-
Dose rate dependence of TID damage to 65 nm CMOS transistors in X-ray irradiations of the ATLAS ITk Pixel ASIC (ITkPix)
Authors:
Daniela Bortoletto,
Aleksandra Dimitrievska,
Maurice Garcia-Sciveres,
Timon Heim,
Maria Mironova,
Richard Plackett,
Ian Shipsey,
Junwen Xiong
Abstract:
The ATLAS Inner Tracker (ITk) upgrade for the High-Luminosity LHC (HL-LHC) requires a radiation-tolerant pixel readout chip, which must withstand a total ionising dose (TID) of up to 1 Grad. The readout ASIC for the ITk upgrade has been designed by the RD53 collaboration using 65 nm CMOS technology. In order to characterise the radiation tolerance of the chip digital logic, the RD53 ASICs include…
▽ More
The ATLAS Inner Tracker (ITk) upgrade for the High-Luminosity LHC (HL-LHC) requires a radiation-tolerant pixel readout chip, which must withstand a total ionising dose (TID) of up to 1 Grad. The readout ASIC for the ITk upgrade has been designed by the RD53 collaboration using 65 nm CMOS technology. In order to characterise the radiation tolerance of the chip digital logic, the RD53 ASICs include ring oscillators, which can be used to measure gate delay degradation. Extensive X-ray irradiation studies of the ring oscillators have been performed on the ITk Pixel pre-production readout ASIC, ITkPixV1. A dependence of radiation damage on dose rate has been observed in 65 nm CMOS technology. This paper aims to quantify the dose rate dependence of TID damage to the ITkPix ring oscillators and, therefore, the ITkPix ASIC digital logic. X-ray irradiations at different dose rates between 20 krad/h and 30 Mrad/h are compared. A dose rate dependence is observed, with 2-3 times more damage at the lowest dose rate of 20 krad/h, compared to 4 Mrad/h. The dose rate dependence was also observed to be dependent on transistor size and type.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Solid State Detectors and Tracking for Snowmass
Authors:
A. Affolder,
A. Apresyan,
S. Worm,
M. Albrow,
D. Ally,
D. Ambrose,
E. Anderssen,
N. Apadula,
P. Asenov,
W. Armstrong,
M. Artuso,
A. Barbier,
P. Barletta,
L. Bauerdick,
D. Berry,
M. Bomben,
M. Boscardin,
J. Brau,
W. Brooks,
M. Breidenbach,
J. Buckley,
V. Cairo,
R. Caputo,
L. Carpenter,
M. Centis-Vignali
, et al. (110 additional authors not shown)
Abstract:
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the…
▽ More
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03).
△ Less
Submitted 19 October, 2022; v1 submitted 8 September, 2022;
originally announced September 2022.
-
Enabling Capabilities for Infrastructure and Workforce in Electronics and ASICs
Authors:
M. Artuso,
C. Grace,
T. Heim,
A. Dragone,
R. Herbst,
L. Rota,
G. Carini,
G. Deptuch,
M. Newcomer,
K. Flood
Abstract:
The impressive progress in data rate capabilities, pattern recognition, and spatial resolution of current detectors in experimental particle physics has been possible thanks to the availability of sophisticated analog processors combined with complex digital signal processors implemented in custom made front end ASICs. The demands in terms of performance and increasingly smaller feature sizes are…
▽ More
The impressive progress in data rate capabilities, pattern recognition, and spatial resolution of current detectors in experimental particle physics has been possible thanks to the availability of sophisticated analog processors combined with complex digital signal processors implemented in custom made front end ASICs. The demands in terms of performance and increasingly smaller feature sizes are significant. In order to meet these instrumentation challenges, we need to educate and retain a skilled work force, as well as aggregate design tools and acquired knowledge. We propose a multifaceted initiative to ensure that these needs are met.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
Proceedings of NeurIPS 2020 Workshop on Artificial Intelligence for Humanitarian Assistance and Disaster Response
Authors:
Ritwik Gupta,
Eric T. Heim,
Edoardo Nemni
Abstract:
These are the "proceedings" of the 2nd AI + HADR workshop which was held virtually on December 12, 2020 as part of the Neural Information Processing Systems conference. These are non-archival and merely serve as a way to collate all the papers accepted to the workshop.
