-
Know your sensORs -- A Modality Study For Surgical Action Classification
Authors:
Lennart Bastian,
Tobias Czempiel,
Christian Heiliger,
Konrad Karcz,
Ulrich Eck,
Benjamin Busam,
Nassir Navab
Abstract:
The surgical operating room (OR) presents many opportunities for automation and optimization. Videos from various sources in the OR are becoming increasingly available. The medical community seeks to leverage this wealth of data to develop automated methods to advance interventional care, lower costs, and improve overall patient outcomes. Existing datasets from OR room cameras are thus far limited…
▽ More
The surgical operating room (OR) presents many opportunities for automation and optimization. Videos from various sources in the OR are becoming increasingly available. The medical community seeks to leverage this wealth of data to develop automated methods to advance interventional care, lower costs, and improve overall patient outcomes. Existing datasets from OR room cameras are thus far limited in size or modalities acquired, leaving it unclear which sensor modalities are best suited for tasks such as recognizing surgical action from videos. This study demonstrates that surgical action recognition performance can vary depending on the image modalities used. We perform a methodical analysis on several commonly available sensor modalities, presenting two fusion approaches that improve classification performance. The analyses are carried out on a set of multi-view RGB-D video recordings of 18 laparoscopic procedures.
△ Less
Submitted 17 September, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Circular photogalvanic effects in topological insulator/ferromagnet hybrid structures
Authors:
T. Schumann,
T. Kleinke,
L. Braun,
N. Meyer,
G. Mussler,
J. Kampmeier,
D. Grützmacher,
E. Schmoranzerova,
K. Olejník,
H. Reichlová,
C. Heiliger,
C. Denker,
J. Walowski,
T. Kampfrath,
M. Münzenberg
Abstract:
We study laser driven spin-current effects at ferromagnet/topological-insulator interfaces by two complementary experimental approaches. The DC photocurrent is studied in ferromagnet/topological-insulator bilayers with high spatial resolution. Dynamic interface currents are explored via the emission of terahertz radiation emitted by these currents with high temporal resolution. From our experiment…
▽ More
We study laser driven spin-current effects at ferromagnet/topological-insulator interfaces by two complementary experimental approaches. The DC photocurrent is studied in ferromagnet/topological-insulator bilayers with high spatial resolution. Dynamic interface currents are explored via the emission of terahertz radiation emitted by these currents with high temporal resolution. From our experiments, we reveal a lateral and dynamic interaction of the ferromagnet and the topological insulator interface.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Spin accumulation from non-equilibrium first principles methods
Authors:
Alexander Fabian,
Hugo Rossignol,
Ming-Hung Wu,
Martin Gradhand,
Michael Czerner,
Christian Heiliger
Abstract:
For the technologically relevant spin Hall effect most theoretical approaches rely on the evaluation of the spin-conductivity tensor. In contrast, for most experimental configurations the generation of spin accumulation at interfaces and surfaces is the relevant quantity. Here, we directly calculate the accumulation of spins due to the spin Hall effect at the surface of a thin metallic layer, maki…
▽ More
For the technologically relevant spin Hall effect most theoretical approaches rely on the evaluation of the spin-conductivity tensor. In contrast, for most experimental configurations the generation of spin accumulation at interfaces and surfaces is the relevant quantity. Here, we directly calculate the accumulation of spins due to the spin Hall effect at the surface of a thin metallic layer, making quantitative predictions for different materials. Two distinct limits are considered, both relying on a fully relativistic Korringa-Kohn-Rostoker density functional theory method. In the semiclassical approach, we use the Boltzmann transport formalism and compare it directly to a fully quantum mechanical non-equilibrium Keldysh formalism. Restricting the calculations to the spin Hall induced, odd in spatial inversion, contribution in the limit of the relaxation time approximation we find good agreement between both methods, where deviations can be attributed to the complexity of Fermi surfaces. Finally, we compare our results to experimental values of the spin accumulation at surfaces as well as the Hall angle and find good agreement for the trend across the considered elements.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Surface Diffusion Control Enables Tailored Aspect Ratio Nanostructures in Area-Selective Atomic Layer Deposition
Authors:
Philip Klement,
Daniel Anders,
Lukas Gümbel,
Michele Bastianello,
Fabian Michel,
Jörg Schörmann,
Matthias T. Elm,
Christian Heiliger,
Sangam Chatterjee
Abstract:
