite solar sails

Authors: Julius Karlapp, René Heller, Martin Tajmar

Abstract: With interstellar mission concepts now being under study by various space agencies and institutions, a feasible and worthy interstellar precursor mission concept will be key to the success of the long shot. Here we investigate interstellar-bound trajectories of solar sails made of the ultra-light material aerographite, known for its low density (0.18 kg m$^{-3}$) and high absorptivity (… ▽ More With interstellar mission concepts now being under study by various space agencies and institutions, a feasible and worthy interstellar precursor mission concept will be key to the success of the long shot. Here we investigate interstellar-bound trajectories of solar sails made of the ultra-light material aerographite, known for its low density (0.18 kg m$^{-3}$) and high absorptivity ($\mathcal{A}{\sim}1$), enabling remarkable solar irradiation-based acceleration. Payloads of up to 1 kg can swiftly traverse the solar system and the regions beyond. Our simulations consider various launch scenarios from a polar orbit around the Earth with direct outbound trajectories and Sun diver launches with subsequent outward acceleration. Utilizing the poliastro Python library, we calculate positions, velocities, and accelerations for a 1 kg spacecraft (including 720 g aerographite mass) with 10$^4$ m$^2$ of cross-sectional area, corresponding to a 56 m radius. A direct outward Mars transfer yields 65 km s$^{-1}$ in 26 d. The inward Mars transfer, with a sail deployment at a minimum distance of 0.6 AU, achieves 118 km s$^{-1}$ in 126 d. Transfer times and velocities vary due to the Earth-Mars constellation and initial injection trajectory. The direct interstellar trajectory peaks at 109 km s$^{-1}$, reaching interstellar space in 5.3 yr defined by the heliopause at 120 AU. Alternatively, the initial Sun dive to 0.6 AU provides 148 km s$^{-1}$ of escape velocity, reaching the heliopause in 4.2 yr. Values differ based on the minimum distance to the Sun. Presented concepts enable swift Mars flybys and interstellar space exploration. For delivery missions of sub-kg payloads, the deceleration remains a challenge. △ Less

Submitted 31 August, 2023; originally announced August 2023.

Comments: submitted to Acta Astronautica, Special Issue for the 8th Interstellar Symposium 2023, 8 pages, 10 Figures (5 col, 5 b/w), 1 Table

Variations in climate habitability parameters and their effect on Earth's biosphere during the Phanerozoic Eon

Authors: Iva Vilović, Dirk Schulze-Makuch, René Heller

Abstract: Essential insights on the characterization and quality of a detectable biosphere are gained by analyzing the effects of its environmental parameters. We compiled environmental and biological properties of the Phanerozoic Eon from various published data sets and conducted a correlation analysis to assess variations in parameters relevant to the habitability of Earth's biosphere. We showed that envi… ▽ More Essential insights on the characterization and quality of a detectable biosphere are gained by analyzing the effects of its environmental parameters. We compiled environmental and biological properties of the Phanerozoic Eon from various published data sets and conducted a correlation analysis to assess variations in parameters relevant to the habitability of Earth's biosphere. We showed that environmental parameters such as oxygen, global average surface temperatures, runoff rates and carbon dioxide are interrelated and play a key role in the changes of biomass and biodiversity. We showed that there were several periods with a highly thriving biosphere, with one even surpassing present day biodiversity and biomass. Those periods were characterized by increased oxygen levels and global runoff rates, as well as moderate global average surface temperatures, as long as no large or rapid positive and/or negative temperature excursions occurred. High oxygen contents are diagnostic of biomass production by continental plant life. We find that exceptionally high oxygen levels can at least in one instance compensate for decreased relative humidities, providing an even more habitable environment compared to today. Beyond Earth, these results will help us to understand how environmental parameters affect biospheres on extrasolar planets and guide us in our search for extraterrestrial life. △ Less

Submitted 16 August, 2023; originally announced August 2023.

Journal ref: Sci Rep 13, 12663 (2023)

RoSETZ: Roman Survey of the Earth Transit Zone -- a SETI-optimized survey for habitable-zone exoplanets

Authors: Eamonn Kerins, Supachai Awiphan, Kathryn Edmondson, Michael Garrett, Jacob Haqq-Misra, Rene Heller, Macy Huston, David Kip**, Ravi Kopparapu, Danny C. Price, Andrew Siemion, Siddhant Sharma Evan L. Sneed, Hector Socas-Navarro, Robert F. Wilson, Jason Wright

Abstract: In this White Paper for Nancy Grace Roman Space Telescope (Roman) science, we propose the Roman Survey of the Earth Transit Zone (RoSETZ), a transit search for rocky planets within the habitable zones (HZs) of stars located within the Earth Transit Zone (ETZ). The ETZ holds special interest in the search for extra-terrestrial intelligence (SETI) - observers on planets within the ETZ can see Earth… ▽ More In this White Paper for Nancy Grace Roman Space Telescope (Roman) science, we propose the Roman Survey of the Earth Transit Zone (RoSETZ), a transit search for rocky planets within the habitable zones (HZs) of stars located within the Earth Transit Zone (ETZ). The ETZ holds special interest in the search for extra-terrestrial intelligence (SETI) - observers on planets within the ETZ can see Earth as a transiting planet. RoSETZ would augment the Roman Galactic Bulge Time Domain Survey (GBTDS) as an additional field located $\sim 5$~degrees away from other GBTDS fields. Our simulations show that RoSETZ alone can find from 120 to 630 Earth-sized HZ planets around K- and M-type hosts, with the range reflecting different survey design assumptions. These yields are 5-20 times the number currently known. Such a sample will transform our knowledge of ``Eta-Earth'' ($η_{\oplus}$) -- the occurrence of Earth-sized HZ planets -- and would be the first catalogue of exoplanets selected in a manner optimized according to the Mutual Detectability targetted-SETI strategy. If it can be accommodated alongside the existing GBTDS design, we favour a RoSETZ-Max design that is observed for the duration of the GBTDS. If not, we show that a slimmed-down RoSETZ-Lite design, occupying two GBTDS seasons, would not significantly impact overall GBTDS exoplanet yields, even if time allocated to it had to come from time allocations to other fields. We argue that the angular separation of RoSETZ from other GBTDS fields permits self-calibration of systematic uncertainties that would otherwise hamper exoplanet demographic modelling of both microlensing and transit datasets. Other science possible with RoSETZ data include studies of small solar system bodies and high resolution 3D extinction map**. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Comments: 20 pages. Submission to the NASA Roman Core Community Surveys White Paper Call

Design and performance of the Fermilab Constant Fraction Discriminator ASIC

Authors: Si Xie, Artur Apresyan, Ryan Heller, Christopher Madrid, Irene Dutta, Aram Hayrapetyan, Sergey Los, Cristian Pena, Tom Zimmerman

Abstract: We present the design and performance characterization results of the novel Fermilab Constant Fraction Discriminator ASIC (FCFD) developed to readout low gain avalanche detector (LGAD) signals by directly using a constant fraction discriminator (CFD) to measure signal arrival time. Silicon detectors with time resolutions less than 30 ps will play a critical role in future collider experiments, and… ▽ More We present the design and performance characterization results of the novel Fermilab Constant Fraction Discriminator ASIC (FCFD) developed to readout low gain avalanche detector (LGAD) signals by directly using a constant fraction discriminator (CFD) to measure signal arrival time. Silicon detectors with time resolutions less than 30 ps will play a critical role in future collider experiments, and LGADs have been demonstrated to provide the required time resolution and radiation tolerance for many such applications. The FCFD has a specially designed discriminator that is robust against amplitude variations of the signal from the LGAD that normally requires an additional correction step when using a traditional leading edge discriminator based measurement. The application of the CFD directly in the ASIC promises to be more reliable and reduces the complication of timing detectors during their operation. We will present a summary of the measured performance of the FCFD for input signals generated by internal charge injection, LGAD signals from an infrared laser, and LGAD signals from minimum-ionizing particles. The mean time response for a wide range of LGAD signal amplitudes has been measured to vary no more than 15 ps, orders of magnitude more stable than an uncorrected leading edge discriminator based measurement, and effectively removes the need for any additional time-walk correction. The measured contribution to the time resolution from the FCFD ASIC is also found to be 10 ps for signals with charge above 20 fC. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Report number: FERMILAB-PUB-23-248-PPD

