Showing 1–45 of 45 results for author: Heintz, U

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

A novel internship program in HEP

Authors: Santanu Banerjee, Tulika Bose, Ulrich Heintz, Sudhir Malik

Abstract: The U.S. CMS collaboration has designed a novel internship program for undergraduates to enhance the participation of students from under-represented populations, including those at minority serving institutions, in High Energy Physics (HEP). These students traditionally face several barriers including lack of research infrastructure and opportunities, insufficient mentoring, lack of support netwo… ▽ More The U.S. CMS collaboration has designed a novel internship program for undergraduates to enhance the participation of students from under-represented populations, including those at minority serving institutions, in High Energy Physics (HEP). These students traditionally face several barriers including lack of research infrastructure and opportunities, insufficient mentoring, lack of support networks, and financial hardship, among many others, resulting in a lack of participation in STEM fields. We had recently reported about a fully virtual 10-week internship pilot program called "U.S. CMS - PURSUE (Program for Undergraduate Research SUmmer Experience)" to address dismantling such barriers. The 2023 iteration of this program builds on it by imparting not only an in-person summer internship experience but extends it into the academic semester as well. Students are selected predominantly from Minority Serving Institutions with no research program in HEP and from under-represented groups. They experience a structured hands-on research experience with an initial two-week "bootcamp" on software training modules followed by an 8-week HEP project targeting physics analysis, software, computing or instrumentation work on the CMS Experiment. A subset of interns continue the experience into the academic semester, enabling a further in-depth knowledge of the field and a motivation to persist in STEM areas. In this paper, we describe our recent experience with this upgraded internship program. The paper is dedicated to the memory of Prof. Meenakshi Narain (Brown University) who was the driving force behind this internship program and U.S CMS diversity, equity and inclusion efforts. △ Less

Submitted 1 February, 2024; v1 submitted 1 January, 2024; originally announced January 2024.

Modeling of Surface Damage at the Si/SiO$_2$-interface of Irradiated MOS-capacitors

Authors: N. Akchurin, G. Altopp, B. Burkle, W. D. Frey, U. Heintz, N. Hinton, M. Hoeferkamp, Y. Kazhykarim, V. Kuryatkov, T. Mengke, T. Peltola, S. Seidel, E. Spencer, M. Tripathi, J. Voelker

Abstract: Surface damage caused by ionizing radiation in SiO$_2$ passivated silicon particle detectors consists mainly of the accumulation of a positively charged layer along with trapped-oxide-charge and interface traps inside the oxide and close to the Si/SiO$_2$-interface. High density positive interface net charge can be detrimental to the operation of a multi-channel $n$-on-$p$ sensor since the inversi… ▽ More Surface damage caused by ionizing radiation in SiO$_2$ passivated silicon particle detectors consists mainly of the accumulation of a positively charged layer along with trapped-oxide-charge and interface traps inside the oxide and close to the Si/SiO$_2$-interface. High density positive interface net charge can be detrimental to the operation of a multi-channel $n$-on-$p$ sensor since the inversion layer generated under the Si/SiO$_2$-interface can cause loss of position resolution by creating a conduction channel between the electrodes. In the investigation of the radiation-induced accumulation of oxide charge and interface traps, a capacitance-voltage characterization study of n/$γ$- and $γ$-irradiated Metal-Oxide-Semiconductor (MOS) capacitors showed that close agreement between measurement and simulation were possible when oxide charge density was complemented by both acceptor- and donor-type deep interface traps with densities comparable to the oxide charges. Corresponding inter-strip resistance simulations of a $n$-on-$p$ sensor with the tuned oxide charge density and interface traps show close agreement with experimental results. The beneficial impact of radiation-induced accumulation of deep interface traps on inter-electrode isolation may be considered in the optimization of the processing parameters of isolation implants on $n$-on-$p$ sensors for the extreme radiation environments. △ Less

Submitted 1 August, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: Corresponding author: T. Peltola. 24 pages, 17 figures, 6 tables

Report number: APDL-2023-001

Journal ref: JINST 18 P08001 (2023)

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Report of the Topical Group on Higgs Physics for Snowmass 2021: The Case for Precision Higgs Physics

Authors: Sally Dawson, Patrick Meade, Isobel Ojalvo, Caterina Vernieri, S. Adhikari, F. Abu-Ajamieh, A. Alberta, H. Bahl, R. Barman, M. Basso, A. Beniwal, I. Bozovi-Jelisav, S. Bright-Thonney, V. Cairo, F. Celiberto, S. Chang, M. Chen, C. Damerell, J. Davis, J. de Blas, W. Dekens, J. Duarte, D. Egana-Ugrinovic, U. Einhaus, Y. Gao , et al. (56 additional authors not shown)

Abstract: A future Higgs Factory will provide improved precision on measurements of Higgs couplings beyond those obtained by the LHC, and will enable a broad range of investigations across the fields of fundamental physics, including the mechanism of electroweak symmetry breaking, the origin of the masses and mixing of fundamental particles, the predominance of matter over antimatter, and the nature of dark… ▽ More A future Higgs Factory will provide improved precision on measurements of Higgs couplings beyond those obtained by the LHC, and will enable a broad range of investigations across the fields of fundamental physics, including the mechanism of electroweak symmetry breaking, the origin of the masses and mixing of fundamental particles, the predominance of matter over antimatter, and the nature of dark matter. Future colliders will measure Higgs couplings to a few per cent, giving a window to beyond the Standard Model (BSM) physics in the 1-10 TeV range. In addition, they will make precise measurements of the Higgs width, and characterize the Higgs self-coupling. This report details the work of the EF01 and EF02 working groups for the Snowmass 2021 study. △ Less

Submitted 20 December, 2022; v1 submitted 15 September, 2022; originally announced September 2022.