Area-selective atomic layer deposition is a key technology for modern microelectronics as it eliminates alignment errors inherent to conventional approaches by enabling material deposition only in specific areas. Typically, the selectivity originates from surface modifications of the substrate that allow or block precursor adsorption. The control of the deposition process currently remains a major…
▽ More
Area-selective atomic layer deposition is a key technology for modern microelectronics as it eliminates alignment errors inherent to conventional approaches by enabling material deposition only in specific areas. Typically, the selectivity originates from surface modifications of the substrate that allow or block precursor adsorption. The control of the deposition process currently remains a major challenge as the selectivity of the no-growth areas is lost quickly. Here, we show that surface modifications of the substrate strongly manipulate the surface diffusion. The selective deposition of TiO$_2$ on poly (methyl methacrylate) and SiO$_2$ yields localized nanostructures with tailored aspect ratios. Controlling the surface diffusion allows to tune such nanostructures as it boosts the growth rate at the interface of the growth and no-growth areas. Kinetic Monte-Carlo calculations reveal that species move from high to low diffusion areas. Further, we identify the catalytic activity of TiCl$_4$ during the formation of carboxylic acid on poly (methyl methacrylate) as the reaction mechanism responsible for the loss of selectivity, and show that process optimization leads to higher selectivity. Our work enables the precise control of area-selective atomic layer deposition on the nanoscale, and offers new strategies in area-selective deposition processes by exploiting surface diffusion effects.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Skyrmion meets magnetic tunnel junction: an efficient way for electrical skyrmion detection investigated by ab initio theory
Authors:
Jonas Friedrich Schäfer-Richarz,
Philipp Risius,
Michael Czerner,
Christian Heiliger
Abstract:
In our proof-of-principle study we examine the influence of skyrmions on magnetoresistive transport. In particular, we show that magnetic tunnel junctions are a technologically appealing and promising way for electrical detection of non-collinear magnetic structures. The calculated effect is shown to originate from scattering between different k-states and cannot be identified through densities of…
▽ More
In our proof-of-principle study we examine the influence of skyrmions on magnetoresistive transport. In particular, we show that magnetic tunnel junctions are a technologically appealing and promising way for electrical detection of non-collinear magnetic structures. The calculated effect is shown to originate from scattering between different k-states and cannot be identified through densities of states alone. Our results suggest that the detection efficiency strongly depends on the utilized materials.
△ Less
Submitted 10 July, 2019; v1 submitted 29 January, 2019;
originally announced January 2019.
-
Tunnel magneto-Seebeck effect
Authors:
Timo Kuschel,
Michael Czerner,
Jakob Walowski,
Andy Thomas,
Hans Werner Schumacher,
Günter Reiss,
Christian Heiliger,
Markus Münzenberg
Abstract:
The interplay of charge, spin and heat transport is investigated in the fascinating research field of spin caloritronics, the marriage of spintronics and thermoelectrics. Here, many new spin-dependent thermal transport phenomena in magnetic nanostructures have been explored in the recent years. One of them is the tunnel magneto-Seebeck (TMS) effect in magnetic tunnel junctions (MTJs) that has larg…
▽ More
The interplay of charge, spin and heat transport is investigated in the fascinating research field of spin caloritronics, the marriage of spintronics and thermoelectrics. Here, many new spin-dependent thermal transport phenomena in magnetic nanostructures have been explored in the recent years. One of them is the tunnel magneto-Seebeck (TMS) effect in magnetic tunnel junctions (MTJs) that has large potential for future nanoelectronic devices, such as nanostructured sensors for three-dimentional thermal gradients, or scanning tunneling microscopes driven by temperature differences. The TMS describes the dependence of the MTJ's thermopower on its magnetic cofiguration when a thermal gradient is applied. In this review, we highlight the successful way from first observation of the TMS in 2011 to current ongoing developments in this research area. We emphasize on different heating techniques, material designs, applications, and additional physical aspects such as the role of the thermal conductivity of the barrier material. We further demonstrate the efficient interplay between ab initio calculations and experiments within this field, as this has led, e.g., to the detection of large TMS ratios in MTJs with half-metallic Heusler electrodes.
△ Less
Submitted 6 November, 2018; v1 submitted 16 August, 2018;
originally announced August 2018.