These are the "proceedings" of the 2nd AI + HADR workshop which was held virtually on December 12, 2020 as part of the Neural Information Processing Systems conference. These are non-archival and merely serve as a way to collate all the papers accepted to the workshop.
△ Less
Submitted 7 December, 2020; v1 submitted 3 December, 2020;
originally announced December 2020.
-
Proceedings of NeurIPS 2019 Workshop on Artificial Intelligence for Humanitarian Assistance and Disaster Response
Authors:
Ritwik Gupta,
Eric T. Heim
Abstract:
These are the "proceedings" of the 1st AI + HADR workshop which was held in Vancouver, Canada on December 13, 2019 as part of the Neural Information Processing Systems conference. These are non-archival and serve solely as a collation of all the papers accepted to the workshop.
These are the "proceedings" of the 1st AI + HADR workshop which was held in Vancouver, Canada on December 13, 2019 as part of the Neural Information Processing Systems conference. These are non-archival and serve solely as a collation of all the papers accepted to the workshop.
△ Less
Submitted 3 December, 2020; v1 submitted 2 December, 2020;
originally announced December 2020.
-
The ABC130 barrel module prototy** programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
New Method for Silicon Sensor Charge Calibration Using Compton Scattering
Authors:
Patrick McCormack,
Maurice Garcia-Sciveres,
Timon Heim,
Benjamin Nachman,
Magne Lauritzen
Abstract:
In order to cope with increasing lifetime radiation damage expected at collider experiments, silicon sensors are becoming increasingly thin. To achieve adequate detection efficiency, the next generation of detectors may have to operate with thresholds below 1000 electron-hole pairs. The readout chips attached to these sensors should be calibrated to some known external charge, but there is a lack…
▽ More
In order to cope with increasing lifetime radiation damage expected at collider experiments, silicon sensors are becoming increasingly thin. To achieve adequate detection efficiency, the next generation of detectors may have to operate with thresholds below 1000 electron-hole pairs. The readout chips attached to these sensors should be calibrated to some known external charge, but there is a lack of traditional sources in this charge regime. We present a new method for absolute charge calibration based on Compton scattering. In the past, this method has been used for calibration of scintillators, but to our knowledge never for silicon detectors. Here it has been studied using a 150 micron thick planar silicon sensor on an RD53A readout integrated circuit.
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Measured Effectiveness of Deep N-well Substrate Isolation in a 65nm Pixel Readout Chip Prototype
Authors:
Peilian Liu,
Maurice Garcia-Sciveres,
Timon Heim,
Amanda Krieger,
Dario Gnani
Abstract:
The same charge sensitive preamplifier and discriminator circuit with different isolation strategies has been tested to compare the isolation of both analog and digital circuits from the substrate of a 65nm bulk CMOS process to the isolation of only digital circuits, tying analog ground locally to the substrate. This study will show that the circuit with analog on the substrate and digital in deep…
▽ More
The same charge sensitive preamplifier and discriminator circuit with different isolation strategies has been tested to compare the isolation of both analog and digital circuits from the substrate of a 65nm bulk CMOS process to the isolation of only digital circuits, tying analog ground locally to the substrate. This study will show that the circuit with analog on the substrate and digital in deep N-well has better noise isolation between analog and digital.