Comments: 44 pages, 40 figures, Report of the Topical Group on Higgs Physics for Snowmass 2021. The first four authors are the Conveners, with Contributions from the other authors

Report of the Snowmass 2021 e$^+$e$^-$-Collider Forum

Authors: Maria Chamizo Llatas, Sridhara Dasu, Ulrich Heintz, Emilio A. Nanni, John Power, Stephen Wagner

Abstract: A summary of the Snowmass 2021 e$^+$e$^-$-Collider Forum discussions, white papers submitted to the Snowmass 2021 community study, submissions of the Energy Frontier (EF) subgroups and the Accelerator Frontier (AF) Integrated Task Force (ITF) are presented. A summary of the Snowmass 2021 e$^+$e$^-$-Collider Forum discussions, white papers submitted to the Snowmass 2021 community study, submissions of the Energy Frontier (EF) subgroups and the Accelerator Frontier (AF) Integrated Task Force (ITF) are presented. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Strange quark as a probe for new physics in the Higgs sector

Authors: Alexander Albert, Matthew J. Basso, Samuel K. Bright-Thonney, Valentina M. M. Cairo, Chris Damerell, Daniel Egana-Ugrinovic, Ulrich Einhaus, Ulrich Heintz, Samuel Homiller, Shin-ichi Kawada, **gyu Luo, Chester Mantel, Patrick Meade, Jose Monroy, Meenakshi Narain, Robert S. Orr, Joseph Reichert, Anders Ryd, Jan Strube, Dong Su, Ariel G. Schwartzman, Tomohiko Tanabe, Jun** Tian, Emanuele Usai, Jerry Va'vra , et al. (3 additional authors not shown)

Abstract: This paper describes a novel algorithm for tagging jets originating from the hadronisation of strange quarks (strange-tagging) with the future International Large Detector (ILD) at the International Linear Collider (ILC). It also presents the first application of such a strange-tagger to a Higgs to strange ($h \rightarrow s\bar{s}$) analysis with the $P(e^-,e^+) = (-80\%,+30\%)$ polarisation scena… ▽ More This paper describes a novel algorithm for tagging jets originating from the hadronisation of strange quarks (strange-tagging) with the future International Large Detector (ILD) at the International Linear Collider (ILC). It also presents the first application of such a strange-tagger to a Higgs to strange ($h \rightarrow s\bar{s}$) analysis with the $P(e^-,e^+) = (-80\%,+30\%)$ polarisation scenario, corresponding to 900 fb$^{-1}$ of the initial proposed 2000 fb$^{-1}$ of data which will be collected by ILD during its first 10 years of data taking at $\sqrt{s} = 250$ GeV. Upper limits on the Standard Model Higgs-strange coupling strength modifier, $κ_s$, are derived at the 95% confidence level to be 7.14. The paper includes as well a preliminary study of a Ring Imaging Cherenkov (RICH) system capable of discriminating between kaons and pions at high momenta (up to 25 GeV), and thus enhancing strange-tagging performance at future Higgs factory detectors. △ Less

Submitted 6 July, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: V1: 69 pages; V2: 80 pages, updated figures/numbers, additional appendices

Report number: Report-no: ILD-PHYS-PROC-2022-001

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

End-to-End Jet Classification of Boosted Top Quarks with the CMS Open Data

Authors: Michael Andrews, Bjorn Burkle, Yi-fan Chen, Davide DiCroce, Sergei Gleyzer, Ulrich Heintz, Meenakshi Narain, Manfred Paulini, Nikolas Pervan, Yusef Shafi, Wei Sun, Emanuele Usai, Kun Yang

Abstract: We describe a novel application of the end-to-end deep learning technique to the task of discriminating top quark-initiated jets from those originating from the hadronization of a light quark or a gluon. The end-to-end deep learning technique combines deep learning algorithms and low-level detector representation of the high-energy collision event. In this study, we use low-level detector informat… ▽ More We describe a novel application of the end-to-end deep learning technique to the task of discriminating top quark-initiated jets from those originating from the hadronization of a light quark or a gluon. The end-to-end deep learning technique combines deep learning algorithms and low-level detector representation of the high-energy collision event. In this study, we use low-level detector information from the simulated CMS Open Data samples to construct the top jet classifiers. To optimize classifier performance we progressively add low-level information from the CMS tracking detector, including pixel detector reconstructed hits and impact parameters, and demonstrate the value of additional tracking information even when no new spatial structures are added. Relying only on calorimeter energy deposits and reconstructed pixel detector hits, the end-to-end classifier achieves an AUC score of 0.975$\pm$0.002 for the task of classifying boosted top quark jets. After adding derived track quantities, the classifier AUC score increases to 0.9824$\pm$0.0013, serving as the first performance benchmark for these CMS Open Data samples. We additionally provide a timing performance comparison of different processor unit architectures for training the network. △ Less

Submitted 21 January, 2022; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: 9 pages, 3 figures, 4 tables; v3: unpublished

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

Comparison of $pp$ and $p \bar{p}$ differential elastic cross sections and observation of the exchange of a colorless $C$-odd gluonic compound

Authors: V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, J. P. Agnew, G. D. Alexeev, G. Alkhazov, A. Alton, G. A. Alves, G. Antchev, A. Askew, P. Aspell, A. C. S. Assis Jesus, I. Atanassov, S. Atkins, K. Augsten, V. Aushev, Y. Aushev, V. Avati, C. Avila, F. Badaud, J. Baechler, L. Bagby, C. Baldenegro Barrera , et al. (451 additional authors not shown)

Abstract: We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement… ▽ More We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the $pp$ cross section. The two data sets disagree at the 3.4$σ$ level and thus provide evidence for the $t$-channel exchange of a colorless, $C$-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same $C$-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in $pp$ scattering. The combined significance of these results is larger than 5$σ$ and is interpreted as the first observation of the exchange of a colorless, $C$-odd gluonic compound. △ Less

Submitted 25 June, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Comments: D0 and TOTEM Collaborations

Journal ref: Phys. Rev. Lett. 127, 062003 (2021)