TOI-2525 b and c: A pair of massive warm giant planets with a strong transit timing variations revealed by TESS

Authors: Trifon Trifonov, Rafael Brahm, Andres Jordan, Christian Hartogh, Thomas Henning, Melissa J. Hobson, Martin Schlecker, Saburo Howard, Finja Reichardt, Nestor Espinoza, Man Hoi Lee, David Nesvorny, Felipe I. Rojas, Khalid Barkaoui, Diana Kossakowski, Gavin Boyle, Stefan Dreizler, Martin Kuerster, Rene Heller, Tristan Guillot, Amaury H. M. J. Triaud, Lyu Abe, Abdelkrim Agabi, Philippe Bendjoya, Nicolas Crouzet , et al. (22 additional authors not shown)

Abstract: TOI-2525 is a K-type star with an estimated mass of M = 0.849$_{-0.033}^{+0.024}$ M$_\odot$ and radius of R = 0.785$_{-0.007}^{+0.007}$ R$_\odot$ observed by the TESS mission in 22 sectors (within sectors 1 and 39). The TESS light curves yield significant transit events of two companions, which show strong transit timing variations (TTVs) with a semi-amplitude of a $\sim$6 hours. We performed TTV… ▽ More TOI-2525 is a K-type star with an estimated mass of M = 0.849$_{-0.033}^{+0.024}$ M$_\odot$ and radius of R = 0.785$_{-0.007}^{+0.007}$ R$_\odot$ observed by the TESS mission in 22 sectors (within sectors 1 and 39). The TESS light curves yield significant transit events of two companions, which show strong transit timing variations (TTVs) with a semi-amplitude of a $\sim$6 hours. We performed TTV dynamical, and photo-dynamical light curve analysis of the TESS data, combined with radial velocity (RV) measurements from FEROS and PFS, and we confirmed the planetary nature of these companions. The TOI-2525 system consists of a transiting pair of planets comparable to Neptune and Jupiter with estimated dynamical masses of $m_{\rm b}$ = 0.088$_{-0.004}^{+0.005}$ M$_{\rm Jup.}$, and $m_{\rm c}$ = 0.709$_{-0.033}^{+0.034}$ M$_{\rm Jup.}$, radius of $r_b$ = 0.88$_{-0.02}^{+0.02}$ R$_{\rm Jup.}$ and $r_c$ = 0.98$_{-0.02}^{+0.02}$ R$_{\rm Jup.}$, and with orbital periods of $P_{\rm b}$ = 23.288$_{-0.002}^{+0.001}$ days and $P_{\rm c}$ = 49.260$_{-0.001}^{+0.001}$ days for the inner and the outer planet, respectively. The period ratio is close to the 2:1 period commensurability, but the dynamical simulations of the system suggest that it is outside the mean motion resonance (MMR) dynamical configuration. TOI-2525 b is among the lowest density Neptune-mass planets known to date, with an estimated median density of $ρ_{\rm b}$ = 0.174$_{-0.015}^{+0.016}$ g\,cm$^{-3}$. The TOI-2525 system is very similar to the other K-dwarf systems discovered by TESS, TOI-2202 and TOI-216, which are composed of almost identical K-dwarf primary and two warm giant planets near the 2:1 MMR. △ Less

Submitted 11 February, 2023; originally announced February 2023.

Comments: Accepted for publication in AJ

Simultaneous directional inference

Authors: Ruth Heller, Aldo Solari

Abstract: We consider the problem of inference on the signs of $n>1$ parameters. We aim to provide $1-α$ post-hoc confidence bounds on the number of positive and negative (or non-positive) parameters. The guarantee is simultaneous, for all subsets of parameters. Our suggestion is as follows: start by using the data to select the direction of the hypothesis test for each parameter; then, adjust the $p$-value… ▽ More We consider the problem of inference on the signs of $n>1$ parameters. We aim to provide $1-α$ post-hoc confidence bounds on the number of positive and negative (or non-positive) parameters. The guarantee is simultaneous, for all subsets of parameters. Our suggestion is as follows: start by using the data to select the direction of the hypothesis test for each parameter; then, adjust the $p$-values of the one-sided hypotheses for the selection, and use the adjusted $p$-values for simultaneous inference on the selected $n$ one-sided hypotheses. The adjustment is straightforward assuming that the $p$-values of one-sided hypotheses have densities with monotone likelihood ratio, and are mutually independent. We show that the bounds we provide are tighter (often by a great margin) than existing alternatives, and that they can be obtained by at most a polynomial time. We demonstrate the usefulness of our simultaneous post-hoc bounds in the evaluation of treatment effects across studies or subgroups. Specifically, we provide a tight lower bound on the number of studies which are beneficial, as well as on the number of studies which are harmful (or non-beneficial), and in addition conclude on the effect direction of individual studies, while guaranteeing that the probability of at least one wrong inference is at most 0.05. △ Less

Submitted 6 August, 2023; v1 submitted 4 January, 2023; originally announced January 2023.

Comments: 59 pages, 11 figures, 7 tables

Journal ref: Ruth Heller, Aldo Solari, Simultaneous directional inference, Journal of the Royal Statistical Society Series B: Statistical Methodology, 2023

Inference with approximate local false discovery rates

Authors: Rajesh Karmakar, Ruth Heller, Saharon Rosset

Abstract: Efron's two-group model is widely used in large scale multiple testing. This model assumes that test statistics are mutually independent, however in realistic settings they are typically dependent, and taking the dependence into account can boost power. The general two-group model takes the dependence between the test statistics into account. Optimal policies in the general two-group model require… ▽ More Efron's two-group model is widely used in large scale multiple testing. This model assumes that test statistics are mutually independent, however in realistic settings they are typically dependent, and taking the dependence into account can boost power. The general two-group model takes the dependence between the test statistics into account. Optimal policies in the general two-group model require calculation, for each hypothesis, of the probability that it is a true null given all test statistics, denoted local false discovery rate (locFDR). Unfortunately, calculating locFDRs under realistic dependence structures can be computationally prohibitive. We propose calculating approximate locFDRs based on a properly defined N-neighborhood for each hypothesis. We prove that by thresholding the approximate locFDRs with a fixed threshold, the marginal false discovery rate is controlled for any dependence structure. Furthermore, we prove that this is the optimal procedure in a restricted class of decision rules, where decision for each hypothesis is only guided by its N-neighborhood. We show through extensive simulations that our proposed method achieves substantial power gains compared to alternative practical approaches, while maintaining conceptual simplicity and computational feasibility. We demonstrate the utility of our method on a genome wide association study of height. △ Less

Submitted 17 December, 2022; originally announced December 2022.

Comments: 34 pages, 2 figures, 4 tables

Inferring on joint associations from marginal associations and a reference sample

Authors: Tzviel Frostig, Ruth Heller

Abstract: We present a method to infer on joint regression coefficients obtained from marginal regressions using a reference panel. This type of scenario is common in genetic fine-map**, where the estimated marginal associations are reported in genomewide association studies (GWAS), and a reference panel is used for inference on the association in a joint regression model. We show that ignoring the uncert… ▽ More We present a method to infer on joint regression coefficients obtained from marginal regressions using a reference panel. This type of scenario is common in genetic fine-map**, where the estimated marginal associations are reported in genomewide association studies (GWAS), and a reference panel is used for inference on the association in a joint regression model. We show that ignoring the uncertainty due to the use of a reference panel instead of the original design matrix, can lead to a severe inflation of false discoveries and a lack of replicable findings. We derive the asymptotic distribution of the estimated coefficients in the joint regression model, and show how it can be used to produce valid inference. We address two settings: inference within regions that are pre-selected, as well as within regions that are selected based on the same data. By means of real data examples and simulations we demonstrate the usefulness of our suggested methodology. △ Less

Submitted 4 December, 2022; originally announced December 2022.