-
Large magneto-Seebeck effect in magnetic tunnel junctions with half-metallic Heusler electrodes
Authors:
Alexander Boehnke,
Ulrike Martens,
Christian Sterwerf,
Alessia Niesen,
Torsten Huebner,
Marvin von der Ehe,
Markus Meinert,
Timo Kuschel,
Andy Thomas,
Christian Heiliger,
Markus Münzenberg,
Günter Reiss
Abstract:
Spin caloritronics studies the interplay between charge-, heat- and spin-currents, which are initiated by temperature gradients in magnetic nanostructures. A plethora of new phenomena has been discovered that promises, e.g., to make wasted heat in electronic devices useable or to provide new read-out mechanisms for information. However, only few materials have been studied so far with Seebeck volt…
▽ More
Spin caloritronics studies the interplay between charge-, heat- and spin-currents, which are initiated by temperature gradients in magnetic nanostructures. A plethora of new phenomena has been discovered that promises, e.g., to make wasted heat in electronic devices useable or to provide new read-out mechanisms for information. However, only few materials have been studied so far with Seebeck voltages of only some μV, which hampers applications. Here, we demonstrate that half-metallic Heusler compounds are hot candidates for enhancing spin-dependent thermoelectric effects. This becomes evident when considering the asymmetry of the spin-split density of electronic states around the Fermi level that determines the spin-dependent thermoelectric transport in magnetic tunnel junctions. We identify Co$_2$FeAl and Co$_2$FeSi Heusler compounds as ideal due to their energy gaps in the minority density of states, and demonstrate devices with substantially larger Seebeck voltages and tunnel magneto-Seebeck effect ratios than the commonly used Co-Fe-B based junctions.
△ Less
Submitted 20 November, 2017; v1 submitted 3 July, 2017;
originally announced July 2017.
-
Enhancement of thermovoltage and tunnel magneto-Seebeck effect in CoFeB based magnetic tunnel junctions by variation of the MgAl$_2$O$_4$ and MgO barrier thickness
Authors:
Torsten Huebner,
Ulrike Martens,
Jakob Walowski,
Alexander Boehnke,
Jan Krieft,
Christian Heiliger,
Andy Thomas,
Günter Reiss,
Timo Kuschel,
Markus Münzenberg
Abstract:
We investigate the influence of the barrier thickness of Co$_{40}$Fe$_{40}$B$_{20}$ based magnetic tunnel junctions on the laser-induced tunnel magneto-Seebeck effect. Varying the barrier thickness from 1nm to 3nm, we find a distinct maximum in the tunnel magneto-Seebeck effect for 2.6nm barrier thickness. This maximum is independently measured for two barrier materials, namely MgAl$_2$O$_4$ and M…
▽ More
We investigate the influence of the barrier thickness of Co$_{40}$Fe$_{40}$B$_{20}$ based magnetic tunnel junctions on the laser-induced tunnel magneto-Seebeck effect. Varying the barrier thickness from 1nm to 3nm, we find a distinct maximum in the tunnel magneto-Seebeck effect for 2.6nm barrier thickness. This maximum is independently measured for two barrier materials, namely MgAl$_2$O$_4$ and MgO. Additionally, samples with an MgAl$_2$O$_4$ barrier exhibit a high thermovoltage of more than 350$μ$V in comparison to 90$μ$V for the MTJs with MgO barrier when heated with the maximum laser power of 150mW. Our results allow for the fabrication of improved stacks when dealing with temperature differences across magnetic tunnel junctions for future applications in spin caloritronics, the emerging research field that combines spintronics and themoelectrics.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Coherent ultrafast spin-dynamics probed in three dimensional topological insulators
Authors:
F. Boschini,
M. Mansurova,
G. Mussler,
J. Kampmeier,
D. Grützmacher,
L. Braun,
F. Katmis,
J. S. Moodera,
C. Dallera,
E. Carpene,
C. Franz,
M. Czerner,
C. Heiliger,
T. Kampfrath,
M. Münzenberg
Abstract:
Topological insulators are candidates to open up a novel route in spin based electronics. Different to traditional ferromagnetic materials, where the carrier spin-polarization and magnetization are based on the exchange interaction, the spin properties in topological insulators are based on the coupling of spin- and orbit interaction connected to its momentum. Specific ways to control the spin-pol…
▽ More
Topological insulators are candidates to open up a novel route in spin based electronics. Different to traditional ferromagnetic materials, where the carrier spin-polarization and magnetization are based on the exchange interaction, the spin properties in topological insulators are based on the coupling of spin- and orbit interaction connected to its momentum. Specific ways to control the spin-polarization with light have been demonstrated: the energy momentum landscape of the Dirac cone provides spin-momentum locking of the charge current and its spin. The directionality of spin and momentum, as well as control with light has been demonstrated. Here we demonstrate a coherent femtosecond control of spin-polarization for states in the valence band at around the Dirac cone.