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

200 mm Sensor Development Using Bonded Wafers

Authors: M. Alyari, R. Bradford, M. Campanella, P. Camporeale, R. Demina, J. Everts, Z. Gecse, R. Halenza, U. Heintz, S. Holland, S. Hong, S. Korjenevski, A. Lampis, R. Lipton, R. Patti, J. Segal, K. W. Shin

Abstract: Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to $\> 200\ m^2$ for the existing CMS tracker. High Luminosity Large Hadron Collider (HL-LHC), CMS and ATLAS tracker upgrades will each require more than $200\ m^2$ of silicon and the CMS Hi… ▽ More Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to $\> 200\ m^2$ for the existing CMS tracker. High Luminosity Large Hadron Collider (HL-LHC), CMS and ATLAS tracker upgrades will each require more than $200\ m^2$ of silicon and the CMS High Granularity Calorimeter (HGCAL) will require more than $600\ m^2$. The cost and complexity of assembly of these devices is related to the area of each module, which in turn is set by the size of the silicon sensors. In addition to large area, the devices must be radiation hard, which requires the use of sensors thinned to 200 microns or less. The combination of wafer thinning and large wafer diameter is a significant technical challenge, and is the subject of this work. We describe work on development of thin sensors on $200 mm$ wafers using wafer bonding technology. Results of development runs with float zone, Silicon-on-Insulator and Silicon-Silicon bonded wafer technologies are reported. △ Less

Submitted 2 September, 2020; v1 submitted 8 June, 2020; originally announced June 2020.

Comments: 11 pages

Report number: FERMILAB-PUB-20-223-CMS-E

Charge Collection and Electrical Characterization of Neutron Irradiated Silicon Pad Detectors for the CMS High Granularity Calorimeter

Authors: N. Akchurin, P. Almeida, G. Altopp, M. Alyari, T. Bergauer, E. Brondolin, B. Burkle, W. D. Frey, Z. Gecse, U. Heintz, N. Hinton, V. Kuryatkov, R. Lipton, M. Mannelli, T. Mengke, P. Paulitsch, T. Peltola, F. Pitters, E. Sicking, E. Spencer, M. Tripathi, M. Vicente Barreto Pinto, J. Voelker, Z. Wang, R. Yohay

Abstract: The replacement of the existing endcap calorimeter in the Compact Muon Solenoid (CMS) detector for the high-luminosity LHC (HL-LHC), scheduled for 2027, will be a high granularity calorimeter. It will provide detailed position, energy, and timing information on electromagnetic and hadronic showers in the immense pileup of the HL-LHC. The High Granularity Calorimeter (HGCAL) will use 120-, 200-, an… ▽ More The replacement of the existing endcap calorimeter in the Compact Muon Solenoid (CMS) detector for the high-luminosity LHC (HL-LHC), scheduled for 2027, will be a high granularity calorimeter. It will provide detailed position, energy, and timing information on electromagnetic and hadronic showers in the immense pileup of the HL-LHC. The High Granularity Calorimeter (HGCAL) will use 120-, 200-, and 300-$μ\textrm{m}$ thick silicon (Si) pad sensors as the main active material and will sustain 1-MeV neutron equivalent fluences up to about $10^{16}~\textrm{n}_\textrm{eq}\textrm{cm}^{-2}$. In order to address the performance degradation of the Si detectors caused by the intense radiation environment, irradiation campaigns of test diode samples from 8-inch and 6-inch wafers were performed in two reactors. Characterization of the electrical and charge collection properties after irradiation involved both bulk polarities for the three sensor thicknesses. Since the Si sensors will be operated at -30 $^\circ$C to reduce increasing bulk leakage current with fluence, the charge collection investigation of 30 irradiated samples was carried out with the infrared-TCT setup at -30 $^\circ$C. TCAD simulation results at the lower fluences are in close agreement with the experimental results and provide predictions of sensor performance for the lower fluence regions not covered by the experimental study. All investigated sensors display 60$\%$ or higher charge collection efficiency at their respective highest lifetime fluences when operated at 800 V, and display above 90$\%$ at the lowest fluence, at 600 V. The collected charge close to the fluence of $10^{16}~\textrm{n}_\textrm{eq}\textrm{cm}^{-2}$ exceeds 1 fC at voltages beyond 800 V. △ Less

Submitted 4 August, 2020; v1 submitted 16 May, 2020; originally announced May 2020.

Comments: 36 pages, 34 figures

End-to-end particle and event identification at the Large Hadron Collider with CMS Open Data

Authors: John Alison, Sitong An, Michael Andrews, Patrick Bryant, Bjorn Burkle, Sergei Gleyzer, Ulrich Heintz, Meenakshi Narain, Manfred Paulini, Barnabas Poczos, Emanuele Usai

Abstract: From particle identification to the discovery of the Higgs boson, deep learning algorithms have become an increasingly important tool for data analysis at the Large Hadron Collider (LHC). We present an innovative end-to-end deep learning approach for jet identification at the Compact Muon Solenoid (CMS) experiment at the LHC. The method combines deep neural networks with low-level detector informa… ▽ More From particle identification to the discovery of the Higgs boson, deep learning algorithms have become an increasingly important tool for data analysis at the Large Hadron Collider (LHC). We present an innovative end-to-end deep learning approach for jet identification at the Compact Muon Solenoid (CMS) experiment at the LHC. The method combines deep neural networks with low-level detector information, such as calorimeter energy deposits and tracking information, to build a discriminator to identify different particle species. Using two physics examples as references: electron vs. photon discrimination and quark vs. gluon discrimination, we demonstrate the performance of the end-to-end approach on simulated events with full detector geometry as available in the CMS Open Data. We also offer insights into the importance of the information extracted from various sub-detectors and describe how end-to-end techniques can be extended to event-level classification using information from the whole CMS detector. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Comments: Talk presented at the 2019 Meeting of the Division of Particles and Fields of the American Physical Society (DPF2019), July 29 - August 2, 2019, Northeastern University, Boston, C1907293