△ Less
Submitted 15 March, 2020; v1 submitted 16 August, 2019;
originally announced August 2019.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Self-Adjusting Threshold Mechanism for Pixel Detectors
Authors:
Timon Heim,
Maurice Garcia-Sciveres
Abstract:
Readout chips of hybrid pixel detectors use a low power amplifier and threshold discrimination to process charge deposited in semiconductor sensors. Due to transistor mismatch each pixel circuit needs to be calibrated individually to achieve response uniformity. Traditionally this is addressed by programmable threshold trimming in each pixel, but requires robustness against radiation effects, temp…
▽ More
Readout chips of hybrid pixel detectors use a low power amplifier and threshold discrimination to process charge deposited in semiconductor sensors. Due to transistor mismatch each pixel circuit needs to be calibrated individually to achieve response uniformity. Traditionally this is addressed by programmable threshold trimming in each pixel, but requires robustness against radiation effects, temperature, and time. In this paper a self-adjusting threshold mechanism is presented, which corrects the threshold for both spatial inequality and time variation and maintains a constant response. It exploits the electrical noise as relative measure for the threshold and automatically adjust the threshold of each pixel to always achieve a uniform frequency of noise hits. A digital implementation of the method in the form of an up/down counter and combinatorial logic filter is presented. The behavior of this circuit has been simulated to evaluate its performance and compare it to traditional calibration results. The simulation results show that this mechanism can perform equally well, but eliminates instability over time and is immune to single event upsets.
△ Less
Submitted 11 April, 2017; v1 submitted 5 January, 2017;
originally announced January 2017.
-
Comment on: ``Solving the riddle of the bright mismatches: Labeling and effective binding in oligonucleotide arrays"
Authors:
E. Carlon,
T. Heim,
J. Klein Wolterink,
G. T. Barkema
Abstract:
In a recent paper [Phys. Rev. E 68, 011906 (2003)], Naef and Magnasco suggested that the "bright" mismatches observed in Affymetrix microarray experiments are caused by the fluorescent molecules used to label RNA target sequences, which would impede target-probe hybridization. Their conclusion is based on the observation of "unexpected" asymmetries in the affinities obtained by fitting microarra…
▽ More
In a recent paper [Phys. Rev. E 68, 011906 (2003)], Naef and Magnasco suggested that the "bright" mismatches observed in Affymetrix microarray experiments are caused by the fluorescent molecules used to label RNA target sequences, which would impede target-probe hybridization. Their conclusion is based on the observation of "unexpected" asymmetries in the affinities obtained by fitting microarray data from publicly available experiments. We point out here that the observed asymmetry is due to the inequivalence of RNA and DNA, and that the reported affinities are consistent with stacking free energies obtained from melting experiments of unlabeled nucleic acids in solution. The conclusion of Naef and Magnasco is therefore based on an unjustified assumption.
△ Less
Submitted 18 July, 2006;
originally announced July 2006.
-
Physics-based analysis of Affymetrix microarray data
Authors:
T. Heim,
L. -C. Tranchevent,
E. Carlon,
G. T. Barkema
Abstract:
We analyze publicly available data on Affymetrix microarrays spike-in experiments on the human HGU133 chipset in which sequences are added in solution at known concentrations. The spike-in set contains sequences of bacterial, human and artificial origin. Our analysis is based on a recently introduced molecular-based model [E. Carlon and T. Heim, Physica A 362, 433 (2006)] which takes into accoun…
▽ More
We analyze publicly available data on Affymetrix microarrays spike-in experiments on the human HGU133 chipset in which sequences are added in solution at known concentrations. The spike-in set contains sequences of bacterial, human and artificial origin. Our analysis is based on a recently introduced molecular-based model [E. Carlon and T. Heim, Physica A 362, 433 (2006)] which takes into account both probe-target hybridization and target-target partial hybridization in solution. The hybridization free energies are obtained from the nearest-neighbor model with experimentally determined parameters. The molecular-based model suggests a rescaling that should result in a "collapse" of the data at different concentrations into a single universal curve. We indeed find such a collapse, with the same parameters as obtained before for the older HGU95 chip set. The quality of the collapse varies according to the probe set considered. Artificial sequences, chosen by Affymetrix to be as different as possible from any other human genome sequence, generally show a much better collapse and thus a better agreement with the model than all other sequences. This suggests that the observed deviations from the predicted collapse are related to the choice of probes or have a biological origin, rather than being a problem with the proposed model.