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

Authors: Christopher Madrid, Ryan Heller, Claudio San Martín, Shirsendu Nanda, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele Giacomini, Ohannes Kamer Köseyan, Sergey Los, Cristián Peña, René Rios, Alessandro Tricoli, Si Xie, Zhenyu Ye

Abstract: We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-bas… ▽ More We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 micron and 32 ps resolutions from strips of 1 cm length and 500 micron pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC. △ Less

Submitted 20 April, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Protocol for an Observational Study on the Effects of Giving Births from Unintended Pregnancies on Later Life Physical and Mental Health

Authors: Samrat Roy, Marina Bogomolov, Ruth Heller, Amy M. Claridge, Tishra Beeson, Dylan S. Small

Abstract: There has been increasing interest in studying the effect of giving births to unintended pregnancies on later life physical and mental health. In this article, we provide the protocol for our planned observational study on the long-term mental and physical health consequences for mothers who bear children resulting from unintended pregnancies. We aim to use the data from the Wisconsin Longitudinal… ▽ More There has been increasing interest in studying the effect of giving births to unintended pregnancies on later life physical and mental health. In this article, we provide the protocol for our planned observational study on the long-term mental and physical health consequences for mothers who bear children resulting from unintended pregnancies. We aim to use the data from the Wisconsin Longitudinal Study (WLS) and examine the effect of births from unintended pregnancies on a broad range of outcomes, including mental depression, psychological well-being, physical health, alcohol usage, and economic well-being. To strengthen our causal findings, we plan to address our research questions on two subgroups, Catholics and non-Catholics, and discover the "replicable" outcomes for which the effect of unintended pregnancy is negative (or, positive) in both subgroups. Following the idea of non-random cross-screening, the data will be split according to whether the woman is Catholic or not, and then one part of the data will be used to select the hypotheses and design the corresponding tests for the second part of the data. In past use of cross-screening (automatic cross-screening) there was only one team of investigators that dealt with both parts of the data so that the investigators would need to decide on an analysis plan before looking at the data. In this protocol, we describe plans to carry out a novel flexible cross-screening in which there will be two teams of investigators with access only to one part of data and each team will use their part of the data to decide how to plan the analysis for the second team's data. In addition to the above replicability analysis, we also discuss the plan to test the global null hypothesis that is intended to identify the outcomes which are affected by unintended pregnancy for at least one of the two subgroups of Catholics and non-Catholics. △ Less

Submitted 30 April, 2023; v1 submitted 11 October, 2022; originally announced October 2022.

Comments: 29 pages

MSC Class: 62P25; 62F03

Replicability Across Multiple Studies

Authors: Marina Bogomolov, Ruth Heller

Abstract: Meta-analysis is routinely performed in many scientific disciplines. This analysis is attractive since discoveries are possible even when all the individual studies are underpowered. However, the meta-analytic discoveries may be entirely driven by signal in a single study, and thus non-replicable. Although the great majority of meta-analyses carried out to date do not infer on the replicability of… ▽ More Meta-analysis is routinely performed in many scientific disciplines. This analysis is attractive since discoveries are possible even when all the individual studies are underpowered. However, the meta-analytic discoveries may be entirely driven by signal in a single study, and thus non-replicable. Although the great majority of meta-analyses carried out to date do not infer on the replicability of their findings, it is possible to do so. We provide a selective overview of analyses that can be carried out towards establishing replicability of the scientific findings. We describe methods for the setting where a single outcome is examined in multiple studies (as is common in systematic reviews of medical interventions), as well as for the setting where multiple studies each examine multiple features (as in genomics applications). We also discuss some of the current shortcomings and future directions. △ Less

Submitted 8 May, 2023; v1 submitted 2 October, 2022; originally announced October 2022.

Comments: 30 pages

The TEMPO Survey I: Predicting Yields of the Transiting Exosatellites, Moons, and Planets from a 30-day Survey of Orion with the Nancy Grace Roman Space Telescope

Authors: Mary Anne Limbach, Melinda Soares-Furtado, Andrew Vanderburg, William M. J. Best, Ann Marie Cody, Elena D'Onghia, René Heller, Brandon S. Hensley, Marina Kounkel, Adam Kraus, Andrew W. Mann, Massimo Robberto, Anna L. Rosen, Richard Townsend, Johanna M. Vos

Abstract: We present design considerations for the Transiting Exosatellites, Moons, and Planets in Orion (TEMPO) Survey with the Nancy Grace Roman Space Telescope. This proposed 30-day survey is designed to detect a population of transiting extrasolar satellites, moons, and planets in the Orion Nebula Cluster (ONC). The young (1-3 Myr), densely-populated ONC harbors about a thousand bright brown dwarfs (BDs… ▽ More We present design considerations for the Transiting Exosatellites, Moons, and Planets in Orion (TEMPO) Survey with the Nancy Grace Roman Space Telescope. This proposed 30-day survey is designed to detect a population of transiting extrasolar satellites, moons, and planets in the Orion Nebula Cluster (ONC). The young (1-3 Myr), densely-populated ONC harbors about a thousand bright brown dwarfs (BDs) and free-floating planetary-mass objects (FFPs). TEMPO offers sufficient photometric precision to monitor FFPs with ${\rm M}\geq1{\rm M}_{\rm J}$ for transiting satellites. The survey is also capable of detecting FFPs down to sub-Saturn masses via direct imaging, although follow-up confirmation will be challenging. TEMPO yield estimates include 14 (3-22) exomoons/satellites transiting FFPs and 54 (8-100) satellites transiting BDs. Of this population, approximately $50\%$ of companions would be "super-Titans" (Titan to Earth mass). Yield estimates also include approximately $150$ exoplanets transiting young Orion stars, of which $>50\%$ will orbit mid-to-late M dwarfs and approximately ten will be proto-habitable zone, terrestrial ($0.1{\rm M}_{\oplus} - 5{\rm M}_{\oplus}$) exoplanets. TEMPO would provide the first census demographics of small exosatellites orbiting FFPs and BDs, while simultaneously offering insights into exoplanet evolution at the earliest stages. This detected exosatellite population is likely to be markedly different from the current census of exoplanets with similar masses (e.g., Earth-mass exosatellites that still possess H/He envelopes). Although our yield estimates are highly uncertain, as there are no known exoplanets or exomoons analogous to these satellites, the TEMPO survey would test the prevailing theories of exosatellite formation and evolution, which limit the certainty surrounding detection yields. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: Submitted to PASP

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Transit least-squares survey IV. Earth-like transiting planets expected from the PLATO mission

Authors: René Heller, Jan-Vincent Harre, Réza Samadi

Abstract: In its long-duration observation phase, the PLATO satellite will observe two non-overlap** fields for a total of 4 yr. The exact duration of each pointing will be determined 2 yr before launch. Previous estimates of PLATO's yield of Earth-sized planets in the habitable zones (HZs) around solar-type stars ranged between 6 and 280. We use the PLATO Solar-like Light curve Simulator (PSLS) to simula… ▽ More In its long-duration observation phase, the PLATO satellite will observe two non-overlap** fields for a total of 4 yr. The exact duration of each pointing will be determined 2 yr before launch. Previous estimates of PLATO's yield of Earth-sized planets in the habitable zones (HZs) around solar-type stars ranged between 6 and 280. We use the PLATO Solar-like Light curve Simulator (PSLS) to simulate light curves with transiting planets around bright (m_V > 11) Sun-like stars at a cadence of 25 s, roughly representative of the >15,000 targets in PLATO's high-priority P1 sample (mostly F5-K7 dwarfs and sub-dwarfs). Our study includes light curves generated from synchronous observations of 6, 12, 18, and 24 of PLATO's 12 cm aperture cameras over both 2 yr and 3 yr of continuous observations. Automated detrending is done with the Wotan software and post-detrending transit detection is performed with the Transit Least Squares (TLS) algorithm. We scale the true positive rates (TPRs) with the expected number of stars in the P1 sample and with modern estimates of the exoplanet occurrence rates and predict the detection of planets with 0.5 R_E <= R_p <= 1.5 R_E in the HZs around F5-K7 dwarf stars. For the (2 yr + 2 yr) long-duration observation phase strategy we predict 11-34 detections, for the (3 yr + 1 yr) strategy we predict 8-25 discoveries. Our study of the effects of stellar variability on shallow transits of Earth-like planets illustrates that our estimates of PLATO's planet yield, which we derive using a photometrically quiet star like the Sun, must be seen as upper limits. In conclusion, PLATO's detection of about a dozen Earth-sized planets in the HZs around solar-type stars will mean a major contribution to this yet poorly sampled part of the exoplanet parameter space with Earth-like planets. △ Less

Submitted 6 July, 2022; v1 submitted 4 June, 2022; originally announced June 2022.

