-
Crystallization and arrest mechanisms of model colloids
Authors:
Thomas K. Haxton,
Lester O. Hedges,
Stephen Whitelam
Abstract:
We performed dynamic simulations of spheres with short-range attractive interactions for many values of interaction strength and range. Fast crystallization occurs in a localized region of this parameter space, but the character of crystallization pathways is not uniform within this region. Pathways range from one-step, in which a crystal nucleates directly from a gas, to two-step, in which substa…
▽ More
We performed dynamic simulations of spheres with short-range attractive interactions for many values of interaction strength and range. Fast crystallization occurs in a localized region of this parameter space, but the character of crystallization pathways is not uniform within this region. Pathways range from one-step, in which a crystal nucleates directly from a gas, to two-step, in which substantial liquid-like clusters form and only subsequently become crystalline. Crystallization can fail because of slow nucleation from either gas or liquid, or because of dynamic arrest caused by strong interactions. Arrested states are characterized by the formation of networks of face-sharing tetrahedra that can be detected by a local common neighbor analysis.
△ Less
Submitted 24 July, 2015;
originally announced July 2015.
-
High-resolution coarse-grained modeling using oriented coarse-grained sites
Authors:
Thomas K. Haxton
Abstract:
We introduce a method to bring nearly atomistic resolution to coarse-grained models, and we apply the method to proteins. Using a small number of coarse-grained sites (about one per eight atoms) but assigning an independent three-dimensional orientation to each site, we preferentially integrate out stiff degrees of freedom (bond lengths and angles, as well as dihedral angles in rings) that are acc…
▽ More
We introduce a method to bring nearly atomistic resolution to coarse-grained models, and we apply the method to proteins. Using a small number of coarse-grained sites (about one per eight atoms) but assigning an independent three-dimensional orientation to each site, we preferentially integrate out stiff degrees of freedom (bond lengths and angles, as well as dihedral angles in rings) that are accurately approximated by their average values, while retaining soft degrees of freedom (unconstrained dihedral angles) mostly responsible for conformational variability. We demonstrate that our scheme retains nearly atomistic resolution by map** all experimental protein configurations in the Protein Data Bank onto coarse-grained configurations, then analytically backmap** those configurations back to all-atom configurations. This roundtrip map** throws away all information associated with the eliminated (stiff) degrees of freedom except for their average values, which we use to construct optimal backmap** functions. Despite the 4:1 reduction in the number of degrees of freedom, we find that heavy atoms move only 0.051 angstroms on average during the roundtrip map**, while hydrogens move 0.179 angstroms on average, an unprecedented combination of efficiency and accuracy among coarse-grained protein models. We discuss the advantages of such a high-resolution model for parameterizing effective interactions and accurately calculating observables through direct or multiscale simulations.
△ Less
Submitted 30 September, 2014;
originally announced September 2014.
-
Modeling sequence-specific polymers using anisotropic coarse-grained sites allows quantitative comparison with experiment
Authors:
Thomas K. Haxton,
Ranjan V. Mannige,
Ronald N. Zuckermann,
Stephen Whitelam
Abstract:
Certain sequences of peptoid polymers (synthetic analogs of peptides) assemble into bilayer nanosheets via a nonequilibrium assembly pathway of adsorption, compression, and collapse at an air-water interface. As with other large-scale dynamic processes in biology and materials science, understanding the details of this supramolecular assembly process requires a modeling approach that captures beha…
▽ More
Certain sequences of peptoid polymers (synthetic analogs of peptides) assemble into bilayer nanosheets via a nonequilibrium assembly pathway of adsorption, compression, and collapse at an air-water interface. As with other large-scale dynamic processes in biology and materials science, understanding the details of this supramolecular assembly process requires a modeling approach that captures behavior on a wide range of length and time scales, from those on which individual sidechains fluctuate to those on which assemblies of polymers evolve. Here we demonstrate that a new coarse-grained modeling approach is accurate and computationally efficient enough to do so. Our approach uses only a minimal number of coarse-grained sites, but retains independently fluctuating orientational degrees of freedom for each site. These orientational degrees of freedom allow us to accurately parameterize both bonded and nonbonded interactions, and to generate all-atom configurations with sufficient accuracy to perform atomic scattering calculations and to interface with all-atom simulations. We have used this approach to reproduce all available experimental X-ray scattering spectra (for stacked nanosheets, and for peptoids adsorbed at air-water interfaces and in solution), in order to resolve the microscopic, real-space structures responsible for these Fourier-space features. By interfacing with all-atom simulations, we have also laid the foundations for future multiscale simulations of sequence-specific polymers that communicate in both directions across scales.