△ Less
Submitted 5 May, 2006;
originally announced May 2006.
-
Effective affinities in microarray data
Authors:
T. Heim,
J. Klein Wolterink,
E. Carlon,
G. T. Barkema
Abstract:
In the past couple of years several studies have shown that hybridization in Affymetrix DNA microarrays can be rather well understood on the basis of simple models of physical chemistry. In the majority of the cases a Langmuir isotherm was used to fit experimental data. Although there is a general consensus about this approach, some discrepancies between different studies are evident. For instan…
▽ More
In the past couple of years several studies have shown that hybridization in Affymetrix DNA microarrays can be rather well understood on the basis of simple models of physical chemistry. In the majority of the cases a Langmuir isotherm was used to fit experimental data. Although there is a general consensus about this approach, some discrepancies between different studies are evident. For instance, some authors have fitted the hybridization affinities from the microarray fluorescent intensities, while others used affinities obtained from melting experiments in solution. The former approach yields fitted affinities that at first sight are only partially consistent with solution values. In this paper we show that this discrepancy exists only superficially: a sufficiently complete model provides effective affinities which are fully consistent with those fitted to experimental data. This link provides new insight on the relevant processes underlying the functioning of DNA microarrays.
△ Less
Submitted 4 May, 2006;
originally announced May 2006.
-
Thermodynamics of RNA/DNA hybridization in high density oligonucleotide microarrays
Authors:
Enrico Carlon,
Thomas Heim
Abstract:
We analyze a series of publicly available controlled experiments (Latin square) on Affymetrix high density oligonucleotide microarrays using a simple physical model of the hybridization process. We plot for each gene the signal intensity versus the hybridization free energy of RNA/DNA duplexes in solution, for perfect matching and mismatching probes. Both values tend to align on a single master…
▽ More
We analyze a series of publicly available controlled experiments (Latin square) on Affymetrix high density oligonucleotide microarrays using a simple physical model of the hybridization process. We plot for each gene the signal intensity versus the hybridization free energy of RNA/DNA duplexes in solution, for perfect matching and mismatching probes. Both values tend to align on a single master curve in good agreement with Langmuir adsorption theory, provided one takes into account the decrease of the effective target concentration due to target-target hybridization in solution. We give an example of a deviation from the expected thermodynamical behavior for the probe set 1091\_at due to annotation problems, i.e. the surface-bound probe is not the exact complement of the target RNA sequence, because of errors present in public databases at the time when the array was designed. We show that the parametrization of the experimental data with RNA/DNA free energy improves the quality of the fits and enhances the stability of the fitting parameters compared to previous studies.
△ Less
Submitted 4 May, 2006; v1 submitted 2 November, 2004;
originally announced November 2004.
-
Ambipolar charge injection and transport in a single pentacene monolayer island
Authors:
Thomas Heim,
Kamal Lmimouni,
Dominique Vuillaume
Abstract:
Electrons and holes are locally injected in a single pentacene monolayer island. The two-dimensional distribution and concentration of the injected carriers are measured by electrical force microscopy. In crystalline monolayer islands, both carriers are delocalized over the whole island. On disordered monolayer, carriers stay localized at their injection point. These results provide insight into…
▽ More
Electrons and holes are locally injected in a single pentacene monolayer island. The two-dimensional distribution and concentration of the injected carriers are measured by electrical force microscopy. In crystalline monolayer islands, both carriers are delocalized over the whole island. On disordered monolayer, carriers stay localized at their injection point. These results provide insight into the electronic properties, at the nanometer scale, of organic monolayers governing performances of organic transistors and molecular devices.