Comments: published in Astronomy & Astrophysics (2022), 19 pages, 17 Figures (16 col., 1 b/w), 2 Tables

Journal ref: A&A 665, A11 (2022)

Pandora: A fast open-source exomoon transit detection algorithm

Authors: Michael Hippke, René Heller

Abstract: We present Pandora, a new software to model, detect, and characterize transits of extrasolar planets with moons in stellar photometric time series. Pandora uses an analytical description of the transit light curve for both the planet and the moon in front of a star with atmospheric limb darkening and it covers all cases of mutual planet-moon eclipses during transit. The orbital motion of the star-… ▽ More We present Pandora, a new software to model, detect, and characterize transits of extrasolar planets with moons in stellar photometric time series. Pandora uses an analytical description of the transit light curve for both the planet and the moon in front of a star with atmospheric limb darkening and it covers all cases of mutual planet-moon eclipses during transit. The orbital motion of the star-planet-moon system is computed with a high accuracy as a nested Keplerian problem. We have optimized Pandora for computational speed to make it suitable for large-scale exomoon searches in the new era of space-based high-accuracy surveys. We demonstrate the usability of Pandora for exomoon searches by first simulating a light curve with four transits of a hypothetical Jupiter with a giant Neptune-sized exomoon in a one-year orbit around a Sun-like star. The 10 min cadence of the data matches that of the upcoming PLATO mission and the noise of 100 parts per million is dominated by photon noise, assuming a photometrically quiet, $m_V = 11$ Sun-like star for practicality. We recovered the simulated system parameters with the UltraNest Bayesian inference package. The run-time of this search is about five hours on a standard computer. Pandora is the first photodynamical open-source exomoon transit detection algorithm, implemented fully in the Python programming language and available for the community to join the search for exomoons. △ Less

Submitted 19 May, 2022; originally announced May 2022.

Comments: A&A in press

4-Dimensional Trackers

Authors: Doug Berry, Valentina Cairo, Angelo Dragone, Matteo Centis-Vignali, Gabriele Giacomini, Ryan Heller, Sergo **dariani, Adriano Lai, Lucie Linssen, Ron Lipton, Chris Madrid, Bojan Markovic, Simone Mazza, Jennifer Ott, Ariel Schwartzman, Hannsjörg Weber, Zhenyu Ye

Abstract: 4-dimensional (4D) trackers with ultra fast timing (10-30 ps) and very fine spatial resolution (O(few $μ$m)) represent a new avenue in the development of silicon trackers, enabling new physics capabilities beyond the reach of the existing tracking detectors. This paper reviews the impact of integrating 4D tracking capabilities on several physics benchmarks both in potential upgrades of the HL-LHC… ▽ More 4-dimensional (4D) trackers with ultra fast timing (10-30 ps) and very fine spatial resolution (O(few $μ$m)) represent a new avenue in the development of silicon trackers, enabling new physics capabilities beyond the reach of the existing tracking detectors. This paper reviews the impact of integrating 4D tracking capabilities on several physics benchmarks both in potential upgrades of the HL-LHC experiments and in several detectors at future colliders, and summarizes the currently available sensor technologies as well as electronics, along with their limitations and directions for R$\&$D. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: 26 pages, contribution to Snowmass 2021

Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam

Authors: Ryan Heller, Christopher Madrid, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Ikumi Goya, Kazuhiko Hara, Sayuka Kita, Sergey Los, Adam Molnar, Koji Nakamura, Cristián Peña, Claudio San Martín, Alessandro Tricoli, Tatsuki Ueda, Si Xie

Abstract: We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows deta… ▽ More We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch. △ Less

Submitted 29 March, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Signal preservation of exomoon transits during light curve folding

Authors: René Heller, Michael Hippke

Abstract: In the search for moons around extrasolar planets, astronomers are confronted with a stunning observation. Although 3400 of the 4500 exoplanets were discovered with the transit method and although there are well over 25 times as many moons than planets known in the Solar System (two of which are larger than Mercury), no exomoon has been discovered. In the search for exoplanet transits, stellar lig… ▽ More In the search for moons around extrasolar planets, astronomers are confronted with a stunning observation. Although 3400 of the 4500 exoplanets were discovered with the transit method and although there are well over 25 times as many moons than planets known in the Solar System (two of which are larger than Mercury), no exomoon has been discovered. In the search for exoplanet transits, stellar light curves are usually phase-folded over a range of trial epochs and periods. This approach, however, is not applicable in a straightforward manner to exomoons. Planet-moon transits either have to be modeled in great detail (including their orbital dynamics, mutual eclipses etc.), which is computationally expensive, or key simplifications have to be assumed. One such simplification is to search for moon transits outside of the planetary transits. The question we address in this report is how much in-transit data of an exomoon remains uncontaminated by the near-simultaneous transits of its host planet. We develop an analytical framework and test our results with a numerical planet-moon transit simulator. For exomoons similar to the Galilean moons, only a small fraction of their in-transit data is uncontaminated by planetary transits: 14% for Io, 20% for Europa, 42% for Ganymede, and 73% for Callisto. The S/N of an out-of-planetary-transit folding technique is reduced compared to a full transit model to about 38% (Io), 45% (Europa), 65% (Ganymede), and 85% (Callisto), respectively. For the Earth's Moon, we find an uncontaminated data fraction of typically just 18% and a resulting S/N reduction to 42%. These values are astonishingly small. The gain in speed for any exomoon transit search algorithm that ignores the planetary in-transit data comes at the heavy price of losing a substantial fraction of what is supposedly a tiny signal in the first place. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: accepted in A&A, 5 pages, 4 Figures (2 col, 2 b/w)

A procedure for multiple testing of partial conjunction hypotheses based on a hazard rate inequality

Authors: Thorsten Dickhaus, Ruth Heller, Anh-Tuan Hoang, Yosef Rinott

Abstract: The partial conjunction null hypothesis is tested in order to discover a signal that is present in multiple studies. The standard approach of carrying out a multiple test procedure on the partial conjunction (PC) $p$-values can be extremely conservative. We suggest alleviating this conservativeness, by eliminating many of the conservative PC $p$-values prior to the application of a multiple test p… ▽ More The partial conjunction null hypothesis is tested in order to discover a signal that is present in multiple studies. The standard approach of carrying out a multiple test procedure on the partial conjunction (PC) $p$-values can be extremely conservative. We suggest alleviating this conservativeness, by eliminating many of the conservative PC $p$-values prior to the application of a multiple test procedure. This leads to the following two step procedure: first, select the set with PC $p$-values below a selection threshold; second, within the selected set only, apply a family-wise error rate or false discovery rate controlling procedure on the conditional PC $p$-values. The conditional PC $p$-values are valid if the null p-values are uniform and the combining method is Fisher. The proof of their validity is based on a novel inequality in hazard rate order of partial sums of order statistics which may be of independent interest. We also provide the conditions for which the false discovery rate controlling procedures considered will be below the nominal level. We demonstrate the potential usefulness of our novel method, CoFilter (conditional testing after filtering), for analyzing multiple genome wide association studies of Crohn's disease. △ Less

Submitted 13 June, 2024; v1 submitted 13 October, 2021; originally announced October 2021.