△ Less
Submitted 30 September, 2014;
originally announced September 2014.
-
Competing thermodynamic and dynamic factors select molecular assemblies on a gold surface
Authors:
Thomas K. Haxton,
Hui Zhou,
Isaac Tamblyn,
Dae** Eom,
Zonghai Hu,
Jeffrey B. Neaton,
Tony F. Heinz,
Stephen Whitelam
Abstract:
Controlling the self-assembly of surface-adsorbed molecules into nanostructures requires understanding physical mechanisms that act across multiple length and time scales. By combining scanning tunneling microscopy with hierarchical ab initio and statistical mechanical modeling of 1,4-substituted benzenediamine (BDA) molecules adsorbed on a gold (111) surface, we demonstrate that apparently simple…
▽ More
Controlling the self-assembly of surface-adsorbed molecules into nanostructures requires understanding physical mechanisms that act across multiple length and time scales. By combining scanning tunneling microscopy with hierarchical ab initio and statistical mechanical modeling of 1,4-substituted benzenediamine (BDA) molecules adsorbed on a gold (111) surface, we demonstrate that apparently simple nanostructures are selected by a subtle competition of thermodynamics and dynamics. Of the collection of possible BDA nanostructures mechanically stabilized by hydrogen bonding, the interplay of intermolecular forces, surface modulation, and assembly dynamics select at low temperature a particular subset: low free energy oriented linear chains of monomers, and high free energy branched chains.
△ Less
Submitted 28 November, 2013;
originally announced November 2013.
-
Common physical framework explains phase behavior and dynamics of atomic, molecular and polymeric network-formers
Authors:
Stephen Whitelam,
Isaac Tamblyn,
Thomas K. Haxton,
Maria B. Wieland,
Neil R. Champness,
Juan P. Garrahan,
Peter H. Beton
Abstract:
We show that the self-assembly of a diverse collection of building blocks can be understood within a common physical framework. These building blocks, which form periodic honeycomb networks and nonperiodic variants thereof, range in size from atoms to micron-scale polymers, and interact through mechanisms as different as hydrogen bonds and covalent forces. A combination of statistical mechanics an…
▽ More
We show that the self-assembly of a diverse collection of building blocks can be understood within a common physical framework. These building blocks, which form periodic honeycomb networks and nonperiodic variants thereof, range in size from atoms to micron-scale polymers, and interact through mechanisms as different as hydrogen bonds and covalent forces. A combination of statistical mechanics and quantum mechanics shows that one can capture the physics that governs assembly of these networks by resolving only the geometry and strength of building block interactions. The resulting framework reproduces a broad range of phenomena seen experimentally, including periodic and nonperiodic networks in thermal equilibrium, and nonperiodic supercooled and glassy networks away from equilibrium. Our results show how simple `design criteria' control assembly of a wide variety of networks, and suggest that kinetic trap** can be a useful way of making functional assemblies.
△ Less
Submitted 24 March, 2014; v1 submitted 12 November, 2013;
originally announced November 2013.
-
Do hierarchical structures assemble best via hierarchical pathways?