New Technologies for Discovery

Authors: Z. Ahmed, A. Apresyan, M. Artuso, P. Barry, E. Bielejec, F. Blaszczyk, T. Bose, D. Braga, S. A. Charlebois, A. Chatterjee, A. Chavarria, H. -M. Cho, S. Dalla Torre, M. Demarteau, D. Denisov, M. Diefenthaler, A. Dragone, F. Fahim, C. Gee, S. Habib, G. Haller, J. Hogan, B. J. P. Jones, M. Garcia-Sciveres, G. Giacomini , et al. (58 additional authors not shown)

Abstract: For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by hi… ▽ More For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by high energy physics have never been more compelling, there is acute awareness of the challenging budgetary and technical constraints when scaling current technologies. Furthermore, many technologies are reaching their sensitivity limit and new approaches need to be developed to overcome the currently irreducible technological challenges. This situation is unfolding against a backdrop of declining funding for instrumentation, both at the national laboratories and in particular at the universities. This trend has to be reversed for the country to continue to play a leadership role in particle physics, especially in this most promising era of imminent new discoveries that could finally break the hugely successful, but limited, Standard Model of fundamental particle interactions. In this challenging environment it is essential that the community invest anew in instrumentation and optimize the use of the available resources to develop new innovative, cost-effective instrumentation, as this is our best hope to successfully accomplish the mission of high energy physics. This report summarizes the current status of instrumentation for high energy physics, the challenges and needs of future experiments and indicates high priority research areas. △ Less

Submitted 10 August, 2019; v1 submitted 31 July, 2019; originally announced August 2019.

Comments: A report of the 2018 DPF Coordinating Panel for Advanced Detectors (CPAD) Community Workshop (101 pages)

Beyond the Standard Model Physics at the HL-LHC and HE-LHC

Authors: X. Cid Vidal, M. D'Onofrio, P. J. Fox, R. Torre, K. A. Ulmer, A. Aboubrahim, A. Albert, J. Alimena, B. C. Allanach, C. Alpigiani, M. Altakach, S. Amoroso, J. K. Anders, J. Y. Araz, A. Arbey, P. Azzi, I. Babounikau, H. Baer, M. J. Baker, D. Barducci, V. Barger, O. Baron, L. Barranco Navarro, M. Battaglia, A. Bay , et al. (272 additional authors not shown)

Abstract: This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu… ▽ More This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics. △ Less

Submitted 13 August, 2019; v1 submitted 19 December, 2018; originally announced December 2018.

Comments: Report from Working Group 3 on the Physics of the HL-LHC, and Perspectives at the HE-LHC; v2: final version updated with the latest contributions and summaries; 239 pages + refs; v3: typos and character misprint in Fig. 7.2 fixed; v4: added one missing author

Report number: CERN-LPCC-2018-05

Machine Learning in High Energy Physics Community White Paper

Authors: Kim Albertsson, Piero Altoe, Dustin Anderson, John Anderson, Michael Andrews, Juan Pedro Araque Espinosa, Adam Aurisano, Laurent Basara, Adrian Bevan, Wahid Bhimji, Daniele Bonacorsi, Bjorn Burkle, Paolo Calafiura, Mario Campanelli, Louis Capps, Federico Carminati, Stefano Carrazza, Yi-fan Chen, Taylor Childers, Yann Coadou, Elias Coniavitis, Kyle Cranmer, Claire David, Douglas Davis, Andrea De Simone , et al. (103 additional authors not shown)

Abstract: Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We d… ▽ More Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit. △ Less

Submitted 16 May, 2019; v1 submitted 8 July, 2018; originally announced July 2018.

Comments: Editors: Sergei Gleyzer, Paul Seyfert and Steven Schramm

Production of exotic composite quarks at the LHC

Authors: O. Panella, R. Leonardi, G. Pancheri, Y. N. Srivastava, M. Narain, U. Heintz

Abstract: We consider the production at the LHC of exotic composite quarks of charge $Q=+(5/3) e$ and $Q=-(4/3) e$. Such states are predicted in composite models of higher isospin multiplets ($I_W=1$ or $I_W=3/2$). Given their exotic charges (such as $5/3$), their decays proceed through the electroweak interactions. We compute decay widths and rates for resonant production of the exotic quarks at the LHC. P… ▽ More We consider the production at the LHC of exotic composite quarks of charge $Q=+(5/3) e$ and $Q=-(4/3) e$. Such states are predicted in composite models of higher isospin multiplets ($I_W=1$ or $I_W=3/2$). Given their exotic charges (such as $5/3$), their decays proceed through the electroweak interactions. We compute decay widths and rates for resonant production of the exotic quarks at the LHC. Partly motivated by the recent observation of an excess by the CMS collaboration in the $e\not p_T jj$ final state signature we focus on $ pp \to U^+ j \to W^+ + j\, j\, \to \ell^+\not p_T jj$ and then perform a fast simulation of the detector reconstruction based on DELPHES. We then scan the parameter space of the model ($m_*=Λ$) and study the statistical significance of the signal against the relevant standard model background ($Wjj$ followed by leptonic decay of the $W$ gauge boson) providing the luminosity curves as function of $m_*$ for discovery at 3- and 5-$σ$ level. △ Less

Submitted 20 March, 2017; originally announced March 2017.

Comments: 14 pages, 10 figures

Journal ref: Phys. Rev. D 96, 075034 (2017)

Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker

Authors: W. Adam, T. Bergauer, M. Dragicevic, M. Friedl, R. Fruehwirth, M. Hoch, J. Hrubec, M. Krammer, W. Treberspurg, W. Waltenberger, S. Alderweireldt, W. Beaumont, X. Janssen, S. Luyckx, P. Van Mechelen, N. Van Remortel, A. Van Spilbeeck, P. Barria, C. Caillol, B. Clerbaux, G. De Lentdecker, D. Dobur, L. Favart, A. Grebenyuk, Th. Lenzi , et al. (663 additional authors not shown)

Abstract: The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi… ▽ More The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Journal ref: 2016 JINST 11 P04023

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

Snowmass 2013 Top quark working group report

Authors: K. Agashe, R. Erbacher, C. E. Gerber, K. Melnikov, R. Schwienhorst, A. Mitov, M. Vos, S. Wimpenny, J. Adelman, M. Baumgart, A. Garcia-Bellido, A. Loginov, A. Jung, M. Schulze, J. Shelton, N. Craig, M. Velasco, T. Golling, J. Hubisz, A. Ivanov, M. Perelstein, S. Chekanov, J. Dolen, J. Pilot, R. Pöschl , et al. (145 additional authors not shown)

Abstract: This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass). This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass). △ Less

Submitted 8 November, 2013; originally announced November 2013.