MSC Class: 62J15; 62F03; 62F05

On the Detection of Exomoons Transiting Isolated Planetary-Mass Objects

Authors: Mary Anne Limbach, Johanna M. Vos, Joshua N. Winn, Rene Heller, Jeffrey C. Mason, Adam C. Schneider, Fei Dai

Abstract: All-sky imaging surveys have identified several dozen isolated planetary-mass objects (IPMOs), far away from any star. Here, we examine the prospects for detecting transiting moons around these objects. We expect transiting moons to be common, occurring around 10-15% of IPMOs, given that close-orbiting moons have a high geometric transit probability and are expected to be a common outcome of giant… ▽ More All-sky imaging surveys have identified several dozen isolated planetary-mass objects (IPMOs), far away from any star. Here, we examine the prospects for detecting transiting moons around these objects. We expect transiting moons to be common, occurring around 10-15% of IPMOs, given that close-orbiting moons have a high geometric transit probability and are expected to be a common outcome of giant planet formation. IPMOs offer an advantage over other directly imaged planets in that high-contrast imaging is not necessary to detect the photometric transit signal. For at least 30 (>50%) of the currently known IPMOs, observations of a single transit with the James Webb Space Telescope would have low enough forecasted noise levels to allow for the detection of an Io-like or Titan-like moon. Intrinsic variability of the IPMOs will be an obstacle. Using archival time-series photometry of IPMOs with the Spitzer Space Telescope as a proof-of-concept, we found evidence for a fading event of 2MASS J1119-1137 AB that might have been caused by intrinsic variability, but is also consistent with a single transit of a habitable-zone 1.7$R_\oplus$ exomoon. Although the interpretation of this particular event is inconclusive, the characteristics of the data and the candidate signal suggest that Earth-sized habitable-zone exomoons around IPMOs are detectable with existing instrumentation. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: Accepted to ApJ Letters

Habitability Models for Astrobiology

Authors: Abel Méndez, Edgard E. Rivera-Valentín, Dirk Schulze-Makuch, Justin Filiberto, Ramses M. Ramírez, Tana Wood, Alfonso Dávila, Chris McKay, Kevin N. Ortiz Ceballos, Marcos Jusino-Maldonado, Nicole J. Torres-Santiago, Guillermo Nery, René Heller, Paul K. Byrne, Michael J. Malaska, Erica Nathan, Marta F. Simões, André Antunes, Jesús Martínez-Frías, Ludmila Carone, Noam R. Izenberg, Dimitra Atri, Humberto I. Carvajal Chitty, Priscilla Nowajewski-Barra, Frances Rivera-Hernández , et al. (9 additional authors not shown)

Abstract: Habitability has been generally defined as the capability of an environment to support life. Ecologists have been using Habitat Suitability Models (HSMs) for more than four decades to study the habitability of Earth from local to global scales. Astrobiologists have been proposing different habitability models for some time, with little integration and consistency among them, being different in fun… ▽ More Habitability has been generally defined as the capability of an environment to support life. Ecologists have been using Habitat Suitability Models (HSMs) for more than four decades to study the habitability of Earth from local to global scales. Astrobiologists have been proposing different habitability models for some time, with little integration and consistency among them, being different in function to those used by ecologists. Habitability models are not only used to determine if environments are habitable or not, but they also are used to characterize what key factors are responsible for the gradual transition from low to high habitability states. Here we review and compare some of the different models used by ecologists and astrobiologists and suggest how they could be integrated into new habitability standards. Such standards will help to improve the comparison and characterization of potentially habitable environments, prioritize target selections, and study correlations between habitability and biosignatures. Habitability models are the foundation of planetary habitability science and the synergy between ecologists and astrobiologists is necessary to expand our understanding of the habitability of Earth, the Solar System, and extrasolar planets. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: Published in Astrobiology, 21(8). arXiv admin note: substantial text overlap with arXiv:2007.05491

Combined analysis of HPK 3.1 LGADs using a proton beam, beta source, and probe station towards establishing high volume quality control

Authors: Ryan Heller, Andrés Abreu, Artur Apresyan, Roberta Arcidiacono, Nicolò Cartiglia, Karri DiPetrillo, Marco Ferrero, Meraj Hussain, Margaret Lazarovitz, Hakseong Lee, Sergey Los, Chang-Seong Moon, Cristián Peña, Federico Siviero, Valentina Sola, Tanvi Wamorkar, Si Xie

Abstract: The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD pr… ▽ More The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD prototypes developed for these detectors. We demonstrate that the LGAD response to high energy test beam particles is accurately reproduced with a beta source. We further establish that probe station measurements of the gain implant accurately predict the particle response and operating parameters of each sensor, and conclude that the uniformity of the gain implant in this production is sufficient to produce full-sized sensors for the ATLAS and CMS timing detectors. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Comments: 20 page, 20 figures

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

Sensitivity to millicharged particles in future proton-proton collisions at the LHC

Authors: A. Ball, J. Brooke, C. Campagnari, M. Carrigan, M. Citron, A De Roeck, M. Ezzeldine, B. Francis, M. Gastal, M. Ghimire, J. Goldstein, F. Golf, A. Haas, R. Heller, C. S. Hill, L. Lavezzo, R. Loos, S. Lowette, B. Manley, B. Marsh, D. W. Miller, B. Odegard, R. Schmitz, F. Setti H. Shakeshaft, D. Stuart , et al. (3 additional authors not shown)

Abstract: We report on the expected sensitivity of dedicated scintillator-based detectors at the LHC for elementary particles with charges much smaller than the electron charge. The dataset provided by a prototype scintillator-based detector is used to characterise the performance of the detector and provide an accurate background projection. Detector designs, including a novel slab detector configuration,… ▽ More We report on the expected sensitivity of dedicated scintillator-based detectors at the LHC for elementary particles with charges much smaller than the electron charge. The dataset provided by a prototype scintillator-based detector is used to characterise the performance of the detector and provide an accurate background projection. Detector designs, including a novel slab detector configuration, are considered for the data taking period of the LHC to start in 2022 (Run 3) and for the high luminosity LHC. With the Run 3 dataset, the existence of new particles with masses between 10 MeV and 45 GeV could be excluded at 95% confidence level for charges between 0.003e and 0.3e, depending on their mass. With the high luminosity LHC dataset, the expected limits would reach between 10 MeV and 80 GeV for charges between 0.0018e and 0.3e, depending on their mass △ Less

Submitted 13 August, 2021; v1 submitted 14 April, 2021; originally announced April 2021.

Journal ref: Phys. Rev. D 104 (2021) 032002

Optimal multiple testing and design in clinical trials

Authors: Ruth Heller, Abba Krieger, Saharon Rosset

Abstract: A central goal in designing clinical trials is to find the test that maximizes power (or equivalently minimizes required sample size) for finding a false null hypothesis subject to the constraint of type I error. When there is more than one test, such as in clinical trials with multiple endpoints, the issues of optimal design and optimal procedures become more complex. In this paper we address the… ▽ More A central goal in designing clinical trials is to find the test that maximizes power (or equivalently minimizes required sample size) for finding a false null hypothesis subject to the constraint of type I error. When there is more than one test, such as in clinical trials with multiple endpoints, the issues of optimal design and optimal procedures become more complex. In this paper we address the question of how such optimal tests should be defined and how they can be found. We review different notions of power and how they relate to study goals, and also consider the requirements of type I error control and the nature of the procedures. This leads us to an explicit optimization problem with objective and constraints which describe its specific desiderata. We present a complete solution for deriving optimal procedures for two hypotheses, which have desired monotonicity properties, and are computationally simple. For some of the optimization formulations this yields optimal procedures that are identical to existing procedures, such as Hommel's procedure or the procedure of Bittman et al. (2009), while for others it yields completely novel and more powerful policies than existing ones. We demonstrate the nature of our novel policies and their improved power extensively in simulation and on the APEX study (Cohen et al., 2016). △ Less

Submitted 13 June, 2022; v1 submitted 3 April, 2021; originally announced April 2021.

MSC Class: 62K05

Journal ref: Biometrics, 2022

Experimental electronic stop** cross section of tungsten for light ions in a large energy interval

Authors: M. V. Moro, P. M. Wolf, B. Bruckner, F. Munnik, R. Heller, P. Bauer, D. Primetzhofer

Abstract: Electronic stop** cross section of tungsten for light ions was experimentally measured in a wide energy interval (20 to 6000 keV for protons and 50 to 9000 keV for helium) in backscattering and transmission geometries. The measurements were carried out in three laboratories (Austria, Germany and Sweden) using five different set-ups, the stop** data deduced from different data sets showed excel… ▽ More Electronic stop** cross section of tungsten for light ions was experimentally measured in a wide energy interval (20 to 6000 keV for protons and 50 to 9000 keV for helium) in backscattering and transmission geometries. The measurements were carried out in three laboratories (Austria, Germany and Sweden) using five different set-ups, the stop** data deduced from different data sets showed excellent agreement amongst each other, with total uncertainty varying within 1.5 - 3.8\% for protons and 2.2 - 5.5\% for helium, averaged over the respective energy range of each data set. The final data is compared to available data and to widely adopted semi-empirical and theoretical approaches, and found to be in good agreement with most adopted models at energies around and above the stop** maximum. Most importantly, our results extend the energy regime towards lower energies, and are thus of high technological relevance, e.g., in fusion research. At these low energies, our findings also revealed that tungsten - featured with fully and partially occupied f- and d-subshells, respectively, can be modeled as an electron gas for the energy loss process. △ Less

Submitted 1 March, 2021; originally announced March 2021.