Authors:
Thomas K. Haxton,
Stephen Whitelam
Abstract:
Hierarchically structured natural materials possess functionalities unattainable to the same components organized or mixed in simpler ways. For instance, the bones and teeth of mammals are far stronger and more durable than the mineral phases from which they are derived because their constituents are organized hierarchically from the molecular scale to the macroscale. Making similarly functional s…
▽ More
Hierarchically structured natural materials possess functionalities unattainable to the same components organized or mixed in simpler ways. For instance, the bones and teeth of mammals are far stronger and more durable than the mineral phases from which they are derived because their constituents are organized hierarchically from the molecular scale to the macroscale. Making similarly functional synthetic hierarchical materials will require an understanding of how to promote the self-assembly of structure on multiple lengthscales, without falling foul of numerous possible kinetic traps. Here we use computer simulation to study the self-assembly of a simple hierarchical structure, a square crystal lattice whose repeat unit is a tetramer. Although the target material is organized hierarchically, it self-assembles most reliably when its dynamic assembly pathway consists of the sequential addition of monomers to a single structure. Hierarchical dynamic pathways via dimer and tetramer intermediates are also viable modes of assembly, but result in general in lower yield: these intermediates have a stronger tendency than monomers to associate in ways not compatible with the target structure. In addition, assembly via tetramers results in a kinetic trap whereby material is sequestered in trimers that cannot combine to form the target crystal. We use analytic theory to relate dynamical pathways to the presence of equilibrium phases close in free energy to the target structure, and to identify the thermodynamic principles underpinning optimum self-assembly in this model: 1) make the free energy gap between the target phase and the most stable fluid phase of order kT, and 2) ensure that no other dense phases (liquids or close-packed solids of monomers or oligomers) or fluids of incomplete building blocks fall within this gap.
△ Less
Submitted 15 November, 2012;
originally announced November 2012.
-
Temperature-pressure scaling for air-fluidized grains on approaches to Point J
Authors:
L. J. Daniels,
T. K. Haxton,
N. Xu,
A. J. Liu,
D. J. Durian
Abstract:
We present experiments on a monolayer of air-fluidized beads in which a jamming transition is approached by increasing pressure, increasing packing fraction, and decreasing kinetic energy. This is accomplished, along with a noninvasive measurement of pressure, by tilting the system and examining behavior vs depth. We construct an equation of state and analyze relaxation time vs effective temperatu…
▽ More
We present experiments on a monolayer of air-fluidized beads in which a jamming transition is approached by increasing pressure, increasing packing fraction, and decreasing kinetic energy. This is accomplished, along with a noninvasive measurement of pressure, by tilting the system and examining behavior vs depth. We construct an equation of state and analyze relaxation time vs effective temperature. By making time and effective temperature dimensionless using factors of pressure, bead size, and bead mass, we obtain a good collapse of the data but to a functional form that differs from that of thermal hard-sphere systems. The relaxation time appears to diverge only as the effective temperature to pressure ratio goes to zero.
△ Less
Submitted 25 October, 2011;
originally announced October 2011.
-
Design rules for the self-assembly of a protein crystal
Authors:
Thomas K. Haxton,
Stephen Whitelam
Abstract:
Theories of protein crystallization based on spheres that form close-packed crystals predict optimal assembly within a `slot' of second virial coefficients and enhanced assembly near the metastable liquid-vapor critical point. However, most protein crystals are open structures stabilized by anisotropic interactions. Here, we use theory and simulation to show that assembly of one such structure is…
▽ More
Theories of protein crystallization based on spheres that form close-packed crystals predict optimal assembly within a `slot' of second virial coefficients and enhanced assembly near the metastable liquid-vapor critical point. However, most protein crystals are open structures stabilized by anisotropic interactions. Here, we use theory and simulation to show that assembly of one such structure is not predicted by the second virial coefficient or enhanced by the critical point. Instead, good assembly requires that the thermodynamic driving force be on the order of the thermal energy and that interactions be made as nonspecific as possible without promoting liquid-vapor phase separation.
△ Less
Submitted 25 October, 2011;
originally announced October 2011.