△ Less
Submitted 24 September, 2004;
originally announced September 2004.
-
Localization and delocalization of charges injected in DNA
Authors:
Thomas Heim,
Thierry Melin,
Dominique Deresmes,
Dominique Vuillaume
Abstract:
The electrical properties of DNA molecules are investigated by charge injection and electric force microscopy experiments. Prior to injection, DNA molecules exhibit a weak positively charged state. We probe the electrical behaviour of DNA by measuring the localized or delocalized character of the DNA charge states upon injection of excess charges. We show that injected charges do not delocalize…
▽ More
The electrical properties of DNA molecules are investigated by charge injection and electric force microscopy experiments. Prior to injection, DNA molecules exhibit a weak positively charged state. We probe the electrical behaviour of DNA by measuring the localized or delocalized character of the DNA charge states upon injection of excess charges. We show that injected charges do not delocalize for overstretched DNA prepared by a receding meniscus technique, while the adjunction of spermidine during the deposition leads to relaxed DNA molecules exhibiting a charge delocalization over microns. The interplay between charge localization/delocalization and deposition techniques may explain that transport behaviors ranging from insulating to conductive have been reported for DNA deposited on surfaces.
△ Less
Submitted 3 September, 2004;
originally announced September 2004.
-
Conductivity of DNA probed by conducting-atomic force microscopy: effects of contact electrode, DNA structure, surface interactions
Authors:
Thomas Heim,
Dominique Deresmes,
Dominique Vuillaume
Abstract:
We studied the electrical conductivity of DNA molecules with conducting atomic force microscopy as a function of the chemical nature of the substrate surfaces, the nature of the electrical contact, and the number of DNA molecules (from a few molecules, to ropes and large fibers containing up to ~ 106 molecules). Independent of the chemical nature of the surface (hydrophobic or hydrophilic, elect…
▽ More
We studied the electrical conductivity of DNA molecules with conducting atomic force microscopy as a function of the chemical nature of the substrate surfaces, the nature of the electrical contact, and the number of DNA molecules (from a few molecules, to ropes and large fibers containing up to ~ 106 molecules). Independent of the chemical nature of the surface (hydrophobic or hydrophilic, electrically neutral or charged), we find that DNA is highly resistive. From a large number of current-voltage curves measured at several distance along the DNA, we estimate a conductivity of about 10-6-10-5 S.cm-1 per DNA molecule. For single DNA molecules, this highly resistive behavior is correlated with its flattened conformation on the surface (reduced thickness, \~0.5-1.5 nm, compared to its nominal value, ~2.4 nm). We find that intercalating an organic semiconductor buffer film between the DNA and the metal electrode improves the reliability of the contact, while direct metal evaporation usually destroys the DNA and prevents any current measurements. After long exposure under vacuum or dry nitrogen, the conductivity strongly decreases, leading to the conclusion that water molecules and ions in the hydration shell of the DNA play a major role.
△ Less
Submitted 24 May, 2004;
originally announced May 2004.
-
Charge transport in l-DNA probed by conducting-AFM, and relationship with its structure
Authors:
Thomas Heim,
Dominique Deresemes,
Dominique Vuillaume
Abstract:
We studied the electrical conductivity of DNA samples as function of the number of DNA molecules. We showed that the insulating gap (no current at low voltage) increases from ~1-2 V for bundles and large ropes to ~4-7 V for few DNA molecules. From the distance dependent variation of the current, a unique hop** distance of ~3 nm is calculated (polaron-hop** model) independently of the number…
▽ More
We studied the electrical conductivity of DNA samples as function of the number of DNA molecules. We showed that the insulating gap (no current at low voltage) increases from ~1-2 V for bundles and large ropes to ~4-7 V for few DNA molecules. From the distance dependent variation of the current, a unique hop** distance of ~3 nm is calculated (polaron-hop** model) independently of the number of DNA in the sample. The highly resistive behavior of the single DNA is correlated with its flattened conformation on the surface (reduced thickness, ~0.5-1.5 nm, compared to its nominal value, ~2 nm).