△ Less
Submitted 8 June, 2015;
originally announced June 2015.
-
Thermal transport and non-equilibrium temperature drop across a magnetic nanostructured interface
Authors:
Jia Zhang,
Michael Bachman,
Michael Czerner,
Christian Heiliger
Abstract:
In a number of current experiments in the field of spin-caloritronics a temperature gradient across a nanostructured interface is applied and spin-dependent transport phenomena are observed. However, a lack in the interpretation and knowledge let it unclear how the temperature drop across a magnetic nanostructured interface looks like where both phonons and electrons may contribute to thermal tran…
▽ More
In a number of current experiments in the field of spin-caloritronics a temperature gradient across a nanostructured interface is applied and spin-dependent transport phenomena are observed. However, a lack in the interpretation and knowledge let it unclear how the temperature drop across a magnetic nanostructured interface looks like where both phonons and electrons may contribute to thermal transport. We answer this question for the case of a magnetic tunnel junction (MTJ) where the tunneling magneto Seebeck effect occurs. Nevertheless, our results can be extended to other nanostructured interfaces as well. Using an \textit{ab initio} method we explicitly calculate phonon and electron thermal conductance across the Fe/MgO/Fe-MTJs by using Green's function method. Further, by estimating the electron-phonon interaction in the Fe leads we are able to calculate the electron and phonon temperature profile across the Fe/MgO/Fe-MTJ. Our results show that there is an electron-phonon temperature imbalance at the Fe-MgO interfaces. In consequence, a revision of the interpretation of current experimental measurements might be necessary.
△ Less
Submitted 23 April, 2015; v1 submitted 22 March, 2015;
originally announced March 2015.
-
On/off switching of bit readout in bias-enhanced tunnel magneto-Seebeck effect
Authors:
Alexander Boehnke,
Marius Milnikel,
Marvin Walter,
Vladyslav Zbarsky,
Christian Franz,
Michael Czerner,
Karsten Rott,
Andy Thomas,
Christian Heiliger,
Markus Münzenberg,
Günter Reiss
Abstract:
Thermoelectric effects in magnetic tunnel junctions are currently an attractive research topic. Here, we demonstrate that the tunnel magneto-Seebeck effect (TMS) in CoFeB/MgO/CoFeB tunnel junctions can be switched on to a logic 1 state and off to 0 by simply changing the magnetic state of the CoFeB electrodes. We enable this new functionality of magnetic tunnel junctions by combining a thermal gra…
▽ More
Thermoelectric effects in magnetic tunnel junctions are currently an attractive research topic. Here, we demonstrate that the tunnel magneto-Seebeck effect (TMS) in CoFeB/MgO/CoFeB tunnel junctions can be switched on to a logic 1 state and off to 0 by simply changing the magnetic state of the CoFeB electrodes. We enable this new functionality of magnetic tunnel junctions by combining a thermal gradient and an electric field. This new technique unveils the bias-enhanced tunnel magneto-Seebeck effect, which can serve as the basis for logic devices or memories in a green information technology with a pure thermal write and read process. Furthermore, the thermally generated voltages that are referred to as the Seebeck effect are well known to sensitively depend on the electronic structure and therefore have been valued in solid-state physics for nearly one hundred years. Here, we lift Seebeck's historic discovery from 1821 to a new level of current spintronics. Our results show that the signal crosses zero and can be adjusted by tuning a bias voltage that is applied between the electrodes of the junction; hence, the name of the effect is bias-enhanced tunnel magneto-Seebeck effect (bTMS). Via the spin- and energy-dependent transmission of electrons in the junction, the bTMS effect can be configured using the bias voltage with much higher control than the tunnel magnetoresistance (TMR) and even completely suppressed for only one magnetic configuration, which is either parallel (P) or anti-parallel (AP). This option allows a readout contrast for the magnetic information of -3000% at room temperature while maintaining a large signal for one magnetic orientation. This contrast is much larger than the value that can be obtained using the TMR effect. Moreover, our measurements are a step towards the experimental realization of high TMS ratios, which are predicted for specific Co-Fe compositions.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Unusual angular dependence of tunneling magneto-Seebeck effect
Authors:
Christian Heiliger,
Michael Czerner,
Niklas Liebing,