-
Map** the glassy dynamics of soft spheres onto hard-sphere behavior
Authors:
Michael Schmiedeberg,
Thomas K. Haxton,
Sidney R. Nagel,
Andrea J. Liu
Abstract:
We show that the dynamics of soft-sphere systems with purely repulsive interactions can be described by introducing an effective hard-sphere diameter determined using the Andersen-Weeks-Chandler approximation. We find that this approximation, known to describe static properties of liquids, also gives a good description of a dynamical quantity, the relaxation time, even in the vicinity of the glass…
▽ More
We show that the dynamics of soft-sphere systems with purely repulsive interactions can be described by introducing an effective hard-sphere diameter determined using the Andersen-Weeks-Chandler approximation. We find that this approximation, known to describe static properties of liquids, also gives a good description of a dynamical quantity, the relaxation time, even in the vicinity of the glass transition.
△ Less
Submitted 13 July, 2011;
originally announced July 2011.
-
Ratio of effective temperature to pressure controls the mobility of sheared hard spheres
Authors:
Thomas K. Haxton
Abstract:
Using molecular dynamics simulation, we calculate fluctuations and response for steadily sheared hard spheres over a wide range of packing fractions $φ$ and shear strain rates $γ$, using two different methods to dissipate energy. To a good approximation, shear stress and density fluctuations are related to their associated response functions by a single effective temperature $T_{eff}$ that is equa…
▽ More
Using molecular dynamics simulation, we calculate fluctuations and response for steadily sheared hard spheres over a wide range of packing fractions $φ$ and shear strain rates $γ$, using two different methods to dissipate energy. To a good approximation, shear stress and density fluctuations are related to their associated response functions by a single effective temperature $T_{eff}$ that is equal to or larger than the kinetic temperature $T_{kin}$. We find a crossover in the relationship between the relaxation time $τ$ and the the nondimensionalized effective temperature $T_{eff}/pσ^3$, where $p$ is the pressure and $σ$ is the sphere diameter. In the solid response regime, the behavior at fixed packing fraction satisfies $τγ\propto \exp(-cpσ^3/T_{eff})$, where $c$ depends weakly on $φ$, suggesting that the average local yield strain is controlled by the effective temperature in a way that is consistent with shear transformation zone theory. In the fluid response regime, the relaxation time depends on $T_{eff}/pσ^3$ as it depends on $T_{kin}/pσ^3$ in equilibrium. This regime includes both near-equilibrium conditions where $T_{eff} ~ T_{kin}$ and far-from-equilibrium conditions where $T_{eff} \ne T_{kin}$. We discuss the implications of our results for systems with soft repulsive interactions.
△ Less
Submitted 28 October, 2011; v1 submitted 18 March, 2011;
originally announced March 2011.
-
Universal Jamming Phase Diagram in the Hard-Sphere Limit
Authors:
Thomas K. Haxton,
Michael Schmiedeberg,
Andrea J. Liu
Abstract:
We present a new formulation of the jamming phase diagram for a class of glass-forming fluids consisting of spheres interacting via finite-ranged repulsions at temperature $T$, packing fraction $φ$ or pressure $p$, and applied shear stress $Σ$. We argue that the natural choice of axes for the phase diagram are the dimensionless quantities $T/pσ^3$, $pσ^3/ε$, and $Σ/p$, where $T$ is the temperature…
▽ More
We present a new formulation of the jamming phase diagram for a class of glass-forming fluids consisting of spheres interacting via finite-ranged repulsions at temperature $T$, packing fraction $φ$ or pressure $p$, and applied shear stress $Σ$. We argue that the natural choice of axes for the phase diagram are the dimensionless quantities $T/pσ^3$, $pσ^3/ε$, and $Σ/p$, where $T$ is the temperature, $p$ is the pressure, $Σ$ is the stress, $σ$ is the sphere diameter, $ε$ is the interaction energy scale, and $m$ is the sphere mass. We demonstrate that the phase diagram is universal at low $pσ^3/ε$; at low pressure, observables such as the relaxation time are insensitive to details of the interaction potential and collapse onto the values for hard spheres, provided the observables are non-dimensionalized by the pressure. We determine the shape of the jamming surface in the jamming phase diagram, organize previous results in relation to the jamming phase diagram, and discuss the significance of various limits.