New Particles Working Group Report of the Snowmass 2013 Community Summer Study

Authors: Y. Gershtein, M. Luty, M. Narain, L. -T. Wang, D. Whiteson, K. Agashe, L. Apanasevich, G. Artoni, A. Avetisyan, H. Baer, C. Bartels, M. Bauer, D. Berge, M. Berggren, S. Bhattacharya, K. Black, T. Bose, J. Brau, R. Brock, E. Brownson, M. Cahill-Rowley, A. Cakir, A. Chaus, T. Cohen, B. Coleppa , et al. (70 additional authors not shown)

Abstract: This report summarizes the work of the Energy Frontier New Physics working group of the 2013 Community Summer Study (Snowmass). This report summarizes the work of the Energy Frontier New Physics working group of the 2013 Community Summer Study (Snowmass). △ Less

Submitted 1 November, 2013; originally announced November 2013.

Higgs Working Group Report of the Snowmass 2013 Community Planning Study

Authors: S. Dawson, A. Gritsan, H. Logan, J. Qian, C. Tully, R. Van Kooten, A. Ajaib, A. Anastassov, I. Anderson, D. Asner, O. Bake, V. Barger, T. Barklow, B. Batell, M. Battaglia, S. Berge, A. Blondel, S. Bolognesi, J. Brau, E. Brownson, M. Cahill-Rowley, C. Calancha-Paredes, C. -Y. Chen, W. Chou, R. Clare , et al. (109 additional authors not shown)

Abstract: This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs… ▽ More This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs self-coupling, its quantum numbers and $CP$-mixing in Higgs couplings, the Higgs mass and total width, and prospects for direct searches for additional Higgs bosons in extensions of the Standard Model. Our report includes projections of measurement capabilities from detailed studies of the Compact Linear Collider (CLIC), a Gamma-Gamma Collider, the International Linear Collider (ILC), the Large Hadron Collider High-Luminosity Upgrade (HL-LHC), Very Large Hadron Colliders up to 100 TeV (VLHC), a Muon Collider, and a Triple-Large Electron Positron Collider (TLEP). △ Less

Submitted 8 January, 2014; v1 submitted 30 October, 2013; originally announced October 2013.

Instrumentation for the Energy Frontier

Authors: Ulrich Heintz, Daniela Bortoletto, Marcus Hohlmann, Thomas LeCompte, Ron Lipton, Meenakshi Narain, Andrew White

Abstract: The Instrumentation Frontier was set up as a part of the Snowmass 2013 Community Summer Study to examine the instrumentation R&D needed to support particle physics research over the coming decade. This report summarizes the findings of the Energy Frontier subgroup of the Instrumentation Frontier. The Instrumentation Frontier was set up as a part of the Snowmass 2013 Community Summer Study to examine the instrumentation R&D needed to support particle physics research over the coming decade. This report summarizes the findings of the Energy Frontier subgroup of the Instrumentation Frontier. △ Less

Submitted 8 September, 2013; v1 submitted 31 August, 2013; originally announced September 2013.

Comments: 14 pages, prepared in for the Snowmass 2013 Community Summer Study

Report number: SNOW13-00141

Prospects for a Heavy Vector-Like Charge 2/3 Quark T search at the LHC with \sqrt{s}=14 TeV and 33 TeV. "A Snowmass 2013 Whitepaper"

Authors: Saptaparna Bhattacharya, Jimin George, Ulrich Heintz, Ashish Kumar, Meenakshi Narain, John Stupak III

Abstract: We present the prospects for the discovery or exclusion of heavy vector-like charge 2/3 quarks, T, in proton-proton collisions at two center-of-mass energies, 14 and 33 TeV at the LHC. In this note, the pair production of T quark and its antiparticle, with decays to W boson and a b quark (Wb), a top quark and the Higgs boson (tH), and a top quark and Z boson (tZ) are investigated. Higgs boson deca… ▽ More We present the prospects for the discovery or exclusion of heavy vector-like charge 2/3 quarks, T, in proton-proton collisions at two center-of-mass energies, 14 and 33 TeV at the LHC. In this note, the pair production of T quark and its antiparticle, with decays to W boson and a b quark (Wb), a top quark and the Higgs boson (tH), and a top quark and Z boson (tZ) are investigated. Higgs boson decays to $b\bar b$ and $W^+W^-$ final states are selected for this study. △ Less

Submitted 30 August, 2013; originally announced September 2013.

Heavy Higgs Scalars at Future Hadron Colliders (A Snowmass Whitepaper)

Authors: Eric Brownson, Nathaniel Craig, Ulrich Heintz, Gena Kukartsev, Meenakshi Narain, Neeti Parashar, John Stupak III

Abstract: We investigate the prospects for discovery or exclusion of additional Higgs scalars at the 14 TeV and 33 TeV LHC in the context of theories with two Higgs doublets. We focus on the modes with the largest production rates at hadron colliders, namely gluon fusion production of a heavy CP-even scalar H or a heavy CP-odd pseudoscalar A. We consider the sensitivity of the decay channels H to ZZ to 4l,… ▽ More We investigate the prospects for discovery or exclusion of additional Higgs scalars at the 14 TeV and 33 TeV LHC in the context of theories with two Higgs doublets. We focus on the modes with the largest production rates at hadron colliders, namely gluon fusion production of a heavy CP-even scalar H or a heavy CP-odd pseudoscalar A. We consider the sensitivity of the decay channels H to ZZ to 4l, and A to Zh with Z to ll and h to bb or h to tautau. △ Less

Submitted 30 September, 2013; v1 submitted 28 August, 2013; originally announced August 2013.