Santiago Serrano-Guisan,
Karsten Rott,
Günter Reiss,
Hans W. Schumacher
Abstract:
We find an unusual angular dependence of the tunneling magneto-Seebeck effect (TMS). The conductance shows normally a cosine-dependence with the angle between the magnetizations of the two ferromagnetic leads. In contrast, the angular dependence of the TMS depends strongly on the tunneling magneto resistance (TMR) ratio. For small TMR ratios we obtain also a cosine-dependence whereas for very larg…
▽ More
We find an unusual angular dependence of the tunneling magneto-Seebeck effect (TMS). The conductance shows normally a cosine-dependence with the angle between the magnetizations of the two ferromagnetic leads. In contrast, the angular dependence of the TMS depends strongly on the tunneling magneto resistance (TMR) ratio. For small TMR ratios we obtain also a cosine-dependence whereas for very large TMR ratios the angular dependence approaches a step-like function.
△ Less
Submitted 12 November, 2013;
originally announced November 2013.
-
Thermal spin-transfer torque in magnetic tunnel junctions
Authors:
Christian Heiliger,
Michael Czerner
Abstract:
The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering $\text{Fe}_\text{x}\text{Co}_{\text{1-x}}$ alloys. Further, we compare the TSTT to the bias voltage driven STT and disc…
▽ More
The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering $\text{Fe}_\text{x}\text{Co}_{\text{1-x}}$ alloys. Further, we compare the TSTT to the bias voltage driven STT and discuss the requirements for a possible thermal switching. For example, only for very thin barriers of 3 monolayers MgO a thermal switching is imaginable. However, even for such a thin barrier the TSTT is still too small for switching at the moment and further optimization is needed. In particular, the TSTT strongly depends on the composition of the ferromagentic layer. In our current study it turns out that at the chosen thickness of the ferromagnetic layer pure Fe gives the highest thermal spin-transfer torque.
△ Less
Submitted 6 November, 2013;
originally announced November 2013.
-
Band Structure and Effective Masses of ZnMgO
Authors:
Christian Franz,
Marcel Giar,
Markus Heinemann,
Michael Czerner,
Christian Heiliger
Abstract:
We analyze the influence of the Mg concentration on several important properties of the band structure of ZnMgO alloys in wurtzite structure using ab initio calculations. For this purpose, the band structure for finite concentrations is defined in terms of the Bloch spectral density, which can be calculated within the coherent potential approximation. We investigate the concentration dependence of…
▽ More
We analyze the influence of the Mg concentration on several important properties of the band structure of ZnMgO alloys in wurtzite structure using ab initio calculations. For this purpose, the band structure for finite concentrations is defined in terms of the Bloch spectral density, which can be calculated within the coherent potential approximation. We investigate the concentration dependence of the band gap and the crystal-field splitting of the valence bands. The effective electron and hole masses are determined by extending the effective mass model to finite concentrations. We compare our results with experimental results and other calculations.
△ Less
Submitted 16 July, 2013;
originally announced July 2013.
-
Influence of the magnetic material on tunneling magnetoresistance and spin-transfer torque in tunnel junctions: Ab initio studies
Authors:
Christian Franz,
Michael Czerner,
Christian Heiliger
Abstract:
The dependence of tunneling magnetoresistance and spin-transfer torque in FeCo/MgO/FeCo tunnel junctions on the Co concentration and the bias voltage are investigated ab initio. We find that the tunneling magnetoresistance decreases with the Co concentration in contradiction with previous calculations but in agreement with recent experiments. This dependence is explained from bulk properties of th…
▽ More
The dependence of tunneling magnetoresistance and spin-transfer torque in FeCo/MgO/FeCo tunnel junctions on the Co concentration and the bias voltage are investigated ab initio. We find that the tunneling magnetoresistance decreases with the Co concentration in contradiction with previous calculations but in agreement with recent experiments. This dependence is explained from bulk properties of the alloys. By using a realistic description of the disorder in the alloys we can show that even small amounts of disorder lead to a drastic drop in the tunneling magnetoresistance. This provides a quantitative explanation of the difference between calculated and measured values.