△ Less
Submitted 10 October, 2003;
originally announced October 2003.
-
A Monte Carlo Calculation of the Pionium Break-up Probability with Different Sets of Pionium Target Cross Sections
Authors:
C. Santamarina,
M. Schumann,
L. G. Afanasyev,
T. Heim
Abstract:
Chiral Perturbation Theory predicts the lifetime of pionium, a hydrogen-like $π^+ π^-$ atom, to better than 3% precision. The goal of the DIRAC experiment at CERN is to obtain and check this value experimentally by measuring the break-up probability of pionium in a target. In order to accurately measure the lifetime one needs to know the relationship between the break-up probability and lifetime…
▽ More
Chiral Perturbation Theory predicts the lifetime of pionium, a hydrogen-like $π^+ π^-$ atom, to better than 3% precision. The goal of the DIRAC experiment at CERN is to obtain and check this value experimentally by measuring the break-up probability of pionium in a target. In order to accurately measure the lifetime one needs to know the relationship between the break-up probability and lifetime to a 1% accuracy. We have obtained this dependence by modeling the evolution of pionic atoms in the target using Monte Carlo methods. The model relies on the computation of the pionium--target atom interaction cross sections. Three different sets of pionium--target cross sections with varying degrees of complexity were used: from the simplest first order Born approximation involving only the electrostatic interaction to a more advanced approach taking into account multi-photon exchanges and relativistic effects. We conclude that in order to obtain the pionium lifetime to 1% accuracy from the break-up probability, the pionium--target cross sections must be known with the same accuracy for the low excited bound states of the pionic atom. This result has been achieved, for low $Z$ targets, with the two most precise cross section sets. For large $Z$ targets only the set accounting for multiphoton exchange satisfies the condition.
△ Less
Submitted 23 June, 2003;
originally announced June 2003.
-
Coherent and incoherent atomic scattering: Formalism and application to pionium interacting with matter
Authors:
T. A. Heim,
K. Hencken,
D. Trautmann,
G. Baur
Abstract:
The experimental determination of the lifetime of pionium provides a very important test on chiral perturbation theory. This quantity is determined in the DIRAC experiment at CERN. In the analysis of this experiment, the breakup probabilities of of pionium in matter are needed to high accuracy as a theoretical input. We study in detail the influence of the target electrons. They contribute throu…
▽ More
The experimental determination of the lifetime of pionium provides a very important test on chiral perturbation theory. This quantity is determined in the DIRAC experiment at CERN. In the analysis of this experiment, the breakup probabilities of of pionium in matter are needed to high accuracy as a theoretical input. We study in detail the influence of the target electrons. They contribute through screening and incoherent effects. We use Dirac-Hartree- Fock-Slater wavefunctions in order to determine the corresponding form factors. We find that the inner-shell electrons contribute less than the weakly bound outer electrons. Furthermore, we establish a more rigorous estimate for the magnitude of the contributions form the transverse current (magnetic terms thus far neglected in the calculations).
△ Less
Submitted 8 August, 2000; v1 submitted 1 March, 2000;
originally announced March 2000.
-
Alternative sets of hyperspherical harmonics: Satisfying cusp conditions through frame transformations
Authors:
T. A. Heim,
D. Green
Abstract:
By extending the concept of Euler-angle rotations to more than three dimensions, we develop the systematics under rotations in higher-dimensional space for a novel set of hyperspherical harmonics. Applying this formalism, we determine all pairwise Coulomb interactions in a few-body system without recourse to multipole expansions. Our approach combines the advantages of relative coordinates with…
▽ More
By extending the concept of Euler-angle rotations to more than three dimensions, we develop the systematics under rotations in higher-dimensional space for a novel set of hyperspherical harmonics. Applying this formalism, we determine all pairwise Coulomb interactions in a few-body system without recourse to multipole expansions. Our approach combines the advantages of relative coordinates with those of the hyperspherical description. In the present method, each Coulomb matrix element reduces to the ``1/r'' form familiar from the two-body problem. Consequently, our calculation accounts for all the cusps in the wave function whenever an interparticle separation vanishes. Unlike a truncated multipole expansion, the calculation presented here is exact. Following the systematic development of the procedure for an arbitrary number of particles, we demonstrate it explicitly with the simplest nontrivial example, the three-body system.