Combination of CDF and D0 W-Boson Mass Measurements

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (752 additional authors not shown)

Abstract: We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to… ▽ More We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to $2.2 \mathrm{fb}^{-1}$ of integrated luminosity, and a D0 measurement in the electron channel using data corresponding to $4.3 \mathrm{fb}^{-1}$ of integrated luminosity. The resulting Tevatron average for the mass of the $W$ boson is $\MW = 80\,387 \pm 16 \text{MeV}$. Including measurements obtained in electron-positron collisions at LEP yields the most precise value of $\MW = 80\,385 \pm 15 \text{MeV}$. △ Less

Submitted 1 August, 2013; v1 submitted 29 July, 2013; originally announced July 2013.

Comments: Submitted to Phys. Rev. D

Report number: FERMILAB-PUB-13-289-E

Journal ref: Phys. Rev. D 88, 052018 (2013)

3D Technologies for Large Area Trackers

Authors: G. Deptuch, U. Heintz, M. Johnson, C. Kenney, R. Lipton, M. Narian, S. Parker, A. Shenai, L. Spiegel, J. Thom, Z. Ye

Abstract: We describe technologies which can be developed to produce large area, low cost pixelated tracking detec- tors. These utilize wafer-scale 3D electronics and sensor technologies currently being developed in industry. This can result in fully active sensor/readout chip tiles which can be assembled into large area arrays with good yield and minimal dead area. The ability to connect though the bulk of… ▽ More We describe technologies which can be developed to produce large area, low cost pixelated tracking detec- tors. These utilize wafer-scale 3D electronics and sensor technologies currently being developed in industry. This can result in fully active sensor/readout chip tiles which can be assembled into large area arrays with good yield and minimal dead area. The ability to connect though the bulk of the device can also provide better electrical performance and lower mass. △ Less

Submitted 16 July, 2013; originally announced July 2013.

Comments: Whitepaper submitted to the Snowmass Instrumentation Frontier

Combination of the top-quark mass measurements from the Tevatron collider

Authors: The CDF, D0 collaborations, T. Aaltonen, V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Alton, B. Alvarez Gonzalez, G. Alverson, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, A. Askew , et al. (840 additional authors not shown)

Abstract: The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated lumi… ▽ More The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated luminosities of up to 5.8 fb$^{-1}$. This paper reports on a combination of these measurements that results in a more precise value of the mass than any individual decay channel can provide. It describes the treatment of the systematic uncertainties and their correlations. The mass value determined is $173.18 \pm 0.56 \thinspace ({\rm stat}) \pm 0.75 \thinspace ({\rm syst})$ GeV or $173.18 \pm 0.94$ GeV, which has a precision of $\pm 0.54%$, making this the most precise determination of the top quark mass. △ Less

Submitted 16 November, 2012; v1 submitted 4 July, 2012; originally announced July 2012.

Comments: 30 pages and 6 figures, published in Phys. Rev. D

Journal ref: Phys. Rev. D 86, 092003 (2012) [31 pages]

Measurement of the differential cross section dσ/dt in elastic $p\bar{p}$ scattering at sqrt(s)=1.96 TeV

Authors: D0 Collaboration, V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Alton, G. Alverson, G. A. Alves, M. Aoki, A. Askew, S. Atkins, K. Augsten, C. Avila, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee, E. Barberis, P. Baringer, J. Barreto, J. F. Bartlett , et al. (384 additional authors not shown)

Abstract: We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range… ▽ More We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range $0.26 <|t|< 1.2 GeV^2$. For $|t|<0.6 GeV^2$, dσ/dt is described by an exponential function of the form $Ae^{-b|t|}$ with a slope parameter $ b = 16.86 \pm 0.10(stat) \pm 0.20(syst) GeV^{-2}$. A change in slope is observed at $|t| \approx 0.6 GeV^2$, followed by a more gradual |t| dependence with increasing values of |t|. △ Less

Submitted 4 June, 2012; originally announced June 2012.

Comments: 12 pages, 12 figures, 1 table, submitted to Phys. Rev. D, FERMILAB-PUB-12-263-E

Combination of CDF and D0 measurements of the W boson helicity in top quark decays

Authors: The CDF, D0 Collaborations, :, T. Aaltonen, V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Alton, B. Álvarez González, G. Alverson, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, M. Aoki, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi , et al. (846 additional authors not shown)

Abstract: We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) an… ▽ More We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) and right-handed (f+) helicities, we find f0 = 0.722 \pm 0.081 [\pm 0.062 (stat.) \pm 0.052 (syst.)] and f+ = -0.033 \pm 0.046 [\pm 0.034 (stat.) \pm 0.031 (syst.)]. Combining measurements where one of the helicity fractions is fixed to the value expected in the standard model, we find f0 = 0.682 \pm 0.057 [\pm 0.035 (stat.) \pm 0.046 (syst.)] and f+ = -0.015\pm0.035 [\pm 0.018 (stat.) \pm 0.030 (syst.)]. The results are consistent with standard model expectations. △ Less

Submitted 23 February, 2012; originally announced February 2012.

Comments: 11 pages, 1 figure, to be submitted to Phys. Rev D Rap. Comm

Report number: FERMILAB-PUB-12-043-E

Search for pair production of the scalar top quark in muon+tau final states

Authors: D0 Collaboration, V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Alton, G. Alverson, M. Aoki, A. Askew, B. Asman, S. Atkins, O. Atramentov, K. Augsten, C. Avila, J. BackusMayes, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee, E. Barberis, P. Baringer , et al. (385 additional authors not shown)

Abstract: We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a… ▽ More We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$). We investigate final states arising from $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}μτ\tildeν \tildeν$ and $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}ττ\tildeν \tildeν$. With no significant excess of events observed above the background expected from the standard model, we set exclusion limits on this production process in the ($m_{\tilde{t}_{1}}$,$m_{\tildeν}$) plane. △ Less

Submitted 9 February, 2012; originally announced February 2012.