A statistical framework for efficient out of distribution detection in deep neural networks

Authors: Matan Haroush, Tzviel Frostig, Ruth Heller, Daniel Soudry

Abstract: Background. Commonly, Deep Neural Networks (DNNs) generalize well on samples drawn from a distribution similar to that of the training set. However, DNNs' predictions are brittle and unreliable when the test samples are drawn from a dissimilar distribution. This is a major concern for deployment in real-world applications, where such behavior may come at a considerable cost, such as industrial pro… ▽ More Background. Commonly, Deep Neural Networks (DNNs) generalize well on samples drawn from a distribution similar to that of the training set. However, DNNs' predictions are brittle and unreliable when the test samples are drawn from a dissimilar distribution. This is a major concern for deployment in real-world applications, where such behavior may come at a considerable cost, such as industrial production lines, autonomous vehicles, or healthcare applications. Contributions. We frame Out Of Distribution (OOD) detection in DNNs as a statistical hypothesis testing problem. Tests generated within our proposed framework combine evidence from the entire network. Unlike previous OOD detection heuristics, this framework returns a $p$-value for each test sample. It is guaranteed to maintain the Type I Error (T1E - incorrectly predicting OOD for an actual in-distribution sample) for test data. Moreover, this allows to combine several detectors while maintaining the T1E. Building on this framework, we suggest a novel OOD procedure based on low-order statistics. Our method achieves comparable or better results than state-of-the-art methods on well-accepted OOD benchmarks, without retraining the network parameters or assuming prior knowledge on the test distribution -- and at a fraction of the computational cost. △ Less

Submitted 31 March, 2022; v1 submitted 25 February, 2021; originally announced February 2021.

Digital color codes of stars

Authors: Jan-Vincent Harre, René Heller

Abstract: Publications in astrophysics are nowadays mainly published and read in digitized formats. Astrophysical publications in both research and in popular outreach often use colorful representations of stars to indicate various stellar types, that is, different spectral types or effective temperatures. Computer generated and computer displayed imagery has become an integral part of stellar astrophysics… ▽ More Publications in astrophysics are nowadays mainly published and read in digitized formats. Astrophysical publications in both research and in popular outreach often use colorful representations of stars to indicate various stellar types, that is, different spectral types or effective temperatures. Computer generated and computer displayed imagery has become an integral part of stellar astrophysics communication. There is, however, no astrophysically motivated standard color palette for illustrative representations of stars and some stars are actually represented in misleading colors. We use pre-computed PHOENIX and TLUSTY stellar model spectra and convolve them with the three standard color matching functions for human color perception between 360$\,$nm and 830$\,$nm. The color matching functions represent the three sets of receptors in the eye that respond to red, green, and blue light. For a grid of main sequence stars with effective temperatures between 2300$\,$K and 55,000$\,$K of different metallicities we present the red-blue-green and hexadecimal color codes that can be used for digitized color representations of stars as if seen from space. We find significant deviations between the color codes of stars computed from stellar spectra and from a black body radiator of the same effective temperature. We illustrate the main sequence in the color wheel and demonstrate that there are no yellow, green, cyan, or purple stars. Red dwarf stars (spectral types M0V - M9V) actually look orange to the human eye. Old white dwarfs such as WD$\,$1856$+$534, host to a newly discovered transiting giant planet candidate, occur pale orange to the human eye, not white. Our freely available software can be used to generate color codes for any input spectrum such as those from planets, galaxies, quasars etc. △ Less

Submitted 24 February, 2021; v1 submitted 15 January, 2021; originally announced January 2021.

Comments: 13 pages, 5 figures, published in Astronomische Nachrichten / Astronomical Notes

Astrophysical Simulations and Data Analyses on the Formation, Detection, and Habitability of Moons Around Extrasolar Planets

Authors: René Heller

Abstract: While the solar system contains as many as about 20 times more moons than planets, no moon has been definitively detected around any of the thousands of extrasolar planets so far. The question naturally arises why an exomoon detection has not yet been achieved. This cumulative habilitation thesis covers three of the key aspects related to the ongoing search for extrasolar moons: 1. the possible fo… ▽ More While the solar system contains as many as about 20 times more moons than planets, no moon has been definitively detected around any of the thousands of extrasolar planets so far. The question naturally arises why an exomoon detection has not yet been achieved. This cumulative habilitation thesis covers three of the key aspects related to the ongoing search for extrasolar moons: 1. the possible formation scenarios for moons around extrasolar planets; 2. new detection strategies for these moons; and 3. the potential of exomoons as hosts to extrasolar life. This work is structured as follows. Part I gives a broad introduction to the field of extrasolar moons with special attention to their formation, detection, and habitability. Part II presents the cumulative part of this thesis with a total of 16 peer-reviewed journal publications listing the author of this thesis as a lead author, and six publications with the author of this thesis as a co-author. Part III shares some insights into our ongoing research on exomoons in collaboration with master student Anina Timmermann at the Georg-August University of Göttingen and former PhD student Kai Rodenbeck at the International Max Planck Research School for Solar System Science and the University of Göttingen. The Appendix is a collection of non-peer-reviewed conference proceedings and popular science publications by the author that further disseminate our research of extrasolar moons. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: Habilitation thesis, accepted by Georg August University Göttingen, 433 pages, collection of 22 peer-reviewed articles on exomoons (authors' versions)

Low-cost precursor of an interstellar mission

Authors: René Heller, Guillem Anglada-Escudé, Michael Hippke, Pierre Kervella

Abstract: The solar photon pressure provides a viable source of thrust for spacecraft in the solar system. Theoretically it could also enable interstellar missions, but an extremely small mass per cross section area is required to overcome the solar gravity. We identify aerographite, a synthetic carbon-based foam with a density of 0.18 kg/m^3 (15,000 times more lightweight than aluminum) as a versatile mate… ▽ More The solar photon pressure provides a viable source of thrust for spacecraft in the solar system. Theoretically it could also enable interstellar missions, but an extremely small mass per cross section area is required to overcome the solar gravity. We identify aerographite, a synthetic carbon-based foam with a density of 0.18 kg/m^3 (15,000 times more lightweight than aluminum) as a versatile material for highly efficient propulsion with sunlight. A hollow aerographite sphere with a shell thickness eps_shl = 1 mm could go interstellar upon submission to the solar radiation in interplanetary space. Upon launch at 1 AU from the Sun, an aerographite shell with eps_shl = 0.5 mm arrives at the orbit of Mars in 60 d and at Pluto's orbit in 4.3 yr. Release of an aerographite hollow sphere, whose shell is 1 micrometer thick, at 0.04 AU (the closest approach of the Parker Solar Probe) results in an escape speed of nearly 6900 km/s and 185 yr of travel to the distance of our nearest star, Proxima Centauri. The infrared signature of a meter-sized aerographite sail could be observed with JWST up to 2 AU from the Sun, beyond the orbit of Mars. An aerographite hollow sphere with eps_shl = 100 micrometer and a radius of 1 m (5 m) weighs 230 mg (5.7 g) and has a 2.2 g (55 g) mass margin for interstellar escape. The payload margin is ten times the mass of the spacecraft, whereas the payload on chemical interstellar rockets is typically a thousandth of the weight of the rocket. Simplistic communication would enable studies of the interplanetary medium and a search for the suspected Planet Nine, and would serve as a precursor mission to alpha Centauri. We estimate prototype developments costs of 1 million USD, a price of 1000 USD per sail, and a total of <10 million USD including launch for a piggyback concept with an interplanetary mission. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: accepted in A&A, 13 pages, 9 Figures (6 col, 3 b/w), 1 Table

Journal ref: A&A 641, A45 (2020)

Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data

Authors: M. Tornago, R. Arcidiacono, N. Cartiglia, M. Costa, M. Ferrero, M. Mandurrino, F. Siviero, V. Sola, A. Staiano, A. Apresyan, K. Di Petrillo, R. Heller, S. Los, G. Borghi, M. Boscardin, G-F Dalla Betta, F. Ficorella, L. Pancheri, G. Paternoster, H. Sadrozinski, A. Seiden

Abstract: This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained v… ▽ More This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an im**ing particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the $n^+$ do** profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between $2.5\; μm$ for 70-100 pad-pitch geometry and $17\; μm$ with 200-500 matrices, a factor of 10 better than what is achievable in binary read-out ($bin\; size/ \sqrt{12}$). Beam test data show a temporal resolution of $\sim 40\; ps$ for 200-$μm$ pitch devices, in line with the best performances of LGAD sensors at the same gain. △ Less

Submitted 11 February, 2021; v1 submitted 18 July, 2020; originally announced July 2020.