△ Less
Submitted 26 May, 1999;
originally announced May 1999.
-
Geometry and symmetries of multi-particle systems
Authors:
U. Fano,
D. Green,
J. L. Bohn,
T. A. Heim
Abstract:
The quantum dynamical evolution of atomic and molecular aggregates, from their compact to their fragmented states, is parametrized by a single collective radial parameter. Treating all the remaining particle coordinates in d dimensions democratically, as a set of angles orthogonal to this collective radius or by equivalent variables, bypasses all independent-particle approximations. The invarian…
▽ More
The quantum dynamical evolution of atomic and molecular aggregates, from their compact to their fragmented states, is parametrized by a single collective radial parameter. Treating all the remaining particle coordinates in d dimensions democratically, as a set of angles orthogonal to this collective radius or by equivalent variables, bypasses all independent-particle approximations. The invariance of the total kinetic energy under arbitrary d-dimensional transformations which preserve the radial parameter gives rise to novel quantum numbers and ladder operators interconnecting its eigenstates at each value of the radial parameter.
We develop the systematics and technology of this approach, introducing the relevant mathematics tutorially, by analogy to the familiar theory of angular momentum in three dimensions. The angular basis functions so obtained are treated in a manifestly coordinate-free manner, thus serving as a flexible generalized basis for carrying out detailed studies of wavefunction evolution in multi-particle systems.
△ Less
Submitted 26 May, 1999;
originally announced May 1999.
-
The morphological segregation of galaxies in clusters. III. The distant cluster Cl0939+4713 (Abell 851)
Authors:
S. Andreon,
E. Davoust,
T. Heim
Abstract:
We have performed an isophotal analysis of galaxies in the distant (z=0.4) cluster Cl0939+4713 (Abell 851), using post-refurbished Hubble Space Telescope images. Morphological type estimates for the galaxies are given. A rigorous comparison of the properties of the types shows that early-type galaxies in Cl0939+4713 are, within the present statistical or systematic errors, indistinguishable from…
▽ More
We have performed an isophotal analysis of galaxies in the distant (z=0.4) cluster Cl0939+4713 (Abell 851), using post-refurbished Hubble Space Telescope images. Morphological type estimates for the galaxies are given. A rigorous comparison of the properties of the types shows that early-type galaxies in Cl0939+4713 are, within the present statistical or systematic errors, indistinguishable from their counterparts in Coma in all their studied properties, namely ellipticity profile, slope of the color-magnitude relation from the near-ultraviolet to the near-infrared colors, mean surface brightness and luminosity function in the restframe photographic J band, homogeneity in color (around the color-magnitude relation). Furthermore ellipticals and lenticulars are separately homogeneous in their mean surface brightness, and have similar relative mean surface brightnesses in both clusters. Spirals are overabundant in Cl0939+4713 with respect to Coma, but twice less than previously estimated, and are more similar to field spirals than to cluster spirals. We suggest that the differences in the photometric properties of the spirals in the two clusters arise from differences in cluster gas density distribution which ultimately bring star formation in the spirals to a stop in Coma, but not in Cl0939+4713. The morphological types are segregated along a privileged direction that coincides with the position angle of the major axis of the outer X-ray isophotes in the cluster, just like in Coma and Perseus.
△ Less
Submitted 3 December, 1996;
originally announced December 1996.
