-
Nanoscale rheology: Dynamic Mechanical Analysis over a broad and continuous frequency range using Photothermal Actuation Atomic Force Microscopy
Authors:
Alba R. Piacenti,
Casey Adam,
Nicholas Hawkins,
Ryan Wagner,
Jacob Seifert,
Yukinori Taniguchi,
Roger Proksch,
Sonia Contera
Abstract:
Polymeric materials are widely used in industries ranging from automotive to biomedical. Their mechanical properties play a crucial role in their application and function and arise from the nanoscale structures and interactions of their constitutive polymer molecules. Polymeric materials behave viscoelastically, i.e. their mechanical responses depend on the time scale of the measurements; quantify…
▽ More
Polymeric materials are widely used in industries ranging from automotive to biomedical. Their mechanical properties play a crucial role in their application and function and arise from the nanoscale structures and interactions of their constitutive polymer molecules. Polymeric materials behave viscoelastically, i.e. their mechanical responses depend on the time scale of the measurements; quantifying these time-dependent rheological properties at the nanoscale is relevant to develop, for example, accurate models and simulations of those materials, which are needed for advanced industrial applications. In this paper, an atomic force microscopy (AFM) method based on the photothermal actuation of an AFM cantilever is developed to quantify the nanoscale loss tangent, storage modulus, and loss modulus of polymeric materials. The method is then validated on a styrene-butadiene rubber (SBR), demonstrating the method's ability to quantify nanoscale viscoelasticity over a continuous frequency range up to five orders of magnitude (0.2 Hz to 20,200 Hz). Furthermore, this method is combined with AFM viscoelastic map** obtained with amplitude-modulation frequency-modulation (AM-FM) AFM, enabling the extension of viscoelastic quantification over an even broader frequency range, and demonstrating that the novel technique synergizes with preexisting AFM techniques for quantitative measurement of viscoelastic properties. The method presented here introduces a way to characterize the viscoelasticity of polymeric materials, and soft matter in general at the nanoscale, for any application.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Whole Slide Images based Cancer Survival Prediction using Attention Guided Deep Multiple Instance Learning Networks
Authors:
Jiawen Yao,
Xinliang Zhu,
Jitendra Jonnagaddala,
Nicholas Hawkins,
Junzhou Huang
Abstract:
Traditional image-based survival prediction models rely on discriminative patch labeling which make those methods not scalable to extend to large datasets. Recent studies have shown Multiple Instance Learning (MIL) framework is useful for histopathological images when no annotations are available in classification task. Different to the current image-based survival models that limit to key patches…
▽ More
Traditional image-based survival prediction models rely on discriminative patch labeling which make those methods not scalable to extend to large datasets. Recent studies have shown Multiple Instance Learning (MIL) framework is useful for histopathological images when no annotations are available in classification task. Different to the current image-based survival models that limit to key patches or clusters derived from Whole Slide Images (WSIs), we propose Deep Attention Multiple Instance Survival Learning (DeepAttnMISL) by introducing both siamese MI-FCN and attention-based MIL pooling to efficiently learn imaging features from the WSI and then aggregate WSI-level information to patient-level. Attention-based aggregation is more flexible and adaptive than aggregation techniques in recent survival models. We evaluated our methods on two large cancer whole slide images datasets and our results suggest that the proposed approach is more effective and suitable for large datasets and has better interpretability in locating important patterns and features that contribute to accurate cancer survival predictions. The proposed framework can also be used to assess individual patient's risk and thus assisting in delivering personalized medicine. Codes are available at https://github.com/uta-smile/DeepAttnMISL_MEDIA.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Massively Parallelizable Approach for Evaluating Signalized Arterial Performance Using Probe-based data
Authors:
Subhadipto Poddar,
Pranamesh Chakraborty,
Anuj Sharma,
Skylar Knickerbocker,
Neal Hawkins
Abstract:
The effective performance of arterial corridors is essential to community safety and vitality. Managing this performance, considering the dynamic nature of demand requires updating traffic signal timings through various strategies. Agency resources for these activities are commonly scarce and are primarily by public complaints. This paper provides a data-driven prioritization approach for traffic…
▽ More