Comments: 34 pages, 33 figures

Habitability Models for Planetary Sciences

Authors: Abel Méndez, Edgard G. Rivera-Valentín, Dirk Schulze-Makuch, Justin Filiberto, Ramses Ramírez, Tana E. Wood, Alfonso Dávila, Chris McKay, Kevin Ortiz Ceballos, Marcos Jusino-Maldonado, Guillermo Nery, René Heller, Paul Byrne, Michael J. Malaska, Erica Nathan, Marta Filipa Simões, André Antunes, Jesús Martínez-Frías, Ludmila Carone, Noam R. Izenberg, Dimitra Atri, Humberto Itic Carvajal Chitty, Priscilla Nowajewski-Barra, Frances Rivera-Hernández, Corine Brown , et al. (10 additional authors not shown)

Abstract: Habitability has been generally defined as the capability of an environment to support life. Ecologists have been using Habitat Suitability Models (HSMs) for more than four decades to study the habitability of Earth from local to global scales. Astrobiologists have been proposing different habitability models for some time, with little integration and consistency between them and different in func… ▽ More Habitability has been generally defined as the capability of an environment to support life. Ecologists have been using Habitat Suitability Models (HSMs) for more than four decades to study the habitability of Earth from local to global scales. Astrobiologists have been proposing different habitability models for some time, with little integration and consistency between them and different in function to those used by ecologists. In this white paper, we suggest a mass-energy habitability model as an example of how to adapt and expand the models used by ecologists to the astrobiology field. We propose to implement these models into a NASA Habitability Standard (NHS) to standardize the habitability objectives of planetary missions. These standards will help to compare and characterize potentially habitable environments, prioritize target selections, and study correlations between habitability and biosignatures. Habitability models are the foundation of planetary habitability science. The synergy between the methods used by ecologists and astrobiologists will help to integrate and expand our understanding of the habitability of Earth, the Solar System, and exoplanets. △ Less

Submitted 14 July, 2020; v1 submitted 10 July, 2020; originally announced July 2020.

Comments: White Paper for the Planetary Science and Astrobiology Decadal Survey 2023-2032

Journal ref: (2021) Bulletin of the American Astronomical Society, Vol. 53, Issue 4, e-id. 065

Habitability of the early Earth: Liquid water under a faint young Sun facilitated by strong tidal heating due to a closer Moon

Authors: René Heller, Jan-Peter Duda, Max Winkler, Joachim Reitner, Laurent Gizon

Abstract: Geological evidence suggests liquid water near the Earth's surface as early as 4.4 billion years ago when the faint young Sun only radiated about 70% of its modern power output. At this point, the Earth should have been a global snowball if it possessed atmospheric properties similar to those of the modern Earth. An extreme atmospheric greenhouse effect, an initially more massive Sun, release of h… ▽ More Geological evidence suggests liquid water near the Earth's surface as early as 4.4 billion years ago when the faint young Sun only radiated about 70% of its modern power output. At this point, the Earth should have been a global snowball if it possessed atmospheric properties similar to those of the modern Earth. An extreme atmospheric greenhouse effect, an initially more massive Sun, release of heat acquired during the accretion process of protoplanetary material, and radioactivity of the early Earth material have been proposed as reservoirs or traps for heat. For now, the faint-young-sun paradox persists as an important problem in our understanding of the origin of life on Earth. Here we use the constant-phase-lag tidal theory to explore the possibility that the new-born Moon, which formed about 69 million years after the ignition of the Sun, generated extreme tidal friction - and therefore heat - in the Hadean and possibly the Archean Earth. We show that the Earth-Moon system has lost about $3~ \times ~10^{31}$ J (99% of its initial mechanical energy budget) as tidal heat. Tidal heating of roughly 10 W/m$^{-2}$ through the surface on a time scale of 100 million years could have accounted for a temperature increase of up to 5 degrees Celsius on the early Earth. This heating effect alone does not solve the faint-young-sun paradox but it could have played a key role in combination with other effects. Future studies of the interplay of tidal heating, the evolution of the solar power output, and the atmospheric (greenhouse) effects on the early Earth could help in solving the faint-young-sun paradox. △ Less

Submitted 26 November, 2021; v1 submitted 7 July, 2020; originally announced July 2020.

Comments: published in Paläolontologische Zeitschrift, 22 pages, 5 colored Figures; free full text at Springer Nature: https://rdcu.be/cBZX5

Transit least-squares survey -- III. A $1.9\,R_\oplus$ transit candidate in the habitable zone of Kepler-160 and a nontransiting planet characterized by transit-timing variations

Authors: René Heller, Michael Hippke, Jantje Freudenthal, Kai Rodenbeck, Natalie M. Batalha, Steve Bryson

Abstract: The Sun-like star Kepler-160 (KOI-456) has been known to host two transiting planets, Kepler-160 b and c, of which planet c shows substantial transit-timing variations (TTVs). We used the archival Kepler photometry of Kepler-160 to search for additional transiting planets using a combination of our Wotan detrending algorithm and our transit least-squares (TLS) detection algorithm. We also used the… ▽ More The Sun-like star Kepler-160 (KOI-456) has been known to host two transiting planets, Kepler-160 b and c, of which planet c shows substantial transit-timing variations (TTVs). We used the archival Kepler photometry of Kepler-160 to search for additional transiting planets using a combination of our Wotan detrending algorithm and our transit least-squares (TLS) detection algorithm. We also used the Mercury N-body gravity code to study the orbital dynamics of the system. First, we recovered the known transit series of planets Kepler-160 b and c. Then we found a new transiting candidate with a radius of 1.91 (+0.17, -0.14) Earth radii (R_ear), an orbital period of 378.417 (+0.028, -0.025) d, and Earth-like insolation. The vespa software predicts that this signal has an astrophysical false-positive probability of FPP_3 = 1.8e-3 when the multiplicity of the system is taken into account. Kepler vetting diagnostics yield a multiple event statistic of MES = 10.7, which corresponds to an ~85 % reliability against false alarms due to instrumental artifacts such as rolling bands. We are also able to explain the observed TTVs of planet c with the presence of a previously unknown planet. The period and mass of this new planet, however, do not match the period and mass of the new transit candidate. Our Markov chain Monte Carlo simulations of the TTVs of Kepler-160 c can be conclusively explained by a new nontransiting planet with a mass between about 1 and 100 Earth masses and an orbital period between about 7 and 50 d. We conclude that Kepler-160 has at least three planets, one of which is the nontransiting planet Kepler-160 d. The expected stellar radial velocity amplitude caused by this new planet ranges between about 1 and 20 m/s. We also find the super-Earth-sized transiting planet candidate KOI-456.04 in the habitable zone of this system, which could be the fourth planet. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Comments: published in A&A, 15 pages, 11 Figures (7 col, 4 b/w), 2 Tables

Journal ref: Astronomy & Astrophysics, 2020, Vol. 638, id. A10

Measurements of an AC-LGAD strip sensor with a 120 GeV proton beam

Authors: Artur Apresyan, Wei Chen, Gabriele D'Amen, Karri Folan Di Petrillo, Gabriele Giacomini, Ryan Heller, Hakseong Lee, Sergey Los, Chang-Seong Moon, Alessandro Tricoli

Abstract: The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for several applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. In addition to high time resolution and thanks to the AC-coupling of the electrodes, LGAD silicon sensors can provide high reso… ▽ More The development of detectors that provide high resolution in four dimensions has attracted wide-spread interest in the scientific community for several applications in high-energy physics, nuclear physics, medical imaging, mass spectroscopy as well as quantum information. In addition to high time resolution and thanks to the AC-coupling of the electrodes, LGAD silicon sensors can provide high resolution in the measurement of spatial coordinates of an incident minimum ionizing particle. Such AC-coupled LGADs, also known as AC-LGADs, are therefore considered as candidates for future detectors to provide 4-dimensional measurements in a single sensing device with 100$\%$ fill factor. This article presents the first characterization of an AC-LGAD sensor with a proton beam of 120 GeV momentum at Fermilab. The sensor consists of strips with 80 $μ$m width, fabricated at Brookhaven National Laboratory. The signal properties, efficiency, spatial, and time resolution are presented. The experimental results show that the time resolution of such an AC-LGAD is compatible to standard LGADs with similar gain, and that AC-LGADs can be segmented with fine pitches as standard strip or pixel detectors. △ Less

Submitted 6 November, 2020; v1 submitted 2 June, 2020; originally announced June 2020.

