-
Development of an aqueous lignin mixture thermophysical model for hydrothermal liquefaction applications using uncertainty quantification tools
Authors:
A. Dinis S. Nunes,
José Sierra-Pallares,
Khanh-Quang Tran,
R. Jason Hearst
Abstract:
A thermophysical model is developed that can predict the properties of two lignin mixtures, black liquor and lignosulfonates, up to 50% mass fractions, at hydrothermal conditions. An uncertainty quantification framework linked with classic thermodynamical modelling was included to account for the extreme variability of the raw material. An idealized flow simulation verified the model, where hot co…
▽ More
A thermophysical model is developed that can predict the properties of two lignin mixtures, black liquor and lignosulfonates, up to 50% mass fractions, at hydrothermal conditions. An uncertainty quantification framework linked with classic thermodynamical modelling was included to account for the extreme variability of the raw material. An idealized flow simulation verified the model, where hot compressed water mixes with a cold, aqueous lignin stream in a T-piece reactor configuration. The uncertainty quantification procedure determined that density and heat capacity uncertainty significantly influence residence time, and viscosity uncertainty mainly affects mixing. Micromixing time is five-fold and ten-fold higher for black liquor and lignosulfonates mixtures, respectively, compared to pure water mixing. The uncertainty in all simulated quantities of interest caused by the thermophysical model is reduced by increasing flow rates. This study predicted chemical reactor behaviour under varying thermophysical conditions and their final effect in terms of confidence intervals.
△ Less
Submitted 25 February, 2022; v1 submitted 13 January, 2022;
originally announced January 2022.
-
Characterizing the surface texture of a dense suspension undergoing dynamic jamming
Authors:
Olav Rømcke,
Ivo R. Peters,
R. Jason Hearst
Abstract:
Measurements of the surface velocity and surface texture of a freely propagating shear jamming front in a dense suspension are compared. The velocity fields are captured with particle image velocimetry (PIV), while the surface texture is captured in a separated experiment by observing a direct reflection on the suspension surface with high-speed cameras. A method for quantifying the surface featur…
▽ More
Measurements of the surface velocity and surface texture of a freely propagating shear jamming front in a dense suspension are compared. The velocity fields are captured with particle image velocimetry (PIV), while the surface texture is captured in a separated experiment by observing a direct reflection on the suspension surface with high-speed cameras. A method for quantifying the surface features and their orientation is presented based on the fast Fourier transform of localised windows. The region that exhibits strong surface features corresponds to the the solid-like jammed region identified via the PIV measurements. Moreover, the surface features within the jammed region are predominantly oriented in the same direction as the eigenvectors of the strain tensor. Thus, from images of the free surface, our analysis is able to show that the surface texture contains information on the principle strain directions and the propagation of the jamming front.
△ Less
Submitted 3 September, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Collision of Dynamic Jamming Fronts in a Dense Suspension
Authors:
Olav Ro mcke,
Ivo R. Peters,
R. Jason Hearst
Abstract:
Dynamic jamming is a phenomenon whereby a dense suspension switches from a fluid-like to a solid-like state when subjected to sufficient stress and deformation. Large enough systems show that this transition is accompanied by a distinct jamming front. We present an experimental study where two jamming fronts are created simultaneously using two cylinders moving in parallel. We focus our observatio…
▽ More
Dynamic jamming is a phenomenon whereby a dense suspension switches from a fluid-like to a solid-like state when subjected to sufficient stress and deformation. Large enough systems show that this transition is accompanied by a distinct jamming front. We present an experimental study where two jamming fronts are created simultaneously using two cylinders moving in parallel. We focus our observations on the collision of the jammed regions when the two fronts meet. Surprisingly, our measurements, combining surface texture visualization and time-resolved particle image velocimetry, show the formation of an unjammed region contained within the otherwise jammed suspension.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.
-
Getting jammed in all directions: Dynamic shear jamming around a cylinder towed through a dense suspension
Authors:
Olav Rømcke,
Ivo R. Peters,
R. Jason Hearst
Abstract:
Experimental results of towing a cylinder through a dense suspension of cornstarch and sucrose-water are presented. Focus is placed on the jamming fronts that exist in such systems. The literature has concentrated on the propagation of the jammed region under pushing, pulling or shearing conditions independently. How the different fronts interact and if the fronts are symmetric when generated simu…
▽ More
Experimental results of towing a cylinder through a dense suspension of cornstarch and sucrose-water are presented. Focus is placed on the jamming fronts that exist in such systems. The literature has concentrated on the propagation of the jammed region under pushing, pulling or shearing conditions independently. How the different fronts interact and if the fronts are symmetric when generated simultaneously has remained unexplored. Investigating this is our main goal. With the current setup, we are able to view a continuous, quasi-2D field around the cylinder. As such, a new way of generating jamming fronts is presented whereby pushing, pulling and shearing can be examined simultaneously. In agreement with previous studies, the front propagates roughly twice as fast in the longitudinal direction compared to the transverse direction, which is attributed to a single underlying onset strain, regardless of orientation from the cylinder. Although the jamming front shows nearly perfect transverse symmetry, there is clear longitudinal asymmetry. This is evident in the velocity and strain fields, and is also detectable in the front propagation velocity and onset strain.
△ Less
Submitted 11 June, 2021; v1 submitted 3 April, 2020;
originally announced April 2020.