-
Superconducting transition detector in power amplification mode: a tool for cryogenic multiplexing
Authors:
P. Helistö,
J. Hassel,
A. Luukanen,
H. Seppä
Abstract:
We demonstrate that substantial power gain can be obtained with superconducting transition detectors. We describe the properties of the detector as a power amplifier theoretically. In our first experiments power gain of 23 was reached in a good agreement with the theory. The gain facilitates noise matching of the readout circuit to the detectors in the case of time division multiplexing.
We demonstrate that substantial power gain can be obtained with superconducting transition detectors. We describe the properties of the detector as a power amplifier theoretically. In our first experiments power gain of 23 was reached in a good agreement with the theory. The gain facilitates noise matching of the readout circuit to the detectors in the case of time division multiplexing.
△ Less
Submitted 17 June, 2008;
originally announced June 2008.
-
Ultrasensitive Proximity Josephson Sensor with Kinetic Inductance Read-Out
Authors:
F. Giazotto,
T. T. Heikkila,
G. Pepe. P. Helisto,
A. Luukanen,
J. P. Pekola
Abstract:
We propose a mesoscopic kinetic-inductance radiation detector based on a long superconductor--normal metal--superconductor Josephson junction. The operation of this proximity Josephson sensor (PJS) relies on large kinetic inductance variations under irradiation due to the exponential temperature dependence of the critical current. Coupled with a dc SQUID readout, the PJS is able to provide a sig…
▽ More
We propose a mesoscopic kinetic-inductance radiation detector based on a long superconductor--normal metal--superconductor Josephson junction. The operation of this proximity Josephson sensor (PJS) relies on large kinetic inductance variations under irradiation due to the exponential temperature dependence of the critical current. Coupled with a dc SQUID readout, the PJS is able to provide a signal to noise (S/N) ratio up to ~10^3 in the THz regime if operated as calorimeter, while electrical noise equivalent power (NEP) as low as ~7x10^{-20} W(Hz)^(-1/2) at 200 mK can be achieved in the bolometer operation. The high performance together with the ease of fabrication make this structure attractive as an ultrasensitive cryogenic detector of THz electromagnetic radiation.
△ Less
Submitted 18 February, 2008;
originally announced February 2008.
-
Verification of stable operation of rapid single flux quantum devices with selective dissipation
Authors:
J. Hassel,
L. Gronberg,
P. Helisto
Abstract:
It has been suggested that Rapid Single Flux Quantum (RSFQ) devices could be used as the classical interface of superconducting qubit systems. One problem is that the interface acts as a dissipative environment for a qubit. Recently ways to modify the RSFQ dam** to reduce the dissipation have been introduced. One of the solutions is to damp the Josephson junctions by a frequency-dependent line…
▽ More
It has been suggested that Rapid Single Flux Quantum (RSFQ) devices could be used as the classical interface of superconducting qubit systems. One problem is that the interface acts as a dissipative environment for a qubit. Recently ways to modify the RSFQ dam** to reduce the dissipation have been introduced. One of the solutions is to damp the Josephson junctions by a frequency-dependent linear circuit instead of the plain resistor. The approach has previously been experimentally tested with a simple SFQ comparator. In this paper we perform experiments with a full RSFQ circuit, and thus conclude that in terms of stable operation the approach is applicable for scalable RSFQ circuits. Realisation and optimisation issues are also discussed.
△ Less
Submitted 5 February, 2007;
originally announced February 2007.
-
High resolution superconducting single flux quantum comparator for sub kelvin temperatures
Authors:
A. M. Savin,
J. P. Pekola,
T. Holmqvist,
J. Hassel,
L. Grönberg,
P. Helistö,
A. Kidiyarova-Shevchenko
Abstract:
A design of subkelvin single flux quantum (SFQ) circuits with reduced power dissipation and additional cooling of shunt resistors for superconducting qubit control circuits has been developed and characterized. We demonstrate operation of SFQ comparators with current resolution of 40 nA at 2 GHz sampling rate. Due to improved cooling the electron temperature in shunt resistors of a SFQ comparato…
▽ More
A design of subkelvin single flux quantum (SFQ) circuits with reduced power dissipation and additional cooling of shunt resistors for superconducting qubit control circuits has been developed and characterized. We demonstrate operation of SFQ comparators with current resolution of 40 nA at 2 GHz sampling rate. Due to improved cooling the electron temperature in shunt resistors of a SFQ comparator is below 50 mK when the bath temperature is about 30 mK.
△ Less
Submitted 29 June, 2006;
originally announced June 2006.
-
Description of self-synchronization effects in distributed Josephson junction arrays using harmonic analysis and power balance
Authors:
J. Hassel,
L. Gronberg,
P. Helisto,
H. Seppa
Abstract:
Power generation and synchronisation in Josephson junction arrays have attracted attention for a long time. This stems from fundamental interest in nonlinear coupled systems as well as from potential in practical applications. In this paper we study the case of an array of junctions coupled to a distributed transmission line either driven by an external microwave or in a self-oscillating mode. W…
▽ More
Power generation and synchronisation in Josephson junction arrays have attracted attention for a long time. This stems from fundamental interest in nonlinear coupled systems as well as from potential in practical applications. In this paper we study the case of an array of junctions coupled to a distributed transmission line either driven by an external microwave or in a self-oscillating mode. We simplify the theoretical treatment in terms of harmonic analysis and power balance. We apply the model to explain the large operation margins of SNS- and SINIS-junction arrays. We show the validity of the approach by comparing with experiments and simulations with self-oscillating es-SIS junction arrays.
△ Less
Submitted 19 May, 2006;
originally announced May 2006.
-
Characterization of a fabrication process for the integration of superconducting qubits and RSFQ circuits
Authors:
Maria Gabriella Castellano,
Leif Gronberg,
Pasquale Carelli,
Fabio Chiarello,
Carlo Cosmelli,
Roberto Leoni,
Stefano Poletto,
Guido Torrioli,
Juha Hassel,
Panu Helisto
Abstract:
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low…
▽ More
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low dissipated power on the RSFQ side. For this purpose, VTT has developed a fabrication process based on Nb trilayer technology, which allows the on-chip integration of superconducting qubits and RSFQ circuits even at very low temperature. Here we present the characterization (at 4.2 K) of the process from the point of view of the Josephson devices and show that they are suitable to build integrated superconducting qubits.
△ Less
Submitted 24 April, 2006;
originally announced April 2006.
-
RSFQ devices with selective dissipation for quantum information processing
Authors:
J. Hassel,
H. Seppa,
P. Helisto
Abstract:
We study the possibility to use frequency dependent dam** in RSFQ circuits as means to reduce dissipation and consequent decoherence in RSFQ/qubit circuits. We show that stable RSFQ operation can be achieved by shunting the Josephson junctions with an $RC$ circuit instead of a plain resistor. We derive criteria for the stability of such an arrangement, and discuss the effect on decoherence and…
▽ More
We study the possibility to use frequency dependent dam** in RSFQ circuits as means to reduce dissipation and consequent decoherence in RSFQ/qubit circuits. We show that stable RSFQ operation can be achieved by shunting the Josephson junctions with an $RC$ circuit instead of a plain resistor. We derive criteria for the stability of such an arrangement, and discuss the effect on decoherence and the optimisation issues. We also design a simple flux generator aimed at manipulating flux qubits.
△ Less
Submitted 7 October, 2005;
originally announced October 2005.