△ Less
Submitted 30 November, 2010;
originally announced December 2010.
-
Kinetic Heterogeneities at Dynamical Crossovers
Authors:
T. K. Haxton,
A. J. Liu
Abstract:
We perform molecular dynamics simulations of a model glass-forming liquid to measure the size of kinetic heterogeneities, using a dynamic susceptibility $χ_{\rm ss}(a, t)$ that quantifies the number of particles whose dynamics are correlated on the length scale $a$ and time scale $t$. By measuring $χ_{\rm ss}(a, t)$ as a function of both $a$ and $t$, we locate local maxima $χ^\star$ at distances…
▽ More
We perform molecular dynamics simulations of a model glass-forming liquid to measure the size of kinetic heterogeneities, using a dynamic susceptibility $χ_{\rm ss}(a, t)$ that quantifies the number of particles whose dynamics are correlated on the length scale $a$ and time scale $t$. By measuring $χ_{\rm ss}(a, t)$ as a function of both $a$ and $t$, we locate local maxima $χ^\star$ at distances $a^\star$ and times $t^\star$. Near the dynamical glass transition, we find two types of maxima, both correlated with crossovers in the dynamical behavior: a smaller maximum corresponding to the crossover from ballistic to sub-diffusive motion, and a larger maximum corresponding to the crossover from sub-diffusive to diffusive motion. Our results indicate that kinetic heterogeneities are not necessarily signatures of an impending glass or jamming transition.
△ Less
Submitted 16 June, 2010; v1 submitted 2 February, 2010;
originally announced February 2010.
-
Equivalence of glass transition and colloidal glass transition in the hard-sphere limit
Authors:
Ning Xu,
Thomas K. Haxton,
Andrea J. Liu,
Sidney R. Nagel
Abstract:
We show that the slowing of the dynamics in simulations of several model glass-forming liquids is equivalent to the hard-sphere glass transition in the low-pressure limit. In this limit, we find universal behavior of the relaxation time by collapsing molecular-dynamics data for all systems studied onto a single curve as a function of $T/p$, the ratio of the temperature to the pressure. At higher…
▽ More
We show that the slowing of the dynamics in simulations of several model glass-forming liquids is equivalent to the hard-sphere glass transition in the low-pressure limit. In this limit, we find universal behavior of the relaxation time by collapsing molecular-dynamics data for all systems studied onto a single curve as a function of $T/p$, the ratio of the temperature to the pressure. At higher pressures, there are deviations from this universal behavior that depend on the inter-particle potential, implying that additional physical processes must enter into the dynamics of glass-formation.
△ Less
Submitted 4 October, 2009;
originally announced October 2009.
-
Activated dynamics and effective temperature in a steady state sheared glass
Authors:
Thomas K. Haxton,
Andrea J. Liu
Abstract:
We conduct nonequilibrium molecular dynamics simulations to measure the shear stress, the average inherent structure energy, and the effective temperature $T_{eff}$ of a sheared model glass as a function of bath temperature $T$ and shear strain rate. For $T$ above the glass transition temperature $T_0$, the rheology approaches a Newtonian limit and $T_{eff}$ approaches $T$ as the strain rate app…
▽ More
We conduct nonequilibrium molecular dynamics simulations to measure the shear stress, the average inherent structure energy, and the effective temperature $T_{eff}$ of a sheared model glass as a function of bath temperature $T$ and shear strain rate. For $T$ above the glass transition temperature $T_0$, the rheology approaches a Newtonian limit and $T_{eff}$ approaches $T$ as the strain rate approaches zero, while for $T<T_0$, the shear stress approaches a yield stress and $T_{eff}$ approaches a limiting value near $T_0$. In the shear-dominated regime at high $T$, high strain rate or at low $T$, we find that the shear stress and the average inherent structure energy each collapse onto a single curve as a function of $T_{eff}$. This indicates that $T_{eff}$ is controlling behavior in this regime.
△ Less
Submitted 2 October, 2007; v1 submitted 1 June, 2007;
originally announced June 2007.