Comments: Submitted to Phys. Lett. B

Report number: FERMILAB-PUB-12-033-E

Searches for High Mass Resonances and Exotics at the Tevatron

Authors: Ulrich Heintz

Abstract: I review recent searches for physics beyond the standard model from the CDF and D0 experiments at the Fermilab Tevatron collider, covering searches for fourth generation quarks, exotic resonances, universal extra dimensions, and dark matter particles. I review recent searches for physics beyond the standard model from the CDF and D0 experiments at the Fermilab Tevatron collider, covering searches for fourth generation quarks, exotic resonances, universal extra dimensions, and dark matter particles. △ Less

Submitted 5 February, 2012; originally announced February 2012.

Comments: Presented at the 2011 Hadron Collider Physics symposium (HCP-2011), Paris, France, November 14-18 2011, 4 pages, 12 figures

Precise measurement of the top quark mass in the dilepton channel at D0

Authors: D0 Collaboration, V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Alton, G. Alverson, G. A. Alves, L. S. Ancu, M. Aoki, M. Arov, A. Askew, B. Åsman, O. Atramentov, C. Avila, J. BackusMayes, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee, E. Barberis , et al. (397 additional authors not shown)

Abstract: We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV… ▽ More We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel. △ Less

Submitted 28 August, 2011; v1 submitted 2 May, 2011; originally announced May 2011.

Comments: 7 pages, 4 figures

Report number: FERMILAB-PUB-11-203-E

Journal ref: Phys. Rev. Lett. 107, 082004 (2011)

Measurement of the W boson helicity in top quark decays using 5.4 fb^-1 of ppbar collision data

Authors: V. M. Abazov, B. Abbott, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Altona, G. Alverson, G. A. Alves, L. S. Ancu, M. Aoki, Y. Arnoud, M. Arov, A. Askew, B. Asman, O. Atramentov, C. Avila, J. BackusMayes, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee, E. Barberis , et al. (403 additional authors not shown)

Abstract: We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and… ▽ More We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and f_+ = 0.023 +- 0.053 [+- 0.041 (stat.) +- 0.034 (syst.)], respectively. This result is consistent at the 98% level with the standard model. A measurement with f_0 fixed to the value from the standard model yields f_+ = 0.010 +- 0.037 [+- 0.022 (stat.) +- 0.030 (syst.) ]. △ Less

Submitted 20 September, 2012; v1 submitted 30 November, 2010; originally announced November 2010.

Comments: To be submitted to Phys. Rev. D

Report number: Fermilab-Pub-10/484-E

Journal ref: Phys.Rev.D83:032009,2011

Search for pair production of the scalar top quark in the electron-muon final state

Authors: V. M. Abazov, B. Abbott, M. Abolins, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Altona, G. Alverson, G. A. Alves, L. S. Ancu, M. Aoki, Y. Arnoud, M. Arov, A. Askew, B. Åsman, O. Atramentov, C. Avila, J. BackusMayes, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee , et al. (406 additional authors not shown)

Abstract: We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino (… ▽ More We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected, and improved exclusion limits at the 95% C.L. are set in the the ($M_{\tilde{t}_1}$,$M_{\tildeν}$) mass plane. △ Less

Submitted 29 September, 2010; originally announced September 2010.

Report number: FERMILAB-PUB-10-393-E

Journal ref: Phys.Lett.B696:321-327,2011

Determination of the width of the top quark

Authors: V. M. Abazov, B. Abbott, M. Abolins, B. S. Acharya, M. Adams, T. Adams, G. D. Alexeev, G. Alkhazov, A. Altona, G. Alverson, G. A. Alves, L. S. Ancu, M. Aoki, Y. Arnoud, M. Arov, A. Askew, B. Åsman, O. Atramentov, C. Avila, J. BackusMayes, F. Badaud, L. Bagby, B. Baldin, D. V. Bandurin, S. Banerjee , et al. (406 additional authors not shown)

Abstract: We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV… ▽ More We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV, which translates to a top-quark lifetime of tau_t = (3.3 +1.3 -0.9) x 10^-25 s. Assuming a high mass fourth generation b' quark and unitarity of the four-generation quark-mixing matrix, we set the first upper limit on |Vtb'| < 0.63 at 95% C.L. △ Less

Submitted 28 September, 2010; originally announced September 2010.

Comments: submitted to Phys. Rev. Letters

Report number: FERMILAB-PUB-10/394-E

Journal ref: Phys.Rev.Lett.106:022001,2011

The D0 Silicon Microstrip Tracker

Authors: S. N. Ahmed, R. Angstadt, M. Aoki, B. Åsman, S. Austin, L. Bagby, E. Barberis, P. Baringer, A. Bean, A. Bischoff, F. Blekman, T. A. Bolton, C. Boswell, M. Bowden, F. Browning, D. Buchholz, S. Burdin, D. Butler, H. Cease, S. Choi, A. R. Clark, J. Clutter, A. Cooper, W. E. Cooper, M. Corcoran , et al. (109 additional authors not shown)

Abstract: This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided. This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided. △ Less

Submitted 5 May, 2010; originally announced May 2010.

Report number: FERMILAB-PUB-10-101

Journal ref: Nucl.Instrum.Meth.A634:8-46,2011

Top quark mass measurements at the Tevatron

Authors: Ulrich Heintz

Abstract: The mass of the top quark has been measured at Fermilab using the Tevatron ppbar collider to a precision of less than 1%. I discuss the individual measurements that go into this result and its impact on our understanding of the standard model of the electroweak interactions. The mass of the top quark has been measured at Fermilab using the Tevatron ppbar collider to a precision of less than 1%. I discuss the individual measurements that go into this result and its impact on our understanding of the standard model of the electroweak interactions. △ Less

Submitted 6 June, 2008; originally announced June 2008.