The spin-transfer torque shows a linear voltage dependence for the in-plane component and a quadratic for the out-of-plane component for all concentrations at small bias voltages. In particular, the linear slope of the in-plane torque is independent of the concentration. For high bias voltages the in-plane torque shows a strong nonlinear deviation from the linear slope for high Co concentrations. This is explained from the same effects which govern the tunneling magnetoresistance.
△ Less
Submitted 27 June, 2013;
originally announced June 2013.
-
Implementation of non-equilibrium vertex corrections in KKR: transport through disordered layers
Authors:
Christian Franz,
Michael Czerner,
Christian Heiliger
Abstract:
The theoretical description of modern nanoelectronic devices requires a quantum mechanical treatment and often involves disorder, e.g. form alloys. Therefore, the ab initio theory of transport using non-equilibrium Green's functions is extended to the case of disorder described by the coherent potential approximation. This requires the calculation of non-equilibrium vertex corrections. We implemen…
▽ More
The theoretical description of modern nanoelectronic devices requires a quantum mechanical treatment and often involves disorder, e.g. form alloys. Therefore, the ab initio theory of transport using non-equilibrium Green's functions is extended to the case of disorder described by the coherent potential approximation. This requires the calculation of non-equilibrium vertex corrections. We implement the vertex corrections in a Korringa-Kohn-Rostoker multiple scattering scheme. In order to verify our implementation and to demonstrate the accuracy and applicability we investigate a system of an iron-cobalt alloy layer embedded in copper. The results obtained with the coherent potential approximation are compared to supercell calculations. It turns out that vertex corrections play an important role for this system.
△ Less
Submitted 10 May, 2013;
originally announced May 2013.
-
Ab initio studies of the tunneling magneto-Seebeck effect: influence of magnetic material
Authors:
Christian Heiliger,
Christian Franz,
Michael Czerner
Abstract:
We found a strong influence of the composition of the magnetic material on the temperature dependence of the tunneling magneto-Seebeck effect in $MgO$ based tunnel junctions. We use \textit{ab initio} alloy theory to consider different $Fe_xCo_{1-x}$ alloys for the ferromagnetic layer. Even a small change of the composition leads to strong changes in the magnitude or even in the sign of the tunnel…
▽ More
We found a strong influence of the composition of the magnetic material on the temperature dependence of the tunneling magneto-Seebeck effect in $MgO$ based tunnel junctions. We use \textit{ab initio} alloy theory to consider different $Fe_xCo_{1-x}$ alloys for the ferromagnetic layer. Even a small change of the composition leads to strong changes in the magnitude or even in the sign of the tunneling magneto-Seebeck effect. This can explain differences between recent experimental results. In addition, changing the barrier thickness from six to ten monolayers of $MgO$ leads also to a non-trivial change of the temperature dependence. Our results emphasize that the tunneling magneto-Seebeck effect depends very crucially and is very sensitive to material parameters and show that further experimental and theoretical investigations are necessary.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
Parameter space for thermal spin-transfer torque
Authors:
Johannes Christian Leutenantsmeyer,
Marvin Walter,
Vladyslav Zbarsky,
Markus Münzenberg,
Rashid Gareev,
Karsten Rott,
Andy Thomas,
Günter Reiss,
Patrick Peretzki,
Henning Schuhmann,
Michael Seibt,
Michael Czerner,
Christian Heiliger
Abstract:
Thermal spin-transfer torque describes the manipulation of the magnetization by the application of a heat flow. The effect has been calculated theoretically by Jia et al. in 2011. It is found to require large temperature gradients in the order of Kelvins across an ultra thin MgO barrier. In this paper, we present results on the fabrication and the characterization of magnetic tunnel junctions with…
▽ More
Thermal spin-transfer torque describes the manipulation of the magnetization by the application of a heat flow. The effect has been calculated theoretically by Jia et al. in 2011. It is found to require large temperature gradients in the order of Kelvins across an ultra thin MgO barrier. In this paper, we present results on the fabrication and the characterization of magnetic tunnel junctions with 3 monolayer thin MgO barriers. The quality of the interfaces at different growth conditions is studied quantitatively via high-resolution transmission electron microscopy imaging. We demonstrate tunneling magneto resistance ratios of up to 55% to 64% for 3 to 4 monolayer barrier thickness. Magnetic tunnel junctions with perpendicular magnetization anisotropy show spin-transfer torque switching with a critical current of 0.2 MA/cm$^2$. The thermally generated torque is calculated ab initio using the Korringa-Kohn-Rostoker and non-equilibrium Green's function method. Temperature gradients generated from femtosecond laser pulses were simulated using COMSOL, revealing gradients of 20 K enabling thermal spin-transfer-torque switching.
