-
First Light Results from the Hermes Spectrograph at the AAT
Authors:
Andrew Sheinis,
Borja Anguiano,
Martin Asplund,
Carlos Bacigalupo,
Sam Barden,
Michael Birchall,
Joss Bland-Hawthorn,
Jurek Brzeski,
Russell Cannon,
Daniela Carollo,
Scott Case,
Andrew Casey,
Vladimir Churilov,
Couch Warrick,
Robert Dean,
Gayandhi De Silva,
Valentina D'Orazi,
Ly Duong,
Tony Farrell,
Kristin Fiegert,
Kenneth Freeman,
Frost Gabriella,
Luke Gers,
Michael Goodwin,
Doug Gray
, et al. (38 additional authors not shown)
Abstract:
The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstru…
▽ More
The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V ?= 14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.
△ Less
Submitted 31 August, 2015;
originally announced September 2015.
-
First Science with SAMI: A Serendipitously Discovered Galactic Wind in ESO 185-G031
Authors:
Lisa M. R. Fogarty,
Joss Bland-Hawthorn,
Scott M. Croom,
Andrew W. Green,
Julia J. Bryant,
Jon S. Lawrence,
Samuel Richards,
James T. Allen,
Amanda E. Bauer,
Michael N. Birchall,
Sarah Brough,
Matthew Colless,
Simon C. Ellis,
Tony Farrell,
Michael Goodwin,
Ron Heald,
Andrew M. Hopkins,
Anthony Horton,
D. Heath Jones,
Steve Lee,
Geraint Lewis,
Ángel R. López-Sánchez,
Stan Miziarski,
Holly Trowland,
Sergio G. Leon-Saval
, et al. (5 additional authors not shown)
Abstract:
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found…
▽ More
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionisation and kinematic properties consistent with a large-scale galactic wind. The importance of this result is two-fold: (i) fibre bundle spectrographs are able to identify low-surface brightness emission arising from extranuclear activity; (ii) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibres and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
The Sydney-AAO Multi-object Integral field spectrograph (SAMI)
Authors:
Scott M. Croom,
Jon S. Lawrence,
Joss Bland-Hawthorn,
Julia J. Bryant,
Lisa Fogarty,
Samuel Richards,
Michael Goodwin,
Tony Farrell,
Stan Miziarski,
Ron Heald,
D. Heath Jones,
Steve Lee,
Matthew Colless,
Sarah Brough,
Andrew M. Hopkins,
Amanda E. Bauer,
Michael N. Birchall,
Simon Ellis,
Anthony Horton,
Sergio Leon-Saval,
Geraint Lewis,
A. R. Lopez-Sanchez,
Seong-Sik Min,
Christopher Trinh,
Holly Trowland
Abstract:
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabu…
▽ More
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabundle comprises 61 lightly-fused multimode fibres with reduced cladding and yields a 75 percent filling factor. Each fibre core diameter subtends 1.6 arcseconds on the sky and each hexabundle has a field of view of 15 arcseconds diameter. The fibres are fed to the flexible AAOmega double-beam spectrograph, which can be used at a range of spectral resolutions (R=lambda/delta(lambda) ~ 1700-13000) over the optical spectrum (3700-9500A). We present the first spectroscopic results obtained with SAMI for a sample of galaxies at z~0.05. We discuss the prospects of implementing hexabundles at a much higher multiplex over wider fields of view in order to carry out spatially--resolved spectroscopic surveys of 10^4 to 10^5 galaxies.
△ Less
Submitted 14 December, 2011;
originally announced December 2011.
-
Performance of AAOmega: the AAT multi-purpose fibre-fed spectrograph
Authors:
R. Sharp,
W. Saunder,
G. Smith,
V. Churilov,
D. Correll,
J. Dawson,
T. Farrel,
G. Frost,
R. Haynes,
R. Heald,
A. Lankshear,
D. Mayfield,
L. Waller,
D. Whittard
Abstract:
AAOmega is the new spectrograph for the 2dF fibre-positioning system on the Anglo-Australian Telescope. It is a bench-mounted, double-beamed design, using volume phase holographic (VPH) gratings and articulating cameras. It is fed by 392 fibres from either of the two 2dF field plates, or by the 512 fibre SPIRAL integral field unit (IFU) at Cassegrain focus. Wavelength coverage is 370 to 950nm an…
▽ More
AAOmega is the new spectrograph for the 2dF fibre-positioning system on the Anglo-Australian Telescope. It is a bench-mounted, double-beamed design, using volume phase holographic (VPH) gratings and articulating cameras. It is fed by 392 fibres from either of the two 2dF field plates, or by the 512 fibre SPIRAL integral field unit (IFU) at Cassegrain focus. Wavelength coverage is 370 to 950nm and spectral resolution 1,000-8,000 in multi-Object mode, or 1,500-10,000 in IFU mode. Multi-object mode was commissioned in January 2006 and the IFU system will be commissioned in June 2006.
The spectrograph is located off the telescope in a thermally isolated room and the 2dF fibres have been replaced by new 38m broadband fibres. Despite the increased fibre length, we have achieved a large increase in throughput by use of VPH gratings, more efficient coatings and new detectors - amounting to a factor of at least 2 in the red. The number of spectral resolution elements and the maximum resolution are both more than doubled, and the stability is an order of magnitude better.
The spectrograph comprises: an f/3.15 Schmidt collimator, incorporating a dichroic beam-splitter; interchangeable VPH gratings; and articulating red and blue f/1.3 Schmidt cameras. Pupil size is 190mm, determined by the competing demands of cost, obstruction losses, and maximum resolution. A full suite of VPH gratings has been provided to cover resolutions 1,000 to 7,500, and up to 10,000 at particular wavelengths.
△ Less
Submitted 6 June, 2006;
originally announced June 2006.
-
Distributed Control System for the Test Interferometer of the ALMA Project
Authors:
M. Pokorny,
M. Brooks,
B. Glendenning,
G. Harris,
R. Heald,
F. Stauffer,
J. Pisano
Abstract:
The control system (TICS) for the test interferometer being built to support the development of the Atacama Large Millimeter Array (ALMA)will itself be a prototype for the final ALMA array, providing a test for the distributed control system under development. TICS will be based on the ALMA Common Software (ACS) (developed at the European Southern Observatory), which provides CORBA-based service…
▽ More
The control system (TICS) for the test interferometer being built to support the development of the Atacama Large Millimeter Array (ALMA)will itself be a prototype for the final ALMA array, providing a test for the distributed control system under development. TICS will be based on the ALMA Common Software (ACS) (developed at the European Southern Observatory), which provides CORBA-based services and a device management framework for the control software.
Simple device controllers will run on single board computers, one of which (known as an LCU) is located at each antenna; whereas complex, compound device controllers may run on centrally located computers. In either circumstance, client programs may obtain direct CORBA references to the devices and their properties. Monitor and control requests are sent to devices or properties, which then process and forward the commands to the appropriate hardware devices as required. Timing requirements are met by tagging commands with (future) timestamps synchronized to a timing pulse, which is regulated by a central reference generator, and is distributed to all hardware devices in the array. Monitoring is provided through a publish/subscribe CORBA-based service.
△ Less
Submitted 4 December, 2001; v1 submitted 8 November, 2001;
originally announced November 2001.