Journal ref: JINST 15 P09038 (2020)

A possible transit of a disintegrating exoplanet in the nearby multiplanet system DMPP-1

Authors: Mark H. Jones, Carole A. Haswell, John R. Barnes, Daniel Staab, René Heller

Abstract: We analyse TESS photometry of DMPP-1 (HD 38677; TIC 66560666), a nearby F8V star hosting hot super-Earth planets and a warm Neptune. Using the Transit Least Squares algorithm and other methods we find a transit signal at $P=3.2854^{+0.0032}_{-0.0025}$ d with depth 87$^{+25}_{-30}$ ppm and false alarm probability 1.6%. This is shallower than hitherto published TESS discoveries. The 3.285 d signal i… ▽ More We analyse TESS photometry of DMPP-1 (HD 38677; TIC 66560666), a nearby F8V star hosting hot super-Earth planets and a warm Neptune. Using the Transit Least Squares algorithm and other methods we find a transit signal at $P=3.2854^{+0.0032}_{-0.0025}$ d with depth 87$^{+25}_{-30}$ ppm and false alarm probability 1.6%. This is shallower than hitherto published TESS discoveries. The 3.285 d signal is recovered for several, but not all, methods for detrending stellar astrophysical variability. Further observations are needed to improve the significance of the detection. If this transit were due to an Earth-like rocky planet it would have been detected in the RV data, but it is not. The TESS data cover seven individual transits, one of which is consistent with zero depth. The insolation of the putative planet is $990 {\rm S_{\oplus}}$, typical of fluxes experienced by the three known catastrophically disintegrating exoplanets (CDEs). The transits can be self-consistently attributed to a CDE with a mass below the RV detection threshold. We searched for transits of the known RV planets, finding null results and detection thresholds of $< 100$ ppm, which we quantify for each. The DMPP-1 planetary system was discovered as a consequence of circumstellar gas attributed to ablation of hot planets. The RV planets may have been ablated to near-pure iron cores. We place limits on the orbital inclinations of the RV planets where the expected transit depth exceeds the detection threshold. If the 3.2854 day transit detection is confirmed, e.g. with CHEOPS photometry, DMPP-1 would be a first-rate target for JWST spectroscopy. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: Accepted for publication in ApJL

Search for millicharged particles in proton-proton collisions at $\sqrt{s} = 13$ TeV

Authors: A. Ball, G. Beauregard, J. Brooke, C. Campagnari, M. Carrigan, M. Citron, J. De La Haye, A. De Roeck, Y. Elskens, R. Escobar Franco, M. Ezeldine, B. Francis, M. Gastal, M. Ghimire, J. Goldstein, F. Golf, J. Guiang, A. Haas, R. Heller, C. S. Hill, L. Lavezzo, R. Loos, S. Lowette, G. Magill, B. Manley , et al. (13 additional authors not shown)

Abstract: We report on a search for elementary particles with charges much smaller than the electron charge using a data sample of proton-proton collisions provided by the CERN Large Hadron Collider in 2018, corresponding to an integrated luminosity of 37.5 fb$^{-1}$ at a center-of-mass energy of 13 TeV. A prototype scintillator-based detector is deployed to conduct the first search at a hadron collider sen… ▽ More We report on a search for elementary particles with charges much smaller than the electron charge using a data sample of proton-proton collisions provided by the CERN Large Hadron Collider in 2018, corresponding to an integrated luminosity of 37.5 fb$^{-1}$ at a center-of-mass energy of 13 TeV. A prototype scintillator-based detector is deployed to conduct the first search at a hadron collider sensitive to particles with charges ${\leq}0.1e$. The existence of new particles with masses between 20 and 4700 MeV is excluded at 95% confidence level for charges between $0.006e$ and $0.3e$, depending on their mass. New sensitivity is achieved for masses larger than $700$ MeV. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Report number: CERN-EP-2020-072

Journal ref: Phys. Rev. D 102, 032002 (2020)

Semiclassical instanton formulation of Marcus-Levich-Jortner theory

Authors: Eric R. Heller, Jeremy O. Richardson

Abstract: Marcus-Levich-Jortner (MLJ) theory is one of the most commonly used methods for including nuclear quantum effects into the calculation of electron-transfer rates and for interpreting experimental data. It divides the molecular problem into a subsystem treated quantum-mechanically by Fermi's golden rule and a solvent bath treated by classical Marcus theory. As an extension of this idea, we here pre… ▽ More Marcus-Levich-Jortner (MLJ) theory is one of the most commonly used methods for including nuclear quantum effects into the calculation of electron-transfer rates and for interpreting experimental data. It divides the molecular problem into a subsystem treated quantum-mechanically by Fermi's golden rule and a solvent bath treated by classical Marcus theory. As an extension of this idea, we here present a "reduced" semiclassical instanton theory, which is a multiscale method for simulating quantum tunnelling of the subsystem in molecular detail in the presence of a harmonic bath. We demonstrate that instanton theory is typically significantly more accurate than the cumulant expansion or the semiclassical Franck-Condon sum, which can give orders-of-magnitude errors and in general do not obey detailed balance. As opposed to MLJ theory, which is based on wavefunctions, instanton theory is based on path integrals and thus does not require solutions of the Schrödinger equation, nor even global knowledge of the ground- and excited-state potentials within the subsystem. It can thus be efficiently applied to complex, anharmonic multidimensional subsystems without making further approximations. In addition to predicting accurate rates, instanton theory gives a high level of insight into the reaction mechanism by locating the dominant tunnelling pathway as well as providing information on the reactant and product vibrational states involved in the reaction and the activation energy in the bath similarly to what would be found with MLJ theory. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Comments: 21 pages, 4 figures

Journal ref: J. Chem. Phys. 152, 244117 (2020)

Habitability is a continuous property of nature

Authors: René Heller

Abstract: In their recent comment, Cockell et al. argue that the habitability of an environment is fundamentally a binary property; that is to say, an environment can either support the metabolic processes of a given organism or not. The habitability of different environments, they argue, may have different degrees that could be determined at least in theory by answering the question: 'is this environment h… ▽ More In their recent comment, Cockell et al. argue that the habitability of an environment is fundamentally a binary property; that is to say, an environment can either support the metabolic processes of a given organism or not. The habitability of different environments, they argue, may have different degrees that could be determined at least in theory by answering the question: 'is this environment habitable to a given organism?' 'More' or 'less' habitable environments could then be related by the number of yes or no answers given to what is fundamentally a series of binary questions and decisions. In my opinion, there are at least three implicit assumptions made for this line of reasoning that are implausible and that sabotage the conclusions. The first is in the genetic diversity of the organisms, which I argue is fundamentally continuous in nature and a binary construction of the sample is not meaningful. The second misconception is in the assumption that an ecosystem can be decomposed into subsets of independent samples. The third problem is in the definition of an environment. The question of the environment is a continuous one in both space and time and thus any concept constructed to be applicable to a sample of environments must be continuous as well. In summary, the question of whether habitability is a binary quantity or not brings us back to the question of whether our concepts of life and of the environments that life thrives in (or not) are binary or non-binary. I argue that the latter is the case, and hence any modern concept of habitability must be continuous too. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Comments: 1 col. figure

Journal ref: Nature Astronomy, 2020, Vol. 4, Issue 4, pp. 294-295