△ Less
Submitted 17 March, 2013; v1 submitted 10 January, 2013;
originally announced January 2013.
-
Atomistic Green's Function Method supported by ab initio Calculations : Application to phonon transport in ZnO and ZnS
Authors:
M. Bachmann,
M. Czerner,
S. Edaldati-Boostan,
C. Heiliger
Abstract:
We present an approach to calculate ballistic phonon transport that combines the atomistic Green's function (AGF) method with ab initio results. For the inter atomic potential we use the harmonic approach. The equilibrium positions of the atoms and the inter atomic force constants(ifcs) are calculated using the ABINIT program package, which is based on density functional theory. Therefore, the pre…
▽ More
We present an approach to calculate ballistic phonon transport that combines the atomistic Green's function (AGF) method with ab initio results. For the inter atomic potential we use the harmonic approach. The equilibrium positions of the atoms and the inter atomic force constants(ifcs) are calculated using the ABINIT program package, which is based on density functional theory. Therefore, the presented approach is parameter free. From the Green's function of the system we determine the density of states as well as the transmission function. The thermal conductance is obtained within the linear response regime. We apply this approach to bulk ZnO and bulk ZnS. Transmission functions for different transport direction for each material are presented. A comparison of the transmission function shows, that a ZnO/ZnS interface could be a promising phonon blocker. Adding such interfaces in ZnO or ZnS based thermoelectric devices could therefore increase the figure of merit.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
-
Spin caloritronics in magnetic tunnel junctions: Ab initio studies
Authors:
Michael Czerner,
Michael Bachmann,
Christian Heiliger
Abstract:
This Letter presents ab initio calculations of the magneto-thermoelectric power (MTEP) and of the spin-Seebeck coefficient in MgO based tunnel junctions with Fe and Co leads. In addition, the normal thermopower is calculated and gives for pure Fe and Co an quantitative agreement with experiments. Consequently, the calculated values in tunnel junctions are a good estimation of upper limits. In part…
▽ More
This Letter presents ab initio calculations of the magneto-thermoelectric power (MTEP) and of the spin-Seebeck coefficient in MgO based tunnel junctions with Fe and Co leads. In addition, the normal thermopower is calculated and gives for pure Fe and Co an quantitative agreement with experiments. Consequently, the calculated values in tunnel junctions are a good estimation of upper limits. In particular, spin-Seebeck coefficients of more than 100 μV/K are possible. The MTEP ratio exceed several 1000% and depends strongly on temperature. In the case of Fe leads the MTEP ratio diverges even to infinity at certain temperatures. The spin-Seebeck coefficient as a function of temperature shows a non-trivial dependence. For Fe/MgO/Fe even the sign of the coefficient changes with temperature.
△ Less
Submitted 10 April, 2011;
originally announced April 2011.