The effective performance of arterial corridors is essential to community safety and vitality. Managing this performance, considering the dynamic nature of demand requires updating traffic signal timings through various strategies. Agency resources for these activities are commonly scarce and are primarily by public complaints. This paper provides a data-driven prioritization approach for traffic signal re-timing on a corridor. In order to remove any dependence on available detection, probe-based data are used for assessing the performance measures. Probe-based data are derived from in-vehicle global positioning system observations, eliminating the need for installing on-field traffic infrastructure. The paper provides a workflow to measure and compare different segments on arterial corridors in terms of probe-based signal performance measures that capture different aspects of signal operations. The proposed method can serve as a tool to guide agencies looking to alter their signal control. The methodology identifies a group of dynamic days followed by evaluation of travel rate based upon non-dynamic days. Dynamic days represent the variability of traffic on a segment. Performance measures on non-dynamic days include Median Travel Rate, Within-Day Variability of travel rate, between-days variability of travel rate Minimum Travel Rate Dispersion, and two variables which include Overall Travel Rate Variabilities. Consequently, a corridor having high number of dynamic segments along with poor performance during normal days would be a candidate for adaptive control. A case study was conducted on 11 corridors within Des Moines, Iowa where Merle Hay Road and University Avenue were identified suitable for adaptive control.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
A non-main-sequence secondary in SY Cancri
Authors:
R. C. Smith,
O. Mehes,
D. Vande Putte,
N. A. Hawkins
Abstract:
Simultaneous spectroscopic and photometric observations of the Z Cam type dwarf nova SY Cancri were used to obtain absolute flux calibrations. A comparison of the photometric calibration with a wide slit spectrophotometric calibration showed that either method is equally satisfactory. A radial velocity study of the secondary star, made using the far red NaI doublet, yielded a mass ratio q = 0.68…
▽ More
Simultaneous spectroscopic and photometric observations of the Z Cam type dwarf nova SY Cancri were used to obtain absolute flux calibrations. A comparison of the photometric calibration with a wide slit spectrophotometric calibration showed that either method is equally satisfactory. A radial velocity study of the secondary star, made using the far red NaI doublet, yielded a mass ratio q = 0.68; this is very different from the value of 1.13 quoted in the literature. Using the new lower mass ratio, and constraining the mass of the white dwarf to be within reasonable limits, then leads to a mass for the secondary star that is substantially less than would be expected for its orbital period if it satisfied a main-sequence mass-radius relationship. We find a spectral type of M0 that is consistent with that expected for a main-sequence star of the low mass we have found. However, in order to fill its Roche lobe, the secondary must be significantly larger than a main sequence star of that mass and spectral type. The secondary is definitely not a normal main-sequence star.
△ Less
Submitted 3 June, 2005;
originally announced June 2005.
-
A spectroscopic search for faint secondaries in cataclysmic variables
Authors:
D. Vande Putte,
Robert Connon Smith,
N. A. Hawkins,
J. S. Martin
Abstract:
The secondary in cataclysmic variables (CV's) is usually detected by cross-correlation of the CV spectrum with that of a K or M dwarf template, to produce a radial velocity curve. Although this method has demonstrated its power, it has its limits in the case of noisy spectra, such as are found when the secondary is faint. A method of co-adding spectra, called skew map**, has been proposed in t…
▽ More
The secondary in cataclysmic variables (CV's) is usually detected by cross-correlation of the CV spectrum with that of a K or M dwarf template, to produce a radial velocity curve. Although this method has demonstrated its power, it has its limits in the case of noisy spectra, such as are found when the secondary is faint. A method of co-adding spectra, called skew map**, has been proposed in the past. Gradually, examples of its application are being published. Nonetheless, so far no journal article has described the technique in detail. To answer this need, this paper explores in detail the capabilities of skew map** when determining the amplitude of the radial velocity for faint secondaries. It demonstrates the method's power over techniques that are more conventional, when the signal-to-noise (s/n) ratio is poor. The paper suggests an approach to assessing the quality of results. This leads in the case of the investigated objects to a first tier of results, where we find K2=127+-23 km/s for SY Cnc, K2=144+-18 km/s for RW Sex, and K2=262+-14 km/s for UX UMa. These we believe to be the first direct determinations of K2 for these objects. Furthermore, we also obtain K2=263+-30 km/s for RW Tri, close to a skew map** result obtained elsewhere. In the first three cases, we use these results to derive the mass of the white dwarf companion. A second tier of results includes UU Aqr, EX Hya, and LX Ser, for which we propose more tentative values of K2. Clear failures of the method are also discussed (EF Eri, VV Pup, SW Sex).
△ Less
Submitted 25 February, 2003;
originally announced February 2003.