Comments: 4 pages, 2 figures, contributed to proceedings of Moriond QCD 2008 conference

Report number: FERMILAB-CONF-08-155-E

The D0 Run II Impact Parameter Trigger

Authors: T. Adams, Q. An, K. M. Black, T. Bose, N. J. Buchanan, S. Caron, D. K. Cho, S. Choi, A. Das, M. Das, H. Dong, W. Earle, H. Evans, S. N. Fatakia, L. Feligioni, T. Fitzpatrick, E. Hazen, U. Heintz, K. Herner, J. D. Hobbs, D. Khatidze, W. M. Lee, S. L. Linn, M. Narain, C. Pancake , et al. (18 additional authors not shown)

Abstract: Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as… ▽ More Many physics topics to be studied by the D0 experiment during Run II of the Fermilab Tevatron ppbar collider give rise to final states containing b--flavored particles. Examples include Higgs searches, top quark production and decay studies, and full reconstruction of B decays. The sensitivity to such modes has been significantly enhanced by the installation of a silicon based vertex detector as part of the DO detector upgrade for Run II. Interesting events must be identified initially in 100-200 microseconds to be available for later study. This paper describes custom electronics used in the DO trigger system to provide the real--time identification of events having tracks consistent with the decay of b--flavored particles. △ Less

Submitted 17 January, 2007; originally announced January 2007.

Comments: To be submitted to Nucl. Instrum. Methods A. 56 pages, 31 figures

Present and Future Electroweak Precision Measurements and the Indirect Determination of the Mass of the Higgs Boson

Authors: U. Baur, R. Clare, A. Denner, J. L. Diaz Cruz, S. Dittmaier, J. Erler, M. Gruenewald, S. Heinemeyer, U. Heintz, M. Kraemer, H. E. Logan, K. Monig, M. Narain, M. Roth, M. Schmitt, D. Wackeroth, G. Weiglein, D. R. Wood, J. Wudka

Abstract: We discuss the experimental and theoretical uncertainties on precision electroweak observables and their relationship to the indirect constraints on the Higgs-boson mass, $\MH$, in the Standard Model (SM). The critical experimental measurements ($\MW$, $\sweff$, $\mt$, ...) are evaluated in terms of their present uncertainties and their prospects for improved precision at future colliders, and t… ▽ More We discuss the experimental and theoretical uncertainties on precision electroweak observables and their relationship to the indirect constraints on the Higgs-boson mass, $\MH$, in the Standard Model (SM). The critical experimental measurements ($\MW$, $\sweff$, $\mt$, ...) are evaluated in terms of their present uncertainties and their prospects for improved precision at future colliders, and their contribution to the constraints on $\MH$. In addition, the current uncertainties of the theoretical predictions for $\MW$ and $\sweff$ due to missing higher order corrections are estimated and expectations and necessary theoretical improvements for future colliders are explored. The constraints from rare B decays are also discussed. Analysis of the present experimental and theoretical precisions yield a current upper bound on $\MH$ of $\sim 200$ GeV. Including anticipated improvements corresponding to the prospective situation at future colliders (Tevatron Run II, LHC, LC/GigaZ), we find a relative precision of about 25% to 8% (or better) is achievable in the indirect determination of $\MH$. △ Less

Submitted 31 January, 2002; originally announced February 2002.

Comments: Summary report of the Precision Measurement working group at Snowmass 2001

Report number: BNL-HET-02/5, FT2002-01, DCPT/02/14, IPPP/02/07, UB-HET-02-02, PITHA02/04, FERMILAB-Conf-02/010-T, KA-TP-3-2002

Journal ref: eConf C010630:P1WG1,2001

Testing the Standard Model at the Fermilab Tevatron

Authors: Martin Grunewald, Ulrich Heintz, Meenakshi Narain, Michael Schmitt

Abstract: In this note we study the prospect of high-precision measurements of W boson mass, top quark mass, and forward-backward asymmetry in Z->ee decays and the search for the Higgs boson during Run 2 to challenge the standard model. In this note we study the prospect of high-precision measurements of W boson mass, top quark mass, and forward-backward asymmetry in Z->ee decays and the search for the Higgs boson during Run 2 to challenge the standard model. △ Less

Submitted 17 November, 2001; originally announced November 2001.

Comments: 7 pages, 1 figure, contribution to proceedings of Snowmass 2001 workshop

Report number: BUHEP-01-30, NUHEP-EXP/01-054, PITHA 01/10

Journal ref: eConfC010630:P117,2001

Precision Measurements of the W-Boson Mass

Authors: Douglas A. Glenzinski, Ulrich Heintz

Abstract: The Standard Model of electroweak interactions has had great success in describing the observed data over the last three decades. The precision of experimental measurements affords tests of the Standard Model at the quantum loop level beyond leading order. Despite this great success it is important to continue confronting experimental measurements with the Standard Model predictions as any devia… ▽ More The Standard Model of electroweak interactions has had great success in describing the observed data over the last three decades. The precision of experimental measurements affords tests of the Standard Model at the quantum loop level beyond leading order. Despite this great success it is important to continue confronting experimental measurements with the Standard Model predictions as any deviation would signal new physics. As a fundamental parameter of the Standard Model, the mass of the W-boson, M_W, is of particular importance. Aside from being an important test of the SM itself, a precision measurement of M_W can be used to constrain the mass of the Higgs boson, M_H. In this article we review the principal experimental techniques for determining M_W and discuss their combination into a single precision M_W measurement, which is then used to yield constraints on M_H. We conclude by briefly discussing future prospects for precision measurements of the W-boson mass. △ Less

Submitted 31 July, 2000; v1 submitted 18 July, 2000; originally announced July 2000.

Comments: 37 pages, 13 figures, LaTex, to be published in volume 50 of Annual Review of Nuclear and Particle Science

Report number: Fermilab-Pub-00/166-E, BUHEP-00-14

Journal ref: Ann.Rev.Nucl.Part.Sci.50:207-248,2000