-
Seebeck Effect in Magnetic Tunnel Junctions
Authors:
Marvin Walter,
Jakob Walowski,
Vladyslav Zbarsky,
Markus Münzenberg,
Markus Schäfers,
Daniel Ebke,
Günter Reiss,
Andy Thomas,
Patrick Peretzki,
Michael Seibt,
Jagadeesh S. Moodera,
Michael Czerner,
Michael Bachmann,
Christian Heiliger
Abstract:
Creating temperature gradients in magnetic nanostructures has resulted in a new research direction, i.e., the combination of magneto- and thermoelectric effects. Here, we demonstrate the observation of one important effect of this class: the magneto-Seebeck effect. It is observed when a magnetic configuration changes the charge based Seebeck coefficient. In particular, the Seebeck coefficient chan…
▽ More
Creating temperature gradients in magnetic nanostructures has resulted in a new research direction, i.e., the combination of magneto- and thermoelectric effects. Here, we demonstrate the observation of one important effect of this class: the magneto-Seebeck effect. It is observed when a magnetic configuration changes the charge based Seebeck coefficient. In particular, the Seebeck coefficient changes during the transition from a parallel to an antiparallel magnetic configuration in a tunnel junction. In that respect, it is the analog to the tunneling magnetoresistance. The Seebeck coefficients in parallel and antiparallel configuration are in the order of the voltages known from the charge-Seebeck effect. The size and sign of the effect can be controlled by the composition of the electrodes' atomic layers adjacent to the barrier and the temperature. Experimentally, we realized 8.8 % magneto-Seebeck effect, which results from a voltage change of about -8.7 μV/K from the antiparallel to the parallel direction close to the predicted value of -12.1 μV/K.
△ Less
Submitted 11 July, 2011; v1 submitted 10 April, 2011;
originally announced April 2011.
-
Bias dependence of magnetic exchange interactions: application to interlayer exchange coupling in spin valves
Authors:
Paul M. Haney,
Christian Heiliger,
Mark D. Stiles
Abstract:
We study how a bias voltage changes magnetic exchange interactions. We derive a general expression for magnetic exchange interactions for systems coupled to reservoirs under a bias potential, and apply it to spin valves. We find that for metallic systems, the interlayer exchange coupling shows a weak, oscillatory dependence on the bias potential. For tunneling systems, we find a quadratic depend…
▽ More
We study how a bias voltage changes magnetic exchange interactions. We derive a general expression for magnetic exchange interactions for systems coupled to reservoirs under a bias potential, and apply it to spin valves. We find that for metallic systems, the interlayer exchange coupling shows a weak, oscillatory dependence on the bias potential. For tunneling systems, we find a quadratic dependence on the bias potential, and derive an approximate expression for this bias dependence for a toy model. We give general conditions for when the interlayer exchange coupling is a quadratic function of bias potential.
△ Less
Submitted 25 September, 2008;
originally announced September 2008.
-
Ab initio studies of the spin-transfer torque in tunnel junctions
Authors:
Christian Heiliger,
M. D. Stiles
Abstract:
We calculate the spin-transfer torque in Fe/MgO/Fe tunnel junctions and compare the results to those for all-metallic junctions. We show that the spin-transfer torque is interfacial in the ferromagnetic layer to a greater degree than in all-metallic junctions. This result originates in the half metallic behavior of Fe for the $Δ_1$ states at the Brillouin zone center; in contrast to all-metallic…
▽ More
We calculate the spin-transfer torque in Fe/MgO/Fe tunnel junctions and compare the results to those for all-metallic junctions. We show that the spin-transfer torque is interfacial in the ferromagnetic layer to a greater degree than in all-metallic junctions. This result originates in the half metallic behavior of Fe for the $Δ_1$ states at the Brillouin zone center; in contrast to all-metallic structures, dephasing does not play an important role. We further show that it is possible to get a component of the torque that is out of the plane of the magnetizations and that is linear in the bias. However, observation of such a torque requires highly ideal samples. In samples with typical interfacial roughness, the torque is similar to that in all-metallic multilayers, although for different reasons.
△ Less
Submitted 28 November, 2007;
originally announced November 2007.
-
Implementation of a non-equilibrium Green's function method to calculate spin transfer torque
Authors:
Christian Heiliger,
Michael Czerner,
Bogdan Yu. Yavorsky,
Ingrid Mertig,
Mark D. Stiles
Abstract:
We present an implementation of the steady state Keldysh approach in a Green's function multiple scattering scheme to calculate the non-equilibrium spin density. This density is used to obtain the spin transfer torque in junctions showing the magnetoresistance effect. We use our implementation to study the spin transfer torque in metallic Co/Cu/Co junctions.
We present an implementation of the steady state Keldysh approach in a Green's function multiple scattering scheme to calculate the non-equilibrium spin density. This density is used to obtain the spin transfer torque in junctions showing the magnetoresistance effect. We use our implementation to study the spin transfer torque in metallic Co/Cu/Co junctions.
△ Less
Submitted 13 February, 2008; v1 submitted 13 November, 2007;
originally announced November 2007.
